Specifications Dimensions
Performance
FT Series
Temperature
ture TEM
PERA
TUR
E
FT Size Size L x W x H FT38 3/8 inch 60mm x 20mm x 24mm FT12 1/2 inch 70mm x 22mm x 27.5mm FT34 3/4 inch 85mm x 29mm x 34mm
FT100 1 inch 96mm x 37mm x 42mm
specification sensor temperature range1 10 °C to 90 °C (50°F to 194°F)6 applicable chemistry virtual any chemistry maximal working pressure2 check out max. pressure for specific temperature and sensor size in pressure graph
specification sensing element measuring range1 ±0°C to 150°C (32°F to 302°F)
(PT100, PT1000) accuracy3 ±0.25°C (±0.45°F) @ 90°C (194°F) standard | up to ±0.075°C (±0.135°F) on request interchangeability3 ±0.13°C (±0.234°F) @ 20°C (68°F) standard | up to ±0.04°C (±0.072°F) on request long term stability @ 150°C less than 0.04%
element response time T50 T63 in water stream (v = 0.4m/s) 0.05 sec 0.08 sec
sensor rise time3 T63 T904 < 0.6 sec < 1.0 sec @ 1m/s (purified water)
wetted material thermal conduction element Al2O3 (99.99987% purity) body virgin PTFE optional body (only on request) PFA
material - no media contact
top and bottom cover PVDF sensing element platinum thin film element fixing elements stainless steel screws (A4 grade) cable 4 line shielded litz wire FEP insulation sealing Perfluorelastomer FFKM (ultra pure)
fluid connection available size5 for 3/8" to 1" tube size (e.g. Pillar Fitting®, Flaretek®, Swagelok® and more)
pressure drop coefficient
3/8" Cv = 7.73 [US gpm] | Kv = 6.68 [m3/h] 1/2" Cv = 30.08 [US gpm] | Kv = 26.03 [m3/h] 3/4" Cv = 248 [US gpm] | Kv = 213.3 [m3/h] 1" Cv = 525 [US gpm] | Kv = 451.5 [m3/h]
1 higher temperature on request | 2 higher pressure on request | 3class F0.1 DIN standard (higher on request) | 4 time to reach 63% 90% of final value for whole sensor assembly | 5 customized size on request | 6HF49% limited to 80°C (176°F)
The FT series thermo sensors made out of fluorocarbon plastic like PTFE or PFA are specially designed for monitoring the temperature of ultrapure water, chemicals and gases for the semiconductor, photovoltaic or other related industries. Due to the innovative sealing and used sapphire sensing technology, no contamination, liquid entrapping or rapid aging effects takes place. The monitoring of aggressive ultra pure fluids or gases without sensing drifts over long periods are guaranteed. Patent granted.
§ Measuring characteristics as per DIN EN 60751
§ Best accuracy, repeatability and stability
§ Ultra fast response time
§ Made out of ultra pure and chemical inert materials
§ PT100 or PT1000 measuring technology
§ Useable with a broad range of connection technologies (Pillar®, Flaretek®, Swagelok® and many more)
PTFE
Performance
1 FT_REV2.5
Maximum pressure vs. tube size
Note: Information presented enclosed is subject to change as product enhancements are made on a regular basis.
* all sizes standardized at 1m/s water flow velocity
TEMPER
ATU
RE
Technical Data Sensing Elements (PT100 / PT1000)*
Type: Platin thin film element (thin film technology)
Specification: DIN EN 60751:2009-05
Standard temperature range: -0°C to +150°C (32°F to +302°F)*
Standard temperature coefficient: PT100 (PT1000) | TCR = 0.00385!!! * Standard tolerance class: standard: F0.1 | optional: 1/5 DIN B, 1/10 DIN B* Recommended applied current: 1mA @ 100Ω (0.3mA @ 1000Ω)
*other tolerance classes, temperature ranges, temperature coefficients or ohmic values on request
Technical Data Cable
Type: 4 wire cable / shielded / FEP insolation
Specifications: MIL-C-27500, MIL-W-16878 and ASTM-B-298
Temperature range: -200°C to +200°C (-328°F to +392°F)
Insulation class: ET+ (up to 250V AC eff) Type litz wire: silver plated copper wire
Connection Plan
Optional: Contact manufacturer for specific fitting assembly, different cable length or different class/type of sensor element.
