Sanitary Systems Catalogue 2014/2015 63
Geberit Monolith
Description
Overview • Overview Monolith sanitary modules → Page 64
Sanitary modules
• Monolith for WC H101 → Page 69
• Monolith for WC H114 → Page 70
• Monolith Plus for WC H101 → Page 72
• Monolith Plus for WC H114 → Page 75
• Monolith for bidet → Page 77
• Monolith for washbasin → Page 78
Accessories
• Water supply connection → Page 91
• Drainage connection → Page 91
• Fixation → Page 92
64 Sanitary Systems Catalogue 2014/2015
Geberit MonolithOverview
OverviewSystem overview Geberit Monolith
Geberit Monolith for floor standing WC, back to wall, height 101 cm
Geberit Monolith sanitary module
131.001.xx.1 and 131.201.xx.1
WC ceramic
Requirements for floor standing WC, back to wall: - Flat rear to ensure a closed connection to Monolith
- Open rear and floor to enable floor drainage
Location of drainage connection
floor drainage wall drainage
X = 7 cm - 15 cm X = > 15 cm Y = 18 ± 1 cm
Accessories for drainage connectionall accessories in scope
of delivery included
131.081.11.1131.083.16.1
Location of water connection
bottom connection - invisible side connection - visible
Accessories for water connection all accessories in scope of delivery included
131.071.21.1
X Y
0
13 4 47 4
≤ 55
≤ 55
0
80 12
30 3
Geberit MonolithOverview
Sanitary Systems Catalogue 2014/2015 65
System overview Geberit Monolith
Geberit Monolith for wall-hung WC, height 101 cm
Geberit Monolith sanitary module
131.021.xx.1 and 131.221.xx.1 131.024.xx.1 and 131.224.xx.1
WC ceramic commercial wall-hung ceramic Geberit AquaClean 180.100.xx.1 or 146.182.11.1
Location of drainage connection
wall drainage floor drainage
Y = 24 - 26 cm Y = 21 - 23 cm Y = 17 cm - 19 cm x = 15 cm - 30 cm
Accessories for drainage connectionall accessories in scope
of delivery included
131.085.11.1 131.108.11.1131.088.29.1
Location of water connection
bottom connection - invisible side connection - visible
Accessories for water connection all accessories in scope of delivery included
131.071.21.1
Y X
21
0
13 4 47 4
≤ 55
≤ 55
0
80 12
30 3
66 Sanitary Systems Catalogue 2014/2015
Geberit MonolithOverview
System overview Geberit Monolith
Geberit Monolith for floor standing WC, back to wall, height 114 cm
Geberit Monolith sanitary module
131.033.xx.1 and 131.233.xx.1
WC ceramic
Requirements for floor standing WC, back to wall: - Flat rear to ensure a closed connection to Monolith
- Open rear and floor to enable floor drainage
Location of drainage connection
floor drainage wall drainage
X = 7 cm - 15 X = > 15 cm Y = 18 ± 1 cm
Accessories for drainage connection
all accessories in scope of
delivery included
131.081.11.1131.083.16.1
Location of water connection
bottom connection - invisible side connection - visible rear water connection - invisible
Accessories for water connection
131.138.00.1131.071.21.1
all accessories in scope of delivery included
XY
0
30
92−102
104
R½R½
18
1145
505
≤ 5
0
13 4 47 4
≤ 55
0
95 12
30 3
0
30
92−102
104
R½R½
18
1145
505
Geberit MonolithOverview
Sanitary Systems Catalogue 2014/2015 67
System overview Geberit Monolith
Geberit Monolith for wall-hung WC, height 114 cm
Geberit Monolith sanitary module
131.031.xx.1 and 131.231.xx.1 131.032.xx.1 and 131.232.xx.1
WC ceramic commercial wall-hung ceramic Geberit AquaClean 180.100.xx.1 or 146.182.11.1
Location of drainage connection
wall drainage floor drainage
Y = 24 - 26 cm Y = 21 - 23 cm Y = 17 cm - 19 cm x = 15 cm - 30 cm
Accessories for drainage connection
all accessories in scope of
delivery included
131.085.11.1 131.108.11.1131.088.29.1
Location of water connection
bottom connection - invisible side connection - visible rear water connection - invisible
Accessories for water connection
131.138.00.1 131.071.21.1
all accessories in scope of delivery included
Y X
0
30
92−102
104
R½R½
18
1145
505
0
13 4 47 4
≤ 55
0
95 12
30 3
0
30
92−102
104
R½R½
18
1145
505
68 Sanitary Systems Catalogue 2014/2015
Geberit MonolithOverview
System overview Geberit Monolith for wall-hung washbasin
Wall-mounted tap Counter top tap
Mixer right Mixer left Service opening with openings for flexible
hosesbore holes: 10 cm bore holes: 8 cm
Mixer / Specification
Tap producerHansGrohe / Axor
Hansa / KWCDornbracht / V&B
Vola all
Drawer left 131.040.xx.1 131.044.xx.1 131.048.xx.1
Drawer right 131.041.xx.1 131.045.xx.1 131.049.xx.1
Drawer left & right 131.042.xx.1 131.046.xx.1 131.050.xx.1
Without drawers 131.043.xx.1 131.047.xx.1 131.051.xx.1
815
732
104
1145
13−45
8−16
0−2310
≥ 30
R½
815
732
104
1145
13−45
8−16
0−238
≥ 30
R½
815
732
1145
13−45
8−16
0−23
≥ 30
R½
Geberit MonolithMonolith sanitary modules for WC
Sanitary Systems Catalogue 2014/2015 69
Monolith sanitary modules for WC
Geberit Monolith sanitary module for floor standing WC, H101
Application Purpose
• For floor standing WC• For mounting on finished floors
Characteristics
• Self-supporting• Compensation of dimensional tolerances• Height compensation up to 2 cm• Dual flush• Adjustable flushing volume• Fully insulated against condensation• Water supply connection at the bottom left or right
Product Details
Scope Of Delivery
• Water supply connection set with 2 angle stop valves R 1/2 • Flush pipe 23 x 23 cm, dia. 50/44 mm• WC outlet bend, HDPE, dia. 90 mm• Adapter sleeve, dia. 90/110 mm • Rubber seal EPDM• Fastening material for solid wall
Ordering Information
Geberit Monolith sanitary module for wall-hung WC and AquaClean Sela, H101
Application Purpose
• For wall-hung WC with fastening distance 18 cm or 23 cm• For mounting on finished floors
Characteristics
• Self-supporting• Compensation of dimensional tolerances• Height compensation up to 2 cm• Dual flush• Adjustable flushing volume• Fully insulated against condensation• Water supply connection at the bottom left or right
Product Details
Scope Of Delivery
• Water supply connection set with 2 angle stop valves R 1/2 • Flush pipe 23 x 23 cm, dia. 50/44 mm• WC outlet pipe, HDPE, dia. 90 mm • Adapter sleeve, dia. 90/110 mm • 2 threaded rods M12 for ceramics fastening• Fastening material for solid wall• Acoustical insulation set• Fastening material for wall-hung WC
Ordering Information
Geberit Monolith sanitary modules for WC
Height x Width x Depth 101 x 48,5 x 10,6 cm
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 6 and 3 l
Flush range large 4.5 / 6 l
Article no. Colour
131.001.SI.1 white glass
131.001.SJ.1 black glass
131.001.SQ.1 umber glass
131.001.SL.1 mint glass
485
0
908R½
13 ±413 ±4
18 ±1
32–36
47 ±4
101 ±1
106
0
Height x Width x Depth 101 x 48,5 x 10,6 cm
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 6 and 3 l
Flush range large 4.5 / 6 l
Article no. Colour
131.021.SI.1 white glass
131.021.SJ.1 black glass
131.021.SQ.1 umber glass
131.021.SL.1 mint glass
0
908
