Elevation / Élévation
FeatureLine 990
Fixed interior glazed window for ribbon or punched window
applications. FeatureLine 990 has a "capped" design that simulates
the appearance of a curtain wall.
Une fenêtre fixe vitrée de l'intérieur, utilisée comme fenêtre simple
ou en bande continue (Ruban). La fenêtre FeatureLine 990 affiche
une apparence de type "mur-rideau".
Typical Details / Détails typiques 2.3.3.1 - 2.3.3.5
2.3.3.0
Primary components
Composantes principales
2.3.1.1
Special Details / Détails spéciaux 2.3.3.6 - 2.3.3.8
Triple glazing details
Détails de triple vitrage
2.3.4.1
Thermal Simulation chart
Graphiques de simulation thermique
2.3.2.1 - 2.3.2.2
2.3.2.3 - 2.3.2.4
2.3.0
Index
99100
3
4
"
[19.1 mm]
4
1 4
"
[1
08
.0
m
m]
99500
3
4
"
[19.1 mm]
5"
[1
27
m
m]
3 4
"
[1
9.1
m
m]
99800
3
4
"
[19.1 mm]
5
3 4
"
[1
46
.1
m
m]
3 4
"
[1
9.1
m
m]
99300
3
4
"
[19.1 mm]
4
1 4
"
[1
08
mm
]
3 4
"
[1
9.1
m
m]
99700
3
4
"
[19.1 mm]
5"
[1
27
m
m]
3 4
"
[1
9.1
m
m]
3
4
"
[19.1 mm]
3 4
"
[1
9.1
m
m]
99900
5
3 4
"
[1
46
.1
m
m]
INTERMEDIATE HORIZONTALS / MULLIONS
TRAVERSES & MENEAUX INTERMÉDIAIRES
HEAD / SILL / JAMB
TÊTE / BASE / JAMBAGE
FeatureLine 990
Composantes principales
Primary components
2.3.1.1
15.03.2016
Index
2.1
0.45
REQUIRED CENTRE
OF GLASS U VALUE
NON METALLIC SPACER
1.59 W/m²K
1.7
1.4
1.5
1.6
1.9
1.8
2.0
2.2
2.1
2.3
2.4
2.5
0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.2 2.3 2.4
2.6
2.7
0.10 0.200.15 0.25 0.300.35 0.40
0.25
0.3
0.35
0.40
A
B
THE FOLLOWING THERMAL CHARTS ARE TO BE USED TO DETERMINE OVERALL U VALUE OF THE PRODUCT BY KNOWING U VALUE
CENTRE OF GLASS AND SELECTED SPACER OR DETERMINE CENTRE OF GLASS U VALUE AND SPACER BY KNOWING THE PRODUCT
REQUIREMENTS FOR U VALUE.
DETERMINE CENTRE OF GLASS U VALUE
1) Choose the total system U value from the chart below (vertical axis).
2) Based on this point come across horizontally until you reach the specific spacer bar (metallic or non-metallic)
3) From this point come down vertically until you reach the horizontal axis and your centre of glass U value
DETERMINE TOTAL SYSTEM U VALUE
1) Choose your centre of glass U value from the chart below (horizontal axis).
2) Based on this point come up vertically until you reach the specific spacer bar (metallic or non-metallic)
3) From this point come across horizontally until you reach the vertical axis and your total system U value
To
ta
l S
yste
m U
-fa
cto
r (W
/m²K)
To
ta
l S
yste
m U
-fa
cto
r (B
tu
/h
ou
r ft²°F)
Centre-of-glazing U-factor (Btu/hour ft²°F)
Centre-of-glazing U-factor (W/m²K)
Inside Air Temperature
21° C
ENVIRONMENTAL CONDITIONS: NFRC 100-2001
EXAMPLE:
Outside Air Temperature
-18° C
Outside Wind Speed
5.5 m/s
A = Double glazed with Generic Group1
-Spacer containing aluminum
B = Double glazed with Generic Group 4
-Spacer containing all non metallic materials
REQUIRED SYSTEM
U VALUE 2.0 W/m²K
ALUMINUM
SPACER BAR
NON METALLIC
SPACER BAR
CHART BASED ON 1" (25.4 mm)
DOUBLE GLAZED SEALED UNIT
REQUIRED CENTRE
OF GLASS U VALUE
ALUMINUM SPACER
1.44 W/m²K
POUR LA VERSION EN FRANÇAIS, VEUILLEZ VOIR LA PAGE : 2.3.2.3
FeatureLine 990
2.3.2.1
15.03.2016
Index
Thermal simulation chart - Reading guide
1.5
1.7
1.6
1.8
1.9
2.0
2.1
2.2
A
B
THE FOLLOWING THERMAL CHARTS ARE TO BE USED TO DETERMINE OVERALL U VALUE OF THE PRODUCT
BY KNOWING U VALUE CENTRE OF GLASS AND SELECTED SPACER OR DETERMINE CENTRE OF GLASS U
VALUE AND SPACER BY KNOWING THE PRODUCT REQUIREMENTS FOR U VALUE.
