![Page 1: Forming Conducting Polymers Utilising Room Temperature Ionic Liquids PhD student: Lavinia Astratine Supervisors: Dr. Anthony Betts & Prof. John Cassidy](https://reader035.vdocument.in/reader035/viewer/2022062423/56649cc15503460f94988a14/html5/thumbnails/1.jpg)
Forming Conducting Polymers Utilising Room Temperature Ionic
Liquids
PhD student: Lavinia Astratine
Supervisors:Dr. Anthony Betts & Prof. John Cassidy (DIT) Prof. Edmond Magner (MSSI, Limerick)
![Page 2: Forming Conducting Polymers Utilising Room Temperature Ionic Liquids PhD student: Lavinia Astratine Supervisors: Dr. Anthony Betts & Prof. John Cassidy](https://reader035.vdocument.in/reader035/viewer/2022062423/56649cc15503460f94988a14/html5/thumbnails/2.jpg)
• 1. Concept 1. Concept • 2. Objectives2. Objectives • 3. Lab Work3. Lab Work
• 4.Other polymers: polythiophene 4.Other polymers: polythiophene & Ionic Liquids& Ionic Liquids
• 5.Future work5.Future work
![Page 3: Forming Conducting Polymers Utilising Room Temperature Ionic Liquids PhD student: Lavinia Astratine Supervisors: Dr. Anthony Betts & Prof. John Cassidy](https://reader035.vdocument.in/reader035/viewer/2022062423/56649cc15503460f94988a14/html5/thumbnails/3.jpg)
1. Concept
• The aim of this project is to use conducting polymers (CPs), in conjunction with Room Temperature Ionic Liquids (RTILs), to produce electrochromic films.
• Such films, which change colour in response to electrical potential changes, could be used in electronic display devices and in light and energy-control applications (eg. smart windows which control light transmittance).
![Page 4: Forming Conducting Polymers Utilising Room Temperature Ionic Liquids PhD student: Lavinia Astratine Supervisors: Dr. Anthony Betts & Prof. John Cassidy](https://reader035.vdocument.in/reader035/viewer/2022062423/56649cc15503460f94988a14/html5/thumbnails/4.jpg)
• Production of improved electrochromic devices,
using a more environmentally-friendly “Green Chemistry” approach is a desirable goal.
• Conducting polymers (CPs, such as polypyrrole, polythiophene, polyaniline and/or their derivatives) have been studied extensively.
A promising CP for electrochromic applications is polypyrrole
(PPy).
2. Objectives2. Objectives
![Page 5: Forming Conducting Polymers Utilising Room Temperature Ionic Liquids PhD student: Lavinia Astratine Supervisors: Dr. Anthony Betts & Prof. John Cassidy](https://reader035.vdocument.in/reader035/viewer/2022062423/56649cc15503460f94988a14/html5/thumbnails/5.jpg)
Characteristics of polypyrrole:
• Thin films of polypyrrole are yellow in the undoped insulating state and black in the doped conductive state
• Electrochemical degradation has been reported in many studies
• The electrode potentialelectrode potential applied has been found to influence greatly the degradation process (electrode
potential limit 0.6 V vs. Ag/AgCl)
• Polypyrrole is a quite labile electrode material that undergoes a relatively fast electrochemical degradation, at least in aqueous solutions
Electrochimica Acta 52 (2007) 4784–4791
![Page 6: Forming Conducting Polymers Utilising Room Temperature Ionic Liquids PhD student: Lavinia Astratine Supervisors: Dr. Anthony Betts & Prof. John Cassidy](https://reader035.vdocument.in/reader035/viewer/2022062423/56649cc15503460f94988a14/html5/thumbnails/6.jpg)
3. Lab Work Method used: Cyclic Voltammetry
• a) Form PPy films using organic solvents as Electrolyte ExperimentalExperimental set up Working Electrode (WE): Pt electrode (diameter 2mm) Counter Electrode (CE): Silver Wire Reference Electrode (RE): saturated Ag/AgCl Pyrrole used for synthesis of PPy films was purified by distillation
and kept refrigerated in the dark.
