-
UN PRODUIT PAR A PRODUCT By
Produits en acier inoxydable
Stainless steel products
-
UN PRODUIT PARA PRODUCT By
PRODUITS // PRODUCTS
Produits en acier inoxydableStainless steel products
2 PRODUITS PLATSSTEEL FLAT PRODUCTS
3 PRODUITS TUBULAIRESTUBULAR PRODUCTS
1 TYPE D’ACIERTyPES OF STEELS
4 PROCÉDÉ ADDITIONELSADDITIONAL PROCESSES
2.1 / FEUILLARDS ET TÔLES2.1 / STRIPS AND SHEETS
66
2.2 / FEUILLARDS INOX LAMINES A FROID2.2 / COLD ROLLED HARDENED STAINLESS STEELS
67
2.3 / TÔLES2.3 / SHEETS
68
2.4 / PLAQUES2.4 / PLATES
69
2.5 / FINITIONS DES SURFACES2.5 / SURFACE FINISHES
70
2.6 / TOLÉRANCES2.6 / TOLERANCES
72
2.6.1 / TOLERANCES DES TÔLES ET FEUILLARDS LAMINE AU FROID2.6.1 / GENERAL TOLERANCES FOR COLD ROLLED COILS AND STRIPS
72
2.6.2 / TOLERANCES DES TÔLES ET FEUILLARDS LAMINES AU CHAUD 2.6.2 / GENERAL TOLERANCES FOR HOT ROLLED COILS AND STRIPS
74
2.6.3 / TOLÉRANCES GÉNÉRALES DES PLAQUES2.6.3 / GENERAL TOLERANCES FOR PLATES
75
3.1 / TUBES RONDS3.1 / ROUND TUBES
78
3.2 / TUBES CARRÉS3.2 / SQUARE TUBES
79
3.3 / TUBES RECTANGULAIRES3.3 / RECTANGULAR TUBES
80
3.4 / FINITIONS DES SURFACES3.4 / SURFACE FINISHES
82
3.5 / TOLÉRANCES ET FINITIONS3.5 / TOLERANCES AND FINISHES
84
3.5.1 / TOLÉRANCES DIMENSIONELLES POUR LES TUBES RONDS3.5.1 / DIMENSIONAL TOLERANCES FOR ROUND TUBES
84
3.5.2 /TOLÉRANCES DIMENSIONELLES POU LES TUBES CARRÉS ET RECTANGULAIRES3.5.2 / DIMENSIONAL TOLERANCES FOR SQUARE AND RECTANGULAR TUBES
85
66
77
86
EMBALLAGESPACKAGING
87
62
-
FLINSA. CATALOGUE GÉNÉRAL// GENERAL CATALOGUEFLINSA. CATALOGUE GÉNÉRAL // GENERAL CATALOGUE60 61
Dans le cadre de la politique d’expansion de FLINSA se trouve son positionnement sur le marché des aciers inoxydables, comptant pour cela avec sa grande expérience et ses vastes connaissances disponibles des aciers au carbone, et s’appuyant sur notre service et qualité
Pour cela nous offrons au marché une large gamme de produits tubulaires, fabriqués en aciers austénitiques et ferritiques, autant que des produits plats: rouleaux et bandes, feuillards laminé à froid, bandes et tôles, en aciers austénitiques, ferritiques et martensitiques.
Notre gamme de produits tubulaires, soudées par LASER, comprend des tubes ronds (EN 10269-2) de diamètre 10 jusqu’à 104 mm, des tubes carrés et rectangulaires dérivés (EN 10305-5).
Les secteurs ou sont destinées nos produits inoxydables couvrent le secteur d’automobile, la construction (éléments de structure et de décoration) des meubles métalliques, du mobilier urbain, l’alimentation, pharmaceutique, etc.
Within the policy of expanding FLINSA is the positioning in the market of stainless steels, counting with the extensive experience and knowledge that are available on carbon steels, supported by our quality and service.
For this we offer the market a wide range of tubular products both manufactured in austenitic and ferritic steels, flat products such as coils and strips, cold rolled hardened strips, plates and sheets, all in austenitic, ferritic and matensitic stainless steels.
Our range of tubular products, welded by LASER technology, includes round tubes (EN 10269-2) diameter from 10 to 104 mm. and their square and rectangular derivative shapes (EN 10305-5).
The markets in which our stainless products are intended for cover automotive, construction (structural elements and decoration), metal and street furniture, food, pharmaceutical, etc.