Model Max.depth[mm]
FT38 23FT12 28FT34 38FT100 42
2 FT_REV2.5
Pressure drop coefficient Cv
Note: don’t connect wires which are not used, it will effect accuracy!
Sensor labeling according DIN EN 60751:2009-05 Example: ---------------------------------- 1xPt100/F0.1/4/+10/+90----------------------------------
Scope of delivery
• Cable length: 2 meters • PTFE (PFA) housing • Tube ends / no fittings
Use of proper flare tool Orientation and flow direction
! Measuring characteristics as per DIN EN 60751
! Best accuracy, repeatability and stability
! Fast response time
! Highest thermo-chemical resistance while maintaining ultra pure performance
! PT100 or PT1000 measuring technology
! Useable with a broad range of connection technologies (Pillar®,
Flaretek®, Swagelok® and many more)
Specifications
Maximum pressure vs. tube size
Dimensions
TEMPER
ATUR
E
1 FC_REV2.2
Performance
FC Series Data Sheet
FC Series:::....
FC series size
Fitting size L x W x H
FC38 3/8 inch 60mm x 20mm x 24mm
FC12 1/2 inch 70mm x 22mm x 27.5mm x
FC34 3/4 inch 85mm x 29mm x 34mm
FC100 1 inch 96mm x 37mm x 42mm
specification sensor
temperature range1 10 °C to 130 °C (50°F to 266°F)
applicable chemistry virtual any chemistry
maximal working pressure2 check out max. pressure for specific temperature and sensor size in pressure graph
specification sensing element (PT100, PT1000)
measuring range1 ±0°C to 150°C (32°F to 302°F) accuracy3 ±0.25°C (±0.45°F) @ 90°C (194°F) standard | up to ±0.075°C (±0.135°F) on request interchangeability3 ±0.13°C (±0.234°F) @ 20°C (68°F) standard | up to ±0.04°C (±0.072°F) on request long term stability @ 150°C less than 0.04% element response time T50 T63 in water stream (v = 0.4m/s) 0.05 sec 0.08 sec
sensor rise time3 T63 T904 < 0.7 sec < 1.1 sec @ 1m/s (purified water)
wetted material thermal conduction element C (vitreous carbon) body virgin PTFE optional body -
material - no media contact
top and bottom cover PVDF sensing element platinum thin film element fixing elements stainless steel screws (A4 grade) cable 4 line shielded litz wire FEP insulation sealing Perfluorelastomer FFKM (ultra pure)
fluid connection available size5 for 1/4" to 1" tube size (e.g. Pillar Fitting®, Flaretek®, Swagelok® and more)
Pressure drop coefficient
3/8“ Cv = 7.73 [US gpm] | Kv = 6.68 [m3/h] 1/2“ Cv = 30.08 [US gpm] | Kv = 26.03 [m3/h] 3/4“ Cv = 248 [US gpm] | Kv = 213.3 [m3/h] 1“ Cv = 525 [US gpm] | Kv = 451.5 [m3/h]
1 higher temperature on request | 2 higher pressure on request | 3 class F0.1 DIN standard (higher on request) | 4 time to reach 63% 90% of final value for whole sensor assembly | 5 customized size on request Note: Information presented enclosed is subject to change as product enhancements are made on a regular basis
The FC series thermo sensors made out of fluorocarbon plastic (PTFE) are specially designed for monitoring the temperature of ultrapure water, chemicals and gases for the semiconductor, photovoltaic or related industries. Due to the innovative sealing and used carbon sensing technology, no contamination, liquid entrapping or rapid aging effects takes place. The monitoring of aggressive ultra pure fluids or gases in high temperature environments without sensing drifts over long periods are guaranteed. Patent granted.