485
R½
101
18/23
25
47 413 4 13 4
106
43
0
70 Sanitary Systems Catalogue 2014/2015
Geberit MonolithMonolith sanitary modules for WC
Geberit Monolith sanitary module for Geberit AquaClean 8000, H101
Application Purpose
• For use with Geberit AquaClean 8000 and Geberit AquaClean 8000plus
• For mounting on finished floors
Characteristics
• Self-supporting• Compensation of dimensional tolerances• Height compensation up to 2 cm• Dual flush• Adjustable flushing volume• Fully insulated against condensation• Water supply connection at the bottom left or right
Product Details
Scope Of Delivery
• Water supply connection set with 2 angle stop valves R 1/2 • Flush pipe 23 x 23 cm, dia. 50/44 mm• WC outlet pipe, HDPE, dia. 90 mm • Adapter sleeve, dia. 90/110 mm • 2 threaded rods M12 for ceramics fastening• Acoustical insulation set• Fastening material for solid wall• Fastening material for wall-hung WC
Ordering Information
Geberit Monolith sanitary modules for floor standing WC, H114
Application Purpose
• For replacing floor standing WC with flushing valve• For replacing floor standing WC with close-coupled cistern• For replacing floor standing WC with concealed cistern• For use in floor outlet connections• For use in wall outlet connections, outlet height 18 cm• For mounting on finished floors• For installation in renovations, conversions and new buildings• For installing in front of a solid wall
Characteristics
• Sanitary module with front cladding made of toughened safety glass (ESG) and lateral cladding made of brushed aluminium
• Self-supporting• Compensation of dimensional tolerances• Height compensation up to 2 cm• Dual flush• Adjustable flushing volume• Fully insulated against condensation• Water connection at the rear centre
Product Details
Scope Of Delivery
• Water supply connection set with angle stop valve• Flush pipe 23 x 23 cm, dia. 50/44 mm• P-bend, PP, dia. 90 mm • Adapter sleeve, dia. 90/110 mm • Rubber seal EPDM• Fastening material
Ordering Information
Height x Width x Depth 101 x 48,5 x 10,6 cm
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 6 and 3 l
Flush range large 4.5 / 6 l
Article no. Colour
131.024.SI.1 white glass
131.024.SJ.1 black glass
131.024.SQ.1 umber glass
0
908
485
R½
101
25
15
2818
13 4 13 447 4
106
455
0
25
Height x Width x Depth 114,5 x 50,5 x 10,6 cm
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 6 and 3 l
Flush range large 4.5 / 6 l
Article no. Colour
131.033.SI.1 white glass
131.033.SJ.1 black glass
131.033.SQ.1 umber glass
0
505
104
R½
30
1145 ±1
32–36
92–102
18 ±1
106
0
109
Geberit MonolithMonolith sanitary modules for WC
Sanitary Systems Catalogue 2014/2015 71
Geberit Monolith sanitary module for wall-hung WC and AquaClean Sela, H114
Application Purpose
• For replacing wall-hung WC with flushing valve• For replacing wall-hung WC with close-coupled cistern• For replacement of wall-hung WC with concealed cistern with
maximum service opening < 109 cm• For use in wall outlet connections, outlet height in excess of 23 cm• For mounting on finished floors• For installation in renovations, conversions and new buildings• For installing in front of a solid wall• For use with Geberit AquaClean Sela
Characteristics
• Element height 114 cm• Sanitary module with front cladding made of toughened safety glass
(ESG) and lateral cladding made of brushed aluminium • Self-supporting• Compensation of dimensional tolerances• Height compensation up to 2 cm• Dual flush• Adjustable flushing volume• Fully insulated against condensation• Water connection at the rear centre• Ceramics fastening M12, fastening distance 18 cm
Product Details
Scope Of Delivery
• Water supply connection set with angle stop valve• WC outlet pipe, HDPE, dia. 90 mm • Adapter sleeve, dia. 90/110 mm • Flush pipe 23 x 23 cm, dia. 50/44 mm• 2 threaded rods M12 for ceramics fastening• Acoustical insulation set• Fastening material
Ordering Information
Geberit Monolith sanitary module for Geberit AquaClean 8000, H114
Application Purpose
• For replacing wall-hung WC with flushing valve• For replacing wall-hung WC with close-coupled cistern• For replacement of wall-hung WC with concealed cistern with
maximum service opening < 109 cm• For use in wall outlet connections, outlet height in excess of 23 cm• For mounting on finished floors• For installation in renovations, conversions and new buildings• For installing in front of a solid wall• For use with Geberit AquaClean 8000
Characteristics
• Element height 114 cm• Sanitary module with front cladding made of toughened safety glass
(ESG) and lateral cladding made of brushed aluminium • Self-supporting• Compensation of dimensional tolerances• Height compensation up to 2 cm• Dual flush• Adjustable flushing volume• Fully insulated against condensation• Side connection on left or right• Water supply connection at the bottom left or right• Water connection at the rear centre• Ceramics fastening M12, fastening distance 18 cm
Product Details
Scope Of Delivery
• Water supply connection set with angle stop valve• WC outlet pipe, HDPE, dia. 90 mm • Adapter sleeve, dia. 90/110 mm • Flush pipe 23 x 23 cm, dia. 50/44 mm• 2 threaded rods M12 for ceramics fastening• Acoustical insulation set• Fastening material
Ordering Information
Height x Width x Depth 114,5 x 50,5 x 10,6 cm
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 6 and 3 l
Flush range large 4.5 / 6 l
Article no. Colour
131.031.SI.1 white glass
131.031.SJ.1 black glass
131.031.SQ.1 umber glass
0
505
1145
25
R½
18
30
92−102
104
106
43
0
109
Height x Width x Depth 114,5 x 50,5 x 10,6 cm
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 6 and 3 l
Flush range large 4.5 / 6 l
Article no. Colour
131.032.SI.1 white glass
131.032.SJ.1 black glass
131.032.SQ.1 umber glass
0
505
R½
18
30
25
15
28
92−102
104
1145
106
455
25
0
109
72 Sanitary Systems Catalogue 2014/2015
Geberit MonolithMonolith sanitary modules for WC
Geberit Monolith Plus sanitary module for floor standing WC, H101 new
Application Purpose
• For replacing low level exposed cisterns• For replacing floor standing WC with close-coupled cistern• For use in floor outlet connections• For use in wall outlet connections, outlet height 18 cm• For mounting on finished floors• For installation as part of renovation work• For floor standing WC with P-bend and flush water inlet at 32 - 36 cm
height from floor (DIN EN 37)
Characteristics
• Sanitary module with front cladding made of toughened safety glass (ESG) and lateral cladding made of brushed aluminium
• Self-supporting• Compensation of dimensional tolerances• Height compensation up to 2 cm• Dual flush• Adjustable flushing volume• Fully insulated against condensation• Water supply connection at the bottom left or right• Soft-touch buttons for flush actuation and odour extraction• Orientation light and odour extraction activated when a user