· Curves represent simulation results based on double glazing options using the lowest (curve A) and highest (curve B) performing
spacers. Spacer conductance values are based on nfrc 100-2010 section 5.9.5.1.
· Simulation methodology followed nfrc 100-2010
· Simulated window is 78
3
4
"(2000mm) x 78
3
4
"(2000mm) between mullion centres with one vertical central mullion as per nfrc100-2010
table 4.3.
· The charts should be used as a budget or design guide. For fenestration product u-factor and rating purposes.
Total S
ystem
U
-factor (W
/m²K
)
Total S
ystem
U
-factor (B
tu/hour ft²°F)
Centre-of-glazing U-factor (Btu/hour ft²°F)
Centre-of-glazing U-factor (W/m²K)
Inside Air Temperature
21° C
ENVIROMENTAL CONDITIONS: NFRC 100-2001
Outside Air Temperature
-18° C
Outside Wind Speed
5.5 m/s
A = Double glazed with Generic Group1
-Spacer containing aluminum
B = Double glazed with Generic Group4
-Spacer containing all non metallic materials
CHART BASED ON 1" (25.4 mm)
DOUBLE GLAZED SEALED UNIT
2.3
2.4
2.5
2.6
2.7
1.4
2.5 2.6 2.70.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4
0.40
0.45
0.25
0.30
0.35
0.15 0.20 0.25 0.300.35 0.40 0.45
POUR LA VERSION EN FRANÇAIS, VEUILLEZ VOIR LA PAGE : 2.3.2.4
FeatureLine 990
2.3.2.2
15.03.2016
Index
Thermal simulation chart - Double glazed
1,7
1,4
1,5
1,6
1,9
1,8
2,0
2,2
2,1
2,3
2,4
2,5
0,5 0,6 0,7 0,8 0,91
1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,92
2,1 2,2 2,3 2,4
2,6
2,7
0,10 0,15 0,20 0,25 0,300,35 0,40
0,25
0,3
0,35
0,40
0,45
A
B
LES GRAPHIQUES DE SIMULATION THERMIQUE SUIVANTS DOIVENT ÊTRE UTILISÉS POUR DÉTERMINER LA VALEUR U TOTALE DU PRODUIT
EN CONNAISSANT LA VALEUR U AU CENTRE DU VERRE AINSI QUE LE TYPE D'INTERCALAIRE CHOISI, OU POUR DÉTERMINER LA VALEUR U DU
CENTRE DE LA VITRE ET LE TYPE D'INTERCALAIRE EN CONNAISSANT LA VALEUR U EXIGÉE DU PRODUIT.
DÉTERMINER LA VALEUR U DU CENTRE DE LA VITRE
1) Choisir la valeur U totale dans le graphique ci-dessous (axe vertical).
2) En se basant sur ce point, se déplacer à l'horizontale jusqu'à l'intercalaire spécifique (métallique ou non-métallique).
3) À partir de ce point, passer à la verticale jusqu'à l'axe horizontal et votre valeur U au centre de la vitre.
DÉTERMINER LA VALEUR U TOTALE DU SYSTÈME
1) Choisir la valeur U au centre du verre dans le graphique ci-dessous (axe horizontal).
2) En se basant sur ce point, se déplacer verticalement vers le haut jusqu'à l'intercalaire spécifique (métallique ou non-métallique).
3) À partir de ce point, passer à l'horizontale jusqu'à l'axe vertical et votre valeur U totale du système.