Produits inoxydableStainless steel products
-
FLINSA. CATALOGUE GÉNÉRAL// GENERAL CATALOGUEFLINSA. CATALOGUE GÉNÉRAL // GENERAL CATALOGUE62 63
EN 10088-2 État de livraison des aciers austenitiquesSupply condition of austenitic stainless steels
Nuance*Grade *
EN1.4310 1.4301 1.4307 1.4401 1.4432 1.4541
X10CrNi18-8 X5CrNi18-10 X2CrNi18-9 X5CrNiMo17-12-2 X2CrNiMo17-12-3 X6CrNiTi18-10
AISI 301 304 304L 316 316L 321
Composition chimique( valeur %)Chemical composition(values in %)
C 0,05-0,15 ≤0,070 ≤0,030 ≤0,070 ≤0,030 ≤0,080
Si ≤2,00 ≤1,00 ≤1,00 ≤1,00 ≤1,00 ≤1,00
Mn ≤2,00 ≤2,00 ≤2,00 ≤2,00 ≤ 2,00 ≤2,00
P ≤0,045 ≤0,045 ≤0,045 ≤0,045 ≤0,045 ≤0,045
S ≤0,015 ≤ 0,015 ≤0,015 ≤0,015 ≤0,015 ≤0,015
N ≤0,11 ≤0,11 ≤0,11 ≤0,11 ≤0,11 -
Cr 16,0-19,0 17,5-19,5 17,5-19,5 16,5-18,5 16,5-18,5 17,0-19,0
Ni 6,0-9,5 8,0-10,5 8,0-10,5 10,0-13,0 10,5-13,0 9,0-12,0
Mo ≤0,80 - - 2-2,5 2,5-3,0 -
Weitere / Other - - - - - Ti: 5xC – 0.70
Caractéristiques mécaniquesMechanical properties
Rp0,2 long. mín(4)
(N/mm²)
C(2)250
230 220 240 240 220
H(3) 210 200 220 220 200
Rm(N/mm²)
C(2) 600÷950 540÷750520÷700 530÷680 550÷700 520÷720
H(3) 520÷720
A80 (%) mín C(2) / H(3) 40 45 45 40 40 40
PREN (1) (Théorique) min // PREN(1) (theorical) min.=%Cr+3.3(%Mo+0.5%W)+16%N
18,6 17,50 17,5 23,1 24,75 17,0
Poids spécifique/ Specific Weight (g/cm3)
7,9 7,9 7,9 8 8 7,9
(1) PREN (indice de résistance à la corrosion par piqûres) | (2) matériel laminé à chaud | (3) Matériel laminé à froid | (4) Limite élastique conventionnel
(1) PREN (Pitting corrosion resistance degree) | (2) Hot rolled material | (3) Cold rolled material | (4) Standard yield limit
* Aciers Duplex et Superduplex sur demande. // * Duplex y Superduplex stainless steels under request
Micrographie d’un acier AISI-430 où on apprécie les grains d’austénite (marron) et nitrures précipités (violet) AISI-304 steel micrograph where there are shown austenite grains (brown) with nitride precipitates (violet)
NUANCES D’ACIERTyPES OF STEELS
1
ACIERS INOXYDABLES AUSTENITIQUESAUSTENITIC STAINLESS STEELS
Produits inoxydableStainless steel products
-
FLINSA. CATALOGUE GÉNÉRAL// GENERAL CATALOGUEFLINSA. CATALOGUE GÉNÉRAL // GENERAL CATALOGUE64 65
EN 10088-2 État de livraison des aciers ferritiques et martensitiquesState for delivery of ferritic and martensitic stainless steels
Nuance*Grade *
EN1.4512 1.4016 1.4511 1.4510 1.4509 1.4021 1.4116
X2CrTi12 X6Cr17 X3CrNb17 X3CrTi17 X2CrTiNb18 X20Cr13 X50CrMoV15
AISI 409 430 430Ti* 439 441 420 420MoV
Composition chimique(valeur %)Chemical composition(values in %)
C ≤0,030 ≤0,08 ≤0,050 ≤0,050 ≤0,030 0,16-0,25 0,45-0,55
Si ≤1,00 ≤1,00 ≤1,00 ≤1,00 ≤1,00 ≤1,00 ≤1,00
Mn ≤1,00 ≤1,00 ≤1,00 ≤1,00 ≤1,00 ≤1,00 ≤1,00
P ≤0,040 ≤0,040 ≤0,040 ≤0,040 ≤0,040 ≤0,040 ≤0,040
S ≤0,015 ≤0,015 ≤0,015 ≤0,015 ≤0,015 ≤0,015 ≤0,015
N - - - - - ≥0,020 -
Cr 10,5-12,5 16,0-18,0 16,0-18,0 16,0-18,0 17,5-18,5 12,0-1,04 14,0-15,0
Ni - - - - -
Autres Other
Ti: Nb: Ti: Nb: min: [(3xC)+0,30]; max: 1,00; Ti:0,10 - 0,60
-Mo: 0,50-0,80V: 0,10-0,20[6x(C+N)] - 0,65 - 12xC-1,0 4x(C+N)+0,15 – 0.80
Caractéristiques mécaniquesMechanical properties
Rp0,2 long. mín(4)
(N/mm²)
C(2)210
260230 230 230 - -
H(3) 240
Rm(N/mm²)
C(2)380÷560 450÷600 420÷600 420÷600 430÷630 ≤700 ≤850
H(3)
A80 (%) mín C(2) / H(3) 25 20 / 18 23 23 18 15 12
PREN (1) (Théorique) min // PREN(1) (theorical) min.=%Cr+3.3(%Mo+0.5%W)+16%N
10,5 16 16 16 17,5 12,3 15,7
Poids spécifique // Specific Weight (gr/cm3)
7,7 7,7 7,7 7,7 7,7 7,7 7,7
Structure Structure
ferritischeferritic
ferritischeferritic
ferritischeferritic
ferritischeferritic
ferritischeferritic
martensitischemartensitic
martensitischemartensitic
(1) PREN (indice de résistance à la corrosion par piqûres) | (2) matériel laminé à chaud | (3) Matériel laminé à froid | (4) Limite élastique conventionnel
(1) PREN (Pitting corrosion resistance degree) | (2) Hot rolled material | (3) Cold rolled material | (4) Standard yield limit
* Aciers Duplex et Superduplex sur demande. // * Duplex y Superduplex stainless steels under request
Micrographie d’un acier AISI-420 où on apprécie le cristal de martensite. AISI-420 steel micrograph where are shown martensite needles
ACIERS FERRITIQUES ET MARTENSITIQUESFERRITIC AND MARTENSITIC STAINLESS STEELS
Micrographie d’un acier AISI-430 où l’on apprécie que100% de la structures est formée pardes grains de ferrite.AISI-430 micrograph where the 100% of the structure is formed by ferrite grains.
