Download - Final presentation
Automatic control of three phase Induction motor
Name of the industry:- ELCEN Machines Pvt. Ltd.,Vadodara.
Guided By:- Internal Guide:-Mukesh M Bhesania External Guide:-Dhankesh Patel
Prepared by Gunjan Dave(090110109023)
Jalpam Suthar(090110109030) Viral Shah(090110109065)
AUTOMATIC CONTROL OF INDUCTION MOTOR 1May 1, 2023
AbstractAbstract
The project is about Automatic remote control of Induction motor.
It will be achieved by use of a GSM based system which will isolate the object(induction motor)from the healthy system during faulty conditions like overvoltage, over current, and overload.
AUTOMATIC CONTROL OF INDUCTION MOTOR 2
Idea of the projectIdea of the project
To detect the line voltage and current and compare with the preset limits.
If the input fed is out of the domain of the safe limits then the system will send an SMS to the registered number and will also sound a buzzer to alarm the operator.
AUTOMATIC CONTROL OF INDUCTION MOTOR 3
AUTOMATIC CONTROL OF INDUCTION MOTOR 4
Signal FlowSignal Flow(1) Sensor:- CT, PT and temperature sensor will
monitor the input to the induction motor and will transfer them to the microcontroller for analysis.
(2) ADC:-It will make the analog signals from sensors fit for the microcontroller as it can only operate on digital signals.
(3) Micro-controller:-As per the input provided by the sensing elements microcontroller will process them accordingly to carry out intended operations. AUTOMATIC CONTROL OF INDUCTION
MOTOR 5
(4) MAX 232:- It is an interfacing element between M/C and GSM modem as both works on a different levels.
(5) GSM Module:-The GSM module will receive and send messages and decode the commands which will be stored in the Sim memory.
(6) LCD:-The display will show the status of the motor parameters during faulty as well as healthy conditions.
AUTOMATIC CONTROL OF INDUCTION MOTOR 6
Flow ChartFlow Chart
AUTOMATIC CONTROL OF INDUCTION MOTOR 7
COMPONENTSCOMPONENTSUSEDUSED
AUTOMATIC CONTROL OF INDUCTION MOTOR 8
GSM MODULE-SIM 300CGSM MODULE-SIM 300C
This is a high performance GSM module which supports 900/1800/1900 MHz for voice and SMS communication.
It can be interfaced easily using AT commands.
AUTOMATIC CONTROL OF INDUCTION MOTOR 9
• 8K x 14 words of FLASH program memory• 368 x 8 bytes RAM• 256 x 8 bytes of EEPROM
AUTOMATIC CONTROL OF INDUCTION MOTOR
Advantages:-
The IC has enough of the required RAM and ROMIn-built ADC channelHence, there is no need to install extra chips which saves money and it also makes the system compact.
10
AUTOMATIC CONTROL OF INDUCTION MOTOR
1.Potential Transformer 2.Relay
3.Current Transformer 4.LCD
11
Proposed system circuit diagramProposed system circuit diagram
AUTOMATIC CONTROL OF INDUCTION MOTOR 12
Circuit DescriptionCircuit DescriptionThe whole assembly can be subdivided into
following parts:-
1.Power unit2.Microcontroller3.Sensor Input4.Communication Circuit5.Switching Circuit
AUTOMATIC CONTROL OF INDUCTION MOTOR 13
1.Power unit
AUTOMATIC CONTROL OF INDUCTION MOTOR 14
Supply voltage
2.Microcontroller
AUTOMATIC CONTROL OF INDUCTION MOTOR 15
AUTOMATIC CONTROL OF INDUCTION MOTOR 16
3.Sensor Input
AUTOMATIC CONTROL OF INDUCTION MOTOR 17
PotentialPotentialTransformerTransformer Basic amplifierBasic amplifier
Overvoltage comparatorOvervoltage comparator
Under-voltage comparatorUnder-voltage comparator
1.1. PT InterfacingPT Interfacing
Output during overvoltageOutput during overvoltage
AUTOMATIC CONTROL OF INDUCTION MOTOR 18
-5v-5v
5v5v
Output during under voltageOutput during under voltage
AUTOMATIC CONTROL OF INDUCTION MOTOR 19
+5v+5v
-5v-5v
AUTOMATIC CONTROL OF INDUCTION MOTOR 20
2.2. CT InterfacingCT Interfacing
Current TransformerCurrent Transformer Basic Amplifier Over current comparatorOver current comparator
During over currentDuring over current
AUTOMATIC CONTROL OF INDUCTION MOTOR 21
-5v-5v
4.Communication Circuit
AUTOMATIC CONTROL OF INDUCTION MOTOR 22
5.Switching Circuit
AUTOMATIC CONTROL OF INDUCTION MOTOR 23
Other features of the systemOther features of the systemTemperature sensor :-
LM-35
• Temperature range: -55 ⁰C to 150 ⁰C• Accuracy: +1.5 ⁰C• Output scale: 10mV/ ⁰C
AUTOMATIC CONTROL OF INDUCTION MOTOR 24
To microcontroller
RPM sensor :-
AUTOMATIC CONTROL OF INDUCTION MOTOR 25
Light Sensor Schmitt Trigger(HCF4093)
Waveforms of Schmitt trigger
AUTOMATIC CONTROL OF INDUCTION MOTOR 26
ADVANTAGESADVANTAGES1. The system thus produced will be very low cost and will
require very less maintenance due to no moving parts.
2. It will be very compact and easily transportable.
3. It will provide a two way control i.e. from remote places as well as by on the site.
4. No highly skilled personnel is required.
5. The device thus developed will consume very less power
AUTOMATIC CONTROL OF INDUCTION MOTOR 27
Application of the projectApplication of the project
The System can be used to perform following functions:-
1.It can be used to switch the motor ON and OFF.
2.The parameters of the motor can be known from any distant place.
3.The system will provide protection against faults like overvoltage, over current and overload.
AUTOMATIC CONTROL OF INDUCTION MOTOR 28
Future PlanFuture Plan hardware implementation
Different software modules
AUTOMATIC CONTROL OF INDUCTION MOTOR 29
ReferencesReferencesELECTRICAL MACHINES by B.L.THAREJATHE 8051 MICROCONTROLLER AND EMBEDDED
SYSTEM by MUHAMMAD ALI MAZIDIwww.google.comhttp://chipscity.comwww.atmel.comwww.wikipedia.comhttp://microcontroller51.blogspot.in
AUTOMATIC CONTROL OF INDUCTION MOTOR 30
THANK YOUTHANK YOU
AUTOMATIC CONTROL OF INDUCTION MOTOR 31