Valeur U totale du système (W/m²K)
Valeur U totale du système (BTU/heure
pied²°F)
Valeur U au centre de la vitre (BTU/heure pied²°F)
Valeur U au centre du verre (W/m²K)
Temp. de l'air intérieur
21° C
CONDITIONS AMBIANTES : NFRC 100-2001
EXEMPLE :
Temp. de l'air extérieur
-18° C
Vitesse du vent extérieur
5.5 m/s
VALEUR U RECOMMANDÉE 2,0 W/m²K
INTERCALAIRE
ALU
INTERCALAIRE NON
MÉTALLIQUE
VALEUR U
REQUISE POUR CENTRE VITRE
INTERCALAIRE NON MÉTALLIQUE
1,59 W/m²K
VALEUR U
REQUISE POUR CENTRE VITRE
INTERCALAIRE ALU
1,44 W/m²K
A = Double vitrage avec groupe générique 1
- intercalaire contenant de l'aluminium
B = Double vitrage avec groupe générique 4
- intercalaire sans matériaux métalliques
GRAPHIQUE BASÉ SUR UN DOUBLE
VITRAGE SCELLÉ DE 1" (25,4 mm)
FOR ENGLISH VERSION PLEASE SEE PAGE: 2.3.2.1
FeatureLine 990
2.3.2.3
15.03.2016
Index
Graphiques de simulation thermique - Guide de lecture
1,7
1,4
1,5
1,6
1,9
1,8
2,0
2,2
2,1
2,3
2,4
2,5
2,6
2,7
0,15 0,20 0,25 0,30 0,350,40 0,45
0,25
0,30
0,35
0,40
0,45
LES GRAPHIQUES DE SIMULATION THERMIQUE SUIVANTS DOIVENT ÊTRE UTILISÉS POUR DÉTERMINER LA VALEUR U TOTALE DU PRODUIT
EN CONNAISSANT LA VALEUR U AU CENTRE DU VERRE AINSI QUE LE TYPE D'INTERCALAIRE CHOISI, OU POUR DÉTERMINER LA VALEUR U DU
CENTRE DU VERRE ET LE TYPE D'INTERCALAIRE EN CONNAISSANT LA VALEUR U EXIGÉE DU PRODUIT.
· Les courbes représentent les résultats de simulations effectuées par des laboratoires indépendants en fonction des options de double vitrage
utilisant les intercalaires les moins performants (courbe a) et les intercalaires les plus performants (courbe b). Les valeurs de conductance
thermique des intercalaires sont fondées sur la norme nfrc 100-2010, section 5.9.5.1.
· La méthodologie employée pour la simulation était conforme à la norme nfrc 100-2010.
· La fenêtre employée pour la simulation mesurait 78
3
4
"(2000mm) x 78
3
4
"(2000mm) entre les centres des meneaux avec un meneau central
vertical conformément à la norme nfrc 100-2010, tableau 4.3.
· Les graphiques doivent être utilisés comme guide pour l'établissement du budget ou pour la conception architecturale, pour déterminer la
valeur u du produit de vitrage et afin d' établir les caractéristiques nominales.
Valeur U
totale du systèm
e (W
/m²K
)
Valeur U
totale du systèm
e (B
TU
/heure pied²°F)
Valeur U au centre de la vitre (BTU/heure pied²°F)
Valeur U au centre du verre (W/m²K)
Temp. de l'air intérieur
21° C
CONDITIONS AMBIANTES : NFRC 100-2001
Temp. de l'air extérieur
-18° C
Vitesse du vent extérieur
5,5 m/s
GRAPHIQUE BASÉ SUR UN DOUBLE
VITRAGE SCELLÉ DE 1" (25,4 mm)
A = Double vitrage avec groupe générique 1
- intercalaire contenant de l'aluminium
B = Double vitrage avec groupe générique 4
- intercalaire sans matériaux métalliques
FOR ENGLISH VERSION PLEASE SEE PAGE: 2.3.2.2
2,5 2,6 2,70,8 0,9 1,0 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2,0 2,1 2,2 2,3 2,4
A
B
FeatureLine 990
2.3.2.4
15.03.2016
Index
Graphiques de simulation thermique - Double vitrage
5
6
2
3
8
7
9
10
16
18
14
12
FeatureLine 990
2.3.3.0
Elevations
Élévations
15.03.2016
Index
1
2
3
2
1 4
"
[5
7.2
m
m]
1
1 2
"
[3
8.1
m
m]
