Download - File-6-SCT-DLJ-C1158-VOL-IIIA- Price schedule · bharat heavy electricals limited ... associated piping including electrical, ... project open cycle gas turbine power plant at dhuliajan,

BHARAT HEAVY ELECTRICALS LIMITED (A Govt Of India Undertaking)

POWER SECTOR – EASTERN REGION PLOT – DJ 9/1, SECTOR II, SALT LAKE

KOLKATA – 700 091

TENDER NO PSER:SCT:DLJ-C1158:10

VOLUME IIIA PRICE SCHEDULE (ABSOLUTE VALUE), REV-00

JOB PACKAGE-I : CIVIL, STRUCTURAL AND ARCHITECTURAL WORK AND MISCELLANEOUS ENABLING CIVIL WORKS & PACKAGE-II : MATERIAL HANDLING AND ERECTION, TESTING, COMMISSIONING ETC FOR 1XFR5 GTG & AUX, ASSOCIATED PIPING INCLUDING ELECTRICAL, C&I ETC.

CAPACITY 1X20.28 MW PROJECT OPEN CYCLE GAS TURBINE POWER PLANT AT

DHULIAJAN, ASSAM.

1 This preamble forms part of tender document and schedule of items. The tenderer should read thispreamble carefully in rates for various items. Clauses under this preamble shall be read in conjunction withvarious Volumes of tender document as per NIT together with subsequent changes /modifications etcthereto as applicable as on the date of submission of price offer and shall have precedence over anycontrary statement mentioned anywhere in this document.

2 The work shall be carried out as per specifications, description of the items in this schedule and / orengineer’s instructions.

3 Items of work provided in this schedule but not covered in this specification shall be executed strictly as perinstruction of the engineer.

4 Unless specifically mentioned otherwise in the tender document, the tenderer shall quote for the finisheditems and shall provide for the complete cost towards power, fuel, tools, tackles, equipment, constructionalplants, temporary works labour, dismantling of all temporary piping, structures, valves, pumps, tanks &other misc. equipment, strengthening of roads/culverts/ bridges etc including arranging all clearances etcrequired for carrying out different activities & tests, material, levies, taxes (except service tax), transport,layout, repairs, rectification, maintenance till handing over, supervisions, colonies, shops, establishments,overheads, profits and all incidental items not specifically mentioned but reasonably implied and necessaryto complete the work according to the tender document and this schedule.

5 The quantities of the various items mentioned in this schedule of items are approximate, based on verypreliminary information and may vary to any extent or to be deleted altogether. The quoted rates of eachitem will remain firm as long as variation in the total value of work executed under any part of this contractincluding extra items, if any, but excluding any price escalation remains within 30% (Thirty percent) of theawarded value for Civil protion of work(Package-I-Sch-1&Sch-2). But for other packages (Package-II-Sch-3(Part- I&II, Sch-4 & Sch-5), Schthe same shall be limited to 15 % (fifteen percent) of the awarded value inline with GCC/SCC.

6 The rates quoted shall be inclusive of cleaning the site of any vegetation, dressing, and leveling etc.required for commencement of site activities. No separate payment will be made towards the same.

7 The rate shall also be inclusive of carrying out topography survey of site to establish levels and co-ordinatesat suitable intervals from existing greed levels and co-ordinates furnished by the owner, establishbenchmarks, setting out the location and levels of the proposed structures, constructions and makingreferences, pillars and other identification marks etc. No separate payment will be made towards the same.

8 Rates shall be quoted both in figures and in words in clear legible writing. No overwriting is allowed. Allscoring and cancellations should be countersigned and in case of illegibility the interpretation of engineershall be final. All entries shall be in English language. The rates quoted are inclusive of all taxes and dutiesviz Sales tax, excise, octroi etc. THE SUMMATION OF PRICE QUOTED BY BIDDERS FOR PART-A & B SHALLBE CONSIDERED FOR EVALUATION.

9

All works item wise shall be measured upon completion and paid for at the rates quoted and accepted. 10

The tenderer shall be deemed to have studied the specifications and details of work to the done within thetime schedule attached and to have acquainted himself of the conditions prevailing at site.

11 Engineer’s decision shall be final and binding on the contractor regarding clarification of items in theschedule with respect to the other sections/volumes of the contract.

12 Separate Orders shall be placed for Package-I and Package-II. Taxes & Duties shall be as per provisions oftender.

VOLUME-IIIA BOQ CUM RATE/PRICE SCHEDULE, REV-00

CIVIL, STRUCTURAL ARCHITECTURAL AND OTHER MISCELLANEOUS CIVIL ENABLING WORKS FOR 1X20.28MW GAS TURBINE (Fr 5) ( PKG-I) TOGETHER WITH COMPLETE MATERIALS MANAGEMENT OF ALL PACKAGESAND ERECTION, TESTING, COMMISSIONING ETC OF 1x20.28 MW Fre-5 GTG INCLUDING, ELECTRICAL, C&IETC. FOR 1x20.28 MW OPEN CYCLE GAS TURBINE (PKG-II) POWER PLANT AT DHULIAJAN, ASSAM

PREAMBLE

TENDER NO - PSER:SCT:DLJ-C1158:10VOL-IIIA, REV-00

PAGE 1 OF 54 SIGNATURE WITH SEAL OF BIDDER

Sl.

No.

Item Description TOTAL ALL INCLUSIVE PRICE

(IN RS.)

I CIVIL, STRUCTURAL ARCHITECTURAL AND OTHER MISCELLANEOUS CIVIL ENABLING WORKS FOR 1X20.28 MW GAS TURBINE (Fr 5) ( PKG-I) TOGETHER WITH COMPLETE MATERIALS MANAGEMENT OF ALL PACKAGES AND ERECTION, TESTING, COMMISSIONING ETC OF 1x20.28 MW Fre-5 GTG INCLUDING, ELECTRICAL, C&I ETC. FOR 1x20.28 MW OPEN CYCLE GAS TURBINE (PKG-II) POWER PLANT AT DHULIAJAN, ASSAM

VOLUME‐IIIA , REV‐00

BOQ CUM RATE SCHEDULE CIVIL, STRUCTURAL ARCHITECTURAL AND OTHER MISCELLANEOUS CIVIL ENABLING WORKS FOR 1X20.28 MW

GAS TURBINE (Fr 5) ( PKG‐I) TOGETHER WITH COMPLETE MATERIALS MANAGEMENT OF ALL PACKAGES AND

ERECTION, TESTING, COMMISSIONING ETC OF 1x20.28 MW Fre‐5 GTG INCLUDING, ELECTRICAL, C&I ETC. FOR

1x20.28 MW OPEN CYCLE GAS TURBINE (PKG‐II) POWER PLANT AT DHULIAJAN, ASSAM

TENDER NO :‐ PSER:SCT:DLJ‐C1158:10



Sl. No. Item Description TOTAL ALL INCLUSIVE PRICE

(IN RS.)

I Package‐I : Civil, Structural and Architectural work and

Miscellaneous Enabling Civil works (SCH‐1 + SCH‐2)

2 Package‐II : Material Handling and Erection, Testing,

Commissioning etc. of 1XFR5 GTG & Aux, Associated Piping etc,

including Electrical and C&I etc at 1X20.28 MW Open Cycle Gas

Turbine Power Plant at Duliajan, Assam ( SCH‐3 + SCH‐4+ SCH‐5)

VOLUME‐IIIA , REV‐00

BOQ CUM RATE SCHEDULE CIVIL, STRUCTURAL ARCHITECTURAL AND OTHER MISCELLANEOUS CIVIL ENABLING WORKS FOR 1X20.28 MW

GAS TURBINE (Fr 5) ( PKG‐I) TOGETHER WITH COMPLETE MATERIALS MANAGEMENT OF ALL PACKAGES AND

ERECTION, TESTING, COMMISSIONING ETC OF 1x20.28 MW Fre‐5 GTG INCLUDING, ELECTRICAL, C&I ETC. FOR

1x20.28 MW OPEN CYCLE GAS TURBINE (PKG‐II) POWER PLANT AT DHULIAJAN, ASSAM

TENDER NO :‐ PSER:SCT:DLJ‐C1132:10

GRAND TOTAL PRICE



SL. NO DESCRIPTION UNIT TOTAL QTY RATE (IN Rs.) AMOUNT (IN Rs)

1.0 EXCAVATION

1.1a

Earthwork in excavation in all kinds of ordinary and hard soil (including slushy soil) up to a depth of 2.0m belowground level and stacking within a lead of 100 M, with necessary shoring, strutting, ramming, trimming anddressing of sides etc., including bailing/pumping out of surface water/rain water/sub soil water, cutting minorvegetation, if any, complete .

CU. M. 14,300

1.1b Same as Item no-1.1a above but from 2.0 m - 4.0 m depth CU. M. 4,000

1.1c Same as Item no-1.1a above but from 4.0 m - 6.0 m depth CU. M. 2,200

2.0 BACKFILLING

2.1Earthwork in backfilling & compacting in layers not exceeding 250 mm around foundations, trenches , below gradeslabs and all other locations , as per specs, drawings and as directed by the Engineer.

a) With earth obtained from stacks within a lead of 100 M CU. M. 14,000

b)With selected earth (cohesive non-swelling / murram) obtained from borrow pits outside the battery limit within a

lead of 5.0 Km inclusive of necessary royalty charges.CU. M. 1,500

2.2Supplying and filling river sand in layers not exceeding 150mm including compacting by mechanical means,flooding with water etc all complete as per specification and as directed by the Engineer. CUM 500

2.3Removal of surplus earth & debris including transportatin, loading and unloading , dumping, stacking, levelling anddressing etc.complete as per specifications and drawings.

a) lead above 100m to upto 1KM CUM 3,500

b) lead above 1KM to upto 2KM CUM 1,500

c) lead above 2KM to upto 3KM CUM 1,500

Site grading and levelling with filling excavated earth from foundations in layers not exceeding 250 mm within theproject area using mechanical /manual means breaking clods cutting heaps compacting using compaction


CIVIL, STRUCTURAL ARCHITECTURAL AND OTHER MISCELLANEOUS CIVIL ENABLING WORKS FOR 1X20.28 MW GAS TURBINE (Fr 5) ( PKG-I) TOGETHER WITH COMPLETE MATERIALS MANAGEMENT OF ALL PACKAGES ANDERECTION, TESTING, COMMISSIONING ETC OF 1x20.28 MW Fre-5 GTG INCLUDING, ELECTRICAL, C&I ETC. FOR 1x20.28 MW OPEN CYCLE GAS TURBINE (PKG-II) POWER PLANT AT DHULIAJAN, ASSAM

MAIN CIVIL - (PACKAGE-I - SCH-1)

2.4project area using mechanical /manual means breaking clods,cutting heaps, compacting using compactionequipment in nonaccessible areas and road rollers in open areas to obtain 95% proctor density for cohesive soils &85% for non-cohesive soils as per drwgs. and specs.

CUM 5,000

3.0 CONCRETE

3.1

Supplying, laying in position, compacting and curing as per specification plain cement concrete of the following mixwith 20mm down size aggregates below GL and upto 1.0M above GL , including consolidation of subgrade whereverrequired. (Cement will be supplied by BHEL as per SCC free of cost):

a) 1:4:8 CUM 450

b) 1:3:6 CUM 150c) 1:2:4 CUM 80

3.2

Supplying, laying in position, curing as per specifications controlled concrete of the following grades(gradedcoarse aggregates of 40mm down, 20mm down 12mm down shall be used wherever applicable)

a) for all depths below GL and 1.0 m above GL (Cement will be supplied by BHEL as per SCC free of cost):

i) Grade M-20 in foundations, floors,beams, and pavings etc. (using min. cement content of 360 kg/cum) CUM 100

ii) Grade M-25 in foundations, slabs, columns, beams, floors etc. (using min. cement content of 410 kg/cum) CUM 4500

b)for all elevations greater than 1m above G.L. (Cement will be supplied by BHEL as per SCC free of cost):

i) Grade M-20 in foundations, floors,beams, and pavings etc. (using min. cement content of 360 kg/cum)CUM 200

ii) Grade M-25 in foundations, slabs, columns, beams, floors etc. (using min. cement content of 410 kg/cum) CUM 2,400

iii) Grade M-30 in foundations, slabs, columns, beams, floors etc. (using min. cement content of 410 kg/cum)CUM 300

TENDER NO - PSER:SCT:DLJ-C1158:10VOLUME-IIIA, REV-00

PAGE 4 OF 54SIGNATURE WITH SEAL

OF BIDDER





3.3

Providing and placing in position, compating , curing Reinforced concrete for paving of M20 grade (usingOPC/ PPC/PSC )with min. cement content of 360 kg/cum, including laying in approved size panels, leavinggrooves for sealing joints, cost of form work, finishing of top surface as required but excluding cost of reinforcementwhich will be paid under relevant items, etc.all complete for floors and pavement as per drawing and specifications.(Cement will be supplied by BHEL as per SCC free of cost).

CUM 1,000

3.4

Supplying and mixing 'plastocrete-n/super or approved equivalent brand of integral water proofing compoundin cement concrete and for cement mortar Noleek-CP/Sika latex or approved equivalent brand . all complete asper drawings and specifications. (All materials to be supplied by contractor) Kgs 300

3.5 (a)Providing and Fixing in position 12mm thick 'shalitex' or approved equivalent fibre board in expansion joints etc allcomplete as per specifications and drawings. SQ. M. 200

3.5 (b)Providing and Fixing in position 25mm thick 'shalitex' or approved equivalent fibre board in expansion joints etc allcomplete as per specifications and drawings.

SQ. M. 570

3.6Supplying and laying sealing compound with premium grade Silicon sealant (SILPRUF of GE Silicon or approvedequivalent) conforming to IS:1834 as per specification.

a) 20mm wide,25mm deep R.M. 4,500

b) 10mm wide,40mm deep R.M. 1,100

3.7

Fabricating and placing in position precast reinforced concrete trench covers of grade M25 (using ordinaryportland cement)of varying thickness including fixing of reinforcement, shuttering, lifting lugs etc., all completeincluding edge angles as per drawing and specifications. Reinforcement and edge angle embedments will be paidseparately as per SOQ. (Cement will be supplied by BHEL as per SCC free of cost).

CUM 120

Supplying and installing ribbed PVC water stops 6mm thick and 230mm wide in cement concrete including laps3.8

Supplying and installing ribbed PVC water stops 6mm thick and 230mm wide in cement concrete including lapsby fixing / valcanizing joints and folds as applicable and approved by the Engineer. RM 2,710

3.9

Grouting under equipment bases as required,curing and finishing the exposed surfaces including all materials, formwork etc. as per drawings and directions of the Engineer. All materials to be supplied by contractor.

a)

Using non shrink grout like conbextra GP 1 or approved equivalent, including cost of grout mix, form work,finishing, curing etc. , all complete as per drawings and manufacturers' specifications. All materials to be suppliedby contractor.

CUM 15

b)Same as item 3.9 (a) but using non shrink grout like conbextra GP 2. All materials to be supplied by contractor.