approaches• Orientation light can be set in seven colours• User detection range adjustable• Day and night detection can be set for orientation light• Odour extraction unit with filtration integrated in the cistern• Odour extraction unit can be mounted without tools• Ceramic honeycomb filter for odour neutralisation can be replaced
without tools• Automatic switching off of the odour extraction unit after a predefined
running time• Operation with extra-low voltage – no mains voltage in the cistern• Mains connection with flexible three-wire plastic sheathed cable
Product Details
Scope Of Delivery
• Water supply connection set with 2 angle stop valves R 1/2 • Flush pipe 23 x 23 cm, dia. 50/44 mm• WC outlet bend, HDPE, dia. 90 mm• Adapter sleeve, dia. 90/110 mm • Rubber seal EPDM• Female socket for mains connection• Power supply unit• Fastening material for solid wall
Ordering Information
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 6 and 3 l
Flush range large 4.5 / 6 l
Nominal voltage 100–240 V AC
Mains frequency 50 - 60 Hz
Operating voltage 4.1 V DC
Power consumption 5 W
Protection class I
Protection degree IPx4
0
485
908R½
45 ±2
18 ±1
13 ±413 ±4
33
38
101 ±1
R½R½
106
0
Article no. Colour
131.201.SI.1 white glass
131.201.SJ.1 black glass
131.201.SQ.1 umber glass
Geberit MonolithMonolith sanitary modules for WC
Sanitary Systems Catalogue 2014/2015 73
Geberit Monolith Plus sanitary module for wall-hung WC and AquaClean Sela, H101 new
Application Purpose
• For replacing wall-hung WC with close-coupled cistern• For use in wall outlet connections, outlet height in excess of 23 cm• For mounting on finished floors• For installation as part of renovation work• For use with Geberit AquaClean Sela
Characteristics
• Sanitary module with front cladding made of toughened safety glass (ESG) and lateral cladding made of brushed aluminium
• Self-supporting• Compensation of dimensional tolerances• Height compensation up to 2 cm• Dual flush• Adjustable flushing volume• Fully insulated against condensation• Water supply connection at the bottom left or right• Soft-touch buttons for flush actuation and odour extraction• Orientation light and odour extraction activated when a user
approaches• Orientation light can be set in seven colours• User detection range adjustable• Day and night detection can be set for orientation light• Odour extraction unit with filtration integrated in the cistern• Odour extraction unit can be mounted without tools• Ceramic honeycomb filter for odour neutralisation can be replaced
without tools• Automatic switching off of the odour extraction unit after a predefined
running time• Operation with extra-low voltage – no mains voltage in the cistern• Mains connection with flexible three-wire plastic sheathed cable
Product Details
Scope Of Delivery
• Water supply connection set with 2 angle stop valves R 1/2 • Flush pipe 23 x 23 cm, dia. 50/44 mm• WC outlet pipe, HDPE, dia. 90 mm • Adapter sleeve, dia. 90/110 mm • 2 threaded rods M12 for ceramics fastening• Fastening material for solid wall• Acoustical insulation set• Female socket for mains connection• Power supply unit• Fastening material for wall-hung WC
Ordering Information
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 6 and 3 l
Flush range large 4.5 / 6 l
Nominal voltage 100–240 V AC
Mains frequency 50 - 60 Hz
Operating voltage 4.1 V DC
Power consumption 5 W
Protection class I
Protection degree IPx4
0
485
908R½
45 ±2
25 ±1
13 ±413 ±4
33
38
101 ±1
R½R½
18/23
106
0
43 ±2
Article no. Colour
131.221.SI.1 white glass
131.221.SJ.1 black glass
131.221.SQ.1 umber glass
74 Sanitary Systems Catalogue 2014/2015
Geberit MonolithMonolith sanitary modules for WC
Geberit Monolith Plus sanitary module for Geberit AquaClean 8000, H101 new
Application Purpose
• For replacing wall-hung WC with close-coupled cistern• For use in wall outlet connections, outlet height in excess of 23 cm• For mounting on finished floors• For installation as part of renovation work
Characteristics
• Sanitary module with front cladding made of toughened safety glass (ESG) and lateral cladding made of brushed aluminium
• Self-supporting• Compensation of dimensional tolerances• Height compensation up to 2 cm• Dual flush• Adjustable flushing volume• Fully insulated against condensation• Water supply connection at the bottom left or right• Soft-touch buttons for flush actuation and odour extraction• Orientation light and odour extraction activated when a user
approaches• Orientation light can be set in seven colours• User detection range adjustable• Day and night detection can be set for orientation light• Odour extraction unit with filtration integrated in the cistern• Odour extraction unit can be mounted without tools• Ceramic honeycomb filter for odour neutralisation can be replaced
without tools• Automatic switching off of the odour extraction unit after a predefined
running time• Operation with extra-low voltage – no mains voltage in the cistern• Mains connection with flexible three-wire plastic sheathed cable
Product Details
Scope Of Delivery
• Water supply connection set with 2 angle stop valves R 1/2 • Flush pipe 23 x 23 cm, dia. 50/44 mm• WC outlet pipe, HDPE, dia. 90 mm • Adapter sleeve, dia. 90/110 mm • 2 threaded rods M12 for ceramics fastening• Acoustical insulation set• Fastening material for solid wall• Fastening material for wall-hung WC
Ordering Information
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 6 and 3 l
Flush range large 4.5 / 6 l
Nominal voltage 100–240 V AC
Mains frequency 50 - 60 Hz
Operating voltage 4.1 V DC
Power consumption 5 W
Protection class I
Protection degree IPx4
28
15
180
485
908R½
45 ±2101 ±1
25 ±1
13 ±413 ±4
106
455
0
25
Article no. Colour
131.224.SI.1 white glass
131.224.SJ.1 black glass
131.224.SQ.1 umber glass
Geberit MonolithMonolith sanitary modules for WC
Sanitary Systems Catalogue 2014/2015 75
Geberit Monolith Plus sanitary modules for floor standing WC, H114 new
Application Purpose
• For replacing floor standing WC with flushing valve• For replacing floor standing WC with close-coupled cistern• For replacing floor standing WC with concealed cistern• For use in floor outlet connections• For use in wall outlet connections, outlet height 18 cm• For mounting on finished floors• For installation in renovations, conversions and new buildings• For installing in front of a solid wall
Characteristics
• Sanitary module with front cladding made of toughened safety glass (ESG) and lateral cladding made of brushed aluminium