Monomer solution: 0.1 M Pyrrole and 0.1 M LiClO4 and H2O
Electrolyte solution: 0.1 M LiClO4 and H2O
![Page 7: Forming Conducting Polymers Utilising Room Temperature Ionic Liquids PhD student: Lavinia Astratine Supervisors: Dr. Anthony Betts & Prof. John Cassidy](https://reader035.vdocument.in/reader035/viewer/2022062423/56649cc15503460f94988a14/html5/thumbnails/7.jpg)
Results and DiscussionResults and Discussion
→Potential range:
-1V to +0.8V
→ After 3 sweeps a
yellow film was
deposited on the
electrode surface
![Page 8: Forming Conducting Polymers Utilising Room Temperature Ionic Liquids PhD student: Lavinia Astratine Supervisors: Dr. Anthony Betts & Prof. John Cassidy](https://reader035.vdocument.in/reader035/viewer/2022062423/56649cc15503460f94988a14/html5/thumbnails/8.jpg)
• In order to change the
polymer colour the electrode was placed in electrolyte solution
• Potential range:
-0.4V to +0.5V
• CV in electrolyte for
10 cycles
• The polymer changed
colour to blue
![Page 9: Forming Conducting Polymers Utilising Room Temperature Ionic Liquids PhD student: Lavinia Astratine Supervisors: Dr. Anthony Betts & Prof. John Cassidy](https://reader035.vdocument.in/reader035/viewer/2022062423/56649cc15503460f94988a14/html5/thumbnails/9.jpg)
• b) Form PPy on FTO glass (WE), [0.5cmx3cm]
Monomer solution (deoxygenated
for 10 minutes):
0.1 M Py, 0.1 M LiClO4, H2O Electrolyte solution: 0.1 M LiClO4, H2O Potential range: -0.9 V to 1.5 VRun for 6 sweeps→ Results in a black oxidized
film, which is unstable→ Polypyrrole was overoxidized
![Page 10: Forming Conducting Polymers Utilising Room Temperature Ionic Liquids PhD student: Lavinia Astratine Supervisors: Dr. Anthony Betts & Prof. John Cassidy](https://reader035.vdocument.in/reader035/viewer/2022062423/56649cc15503460f94988a14/html5/thumbnails/10.jpg)
Observations:
• PPy is oxidizing at ca. 0.6V. From 0.55V on, the current increases with each potential
sweep.
• No colour change of the polymer was observed on the FTO glass.
• Probably 1 or 2 scans are enough in the region where the pyrrole starts to be oxidized (0.95 V).
• The results are better with FTO glass when the monomer solution is degassed before starting polymer formation.