Produits inoxydableStainless steel products
-
FLINSA. CATALOGUE GÉNÉRAL// GENERAL CATALOGUEFLINSA. CATALOGUE GÉNÉRAL // GENERAL CATALOGUE66 67
EN 10088-2Niveaux disponibles de limite élastique (Rp0.2) de nuances d’acier à l’état d’ecrouiAvailable levels of yield strength (Rp0.2) for cold-formed steels
Désignation/ Designation Typen / Types
EN AISI +CP350 +CP500 +CP700 +CP900 +CP1100
1.4310 301 X X X X X
1.4301 304 X X X X X
1.4541 321 X X
1.4401 316 X X
EN 10088-2Niveaux de limite élastique (Pp0.2) et résistance à la traction à l’état d’écroui(Processus 2H)Levels of yield strength (Rp0.2) and tensile strength for cold-formed steels (production route 2H)
Finition 2HFinish 2H
Re Finition 2HFinish 2H
RmRelationsRelations
- - - - 1/16 H
+CP350 350÷500 +C700 700÷850 1/8 H
+CP500 500÷700 +C850 850÷1000 1/4 H
+CP700 700÷900 +C1000 1000÷1150 1/2 H
+CP900 900÷1100 +C1150 1150÷1300 3/4 H
+CP1100 1100÷1300 +C1300 1300÷1500 4/4 H
EN 10088-2Niveaux disponibles de limite élastique (Pr0.2) de nuances au l’état écroul (+CR)Available levels of tensile strength for cold-formed steels
Désignation / Designation Types/ Types
EN AISI +C700 +C850 +C1000 +C1150 +C1300
1.4310 301 X X X X X
1.4301 304 X X X X X
1.4541 321 X X
1.4401 316 X X
Tolérances dimensionnelles selon le norme ISO 9445. Voir le point 2.6.1// Dimensional tolerances according to ISO 9445. See point 2.6.1
2.2 / / FEUILLARDS D’ACIER INOXYDABLE LAMINES A FROID.2.2 / COLD ROLLED HARDENED STAINLESS STEELS
Réglementation applicable aux produits plats d’acier inoxydableBasic regulations applicable to stainless steel flat products
DésignationDesignation
Description / Description
EN 10088-1Liste des aciers inoxydablesList of stainless steels
EN 10088-2
Conditions techniques de livraison de toles en acier pour eviter la corrosions pour usage generalTechnical delivery conditions for sheets/plates and strips of corrosion resistant steels for general purposes
EN 10058
Barres rectangulaires d’acier laminé au chaud à usage général. Dimensions et tolérances dimensionnels et forme.Rectangular bars in hot rolled steels for general purposes. Dimensions and dimensional and shape tolerances
ISO 9445Feuillards, bandes larges, tôles et feuillards en bandes d’acier inoxydable laminées à froid et en continu.Continuously cold rolled stainless steels narrow strip, wide strip, plate/sheet and cut lengths
EN 10051
Tôles, bandes et feuillards laminés à chaud en continu, d’acier allié et non allié, non recou-verts. Tolérances dimensionnelles et formeSheets, coils and strips on continuously hot rolled stainless steels, alloyed and non-alloyed, uncoated. Dimensional and shape tolerances
EN 10048Feuillards d’acier laminés au chaud. Tolérances dimensionnelles et formeHot rolled narrow steel strips. Tolerances on dimensions and shape
PRODUITS PLATSFLAT PRODUCTS
2
2.1 / FEUILLARDS ET TÔLES2.1 / STRIPS AND SHEETS
Gamme de produitsRange of products
NuancesQuality grades
Matériel (mm) Material (mm)
Épaisseur (mm)Thickness (mm)
Largeur (mm) Width (mm)
1.4310/1.4301/1.4307/ 1.4401/1.4432/ 1.4541
Laminé à froidCold rolled
0,3 – 3 8 – 1500
1.4512/1.4016/1.4511/1.4510/1.4509
1.4021/ 1.4116
Laminé à chaudHot rolled
3 – 6 10 – 1500
Produits inoxydableStainless steel products
-
FLINSA. CATALOGUE GÉNÉRAL// GENERAL CATALOGUEFLINSA. CATALOGUE GÉNÉRAL // GENERAL CATALOGUE68 69
2.4 / PLAQUES2.4 / PLATES
EN 10058 Tableau de poids (gr/m).Table of weights (gr/m)
Largeur (mm)Width (mm)
Épaisseur (mm)Thickness (mm)
3 4 5 6 8 10 12 15
20 470 630 790 940 - - - -
30 720 950 1190 1430 1910 - - -
35 830 1110 1390 1670 2230 - - -
40 950 1270 1590 1910 2540 3180 - -
45 - 1430 1790 2150 2860 3580 - -
50 - 1590 1990 2390 3180 3980 4770 -
60 - 1910 2390 2860 3820 4770 5720 -
70 - - 2780 3340 4450 5570 6680 -
80 - - - 3820 5090 6360 7630 9420
90 - - - 4290 5720 7160 8590 10600
100 - - - 4770 6360 7950 9540 11930
Tubes de remplacement de plaquesTubes replacements of plates
NuanceQuality grades
Dimensions (mm)Dimensions (mm)
Poids (gr/m)Weights (gr/m)
1.4301 (304)
1.4307 (304L)
1.4401 (316)
1.4404 (316L)
30x10x1,20 720
40x10x1,50 1127
50x10x1,50 1360
60x12x1,50 1654
80x15x1,50 2203
Tolérances dimensionnelles selon la norme EN 10058. Voir le point 3.3 et 3.5.2.. // Dimensional tolerances according to EN 10305-5. See points 3.3 y 3.5.2.
