1
FASTENER GUIDEWURTH WOOD GROUP
QUICK FASTENER INFORMATION ASSEMBLY & DRYWALL SCREWS POCKET HOLE/FACE FRAME SCREWS INSTALLATION SCREWS DRAWER FRONT ADJUSTING SCREWS HARDWARE SCREWS MACHINE SCREWS EURO SCREWS WASHERS DRAW BOLTS CONNECTING SCREWS INSERT BITS BIT HOLDERS NAILS AND BRADS STAPLES AND PINS
INDEX
34-567789999910101111
3
Drives
AWPatented drive system which eliminates spin/cam out
PhillipsMost common drive for wood applications
Robertson®
Square DriveImproves engagement and reduces spin/cam out
Recex® ComboSquare/Phillips combo drive provides high torque and reduces spin/cam out
Pozi Provides higher torque in hand driving operations
Phillips/Slotted Primarily found in truss head machine screws
Heads
Threads
FASTENER GUIDE
Flat Flat with Nibs
PanFillister Round Washer
Low Profile Round
Washer
TrussModified Truss
Bugle Trim Undercut
Points
Standard Type 17 Drill Needle Blunt ASSY Plus Drill
ASSY® PLUS patented Asymmetrical/Symmetrical plus a drill bit cutter head for clean, fast, non-splitting drive into all woods and near edges
Fine for general woodworking use primarily with hardwood - requires pre-drilling and pre-countersinking
Coarse for soft wood, MDF and particle board - best results require pre-drilling and countersinking
HI-LO multi-purpose thread designed for greater holding and less strip-out in all woods
Turbo serrated thread outperforms Type 17 fasteners, reduces splitting - virtually eliminates pre-drilling/countersinking
Twinfast twin lead screw primarily used in hardwoods
Machine Screws M4/8-32 for attaching decorative hardware
4
ASSY 3.0 Plus
• Pre-drills and self-countersinks in solid wood without splitting • Flat head, coarse thread, AW drive • Drill tip, thin shank and nibbed head make this screw
particularly well suited for MDF, particleboard or solid wood • Nibs also allow easy, clean countersinking
size box qty zinc #8 x 1 ” 500 016510430#8 x 1 ” 500 016510435#8 x 1 ” 500 016511440#8 x 1¾” 500 016511445#8 x 2” 500 016511450#8 x 2 ” 250 016510460#8 x 2¾” 200 016510470#9x 3 ' 200 0165104580
size box qty zinc #8 x 1” 1,000 017014025#8 x 1 ” 500 017014030#8 x 1 ” 500 017014035#8 x 1 ” 500 017014040#8 x 1¾” 500 017014045#8 x 2” 500 017014050#8 x 2 ” 250 017014060#8 x 2¾” 200 017014070
ASSY Ecofast
• Flat head, coarse thread, AW drive screws with nibs • For particleboard, MDF and melamine • Nibs allow easy, clean counter-sinking into composite
materials • Thin shank and nibbed head reduce splitting
Flat Head#2 Recex® Combo DriveNibs and Type 17 PointCoarse Thread
size box qty black zinc
#8 x 1” 1,000 — WW3682011,000 WW36715 —
#8 x 1¼” 1,000 WW36720 WW368229,000 WW36725 WW36830
#8 x 1½” 1,000 — WW368357,000 WW36735 WW36840
#8 x 1¾” 4,800 WW36755 —
#8 x 2” 1,000 — WW368704,000 WW36765 WW36875
#8 x 2¼” 3,500 — WW36885
#8 x 2½”1,000 — WW368902,500 WW36785 WW36895
#8 x 3” 2,000 WW36793 WW36910
ASSEMBLY SCREWS
Flat Head#2 Robertson® Square DriveNibs and Type 17 PointCoarse Thread
size box qty black zinc
#8 x 1“ 1,000 WW37100 WW3160011,000 WW37120 WW31700
#8 x 1¼” 1,000 WW37140 WW318009,000 WW37160 WW31900
#8 x 1½” 1,000 WW37180 WW388007,000 WW37200 WW38900
#8 x 1 ”1,000 WW37220 WW390005,500 WW37240 WW39100
#8 x 1¾”1,000 WW37260 WW391104,800 WW37265 WW39120
#8 x 2”1,000 WW37280 WW392004,000 WW37300 WW39300
#8 x 2¼” 1,000 WW37305 WW394003,500 WW37310 WW39500
#8 x 2½” 1,000 WW37340 WW397102,500 WW37350 WW39715
#8 x 3”1,000 WW37380 WW398002,000 WW37390 WW39900
ASSY 3.0 Plus ScrewsPre-drills and self-countersinks in solid wood without splitting. Flat-head, coarse thread, AW drive. Drill tip, thin shank and nibbed head make this screw particularly well suited for MDF, particleboard or solid wood. Nibs also allow easy, clean countersinking.