![Page 11: Forming Conducting Polymers Utilising Room Temperature Ionic Liquids PhD student: Lavinia Astratine Supervisors: Dr. Anthony Betts & Prof. John Cassidy](https://reader035.vdocument.in/reader035/viewer/2022062423/56649cc15503460f94988a14/html5/thumbnails/11.jpg)
4.Other polymers: polythiophene Combines the flexibility, elasticity and malleability
of plastics + electrical conductivity + also often exhibit colour (polychromism) as electrochromic materials
Ionic Liquids ‘Green SolventsGreen Solvents’• Ionic liquids (ILs) are room temperature molten
salts, composed mostly of organic ions that can undergo almost unlimited structural variations
• ILs which function at room temperature, the most desirable operational temperature range, are termed “Room Temperature Ionic Liquids”, RTILs
![Page 12: Forming Conducting Polymers Utilising Room Temperature Ionic Liquids PhD student: Lavinia Astratine Supervisors: Dr. Anthony Betts & Prof. John Cassidy](https://reader035.vdocument.in/reader035/viewer/2022062423/56649cc15503460f94988a14/html5/thumbnails/12.jpg)
• Examples include 1-butyl-3-methylimidazolium
hexafluorophosphate (BMIM PF6) and its borate counterpart (BMIM.BF4)
![Page 13: Forming Conducting Polymers Utilising Room Temperature Ionic Liquids PhD student: Lavinia Astratine Supervisors: Dr. Anthony Betts & Prof. John Cassidy](https://reader035.vdocument.in/reader035/viewer/2022062423/56649cc15503460f94988a14/html5/thumbnails/13.jpg)
WE: Pt electrode CE: Pt coil Monomer Solution:RE: Pt wire Polymerization range: -1 V to +1 V
Colours of the film: yellow→orange→red→Black
Making polymers in ionic liquids
25cycles
0.1 M Pyrrole &BMIM PF6
![Page 14: Forming Conducting Polymers Utilising Room Temperature Ionic Liquids PhD student: Lavinia Astratine Supervisors: Dr. Anthony Betts & Prof. John Cassidy](https://reader035.vdocument.in/reader035/viewer/2022062423/56649cc15503460f94988a14/html5/thumbnails/14.jpg)
WE: FTO glass (3cm x 0.5mm) Monomer Solution:CE: Pt coilRE: Pt wire
Polymerization range: -1 V to +1 V
Colours of the film: yellow→light Brown→Brown→Black
0.1 M Pyrrole &BMIM PF6
16 cycles
![Page 15: Forming Conducting Polymers Utilising Room Temperature Ionic Liquids PhD student: Lavinia Astratine Supervisors: Dr. Anthony Betts & Prof. John Cassidy](https://reader035.vdocument.in/reader035/viewer/2022062423/56649cc15503460f94988a14/html5/thumbnails/15.jpg)
5. Future work
• Combine conducting polymers (pyrrole, thiophene) with other RTILs such as [ChCl][EG], [BMIM][CF3SO3], [Py][CF3SO3] in order to get different colours during electropolymerization on optically transparent FTO and Au-sputtered glass substrates.
• Conduct spectroelectrochemical studies of the polymer films, in order to detect colour changes in situ
• Gain insight into the mechanisms of electrochromism
• Construct simple Proof of Concept Device/Prototype illustrating potential of technology and transfer technology
![Page 16: Forming Conducting Polymers Utilising Room Temperature Ionic Liquids PhD student: Lavinia Astratine Supervisors: Dr. Anthony Betts & Prof. John Cassidy](https://reader035.vdocument.in/reader035/viewer/2022062423/56649cc15503460f94988a14/html5/thumbnails/16.jpg)
Papers
• Electrochimica Acta 52 (2007) 4784–4791, A.Brazier et al.• Polymer Degradation and Stability 75 (2002) 255–258,
R. Mazeikiene, A. Malinauskas• Synthetic Metals 157 (2007) 485-491, A. Alumaa et al.• Electrochimica Acta, Vol.42,No.2,pp. 203-210, 1997,
Yongfang Li• Journal of Electroanalytical Chemistry 618 (2008) 87–93, by
D. Asil et al.• Nature Materials, 8, (2009), 621-629, M. Armand, D.R.
MacFarlane, H. Ohno and B. Scrosati• Polymer 45(2004) 1447-1453, J.M. Pringle et al.
![Page 17: Forming Conducting Polymers Utilising Room Temperature Ionic Liquids PhD student: Lavinia Astratine Supervisors: Dr. Anthony Betts & Prof. John Cassidy](https://reader035.vdocument.in/reader035/viewer/2022062423/56649cc15503460f94988a14/html5/thumbnails/17.jpg)
Aknowledgements
- Dr. Anthony Betts & Prof. John Cassidy (DIT)
- Prof. Edmond Magner (MSSI, Limerick)
- Edmond Magner Research Group (MSSI,Limerick)
Thank youfor your attention!