Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
3.1 Patch Fitting Price List3.4 Door Stops3.5 Pivot Poles3.6 Austvision Frameless Glass Pivot Door Spider Fittings3.7 Austvision 2 Way & 4 Way Spider Fittings3.9 Electric Locks3.10 Patch Locks3.13 Security Patch Locks3.14 Sliding Door Privacy Latch & Lock3.15 Lever Locks & Latch Sets3.16 Metro Door Rails & Accessories3.17 Austvision Door Rails3.18 Metro Floor Springs & Components3.19 Concealed Overhead Closers & Geze Floor Spring3.20 Geze Floor Springs3.21 Pull Handles3.25 Channel Sections3.26 Door Seals & Decal Vision Disc’s3.27 Patch Fitting Application Guide3.28 Patch Fitting Glass Preparation Drawings3.31 Pivot Pole & Spider Pivot Glass Preparation Drawings3.32 Spider Fitting Glass Preparation Drawings3.39 341.1 Patch Lock & 456 Profile Plunger Patch Lock Glass Preparation Drawing3.40 MP100, MP200 & MP220 Glass Preparation Drawings3.41 MP300 & MP320 Glass Preparation Drawings3.42 MP3570 Glass Preparation Drawing3.43 MP3582 Glass Preparation Drawing3.44 Sliding Door Latch/Lock/Flush Pull & Lever Lockset/Latch Set Glass Preparation Drawings3.45 Metro Door Rail Installation Details3.46 Austvision Door Rail Installation Details3.47 Metro Floor Spring Installation Details3.48 Metro COC Installation Details3.49 Geze GTS500 Floor Spring Dimensions3.50 Geze GTS550NV Floor Spring Dimensions
Frameless Glass Commercial Hardware Index
3.0
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.1
Price List
All prices exclude GST
Patch Fittings suitable for 10mm & 12mm glass thickness
PRODUCT CODE DESCRIPTION NA SSS OR PSS
POWDER COAT*
MP24 TOP PIVOTwith mounting plate -
11.33
SSSonly
-
MP25 TOP PIVOTwith M8 threaded rod, washer & nut 17.63 - -
MP34
OVERPANEL TO WALLPATCH FITTING
with top pivot & wall bracket
(See page 3.28 for glass preparation)
101.88 105.54 105.54
MP34-180L180º OVERPANEL TO WALL OFFSET PATCH FITTING
Left & Right Handed
(See page 3.28 for glass preparation)
POA
Please check glass preparation & available finishes prior to ordering
NSIMP34-180R
MP40OVERPANEL TO SIDE PANEL PATCH
FITTING WITH TOP PIVOT
(See page 3.28 for glass preparation)
101.88 105.54 105.54
MP40-180L 180º OVERPANEL TO SIDE PANEL OFFSET PATCH FITTING
Left & Right Handed
(See page 3.29 for glass preparation)
POA
Please check glass preparation & available finishes prior to ordering
NSIMP40-180R
* Powder Coat colour as per standard range stated on page 1.23POA - Price On Application
NSI = Non Stock Item with 2-3 day lead-time into store + delivery
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.2
Price List
All prices exclude GST
Patch Fittings suitable for 10mm & 12mm glass thickness
PRODUCT CODE DESCRIPTION NA SSS OR PSS
POWDER COAT*
MP41-L OVERPANEL TO SIDE PANELPATCH FITTING
with fin mounting patch fitting & top pivotLeft & Right Handed
(See page 3.30 for glass preparation)
206.22 210.19 210.19
MP41-R
MP20TOP PATCH FITTINGfor use with fittings above
(See page 3.28 for glass preparation)
65.25 68.22 68.22
MP20-180L 180º TOP PATCH FITTING
Left & Right Handed
(See page 3.28 for glass preparation)
POA
Please check glass preparation & available finishes prior to ordering
NSIMP20-180R
MP22TOP PATCH FITTINGfor overhead transom closer
(See page 3.28 for glass preparation)
95.00 97.78 97.78
MP61OVERPANEL TO SIDE PANEL
OFFSET PATCH FITTING
(See page 3.30 for glass preparation)
92.56 95.95 95.95
* Powder Coat colour as per standard range stated on page 1.23POA - Price On Application
NSI = Non Stock Item with 1-2 day lead-time into store + delivery
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.3
Price List
All prices exclude GST
Patch Fittings suitable for 10mm & 12mm glass thickness
PRODUCT CODE DESCRIPTION NA SSS OR PSS
POWDER COAT*
MP70OVERPANEL PATCH FITTING
with two optional stops to suit double doors
(See page 3.30 for glass preparation)
66.16 69.37 69.37
MP28 TRANSOM MOuNT STOPfor single door 14.65 - -
MP10BOTTOM PATCH FITTING
For use with floorsprings, & pivot below
(See page 3.28 for glass preparation)
65.25 68.22 68.22
MP10-180L 180º BOTTOM PATCH FITTINGfor use with floorsprings, & pivot below
Left & Right Handed
(See page 3.28 for glass preparation)
POA
Please check glass preparation & available finishes prior to ordering
NSIMP10-180R
MP26-1STANDARD FLOOR PIVOT
Max. door weight 200kg
Please NoteClearances shown are to the top of the fixing plate, please add the appropriate thickness if this wont
be recessed.