Want to see the ASSY 3.0 in action?
5
size box qty black#8 x ¾“ 1,000 WW30605#8 x 1“ 1,000 WW30615
#8 x 1¼“ 1,000 WW306259,000 WW30630
#8 x 1½“ 1,000 WW30635#8 x 1¾“ 1,000 WW30645#8 x 2“ 1,000 WW30655#8 x 3” 2,000 WW30680
Flat Head#2 Robertson® Square DriveCoarse Thread
Flat Head#2 Phillips DriveCoarse Thread
size box qty black#8 x 1 1,000 WW38340
#8 x 1¼”1,000 WW383509,000 WW38355
#8 x 1½” 1,000 WW383607,000 WW38365
#8 x 1 ” 5,500 WW38375#8 x 2” 4,000 WW38395#8 x 2½” 2,500 WW38415#8 x 3” 2,000 WW38430
ASSEMBLY & DRYWALL SCREWS
size box qty zinc #8 x 2½” 2,000 WW39770#8 x 3” 1,500 WW39785#10 x 3” 500 WW39370
Round Washer Head#2 Recex® Combo DriveCoarse Thread
size box qty black zinc #8 x 1” 1,000 WW34200 —
#8 x 1¼” 1,000 WW34240 WW302009,000 WW34260 WW30300
#8 x 1½” 1,000 WW34280 WW304007,000 WW34300 WW30500
#8 x 1 ” 5,500 WW34340 WW30700
#8 x 1¾” 1,000 WW34350 —4,800 WW34360 —
#8 x 2”1,000 WW34400 —4,000 WW34420 WW30900
#8 x 2¼” 3,500 WW34460 —
#8 x 2½” 1,000 WW34480 —2,500 WW34500 WW31300
#8 x 3” 2,000 WW34580 WW31500
Flat Head#2 Phillips DriveNibs and Type 17 PointCoarse Thread
6
POCKET HOLE/FACE FRAME SCREWS
size box qty lube
#7 x 1¼” 1,000 WW150007,500 WW15100
#7 x 1½” 1,000 WW152006,000 WW15300
Fillister Head #2 Robertson® Square DriveType 17 PointHI-LO Thread
Fillister Head #2 Robertson® Square DriveExtra Long Type 17 PointCoarse Thread
size box qty lube
#7 x 1¼” 1,000 WW170007,500 WW17100
#7 x 1½” 1,000 WW172006,000 WW17300
size box qty lube
#7 x 1¼” 1,000 WW160007,500 WW16100
#7 x 1½” 1,000 WW162006,000 WW16300
Fillister Head #2 Robertson® Square DriveType 17 PointFine Thread
Pan Head#2 Robertson® Square DriveType 17 PointFine Thread
size box qty black
#6 x 1¼” 1,000 WW1250010,000 WW12520
#6 x 1½” 1,000 WW12800
Pan Head#2 Robertson® Square DriveType 17 Point Coarse Thread
size box qty black
#7 x 1¼” 1,000 WW120007,500 WW12100
#7 x 1½” 1,000 WW122006,000 WW12300
size box qty black zinc#8 x 1” 1,000 WW18300 —
#8 x 1¼” 1,000 WW18500 WW185107,000 WW18520 —
#8 x 1½” 1,000 WW18600 —5,000 WW18620 WW39753
#8 x ¾” 1,000 — WW55500
Round Washer Head#2 Recex Combo DriveType 17 PointCoarse Thread
size box qty lube#7 x 1¼” 1,000 WW18705
Round Washer Head#2 Robertson® Square DriveType 17 PointFine Thread
diameter box qty zinc # 8 x ¾” 1000 WW39396# 8 x 1” 1000 WW39398# 8 x 1 ¼” 1000 WW39399# 8 x 1 ½” 1000 WW39754# 8 x 2” 1000 WW39761# 8 x 2 ½” 1000 WW39771# 8 x 3” 1000 WW39786
Round Washer Head#2 Recex® Combo DriveType 17 Point Coarse Thread
7
