Fiber Optic Connectors
Basics, Styles, Trends
-Troy Bowen, JFC Solutions
Confidential
Agenda
History and Market
Standards
Construction and Fiber Types
– Connector typical components
Performance Definitions and Measurement
Connector Types
Applications
– Future
Product Spotlight - Leviton FastCAM Connector
Confidential
History
1965 - Charles K. Kao and George A. Hockham of the British company
Standard Telephones and Cables demonstrated that optical fiber could be a
practical medium for communication, if the attenuation could be reduced below 20
dB per kilometer
1970 - Researchers Robert D. Maurer, Donald Keck, Peter Schultz, and
Frank Zimar working for American glass maker Corning Glass Works. They
manufactured a fiber with 17 dB optic attenuation per kilometer by doping silica
glass with titanium.
1977 - On April 22, General Telephone and Electronics sent the first live
telephone traffic through fiber optics, at 6 Mbit/s, in Long Beach, California.
1986 - The erbium-doped fiber amplifier, which reduced the cost of long-
distance fiber systems by eliminating the need for optical-electrical-optical
repeaters, was invented by David Payne of the University of Southampton,
and Emmanuel Desurvire at Bell Laboratories.
And the industry and applications have exploded since!!!
Confidential
The Market
There are 110 design types of Fiber Optic connectors.
Total factory shipments of Fiber Optic connectors were $1.273
billion in 2005 and are projected to reach $1.976 billion by the
year 2010.
Copyright © 2006, Fleck Research, Global Connector Research Group, Inc.
Confidential
Connector Standards
TIA/EIA-4750000-B Generic Specification for Fiber Optic Connectors
TIA/EIA-604 Fiber Optic Connector Intermateability Standards (FOCIS)
www.tiaonline.org
GR-326 Generic Requirements for Single-Mode Optical Fiber
Connectors GR-1435
Generic Requirements for Multi-fiber Optical Connectors
www.telcordia.com
Confidential
The Glass
Typical Construction
Example: 8/125μm•Core 8 micron diameter•Cladding 125 micron diameter
Confidential
The Glass
Single-mode – 8/125μm
Fiber supporting only one mode is called single-mode
Default Premises Cable Jacket Color = Yellow
Uses Lasers to transmit signal
The laser can be multiplexed in order to send many
different signals down one fiber.
1310 and 1550nm are the most common wavelengths
Single-mode systems can send a signal much faster and for
longer distance than multimode systems.
Confidential
The Glass
Multimode - 62.5/125μm and 50/125μm Fiber with large (greater than 10μm) core diameter is called
multimode fiber Default Premises Cable Jacket Color = Orange or Aqua (for laser
optimized fibers) The first multimode fiber size was 100/140μm. These larger sizes are
currently used for instrumentation applications. Uses LED’s to transmit signal
850nm and 1310nm are the most common wavelengths LED’s can not be multiplexed
Primarily used in short distance communication (LAN) Less than 2km
Confidential
Single-mode – Multimode Comparison
Confidential
The Connector
Fiber optic connectors have traditionally been the biggest
concern in using fiber optic systems.
Connectors were once unwieldy and difficult to use.
Connector manufacturers have standardized and
simplified connectors greatly.
This increasing user-friendliness has contributed to the
increase in the use of fiber optic systems
The sole purpose of a connector is to mate fiber-optic
cable with minimal loss of light.
Connectors are designed for many different applications
including telecommunications, local area networks, and
harsh environments.
Confidential
Connector Basics
The Connector Body
Also called the connector housing, the connector body holds the ferrule.
Usually constructed of metal or plastic and includes one or more assembled pieces which hold the fiber in place.
Details vary among connectors, but bonding and/or crimping is commonly used to attach strength members and cable jackets to the connector body.
The ferrule extends past the connector body to slip into a coupling device
Confidential
Connector Basics
The Cable The cable is attached to the connector body. Typically, a strain-relief boot is added over the junction
between the cable and the connector body, providing extra strength to the junction.
Confidential
Connector Basics
The Ferrule The fiber is mounted in a long, thin cylinder, the ferrule, which
acts as a fiber alignment mechanism. The ferrule is bored through the center at a diameter that is
slightly larger than the diameter of the fiber cladding. The end of the fiber is located at the end of the ferrule.
Ferrules are typically made of metal or ceramic, but they may also be constructed of plastic.
The most distinct differentiations between connector types are the diameter of the ferrule, 2.5 mm or 1.25 mm, and the type of polish.
Confidential
Coupling of Connectors
The Coupling Device Most fiber optic connectors do not use the male-female
configuration common to electronic connectors. Instead, a coupling device such as an alignment sleeve is
used to mate the connectors. Similar devices may be installed in fiber optic transmitters and
receivers to allow these devices to be mated via a connector. These devices are also known as feed-through bulkhead
adapters.
Confidential
Performance Measures
Insertion Loss (IL) is the amount of optical power lost as a
result of a connection. Expressed in decibels, it is the ratio of
measured optical power before and after the connector. It
always is tested because it is the most important connector
parameter.