3 4
"
[1
9.1
m
m]
HEAD / TÊTE
SILL / BASE
5
3
4
"
[146.1 mm]
HORIZONTAL
TRAVERSE HORIZONTALE
RECOMMENDED TOP LOAD GASKET
RUBAN DE VITRAGE À INSERTION SUR
LE DESSUS RECOMMANDÉ
AVAILABLE WEDGE GASKET
RUBAN DE VITRAGE À CALE
DISPONIBLE MONTRÉ
EXTRUDED ALUMINUM
SILL 24580 SHOWN
ALLÈGE D'ALUMINIUM 24580
EXTRUDÉ MONTRÉ
FeatureLine 990
2.3.3.1
Typical details
Détails typiques
15.03.2016
Index
4
5
6
1
1
2
"
[38.1 mm]
5
3 4
"
[1
46
.1
m
m]
JAMB / JAMBAGE
MULLION / MENEAU
JAMB / JAMBAGE
2
1
4
"
[57.2 mm]
1
7
16
"
[3
6.5
m
m]
AVAILABLE GLASS STOP
96000 SHOWN
PARCLOSE 96000 DISPONIBLE
MONTRÉE
FeatureLine 990
2.3.3.2
Typical details
Détails typiques
15.03.2016
Index
14
13
11
12
HORIZONTAL
TRAVERSE HORIZONTALE
JAMB / JAMBAGE
MULLION / MENEAUSILL / BASE
2
1 4
"
[5
7.2
m
m]
1
1
2
"
[38.1 mm]
4
1 4
"
[1
08
.0
m
m]
WITH PHANTOM VENT 5000 / AVEC PHANTOM VENT 5000
3
3
16
"
[81.0 mm]
1
8
"
[3.2 mm]
FeatureLine 990
2.3.3.4
Typical details
Détails typiques
15.03.2016
Index
2
1 4
"
[5
7.2
m
m]
5
3
4
"
[146.1 mm]
6
5 8
"
[1
68
.3
m
m]
3
4
"
[19.1 mm]
2
1
4
"
[57.2 mm]
15
MULLION / MENEAU
16
MULLION / MENEAU
18
SILL / BASE
17
HEAD / TÊTE
WITH ROTOVENT SV 2000 / AVEC VENTILATEUR ROTOVENT SV 2000
FeatureLine 990
2.3.3.5
Typical details
Détails typiques
15.03.2016
Index
SILL / BASE
HORIZONTAL
TRAVERSE HORIZONTALE
HEAD / TÊTE
1
2
3
5"
[127 mm]
2
1 4
"
[5
7.1
m
m]
OPTIONAL
1
4
"(6.4mm) GLAZING
STOP FOR EXTERIOR
PARCLOSE EXTÉRIEURE POUR
VERRE DE ¼”(6,4mm) DISPONIBLE
FeatureLine 990
2.3.3.6
Special details - sull sash window
Détails spéciaux - fenêtre fixe avec châssis
15.03.2016
Index
MULLION / MENEAU
5
JAMB / JAMBAGE JAMB / JAMBAGE
4 6
5"
[1
27
.0
m
m]
FeatureLine 990
2.3.3.7
Special details - sull sash window
Détails spéciaux - fenêtre fixe avec châssis
15.03.2016
Index
1
HEAD / TÊTE
2
SILL / BASE
5
3
4
"
[146.1 mm]
1
1
2
"
[3
8.1
m
m]
NOTE:
Strap anchors may be used for windload anchoring only and must not be subjected to dead load.
Anchors are available in stock length 7.3 m (24') form and may be cut to the length necessary for your project.
Attachment to the fixed frame is through any perimeter screw port allowing the anchor to pivot in order to
accommodate variances in clearance.
Les ancrages doivent être utilisés comme ancrage de résistance au vent uniquement et ne doivent pas être soumis à
des charges permanentes.
Les ancrages sont disponibles en longueur standard de 7.3 m (24') et peuvent être coupés à la longueur nécessaire
pour votre projet.
La fixation au cadre de fenêtre fixe se fait par les trous de vis de périmètre permettant à l'ancrage de pivoter afin de
respecter différentes variations de dégagement.
FeatureLine 990
2.3.3.8
Special details - strap anchor
Détails spéciaux - fenêtre ancrage extrudé
15.03.2016
Index
1
2
3
5
3
4
"
[146.1 mm]
2
1 4
"
[5
7.2
m
m]
1
1
2
"
[3
8.1
m
m]
HEAD / TÊTE
SILL / BASE
TWO PIECE STOP REQUIRED
FOR ANY GLAZING THICKER
THAN 1"(25.4mm) OVERALL
BUTOIR À DEUX PIÈCES
REQUIS POUR TOUT TYPE
DE VITRAGE EXCÉDANT
1''(25,4mm) D'ÉPAISSEUR
TOTALE
HORIZONTAL
TRAVERSE HORIZONTALE
FeatureLine 990
2.3.4.1
Triple glazing details
Détails de triple vitrage
15.03.2016
Index