INSTALLATION SCREWS, DRAWER FRONT ADJUSTING SCREWS
Painted Round Washer Head#3 Recex® Combo DriveType 17 PointCoarse Thread
size box qty white#10 x 3” 1,000 WW39335
3” Lag boltWS Type
diameter box qty zinc ” 100 WW37000
Painted Truss Head#3 Phillips DriveCoarse Thread
size box qty zinc #10 x 2½” 1,500 WW39360#10 x 3” 500 WW39370
Modified Truss Head#2 Recex® Combo DriveType 17 PointCoarse Thread• ½” OD Washer
size box qty zinc #8 x 1” 1,000 WW81200#8 x 1 ” 1,000 WW81500
#8 x1¼”1,000 WW818006,500 WW81900
Modified Truss Head#2 Phillips DriveType 17 PointCoarse Thread• ½” OD Washer
size box qty zinc #8 x 1” 1,000 WW80330#8 x 1 ” 1,000 WW80450#8 x 1¼” 1,000 WW80750
8
HARDWARE SCREWS
size box qty nickel zinc #6 x ½” 1,000 WW54200 WW42100
#6 x ”1,000 WW54375 WW423005,000 WW54380 WW42390
#6 x ¾” 1,000 WW54680 WW425005,000 WW54690 —
#6 x 1” 1,000 WW54900 WW38120#7 x ” 1,000 WW46800 —#7 x ¾” 1,000 WW43700 —
Flat Head, #2 Phillips Drive, Coarse ThreadFlat Head#2 Phillips Drive Type 17 PointCoarse Thread
size box qty zinc #6 x ½” 1,000 WW54360#6 x ” 1,000 WW43000#6 x ¾” 1,000 WW43100#8 x ” 1,000 WW38435#8 x ¾” 1,000 WW38445
Flat Head#1 Robertson® Square DriveType 17 PointCoarse Thread
size box qty zinc #6 x ” 1,000 WW53250#6 x ¾” 1,000 WW53400
Pan Head, #2/*#3 Phillips Drive , Type 17 Point, Coarse Thread
size box qty nickel zinc #6 x ½” 1,000 — WW45230#6 x ” 1,000 — WW45340#8 x ” 1,000 — WW45560#8 x ¾” 1,000 — WW46500#10x ¾” 1,000 WW45820 —
Modified Truss Head#2 Phillips DriveCoarse Thread
size box qty zinc #8 x ½” 1,000 WW46750
Truss Head#2 Phillips DriveType 17 PointCoarse Thread
size box qty zinc #8 x ¾” 1,000 WW58140
Truss Head, #2 Phillips Drive, Coarse Thread*
size box qty zinc #8 x ” 1,000 WW46000
*works well with PRO 2.0, PRO100/200 ball bearing slides
9
MACHINE SCREWS, EURO SCREWS, DRAW BOLTS, WASHERS
size box qty zinc 8-32 x 1” 1,000 WW473208-32 x 1 ” 1,000 WW474208-32 x 1¼” 1,000 WW475208-32 x 1½” 1,000 WW477208-32 x 1 ” 1,000 WW478208-32 x 1¾” 1,000 WW47920
Truss HeadPhillips/Slotted Drive8-32 Thread
Truss Head#2 Phillips/Slotted Drive8-32 Breakaway Thread
size box qty zinc 8-32 x 1¾” 1,000 WW48720M4 x 45mm 1,000 WW48920
Hex Draw Bolts
• Designed for countertop installations• Zinc Finish
length thread box qty item 3½” ¼” -20 500 WW497004” ¼” -20 350 WW49610
Finish Cup Washers
• No. 8 for #6 and #7 head screws
size box qty nickel black#8 1,000 WW49125 WW49175
Flat HeadPOZI Drive
size box qty nickel5 x 10mm 1,000 WW600005 x 11.5mm 1,000 WW601005 x 13mm 1,000 WW60200