CUM 5

c)Same as item 3.9 (a) but using cement conrete of grade 1:1:2. (Cement will be supplied by BHEL as per SCCfree of cost). CUM 5

4.0 FORM WORK

4.1Supplying, installing, dismantling and removing the following classes of formwork as per drawings andspecifications at all levels using steel / plywood shuttering.

a) Straight in plan SQ.M. 15800

b) Curved in plan SQ.M. 400

4.2Providing pockets in concrete of sectional area less than 0.1 sq.m in plan by fixing and removing formwork foranchor bolts , pipe sleeves etc. as per drgs including. all materials ,labour etc. complete as per drawings andspecifications.

a) Up to 300 mm deep Nos. 80

b) 301mm to 600mm deep Nos. 60

c) 601mm to 1000mm deep Nos. 60d) 1001 mm to 1500 mm deep Nos. 40

5.0 REINFORCEMENT

5.1Supplying,bending, binding, transporting, and placing in position following types of reinforcement of all diametersand at all elevations using approved quality binding wires as per specifications and drawings.

a) MS reinforcement conforming to IS:432. Contractor to supply all materials. M.T. 20



OF BIDDER





b) HSD / TMT reinforcement conforming to IS:1786. (Reinforcement will be supplied by BHEL as per SCC free ofcost)

M.T. 700

5.2

Supplying and fixing in position hard drawn welded wire fabric 3mm dia.,50X50mm mesh,2.22Kg/sq.m, as per IS1566 to steel structures as reinforcement, for encasing, at various elevations , all complete as per drawings andspecifications. (All materials to be supplied by contractor)

Sq. m. 500

6.0 STRUCTURAL STEEL

6.1a

Taking delivery of raw steel material supplied by BHEL and transporting to work site, fabricating using approvedquality electrodes of 6013 or low hydrogen 7018 for plate thickness above 20 mm, with pre-heating of plate, &electrodes as required, packing and delivering at the stores or at site of the following categories of steelworknecessary bolts, nuts & washers with a primer coat of red oxide zinc chromate as per IS 2074 of 30 micron DFTafter power tool cleaning to SSPC-SP-3 complete as per drawings and specifications, including cost of electrodes,consummables etc., Steel work consisting of portal frames, laced & plated columns, beams, roof trusses, platforms,purlins, non plated beams, bracings, sag rods with anchor cleats / end plates fabricated with standard rolledsections, plates,flats, angles,beams,channels,pipes etc. (MS PLATES, CHANNEL, ISMB, ANGLE, CHEQUEREDPLATES WILL BE SUPPLIED BY BHEL FREE OF COST AS PER SCC)

MT 645

6.1b

Supply of raw steel material, fabrication and Erection using approved quality electrodes of 6013 or low hydrogen7018 for plate thickness above 20 mm, with pre-heating of plate, & electrodes as required, packing and delivering atthe stores or at site of the following categories of steelwork,all necessary bolts, nuts & washers with a primer coatof red oxide zinc chromate as per IS 2074 of 30 micron DFT after power tool cleaning to SSPC-SP-3 complete asper drawings and specifications, including cost of electrodes, consummables etc., Steel work consisting of portalframes, laced & plated columns, beams, roof trusses, purlins, non plated beams, bracings, sag rods with anchorcleats / end plates fabricated with standard rolled sections, plates,flats, angles,beams,channels,pipes etc.Contractor to supply all materials for this item. Payments terms - a) on receipt of materials at site-60%, b)Fabrication - 26%, c) Erection - 10%, d) Alignment - 4%.

MT 15

6.2

Erection of structural steel as described in item no.6.1a & b, including grouting under bases,with necessaryerection bolts, nuts & washers, welding electrodes, etc all complete as drawings and specifications. MT 660

6.3

Supplying , Fabricating and fixing in positions MS inserts like rails sections, channels, angles, flats, rounds,plates, pipe sleeves,foundation bolts and any other structural shape etc. including necessary templates / stagings,cutting to required lengths, bolting revetting welding etc. as required all complete as per drawings andspecifications.Contractor to supply all materials. Payments terms - a) on receipt of materials at site-60%, b)Fabrication - 26%, c) Fixing -14%

MT 40

6.4

Taking delivery of foundation hardware supplied by BHEL and transporting to site, fixing in position foundationhardware such as anchor bolts, nuts, washers, anchor assembly etc. as per drawing including fixing to proper leveland alignment using contractor's own templates, protecting till handover of the foundation, all complete as perdrawings and specifications.

MT 5

6.5

Supplying and erecting hot dip galvanised GI floor gratings , staircase steps,ladder etc.with minimum coating of710 gms per sq.m. as per IS 2629 and dwgs including cost of materials, consummables, labour, all fasteners,site welding and painting with cold galvanising paint etc complete as per drawing & specifications. Contractor tosupply all materials. Payment terms - a) On receipt of materials at site - 65%; b) On completion of erection & fixing -35%.

MT 25

6.6

Supplying, fabricating, fixing in position 40 mm dia MS pipe handrails ,galvanized as per IS 2629,with minimumcoating of 710 gms per sq.m., at various elevation as per drawings & specifications.including cost of materials,consummables, labour etc. all complete. specifications. Contractor to supply all materials. Payment terms - a) Onreceipt of materials at site - 65%; b) On completion of erection & fixing - 35%.

R.M. 400

6.7

Supplying, fabricating, fixing in position by welding 18 gauge MS sheets to steel columns for encasing at variouselevations , all complete as per drawings and specifications. (All materials to be supplied by contractor) MT 5



OF BIDDER





6.8

Supplying, installing and fixing in position roofing of double skin insulated sandwiched galvalume sheetcladding (profiled). Metal shall be permanently pre coated with fluro polymerover zinc aluminium high tensile steelprofiled sheet of 0.55 mm TCT think for outer sheet. for inner sheet permanently colour coated (RMP coating)overgalvanised steel sheets of minimum 0.6 mm thick and class 180 gsm/sqm. the insulation shall be bonded mineralwool of minimum density 32 kg/cu.m with minimum coefficient of thermal conductivity 0.49 mw/cm deg C(at 50 degC) confirming to IS 8183, all complete as per drgs & spec.(All materials to be supplied by contractor) Payment terms- a) On receipt of materials at site - 70%; b) On completion of erection & fixing - 30%.

SQ.M. 2,500

6.9

Supplying, installing and fixing in position side sheeting of insulated sandwiched galvalume sheet cladding(profiled). Metal shall be permanently pre coated with fluro polymerover zinc aluminium high tensile steel profiledsheet of 0.5 mm TCT think for outer sheet. for inner sheet permanently colour coated (RMP coating)over galvanisedsteel sheets of minimum 0.6 mm thick and class 180 gsm/sqm. the insulation shall be bonded mineral wool ofminimum density 32 kg/cu.m with minimum coefficient of thermal conductivity 0.49 mw/cm deg C(at 50 deg C)confirming to IS 8183, all complete as per drgs & spec (All materials to be supplied by contractor). Payment terms -a) On receipt of materials at site - 70%; b) On completion of erection & fixing - 30%.

SQ.M. 3,000

6.10

Supplying, installing and fixing in position side sheeting/ / roofing of galvalume sheet cladding (profiled). Metalshall be permanently pre coated with fluro polymer over zinc aluminium high tensile steel profiled sheet of 0.55 mmTCT thick for outer sheet, (RMP coating) all complete as per drgs & spec (All materials to be supplied bycontractor). Payment terms - a) On receipt of materials at site - 70%; b) On completion of erection & fixing - 30%.

SQ.M. 1,000

7.0 MASONRY & ALLIED WORKS (Cement will be supplied by BHEL as per SCC free of cost)

7.1Supplying and laying of coarsed rubble stone masonry in cement mortar 1:6 in foundations and basement as perspecifications

CUM 100

S l i d l i i iti i i 75 k / 2 IS 1077 b i k k i f d ti d t li th i7.2

Supplying and laying in position minimum 75 kg/cm2 as per IS:1077 brick work in foundation and upto plinth incement sand mortar (1:6) including mixing mortar, laying bricks,raking of joints, curing etc., all complete as perdrawings as spefications.

CUM 200

7.3 Similar to 7.2 in super-structure at all elevations CUM 1,000

7.4Supplying and laying position minimum 75 kg/cm2 as per IS:1077 brickwork in half brick walls at variouselevations in 1:4 cement sand mortar with HB netting at every third layer including mixing mortars, raking joints,curing etc all complete as per drawings and specifications.

CUM 50

7.5

Supplying and laying damp proof course 50mm thick with plain concrete (1:11/2 : 3) nominal mix by volume with

10mm down size aggregates and minimum 2% admixture of water proofing compound. The percentage of admixtureshall be as per manufacturer's specification but not less than 2% by weight of cement . the top surface shall bedouble chequered and cured by ponding for seven days

SQ. M 50

7.6Providing 12mm thick cement-sand (1:6) plastering to interior surfaces of the brick walls at various elevationsincluding mixing, laying , finishing,curing, rounding corners, cutting grooves, wherever required, etc. with allmaterials complete as per drawings and specifications.

SQ. M 4,800

7.7

Providing 18 mm thick external cement-sand plastering in two layers. bottom layer of 12 mm with 1:5 cementsand mortar with coarse sand and top layer of 6 mm thick with 1:4 cement sand mortar with fine sandincluding mixing, laying , finishing,curing, rounding corners, cutting grooves, wherever required, etc. with allmaterials complete as per drawings and specifications.

SQ. M 4,700

7.8Providing and placing in position 20 mm thk lath plaster in CM 1:4 for fins , drops etc. including providing andfixing 24 G metal lath ( wire mesh) but excluding cost of reinforcement. SQ.M 300

7.9Providing minimum 6 mm thick (1:4) cement sand plaster over concrete surfaces of columns, beams, slabs etc.similar to item 7.6 above (Using ordinary portland cement)

SQ.M 2,400

7.10Drip course at various elevations to parapet, chajja, windows, door heads etc. with all material complete as perdrawings, spcns. and directions of the engineer. R.M. 800

7.11Providing 12mm wide x 12 mm deep rectangular grooves in plaster for architectural purposes, including allmaterials, etc. all complete. as per drawings .

R.M. 500

7.12Supplying and fixing 16 BG meta lath (wire mesh) at junctions of brick work and concrete work before plastering atvarious elevations locations as shown in drawings and as directed by the Engineer SQ.M. 200

7.13Providing average 50mm thick 1:2:4 cement screed with 6mm down stone chips, to required slope with allmaterials, hacking the old concrete, finishing, curing etc., as per drgs & specifications. CUM 100



OF BIDDER





8.0FLOORING (Under bed concrete will be paid seperately under relevant item). (Cement will be supplied byBHEL as per SCC free of cost).

8.1

Supplying, laying of 20 mm thick unglazed ceramic vitreous acid resistant tiles of approved make conforming IS-4457 over potassium silicate based mortar as per IS-4832 (Part-I) and Alkali resistant paint IS-158 and joint filleras per IS-4832 (Part-II) dado upto 2.2m height above floor with all materials complete as per drawings andspecifications.

SQ.M. 500

8.2

Supplying and laying 20mm thick precast terrazzo tiled flooring of approved quality and colour at variouselevations,staircase steps and landing, including preparations of base laying underbed & tiles with white cementbased topping, curing rubbing , polishing etc. with all materials complete as per drgs., finish schedule andspecifications.

SQ.M. 350

8.3

Supplying laying and fixing 40mm thick Kota stone flooring/steps in staircase,skirting and dado in variouselevations comprising min.400x275x20mm thick for flooring ,400x275x20mm thick stone slabs for dado and 125mmhigh 20mm thick stone slabs for skirting including preparation of base laying under bed, finishing polishing etc., asper drawings and specifications.

SQ.M. 200

8.4

Supplying and fixing Vitrified Ceramic tiles of approved make of sizes 600x600x9.5 to10mm for flooring and fordado up to 2.5 m elevations including pereparation of base laying underbed, finishing and rounding corners andjunctions, curing etc. complete as per drawings and specifications.

SQ.M. 400

8.5

Supplying and fixing Ceramic tiles of approved make of sizes 300X300X8mm for flooring and 300X200X6 for dado up to 2.5 m elevations including preparations of base laying underbed, finishing and rounding corners and junctions,curing etc. complete as per drawings and specifications.

SQ.M. 200

8.6Supply and laying of 3mm thick PVC skirting 150 mm high including preparation, fixing tile finishing etc., allcomplete as per approved manifacturer's specifications. SQ.M. 100

8 7

Providing 50mm thick heavy duty cement Concrete flooring comprising 35mm cement concrete base of Concretegrade M25, laying underbed in panels bound by 4X40mm aluminium strips followed by 15mm thick wearing toplayer of cement metallic hardner and stone aggregate finishing curing etc all complete with dust protective SQ M 2 2008.7 layer of cement, metallic hardner and stone aggregate, finishing, curing etc. all complete with dust protectivecoating, as per Specifications. Cost includes baseconcrete and underbed concrete.

SQ.M. 2,200

8.8Supplying and laying pigmented epoxy coating including min 3mm thick screed and finishing coat in two coats @125gm./ sq.m per coat all as per specifications. SQ.M. 200

8.9Providing 3 mm thick neat cement finish over concrete / plaster surfaces for flooring paving & drain walls etc.

SQ.M. 600

8.10Laying 20 mm thick grey cement skirting(1:3) including preparation of base , laying underbed, finishing with neatcement, rounding corners and junctions, cutting grooves, if required curing etc., complete as per drawings andspecifications.

SQ.M. 200

8.11

Providing and laying PVC roll approved shade, texture of 2mm thickness in floor, skirting fixed over Heavy dutyflooring wherever specified by means of neoprene based rubber adhesive (as per manufacture specification)including cleaning surfaces with approved detergent to remove stains etc. all complete as per specifications.

SQ.M. 100

8.12

Supplying and laying marble stone flooring min. 40mm thick over all comprising of min. 20 mm thick best qualitymarble stone slabs of grade-I quality, including preparation of base course laying underbed , finishing, curing,polishing as per spec etc. all complete as per specifications.

SQ.M. 200

8.13

Supplying and laying of chequered tile flooring of min. 40mm thick over all comprising of min. 20 mm thick bestquality chequred tiles of grade-I quality for walkway, gardeen & other areas including preparation of base courselaying underbed , finishing, curing, polishing as per spec etc. all complete as per specifications.

SQ.M. 200

9.0 FALSE FLOORINGSupplying, erecting, fitting & laying false flooring with cold formed steel channel sections and cast grooved headsupports by adjusting threaded studs of 30 mm dia 600 mm long and tiles of 35 mm thick approved quality phenolbonded particle board with bottom side 0.05 mm thick Aluminium foil & top side 3mm thick best quality approvedpressure laminate / antistatic PVC tile, conforming to IS:3462 for topping and PVC lipping for the edges including all necessary nuts, bolts, washers etc, all complete as per drawings and specifications. (All materials to be supplied bycontractor) Payment terms - a) On receipt of false flooring materials at site - 50%; b) On completion of erection &fixing - 50%.

SQ. M. 700

10.0 FALSE CEILING



OF BIDDER





10.1

Providing and fixing aluminum linear false ceiling system "LUXALON" by Hunter Duglas comprising of 150 mmwide 15 mm deep roll formed panels consisting of length upto 6 m, coil coated on both sides, rolled formed fromstove enamelled corrosion resistant 0.5mm thick aluminium alloy AA-3105 and perforated panels for return air asper air conditioning requirements including 32mm wide & 39mm deep panel carriers made of roll formed coatedsteel with 0.95mm thick aluminium alloy with cutouts to hold the panels in the module of 90/100mm , includingsuspending carries from roof by 4mm dia galvanised steel hanger with steel by "j" hooks & nylone inserts, heightadjustment clips made of spring steel at .max 1200mm c/c including providing profiles gap closure strips etc., slitopenings for fixing supply / return air grill, lighting fixtres, AC diffusers etc. all complete as per drawings andspecifications. (All materials to be supplied by contractor) Payment terms - a) On receipt of aluminium false ceilingat site - 50%; b) On completion of erection & fixing - 50%.

