![Page 1: FITMENT GUIDE FOR R2629P · 3. Clean mating face for bevel cut gasket, apply film of diesel fuel to gasket and fit to housing. 4: Apply film of diesel fuel to “O” ring and fit](https://reader033.vdocument.in/reader033/viewer/2022050217/5f62f160be55c17676144c25/html5/thumbnails/1.jpg)
Reusable lid,
Filter Element.
“O” Ring seal.
Bevel cut gasket.
Filter housing.
“O” Ring seal groove.
Bevel cut gasket seat.
1: Remove housing lid using a filter “strap-wrench”. Do not damage as lid is to be used again.2: Remove and discard filter, “O” ring and bevel cut gasket.3. Clean mating face for bevel cut gasket, apply film of diesel fuel to gasket and fit to housing.4: Apply film of diesel fuel to “O” ring and fit to filter element then fit new filter to housing.5: Fit lid to housing slowly (allow fuel to soak into element) Tighten until lid contacts housing body.
AUSTRALIAGUD Automotive Pty Ltd29 Taras Avenue, Altona NorthVictoria 3025 Australia.www.ryco�lters.com.au
NEW ZEALANDGUD Automotive - A division of GUD (NZ) Holdings Limited626A Rosebank Road AvondaleAuckland, New Zealandwww.ryco.co.nz
SOCIAL NETWORKSFacebook: http://facebook.com/ryco�ltersYouTube: http://youtube.com/ryco�lters1Twitter: http://twitter.com/Ryco_Filters
FITMENT GUIDE FOR R2629P