5.5mm clearanceunder door
-33.93
SSSOnly
-
MP26-211mm
clearanceunder door
- -
MP26P5 PACkERS FORSTANDARD FLOOR PIVOT
5mm & 10mm Thick
5mm 17.50
MP26P10 10mm 22.50
* Powder Coat colour as per standard range stated on page 1.23POA - Price On Application
NSI = Non Stock Item with 1-2 day lead-time into store + delivery
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.4
Price List
All prices exclude GST
Door Stops
PRODUCT CODE DESCRIPTIONSatin
Chrome Finish
Polished Chrome Finish
MP32-1FLOOR MOuNT STOP
Cylinder Shape29.53 29.53
MP32-2FLOOR MOuNT STOP
Quarter Sphere Shape4.59 4.59
MP32-2SFLOOR MOuNT STOP SPACER
To suit MP32-2
3.44 -
MP32-3FLOOR MOuNT STOP
Quarter Sphere Shape7.65 7.65
MP32-4FLOOR MOuNT STOP
Triangular Shape7.65 7.65
MP32-5WALL MOuNT STOP
Cylinder Shape11.48 -
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.5
Price List
All prices exclude GST
Pivot Poles for 10mm & 12mm Glass Thickness (See page 3.31 for installation details)PRODUCT CODE DESCRIPTION 316 SSS
MPP25METRO PIVOT POLE INSERT FOR MPP20
Ceiling Mounted42.89
MPP34 METRO OVERPANELPIVOT POLE INSERT TO SuIT MPP20 179.49
MPP40 METRO OVERPANEL TO SIDE PANELPIVOT POLE INSERT TO SuIT MPP20 328.97
MPP60 METRO OVERPANEL TO SIDE PANELPIVOT POLE ACCESSORy BRACkET 179.49
MPP20 METRO TOP PIVOT POLE 328.97
MPP10 METRO BOTTOM PIVOT POLE 328.97
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.6
Price List
All prices exclude GST
Austvision Door Spider Fittings in 316 Satin Stainless Steel (See page 3.31 for glass preparation)
PRODUCT CODE DESCRIPTION M8 Csk316 SSS
483 Transom Panel Pivot Door Spider
POA
NSI
452 Top Pivot Door Spider
485 Transom Spider Door Stop
451 Bottom Pivot Door SpiderUsed with floor spring or pivot
POA - Price On Application NSI - Non Stock Item with 2-3 day lead-time into store + delivery316 grade polished stainless steel finish also available
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.7
Price List
All prices exclude GST
Austvision Spider Fittings in 316 Satin Stainless Steel
PRODUCT CODE DESCRIPTION M10 Csk 32/22-22N 32/22-37N
445/44 WAy GLASS CONNECTOR
(See page 3.32 for dimensions & glass preparation)
POA
445/4/2 2 WAy 1 SIDEGLASS CONNECTOR
(See page 3.33 forglass preparation)
WithBackplate
445/4/2-WB Without Backplate
445/4/2y2 WAy GLASS CONNECTOR
(See page 3.34 for dimensions & glass preparation)
445/4/1y 2 WAy 1 ARMGLASS CONNECTOR
(See page 3.34 fordimensions & glass preparation)
WithBackplate
445/4/1y-WB Without Backplate
445/22 WAy GLASS CONNECTOR
(See page 3.35 for dimensions & glass preparation)
M10CD M10 CSk OuTER DISC (Ø50x6)
316 grade polished stainless steel finish also availableOther spider fittings available on request POA - Price On Application
The images above are only a representation, please see the referenced pages for detailsDepending on quantity ordered the above items can have a lead-time of up to 2 weeks into store + delivery
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.8
Price List
All prices exclude GST
Austvision Spider Fittings in 316 Satin Stainless Steel
PRODUCT CODE DESCRIPTION M10 Csk 32/22-22N 32/22-37N
445/2/1 2 WAy 1 ARMGLASS CONNECTOR
(See page 3.35 fordimensions & glass preparation)
WithBackplate
POA
445/2/1-WB Without Backplate
446/4M4 WAy GLASS CONNECTOR
(See page 3.36 for dimensions & glass preparation)
446/2M2 WAy GLASS CONNECTOR
(See page 3.36 for dimensions & glass preparation)
446/2M/11 WAy MODIFIED 446/2
(See page 3.36 for dimensions & glass preparation)
446/4M/904 WAy GLASS CONNECTOR 90º
(See page 3.37 for dimensions & glass preparation)
443/44 WAy GLASS CONNECTOR FOR SMALL
ELEVATIONS
(See page 3.38 for dimensions & glass preparation)
M10CDM10 CSk INNER & OuTER DISC
(Ø50x6)
316 grade polished stainless steel finish also availableOther spider fittings available on request POA - Price On Application
The images above are only a representation, please see the referenced pages for detailsDepending on quantity ordered the above items can have a lead-time of up to 2 weeks into store + delivery
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.9
Price List
All prices exclude GST
Electric LatchesPRODUCT CODE DESCRIPTION PRICE
MES8070
ELECTRIC DOOR LATCH FOR12MM FRAMELESS GLASS
Designed for use with 90º one way opening 12mm toughened glass doors.