SQ. M. 800

10.2

Providing and fixing under deck insulation as per HVAC (at soffit of the slab) consisting of 50mm thick bonded

mineral fibre wool board conforming to IS:8183 ,Group-1 (having a density of 40 kg/m3 ) faced with alluminium foil ,as non-combustible as per BS:476, part - 4 including fixing the insulation to soffit / sides of beams by means ofapproved quality adhesive and providing & fixing 3 mm thick 190 x 25 mm L-shaped M.S. slotted cleats to the soffitof the slab with dash fasteners @ 600 mm c / c, both ways securing the insulation with chicken wire net ting with24GX 25mm stretched tightly over the insulation and held by 14 SWG G.I. wire tied diagonally through the slots ofcleats etc., all complete as per drgs. and spec.

SQ.M. 1,000

10.3

Supplying and fixing gypsum board false ceiling system comprising of 12mm thick gypsum board tiles of approvedqualities and fixing to under side of grid system with 12.5mm dia dry wall screw @ 230mm c/c , and grid systemmade of 0.9mm thk. 45mm size and two flanges of 15mm each GI main runner suspended from ceiling @ 1.2m bymeans of bolting to GI cleat fixed the ceiling with dash fastners, 0.5 thk. knurled web of 51.1mm and two flanges of26mm GI channel shaped cross runners and 0.5mm thick web size of 27mm one flange 20mm other 30mm wallrunnersfixed to peripheral walls by rawl plugs/ dash fasteners @ 450mm c/c including finishing, levelling andaligning etc. all complete as per specifications. (All materials to be supplied by contractor) Payment terms - a) On

SQ.M. 400

aligning etc. all complete as per specifications. (All materials to be supplied by contractor) Payment terms a) Onreceipt of gypsum board false ceiling at site - 50%; b) On completion of erection & fixing - 50%.

10.4

Providing Phenolic Foam under deck insulation on the ceiling system (at soffit of the slab) consisting of 25 mmand approx. 1000 mm X 500 mm size conforming to IS:13204 (having a density of 32 kg/m3 and K value of 0.016KCal/hr M C as per BS 4370, Part-2) faced with alluminium foil , as non-combustible as per BS:476, part - 5including fixing the insulation to soffit / sides of beams by means of approved quality adhesive and providing & fixing3 mm thick 190 x 25 mm L-shaped M.S. slotted cleats to the soffit of the slab with dash fasteners @ 600 mm c / c,both ways securing the insulation with chicken wire netting stretched tightly over the insulation and held by 14 SWGG.I. wire tied diagonally through the slots of cleats etc., all complete as per drgs. and EIL spec No-6743-31-16-48-SP-0054 .

SQ.M. 800

11.0PAINTING (PAINTS OF REPUTED MANUFACTURER LIKE ICI/BURGER/ASIAN PAINTS OR EQUIVALENT)

11.1

Providing minimum two coats of water proof cement paint approved brand and shade made from best quality whitecement and lime resistant colours with accelerators, water proofing agents and fungicides. Incuding preparation ofsufaces, scaffolding, cost of paint etc., all complete as per drawings and specifications. the paint shall confirm toIS5410

SQ.M. 1,000

11.2

Providing complete proctective coating system to structural steel works with two coats of synthetic enamelpaints(20 micron DFT each, total 40 micron) over a coat of red oxide zinc phosphate primer(30 micron DFTconforming to IS-12744(primer will be paid under item no 6.1) and paint conforming to IS 2932 and IS 2933,consumables and scaffoldings complete as per specifications and drawings.

MT 660

11.3

Providing & applying to interior surfaces two or three coats of Oil Bound distemper of approved shade & makeconfirming to IS : 428 to obtain a even finish and uniform color over a coat of primer as per manufacturerecommendation including cost of paint, surface preparation, scaffolding etc, all complete as per spec. and drawing. SQ.M. 3,400

11.4

Providing and applying two coats of acrylic plastic emulsion paint(water based with rutile titanium dioxide andother selected pigments and fungicide) confirming to IS : 5411 part-1 , including cost of paint, , scaffolding etc. allcomplete as per specification, all complete as per specification and to the satisfaction of engineer / architectincharge. the paint film shall allow the moisture in wall to escape without peeling and blistering

SQ.M. 850

11.5Providing three or more coats of white wash to give a smooth and even shade including cleaning & preperation ofsurfaces scaffolding etc., complete SQ.M. 1,000



OF BIDDER





11.6

Providing minimum two coats of acid/alkali resistant chlorinated rubber based paint over a coat of linsol HB zincphosphate primer, as per manufactures instructions, to plastered surfaces. incuding preparation of sufaces,scaffolding etc., all complete as per drawings and specifications

SQ.M. 300

11.7

Providing two coats of polyurethane painting as per IS:162 over french polishing as per IS:348 over wood work atvarious elevations , including all materials, surface preparation, finishing, polishing etc. all complete.French polishshould not be used on bare wood. it shall be used as finsihing on wood after the wood is pretreated with liquid woodfiller confirming to IS:345 is applied and rubbed out

SQ.M 300

11.8Providing red colour paint synthetic enamel paint (post office red) to inidcate emergency areas and to paintemergency signs including paint cost and preparation of surface scafolding etc, all complete as per spec. SQ.M 50

11.9Providing Fire proof putty in cable penetration cutouts in walls of cable spreader rooms as approved by engineer-in-charge, complete as per specifications SQ.M 100

11.10Providing two coats of Synthetic Enamel paint for primered surface including cost of paint, with all materials,consummables etc., complete as per specifications. SQ.M 100

11.11

Providing and applying two coats of Plaster of Paris punning, including cost of POP , surface preparationscaffolding etc. all complete as per specification, scraping / removing of old paints, if any, making the surface goodwith plaster of paris in case of old surface, all complete as per specification and to the satisfaction of engineer /architect incharge.

SQ.M 850

11.12

Providing 2 or 3 coats of Elastomeric high stretch Exterior Emulsion paint of "Asian Paints" or approved equivalent of approved brand & shade, over a coat of exterior sealer, to give an even shade as per manufacturers'instruction over concrete surfaces or newly plastered surfaces including cost of paint, preparation of surfaces,scaffolding, curing etc., all complate as per drawings and OIL specification.

SQ.M 3,700

12.0Water proofing (Contractor has to furnish a guarantee for material and workmanship for a minimum periodof 10 years).of 10 years).

12.1

Preparation of grading underbed with 1:2:4 mix using 12mm down stone chips and coarse sand at variouselevations including mixing, laying, curing etc. in varying thickness with all materials complete as per drawings andspecifications. (Cement will be supplied by BHEL as per SCC free of cost).

CUM 100

12.2

Preparation of average 25 mm thick grading underbed with 1:3 cement and coarse sand at various elevationsincluding mixing laying, curing etc. with all materials complete as per drawings & specifications. (Cement will besupplied by BHEL as per SCC free of cost).

SQ.M. 400

12.3

Supplying and laying 8 courses (3 layers of bitumen felt + 4 layers of bitumen)of water proofing treatment with bitumen fibre felts conforming to IS:1364 bitumen felt confirming to IS:1322& bitumen primer to IS:3384 as permanufacturers' specifications including surface preparation as per specification & bonding material shall consist ofblown type bitumen confirming to IS:702 or residual bitumen to IS:73 of mixture of two to suit local condition andfinished with pea gravel complete as per drawings & specification.

SQ.M. 800

12.4Same as above but for flashing at junction of slab and parapet wall including preparation of surfaces, cutinggrooves, caulking the end of flashing etc. complete. SQ.M. 200

12.5

Providing 50mm thick foam concrete insulation on roof before providing water proofing treatment with allmaterials and labour, complete as per specifications. (Cement will be supplied by BHEL as per SCC free of cost). SQ.M 800

12.6

Providing 18 mm thick cement sand(1:6) plaster on foam concrete including laying, finishing, curing, roundingcorners junctions, with all materials, labour etc complete as per specifications. (Cement will be supplied by BHELas per SCC free of cost).

SQ.M 800

12.7

Providing and making 150x150mm size fillets in cement concrete 1:2:4 at junctions of roof slab and parapet wallincluding finishing, curing, cutting grooves, rounding corners etc. all complete as per specifications. (Cement will besupplied by BHEL as per SCC free of cost).

R.M. 500

13.0 DOORS, WINDOWS & VENTILATORS

13.1

Providing and fixing steel windows and ventilators of approved make conforming to IS: 1361 and IS 1038 (Latesteditions) including glazing clips and special metal sash putty with handels, peg stays,stoppers,hinges,handles allcomplete as per drawing K5212-DWG-A-0001to 0003 and specifications. Payment terms - a) On receipt of materialsat site - 65%; b) On completion of erection & fixing - 35%.



OF BIDDER





a) fixed type SQ.M 150

b) openable type SQ.M 200

13.2

Providing and fixing of aluminium glazed windows and ventilators of INDAL 40 series including frames andshutters , transomes, mullions, fittings and fixtures, aluminium beading, but excluding glazing having at least 15micron thick anodizing coating and alumnium alloy confirming to IS 737 of corrosion resistance grade as per drgsno K5212-DWG-A-0001to 0003 and spec.(Glazing will be paid under item 13.11) including a coat of red oxide zincchromate primer(30 micron DFT) conforming to IS-12744. Payment terms - a) On receipt of materials at site - 65%;b) On completion of erection & fixing - 35%.

a) fixed type SQ.M 150

b) openable type SQ.M 250

c) sliding type SQ.M 100d) fixed type with hermetically sealed double glazing SQ.M 150

13.3

Supplying and erecting including assembling fitting and fixing best quality 45mm thk. hollow steel doors doubleplated with 18 gauge MS sheets, pressed steel frames at various elevations including frames, shutters, fittings andfixtures, CP mortice lock cum handle mastic caulking, grouting the frames, including one coat of red lead or zincchromate primer paint from approved manufacturer.Payment terms - a) On receipt of materials at site - 65%; b) Oncompletion of erection & fixing - 35%.

a) Single shutter SQ.M. 60b) Double shutter SQ.M. 100

13.4Same as item 13.3 but with 200mm X 300mm vision panels with 6 mm thk. Plate glass etc. complete as perspecifications.

a) Single shutter SQ.M. 20b) Double shutter SQ.M. 40

Supplying erecting assembling best quality PVC panelled doors of Sintex make or approved equivalent for toilets

13.5

Supplying,erecting, assembling best quality PVC panelled doors of Sintex make or approved equivalent for toiletsincluding all fittings and fixtures etc. all complete as per drawings and specifications. SQ.M. 40

13.6

Supplying & erecting including assembling,fitting & fixing steel louvers at various elevations including frames,shutters, fitting and fixtures,mastic caulking,grouting the frame,rawl bolt for fixing etc. as required with all materialsetc. complete as per drawing no K5212-DWG-A-0001to 0003 and specifications including a coat of red oxide zincchromate primer(30 micron DFT) conforming to IS-12744. Payment terms - a) On receipt of materials at site - 65%;b) On completion of erection & fixing - 35%.

SQ.M. 60

13.7

Providing and fixing in position composite, insulated type fire proof doors of approved make having 2Hrs firerating conforming to IS :3614 Part I with all necessary fittings and fixtures incuding self closing hinges, lockingarrangement and painting with two coats of fire proof paint over approved primer etc. complete(contractor to obtainand furnish T.A.C. approval for supplies made) Payment terms - a) On receipt of materials at site - 65%; b) Oncompletion of erection & fixing - 35%.

a) Single leaf SQ.M. 40b) Double leaf SQ.M. 60

13.8

Providing and fixing best quality teak wood panelled doors with all fittings and fixtures,approved quality heavy dutyhinges, best quality anodised aluminium tower bolts , aldrops, door stops etc. all complete as per drawing andspecifications.

SQ.M. 40

13.9

Providing and fixing 40 mm thk solid core flush doors with all fittings and fixtures,approved quality heavy dutyhinges, best quality anodised aluminium tower bolts , aldrops, door stops etc. all complete as per drawing andspecifications.

SQ.M. 30

13.10Providing and fixing approved quality hydraulic door closer corforming to IS :3564 as directed by the Enginer.

Nos 10

13.11Providing and fixing 2mm thk. approved quality silicon strip around doors and windows for making them air tight

including cost of rubber strip adhesive,clips etc. all complete as per specifications and drawings. R.M. 100

13.12Supplying fitting and fixing the following glazing specials at various elevations including supplying rubber beading,cost of all materials etc. complete as per specifications to steel/alluminium windows, doors & partitions.

a) 4mm thick sheet glass SQ.M 300



OF BIDDER





b) 6.0 mm thick bronze tinted toughened glass SQ.M. 400

c)6.0 mm thick clear wired glas shall be thick rolled glass with centrally embedded 0.56mm wire mesh of Georgiantype. This shall be of clear glass and shall conform to IS : 5437.

SQ.M. 400

d) 6.0 mm thick clear toughened glass SQ.M. 400

e)Hermetically sealed double glazed with 6.0 mm thick clear toughened float glass with 12 mm gap in-between

SQ.M. 300

13.13

Supplying, fitting and fixing 12 mm thick twin laminated Gypsum board of "India Gypsum" make at variouselevations to aluminium windows, doors & partitions, including supplying rubber gaskets, cost of all materials etc.complete as per drawings and specifications.

SQ.M. 500

13.14

Supplying and erecting including assembling fitting and fixing Aluminium partition frames with matching doorsetc., as per drawing no. K5212-DWG-A-0001to 0003 and specs. with frames, shutters, double acting heavy dutyfloor springs, fittings, and fixtures, mortice lock, alluminium beading but excluding glazing etc. complete (Glazing willbe paid under item 13.11)

SQ.M 450

13.15Supplying,fitting and fixing anodised aluminium framed doors only as per drg.no.K5212-DWG-A-0001to 0003andspecs. Same as item no 13.13 but to be fixed masonry openings. SQ.M. 40

13.16Providing and fixing anodised aluminium louvered ventilators all as per drawing no.K5212-DWG-A-0001to0003including glazing with 6 thk. Clear wired glass. SQ.M. 20

14.0 ROLLING SHUTTERS :

14.1

Supplying, erecting, assembling, fitting and fixing rolling steel shutters of 18 gauge steel sheets with MS rolledchannel frame as per IS:6248 and accessories from approved manufacturers including all fixtures, lockingarrangements, electrical wiring for motor drive etc. , including over a coat of red oxide zinc chromate primer(30micron DFT) conforming to IS-12744 of approved brand and shade all complete as per specifications and drawings.( All the rolling shutters irrespective of their size should have mechanical as well as electrical openingarrangements.) Payment terms - a) On receipt of materials at site - 65%; b) On completion of erection & fixing -35%35%.

a) Rolling shutteres with manual opening arrrangements (self coiling pull push type) SQ.M 50b) Rolling shutteres with mechanical gear operated type (with bevel gear box & crank handle) SQ.M 70

c) Rolling shutteres with mechanical gear operated as well as electrical motorised opening arrrangements SQ.M 80

d) Rolling shutteres cum grill with mechanical gear operated opening arrrangements SQ.M 100

15.0 SANITATION / PLUMBING

15.1Supplying and erecting HDPE cylinderical and vertical water tank with closed top of SINTEX make or approvedequivalent of following capacity.a) 1000 LTR Nos 2b) 1500 LTR Nos 2c) 2000 LTR Nos 2

15.2

Supplying, fitting and fixing Heavy cast iron " Roof Drain" pipes at various elevations incuding shoe bendsjunctions, sockets,adapters, brackets, hangers, supports etc jointing, caulking prime coat of painting withanticorrosive paint including all materials etc complete as per drawings and specifications.

a) 100 mm dia R.M. 70b) 150 mm dia. R.M. 300

15.3

Similar to item no:-15.2 above supplying fitting and fixing of best quality UPVC drain pipes / rigid PVC pipes of 2.5

kgf/cm2 of approved make at vatious elevtions including shoe bends junctions sockets, adapters, brackets, hangersupports etc., jointing with appropriate adhesives, including all materials complete as per drawings andspecifications.a) 100 mm dia pipes R.M. 40b) 150 mm dia pipes R.M. 150

15.4

Supplying, fitting and fixing Roof drain heads with high domed gratings at various elevations, including connectingto roof drain pipes, caulking with lead supports / fixing with adhesive for PVC pipes, hangers etc, prime coat ofpainting with anti - corosive paint with all materials as per drawings and specifications.

a) Heavy duty C.I. Headsi) 100 mm pipe Nos. 10ii) 150 mm pipe Nos. 40

b) PVC roof drain heads i) 100 mm pipe Nos. 10ii) 150 mm pipe Nos. 30



OF BIDDER





15.5

Supplying, fitting fixing the following best quality sanitary fixtures of " Hindustan Sanitary ware / Jaguar /Parryware " or approved equivalent make at various elevations including all necessary accessories, cutting andmaking good of concrete / brickwork for concealing all connecting pipes and bends with all materials etc allcomplete as per specifications and drawings.

a)

European type water closet conforming to IS:2556 with glazed vitreous china basin with plastic seats & coverand low level PVC cistern of 15 litre discharge capacity including valveless fittings, flush bends, supplyconnections, syphon , integral `S' or `P' trap etc. all complete.colour as desired by enginner NOS 4

b)

Indian pattern water closet(Orissa pan size 580x440 mm conforming to IS:2556) with glazed vitreous china panwith integral 'footrest; 15 litre capacity low level PVC flushing cistern including valveless fittings, with allnecessary fixtures, integral with 'S' or 'P' trap etc. all complete as per drgs. and specifications . Nos. 6

c)

610 x 410 x 380 mm flat back urinals with a pair of 250 X 125 mm white ceramic foot rest with concealed hangersand brackets, CP brass spreader for concealed piping work, CP brass waste fittings, 30 mm dia heavy duty bottletrap etc all complete as per drgs and specifications.