>> Highest thermo-chemical resistance <<
TEMPER
ATUR
E
FC_REV2.2 2
FC series Data Sheet
Technical Data Sensing Elements (PT100 / PT1000)*
Type: Platin thin film element (thin film technology)
Specification: DIN EN 60751:2009-05
Standard temperature range: -0°C to +150°C (32°F to +302°F)*
Standard temperature coefficient: PT100 (PT1000) | TCR = 0.00385!"# * Standard tolerance class: standard: F0.1 | optional: 1/5 DIN B, 1/10 DIN B* Recommended applied current: 1mA @ 100Ω (0.3mA @ 1000Ω)
*other tolerance classes, temperature ranges, temperature coefficients or ohmic values on request
Technical Data Cable
Type: 4 wire cable / shielded / FEP insolation
Specifications: MIL-C-27500, MIL-W-16878 and ASTM-B-298
Temperature range: -200°C to +200°C (-328°F to +392°F)
Insulation class: ET+ (up to 250V AC eff) Type litz wire: silver coated copper wire
Connection Plan
Optional: Contact manufacturer for specific fitting assembly, different cable length or different class/type of sensor element. .
Model Max. depth [mm] FT38 23 FT12 28 FT34 38
FT100 42
Pressure drop coefficient Cv:
Note: don’t connect wires which are not used, it will effect accuracy! Scope of delivery
• Cable length: 2 meters • PTFE (PFA) housing • Tube ends / no fittings
Use of proper flare tool
Sensor labeling according DIN EN 60751:2009-05 Example: ---------------------------------- 1 x Pt100/F0.1/4/+10/+90 ----------------------------------
Specifications
Dimensions!!
TEM
PE
RA
TUR
E
FT Immersion:....
specification sensor
temperature range1 max. 100°C (212°F)1
applicable chemistry! virtual any chemistry
working pressure2 atmospheric pressure2
specification sensing element
measuring range -50°C to 150°C (-58°F to 302°F)
accuracy 3 ±0.08°C @ 100°C (212°F)3 interchangeability3 ±0.0425°C @ 25°C (77°F)3
repeatability / stability less than ±0.05°C
element response time T50 T63 in water stream (v = 0.4m/s) 0.05 sec 0.08 sec sensor rise time3 T63 T904 ~0.6 sec 1 sec @ 1m/s (purified water)
wetted material
thermal conduction element Al2O3 (99.99987% purity)
body virgin PTFE (PFA on request) sealing Perfluorelastomer FFKM (ultra pure)
material - no media contact
outlet fitting cable PVDF (Viton sealing)
sensing element platinum thin film element cable 4 line shielded litz wire with PTFE insulation (FEP on request)
size5 check dimensions above
1 higher temperature on request | 2 higher pressure on request | 3 class 1/10 DIN | 4 time to reach 63% 90% of final value for whole sensor assembly | 5 customized size on request
The FT Immersion thermo sensors made out of fluorocarbon plastic like PTFE or NEW PFA are specially designed for measuring bath temperatures of ultrapure water, chemicals and gases for the semiconductor, photovoltaic or other related industries. Due to the innovative sealing and used sapphire sensing technology, no contamination, liquid entrapping or rapid aging effects takes place. The monitoring of aggressive ultra pure fluids or gases without sensing drifts over long periods are guaranteed. Patent pending.
! Measuring characteristics as per DIN EN 60751
! Best accuracy, repeatability and stability
! Ultra fast response time
! Made out of ultra pure and chemical inert materials
! PT1000 measuring technology
FasTemp size
Fitting size
L x D1 x D2 mm
!Immersion N.A. 110 x 20 x 15
!
DEC!2014!1
TEM
PE
RA
TUR
E
Technical Data Sensing Element
Type: Platin thin film element (Thin film technology)
Specification: DIN EN 60751:2009-01
Standard temperature range: -50°C to +150°C (-58°F to +302°F)*
Standard temperature Coefficient: TCR = 0.00385!!! * Standard tolerance Class AA (1/3 DIN B)*
*other tolerance classes, temperature ranges or temperature coefficients on request
Technical Data Cable
Type: 4 wire cable / shielded / FEP insolation
Specifications: MIL-C-27500, MIL-W-16878 and ASTM-B-298
Temperature range: -200°C to +200°C (-328°F to +392°F)
Insulation Class ET+ (up to 250V AC eff) Type litz wire: silver coated copper wire
Connection Plan Sensor labeling according DIN EN 60751:2009-01 Example: !!!!!!!!!!!!))))))))))))))))))))))))))))))))))! 1"x"Pt1000/AA/4/*50/+150"!!!!!!!!!!!!!))))))))))))))))))))))))))))))))))!
Scope of delivery
• Cable length: 2 meters • 1/3 DIN B temperature sensor element
Optional: Different cable length or different class/type of sensor element.
DEC!2014! 2