It has a unobstructive, ultra-slim design that will allow installation in very restricted amounts of space, particulary on the top of door frames.
To insure proper operation, please make sure that clearance “G” shown should be no more
than 5mm.
Power Input: 12VDC/250mA(Note: There is no polarity on power input)
Cutout size for frame and mounting instructions included with each latch.
Supplied with mounting brackets for metallic or aluminium door frame.
POA
NSI
MES145
ELECTRIC DOOR LATCH FOR 12MM FRAMELESS GLASS
DOORS TO SIDE OR OVERPANELS
Strike & housing for 12mm toughened glass doors and side or overpanels. Extruded Aluminium Housing with Adhesive glue
included.
Electric strike is released when power is applied. The strike will lock when the door
closes and the mating component engages with the jaw of the strike.
Power Input: 12VDC/195mA
Fail unlocked
Easy to install, mounting fixtures are required. Simply affix with glue provided.
Can be mounted independent of position.
Minimum Door Gap = 6mm
POA - Price On Application NSI - Non Stock Item
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.9A
Price List
All prices exclude GST
Electric StrikesPRODUCT CODE DESCRIPTION PRICE
MES1000
ELECTRIC DOOR STRIkE
• Power Input: 12VDC/200mA
• Simple Fail Safe/Fail Secure interchange, no loose pins
• Weather resistant
• Predrilled for extension lips
• Superior holding strength
• 4 Hour fire rated
• Mounting kit included
To reconfigure the door strike simply remove the springscrew and place the barbell as shown, replace the springscrew.
POA
NSI
POA - Price On Application NSI - Non Stock Item
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
PRODUCT CODE DESCRIPTION PRICE
MES2002
(unmonitored)
MuLTIFuNCTIONELECTRIC DOOR STRIkE
• 12V & 24V DC Dual Voltage Continously Rated Coil
• Fully monitored including “strike securely installed within door frame” (anti-tamper)
• Simple Fail Safe/Fail Secure interchange, no loose pins
• Predrilled for extension lips
• Superior holding strength
• 4 Hour fire rated
• Mounting kit included
To reconfigure the door strike loosen the two screws and rotate the “Capstan” with the capstan tool in the required direction.
POA
NSI
MES2008
(Monitored)
Drop Bolt Size210mm L x 25mm W x 3-35mm H
Lock Bolt Head SizeDiameter : 12.7mm Depth: 14.5mm
MDB2654
ELECTRIC DROP BOLT
• Internal IC circuits to protect drop bolt head from damage
• Power to Lock (std) & Power to Open (on request)
• Auto Lock Function• Low Power Consumption• Built-In metal oxide varistor
(MOV) for surge protection• Time delay set at 0/3/6/10 sec• Anodised Aluminium Body• 12VDC
MDBP2655
DROP BOLT kEEPER PATCH WITH ANTI-TAMPER
GLASS HOuSING
Available in PSS Only
Specify left or right hand
Frameless Glass Commercial Hardware
3.9B
Price List
All prices exclude GST
Electric Strikes
POA - Price On Application NSI - Non Stock Item
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
PRODUCT CODE DESCRIPTION PRICE
Magnet Size238mm L x 48mm W x 25mm H
Armature Plate Size185mm L x 38mm W x 12mm H
MEML2600
ELECTROMAGNETIC LOCk
• 250-280kg single door
• Surface mount, mini type
• Dual Voltage 12/24VDC, 490/245mA
• Lock Status Sensor & LED indicator
• Power Off to release door
• Built-In metal oxide varistor (MOV) for surge protection
• Satin anodized aluminium housing and zinc plated electromagnetic lock body
POA
NSI
MEML2618
GLASS DOOR BRACkET FOR
ELECTROMAGNETIC LOCk
• This product uses a u channel housing to attach the armature plate to the glass door.