2.3 / TÔLES2.3 / SHEETS
Tôles commerciaux disponiblesCommercial sheets available
NuancesQuality grades
Dimensions (mm)Dimensions (mm)
Épaisseur (mm)Thickness (mm)
304/304L
316/316L
1000x2000
0,5 - 3,01250x3000
1500x3000
ISO 9445 Tolérance de longeur (mm) pour bandes coupés dans bandes larges laminés à froidTolerance in length (mm) for cut lengths slit from cold rolled wide coils
Longueur specifiée (mmDefined Length (mm)
NormaleStandard
ReduiteRestricted
L ≤ 2000+5 +3
0 0
2000 < L+0,0025 L +0,0015 L
0 0
Tolérances dimensionnelles selon la norme ISO 9445. Voir le point 2.6.1 // Dimensional tolerances according to ISO 9445. See point 2.6.1
Produits inoxydableStainless steel products
-
FLINSA. CATALOGUE GÉNÉRAL// GENERAL CATALOGUEFLINSA. CATALOGUE GÉNÉRAL // GENERAL CATALOGUE70 71
2.5 / FINITION DES SURFACES.2.5 / SURFACE FINISHES
Table de finition disponibles par produits platsTable of available finishes for flat products
État de livraisonCondition
ASTM EN 10088-2DescriptionDescription
Laminé à chaudHot rolled
Nº. 1 1DLaminé à chaud, recuit et décapéHot rolled, annealed and pickled
1D -Laminé à chaud, recuit, décapé et skinpasséHot rolled, annealed, pickled and skin passed
Laminé à froidCold rolled
2D 2DLaminé à froid, recuit et décapé
Cold rolled, annealded and pickled
2B 2BLaminé à froid, recuit, décapé et léger skinpassé
Cold rolled, annealded, pickled and slightly skin passed
BA 2RLaminé à froid et recuit dans un four d’atmosphère contrôléCold rolled and annealed in controlled atmosphere furnace
ÉmerisésGrinded
Nº3 2JBrossé par bandes abrasives de grain 80 à 120
Polished with abrasive belts grain 80 to 120
Nº4Brossé par bandes abrasives de grain 150 à 400
Polished with abrasive belts grain 150 to 400
Nº6 2KSatinéSatin
HL 2JBrossé fin par bandes de grain 150 à 240
Polished hair-line with belts grain 150 to 240
SCOTCH BRITE 2JBrossé type scotch brite
Polished scotch brite type
Trempé pour lami-nageHardered by rolling
1/4 H 2H
Fini 2D avec réductions de 10 jusqu’à 45%Finish 2D with reductions from 10 to 45 %
1/2 H 2H
3/4 H 2H
4/4 H 2H
Produits inoxydableStainless steel products
-
FLINSA. CATALOGUE GÉNÉRAL// GENERAL CATALOGUEFLINSA. CATALOGUE GÉNÉRAL // GENERAL CATALOGUE72 73
ISO 9445
Tolérances (mm) d’épaisseur spécifié pour feuillards laminés à froid, bandes coupés de ces bandes, bandes larges laminés à froid obtenu dans le coupe longitudinale et feuillards en bandes obtenu de ces feuillards.Tolerances (mm) in the defined thickness for cold rolled coils, cut lengths, cold rolled wide coils and cut lengths
Épaisseur no-minale (mm)
Nominal Thickness (mm)
Tolérance normaleStandard tolerances
Tolérance Reduite(S)Restricted tolerances (S)
t ≥ t < w ≤ 1000 1000 < w ≤ 1300 1300 < w ≤ 2100 w ≤ 1000 1000 < w ≤ 1300 1300 < w ≤ 2100
- 0,30 ±0,03 - - ±0,020 -
0,30 0,50 ±0,04 ±0,04 - ±0,025 ±0,030
0,50 0,60 ±0,045 ±0,05 - ±0,030 ±0,035
0,60 0,80 ±0,05 ±0,05 - ±0,035 ±0,040
0,80 1,00 ±0,055 ±0,06 ±0,06 ±0,040 ±0,045 ±0,050
1,00 1,20 ±0,06 ±0,07 ±0,07 ±0,045 ±0,045 ±0,050
1,20 1,50 ±0,07 ±0,08 ±0,08 ±0,050 ±0,055 ±0,060
1,50 2,00 ±0,08 ±0,09 ±0,10 ±0,055 ±0,060 ±0,070
2,00 2,50 ±0,09 ±0,10 ±0,11 - - -
2,50 3,00 ±0,11 ±0,12 ±0,12 - - -
3,00 4,00 ±0,13 ±0,14 ±0,14 - - -
4,00 5,00 ±0,14 ±0,15 ±0,15 - - -
5,00 6,50 ±0,15 ±0,15 ±0,16 - - -
6,50 8,00 ±0,16 ±0,17 ±0,17 - - -
ISO 9445Tolérances (mm) de largeur pour feuillards laminés à froid et bandes de feuillards obtenu dans ces feuillards Tolerances (mm) in width for cold rolled strips and cut lengths
Épaisseur no-minale (mm)
Nominal Thickness (mm)
w ≤ 40 40 < w ≤ 125 125 < w ≤ 250 250 < w ≤ 600
t ≥ t < A* B** C*** A* B** C*** A* B** C*** A* B** C***
0,25+0,17 +0,13 +0,10 +0,20 +0,15 +0,12 +0,25 +0,20 +0,15 +0,50 +0,50 +0,40