Nos. 10

d)Automatic high level PVC cistern with mosquito proof lid, interior painted with 2 coats of anti corrosive paintcomplete with loose key CP brass bibcock

i) Cistern capacity 5 ltrs Nos. 5ii) Cistern capacity 10 ltrs Nos. 10iii) Cistern capacity 15 ltrs Nos. 10iv) White poreclain division plate of size 840 X 300 mm with CP brass screws Nos. 10

e)

550 x 440 mm wall hung glazed vitreous china flat back wash basin with provision for tap holes in three locationswith supporting brackets,C.P brass 30mm dia waste fittings,heavy duty CP bottle trap,one no. 15mm dia long noseC.P brass pillar cock,one nosupply connection with 300.mm long,15 mm dia P.V.Cpipe with brass nuts at both endsand C P brass stop cock etc complete as per drgs and specifications

Nos. 6and C.P brass stop cock etc,complete as per drgs and specifications .

f) 150 x 150 mm recessed white glazed porcelain soap tray. Nos. 6

g)Chromium plated shower set with 100/150 mm dia brass shower rose with rim arm,wall flange,hot/ cold watermixing valves including handle and concealed supply pipe including 600mm long C.P grab bar,bibcock etc, as perspecifications all complete.

Nos. 6

h)600 x 450 x 6 mm thk bevelled edge mirror of superier glass with necessary fixtures as per specifications.

Nos. 6

i) 35 litre capacity hot water geyser of approved make. Nos. 2

j) 610mmX127mmX6mm thick clear glass shelves with chromium plated brackets, guard rails etc, all complete

Nos. 12

k) 600 mm long, 20 mm dia and 1.25 mm thick chromium plated brass towel rail with brackets fittings, etc, complete.

Nos. 6

l)SS / Chromium plated standard liquid soap dispenser of approved make with all fittings etc, complete.

Nos. 6

m) 12 mm dia CP brass ablution tap with all fittings complete. Nos. 20

n)Glazed stoneware Sink with wall hung by painted cast iron brackets and complete with one brass faucet with nylonwashers, waste chain, waste washers, lead waste pipes with traps,perforated waste with necessary fittings. Allfittings including faucets shall be chromium plated

Nos. 1

o)Toilet roll holder shall be made of glazed vitreous china / SS with suitable cover cum cutter. Wall mounting screwsshall be chromium plated.

Nos. 4

15.6Supplying, fitting and fixing 100 mm dia inlet and 80/100 mm dia outlet SS floor drain with trap and withscrewed or hinged CP brass gratings.

Nos. 15

15.7Providing 300 x 300 x 675 mm chamber in 1:4 brickwork 115 mm thick with plain concrete 1:2:4 foundation cementmorter including supplying and fixing 100 mm. dia square mouth gully trap, gratings, CI frame and cover, allcomplete as per specifications.

Nos. 8

15.8

Supplying, laying, fitting, fixing and jointing concealed PVC pipes for water lines at various elevations &underground with all fittings bends, teas, reducers etc. including excavation, backfilling, supports, caulking, chases,grooves, hangers, supports, straps etc. painting as specified all complete as per specification and drawings.

a) 12 mm dia R.M. 150



OF BIDDER





b) 19mm dia R.M. 70

c) 25 mm dia R.M. 60d) 32 mm dia R.M. 40

15.9

Supplying, laying, fitting, fixing and jointing extra heavy cast iron soil and drain pipes underground with all fittingsbends, teas, reducers etc. including excavation, backfilling, supports, caulking, chases, grooves, hangers, supports,straps etc. painting as specified all complete as per specification and drawings.

a) 100 mm R.M. 50b) 150 mm R.M. 60

15.10 Same as 15.9 but over ground, including vent pipes and cowls.a) 100mm R.M. 50b) 150 mm R.M. 60

15.11

Supplying, laying, fitting, fixing and jointing UPVC soil and drain pipes underground with all fittings bends, tees,reducers etc. including excavation, backfilling, supports, caulking, chases, grooves, hangers, supports, straps etc.all complete as per specification and drawings.

a) 100 mm R.M. 50b) 150 mm R.M. 60

15.12

Providing and installing RCC Hume pipes of class NP-2 of following diameters with collars,at all depths includingbedding, jointing etc. all complete as per drawing and EIL specifications . (excavation and backfilling to bemeasured seperatly under relevant items)

a) 150 mm R.M. 200b) 200 mm R.M. 200c) 250 mm R.M. 250

d) 300 mm R.M. 200

e) 450 mm R.M. 150

15.13Providing and installing RCC Hume pipes of class NP-3 of following diameters with collars,at all depths includingbedding, following diameters. (excavation and backfilling to be measured seperatly under relevant items)

a) 450 mm R.M. 30

b) 500 mm R.M. 30

c) 600 mm R.M. 30

15.14Supplying, laying and installing SWG pipes at all depths including jointing and excavation up to 1 m depth andbackfilling, disposing the excess earth, all complete as per specs and directions of the Engr.

a) 150 mm dia. R.M. 150b) 200 mm dia. R.M. 200

c) 250 mm dia. R.M. 250

15.15Supplying fitting and fixing CI heavy duty man hole cover of 50 cm dia of approved brand as per specification

Nos. 6

15.16

Supplying, fitting fixing of best quality Automatic Urinal flush Control System(electronic sensor type) ofapproved make at various elevations including all necessary accessories, cutting and making good of concrete /brickwork for concealing all connecting pipes and bends with all materials etc all complete as per specifications anddrawings.

Nos. 10

16 ROADS/PAVING

16.1Consolidating subbase before providing WBM with road roller including water if required to obtain 95% proctordensity including making good undulation etc.all complete as per drawing and specifications . SQ.M. 9,900

16.2

Supplying,laying and rolling Stone soling of consolidated thickness 250mm in 2layers including spreading bindingmaterial(sand / morrum) watering and rolling with road roller etc. all complete as per drawings and specifications . SQ.M. 9,900



OF BIDDER





16.3

Supplying, laying , spreading and compacting stone aggregate of specified sizes to WBM 150 mm in 2 layers (compacted thickness) specifications (as per MORTH or as directed by the Engineer) including spreading in uniform thickness, hand picking , rolling with 3 wheeled road / vibratory roller 8-10 tonne in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate watering and compacting to the required density."

SQ.M. 4,900

16.4

Providing and laying 75 mm compacted thickness of premixed bituminous carpet (hot process) finish over WBMsurface including provision of a tack coat and a seal coat,using bitumen conforming to IS : 73 , preparation ofsurfaces, rolling etc.complete as per specs.

SQ.M. 4,900

16.5

Supplying,laying and setting precast concrete edging blocks 300 x 150 mm ( at base) and a min.length of 450 mm(except at curves) in M 20 grade concrete including cutting of trench and packing exterior face of blocks with stonechips and murrum including pointing the joints with CM 1:4 etc. complete. (Cement will be supplied by BHEL as perSCC free of cost).

R.M. 1,400

16.6Supplying, Spreading & filling crushed aggregate 150 mm thick and consolidation and preparation of sub baseincluding watering and rolling & compaction with power roller 10-12 T capacity to the required density (95% ofproctor density) & upto satisfaction of BHEL & as directed by engineer.

CU.M. 500

17.0 MISCELLANEOUS ITEMS

17.1 Supplying and spreading 150mm size stone chips / gravels in transformer yards CUM 20

17.2

Supply, fabricating and fixing in position transformer gate / fencing as per drg. no:4-38144-00034 including painting with aluminium paint two coats over suitable primer etc.complete., excavation,concreting and post etc tobe measured separately.Contractor to supply all materials.

SQ.M. 30

17.3Providing & laying bitumen sand carpet 50mm thk in two layers of 30mm & 20mm of tank pads including finishing tocorrect slopes, light rolling etc. complete, and directions of the engineer. SQ.M. 150

Al i i l i f t i t17.4 Aluminium angle nosing for stair case steps R.M. 200

17.5Supply and fixing anchor fasteners of FISCHER /HILTI make or approved equivalent of following diameters

a) 10 mm NOS. 50

b) 12 mm NOS. 60

b) 13 mm NOS. 50c) 16 mm NOS. 50

17.6 Providing brick pitching to earthen embankments in CM 1:6 as per dwgs. & specs. SQ.M 50

17.7 Providing Turfing to earthen embankments using cow grass( Pasupalam Conjugatum) SQ.M 100

17.8Providing Anti termite treatment with chlorypyriphis emulsifiable with 1% concentrate as per specifications & dwgs.

SQ.M 2,000

17.9Supplying, fitting & fixing CI gate valves of the following dia for OWS system with all materials etc. complete as perdrgs & spec.

a) 150 mm dia NOS. 6

b) 200 mm dia NOS. 8

c) 250 mm dia NOS. 4

17.10 Cutting and drilling holes for pockets in concrete using diamond cutter upto 200mm Dia.

a) 150 mm deep Nos. 20

b) 200mm deep Nos. 30

c) 300 mm deep Nos. 20

17.11

Supplying, design,manufacturing, packing, despatching and installing at site Physical model of the gas turbinebased simple cycle power plant (with a scale of 1:75) which includes all equipment, skids, ducting, exhaust stack,piping, structures, building, platforms, instrumentation, cable trays, light posts etc. as indicated in the plot plan &other layouts, manufactured from polycarbonate or unbeakable transparent plastic material, with a cover oftransparent polycarbonate alround, lighting etc., all complete as per drawings and specifications.

NOS. 1



OF BIDDER





17.12

Supplying, installing, commissioning of the RO+UV based water purification system of Aquaguard(EurekaForbes) / Kent make for a capacity of 60 litres/hour having 3 outlet taps, confirming to BIS & WHO standards forpotable water, including connection to the water supply system etc., all complete as per spec . (water supply point &Electrical plug point will be provided by the owner near the intallation point)

NOS. 1

17.13

Supplying, installing, storage at site & commissioning of Sculpture Fountain system for a pool size of 4.0 mdiameter with water height rise of 5.0 m from nozzel level, adequate size of submersible pump of reputed brand &make(minimum 1.5 hp), anticorrosive aluminium alloy epoxy coated nozels to avoid corrosion in contact with groundwater, sequencing coloured lights & all water proof copper conductor for wiring, corrosion proof & weather prooffitting & fixures , including all taxes, duties, octroi etc, connection to the water supply system etc., all complete asper drawings & spec . (water supply point & Electrical plug point will be arranged by the owner near the intallationpoint)

NOS. 1

17.14Supplying, installing, Sign Boards of Power Plant and various other buildings & equipment, including installing atrequired elevations above ground level, all complete as per drawings & spec . SQ.M. 40

18.0 FENCING

18.1

Supplying and fixing PVC coated galvanised chain link fencing of minimum 8 gauge, of mesh size 75 mm,conforming to I S : 2721, both ends bent type,mesh size 50 mm, dia.of mesh wire 4 mm , with 2 nos line wire 4 mmdia. including tying to RCC / STEEL posts neatly with GI wires including cost of all materials etc.complete.as perdrawings and specifications.

SQ.M. 400

18.2Supplying and fixing galvanised barbed wire fencing (with PVC coating) of approved quality, including tying toRCC / STEEL posts neatly with GI wires including cost of all materials etc.complete. R.M. 2,400

18.3 Supplying and fixing GI angle poles for fencing all as per drawing and spec. MT 8

19 GROUNDINGD i 40 di thi d f B H E L t L i t 1 d th tti j i ti ldi i ti th

19.1

Drawing 40 mm dia earthing rods from B H E L stores, Laying at 1m depth, cutting, jointing, welding, painting thejoints with bituminous paint after welding and testing underground 40 mm dia MS conductors excluding cost ofexcavation, backfilling, compacting & disposing of the excess earth with all labour, material etc. complete as perdrawing and specifications. ( 40 mm dia MS rod will be issued by BHEL free of cost).(Excavation, backfilling,disposal shall be paid as per respective items.)

R.M. 4,500

19.2

Test Pit Electrode of 3 m deep as per drg. no.:GT57191 with copper pipe electrode, including construction ofmasonry chambers with M.S. covers (for test electrodes), filling with alternate layers charcoal and salt of 300 mmthick layers etc., jointing to under ground earth mat all complete as per drawings and specifications. (All materials to be supplied by contractor)-(Excavation, backfilling, brickwork, plastering, concrete will be paid as per respectiveitems.)

NOS. 30

19.3

Same as above item No-19.2 above with MS pipe electrode (MS pipes will be supplied by BHEL free of cost) withall other materials etc. all complete as per drawing and spec. (All materials to be supplied by contractor) --(Excavation, backfilling, brickwork, plastering, concrete will be paid as per respective items.) Nos. 25

20 DISMANTLING OF STRUCTURE

20.1Dismantling and removal before modification, of the following items of the existing structures with all labour, leadupto 100m, etc. all complete including delivering the usable materials as directed by the Engineer.

a) Concrete(plain) CU.M. 20b)Concrete(reinforced) CU.M. 50c)Brickwork CU.M. 150d)Doors,windows,ventilators SQ.M. 20

e)75 Tk. Premix carpet SQ.M. 50f)Pipe hand rail R.M. 40g)GI Sheetings SQ.M. 350h)Structural Steel MT. 5i)WBM/soling for roads or paving SQ.M. 100

j)Dismantling of false ceiling SQ.M. 100k)Dismantling & Removing of underground pipes & cables up to 200 mm dia, R. M. 100

l)Dismantling & Removing of underground pipes & cables above 200 mm dia R. M. 100



OF BIDDER





21 SOUND BARRIER WALLS

21.1

Supplying, fixing and aligning Sound Barrier walls with Llyodpanel30 as per M/s. Llyod Insulations specifications, torequired height , with all materials, consummables, labour, required scaffolding etc., all complete as per spec. SQ.M. 460

22.0 PILING

22.1Mobilization of piling rigs and ancillary equipments to achieve installation of 14/16 nos pile/day including boringequipments all complete to site for instillation of Bored cast-in-situ R.C.C piles and demobilization from site aftercompletion of work as per specifications.