• Adjustable to suit 12mm, 10mm & 8mm Glass Thickness
Frameless Glass Commercial Hardware
3.9C
Price List
All prices exclude GST
Electric Strikes
POA - Price On Application NSI - Non Stock Item
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.10
Price List
All prices exclude GST
Patch Locks
PRODUCT CODE DESCRIPTION NA SSS or Similar PSS
374
SLIDE-ON PATCH BOLT
No glass cut-out required
Specify 10mm or 12mm glass
POA - -
343.1
SLIDE-ON PATCH LOCk
No glass cut-out required
Specify 10mm or 12mm glass
Complete with single sidedcylinder & keeper plate
POA - -
342.1
PATCH LOCk
Glass cut-out required
Specify 10mm or 12mm glass
Complete with cylinder/snib & keeper plate
(See page 3.39 for glass preparation)
POA
NSI-
456
PROFILE PLuNGER LOCk
Glass cut-out required
Specify 10mm or 12mm glass
(See page 3.39 for glass preparation)
-POA
NSI
For locks specify cylinder type as follows: DC - Double Cylinder CT - Cylinder/Turn kA - keyed Alike kS - keyed SeperatelyPOA - Price On Application
NSI - Non Stock Item with lead-time of 2-3 days into store + delivery
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.11
Price List
All prices exclude GST
Patch Locks suitable for 10mm & 12mm glass thickness
PRODUCT CODE DESCRIPTION NA SSS PSS
MP100
BOTTOM PATCH LOCk
Includes cylinder & keeper
(See page 3.40 for glass preparation)
155.91 159.11 159.11
Mk240MP100/200 kEEPER PLATE
For Transom, Mullion or GroundInstallations with MP100 & MP200
- 14.65 -
MP200
CENTRE PATCH LOCk
Includes cylinders
(See page 3.40 for glass preparation)
155.91 159.11 159.11
MP220
CENTRE PATCH LOCk kEEPER
for MP200
(See page 3.40 for glass preparation)
71.25 74.45 74.45
For locks specify cylinder type as follows: DC - Double Cylinder CT - Cylinder/Turn kA - keyed Alike kS - keyed Seperately
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.12
Price List
All prices exclude GST
Patch Locks suitable for 10mm & 12mm glass thickness
PRODUCT CODE DESCRIPTION NA or Mill SSS PSS
MP300BOTTOM OR CENTRE PATCH LOCk
Includes cylinders & long throw mortice lock210mm x 64mm with throw centre of 112.5mm
(See page 3.41 for glass preparation)
- 250.00 250.00
MP300HSLIDING DOOR PATCH LOCkIncludes cylinders & hook mortice lock(See page 3.41 for glass preparation)
- 300.00 300.00
MP300LEXIT LEVER CENTRE PATCH LOCk
Includes cylinders & mortice lockPlease specify handing & glass thickness
(See page 3.41 for glass preparation)
- 618.95 618.95
MP320CENTRE PATCH kEEPER
For MP300-1 & MP300L210mm x 64mm
(See page 3.41 for glass preparation)
- 130.97 130.97
MP320HSLIDING DOOR PATCH kEEPER
For MP300H(See page 3.41 for glass preparation)
- 250.00 250.00
Mk590-HWALL MOuNT STRIkE BOX
(Image is only a representation)84.73
MP100F
SECuRITy PATCH LOCk
Specify left or right hand, open in or out &glass thickness 10mm, 12mm or 15mm
(See page 3.42 for glass preparation)
POA
NSI
MP100k
Centre Patch keeper
for MP100F Security Patch Lock
(See page 3.42 for glass preparation)
MP100SP Strike Plate
For locks specify cylinder type as follows: DC - Double Cylinder CT - Cylinder Turn kA - keyed Alike kS - keyed SeperatelyPOA - Price On Application
NSI - Non Stock Item with lead-time of 2-3 days into store + delivery
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.13
Price List
All prices exclude GST
Security Patch Locks suitable for 10 or 12mm glass thickness (See page 3.43 for glass preparation)PRODUCT CODE DESCRIPTION SSS PSS
MP3582A
SECuRITy PATCH LOCk
Cylinder Outside, Snib InsideHandles both sides
Specify left or right hand, open in or out &glass thickness 10mm, 12mm or 15mm
871.68 1002.43
MP3582B
SECuRITy PATCH LOCk
Cylinder Outside, Handle Inside
Specify left or right hand, open in or out &glass thickness 10mm, 12mm or 15mm
730.65 837.86
MP3582C
SECuRITy PATCH LOCk
Cylinder Outside, Snib Inside & No Handles
Specify left or right hand, open in or out &glass thickness 10mm, 12mm or 15mm
582.87 670.70
MP3582D
SECuRITy PATCH LOCk
Cylinder & Handles Inside & Outside
Specify left or right hand, open in or out &glass thickness 10mm, 12mm or 15mm
883.97 1016.57
MP3582E
SECuRITy PATCH LOCk
Cylinder Outside & Handles Both Sides