• Self-supporting• Compensation of dimensional tolerances• Height compensation up to 2 cm• Dual flush• Adjustable flushing volume• Fully insulated against condensation• Water connection at the rear centre• Soft-touch buttons for flush actuation and odour extraction• Orientation light and odour extraction activated when a user
approaches• Orientation light can be set in seven colours• User detection range adjustable• Day and night detection can be set for orientation light• Odour extraction unit with filtration integrated in the cistern• Odour extraction unit can be mounted without tools• Ceramic honeycomb filter for odour neutralisation can be replaced
without tools• Automatic switching off of the odour extraction unit after a predefined
running time• Operation with extra-low voltage – no mains voltage in the cistern• Mains connection with flexible three-wire plastic sheathed cable
Product Details
Scope Of Delivery
• Water supply connection set with angle stop valve• Flush pipe 23 x 23 cm, dia. 50/44 mm• P-bend, PP, dia. 90 mm • Adapter sleeve, dia. 90/110 mm • Rubber seal EPDM
• Female socket for mains connection• Power supply unit• Fastening material
Ordering Information
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 6 and 3 l
Flush range large 4.5 / 6 l
Nominal voltage 100–240 V AC
Mains frequency 50 - 60 Hz
Operating voltage 4.1 V DC
Power consumption 5 W
Protection class I
Protection degree IPx4
0
505
R½R½18 ±1
45 ±2 13 ±413 ±4 1145 ±1
33
38
32–36
106
0
109
Article no. Colour
131.233.SI.1 white glass
131.233.SJ.1 black glass
131.233.SQ.1 umber glass
76 Sanitary Systems Catalogue 2014/2015
Geberit MonolithMonolith sanitary modules for WC
Geberit Monolith Plus sanitary module for wall-hung WC and AquaClean Sela, H114 new
Application Purpose
• For replacing wall-hung WC with flushing valve• For replacing wall-hung WC with close-coupled cistern• For replacement of wall-hung WC with concealed cistern with
maximum service opening < 109 cm• For use in wall outlet connections, outlet height in excess of 23 cm• For mounting on finished floors• For installation in renovations, conversions and new buildings• For installing in front of a solid wall• For use with Geberit AquaClean Sela
Characteristics
• Sanitary module with front cladding made of toughened safety glass (ESG) and lateral cladding made of brushed aluminium
• Self-supporting• Compensation of dimensional tolerances• Height compensation up to 2 cm• Dual flush• Adjustable flushing volume• Fully insulated against condensation• Water connection at the rear centre• Ceramics fastening M12, fastening distance 18 cm• Soft-touch buttons for flush actuation and odour extraction• Orientation light and odour extraction activated when a user
approaches• Orientation light can be set in seven colours• User detection range adjustable• Day and night detection can be set for orientation light• Odour extraction unit with filtration integrated in the cistern• Odour extraction unit can be mounted without tools• Ceramic honeycomb filter for odour neutralisation can be replaced
without tools• Automatic switching off of the odour extraction unit after a predefined
running time• Operation with extra-low voltage – no mains voltage in the cistern• Mains connection with flexible three-wire plastic sheathed cable
Product Details
Scope Of Delivery
• Water supply connection set with angle stop valve• WC outlet pipe, HDPE, dia. 90 mm • Adapter sleeve, dia. 90/110 mm
• Flush pipe 23 x 23 cm, dia. 50/44 mm• 2 threaded rods M12 for ceramics fastening• Acoustical insulation set• Female socket for mains connection• Power supply unit• Fastening material
Ordering Information
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 6 and 3 l
Flush range large 4.5 / 6 l
Nominal voltage 100–240 V AC
Mains frequency 50 - 60 Hz
Operating voltage 4.1 V DC
Power consumption 5 W
Protection class I
Protection degree IPx4
0
505
25 ±1
1145 ±1
18
45 ±213 ±413 ±4
33
38
R½R½
106
0
109
43 ±2Article no. Colour
131.231.SI.1 white glass
131.231.SJ.1 black glass
131.231.SQ.1 umber glass
Geberit MonolithMonolith sanitary modules for bidet
Sanitary Systems Catalogue 2014/2015 77
Geberit Monolith Plus sanitary module for Geberit AquaClean 8000, H114 new
Application Purpose
• For replacing wall-hung WC with flushing valve• For replacing wall-hung WC with close-coupled cistern• For replacement of wall-hung WC with concealed cistern with
maximum service opening < 109 cm• For use in wall outlet connections, outlet height in excess of 23 cm• For mounting on finished floors• For installation in renovations, conversions and new buildings• For installing in front of a solid wall• For use with Geberit AquaClean 8000
Characteristics
• Sanitary module with front cladding made of toughened safety glass (ESG) and lateral cladding made of brushed aluminium
• Self-supporting• Compensation of dimensional tolerances• Height compensation up to 2 cm• Dual flush• Adjustable flushing volume• Fully insulated against condensation• Side connection on left or right• Water supply connection at the bottom left or right• Water connection at the rear centre• Ceramics fastening M12, fastening distance 18 cm• Soft-touch buttons for flush actuation and odour extraction• Orientation light and odour extraction activated when a user
approaches• Orientation light can be set in seven colours• User detection range adjustable• Day and night detection can be set for orientation light• Odour extraction unit with filtration integrated in the cistern• Odour extraction unit can be mounted without tools• Ceramic honeycomb filter for odour neutralisation can be replaced
without tools• Automatic switching off of the odour extraction unit after a predefined
running time• Operation with extra-low voltage – no mains voltage in the cistern• Mains connection with flexible three-wire plastic sheathed cable
Product Details
Scope Of Delivery
• Water supply connection set with angle stop valve• WC outlet pipe, HDPE, dia. 90 mm
• Adapter sleeve, dia. 90/110 mm • Flush pipe 23 x 23 cm, dia. 50/44 mm• 2 threaded rods M12 for ceramics fastening• Acoustical insulation set• Fastening material
Ordering Information
Monolith sanitary modules for bidet
Geberit Monolith sanitary module for bidet
Application Purpose
• For replacing wall-hung bidet• For mounting on finished floors• For installation in renovations, conversions and new buildings• For use in wall inlet connections• For installing pedestal and wall-hung bidets
Characteristics
• Sanitary module with front cladding made of toughened safety glass (ESG) and lateral cladding made of brushed aluminium
• Self-supporting• Compensation of dimensional tolerances• Height compensation up to 2 cm• Water supply connection at the bottom left or right• Wall inlet connection height: 8 - 21 cm from finished floor• Fastening distance of bidet 18 cm
Product Details