L.S.

22.2

Construction of 500 mm nominal dia bored cast-in-situ piles using cement concrete (cement not less than 400Kg/cum.)of grade M-25 as per specifications including cost of plant and equipment, labour, materials ( reinforcementwhich will be paid separately as per respective item 5.1a/5.1b) etc. complete. Rate up to 15 m depth below cutofflevel including breaking pile heads to cut off level exposing pile reinforcement for embedment in plie cap complete.Effective lenth of pile shall be measured from cutoff level as per approved drawing to given at the time ofconstruction and rate quoted shall be inclusive of empty boring and casting one meter extra lenth of pile abovecutoff level and exposing the reinforcement by breaking the concrete for embedding in to the pile cap. (Cement willbe supplied by BHEL free of cost as per SCC.)

RM. 6000

22.3

Construction of 450 mm nominal dia bored cast-in-situ piles using cement concrete (cement not less than 400Kg/cum.)of grade M-25 as per specifications including cost of plant and equipment, labour, materials ( reinforcementwhich will be paid separately as per respective item 5.1a/5.1b) etc. complete. Rate up to 15 m depth below cutofflevel including breaking pile heads to cut off level exposing pile reinforcement for embedment in plie cap complete.Effective lenth of pile shall be measured from cutoff level as per approved drawing to given at the time ofconstruction and rate quoted shall be inclusive of empty boring and casting one meter extra lenth of pile abovecutoff level and exposing the reinforcement by breaking the concrete for embedding in to the pile cap(Cement will

RM.

1500

p g y g g p p(be supplied by BHEL free of cost as per SCC.)

22.4 Extra over item no- 22.2 for pile length more than specified length of 15 m for 500 mm dia and 15 m deep (from cut off level) pile RM. 200

22.5Extra over item no- 22.3 for pile length more than specified length of 15 m for 450 mm dia and 15 m deep (from cut off level) pile. RM. 200

a) Rebate to rate item no-22.2 for pile length less than the specified length of 15 m.500 mm dia and 15 m deep (from cut off level) pile RM. 200

b) Rebate to item no-22.3 for pile length less than the specified length of 15 m.450 mm dia and 15 m deep (from cut off level) pile.

RM. 200

22.6

Conducting initial vertical load tests by direct loading on piles including finishing pile head, supply and erection ofall kentledge, labour, compaction etc. all complete as per spec & drawings. (Excavation, backfilling to be paidseparately as per respective item of SOQ).

a) 500mm dia.,15m long– 100 tones capacity pile. NOS. 2

b) 450mm dia.,15m long– 80 tones capacity pile. NOS. 222.7 Same as item No. 22.3 but for routine vertical load test by direct loading.


b) 450mm dia.,15m long– 80 tones capacity pile. NOS. 4

22.8 Same as item No. 22.3 but for initial lateral load test by direct loading.

a) 500mm dia.,15m long– 6.5 tones capacity pile. NOS. 2

b) 450mm dia.,15m long– 5.5 tones capacity pile. NOS. 2

22.9 Same as item No. 22.3 but for routine lateral load test by direct loading.

a) 500mm dia.,15m long– 6.5 tones capacity pile. NOS. 4b) 450mm dia.,15m long– 5.5 tones capacity pile. NOS. 4

22.10 Same as item No. 22.3 but for initial pullout test by direct loading.



22.11 Same as item No. 22.3 but for routine pullout test by direct loading.



OF BIDDER







22.12 Empty boring 500mm dia in ordinary soil. RM. 750

22.13

Providing & fixing one no 40mm ID PVC pipe with minimum wall thk. of 4mm (schedule 80) inside bore pile tofacilitate conducting of Integrity testing of piles through pipe as per drawing, specifications and as directed byBHEL Engineer including cost of labour, installation, materials etc. complete.

RM. 750

22.14

Carrying out pile integrity test on job pile including all arrangements for test, equipments, materials, labour,submission of test report etc but excluding the cost of installation of job pile complete as per specification and asdirected by the engineer-in-charge.

EACH 55

23 One no Tyre mounted (Telescopic Boom) crane of 150 T for structure erection. (crane should be available at site for continuous structural erection work including civil structural steel erection works, including sundays and holidays without any additional cost).

23.1 Mobilisation and de-mobilisation charge. Payments a) 50% on mobilisation, b) Balance 50% on demobilisation. LOT 1

23.2 Monthly lumpsum charge including fuel, opertor and all other charges. CRANE-MONTH

4

24 One no Tyre mounted crane of 30/35 T for general erection / material handling. (crane should be available at site for continuous civil erection works including civil structural steel erection works, including sundays and holidays without any additional cost).

24.1Mobilisation and de-mobilisation charge. Payments a) 50% on mobilisation, b) Balance 50% on demobilisation. LOT

1

24.2 Monthly lumpsum charge including fuel, opertor and all other charges. CRANE-MONTH 12

25.0Providing 2 nos security personal in each three shift, total 6 no per day for 12 months. MAN-

MONTH72

TOTAL VALUE OF COMPLETE CIVIL,STRUTURAL,ARCHITECTURAL WORK,SCH-1 (A) IN RUPEES & INWORDS

26.0 GENERAL

26.1For items not covered under items above, quote % above or below or at par the scheduled rates of DSR 2007 applicable to the area at the time of bidding - Covered in item General in SCH-2 both for SCH-1 & SCH-2



OF BIDDER

SL NO. DESCRIPTION QTY UNIT RATE (IN Rs.)

AMOUNT (IN Rs.)

ENABLING WORKS FOR STORES, OFFICE, ROADS, RCC SLEEPER, HARD SURFACING,DRAIN AND MISC WORKS.

EC 1a

Earthwork in excavation in all kinds of ordinary and hard soil (including slushysoil) up to a depth of 1.5m below ground level and stacking within a lead of 100M,with necessary shoring, strutting, ramming, trimming and dressing of sidesetc., including bailing / pumping out of surface water/rain water/sub soil water,cutting minor vegetation, if any, complete.

1500 CUM

EC1b

Earthwork in excavation in all kinds of ordinary and hard soil (including slushysoil) up to a depth of 1.5m to 3.0m below ground level and stacking within alead of 100 M,with necessary shoring, strutting, ramming, trimming anddressing of sides etc., including bailing / pumping out of surface water/rainwater/sub soil water, cutting minor vegetation, if any, complete.

800 CUM

EC 2

Filling using selected excavated materials in trenches, plinths, sides offoundations and other underground structures, pipes, area levelling etc. in layersnot exceeding 250 mm thickness including lead of 100m and all lifts andincluding loading from stock pile, carting, unloading, filling, watering andcompacting/ramming each layer, all complete as per specifications, drawingsand as directed by the engineer to achieve the following densities with 90%proctor density.

1590 CUM

EC 3

Sand filling (river sand) in plinth in layers not exceeding 15cm as directed byBHEL and consolidating same by thorough saturation with water and rammingcomplete including the cost of supply of sand (payment to be made onmeasurement of finished qty).

760 CUM

EC 4

Single brick flat soling of picked jhama bricks including ramming and dressingbed to the proper level and filing the joints with powder earth or local sandincluding all materials, labour etc. complete.

1220 SQM


CIVIL, STRUCTURAL ARCHITECTURAL AND OTHER MISCELLANEOUS CIVIL ENABLING WORKS FOR 1X20.28 MW GAS TURBINE (Fr 5) ( PKG-I)TOGETHER WITH COMPLETE MATERIALS MANAGEMENT OF ALL PACKAGES AND ERECTION, TESTING, COMMISSIONING ETC OF 1x20.28 MW Fre-5 GTG INCLUDING, ELECTRICAL, C&I ETC. FOR 1x20.28 MW OPEN CYCLE GAS TURBINE (PKG-II) POWER PLANT AT DHULIAJAN, ASSAM

CIVIL ENABLING WORKS - (PACKAGE-I -SCH-2)

TENDER NO - PSER:SCT:DLJ-C1158:10VOL-IIIA, REV-00PAGE 19 OF 54 SIGNATURE WITH SEAL OF BIDDER


AMOUNT (IN Rs.)




EC 5

Plain cement Concrete 1 : 3 : 6 ( 1 cement : 3 sand : 6 graded stone aggregateof 20 mm nominal size) as filling course or lean concrete at any level belowfoundations, drain, septic tank, floors, hume pipes, materials, labour etccomplete. (cement to be supplied by BHEL).

50 CUM

EC 6

Reinforced / plain cement concrete 1 : 1.5 : 3 ( 1 cement : 1.5 sand : 3 gradedstone aggregate of 20 mm nominal size) for foundation, columns, beams,chajjas, RCC sleepers, RCC shelf, over head tanks slab, super structure slabsetc excluding cost of shuttering and reinforcement if any but including allmaterials, labour, curing etc complete all the levels. (cement to be supplied byBHEL).

370 CUM

EC 7

Reinforced/ plain cement concrete 1:2:4 for RCC floor etc. with approved stonechips 20mm down for floor, drain etc excluding cost of shuttering andreinforcement if any but including all materials, labour, curing etc complete allthe levels. (cement to be supplied by BHEL).

45 CUM

EC 8

Damp Proof Course 40mm thk. 1:1.5:3 concrete (10mm down aggregate) with2% of approved admixture of water proofing compound. Hot bitumen @1.7Kg./sqm shall be applied before & after the DPC as per specification.(cement to be supplied by BHEL).

5 SQM

EC 9

Supply, transporting, straightening, cutting, bending, placing at any level, bindingin position mild steel reinforcements in concrete including cost of reinforcementand binding wire, labour etc complete all as per specifications & drawings(Contractor will provide MS round from SAIL/ TISCO/ IISCO/ SRMB/ SHRICON/ SHYAM STEEL/ELEGANT/CONCAST etc).

5 MT



AMOUNT (IN Rs.)




EC10

Supply, transporting, straightening, cutting, bending, placing at any level, bindingin position high yield strength steel reinforcements in concrete including costof reinforcement and binding wire, labour etc complete all as per specifications &drawings (Contractor will provide TMT bar Fe-415/500 quality from SAIL/TISCO/ IISCO/ SRMB/ SHRICON/ SHYAM STEEL /CONCAST etc). Paymentterms - a) On receipt of materials at site - 70%; b) On completion of erection &fixing - 30%.

36 MT

EC11

Hire and labour charges for 25mm thick shuttering for bldg. works for concretefoundations, floor/ roof slabs, beams, lintels, columns, chajja, fins etc includingfitting, fixing and striking out carefully after completion of work for below groundand upto 6m height from finished floor level.

EC11a Without vertical props. 2000 SQM

EC11b With vertical props up to (+)6M height. 400 SQM

EC12

Brick work in cement mortar (1:6) in foundation, plinth, pier, abutment, wing wlls,water tank, septic tank, drains, culvert etc including all materials, labours,scaffolding and other incidental etc. complete. (cement to be supplied by BHEL)

EC12a Ordinary bricks / fly ash bricks, Class designation 75 below plinth lvl. 70 CUM

EC12bOrdinary bricks / fly ash bricks, Class designation 75, above plinth lvl upto 7.0Mheight.

20 CUM

EC13

Half brick work in cement mortar (1 cement :4 sand) in foundation, plinth, pier,abutment, walls, water tank, septic tank, drains, culvert, super structure etcincluding cost of scaffolding and other incidental work etc. completed. (cementto be supplied by BHEL)

EC13a Ordinary bricks / fly ash bricks, Class designation 75, below plinth level. 1000 SQM



AMOUNT (IN Rs.)




EC13bOrdinary bricks / fly ash bricks, Class designation 75, above plinth level upto 7 Mheight. 1600 SQM

EC14

Plaster to existing masonry concrete wall, floor, slab soffits, fins, sills etc withsand cement mortar including rounding off or chenfering corners as directed andracking out joints or roughening of concrete surface including chipping &application of cement slury where necessary etc complete as per drawing anddirection of engineer(cement to be supplied by BHEL)

EC14a With 1:6 cement mortar average 12.5mm thick plaster below GL. 1000 SQM

EC14b With 1:6 cement mortar average 12.5mm thick plaster above GL. 200 SQM

EC14cOutside plaster with 1:4 cement mortar average 15 mm thick above GL at alllevels.

1600 SQM

EC15Dismantling all types masonry excepting cement concrete plain or reinforced ,removing rubbish as directed within a lead of 200 M etc complete. 4 CUM

EC16Dismantling all types of plain or reinforced cement concrete works and removingrubbish as directed within a lead of 200 M. etc complete.

5 CUM

EC17

Repairing crackes in brick wall, concrete kerb, floors etc. by cement sand mortar(1:4) includingwidening the crack on the surface( intoV-section) cleaning andpacking the same and finishing with colour neat cement (if required) to matchwith adjacent surface.

100 METRE

EC18Renewing throating, nosing or drip course moulding with 15 mm thick cementplaster ( 1 cement : 6 sand) complete. 50 METRE



AMOUNT (IN Rs.)




EC19

Supply, fabrication, erection and painting of structural steel work in columns,beams, wind ties, etc with simple rolled structural members connected to onewith another with brackets gusset cleats, bolts & nuts or welding etc as perdesign & direction complete including fabrication, hoisting & erection including allmaterials, labour etc complete with one coat of primer & two coats of syntheticenamel painting (Contractor willl provide structural steel from JINDAL/ SAIL/TISCO/ IISCO/ SRMB/ SHRICON/ SHYAM STEEL/ RINL etc with testcertificate). Payment terms - a) On receipt of materials at site - 70%; b) Oncompletion of erection & fixing - 30%.

10 MT

EC20

Supply, fabrication, erection and painting of steel work with tubular sections asper IS 1161& 1239 for roof truss, purlin etc including all materials conforming torelevant IS codes, labour etc as per drawing, specification and direction ofengineer with one coat of primer and two coats of synthetic enamel painting(Contractor will provide structural steel from JINDAL /BANSAL/ TATA/ SHYAMSTEEL/ RINL etc). Payment terms - a) On receipt of materials at site - 70%; b)On completion of erection & fixing - 30%.

45 MT

EC21

Providing & fixing corrugated galvanised iron sheet (CGI) 0.5mm thick for roofing

of TATA/SAIL/ZINDAL/BANSAL make including galvanised J or L hook, boltsand nuts 8mm dia with bitumen washer 25mmdiax 3mm thick and 1.6 mm thicklimpet washer complete with all labour, tools and plants. Payment terms - a) Onreceipt of materials at site - 70%; b) On completion of erection & fixing - 30%.

1560 SQM

EC22

Providing and fixing galvanised iron ridge 0.5 mm thick and 230 mm lappingson both sides of TATA /SAIL /ZINDAL /BANSAL make including fixingnecessary screws, washers etc complete with all labour and tools and plants.

100 RM



AMOUNT (IN Rs.)




EC23

Providing, transporting, fixing of MS foundation/ anchor bolt (Grade-1 of IS:432& IS:2062) assembly in concrete along with nuts, lock nuts, 25mm dia, 950mmlong including furnishing of labour, materials, welding, etc all complete as perspecification, drawing and instruction of engineer (Contractor will supply allmaterial). Payment terms - a) On receipt of materials at site - 70%; b) Oncompletion of erection & fixing - 30%.

1700 KG

EC24

Supplying, fitting & fixing openable steel window conforming to us IS:1036-1975& IS:7452-1974 with non-friction projecting type of hinges fitted with revetts ornut bolt system as directed, glazing cleats, lugs, 2 nos MS anodised peg stays &fastner for each window of size 900x1200mm, 4mm thick clear glass pane (eachglass max size 450x450mm), including fixing in position, fixing lug in cementconcrete 1:2:4 with stone chips 12.5mm down cutting holes & mending gooddamage, 10mm dia MS round guard bar welded horizontally 125 c/c with eachwindow etc complete with 1 coat of primer and 2 coats of synthetic enamel finishin all respect.