Specify left or right hand, open in or out &glass thickness 10mm, 12mm or 15mm
MP3582k SECuRITy PATCH LOCk kEEPER 506.27 582.21
MP3582SP STRIkE PLATE 42.97 49.67For locks specify cylinder type as follows: DC - Double Cylinder CT - Cylinder Turn kA - keyed Alike kS - keyed Seperately
Due to the above items being made to order the lead-time can be up to 3 days + delivery
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.14
Price List
All prices exclude GST
Security/Sliding Patch Locks/Latches & Flush/Finger Pulls suitable for 10mm & 12mm glass thickness
PRODUCT CODE DESCRIPTION NA
MSL-1
SLIDING DOOR PRIVACy LATCHSnib Both Sides
Specify left or right hand, inside/outside &glass thickness 10mm or 12mm
(See page 3.44 for glass preparation)
POA
NSI
MSL-2
SLIDING DOOR PRIVACy LATCHSnib One Side
Specify left or right hand, inside/outside &glass thickness 10mm or 12mm
(See page 3.44 for glass preparation)
MSL-3
SLIDING DOOR LOCk
Dimensions are the same asthat shown for MSL-1/2 above
(See page 3.44 for glass preparation)
SDFP70 FP150
SDFP70
SLIDING DOOR FINGER PuLL
70mm Diameter
Suitable for 10mm or 12mm Glass55mm Diameter Hole for Glass Preparation
85.00
SSS/PSS
FP150
SLIDING DOOR FLuSH PuLL
Handle with Ring Pull for Cavity Installation150mm x 70mm x 36mm
Specify glass thickness 10mm or 12mm(See page 3.44 for glass preparation)
POA
SSS
NSI
For locks specify cylinder type as follows: DC - Double Cylinder CT - Cylinder Turn kA - keyed Alike kS - keyed SeperatelyPOA - Price On Application
NSI - Non Stock Item with lead-time of 1-2 weeks from following Thursday of order date + delivery
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Commercial Hardware
3.15
Price List
All prices exclude GST
Lever Locks and Latch Sets suitable for 10mm & 12mm glass thickness (See page 3.44 for glass prep)
PRODUCT CODE DESCRIPTION SSS/PSS
LLJ-01LEVER LOCkSET
Locking to timber or aluminium jamb230.37
LLG-02LEVER LOCkSET
Locking to glass sidelite230.37
LLJ-03LEVER LATCHSET
Latching to timber or aluminium jamb187.77
LLG-04LEVER LATCHSET
Latching to glass sidelite187.77
LSG-08STRIkE BOX
For glass sidelite117.79
LSJ-09STRIkE PLATE
For aluminium or timber jambs16.03
DC110 DOuBLE CyLINDERS (EuRO TyPE) 34.19
CT110 CyLINDER AND TuRN (EuRO TyPE) 42.74
For locks specify cylinder type as follows: DC - Double Cylinder CT - Cylinder Turn kA - keyed Alike kS - keyed Seperately
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.16
Price List
All prices exclude GST
Metro Door Rails & Accessories for 10mm/12mm glass thickness (See page 3.45 for glass prep, etc.)
PRODUCT CODE DESCRIPTIONRails up to 1000mm
NA SSS or PSS
Powder Coat *
MR10 BOTTOM PIVOTING RAIL - NON LOCkING 233.17 315.32 255.37MR20 TOP PIVOTING RAIL - NON LOCkING 233.17 315.32 255.37MR22 TOP PIVOTING RAIL - NON LOCkING FOR COC 270.93 353.07 293.13MR30 BOTTOM PIVOTING RAIL - LOCkING 397.48 479.63 419.68MR40 TOP PIVOTING RAIL - LOCkING 397.48 479.63 419.68MR42 TOP PIVOTING RAIL - LOCkING FOR COC 435.24 517.39 457.44MR50 BOTTOM SLIDING RAIL - NON LOCkING 187.86 270.91 210.07MR60 TOP SLIDING RAIL - NON LOCkING 187.86 270.91 210.07MR70 BOTTOM SLIDING RAIL - LOCkING 354.86 433.01 377.58MR80 SIDE PANEL RAIL 187.86 270.91 210.07MRX EXTRA PER MM OVER 1000MM 0.19 0.29 0.19
15MM DOOR RAILS ALSO AVAILABLE - ADD $45 TO ABOVE PRICESPLEASE NOTE
• Specify glass thickness & when ordering locking rails please state cylinder type:DC - Double Cylinder SC - Single Cylinder CT - Cylinder Turn kA - keyed Alike kS - keyed Seperately
• Rails over 1200mm available as a special with lead-time of 1-2 weeks
PRODUCT CODE DESCRIPTION PRICE
Mk590 GROuND kEEPER 24.23
MRGFLOOR GuIDE FOR SLIDING RAILS
Black Nylon34.16
MDGFLOOR GuIDE FOR 8MM TO 10MM GLASS SLIDING RAILS
Black Nylon29.03
MSC90 SINGLE CyLINDER 34.17
MTk90 TuRN kNOB 23.24
MER90 ESCuTCHEON ROSE 14.37
* Powder coat colour as per standard range stated on page 1.23
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.17
Price List
All prices exclude GST
AGA Door Rails for 10/12mm glass thickness (See page 3.46 for glass deduction details)
PRODUCT CODE DESCRIPTION10/12mm Rails up to 1000mmNA SSS PSS