Scope Of Delivery
• Element for bidet with front and side cladding• Fastening material for solid wall• Water supply connection set• 2 feet
Ordering Information
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 6 and 3 l
Flush range large 4.5 / 6 l
Nominal voltage 100–240 V AC
Mains frequency 50 - 60 Hz
Operating voltage 4.1 V DC
Power consumption 5 W
Protection class I
Protection degree IPx4
0
505
R½
15
28
25 ±1
1145 ±1
18
45 ±213 ±413 ±4
106
109
455
25
0
Article no. Colour
131.232.SI.1 white glass
131.232.SJ.1 black glass
131.232.SQ.1 umber glass
Monolith sanitary modules for bidet
Height x Width x Depth 101 x 48,5 x 10,6 cm
Article no. Colour
131.030.SI.1 white glass
131.030.SJ.1 black glass
131.030.SQ.1 umber glass
0
485
10118
106
0
78 Sanitary Systems Catalogue 2014/2015
Geberit MonolithMonolith sanitary module for washbasin
Monolith sanitary module for washbasin
Geberit Monolith sanitary module for wall-hung washbasin and wall-mounted tap depth gauge 10 cm, drawer left
Application Purpose
• For wall-hung washbasins with a width of up to 70 cm• For wall-hung washbasins, bowl centred, with a width of up to 55 cm,
with double towel rail• For wall-hung washbasins, bowl at the side, with a width of up to
64 cm, with double towel rail• For replacing wall-hung washbasins• For mounting on finished floors• For use in wall inlet connections• For installation in renovations, conversions and new buildings• For two-hole taps with 10 cm depth gauge and mixer on the right• For concealed wall-mounted taps from Dornbracht, Hansa,
Hansgrohe, KWC and Villeroy & Boch
Characteristics
• Sanitary module with front cladding made of toughened safety glass (ESG) and lateral cladding made of brushed aluminium
• Connection to drinking water supply integrated• Trap with infinitely height-adjustable inlet pipe integrated• Waste plug infinitely height-adjustable• Integrated fastening rail for fastening washbasins and double towel rail• Galvanized leg supports, adjustable, premounted• Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45 - 60 cm from finished floor• Water supply connection height: 50 - 65 cm from finished floor • Distance from element centre to angle stop valve 4 - 8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 13 - 31 cm, enlargeable to 45 cm• Wall-mounted tap height: 104 cm from finished floor• Preposistioned retainer for tap connection to 2-hole wall-mounted
taps• Drawer that can be pulled out at the sides, with mechanical opening
support
Product Details
Scope Of Delivery
• Washbasin element with front and side cladding• Fastening material for solid wall• Extension left with telescopic slide• Mounting plate for mixer• Water supply connection set with 2 reinforced braided hoses,
2 connection bends 90° Rp 1/2 and G 3/8 and 2 angle stop valves R 1/2
• Washbasin trap with outlet pipe and union nut G 1-1/4• 2 outlet pipes (dia. 32 mm and dia. 40 mm)• Set of seals• Cover profile for fastening rail
Ordering Information
Monolith sanitary module for washbasin
Height x Width x Depth 114,5 x 73,2 x 10,7 cm
Operating pressure 1 - 10 bar
Maximum operating temperature 80 °C
Maximum operating temperature water, short-term
90 °C
815
732
104
1145
13−45
8−16
0−2310
≥ 30
R½
45−60545−685
0
39
85−235
50−65R½
87
109
60
30
55
64
Article no. Colour
131.040.SI.1 white glass
131.040.SJ.1 black glass
131.040.SQ.1 umber glass
Geberit MonolithMonolith sanitary module for washbasin
Sanitary Systems Catalogue 2014/2015 79
Geberit Monolith sanitary module for wall-hung washbasin and wall-mounted tap depth gauge 10 cm, drawer right
Application Purpose
• For wall-hung washbasins with a width of up to 70 cm• For wall-hung washbasins, bowl centred, with a width of up to 55 cm,
with double towel rail• For wall-hung washbasins, bowl at the side, with a width of up to
64 cm, with double towel rail• For replacing wall-hung washbasins• For mounting on finished floors• For use in wall inlet connections• For installation in renovations, conversions and new buildings• For two-hole taps with 10 cm depth gauge and mixer on the right• For concealed wall-mounted taps from Dornbracht, Hansa,
Hansgrohe, KWC and Villeroy & Boch
Characteristics
• Sanitary module with front cladding made of toughened safety glass (ESG) and lateral cladding made of brushed aluminium
• Connection to drinking water supply integrated• Trap with infinitely height-adjustable inlet pipe integrated• Waste plug infinitely height-adjustable• Integrated fastening rail for fastening washbasins and double towel rail• Galvanized leg supports, adjustable, premounted• Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45 - 60 cm from finished floor• Water supply connection height: 50 - 65 cm from finished floor • Distance from element centre to angle stop valve 4 - 8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 13 - 31 cm, enlargeable to 45 cm• Wall-mounted tap height: 104 cm from finished floor• Preposistioned retainer for tap connection to 2-hole wall-mounted
taps• Drawer that can be pulled out at the sides, with mechanical opening
support
Product Details
Scope Of Delivery
• Washbasin element with front and side cladding• Fastening material for solid wall• Extension right with telescopic slide• Mounting plate for mixer• Water supply connection set with 2 reinforced braided hoses,
2 connection bends 90° Rp 1/2 and G 3/8 and 2 angle stop valves R 1/2
• Washbasin trap with outlet pipe and union nut G 1-1/4• 2 outlet pipes (dia. 32 mm and dia. 40 mm)• Set of seals• Cover profile for fastening rail
Ordering Information
Height x Width x Depth 114,5 x 73,2 x 10,7 cm
Operating pressure 1 - 10 bar
Maximum operating temperature 80 °C
Maximum operating temperature water, short-term
90 °C
815
732
104
1145
13−45
8−16
0−2310
≥ 30
R½
45−60545−685
0
39
85−235
50−65R½
87
109
60
30
55
64
Article no. Colour
131.041.SI.1 white glass
131.041.SJ.1 black glass
131.041.SQ.1 umber glass
80 Sanitary Systems Catalogue 2014/2015
Geberit MonolithMonolith sanitary module for washbasin
Geberit Monolith sanitary module for wall-hung washbasin and wall-mounted tap depth gauge 10 cm, drawer left and right
Application Purpose
• For wall-hung washbasins with a width of up to 70 cm• For wall-hung washbasins, bowl centred, with a width of up to 55 cm,
with double towel rail• For wall-hung washbasins, bowl at the side, with a width of up to
64 cm, with double towel rail• For replacing wall-hung washbasins• For mounting on finished floors• For use in wall inlet connections• For installation in renovations, conversions and new buildings• For two-hole taps with 10 cm depth gauge and mixer on the right• For concealed wall-mounted taps from Dornbracht, Hansa,
Hansgrohe, KWC and Villeroy & Boch
Characteristics