5 SQM

EC25

Supplying, fitting and fixing fixed steel windows for store conforming to usIS:1036-1975 and IS:7452-1974 with glazing, cleats, lugs, 4mm thick clear glasspane (each glass max size 450mmx450mm), etc including fixing in position,fixing lugs in cement concrete 1:2:4 with stone chips 19mm down cutting holes &mending goods damages, with 10mm dia MS round guard bar fixed horizontally125 c/c etc complete with one coat of primer and two coats of synthetic enamelfinish in all respect.

60 SQM

EC26

Priming one coat to timber or steel or plastered surface or other metal surfacewith ready mix paint of approved quantity including smoothening of surface bysand papering etc complete.

30 SQM



AMOUNT (IN Rs.)




EC27

Painting two coats with best quantity synthetic enamel paint ready mix oil boundpaint of approved make and brand including smoothening surface by sandpepering etc including using approved putty etc on the surface if necessary.

EC27a On steel or other metal or wooden surface with super gloss. 50 SQM

EC283 coats white washing with lime including cleaning and smoothening masonrysurface thoroughly to give an even shade.

500 SQM

EC29

Scraping existing old plastered wall and apply plaster of paris 2 mm thickpunning and finished with one coat of acrylic emulsion primer followed by twocoats of acrylic emulsion paint inside office to give smooth and even surfaceas per specification at all levels.

550 SQM

EC30

Two coats of water proofing cement paint of Seacem or equivalent make &shade applied on outer wall including scraping the surface thoroughly onplastered or concrete surface (manufacturers specification to be followed) at alllevels including all materials, labours, scaffelding etc complete as per directionof engineer.

2200 SQM

EC31

Providing & fixing in position rolling shutters of approved make as per IS ,profile type with 18BG of approved type, steel lathe section 75 mm interlockedtogether through their entire length and jointed together at the end by end locksmounted on specially designed pipe shaft with brackets, side guides andarrangements for inside & outside locking including coil wire springs, requiredno of pulleys, providing hood top cover, 2 coats of approved enamel paint overone coat of red lead primer etc, all complete, mechanically operated.(Measurement will be made on the area of opening covered by the rollingshutter). Payment terms - a. On receipt of materials at site - 70%; b. Oncompletion of erection & fixing - 30%. All rolling shutter shall be insidefittings.

150 SQM



AMOUNT (IN Rs.)




EC32

Providing attach toilet with following facilities as directed by BHEL: (a) Insidesize of toilet 1.35x1.35m, (b) 5mm thick white colour ceramic floor tile & insidewalls tile upto 1.2m height from finish floor, (c) 1 white vitreous wash basin450x300mm (Hindustan make or equivalent) with CI bracket, 15mm CP brasspillar taps, 32mm PVC waste water pipe, 32mm CP brass waste, 1 CP towel rail550mm long, 1 best quality 550x400mm mirror etc complete, (d) 1 Europeantype WC pan with seat and lid black colour, low level 10 ltr capacity white PVCflushing cistern, etc (e) all inside pipe lines shall be 15mm/ 20mm PVC &concealed pipes, (f) main external supply water pipe line shall be 25mmdia PVCof 6m, complete in all respect including testing, (g) Soil pipe shall be min 75mmdia CI for below floor if any & outside shall be 100mm PVC of supreme orequivalent. Masonry, plastering & PCC will be paid as per respective items (ratein lumsum for each set of toilet).

5 SET



AMOUNT (IN Rs.)




EC33

Providing common toilet with following facilities as directed by BHEL: (a) Insidesize of toilet 3.7mX2.2m, (b) 5mm thick white colour ceramic floor tile and insidewalls tile upto 1.35 M height from finish floor, (c) two white vitreous wash basin550x400 mm (Hindustan make or equivalent) with CI bracket, 15 mm cp brasspillar taps, 32 mm PVC waste water pipe, 32mm CP brass waste, two CP towelrail 550mm long, two best quality 550x400mm mirror etc complete, (d) one WCchamber 1mx1m size with European type WC pan with seat and lid black colour,low level 10 lts capacity white PVC flushing cistern, etc, (e) all inside pipe lineshall be 15mm /20mm PVC and concealed pipes, (f) main supply externalsupply water pipe line shall be 25mm dia PVC of 12 M, (g) one bathroomsize1mX1m with one 15 CP tap, one CP shower, complete in all respect. (h)three nos. Flat back urinal with automatic high level CI flushing system , 5 litrecapacity with CP connector, (i) Soil/ drain pipe shall be min 75mm dia CI forbelow floor inside if any and outside shall be 100mm dia PVC of supreme orequivalent. Masonry, PCC & plastering will be paid as per respective items (ratein lumsum for each set of toilet).

1 SET

EC34

Consolidation of subgrade/ existing surface with 12 T power roller or vibromaxincluding making good the undulations with earth and rerolling the subgrade forroad, hard surfacing of equipment store,fabrication yard, assembly yard etc asdirected by BHEL.

4000 SQM



AMOUNT (IN Rs.)




EC35

Providing and laying stone for making erection roads with specified sizes ofapproved quality hard rock rubble or hand broken hard metal of sizes rangingfrom 100mm to 225mm, any depths etc in one layers approximately 250mmthickness after compaction, hand packing, filling in interstices with quarry spalls/moorum and providing a layer of 25mm thickness (consolidated) includingwatering, thoroughly compacting layer with 12 tonne power roller or vibromaxwith minimum 8 passes etc all as per the direction of the engineer and as perspecification.

1000 CUM

EC36

Providing & laying water bound macadam base for erection roads, hardsurfacing of open equipment store, preassembly yard etc in layers of requiredthickness with stone aggregate 90mm to 45mm size stone screening andbinding material including screening, sorting, spreading and consolidation withpower road roller 12T including carriage spreading and consolidation of blindingmaterial moorum etc Including cost of material, labour, all complete.

600 CUM

EC37

12 mm thick cement plaster (1:6) with 1mm neat cement punning for drain/septictank etc complete with all materials (excluding cement), labour etc as directed byBHEL.

100 SQM

EC38

1.2M high fencing with MS angle post of size 40X40X5 mm 1.8 M long postplaced every 3M centre to centre embeded in concrete blocks(1:2:4), every 15thpost, last but one end post corner post shall be strutted on both sides and poston one side only and provided with 8 horizontal lines and two diagonalsinterwoven with horizontal wires, of barbed wire 9.38 kg per 100 metres (min)between two post fitted and fixed with GI staples turn buckles, angle post shallbe embeded in plain cement concrete(1:2:4)size 300x300x600mm deep belowground etc complete including excavation, backfilling, concreting, one coat ofprimer, two coat of synthetic enamel paint finish. Contractor will supply allmaterials (excluding cement) , structural steel, paint, labour etc complete.



AMOUNT (IN Rs.)




EC38aFor structural angle post with two coats of bitumen based protective coating etccomplete. 508 KG

EC38b

Supplying, fitting, fixing galvanised chain link fencing of approved quality50mmx50mmx8 g, by means of galvanised `C` clips, with fixing of galvinisedspecial clips etc. Contractor to supply all materials. Angle post to be paidseparately as per item no 2625 (A). Payment terms - a) On receipt of materialsat site - 70%; b) On completion of erection & fixing - 30%.

340 SQM

EC38cFor G I barbed with all fixing etc complete. Contractor to supply all materialsexcluding cement. 350 KG

EC39

Supplying, fabrication and installation of natural colour matt finish 10-12 micronanodised aluminium (Indal or equivalent section) framework for false ceiling with12 mm thick SITATEX random perforated white ceiling tiles (610 mmx610 mm)for false ceiling including vertical drops wherever required, of IS approvedextruded sections with 35mmx25mmx1.2 mm thick main tee placed @ 614 mmc/c grid pattern and 25mmx25mmx1.2mm Al cross tee with Al angle at theperiphery with the walls, the main runners to be suspended from roof truss by4mm GI wire at suitable spacing and 150mm long special J adjustors with100mm long thread for level adjustment upto 0.25mm with double nuts andwashers. The GI wire to be suspended by MS cleat of size 50x50mmx3 mmfixed to RCC slab by special fasteners, including fixing of ceiling boards and costof all accessories, as per specification and direction of engineer.

40 SQM

EC40Providing & laying of 2mm thick PVC flooring & 100mm high skirting with allmaterials & labour etc complete.

500 SQM

EC41

Providing PVC pipe of Supreme or equivalent quality for drinking water systemfor BHEL office with all fittings and fixtures, labour etc complete for BHEL office.



AMOUNT (IN Rs.)




EC41a For external 32mm dia. 35 RM

EC42b For external 40mm dia. 30 RM

EC42c For external 50mm dia. 40 RM

EC43

Providing PVC pipe with fittings and fixtures of Supreme or equivalent make withall materials, labour etc complete for external sewer line/ waste water lineconnection upto open drain or manhole to manhole/ septic tank/ soak pit forBHEL office.

EC43a For external 75mm dia. 17 RM

EC43b For external 100mm dia. 30 RM

EC44

Providing & fixing of wooden solid flush door with commercial ply finish, fittedwith 3 MS hinges, one 8mm dia 150 mm long aluminium tower bolt, 16x300mmlong Al sliding door bolt & 100mm aluminium handle, finished with one coat ofprimer & two coats of synthetic enamel paint etc complete.

EC44a 25 mm thick. 10 SQM

EC44b 30 mm thick. 6 SQM

EC45a

Providing and fixing of wooden frame work with second class sisoo or equivalentfor door frame or partion wall upto ht of 2.7m with wooden batten 65X65mm,50X25mm, 40X25mm etc. includng fixing on wall/floor with MS cleats/ flats andembeded in concrete, finished with one coat of primer & two coats of syntheticenamel paint on exposed surface and bitumenous coat on masonry contactsurface, etc complete with all labour & materials.

0.5 CUM

EC45b

Supplying and fixing 4mm thick commercial ply on wooden frame work with bothside finished with one coat of primer and two coats of synthetic enamel paint forwall partition as well as roofetc complete.

90 SQM



AMOUNT (IN Rs.)




EC46

Suppy, fitting & fixing/ laying of GI pipe as per IS 1239/IS 3589 with allnecessary accessories ie socket, bend, tee, union, cross, elbow, nipple, longscrew, reducing socket, reducing tee, short piece etc complete for makingconnection from deep well/source to water tank for constrcution/ drinking watersystem including cost of all necessry jointing materials labour etc all complete(payment will be made on center line meaurement of total pipeline including allspecials).

EC46a 50 mm dia nominal bore, medium quality 60 RM

EC46b 32 mm nominal bore, meduim quality. 70 RM

EC47 DELETED

EC48

Prviding and laying jhamabrick flat soling joints/voids to be filled with local riversand after preparation of ground with compaction with 10T road roller minimum8 pass, including all materials and labour complete.

10,000 SQM

EC49 DELETED

EC50

Providing and laying NP3 class RCC with collars joint with stiff mixture of cementmortar 1:3 with all materials and labour> All excavation, bacfilling, concreting ifrequired shall be paid as per relevent items.

EC50a 300mm dia 18 RMEC50b 400mm dia 24 RM

ENABLING CIVIL TOTAL (A) IN RS & IN WORDS

EC01

Quote % above or % below or at par for items not covered as above both for Schedule-I ( Main Civil) and Schedule-2 ( CIVIL ENABLING) of Package-I of this tender at the time of Bidding . The rate shall be derived from Delhi schedule of rate 2007.

EC01a (a) Rate of complete item %

EC01b (b) Rate of supply of material at site only %

EC01c (c) Rate for execution of complete excluding supply of materials. %


SL. NO.

DESCRIPTION OF WORK QUANTITY IN METRIC TON (MT)

(A)

QUOTED RATE (IN RUPEES)

PER MT (B)

TOTAL PRICE (IN RUPEES)

C =(A)x(B)

Receipt /Taking delivery of material, unloading from Trucks/Trailers etc. at BHEL Dhuliajan unit-1, site at stores/store yard/ premises, shifting, re-shifting, transportation, stacking, re-stacking including verification at site stores/ storage yard etc. as directed by BHEL engineer and as per Scope given in tender specification for each item as given below:(A) EQUIPMENT(i) 0 to 10 MT 1600

(ii) Above 10 MT 200

(B) Material Re-shifting 150

(C) Material Re-shifting 1503 D) Average single man-hour rate including

overtime, if any, supervision, use of required toolsand tackles and other site expenses andincidentals excluding consumables/ preservativesfor carrying out up-keepment / preservation /conservation work as per instruction of BHEL.

500 MAN-HRS

NOTE1

2

3

2

TOTAL IN RUPEES

( RUPEES _______________________________________________________ only)

RE-SHIFTING: If during execution of work, any material which is already unloaded, verified, stacked atstore yard/store/work site as per instruction and satisfaction of BHEL site authority, needs to be re-handled/re-shifted beyond 250 mtrs. at any other place within project premises, all the relevant activities forabove shall be termed as RE-SHIFTING which will be paid as per the Rate Schedule.

RE-STACKING: If during execution of work, any material which is already unloaded, verified, stacked atstore yard/store/work site as per instruction and satisfaction of BHEL site authority, needs to be re-handled/re-shifted within 250 mtrs. and re-stacked at any other place within identified premises, all therelevant activities for above shall be termed as RE-STACKING which will be paid as per the Rate Schedule.

Some of the consignments may have to be unloaded if reached before Vendor’s mobilisation to site. Scopeand cost of these consignments shall accordingly be adjusted as per the quoted rate of the successfulbidder.

Bidder to note the following for quoting their rates:

1

CIVIL, STRUCTURAL ARCHITECTURAL AND OTHER MISCELLANEOUS CIVIL ENABLING WORKS FOR 1X20.28 MWGAS TURBINE (Fr 5) ( PKG-I) TOGETHER WITH COMPLETE MATERIALS MANAGEMENT OF ALL PACKAGES ANDERECTION, TESTING, COMMISSIONING ETC OF 1x20.28 MW Fre-5 GTG INCLUDING, ELECTRICAL, C&I ETC. FOR1x20.28 MW OPEN CYCLE GAS TURBINE (PKG-II) POWER PLANT AT DHULIAJAN, ASSAM

VOLUME-IIIA ) BOQ CUM RATE/PRICE SCHEDULE, REV-00

PACKAGE-IIA - SCH-3 - MATERIALS MANGEMENT WORK (PART-I)


SL. NO. DESCRIPTION LUMPSUM PRICE IN RUPEES (In figures & words)

1 ERECTION, TESTING AND COMMISSIONING OF 1 x20.28 MW GTG OPEN CYCLE (FRAME-V), WITH ITSASSOCIATED AUXILIARIES, PIPING & GASBOOSTER COMPRESSOR ETC. COVERING TRIAL RUN/RELIABILITY RUN AS DETAILED INSPECIFICATIONAT OIL, DHULIAJAN, ASSAM.