Return Loss (RL) a term applied to the light reflection in the
connector’s interface that return to the source.
– The greater the absolute value, the better:
• Example: -60dB RL is better than -35dB RL.
Confidential
Performance Measures
Back Reflection represents the total accumulated light
reflected back to the source along a link. This return of the
light is due to different physical phenomena such as
multiple connector back-reflections, bad splicing, etc. Some effects of back reflection include the following:
– Less light is transmitted
– Causes interference with light source signals
– Creates higher bit error rate (BER) in digital systems
– Reduces signal-to-noise ratio (SNR) in analog systems
• CATV systems virtually standardize on APC type connectors
High back reflection can cause bad or harmful consequences such as:
– Causes fluctuations in the light source’s central wavelength
– Causes fluctuations in its output power
– Damages the light source (transmitter) permanently
Confidential
Connector Loss
Connector loss is caused by a number of factors.
Loss is minimized when the two fiber cores are identical and
perfectly aligned, the connectors are properly finished and no
dirt is present.
Only the light that is coupled into the receiving fiber's core will
propagate, so all the rest of the light becomes the connector
loss.
Confidential
Types of Polishes
The polish on a fiber connector dictates the amount of back reflection.
Back reflection is a measure of the light reflected off the polished end of a fiber connector measured in negative dB.
The physical-contact (PC) polish is a flat finish of the connecting area
The angled physical contact (APC) is at an 8° angle. An APC greatly reduces back reflections caused by the
physical interface.
Confidential
Connector Styles
Anaerobic Adhesives: These connectors use a quick setting
adhesive. They work well if your technique is repeatable, but
often they do not have the wide temperature range of epoxies,
so they are only used indoors. Thus, generally used for
factory terminations only.
Epoxy/Polish: These connectors are the simple
"epoxy/polish" type where the fiber is glued into the connector
with epoxy and the end polished with special polishing film.
These provide a very reliable connection with low losses.
They can be factory or field installed.
Confidential
Connector Styles
Crimp/Polish: Rather than glue the fiber in the connector,
these connectors use a crimp on the fiber to hold it in. Early
types offered "iffy" performance, but today they are pretty
good, if you practice a lot. Expect to trade higher losses for
the faster termination speed. And they are more costly than
epoxy polish types.
Pre-Polished: Many manufacturers offer connectors that
have a short stub fiber already epoxied into the ferrule and
polished perfectly, so you just cleave a fiber and insert it like a
splice. While it sound like a great idea, it has several
downsides. First it is very costly, 2 to 3 times as much as an
epoxy polish type. Second, you have to make a good cleave
to make them low loss.
Confidential
Connector Types – Biconic (FOCIS 1)
The Biconic connector was developed by AT&T and became
the de facto standard for long haul telecommunications.
The Biconic connector features a cone-shaped tip, which holds
a single fiber.
It is non-metallic, using polymer and epoxy in its construction.
Telcos have long since adopted other connectors, mainly the
SC due to the drawbacks of the Biconic such as its large size
and the fact that it is mated by screwing it into its coupling.
Screw coupling makes its performance sensitive to rotational
changes.
Confidential
Connector Types – ST (FOCIS 2)
ST stands for Straight Tip - a quick release style connector
developed by AT&T. ST’s were the predominant connector in
the late 80s and early 90s.
ST Connectors are among the most commonly used fiber optic
connectors in networking applications. They are cylindrical with
twist lock coupling, 2.5mm keyed ferrule.
The ST connector has a bayonet mount and a long cylindrical
ferrule to hold the fiber. Because they are spring-loaded, you
have to make sure they are seated properly. If you experience
high light loss, try reconnecting.
Confidential
Connector Types – SC (FOCIS 3)
The SC (subscriber connector) was developed by NTT
specifically as a telecom connector.
It features push-pull coupling which eliminates rotation
which can damage fiber end-faces. This design also allows
higher packaging densities.
An important element of the design is an isolated ferrule,
which protects the ferrule and fiber from cable stresses.
The SC is available in the usual simplex configuration and
with duplex adapters as well.
For maximum density, quad and "six-pack“ configurations
are available.
Confidential
Connector Types – FC (FOCIS 4)
FC stands for Ferrule Connector or Fixed Connection.
The FC connector was developed by NTT as a singlemode
telecom connector.
It uses a combination of thread (screw-on) and keyed design
to provide high repeatability and good fiber endface
protection.
Confidential
Connector Types – MTP/MPO (FOCIS 5)
The MPO connector family is defined by two different standards.
Internationally the MPO is defined by IEC-61754-7. In the USA,
the MPO is defined by TIA-604-5 (FOCIS 5).
The MTP multi-fiber connector is US Conec’s trademarked name
for their MPO connector.
The MTP connector is fully compliant with both FOCIS 5 and IEC-
61754-7; therefore it is an MPO connector.
The MTP connector design is distinctly different than the MPO.
The MTP connector is a high performance MPO!
The MTP/MPO is a connector manufactured specifically for a
multifiber ribbon cable.