0 0 0 0 0 0 0 0 0 0 0 0
0,25 0,50+0,20 +0,15 +0,12 +0,25 +0,20 +0,15 +0,30 +0,22 +0,17 +0,60 +0,50 +0,40
0 0 0 0 0 0 0 0 0 0 0 0
0,50 1,00+0,25 +0,22 +0,15 +0,25 +0,22 +0,17 +0,40 +0,25 +0,20 +0,70 +0,60 +0,50
0 0 0 0 0 0 0 0 0 0 0 0
1,00 1,50+0,25 +0,22 +0,15 +0,30 +0,25 +0,17 +0,50 +0,30 +0,22 +1,0 +0,70 +0,60
0 0 0 0 0 0 0 0 0 0 0 0
1,50 2,50+0,40 +0,25 +0,20 +0,60 +0,40 +0,25 +1,0 +0,80 +0,60
0 0 0 0 0 0 0 0 0
2,50 3,00+0,50 +0,30 +0,25 +0,60 +0,40 +0,25 +1,2 +1,0 +0,80
0 0 0 0 0 0 0 0 0
ISO 9445Tolérances d’épaisseur spécifié pour feuillards laminés à froid, bandes coupés de ces tôles feuillards larges, bandes larges laminé à froid obtenu dans le coupé longitudinale et feui-llards en bandes obtenu de ces feuillards.Tolerances in the defined thickness for cold rolled strips and cut lengths
Épaisseur no-minale (mm)
Nominal Thickness (mm)
w < 125 125 ≤ w < 250 250 ≤ w < 600
t ≥ t < A* B** C*** A* B** C*** A* B** C***
0,05 0,10 +0,10t ±0,06t ±0,04t +0,12t ±0,10t ±0,08t + 0,15t ±0,10t ±0,08t
0,10 0,15 +0,010 ±0,008 ±0,006 +0,015 ±0,012 ±0,008 +0,020 ±0,015 ±0,010
0,15 0,20 +0,015 ±0,010 ±0,008 +0,020 ±0,012 ±0,010 +0,025 ±0,015 ±0,012
0,20 0,25 +0,015 ±0,012 ±0,008 +0,020 ±0,015 ±0,010 +0,025 ±0,020 ±0,012
0,25 0,30 +0,017 ±0,012 ±0,009 +0,025 ±0,015 ±0,012 +0,030 ±0,020 ±0,015
0,30 0,40 +0,020 ±0,015 ±0,010 +0,025 ±0,020 ±0,012 +0,030 ±0,025 ±0,015
0,40 0,50 +0,025 ±0,020 ±0,012 +0,030 ±0,020 ±0,015 +0,035 ±0,025 ±0,018
0,50 0,60 +0,030 ±0,020 ±0,014 +0,030 ±0,025 ±0,015 +0,040 ±0,030 ±0,020
0,60 0,80 +0,030 ±0,025 ±0,015 +0,035 ±0,030 ±0,018 +0,040 ±0,035 ±0,025
0,80 1,00 +0,030 ±0,025 ±0,018 +0,040 ±0,030 ±0,020 +0,050 ±0,035 ±0,025
1,00 1,20 +0,035 ±0,030 ±0,020 +0,045 ±0,035 ±0,025 +0,050 ±0,040 ±0,030
1,20 1,50 +0,040 ±0,030 ±0,020 +0,050 ±0,035 ±0,025 +0,060 ±0,045 ±0,030
1,50 2,00 +0,050 ±0,035 ±0,025 +0,060 ±0,040 ±0,030 +0,070 ±0,050 ±0,035
2,00 2,50 +0,050 ±0,035 ±0,025 +0,070 ±0,045 ±0,030 +0,080 ±0,060 ±0,040
2,50 3,00 +0,060 ±0,045 ±0,030 +0,070 ±0,050 ±0,035 +0,090 ±0,070 ±0,045
* A Normale ** B Étroite *** C Précision // *A- Standard **B- Narrow ***C-Precision
2.6 / TOLÉRANCES2.6 / TOLERANCES
2.6.1 / TOLERANCES POUR ROULEAUX ET FEUILLARDS LAMINES A FROID2.6.1 / TOLERANCES FOR COLD ROLLED COILS AND STRIPS
Produits inoxydableStainless steel products
-
FLINSA. CATALOGUE GÉNÉRAL// GENERAL CATALOGUEFLINSA. CATALOGUE GÉNÉRAL // GENERAL CATALOGUE74 75
2.6.3 / TOLÉRANCES GÉNÉRALES DES PLAQUES.2.6.3 / TOLERANCES FOR PLATES
EN 10058 Tolérance dimensionnelle et de forme.Dimensional and shape tolerances
TypeType
RangeRange
Valeur*Valuesa
ReprésentationRepresentation
Largeur bWidth b
10 ≤ b ≤ 40 ± 0,75
40 < b ≤ 80 ± 1,00
80 < b ≤ 100 ± 1,50
100 < b ≤ 120 ± 2,00
120 < b ≤ 150 ± 2,50
Épaisseur tThickness t
t ≤ 20 ± 0,50
20 < t ≤ 40 ± 1,00
40 < t ≤ 80 ± 1,50
Rectitude qStraightness q
< 1000 mm2 q ≤ 0,40 % de L
≥ 1000 mm2 q ≤ 0,25 % de L
Manque d’équarrissage uSquareness of sides u
10 < t ≤ 25 0,50
25 < t ≤ 40 1,00
40 < t ≤ 80 1,50
(a) Les produits peuvent être livrés avec des tolérances maximales, si c’est convenu au moment de la commande(a) The products can be supplied with positive tolerance only if so agreed at the time of the bid request and order
EN 10058 Tolérances de longueursTolerances in lengths
Type de longueur* (L)Type of lenghta (L)
IntervalInterval
Limitation de l’ecartLimit deviationb
Longueurs fixes (F)Fixed lengths (F)
3000 ≤ L ≤ 13000 ± 100 mm
Longueurs exactes ( E )Exact lengths (E)
L < 6000 ± 25 mm
6000 ≤ L ≤ 13000 ± 50 mm
2.6.2 / TOLERANCES POUR FEUILLARDS ET ROULEAUX LAMINE A CHAUD2.6.2 / TOLERANCES FOR HOT ROLLED COILS AND STRIPS