CIVIL, STRUCTURAL ARCHITECTURAL AND OTHER MISCELLANEOUS CIVIL ENABLING WORKS FOR 1X20.28MW GAS TURBINE (Fr 5) ( PKG-I) TOGETHER WITH COMPLETE MATERIALS MANAGEMENT OF ALL PACKAGESAND ERECTION, TESTING, COMMISSIONING ETC OF 1x20.28 MW Fre-5 GTG INCLUDING, ELECTRICAL, C&IETC. FOR 1x20.28 MW OPEN CYCLE GAS TURBINE (PKG-II) POWER PLANT AT DHULIAJAN, ASSAM


PACKAGE-IIA-SCH-4- E&C OF 1X20.28 MW FR-V GTG PACKAGE (PART-II)


A) (I) List Of Electrical PanelsTENTATIVE DIMENSION

(mmxmmxmm)QTY (No. /

mtrs.)Unit

Unit Rate (Rs.) TOTAL AMOUNT

1 Fire Protection Panel (GT) 700 x 700 x 1500 1 No2 GT MCC 8860 x 944 x 2430 1 No

3 Dual Float cum Boost Charger-125V DC / 65Amps

1300 x 800 x 1600 1 No

4 GT DCDB 3260 x 644 x 2430 1 No5 GT Battery VRLA TYPE (62 cells) 1800 x 500 x 1500 1 No6 Hazardous Gas Monitor 161 x 361 x 177.8 1 No7 Mark- VI Panel 1372 x 508 x 2286 1 No8 Station with CPU, Printer 1200 x 1200 x 750 1 No9 Aux. Control Panel 1000 x 915 x 2425 1 No


JOB: CIVIL, STRUCTURAL ARCHITECTURAL AND OTHER MISCELLANEOUS CIVIL ENABLING WORKS FOR 1X20.28 MW GAS TURBINE (Fr 5) ( PKG-I) TOGETHER WITH COMPLETE MATERIALS MANAGEMENT OF ALL PACKAGES AND ERECTION, TESTING, COMMISSIONING ETC OF 1x20.28 MW Fre-5 GTG INCLUDING ELECTRICAL, C&I ETC. FOR 1x20.28 MW OPEN CYCLE GAS TURBINE (PKG-II) POWER PLANT AT DHULIAJAN, ASSAM

PACKAGE-IIB -SCH-5 :- ELECTRICAL AND C&I WORK

10 Battery Charger 834 x 620 x 2030 1 No11 UAT Panel As available at Site 1 No12 Generator Control Panel As available at Site 1 No13 110V DCDB 1660 x 644 x 2430 1 No

14 380kVA DG set with AMF panel & all accessories

4000 x 1200 x 1900 1 No

15 Local Control station a) Start/Stop PB station without Ammeters

280 x 80 x 290 1 No

16 HT Cable termination Kit 1.Cx500mm2 As available at Site 50 Nos

17 Buried & Surface Earthinga) 75 mm x 10 mm GI Strip 75 mm x 10 mm 700 Mb) 50 mm x 6 mm GI Strip 50 mm x 6 mm 200 Mc) 35 mm x 6 mm GI Strip 35 mm x 6 mm 700 Md) 8 SWG GI Wire 8 SWG 200 Me) 65 mm dia, 3m long GI pipe electrode. 65 mm dia, 3m 20 Nos18 Main Gen. Circuit breaker As available at Site 3 Nos19 UAT Circuit breaker As available at Site 3 Nos20 Gen Control – Synchronization Panel As available at Site 1 No21 2 kVA UPS Control Panel As available at Site 1 No22 Aux. Bus-duct for Gen (Incl. CT-PT-NGT) As available at Site 5 M

TENDER NO. PSER:SCT:DLJ-C1158:10VOL-IIIA, REV-00PAGE 34 OF 54 SIGNATURE WITH SEAL OF BIDDER



mtrs.)Unit





23 Numeric Relay/Energy meter As available at Site 1 Set

2431.5 MVA 11KV/11.5KW Dry Type Unit Ratio Transformer As available at Site 1 No

25 HT Station Transformer 11/6.9KVA/3.5 MVA As available at Site 2 Nos26 LT Station Transformer 6.6/0.43KVA/1.6 MVA As available at Site 2 Nos27 Switch gear As available at Site 20 Nos28 DCS Panel As available at Site 26 Nos

A) (II) Electrical Itemsi) 11kV Sw.Board.(Total of 32 Panels) 1 lot

ii) 6 6kV S Bd (T t l f 14 P l ) 1 l t

Dimension of each panel- 820x2350x27001 ii) 6.6kV Sw. Bd (Total of 14 Panels) 1 lot

iii) Neutral Isolation Breaker 1 lot

211/11.5kV,25/31.5MVA,ONAN/ONAF, OCTC, Oil filled Generator Traformer.

8500x8000x65001 No

3 11/6.9kV, 3.5MVA,OFTC Dry Type. 3500x3000x3500 1 NO4 6.6/.433kV,OFTC 1.6MVA, Dry Type 3000x2500x3000 1 NO5 2500A ,415V TPN LT Bus duct 12500x850x500 1 NO

LT Switchgeari) 415V PMCC 13600x1800x2430 1 NOii) 415V BOP MCC 9000x1300x2430 1 NOiii) 415V GT MCC 9000x1300x2430 1 NOiv) 415V AC&VENT MCC 8000x1300x2430 1 NOv) 415V MLDB 3200x1000x2430 1 NOvi) 110V DC ELDB 3200x1000x2430 1 NOvii) 110V DCDB 2400x1000x2430 1 NOviii) 125V DCDB 2400x1000x2430 1 NO ix) 415V ACELDB 2400x1000x2430 1 NOHT Cable Kits.i) 1Cx630 sqmm 11kV, Cu Cables 30 Nosii) 1Cx630Sq.mm, 6.6kV Cu Cables 4 Nos

820x2350x27001

6

7




mtrs.)Unit





iii) 3Cx150 Sq.mm, 6.6kV Cu Cables 12 NosPB Stations

i) Start/Stop PB Station (stop PB with pad locking) 180x285x125 65 Nos

ii) Start/Stop PB Station (stop PB with pad locking) 180x295x125 60 Nos

iii) Start/Stop PB Station with Ammeter (stop PB with pad locking)

180x295x125 60 Nos

iv) Emergency Stop PB (mushroom type) 145x245x116 30 Nos

8

9 110V Station Battery Chargers. (1 Panel) 3000x800x2000 1 No

10 110VStation Battery. (55 cells of 2.23V ) 4405x804x1400 1 No

11 415/415V, 20kVA Emergency Lighting Transformers.1000x600x1200

1 No

12 415/415V, 50k VA Lighting Trafo. 1000x600x1200 2 No

13 Unit auxiliary control panel for 11kV system 6000x1000x2300 1 No

14 Unit auxiliary control panel for 6.6kV system 6000x1000x2300 1 No

15 11kV NGR for Generator Transformer. 1500x1100x2000 1 No

16 6.9 kV NGR for SAT 1500x1100x1500 2 No

17 Rubber Mat for HT Switch Boards 1M x 2M 48 Nos

18 Rubber Mat for LT Switch Boards 1M x 2M 67 Nos

19 11kV (UE)-Armoured Copper Conductor XLPE insulated FRLS outer- sheathed cable.

1Cx630 Sq.mm. 4000 M

206.6kV (UE)-Armoured;Copper Conductor XLPE insulated FRLS outer- sheathed cable.

1Cx630 Sq.mm. 1000 M

HT POWER CABLE PACKAGE




mtrs.)Unit





216.6kV(UE)-Armoured;Copper Conductor XLPE insulated FRLS outer- sheathed cable.

3Cx150 Sq.mm. 1000 M

221.1KV Armoured Cu. Conductor HR-PVC insulated. Extruded FRLS outer sheathed.

3.5C x 300 Sq. mm 2000 M


3.5C x 185 Sq. mm 1500 M


1C x 120 Sq.mm800

M

1 1KV Armoured Cu Conductor HR PVC 3 5C x 95 Sq mm M

LT POWER CABLE PACKAGE


3.5C x 95 Sq. mm2000

M


3.5C x 50 Sq. mm1500

M


3.5C x 35 Sq. mm2000

M


4C x 16 Sq. mm3000

M


4C x 6 Sq. mm2500

M


1C x 150 Sq. mm2000

M

31 1.1KV Un-Armoured Cu. Conductor XLPEinsulated. FRLS outer sheathed.

1C x 35 Sq. mm 2000 M

32 1.1KV Un-Armoured Cu. Conductor XLPEinsulated.FRLS outer sheathed.

1C x 6 Sq. mm 1500 M

33 1.1kV PVC Insulated FRLS Outer Sheathed. 3Cx2.5 Sq. mm 7000 M34 1.1kV PVC Insulated FRLS Outer Sheathed. 5Cx2.5 Sq. mm 5000 M35 1.1kV PVC Insulated FRLS Outer Sheathed. 7Cx2.5 Sq. mm 5000 M

CONTROL & SIGNAL CABLES PACKAGE




mtrs.)Unit





36 1.1kV PVC Insulated FRLS Outer Sheathed. 12Cx2.5 Sq. mm 10000 M37 1.1kV PVC Insulated FRLS Outer Sheathed. 19Cx2.5 Sq. mm 3000 M

38600mm width ladder type straight run cable tray along with accessories including coupler plates

2500 Nos

39600mm width ladder type - Horizontal Tee of 900mm bending radius along with 50 Nos

LADDER TYPE GI CABLE TRAYS

PRE FABRICATED CABLE TRAYS AND ACCESSORIES

accessories including coupler plates

40600mm width ladder type - Horizontal Elbow of 900mm bending radius along with accessories including coupler plates

50 Nos

41600mm width ladder type - vertical up of 900mm bending radius along with accessories including coupler plate.

50 Nos

42600mm width ladder type - vertical down of 900mm bending radius along with accessories including coupler plates.

50 Nos

43600mm width ladder type - horizontal cross of 900mm bending radius along with accessories including coupler plates.

50 Nos

44Cover along with accessories for 600mm width ladder type cable tray.

500 Nos

45300mm width ladder type straight run cable tray along with accessories including coupler plates.

500 Nos

46300mm width ladder type - Horizontal Elbow of 600mm bending radius along with accessories including coupler plates.

10 Nos




mtrs.)Unit





47300mm width ladder type - Horizontal Tee of 600mm bending radius along with accessories including coupler plates.

10 Nos

48300mm width ladder type - vertical up of 600mm bending radius along with accessories including coupler plates.

10 Nos

49300mm width ladder type - vertical down of 600mm bending radius along with 10 accessories including coupler plates.

10 Nos

300mm width ladder type - horizontal cross of 50

yp600mm bending radius along 10 with accessories including coupler plates.

10 Nos

51Cover along with accessories for 300mm width ladder type cable tray.

100 Nos

52150mm width perforated type straight run cable tray along with accessories including coupler plates

1000 Nos

53Cover along with accessories for 150 mm width perforated cable tray

1000 Nos


1000 Nos

55Cover along with accessories for 50 mm width perforated cable tray

1000 Nos


500 Nos

PERFORATED TYPE GI CABLE TRAYS




mtrs.)Unit





57600mm width perforated type - Horizontal Tee of 900mm bending radius along with accessories including coupler plates

15 Nos

58600mm width perforated type - Horizontal Elbow of 900mm bending radius along with accessories including coupler plates.

15 Nos

59600mm width perforated type – vertical up of 900mm bending radius along with accessories including coupler plate.

15 Nos

600mm width perforated type - vertical down of 60 900mm bending radius along with accessories

including coupler plates.15 Nos

61600mm width perforated type – horizontal cross of 900mm bending radius along with accessories including coupler plates.

15 Nos

62Cover for 600mm width perforated type cable tray along with accessories including coupler plates.

250 Nos

63 ISMC 100x50x6 mm Channels 30000 Kgs64 ISA 65x65x6 mm Runner angles 15000 Kgs65 ISA 50x50x6 mm Runner angles 15000 Kgs

66 MS Rod Electrode 50 Nos67 75 x 10mm GI Strips 5000 M68 50 x 6 mm GI Strips 2000 M69 35 x 6mm GI Strips 3000 M70 25 x 6mm GI Strips 2000 M71 8SWG GI wire 1000 M72 16SWG GI wire (stranded) 1000 M

STRUCTURAL STEELS

PLANT EARTHING MATERIAL




mtrs.)Unit





73 3/8” Dia GI fine wire rope 1000 M74 5/8” Dia GI fine wire rope. 1000 M75 65mm dia Pipe Electrodes,3M long, Copper 35 Nos

76 MS Rod Electrode 5 Nos77 50 x 6mm GI Strips 500 M78 25 x 6 mm GI Strip 500 M79 50 x 6mm GI Strips 500 M80 Vertical Air Termination Rod 5 Nos

FIRE PROOF SEALING MATERIALS(Including supply by Vendor)

PLANT LIGHTING PROTECTION

81 Fire Break Coatings for HT/LT Power Cables 300 Kgs

82 Fire Proofing materials for sealing of wall / floor openings and panel bottom

300 Kgs

83 Indoor surface mounted decorative Fixture 350 Nos84 Indoor surface mounted decorative Fixture 25 Nos85 Indoor recess mounted decorative Fixture 100 Nos86 Indoor recess mounted decorative Fixture 25 Nos87 Indoor bulk head Fixture 30 Nos88 Well glass Fixture for GLS lamp 35 Nos89 High bay fixture 20 Nos90 Road Lighting Fixture for 250W HPSB Lamp 40 Nos

91Well glass fixture for high pressure sodium vapour lamp (Non integral type)

400 Nos

92 Road Lighting Fixture for HPSV Lamp 40 Nos93 Flood Light with 250 HPSV SONT Lamps 15 Nos94 Flood Light with 250 HPSV SONT Lamps 18 Nos

FIRE PROOF SEALING MATERIALS(Including supply by Vendor)

PLANT ILLUMINATION SYSTEM

DETAILS OF VARIOUS LIGHTING FIXTURES AND LAMPS

DETAILS OF VARIOUS LIGHTING PANELS AND JBS




mtrs.)Unit





95 Lighting panel with 6 out going feeders 800x600x250 7 Nos96 Lighting panel with 12 out going feeders 900x600x250 15 Nos97 Lighting panel with 18 out going feeders 1000x600x250 5 Nos98 Street Lighting panel with 6 out going feeders 800x600x250 8 Nos99 Street Lighting panel with 12 out going feeders 900x600x250 8 Nos100 Street Lighting panel with 18 out going feeders 1000x600x250 5 Nos101 DC Lighting panel with 6 out going feeders & 800x600x250 8 Nos102 Lighting JB round 88mm Dia 3 way 100 Nos103 Lighting JB rect 150x100x100mm 4 way 100 Nos

FLEXIBLE WIRES

104 2.5 Sq. mm, Red 8500 M105 2.5 Sq. mm, Yellow 8500 M106 2.5 Sq. mm, Blue 8500 M107 2.5 Sq. mm, black 28000 M108 2.5 Sq. mm, green 32000 M109 2.5 Sq. mm, Grey 4500 M110 2.5 Sq. mm, White 4500 M111 4 Sq. mm, Red 1000 M112 4 Sq. mm, Black 3000 M113 4 Sq. mm, Blue 1000 M114 4 Sq. mm, Yellow 1000 M115 4 Sq. mm, Green 3000 M

116 3 mtrs. Lighting pole 130 Nos117 3.75 mtrs. Lighting pole 20 Nos118 8 mtrs. Lighting pole 30 Nos119 11mtr. Lighting pole 15 Nos120 Flexible conduit 19mm DIA 500 Nos121 19mm DIA Down Rod 800 Nos

1.1KV, PVC Insulated Single Core Copper Conductor Flexible Wires

1.1KV, PVC Insulated Single Core Copper Conductor Flexible Wires

FLEXIBLE WIRES

ACCESSORIES FOR ILLUMINATION PACKAGE




mtrs.)Unit





122 GI conduit 25mm Dia 6000 Nos123 GI conduit 50mm Dia 100 Nos124 25 mm DIA Couplers 3000 Nos125 25 mm DIA 90 deg bend 2500 Nos126 25 mm DIA inspection bend 2500 Nos127 Saddles 32000 Nos

128Check nuts & Metal Bushings Suitable for 19mm DIA conduit

3200 Nos

129 Rubber Grommet 500 Nos130 Hooks (U type) 520 Nos130 Hooks (U type) 520 Nos131 HOOKS (S Type) 50 Nos

132Steel chain to support to Fixtures in false ceiling Areas

600 Nos

133 Cable gland OD 18.5 -20mm 100 Nos134 Cable lug 2.5 Sq mm 1500 Nos135 Anchor fasteners (1/2 inch) 50 Nos136 Anchor fasteners (6 mm dia) 2100 Nos137 Anchor with Hooks(6 mm dia) 450 Nos138 4 way conduit branching JB 100 Nos139 3 way conduit branching JB 650 Nos140 Junction Box with ball & Socket 600 Nos141 Dummy junction box with ball & socket 450 Nos142 Clamps for 19mm dia cable 6500 Nos

143SSB-1Surface mounted switchboard with 1 no 5 Amp piano type switch & 5A receptacle with switch.