MPO = Multi-fiber Push On
Confidential
Connector Types – LC (FOCIS 10)
LC The LC is a small form-factor (SFF) fiber optic connector.
The LC connector uses a 1.25 mm ferrule, half the size of the ST or SC ferrule. Otherwise, it is a standard ceramic ferrule connector. The LC has good performance and is highly favored for singlemode and LO Multimode and has been gaining the preference of equipment manufacturers because of its compact size and performance.
Confidential
Other Connectors
SMA, D4, Mini-BNC, FDDI, ESCON, SCDC (Corning), Opti-
Jack (Panduit), VF-45 (3M Volition), E2000 / LX.5, ....
Proprietary – No License Available
Old / Never adopted by equipment manufactures
No wide spread acceptance in the market
Confidential
Leviton Fiber Connector Applications
FastCAM
(pre-polished)
Fast Cure
(adhesive)
ThreadLock
(mechanical)
Enterprise (indoors)
Outside Plant X? X
Harsh Environments (Industrial) X X
Patch Cords X X
Fast Installation Best Slow Medium
Craft Sensitiveness Lowest Medium/High Highest
Connector Types SC, ST, LC SC, ST, LC, FC SC, ST, FC
Fiber Types MM and SM MM and SM MM and SM
Reusable Limited NoVirtually
unlimited
Confidential
Applications / Trends
Private Networks (Enterprise)– Small to Medium Networks
• ST, SC are predominant– Large Networks
• ST, SC with LC growing rapidly– Data Centers
• LC and MTP dominate Public Networks (Service Providers)
– Telcos• SC with LC growing due to density
– CATV• FC, SC
Confidential
Future
Higher performance
– 10gig, 40gig, 100gig
Greater density (Data Centers)
OSP Capable (FTTH networks)
FTTx Advancements
– Fiber to the Home
– Fiber in the Home
– Fiber to the Wall Plate
– Fiber to the Desk
Demand for ease of use, greater durability and
repeatable performance over time will drive connector
technology!!!
Confidential
Introducing FastCAM Field Installable Fiber
Optic Connectors
Field Assembly – Simple Technique
Product Spotlight - FastCAM
Confidential
• Utilizes proven, precise mechanical splice technology.
• Eliminate the need for lengthy training of standard field termination.
• Install virtually anywhere. No epoxy curing. No electrical power.
• Low insertion loss and back reflection. High reliability.
• Can be re-terminated in order to re-position the fiber.
• Meets TIA/EIA 568B performance standards.
Fast CAM Product Benefits
The FASTEST installation.....period!
Confidential
FastCAM Connectors - features
Designed around proven molded v-groove technology
No polishing – it’s already done!
No epoxy curing- it’s in there!
SM and MM ST, SC, & LC industry standard interfaces
Universal design for 0.25mm & 0.9mm buffer sizes
Pre-stubbed factory polished connectors, with a
unique disposable clip design insures a FAST
termination, low loss & precision alignment. No tool!
ST
SC
LC
Confidential
FastCAM Details - mechanics
Pre-installed FiberFront Upper Body Back Upper Body
Matching Gel Mechanical Splice Unit
Metal Sleeve
Confidential
Wedge
Inserted Fiber
FastCAM Details – Wedge Clip
Confidential
FastCAM Connector Installation Steps
Wedge
2. Engage Wedge then insert prepared fiber
3. Disengage Wedge to lock-in fiber
& remove Wedge Clip
4. Assemble connector
1. Prepare fiber – strip, clean, & cleave
Confidential
FastCAM Connector Installation Animation Video
Confidential
FastCAM Connector Performance
Confidential
FastCAM Connector Performance
Confidential
FastCAM Connector Performance
Confidential
FastCAM Connectors- part numbers
FastCAM-SC Connector Part Numbers Fiber Type Housing color Cable size
49991-5SC multimode 50/125 black 250um or 900um49991-MSC multimode 62.5/125 beige 250um or 900um49991-LSC LO multimode Aqua 250um or 900um49991-SSC singlemode blue 250um or 900um
FastCAM-LC Connector Part Numbers Fiber Type Housing color Cable size
49991-5LC multimode 50/125 black 250um or 900um49991-MLC multimode 62.5/125 beige 250um or 900um49991-LLC LO multimode Aqua 250um or 900um49991-SLC singlemode blue 250um or 900um
FastCAM-ST Connector Part Numbers Fiber Type Housing color Cable size
49991-5ST multimode 50/125 black 250um or 900um49991-MST multimode 62.5/125 beige 250um or 900um49991-SST singlemode blue 250um or 900um
Confidential
FastCAM Connector Pricing Guideline
The Competition
Corning Unicammm: $8.50 – $10.00sm: $12.90
Tyco LightCrimp+mm: $8.00 sm: $12.50 - $14.00
Leviton FastCammm: $ 8.50sm: $ 12.95
Confidential
FastCAM Connectors
Summary
Leviton’s new FastCAM connector –
Requires no costly proprietary toolingEliminates any field curing or polishing concernEnables a very FAST & reliable fiber termination
Confidential
Thank You!