EN 10051 Tolérances d’épaisseur pour langueur nominale (mm)Tolerance in thickness for nominal width (mm)
Épaisseur nomi-nales (mm)
Nominal Thickness (mm)
Tolérances normalesStandard tolerances
t > t ≤ w ≤ 1200 1200 < w ≤ 1500 1500 < w ≤ 1800 w > 1800
2,0 ± 0,17 ± 0,19 ± 0,21
2,0 2,5 ± 0,18 ± 0,21 ± 0,23 ± 0,25
2,5 3,0 ± 0,20 ± 0,22 ± 0,24 ± 0,26
3,0 4,0 ± 0,22 ± 0,24 ± 0,26 ± 0,27
4,0 5,0 ± 0,24 ± 0,26 ± 0,28 ± 0,29
5,0 6,0 ± 0,26 ± 0,28 ± 0,29 ± 0,31
6,0 8,0 ± 0,29 ± 0,30 ± 0,31 ± 0,35
EN 10048 Tolérances de largeur pour feuillards aux rives cisaillées.Tolerance in width for strips with trimmed edges
Épaisseur nominal
(mm)Nominal
Thickness (mm)
Standard tolerancesStandard tolerances
w < 80 80 ≤ w < 250 250 ≤ w < 400 400 ≤ w < 600
t > t ≤ Inf. Sup. Inf. Sup. Inf. Sup. Inf. Sup.
3,0 0 + 0,50 0 + 0,50 0 + 0,60 0 + 0,60
3,0 5,0 0 + 0,70 0 + 0,70 0 + 0,80 0 + 0,80
5,0 7,0 0 + 0,80 0 + 0,80 0 + 1,00 0 + 1,00
7,0 10,0 0 + 1,00 0 + 1,20 0 + 1,20 0 + 1,40
Produits inoxydableStainless steel products
-
FLINSA. CATALOGUE GÉNÉRAL// GENERAL CATALOGUEFLINSA. CATALOGUE GÉNÉRAL // GENERAL CATALOGUE76 77
PRODUITS TUBULAIRESTUBULAR PRODUCTS
3
Réglementation de base applicable au produits tubulaires en acier inoxydableBasic standards applicable to stainless steel tubular products
NormeStandard
DescriptionDescription
EN 10296-2Tubes d’acier soudé de section circulaire pour applications mécaniques et d’ingénierie en général. Conditions techniques de fourniture.Welded circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions
EN10305-5
Tubes d’acier pour applications de précision. Conditions techniques de fournissons. Tubes soudées et calibrées à froid de sections carré et circulaire.Steel tubes for precision applications. Technical delivery conditions. Welded and cold sized square and rectangular tubes
ISO 1127Tubes d’acier inoxydable. Dimensions, tolérances et masses conventionnelles par unité de longueur.Stainless steel tubes. Dimensions, tolerances and conventional masses per unit length
EN10219-2
Profils creux de construction soudés formés à froid en acier non alliés et à grains fins. Tolérances, dimensions et caractéristiques.Cold formed welded structural hollow sections of non-alloy and fine grain steels. Tolerances, dimen-sions and sectional properties
La qualité des materiaux disponibles pour la fabrication de tubes soudées en continuMaterial grades available for the manufacturing of continuous welded tube
GradeGrades Rp0,2 (4) mín
(N/mm²)Rm mín(N/mm²)
A80 (%) mín.Résistance à la corrosion
intergranulaireIntergranular corrosion
resistanceEN AISI L (2) T (3)
1.4301 304 195 500 40 35 Si(1)
1.4307 304L 180 470 40 35 Si
1.4401 316 205 510 40 30 Si(1)
1.4432 316L 190 490 40 30 Si
1.4541 321 200 500 35 30 Si
1.4016 430 240 430 20 18 Si(1)
1.4509 441 230 430 18 16 Si
1.4510 439 230 420 23 21 Si
1.4511 430Ti 240 430 20 18 Si
1.4512 409 210 380 25 23 No
(1) Normalement, cette condition ne respect pas l’état de sensibilité ou de soudure brut. // (1) Normally, this requirement is not complied in sensitized condition or gross welding(2) Longueur.// (2) Lengthwise(3) Transversale.// (3) Transverse(4) Limite élastique conventionnel. // (4) Conventional yield limit
Produits inoxydableStainless steel products
-
FLINSA. CATALOGUE GÉNÉRAL// GENERAL CATALOGUEFLINSA. CATALOGUE GÉNÉRAL // GENERAL CATALOGUE78 79
3.2 / TUBES CARRÉS3.2 / SQUARE TUBES
TABLEAU DE POIDS POUR LES TUBE CARRE (gr/m).Weights table of square tube (gr/m)
BxH (mm)ToléranceTolerance
Épaisseur de paroi T Wall thickness T
0,8 1 1,2 1,5 2 2,5 3 4
20 x 20 ±0,20 485 600 713 877 1138
25 x 25
±0,25
612 758 902 1114 1454
30 x 30 916 1092 1351 1770
35 x 35 1074 1282 1588 2086
40 x 40±0,30
1232 1471 1825 2402 2963
50 x 50 1548 1850 2299 3034 3753 4456