• Sanitary module with front cladding made of toughened safety glass (ESG) and lateral cladding made of brushed aluminium
• Connection to drinking water supply integrated• Trap with infinitely height-adjustable inlet pipe integrated• Waste plug infinitely height-adjustable• Integrated fastening rail for fastening washbasins and double towel rail• Galvanized leg supports, adjustable, premounted• Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45 - 60 cm from finished floor• Water supply connection height: 50 - 65 cm from finished floor • Distance from element centre to angle stop valve 4 - 8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 13 - 31 cm, enlargeable to 45 cm• Wall-mounted tap height: 104 cm from finished floor• Preposistioned retainer for tap connection to 2-hole wall-mounted
taps• Drawers that can be pulled out at the sides, with mechanical opening
support
Product Details
Scope Of Delivery
• Washbasin element with front and side cladding• Fastening material for solid wall• Mounting plate for mixer• Water supply connection set with 2 reinforced braided hoses,
2 connection bends 90° Rp 1/2 and G 3/8 and 2 angle stop valves R 1/2
• 2 extensions (left and right) with telescopic slide• Washbasin trap with outlet pipe and union nut G 1-1/4• 2 outlet pipes (dia. 32 mm and dia. 40 mm)• Set of seals• Cover profile for fastening rail
Ordering Information
Height x Width x Depth 114,5 x 73,2 x 10,7 cm
Operating pressure 1 - 10 bar
Maximum operating temperature 80 °C
Maximum operating temperature water, short-term
90 °C
815
732
104
1145
13−45
8−16
0−2310
≥ 30
R½
45−60545−685
0
39
85−235
50−65R½
87
109
60
30
55
64
Article no. Colour
131.042.SI.1 white glass
131.042.SJ.1 black glass
131.042.SQ.1 umber glass
Geberit MonolithMonolith sanitary module for washbasin
Sanitary Systems Catalogue 2014/2015 81
Geberit Monolith sanitary module for wall-hung washbasin and wall-mounted tap depth gauge 10 cm, without drawer
Application Purpose
• For wall-hung washbasins with a width of up to 70 cm• For wall-hung washbasins, bowl centred, with a width of up to 55 cm,
with double towel rail• For wall-hung washbasins, bowl at the side, with a width of up to
64 cm, with double towel rail• For replacing wall-hung washbasins• For mounting on finished floors• For use in wall inlet connections• For installation in renovations, conversions and new buildings• For two-hole taps with 10 cm depth gauge and mixer on the right• For concealed wall-mounted taps from Dornbracht, Hansa,
Hansgrohe, KWC and Villeroy & Boch
Characteristics
• Sanitary module with front cladding made of toughened safety glass (ESG) and lateral cladding made of brushed aluminium
• Connection to drinking water supply integrated• Trap with infinitely height-adjustable inlet pipe integrated• Waste plug infinitely height-adjustable• Integrated fastening rail for fastening washbasins and double towel rail• Galvanized leg supports, adjustable, premounted• Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45 - 60 cm from finished floor• Water supply connection height: 50 - 65 cm from finished floor • Distance from element centre to angle stop valve 4 - 8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 13 - 31 cm, enlargeable to 45 cm• Wall-mounted tap height: 104 cm from finished floor• Preposistioned retainer for tap connection to 2-hole wall-mounted
taps
Product Details
Scope Of Delivery
• Washbasin element with front and side cladding• Fastening material for solid wall• Mounting plate for mixer• Water supply connection set with 2 reinforced braided hoses,
2 connection bends 90° Rp 1/2 and G 3/8 and 2 angle stop valves R 1/2
• Washbasin trap with outlet pipe and union nut G 1-1/4• 2 outlet pipes (dia. 32 mm and dia. 40 mm)• Set of seals• Cover profile for fastening rail
Ordering Information
Height x Width x Depth 114,5 x 73,2 x 10,7 cm
Operating pressure 1 - 10 bar
Maximum operating temperature 80 °C
Maximum operating temperature water, short-term
90 °C
815
732
104
1145
13−45
8−16
10
R½
45−60545−685
0
39
85−235
50−65R½
87
109
60
30
55
64
Article no. Colour
131.043.SI.1 white glass
131.043.SJ.1 black glass
131.043.SQ.1 umber glass
82 Sanitary Systems Catalogue 2014/2015
Geberit MonolithMonolith sanitary module for washbasin
Geberit Monolith sanitary module for wall-hung washbasin and wall-mounted tap depth gauge 8 cm, drawer left
Application Purpose
• For wall-hung washbasins with a width of up to 70 cm• For wall-hung washbasins, bowl centred, with a width of up to 55 cm,
with double towel rail• For wall-hung washbasins, bowl at the side, with a width of up to
64 cm, with double towel rail• For replacing wall-hung washbasins• For mounting on finished floors• For use in wall inlet connections• For installation in renovations, conversions and new buildings• For use with wall-mounted taps from Vola, with mixer on the left
Characteristics
• Sanitary module with front cladding made of toughened safety glass (ESG) and lateral cladding made of brushed aluminium
• Connection to drinking water supply integrated• Trap with infinitely height-adjustable inlet pipe integrated• Waste plug infinitely height-adjustable• Integrated fastening rail for fastening washbasins and double towel rail• Galvanized leg supports, adjustable, premounted• Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45 - 60 cm from finished floor• Water supply connection height: 50 - 65 cm from finished floor • Distance from element centre to angle stop valve 4 - 8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 13 - 31 cm, enlargeable to 45 cm• Wall-mounted tap height: 104 cm from finished floor• Preposistioned retainer for tap connection to 2-hole wall-mounted
taps• Drawer that can be pulled out at the sides, with mechanical opening
support
Product Details
Scope Of Delivery
• Washbasin element with front and side cladding• Fastening material for solid wall• Extension left with telescopic slide• Mounting plate for mixer• Water supply connection set with 2 reinforced braided hoses,
2 connection bends 90° Rp 1/2 and G 3/8 and 2 angle stop valves R 1/2
• Washbasin trap with outlet pipe and union nut G 1-1/4• 2 outlet pipes (dia. 32 mm and dia. 40 mm)• Set of seals• Cover profile for fastening rail
Ordering Information
Height x Width x Depth 114,5 x 73,2 x 10,7 cm
Operating pressure 1 - 10 bar
Maximum operating temperature 80 °C
Maximum operating temperature water, short-term
90 °C
815
732
104
1145
13−45
8−16
0−238
≥ 30
R½
45−60545−685
0
39
85−235
50−65R½
87
109
60
30
55
64
Article no. Colour
131.044.SI.1 white glass
131.044.SJ.1 black glass
131.044.SQ.1 umber glass
Geberit MonolithMonolith sanitary module for washbasin
Sanitary Systems Catalogue 2014/2015 83
Geberit Monolith sanitary module for wall-hung washbasin and wall-mounted tap depth gauge 8 cm, drawer right