CONNECTING SCREWS
Flat HeadPOZI Drive with HoleBlunt Point
size box qty zinc 7 x 50mm 2,000 WW70440 size box qty zinc
7 x 50mm 2,500 WW70460
Flat Head POZI Drive with HoleNibsSharp Point
Wurth Zip Bolt• Designed for faster countertop installations, no more struggling with a wrench• Zinc Finish
length box qty item 4” 60 WW49800
10
Phillips Power Drivers size item2 x 1” WW922102 x 2¾” WW922302 x 6” WW92260
Square Power Drivers
• #2 Robertson® square drive
size item#2 x 1” WW93210#2 x 2” WW93220#2 x 2 ¾” WW93230#2 x 4½” WW93245#2 x 6” WW90260
size item#2 x 3½” WW93235
Double Power Drivers
• No. 2 Recess both ends• Robertson Square Drive
Pozi Drive Insert Bitssize item2 x 1” WW952102 x 2” WW95220
Quick Change Bit Holder • Quick-change mechanism provides a firm connection between the holder and the bit• Only a slight forward motion of the locking sleeve is needed to unlock the bit for a quick change
description length item magnetic 3” 614176708for double end bits 2¼” WW99010
Magnetic Bit Holder
• High energy magnet alleviates the problem of lost bits• 3” overall length
description item for 1” long insert bits WW99005
INSERT BITS AND BIT HOLDERS
size item#2 x 3½” WW92235
Double Power Drivers
• No. 2 Hex on both ends• 1/4 Hex #2 Phillips Drive
Assy Bit
description item Assy Bit 6145120
11
Slight Head Brad Nails, 18 Gauge
Fits Tools: Würth 703546; Same as Brad Nails 18 Gauge
length box qty item ” 5,000 N18063B
¾” 5,000 N18075B1” 5,000 N18100B
Angled Finish Nails, 15 Gauge
Fits Tools: Senco FinishPro 41XP; Air Free 41XP; FinishPro 35, SFN2B, SFN30, SFN40, SNI; Porter Cable DA250B and similar models
length box qty item 1½” 4,000 N15150E1¾” 4,000 N15175E2” 4,000 N15200E2½” 4,000 N15250E
length box qty item ” 5,000 N18063A
¾” 5,000 N18075A1” 5,000 N18100A1¼” 5,000 N18125A1½” 5,000 N18150A1¾” 5,000 N18175A2” 5,000 N18200A
Finish Nails, 18 Gauge
Fits Tools: Würth 703546; Senco FinishPro 25XP, FinishPro18, FinishPro15, FinishPro 2N1, AF25, SLP20, Any Senco AX tool; Porter Cable BN125A, BN200A ; Bostitch BT125K-2, BT200K-2, SB-1850BN Fasco F21P GN-31A, F21T GN-40A and similar models
Finish Nails, 16 Gauge
Fits Tools: Würth 703545 ; Senco: FP32; Porter Cable: FN250B, CFN250B; Bostitch: FN16550K-2, SB-1664FN; Fasco: F3T FN-70 CT and similar models
length box qty item 1” 5,000 N16100D1¼” 5,000 N16125D1½” 5,000 N16150D1¾” 5,000 N16175D2” 5,000 N16200D
NAILS, BRADS, STAPLES AND PINS
crown length box qty item
¼”
½” 5,000 S18050KT” 5,000 S18063KT
¾” 5,000 S18075KT” 5,000 S18088KT