60 x 60 ±0,35 2230 2773 3666 4543 5404
70 x 70 ±0,40 3247 4298 5333 6352 8342
80 x 80 ±0,50 3721 4930 6123 7300 9606
Densité pour le calcul 7.9 gr/cm³ // Density applied in calculation 7.9 gr/cm3
3.1 / TUBES RONDS3.1 / ROUND TUBES
TABLEAU DE POIDS POUR LES TUBES RONDS (gr/m).Weights table of round tube (gr/m)
D (mm)Épaisseur de la paroi T (mm)/ Wall thickness T (mm)
0,5 0,8 1,0 1,2 1,5 2,0 2,5 3,0 4,0
8 93 143 174 203 242
10 118 183 223 262 316
12 143 222 273 322 391
14 168 262 323 381 465
15 180 282 347 411 503
16 192 302 372 441 540
20 381 472 560 689 893
23 441 546 649 800 1042
25 480 596 709 875 1142
25,4 488 606 721 890 1162
28 540 670 798 987 1291
30 580 720 858 1061 1390 1706
32 769 917 1135 1489 1830
33 794 947 1173 1539 1892
35 844 1007 1247 1638 2017
38 918 1096 1359 1787 2203
40 968 1156 1433 1886 2327 2755
43 1042 1245 1545 2035 2513 2978
44 1067 1275 1582 2085 2575 3053
45 1092 1304 1619 2134 2637 3127
48 1166 1394 1731 2283 2823 3351
50 1216 1453 1806 2383 2947 3499
50,8 1236 1477 1835 2422 2997 3559
53 1291 1543 1917 2531 3133 3723
54 1315 1573 1954 2581 3195 3797
55 1340 1602 1992 2631 3257 3872
57 1390 1662 2066 2730 3382 4021
60 1464 1751 2178 2879 3568 4244
60,3 1760 2189 2894 3586 4266 5589
63,5 2308 3053 3785 4505 5907
65 2364 3127 3878 4616 6056
73 2662 3524 4374 5212 6850
76,2 2781 3683 4573 5450 7168
89,9 3291 4363 5423 6470 8528
100 3667 4864 6050 7222 9530
101,6 3727 4944 6149 7341 9689
104 3816 5063 6298 7520 9927
Densité pour le calcul 7.9 gr/cm³ // Density applied in calculation 7.9 gr/cm3
Produits inoxydableStainless steel products
-
FLINSA. CATALOGUE GÉNÉRAL// GENERAL CATALOGUEFLINSA. CATALOGUE GÉNÉRAL // GENERAL CATALOGUE80 81
TABLEAU DE POIDS DES TUBES RECTANGULAIRES (gr/m)Weight table of rectangular tubes (gr/m)
BxH (mm)ToléranceTolerance
Épaisseur de la paroi T (mm) Wall thickness T (mm)
0,8 1,0 1,2 1,5 2,0 2,5 3,0 4,0
30 x 10±0,25
485 600 713 877 1138
30 x 20 612 758 902 1114 1454
40 x 10
±0,30
612 758 902 1114 1454
40 x 20 738 916 1092 1351 1770
40 x 30 1074 1282 1588 2086
50 x 20 1074 1282 1588 2086 2568 3034
50 x 30 1232 1471 1825 2402 2963 3508
60 x 20±0,35
1074 1282 1588 2086 2568 3034
60 x 40 1548 1850 2299 3034 3753 4456
80 x 40±0,50
2230 2773 3666 4543 5404 7078
80 x 60 3247 4298 5333 6352 8342
100 x 40±0,65
3247 4298 5333 6352 8342
100 x 60 3721 4930 6123 7300 9606
Densité pour le calcul 7.9 gr/cm³ // Density applied in calculation 7.9 gr/cm3
3.3 / TUBES RECTANGULAIRES3.3 / RECTANGULAR TUBES
Produits inoxydableStainless steel products
-
FLINSA. CATALOGUE GÉNÉRAL// GENERAL CATALOGUEFLINSA. CATALOGUE GÉNÉRAL // GENERAL CATALOGUE82 83
Finitions de surface disponibles pour les tubes carrés et rectangulaires.Available surface finishes for square and rectangular tube
FinitionFinish
DescriptionDescription
NormaleCommon
Usinage (sans cordon usiné)Machine raw (gross welding seam)
UsinéMachined
Cordon extérieur rectifiéOutside welding seam removed
SatinéSatin finish
Bandes poliBelt grinded
3.4 / FINITIONS DE SURFACE3.4 / SURFACE FINISHES
Produits inoxydableStainless steel products
-
FLINSA. CATALOGUE GÉNÉRAL// GENERAL CATALOGUEFLINSA. CATALOGUE GÉNÉRAL // GENERAL CATALOGUE84 85
3.5.2 / TOLÉRANCES DIMENSIONELLES PAR LES TUBES CARRÉS ET RECTANGULAIRES 3.5.2 / DIMENSIONAL TOLERANCES FOR SQUARE AND RECTANGULAR TUBES
EN 10305-5EN 10219-2
ISO 1127
Tolérances dimensionnelles par les tubes carrés et rectangulairesDimensional tolerances for square and rectangular
TypeType
GammeRange
ValeursValues
ReprésentationRepresentation
Épaisseur de la paroiWall thickness
T ≤ 1,5 mm ± 0,15
T > 1,5 mm± 0,1*T o ±0,35, Le plus petite ± 0,1*T or ± 0,35, the smallest
RectitudeStraightness
-- ≤ 30 mmSide ≤ 30 mm