Application Purpose
• For replacing wall-hung washbasins• For mounting on finished floors• For use in wall inlet connections• For installation in renovations, conversions and new buildings• For use with wall-mounted taps from Vola, with mixer on the left• For wall-hung washbasins with a width of up to 70 cm• For wall-hung washbasins, bowl centred, with a width of up to 55 cm,
with double towel rail• For wall-hung washbasins, bowl at the side, with a width of up to
64 cm, with double towel rail
Characteristics
• Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45 - 60 cm from finished floor• Water supply connection height: 50 - 65 cm from finished floor • Distance from element centre to angle stop valve 4 - 8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 13 - 31 cm, enlargeable to 45 cm• Wall-mounted tap height: 104 cm from finished floor• Preposistioned retainer for tap connection to 2-hole wall-mounted
taps• Connection to drinking water supply integrated• Trap with infinitely height-adjustable inlet pipe integrated• Waste plug infinitely height-adjustable• Integrated fastening rail for fastening washbasins and double towel rail• Galvanized leg supports, adjustable, premounted• Sanitary module with front cladding made of toughened safety glass
(ESG) and lateral cladding made of brushed aluminium • Drawer that can be pulled out at the sides, with mechanical opening
support
Product Details
Scope Of Delivery
• Washbasin element with front and side cladding• Fastening material for solid wall• Extension right with telescopic slide• Mounting plate for mixer• Water supply connection set with 2 reinforced braided hoses,
2 connection bends 90° Rp 1/2 and G 3/8 and 2 angle stop valves R 1/2
• Washbasin trap with outlet pipe and union nut G 1-1/4• 2 outlet pipes (dia. 32 mm and dia. 40 mm)• Set of seals• Cover profile for fastening rail
Ordering Information
Operating pressure 1 - 10 bar
Maximum operating temperature 80 °C
Maximum operating temperature water, short-term
90 °C
Height x Width x Depth 114,5 x 73,2 x 10,7 cm
815
732
104
1145
13−45
8−16
0−23
≥ 30
8
R½
45−60545−685
0
39
85−235
50−65R½
87 109
60
30
55
64
Article no. Colour
131.045.SI.1 white glass
131.045.SJ.1 black glass
131.045.SQ.1 umber glass
84 Sanitary Systems Catalogue 2014/2015
Geberit MonolithMonolith sanitary module for washbasin
Geberit Monolith sanitary module for wall-hung washbasin and wall-mounted tap depth gauge 8 cm, drawer left and right
Application Purpose
• For replacing wall-hung washbasins• For mounting on finished floors• For use in wall inlet connections• For installation in renovations, conversions and new buildings• For use with wall-mounted taps from Vola, with mixer on the left• For wall-hung washbasins with a width of up to 70 cm• For wall-hung washbasins, bowl centred, with a width of up to 55 cm,
with double towel rail• For wall-hung washbasins, bowl at the side, with a width of up to
64 cm, with double towel rail
Characteristics
• Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45 - 60 cm from finished floor• Water supply connection height: 50 - 65 cm from finished floor • Distance from element centre to angle stop valve 4 - 8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 13 - 31 cm, enlargeable to 45 cm• Wall-mounted tap height: 104 cm from finished floor• Preposistioned retainer for tap connection to 2-hole wall-mounted
taps• Connection to drinking water supply integrated• Trap with infinitely height-adjustable inlet pipe integrated• Waste plug infinitely height-adjustable• Integrated fastening rail for fastening washbasins and double towel rail• Galvanized leg supports, adjustable, premounted• Sanitary module with front cladding made of toughened safety glass
(ESG) and lateral cladding made of brushed aluminium • Drawers that can be pulled out at the sides, with mechanical opening
support
Product Details
Scope Of Delivery
• Washbasin element with front and side cladding• Fastening material for solid wall• 2 extensions (left and right) with telescopic slide• Mounting plate for mixer• Water supply connection set with 2 reinforced braided hoses,
2 connection bends 90° Rp 1/2 and G 3/8 and 2 angle stop valves R 1/2
• Washbasin trap with outlet pipe and union nut G 1-1/4• 2 outlet pipes (dia. 32 mm and dia. 40 mm)• Set of seals• Cover profile for fastening rail
Ordering Information
Operating pressure 1 - 10 bar
Maximum operating temperature 80 °C
Maximum operating temperature water, short-term
90 °C
Height x Width x Depth 114,5 x 73,2 x 10,7 cm
815
732
104
1145
13−45
8−16
0−238
≥ 30
R½
45−60545−685
0
39
85−235
50−65R½
87
109
60
30
55
64
Article no. Colour
131.046.SI.1 white glass
131.046.SJ.1 black glass
131.046.SQ.1 umber glass
Geberit MonolithMonolith sanitary module for washbasin
Sanitary Systems Catalogue 2014/2015 85
Geberit Monolith sanitary module for wall-hung washbasin and wall-mounted tap depth gauge 8 cm, without drawer
Application Purpose
• For replacing wall-hung washbasins• For mounting on finished floors• For use in wall inlet connections• For installation in renovations, conversions and new buildings• For use with wall-mounted taps from Vola, with mixer on the left• For wall-hung washbasins with a width of up to 70 cm• For wall-hung washbasins, bowl centred, with a width of up to 55 cm,
with double towel rail• For wall-hung washbasins, bowl at the side, with a width of up to
64 cm, with double towel rail
Characteristics
• Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45 - 60 cm from finished floor• Water supply connection height: 50 - 65 cm from finished floor • Distance from element centre to angle stop valve 4 - 8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 13 - 31 cm, enlargeable to 45 cm• Wall-mounted tap height: 104 cm from finished floor• Preposistioned retainer for tap connection to 2-hole wall-mounted
taps• Connection to drinking water supply integrated• Trap with infinitely height-adjustable inlet pipe integrated• Waste plug infinitely height-adjustable• Integrated fastening rail for fastening washbasins and double towel rail• Galvanized leg supports, adjustable, premounted• Sanitary module with front cladding made of toughened safety glass
(ESG) and lateral cladding made of brushed aluminium
Product Details
Scope Of Delivery
• Washbasin element with front and side cladding• Fastening material for solid wall• Mounting plate for mixer• Water supply connection set with 2 reinforced braided hoses,
2 connection bends 90° Rp 1/2 and G 3/8 and 2 angle stop valves R 1/2
• Washbasin trap with outlet pipe and union nut G 1-1/4• 2 outlet pipes (dia. 32 mm and dia. 40 mm)• Set of seals• Cover profile for fastening rail
Ordering Information
Operating pressure 1 - 10 bar