uR41 BOTTOM PIVOTING RAIL - NON LOCkING
POA
uR42L BOTTOM PIVOTING RAIL - LOCkING (590)
uR42EL BOTTOM PIVOTING RAIL - LOCkING (PLuNGER)
uR43 TOP PIVOTING RAIL - NON LOCkING
uR44L TOP PIVOTING RAIL - LOCkING (590)
uR49 TOP PIVOTING RAIL - NON LOCkING FOR COC
uR47 TOP SIDE PANEL RAILuR48 BOTTOM SIDE PANEL RAIL
MuS48 SIDE PANEL RAIL SETTING BLOCkuRX EXTRA PER MM OVER 1000MM
15MM DOOR RAILS ALSO AVAILABLEPLEASE NOTE
• Specify glass thickness & when ordering locking rails please state cylinder type:DC - Double Cylinder SC - Single Cylinder CT - Cylinder Turn kA - keyed Alike kS - keyed Seperately
• Weatherseals for rails included• Locking Bottom Pivot Rail weighs 5.5kg
INSTALLATION PROCEDuRE FOR uNI-DOOR RAIL1. Remove End Caps2. Remove Spacers (Rods)3. Remove Covers (for access to body)4. Clamps rail to glass at correct door height by tightening the nylon screws to their maximum5. Hang door in place correctly6. Apply silicon sealant to the holes between glass and rail7. Replace covers, spacers and end caps after the setting of silicon
PRODUCT CODE DESCRIPTION PRICE
Mk590 GROuND kEEPER 24.23
MSC90 SINGLE CyLINDER 34.17
MTk90 TuRN kNOB 23.24
MER90 ESCuTCHEON ROSE 14.37
The above rails are available with a lead-time of 3-4 days into store + delivery
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.18
Price List
All prices exclude GST
Metro Floor Springs & Components (See page 3.47 for installation details)PRODUCT CODE DESCRIPTION PRICE
REMOVABLE SPINDLES (FLOOR CLEARANCE OF 12MM FOR PATCH FITTINGS)
236.95
MFX840WNHO WEAk STRENGTH 15NM NON HOLD OPEN
MFX840WHO WEAk STRENGTH 15NM HOLD OPEN 90º
MFX840SNHO STANDARD STRENGTH 25NM NON HOLD OPEN
MFX840SHO STANDARD STRENGTH 25NM HOLD OPEN
Extended Spindles to suit MFX Floor SpringsPRODUCT CODE DESCRIPTION PRICE
MFX5 EXTENDED By 5MM 34.42MFX10 EXTENDED By 10MM 42.50MFX15 EXTENDED By 15MM 49.17MFX20 EXTENDED By 20MM 55.97MFX25 EXTENDED By 25MM 62.67MFX30 EXTENDED By 30MM
POAMFX35 to MFX50 EXTENDED By 35MM, 40MM, 45MM OR 50MM
Floor Spring ComponentsPRODUCT CODE DESCRIPTION PRICE
MFX840 BODy ONLy 165.33
MFXB BOX ONLy 27.50
MFXCP SATIN STAINLESS STEEL COVER PLATE 27.61
MFXSP COVER PLATE SCREW PACk 7.34
PLEASE NOTE• These floor springs are designed to be used with Metro Patch Fittings & Door Rails• Floor Springs are supplied with foundation box, satin stainless steel cover plate & screw pack• Floor box dimensions are 307mm x 108mm x 40mm Deep• Maximum door width is 1100mm & maximum door weight is 100kg
POA - Price On Application
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.19
Price List
All prices exclude GST
Concealed Overhead Closers (See page 3.48 for installation details)
PRODUCT CODE DESCRIPTION PRICE
MFGCOC90SNHO STANDARD STRENGTH 25NM NON HOLD OPEN 90º
185.22
MFGCOC90SHO STANDARD STRENGTH 25NM HOLD OPEN 90º
MFGCOC105SHO STANDARD STRENGTH 25NM HOLD OPEN 105º
MFGCOC90HHO HEAVy STRENGTH 35NM HOLD OPEN 90º
PLEASE NOTE• These COC’s are supplied with side load arm and bottom pivot assembly• Maximum door width is 1100mm & maximum door weight is 100kg
Geze Floor Springs (See page 3.49 for detailed drawing)PRODUCT CODE DESCRIPTION PRICE
GTS500NVNHO Adjustable Strength EN1 - EN4(15NM - 30NM) Non Hold Open
518.54
GTS500NVHO Adjustable Strength EN1 - EN4(15NM - 30NM) Hold Open 85º
GTS500CP SSS SSS GTS500 Floorspring Cover Plate & Screw Pack 25.11
• Back Check Feature• Closing Speed & Latching Action adjustable• Safety Valve preventing deliberate overloading• Closing range from approx.170º
• Large adjustment range in Galvanised Cement Box - Height 6mm, Lateral 10mm & Length 10mm
• Floor box dimensions are 278mm x 82mm x 42mm Deep, Max. door width is 1100mm & Max. door weight is 150kg
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.20
Price List
Geze Floor Springs (See page 3.49 & 3.50 for detailed drawings) & Extended SpindlesPRODUCT CODE DESCRIPTION PRICE
GTS550NV
• Adjustable Strength EN3 - EN6 (25NM - 40NM)
• Variable Hold Open (80º-165º)• Back Check fixed as of approx.
70º• Closing Speed, Delay & Laching
Action adjustable• Safety Valve preventing deliber-
ate overloading• Test cycles = 1,000,000• Closing range from approx.