≤ 0,0025*L
-- > 30 mmSide ≤ 30 mm
≤ 0,0015*L
CalibrageSquareness of sides
- ≤ ±1°
Torsion Twist
B ó H ≤ 30 mm ≤ 3 mm
B ó H > 30 mm ≤ B/10 ó ≤ H/10
LongueurLength
L = 6000 mm -0 + 100 mm
≤ 500 mmavec accord
As per agreement
500 - 2000 mm -0 + 3 mm
2000 - 5000 mm -0 + 5 mm
5000 - 8000 mm -0 + 10 mm
> 8000 mmavec accord
As per agreement
Hauteur du cordon de soudureT≤8mmWelding seam height (laser)T ≤ 8mm
NormalNormal
≤ 0,05T + 0,1
Laminé Rolled
0
Rayon du coinCorner radius
T ≤ 2,5 mm ≤ 1,5T
4,0 ≥ T > 2,5 mm ≤ 2,2T
ConcavitéConcavity
-Inclus dans les tolérances de B et H
Included in the tolerances of B and H
Densité pour le calcul 7.9 gr/cm³ // Density applied in calculation 7.9 gr/cm3
3.5.1 / TOLÉRANCES DIMENSIONELLES PAR LES TUBES RONDS3.5.1 / DIMENSIONAL TOLERANCES FOR ROUND TUBES
EN 10296-2ISO 1127
Tolérances dimensionelles pour tube rondDimensional tolerances for round tube
TypeType
GammeRange
ClasseClass
ValeursValues
ReprésentationRepresentation
Diamètre extérieurOutside diameter(≤168.3 mm)
Normale obtenuCommonly obtained
D3±0.75% y ≥ 0.3 mm
±0.75% and ≥ 0.3 mm
ReduiteNarrow
D4±0.5% y ≥ 0.10 mm
±0.5% and ≥ 0.10 mm
Épaisseur de la paroiWall thickness
Selon normeAccording to Standard
T3±10% y ≥ 0.20 mm
±10% and ≥ 0.20 mm
Normale obtenuCommonly obtained
T4±7.5% and ≥ 0.15 mm±7.5% and ≥ 0.15 mm
Sur demande et avec recharge
Under request and surchargeT5
±5% y ≥ 0.10 mm±5% and ≥ 0.10 mm
OvalisationOvality
Le même que le diamètre extérieurThe same than outside diameter
RectitudeStraightness
Ø≥ 33.7
NormaleNormal
≤ 0.0020·L
SpécifiéSpecified
≤ 0,0015·L
Ø≤ 33.7 -Selon accord
As per agreement
LongueurLength
NormaliséNormalized
- -0 +100 mm
VariéVaried
-Selon accord
As per agreement
ExactExact
L ≤ 6000 mm -0 +5 mm
6000 < L ≤ 12000 mm
-0 +10 mm
L > 12000 mm0 / +
Selon accordAs per agreement
Hauteur du cordon de soudureT ≤ 8mm
Welding seam heightT ≤ 8mm
Laser
NormaleNormal
≤ 0,05T+0,1 mm
LaminéRolled
0
TIGNormaleNormal
≤ 0,10T+0,3 mm
3.5 / TOLERANCES ET FINITIONS3.5 / TOLERANCES AND FINISHES
Produits inoxydableStainless steel products
-
FLINSA. CATALOGUE GÉNÉRAL // GENERAL CATALOGUE86
PROCÉDÉ ADDITIONELSADDITIONAL PROCESSES
4
Coupé sur mesure avec une scie circulaireCIRCULAR SAW BLADE CUT-TO-LENGTH
TolérancesTolerances
LongueurLength
Épaisseur de la paroiWall thickness
DiamètresOutside Diameter
TypeType
Valeur (mm)Value (mm)
Gamme (mm) Range (mm)
Gamme (mm)Range (mm)
D (mm)
Large / Standard Wide / standard
±1,00 270 - 4000
0,6 – 4,0
12 – 65
RéduiteNarrow
±0,50 30 - 3000 8 – 70
PrécisionPrecision
±0,20 30 - 2000 10 – 70
COUPÉ SUR MESURE PAR LASERLASER CUTTING AND DRILLING
TolérancesTolerances
LongueurLength
ÉpaisseurThicknesses
Gamme de diamètresDiameter Range
TypeType
Valeur (mmValue (mm)
Gamme (mm)Range (mm)
Gamme (mm) D (mm)
Large / StandardWide / standard
±0,70 5 - 3500
0,5 – 8,0 12 – 152RéduiteNarrow
±0,30 5 - 2000
PrécisionPrecision
±0,10 5 - 1000
TUBES EN BALLOT (botte cerclée)TUBE BUNDLE
CARTON PALETTECARTON ON PALET
TUBES EN BALLOT (botte cerclée) SUR PALETTETUBE BUNDLE ON PALET
FLC CONTAINER (sur demande)FLC CONTAINER (under request)
EMBALLAGESPACKAGING
FLINSA. CATALOGUE GÉNÉRAL // GENERAL CATALOGUE 87
Produits inoxydableStainless steel products
-
CATALOGUEGÉNÉRAL
CAT
ALO
GU
E G
ÉNÉR
AL
GE
NE
RA
L C
ATA
LOG
UE
FGE
N /
F00
3 /
250
DES BUREAUX CENTRAUX ET D’USINECENTRAL OFFICES AND PRODUCTION PLANT
Flejes Industriales, S.A.
Ctra. Ibi-Alicante, Km. 1,503440 - IBI (Alicante) ESPAÑA
Apdo. 51 / PO box 51
TEL / PHONE +34 96 555 29 36FAX +34 96 555 38 15
www.flinsa.com [email protected]
FEUILLARDS ET BOBINES D’ACIER AU CARBONE
TUBES D’ACIER AU CARBONE
CARBON STEEL COILS AND STRIPS
CARBON STEEL TUBES
PRODUITS INOXYDABLE
STAINLESS STEEL PRODUCTS