20 Nos

144SSB-2 Surface mounted switchboard with 2 nos 5 Amp piano type switch & 5A receptacle with switch

20 Nos




mtrs.)Unit





145SSB-3 Surface mounted switchboard with 3 nos 5 Amp piano type switch & 5A receptacle with switch

15 Nos

146SSB-5 Surface mounted switchboard with 5 nos 5 Amp piano type switch & 5A receptacle with switch.

10 Nos

147FSB-3 Flush mounted switch board with 3 nos 5 amps piano type switch & 5A receptacle with switch.

10 Nos

157FSB-5 Flush mounted switch board with 5 nos 5

15 Nos157amps piano type switch & 5A receptacle with switch.

15 Nos

158 5/15 A Plug Sockets 40 Nos159 5/15 A Plug Sockets 40 Nos160 20 A SP Receptacle 10 Nos161 63 A TP Receptacle 20 Nos162 24V Module 10 Nos163 50 mm Perforated cable tray 600 Nos

164 Cable Glands & Lugs. 200 Nos

1656 mm thick chequered plate for covering cutouts in Switch Gear room.

100 Sq.M

166 One meter long earthing discharge rods. 1 No

167Cable Tags 2mm thick, 75mm long, 15mm width Aluminium Strips.

200 Nos

168Trefoil clamps for single core cables 25mm wide 8SWG Aluminium Strips.

800 Nos

169Clamps for multicore cables---25x3mm Aluminium flats

300 Nos

170 3mm dia Nylon Cord 500 M

MISCELLANEOUS ITEMS REQUIRED FOR THE SUBSTATION (Including supply by Vendor)




mtrs.)Unit





171GI Conduits of 100 or 150 mm diameter. Shall be medium duty, Class-“B” Type. Galvanizing thickness shall be minimum 75 microns.

100 Nos

172Hume Pipes for cable at Road Crossing (200 NB) Shall comply to IS: 458.

200 Nos

173 PVC Conduits of 200 mm diameter. 200 M

174Supply of 3.5 core 25 sqmm PVC, armoured Aluminium cable of 1 1 KV grade As per IS 1554

600 RM

MISCELLANEOUS ELECTRICAL WORKS (Including supply of Material by Vendor)

Aluminium cable of 1.1 KV grade. As per IS-1554.

175

Laying of above cable above ground on wall/ surface with clamps etc, chase cutting on wall/ floor, mending good damages, testing & commissioning of 3.5 core 25 sqmm PVC, Aluminium cable of 1.1 KV grade.

120 RM

176

Laying of above cable below ground in excaveted trench average depth 800 mm with 8 nos. of brick on top of the cable per meter including filling the space between brick & cable and also the trench with shifted soil levelling and restoring the surface duly rammed & compacted.

400 RM

177End termination with double compression gland and lugs(including supply)

12 Nos

178Supply & fixing of Iron Clad Main Switches TPN/DP on angle iron frame on wall - 63a TPN.

3 Nos




mtrs.)Unit





179

Supply & fixing of sheet metal (16SWG) iron clad busbar chamber (W=500mmxD=150mm) on angle iron frame duly painted on wall with 4 Al bars (25mmx5mmx600mm) 500V, with adequate nos of holes drilled for connection of incomimg & outgoing ckts, bars are fixed on porcelain insulators including supply of required hardwares for connection, fitted with DANGER board all complete.

3 Nos

180Supply of 4 core 16 sqmm PVC, armoured Aluminium cable of 1 1 KV grade as per IS-1554

400 RMAluminium cable of 1.1 KV grade as per IS 1554.

181

Laying of above cable above ground on wall/ surface with clamps etc, chase cutting on wall/ floor, mending good damages, testing & commissioning of 4 core 16 sqmm PVC, Aluminium cable of 1.1 KV grade.

120 RM

182

Laying , below ground in excaveted trench average depth 800 mm with 8 nos of brick on top of the cable per meter including filling the space between brick & cable and also the trench with shifted soil levelling and restoring the surface duly rammed & compacted.

400 RM

183End termination with double compression gland and lugs(including supply).

25 Nos

184Supply & fixing of Iron Clad Main Switches TPN/DP on angle iron frame duly painted on wall with all required materials, hardwares, etc.

185a 30/32A TPN. 8 No185b 16A DP. 22 No




mtrs.)Unit





186

Supply, drawing through PVC conduit, termination, testing & commissioning of 1 core 2.5 sqmm PVC insulated, stranded Copper wire of 1.1 KV grade as wiring for lighting & power.

720 RM

187

Supply and fixing of 1" dia rigid PVC conduit with all bends, tees, reducers, circular box, clamps, saddles, etc along with the accessories in surface/ recess in beam/ roof slab/ wall/ false ceilling and making good the same as required.

3300 RM

Supply and fixing of 1" dia flexible PVC conduit with

188all bends, tees, reducers, circular box, clamps, saddles, etc along with the accessories in surface/ recess in beam/ roof slab/ wall/ false ceilling and making good the same as required.

144 RM

189

Supply & fixing composite flush type 250V, 6 pin 15 A plug-socket-integral fuse unit with 15A piano key type swich on sheet metal box with bakelite cover and earthing attachment including S&F of matching PVC box, make - ANCHOR/ NORTH-EAST.

24 Nos

190

Supply & fixing composite flush type 250V, 5 pin 5 A plug socket-integral fuse with 5A piano key type swich on sheet metal box with bakelite cover and earthing attachment including S&F of matching PVC box, make - ANCHOR/ NORTH-EAST.

30 Nos

191 Supply & fixing of Ceiling Rose on circular boxes. 75 Nos




mtrs.)Unit





192

Supply of outdoor luminaires type 1x70 W HPSV lamps in cast aluminium body with acrylic cover along with lamps, control gear, etc including all fixing/ supporting accessories complete, model - BJMSC-70SV of BAJAJ or equivalent of PHILIPS/ CROMPTON.(including all supply items)

30 Nos

193

Fixing on wall with 40 mm dia swan neck GI pipe with suitable clamps etc & commissioning of outdoor luminaires suitable for 1x70 W HPSV lamps in cast Al body with acrylic cover along with lamps including 30 Nosy y g p gall fixing/ supporting accessories complete and flexible wire for connection between ceiling rose & fitting.(including all supply items)

194

Supply of Indoor type luminaries 1x150 W medium bay industrial type, model BJMBI-150SV of BAJAJ or equivalent of PHILIPS/ CROMPTON.(including all supply items)

30 Nos

195

Fixing from roof truss with suitable clamp arrangement, flexible wire for connection between ceiling rose & fitting and commissioning of type HPSV luminaries medium bay industrial type, model BJMBI-150SV of BAJAJ or equivalent of PHILIPS/ CROMPTON.(including all supply items)

75

196Supply & installation of earth electrode 40 mm dia 3 metre long GI pipe directly driven into earth including earth excavation if required.

21 Nos

197Supplying & installation of 16 SWG GI wire for earthing including supply & termination with lugs as required.

2250 RM




mtrs.)Unit





198Supplying & installation of 8 SWG GI wire for earthing including supply & termination with lugs as required.

144 RM

199 HIGH MAST ILLUMINATION ITEM 8 Nos

UnitB)1 UPS sys with battery (1000 Kgs) 1 No2 ON-OFF Control valves (Approximately 100 Kgs) 8 Nos3 Control Valves (approximately 100 Kg’s) 2 Nos

SIZE QTY (No./ mtrs.)

Unit Rate (Rs.) Total (Rs.)

C & I Items

3 Control Valves (approximately 100 Kg s) 2 Nos

4Temperature safety valves(Approximate weight 100kgs each)

2 Nos

5 Mass Flow Meter/ Vortex flow meter (HART) 2 Nos6 Orifice Plate Assy. 5 Nos7 Diff. Pressure transmitter (HART) 10 Nos8 Pressure transmitters (HART) 20 Nos9 Temperature Elements 15 Nos10 Temperature gauges 35 Nos11 Pressure gauges 40 Nos12 Thermo well 35 Nos13 Temperature Transmitter(HART) 5 Nos14 Level gauge 5 Nos15 Level switch 5 Nos16 Hand Held Communicator (HART) 2 Nos17 Pressure Switch 5 Nos18 Temperature Switch 5 Nos19 DELETED




mtrs.)Unit





20

Instrumentation items for on skid GTG Package and their other auxiliary packages consisting of Pressure Guages, Tranmitter, lavel gauges, Flow meter, Temperature element , Junction Boxes (3 nos skid)

1 Lot

On skid instruments for sub packages like- Instrument air system-- Gas booster compressors Lot - Gas conditioning system

121

- Various storage and drain tanks22 Gauge boards on equipment skids 6 Nos23 Dry temperature bath

Signal SimulatorDigital Slid Calibrator

24 Off line portable ambient monitoring system 1 Set set

25Equipments & items supplied by PSR contractors, if any.

1 Set set

1 Needle Valve 180 Nos2 Gate Valves- ½” 220 Nos3 Globe Valves 200 Nos4 Ball Valves 120 Nos5 Tube. Fittings 200 Nos

6 Pipe Fittings, Nipples Of Alloy Steel, Carbon Steel, SS 500 Nos

7 Condensing Chambers And Syphons 30 Nos8 Air Filter Regulators 50 Nos

Impulse Pipes &Tubes ForImpulse Connection For Inst.9

Instrument Installation materials, Tubes and Fittings




mtrs.)Unit





Hookup( i) SS Tube 12.7 X 2.1 Mm 1500 M( ii) SS Pipe 21.3 X 3.7 Mm 1500 M( iii) SS Pipe 33.4 X 3.4 Mm 500 M(iv) SS Tube 6 Mm Mm 500 M(v) SS Pipes 1” for Instrument air 200 M

10

AC UPS system consisting of: • Battery Banks • Inverter & charger panels- 3 nos

1 Set

Scope of Erection & commissioning

Inverter & charger panels 3 nos • Distribution Boards

11

Continuous Emission monitoring System consiting of • Analyzer Panel - 1 No. • Gas Cylinders • Sample lines

1 Set

12

CCTV System consisting of: * Camera -6 nos mounted at strategic location within plant boundary limit * Monitor- 2 no (1-located at local control room 2-Located at security room) * Configuration Work station- 1 no located at rack room * Required hardware to meet above operation like matrix switcher, RDU unit, recorder, power supply, cables & mounting accessories * Supervision of E & C

1 Set

SIGNAL CABLES

Turnkey Packages




mtrs.)Unit





13Signal cable 1 P x 1.5 mm2 Non-IS Indi & Overall Shld

10000 M

14 Signal cable 1 P x 1.5 mm2 Non-IS Overall Shld 10000 M

15Signal cable 6 P x 0.5 mm2 Non-IS Indi & Overall Shld

20000 M

16 Signal cable 1 T x 1.5 mm2 Indi & Overall Shld 5000 M17 Signal cable 8 T x 0.5 mm2 Overall Shld 8000 M1819

Cables for CCTV system

DELETEDDELETED

Cables for CCTV system20 3 x 1.5 mm Control cable (control & video signal) 6000 M21 3 x 1.5 sq.mm Power cable 5000 M21A Fibre Optic Cable, Multimode, 4-Core 1000 M

22EXPLOSION/WEATHER PROOF JUNCTION BOXES, WP65 With ex proof cable glands & PVC sleeves

30 Nos

23 Instruments & Junction box canopies 50 Nos

24 Size- for 0.5 mm2 cable 500 M25 Size- for 1 mm2 cable 500 M26 Size- for 1.5 mm2 cable 600 M27 Size- for 2.5 mm2 cable 500 M

28Cable Supporting channels/ angles (MS) with clamps, from JB to instrument

800 Kgs

292” GI pipe for transmitter and JB mounting & Support set up

500 M

30 2” Pipe Caps 200 Nos31 2” GI pipe Elbow 200 Nos

ERECTION MATERIALS REQUIRED TO BE SUPPLIED BY THE VENDOR




mtrs.)Unit





32MS angle iron- 50x50x6 mm for panel base frame & its site fabrication

1000 Kgs

33MS angle iron- 50x50x6 mm for JB mounting & its site fabrication

1000 Kgs

34 Impulse line supporting clamps for35 Pipe-3/4” 100 Nos36 Pipe-1/2” 100 Nos37 Tube-1/4” 100 Nos39 Plates (6mm TH) MS 800 Kgs40 Base Plates (6mm TH) 250mm x 250mm, MS 10 Nos40 Base Plates (6mm TH) 250mm x 250mm, MS 10 Nos41 Angle 40x40x4 mm, MS EQUAL 200 Kgs42 Angle 35x35x4 mm, MS EQUAL 200 Kgs43 Angle 50x50x6 mm, MS EQUAL 200 Kgs44 ISMC 100x50 mm Channel, MS 200 Kgs45 6 mm TH plate, MS 300 Kgs46 50 x 6 mm Flat, MS 200 Kgs

1 Bidders to arrange and supply all required cable glands & lugs [(Ex- proof) ), Double compression, Ni coated brass/SS etc] of sizes (i/2", 3/4",1". 1-1/4', 1-1/2" , 2", etc ) free of cost for completeness of erection. For electrical scope of work also, The Bidders to note that they have tosupply free of cost completeness of erection all required cable Gland and Lugs etc . To give a general idea to the bidders it may be noted thatfor the electical portion of work following cable galds & lugs are required tentatively : a) Cable Gland-13-300 nos, 20.5-50 nos; 23.5 -75 nos, 26.5-75 nos, 30.5-10 nos, 37.5-10 nos, 41.5-20 nos, 52.5 - 25 nos, 61.5-67 mm - 10nos, b) Cable Lugs - 6 Sq.M- 50 nos, 16 Sq.M-50 Nos,35 Sq.M -50 Nos, 50, Sq.M-30 Nos, 95 Sq.M -20 Nos,120 Sq.M - 20 Nos., 150 Sq.M -20 Nos, 185Sq.M - 20 Nos, 240 Sq.M - 10 Nos, 300 Sq.M - 15 Nos. However, anything additional required need to be supplied by the bidder free of cost.

NOTE:

GRAND TOTAL




mtrs.)Unit





2

3

Bidders to provide all required PVC Cable Gland shrouds (covers), Name plates/Tag plates with tying/fixing required material for cable’s bothend & field instruments, Cable ferruling numbers & characters, Cable Markers including Adapters for cable glands & Junction boxes free of costfor completness of erection.

Bidders to arrange & supply all required Nuts & Bolts, Clamps, Cable Fastening Material, Nut , bolts, washers, False flooring Base frame standfor panels etc free of cost for completeness of erection


Download - File-6-SCT-DLJ-C1158-VOL-IIIA- Price schedule · bharat heavy electricals limited ... associated piping including electrical, ... project open cycle gas turbine power plant at dhuliajan,

Top Related