170-175º• Large adjustment range in Gal-
vanised Cement Box - Height 6mm, Lateral 10mm & Length 9mm
• Floor box dimensions are 342mm x 82mm x 54mm Deep, Max. door width is 1400mm & max. door weight is 300kg
751.34
GTS550CP SSS SSS GTS550NV Floorspring Cover Plate & Screw Pack 53.04
GES5 5mm Extended Spindle 37.46
GES8 8mm Extended Spindle 42.71
GES10,13,15 or 20 10,13,15 or 20mm Extended Spindle 47.46
GES25 & 28 25 or 28mm Extended Spindle 52.21
GES30 30mm Extended Spindle 57.13
GES35,40,45 or 50 35,40,45 or 50mm Extended Spindle 62.21
POA - Price On Application
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.21
Price List
All prices exclude GST
Pull Handles
PRODUCT CODE DESCRIPTION SSS PSS
MD300
D PuLL HANDLE
332mm/337mm/482mm/532mm/632mm x 32mm Diameter
Holes Centres: 300mm/305mm/450mm/500mm/600mmHole Diameter: 14mm
77.38 NSI -
MD305 77.38 87.05
MD450 112.78 133.93
MD500 122.78 NSI -
MD600-2 142.87 171.44
MO300OFFSET D HANDLE
337mm/482mm x 32mm Diameter
Hole Centres: 305mm/450mmHole Diameter: 14mm
213.92 -
MO305 107.15 122.46
MO450 273.36 POA
MCS300
HALF CIRCLE HANDLE
332mm x 32mm Diameter
Hole Centres: 300mmHole Diameter: 14mm
284.57 POA
MCR305
HALF CIRCLE HANDLE
337mm x 32mm Diameter
Hole Centres: 305mmHole Diameter: 14mm
119.00 131.88
MB450BOW HANDLE
482mm/632mm x 32mm Diameter
Hole Centres: 450mm/600mmHole Diameter: 14mm
267.16
POA
MB600 356.11
POA - Price On Application NSI - Non Stock Item
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.22
Price List
All prices exclude GST
Pull Handles
PRODUCT CODE DESCRIPTION SSS PSS Powder Coated
MF450-25FINELINE PuLL HANDLE
(H Shape Round Section)
450mm x 25mm Diameter450mm/600mm/900mm/1200mm x 25mm/32mm Diameter
Hole Centres:330mm/250mm/450mm/500mm/700mm/1000mm
Hole Diameter: 12mm
179.52- -
MF450-32 193.00
MF600 - 338.72 -
MF600-32 214.47 - -
MF900 310.00 371.00 432.00
MF1200 350.00 420.00 -
MFS600
FINELINE PuLL HANDLE(H Shape Square Section)600mm x 25mm SquareHole Centres: 400mmHole Diameter: 12mm
264.42
POA -
MFOS600
FINELINE OFFSET PuLL HANDLE(H Shape Offset Square Section)
600mm x 25mm SquareHole Centres: 425mmHole Diameter: 12mm
264.42
NSI
MFC450 CEE PuLL HANDLE(Curved Round Section)
450mm/600mm x 25mm DiameterHole Centres: 250mm/350mm
Hole Diameter: 12mm
235.17
MFC600 276.68
MSD450 DEE PuLL HANDLE(Square Section)
475mm/625mm x 25mm SquareHole Centres: 450mm/600mm
Hole Diameter: 12mm
162.38
MSD600 264.42
MJ450
“S” TAPER PuLL HANDLE(Solid Brass Section)
450mm LongHole Centres: 215mmHole Diameter: 12mm
597.49SATIN
CHROME
NSI
- -
MT450
STRAIGHT TAPER PuLL HANDLE(Solid Brass Section)
450mm LongHole Centres: 215mmHole Diameter: 12mm
509.16SATIN
CHROME
NSI
- -
POA - Price On ApplicationNSI - Non Stock Item with a lead-time of 10-15 business days into store + delivery
MFS6
00
MFOS
600
MFC4
50/60
0
MSD6
00
MJ45
0
MT45
0
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.23
Price List
All prices exclude GST
Pull Handles
PRODUCT CODE DESCRIPTION SSS
M750
ICON PuLL HANDLE(Solid Round Section)
750mm/1250mm/1750mm x 25mm Diameter
Hole Centres: 2/3/4 x 500mmHole Diameter: 14mm
Other Sizes Available on Request
770.15
NSI
M1250942.77
NSI
M17501115.38
NSI
218-AAF/1ROuND/SQuARE PuLL HANDLE
300mm/800mm/1300mm/1800mm/2300mm x 32mm Diameter
Hole Centres: 200mm/700mm/1200mm/1700mm/2200mmHole Diameter: 12mm
Handle Projection: 92mm
Other sizes available on request
POA
NSI
218-AAF/6
218-AAF/11
218-AAF/16
218-AAF/21
MRS550
ROuND/SQuARE OFFSET PuLL HANDLE
550mm x 32mm Diameter
Hole Centres: 450mmHole Diameter: 12mm
269.25
NSI
MRD300DEE PuLL HANDLE
320mm/470mm/620mm x 40mm x 20mm
Hole Centres: 300mm/450mm/600mmHole Diameter: 12mm
167.91NSI
MRD450 203.94NSI
MRD600 234.50NSI
POA - Price On Application NSI - Non Stock Item with a lead-time of 10-15 business days into store + deliveryPolished Stainless Steel available on Request with extended lead-time
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.24
Price List
All prices exclude GST
Pull Handles
PRODUCT CODE DESCRIPTION SSS PSS
218-ACE/1 Wiggly Pull Handle670mm/930mm x 32mm Diameter