1” 5,000 S18100KT1 ” 5,000 S18113KT1¼” 5,000 S18125KT1½” 5,000 S18150KT
”
½” 5,000 S18050M” 5,000 S18063M
¾” 5,000 S18075M1” 5,000 S18100M
18 Gauge Staples
Fits Tools: Würth 703555, 7035551; Porter Cable NS150A, NS100; Senco FinishPro 2N1, LN4450, KMN4450, SLS25XP, SLS20L, SLS15L, SLS18L, SLS18NR, SKS-L; Fasco F21P 90-25A, F21T 90-40A, F3C 90-40CT and similar models
Micro Brads, 23 Gauge
Fits Tools: Würth 11191F
length box qty item ” 10,000 N23088B
1” 10,000 N23100B1 ” 10,000 N23119B1 ” 10,000 N23138B
Headless Micro Pins, 23 Gauge
Fits Tools: Würth 11191F; Porter Cable PIN100; Senco FinishPro10, SHP10; Fasco F1B A64-12/18 and similar models.
length box qty item ½” 10,000 N23050F10
” 10,000 N23058F10¾” 10,000 N23075F101” 10,000 N23100F10
ATLANTA GA5075 N. Buford Hwy, Ste. 100Norcross, GA 30071678.924.0386FAX 678.924.0391
BALTIMORE MD6660 Santa Barbara RoadElkridge, MD 21075410.796.7600FAX 410.796.7729
BIRMINGHAM AL 1640 Mims Ave., SW Birmingham, AL 35211 205.925.7601 Fax 205.923.9511
CHARLESTON SC4325 Lear AvenueN. Charleston, SC 29418843.529.0808FAX 843.529.0805
CHARLOTTE NC4250 Golf Acres DriveCharlotte NC 28208704.394.9479FAX 704.398.2162
CHATTANOOGA TN234 Direct Connection DriveRossville, GA 30741706.891.2000FAX 706.891.4229
DECATUR AL 723 Old Trinity Road Decatur, AL 35601 256.355.3161 FAX 256.355.0073 GREENSBORO NC201 S. Pendelton StreetHigh Point, NC 27260336.431.2712FAX 336.431.2750
GREENVILLE SC1441 Hwy 101 SouthGreer, SC 29652864.877.7328FAX 864.877.7413
MEMPHIS TN 5805 Advantage Cove Memphis, TN 38141 901.367.6699 FAX 901.367.4889
MOBILE AL 3440 Armour AveMobile, AL 36617251.378.0188 FAX 251.378.0190
MONTGOMERY AL 581 Trade Center Street Montgomery, AL 36108 334.265.6721 FAX 334.265.6725
NASHVILLE TN 634 Melrose AvenueNashville, TN 37211615.254.8719FAX 615.254.8521 NORFOLK VA3307 Chesapeake Blvd.Norfolk, VA 23513757.855.3908FAX 757.857.6133
RALEIGH NC4213 Poole RoadRaleigh, NC 27610919.231.6620FAX 919.231.9687
RICHMOND VA1701 Rhoadmiller StreetRichmond, VA 23220804.359.1374FAX 804.353.3206
ROANOKE VA3443 Aerial Way DriveRoanoke, VA 24018855.300.4455FAX 540.344.2306
TAMPA FL5102-B W. Hanna AvenueTampa, FL 33634800.432.1149FAX 813.887.1902
Some items shown may not be stocked in all branches. Please call for availability. We regret that we cannot be liable for pictorial, typographical, or errors.
Copyright© Wurth Wood Group 2016. All rights reserved.
www.wurthwoodgroup.comYou Decide, We Deliver1 877 GO WURTH
Fastener Guide 11/2016 - Ver. 1