Transcript
Page 1: Floor Care · 2018. 7. 16. · Floor Care For use on vinyl, rubber, linoleum, marble, terrazzo & sealed floor surfaces Easy Strip™ Fast acting floor polish stripper Sure Strip™

Floor Care For use on vinyl, rubber, linoleum, marble,terrazzo & sealed floor surfaces

Easy Strip™Fast acting floor polish stripper

Sure Strip™Floor polish stripper

Enhance™Ultra high solids floor polish

MexapolHigh solids floor polish

Sus-tainMedium solids floor polish

Clean & Shine™Neutral perfumed floor maintainer

High Class™Neutral hard surface cleaner & floor maintainer

PREPARE - POLISH STRIPPING● Place wet floor caution signs. Sweep floor● Add EASY STRIP or SURE STRIP to hot water in mop bucket● Mop solution onto section of floor. Leave for five minutes● Scrub surface using floor machine and BLACK floor pad● Remove all slurry residue with wet pick-up or mop● After using EASY STRIP - providing all slurry residue is completely removed it is not necessary to rinse, but check floor is neutral● After using SURE STRIP - rinse with cold water and neutralise floor

EASY STRIP is also suitable for mop or spray stripping - refer to label

PROTECT - POLISH APPLICATION● Place wet floor caution signs. Ensure floor is clean, dry and neutral● Pour polish into bucket or tray● Place mop or applicator into polish, lightly squeeze out surplus● Alternatively, pour polish directly onto floor in a thin line● Spread polish thinly and evenly in WEST to EAST direction● Leave to dry, approximately 30 minutes● Apply a further coat of polish thinly and evenly in a NORTH to SOUTH direction● Leave a 15cm gap at floor edge● Leave to dry, approximately 30 minutes

If required further coats of polish can be applied

MAINTAIN - SPRAY CLEAN OR MOP & DRY BURNISHSPRAY CLEANING & BURNISHING● Place wet floor caution signs. Sweep floor● Add CLEAN & SHINE or HIGH CLASS to cold water in a hand spray● Spray floor lightly, approximately 1 metre in front of machine ● Burnish to a shine using high-speed floor machine and RED floor padMOP & DRY BURNISHING● Place wet floor caution signs. Sweep floor● Add CLEAN & SHINE or HIGH CLASS to warm water in mop bucket● Mop floor with solution. Allow to dry● Dry burnish using high-speed floor machine and WHITE floor pad

For more information refer to EVANS FLOOR & CARPET CARE BROCHURE

When stripping polish from a floor it is advisable to comply with good safe working practice and avoid standing on the wet solution.

®

®

EVANS VANODINE INTERNATIONAL PLCBrierley Road, Walton Summit,Preston PR5 8AH EnglandTel: +44 (0)1772 322200 Fax: +44 (0)1772 626000Email: [email protected] [email protected]: www.evansvanodine.co.uk

● ALWAYS READ, UNDERSTAND & ADHERE TO LABEL INSTRUCTIONS.

● ALWAYS WEAR PROTECTIVE SAFETY WEAR WHEN RECOMMENDED.

● ALWAYS CHECK MACHINE CABLES & PLUG BEFORE USE.

Distributed by:

Top Related