Holes Centres: 380mm/635mmHole Diameter: 12mm
Handle Projection: 92mm
Non Stock Item
POA
NSI
POA
NSI
218-ACE/2
218-ACA/1
Curve Pull Handle690mm x 32mm Diameter
Holes Centres: 425mmHole Diameter: 12mm
Handle Projection: 92mm
Non Stock Item
218-ABC/1Harp Pull Handle
420mm/950mm x 32mm Diameter
Holes Centres: 320mm/785mmHole Diameter: 12mm
Handle Projection: 92mm
Non Stock Item218-ABC/2
218-ACO/1Cradle Pull Handle
450mm/500mm x 32mm Diameter
Holes Centres: 100mm/130mmHole Diameter: 12mm
Handle Projection: 92mmNon Stock Item
218-ACO/2
A450Arc Pull Handle
398mm/824mm OA Length
Holes Centres: 350mm/750mmHole Diameter: 16mm
Handle Projection: 85mm
250.00 300.00
A750 350.00 420.00
POA - Price On ApplicationNSI - Non Stock Item with a lead-time of 10-15 business days into store + delivery
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.25
Price List
All prices exclude GST
Channel Sections
PRODUCT CODE DESCRIPTION NA Mill
CS2525MM X 20MM
CHANNEL SECTION
StockLength
5000mm68.95 56.71
CS25CL Cut LengthPer Metre 17.24 14.18
CS40
40MM X 20MM CHANNEL SECTION
StockLength
5000mm93.53 77.80
CS40CL Cut LengthPer Metre 23.38 19.45
CS243
40MM X 30MM TWO PEICECHANNEL SECTION
See Page 3.25A forGlazing Backing Seal & Wedges
StockLength
5000mm180.11 153.06
CS243CL Cut LengthPer Metre 45.03 38.27
CS143
40MM X 30MM ONE PEICECHANNEL SECTION
See Page 3.25A forGlazing Backing Seal & Wedges
StockLength
5000mm132.92 100.50
CS143CL Cut LengthPer Metre 33.23 25.13
CS679 25MM X 10G PAN SCREWS SQuARE DRIVE 304 SS 0.25
CS679CL 35MM X 10G PAN SCREWS SQuARE DRIVE 304 SS 0.35
CS673 50MM X 10G PAN SCREWS SQuARE DRIVE 304 SS 0.45
Channels are available in Powder Coated & other Anodised finishes on Request See Section 6 for Setting Blocks
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.25A
Price List
All prices exclude GST
Glazing Backing Seal & Wedges
PRODUCT CODE DESCRIPTION Price Per Metre
9272 Santoprene Backing Seal 2mm Compressed 1.88
9275 Santoprene Backing Seal 4mm Compressed 2.10
Reference for Dynex PVC and Santoprene Wedge (not supplied by MFGS but shown for reference)
PRODUCT PVC CODE COLOUR STRIPE COIL LENGTH COMPRESSED SIZE MM
SANTOPRENE CODE
40470 Black 150m 7.0 90470
40460 Brown 150m 6.0 90460
40455 Green 150m 5.5 90455
40450 White 200m 5.0 90450
40445 yellow 250m 4.5 90445
40440 Orange 250m 4.0 90440
40435 Red 250m 3.5 90435
40430 Purple 250m 3.0 90430
40425 Blue 400m 2.5 90425
40420 Grey 400m 2.0 -
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.26
Price List
All prices exclude GST
Door SealsPRODUCT CODE DESCRIPTION
DS180-12 DS180-10
DS180-12
12mm GLASSALuMINIuM DOOR SEAL
Natural Anodised with polypropylene grey pileIncludes double sided adhesive foam tape
Standard Length 3000mm
59.85
DS180-10
10mm GLASSALuMINIuM DOOR SEAL
Natural Anodised with polypropylene grey pileIncludes double sided adhesive foam tape
Standard Length 3000mm
59.85
NSI
IS7140 IS7150
IS714012mm GLASS
CLEAR POLyCARBONATE DOOR SEALwith black polypropylene pile
Standard Length 3000mm
44.87
IS715015mm GLASS
CLEAR POLyCARBONATE DOOR SEALwith black polypropylene pile
Standard Length 3000mm
44.87
NSI
DSS90-X-yX = 10mm or 12mm Glass Thickness
y = Sidepanel/Wall Clearanceusing different size woolpile
DSS90-10-18
12mm/15mm GLASS90° ALuMINIuM DOOR SEAL
Natural Anodised Slim profilewith polypropylene grey pile.
Suitable for Manual or Automatic Sliding Doors.Fitted to back edge of door to
create seal back to side panel/wall.Will reduce draughts & noise.
Includes double sided adhesive foam tape.Profile matches DS180 seals above.
Standard Length 3000mm.
73.41
NSI
DSS90-10-20DSS90-10-23DSS90-10-26DSS90-10-28DSS90-12-18DSS90-12-20DSS90-12-23DSS90-12-26DSS90-12-28
Decal Vision Disc’sPRODUCT CODE DESCRIPTION
DD30 DS25
DD30SATIN STAINLESS STEEL
DECAL VISION DISC30mm Diameter, uV glued to glass
to act as a vision strip8.02
DS25SATIN STAINLESS STEEL
DECAL VISION DISC25mm x 25mm Square, UV glued to glass
to act as a vision strip
NSI - Non Stock Item with a lead-time of up to 7 days from order date into store + delivery