Maximum operating temperature 80 °C
Maximum operating temperature water, short-term
90 °C
Height x Width x Depth 114,5 x 73,2 x 10,7 cm
815
732
104
1145
13−45
8−16
8
R½
45−60545−685
0
39
85−235
50−65R½
87
109
60
30
55
64
Article no. Colour
131.047.SI.1 white glass
131.047.SJ.1 black glass
131.047.SQ.1 umber glass
86 Sanitary Systems Catalogue 2014/2015
Geberit MonolithMonolith sanitary module for washbasin
Geberit Monolith sanitary module for wall-hung washbasin and deck-mounted tap, drawer left
Application Purpose
• For wall-hung washbasins with a width of up to 70 cm• For wall-hung washbasins, bowl centred, with a width of up to 55 cm,
with double towel rail• For wall-hung washbasins, bowl at the side, with a width of up to
64 cm, with double towel rail• For replacing wall-hung washbasins• For mounting on finished floors• For use in wall inlet connections• For installation in renovations, conversions and new buildings• For use with deck-mounted taps
Characteristics
• Connection to drinking water supply integrated• Trap with infinitely height-adjustable inlet pipe integrated• Waste plug infinitely height-adjustable• Integrated fastening rail for fastening washbasins and double towel rail• Galvanized leg supports, adjustable, premounted• Sanitary module with front cladding made of toughened safety glass
(ESG) and lateral cladding made of brushed aluminium • Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45 - 60 cm from finished floor• Water supply connection height: 50 - 65 cm from finished floor • Distance from element centre to angle stop valve 4 - 8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 13 - 31 cm, enlargeable to 45 cm• Drawer that can be pulled out at the sides, with mechanical opening
support
Product Details
Scope Of Delivery
• Washbasin element with front and side cladding• Fastening material for solid wall• Extension left with telescopic slide• 2 angle stop valves R 1/2"• Washbasin trap with outlet pipe and union nut G 1-1/4• 2 outlet pipes (dia. 32 mm and dia. 40 mm)• Set of seals• Cover profile for fastening rail• Extension to valve
Ordering Information
Height x Width x Depth 114,5 x 73,2 x 10,7 cm
Operating pressure 1 - 10 bar
Maximum operating temperature 80 °C
Maximum operating temperature water, short-term
90 °C
815
732
1145
13−45
8−16
0−23
≥ 30
R½
45−53545−615
39
85−235
50−65R½
0
87
109
60
30
55
64
Article no. Colour
131.048.SI.1 white glass
131.048.SJ.1 black glass
131.048.SQ.1 umber glass
Geberit MonolithMonolith sanitary module for washbasin
Sanitary Systems Catalogue 2014/2015 87
Geberit Monolith sanitary module for wall-hung washbasin and deck-mounted tap, drawer right
Application Purpose
• For wall-hung washbasins with a width of up to 70 cm• For wall-hung washbasins, bowl centred, with a width of up to 55 cm,
with double towel rail• For wall-hung washbasins, bowl at the side, with a width of up to
64 cm, with double towel rail• For replacing wall-hung washbasins• For mounting on finished floors• For use in wall inlet connections• For installation in renovations, conversions and new buildings• For use with deck-mounted taps
Characteristics
• Connection to drinking water supply integrated• Trap with infinitely height-adjustable inlet pipe integrated• Waste plug infinitely height-adjustable• Integrated fastening rail for fastening washbasins and double towel rail• Galvanized leg supports, adjustable, premounted• Sanitary module with front cladding made of toughened safety glass
(ESG) and lateral cladding made of brushed aluminium • Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45 - 60 cm from finished floor• Water supply connection height: 50 - 65 cm from finished floor • Distance from element centre to angle stop valve 4 - 8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 13 - 31 cm, enlargeable to 45 cm• Drawer that can be pulled out at the sides, with mechanical opening
support
Product Details
Scope Of Delivery
• Washbasin element with front and side cladding• Fastening material for solid wall• Extension right with telescopic slide• 2 angle stop valves R 1/2"• Washbasin trap with outlet pipe and union nut G 1-1/4• 2 outlet pipes (dia. 32 mm and dia. 40 mm)• Set of seals• Cover profile for fastening rail• Extension to valve
Ordering Information
Height x Width x Depth114,5 x 73,2 x 10,7 cm
Operating pressure 1 - 10 bar
Maximum operating temperature 80 °C
Maximum operating temperature water, short-term
90 °C
815
732
1145
13−45
8−16
0−23
≥ 30
R½
45−53545−615
39
85−235
50−65R½
0
87
109
60
30
55
64
Article no. Colour
131.049.SI.1 white glass
131.049.SJ.1 black glass
131.049.SQ.1 umber glass
88 Sanitary Systems Catalogue 2014/2015
Geberit MonolithMonolith sanitary module for washbasin
Geberit Monolith sanitary module for wall-hung washbasin and deck-mounted tap, drawer left and right
Application Purpose
• For wall-hung washbasins with a width of up to 70 cm• For wall-hung washbasins, bowl centred, with a width of up to 55 cm,
with double towel rail• For wall-hung washbasins, bowl at the side, with a width of up to
64 cm, with double towel rail• For replacing wall-hung washbasins• For mounting on finished floors• For use in wall inlet connections• For installation in renovations, conversions and new buildings• For use with deck-mounted taps
Characteristics
• Connection to drinking water supply integrated• Trap with infinitely height-adjustable inlet pipe integrated• Waste plug infinitely height-adjustable• Integrated fastening rail for fastening washbasins and double towel rail• Galvanized leg supports, adjustable, premounted• Sanitary module with front cladding made of toughened safety glass
(ESG) and lateral cladding made of brushed aluminium • Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45 - 60 cm from finished floor• Water supply connection height: 50 - 65 cm from finished floor • Distance from element centre to angle stop valve 4 - 8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 13 - 31 cm, enlargeable to 45 cm• Drawers that can be pulled out at the sides, with mechanical opening
support
Product Details
Scope Of Delivery
• Washbasin element with front and side cladding• Fastening material for solid wall• 2 extensions (left and right) with telescopic slide• 2 angle stop valves R 1/2"• Washbasin trap with outlet pipe and union nut G 1-1/4• 2 outlet pipes (dia. 32 mm and dia. 40 mm)• Set of seals• Cover profile for fastening rail• Extension to valve
Ordering Information
Height x Width x Depth 114,5 x 73,2 x 10,7 cm
Operating pressure 1 - 10 bar
Maximum operating temperature 80 °C
Maximum operating temperature water, short-term
90 °C
815
732
1145
13−45
8−16
0−23
≥ 30
R½
45−53545−615
39
85−235
50−65R½
0
87
109
60
30
55
64
Article no. Colour
131.050.SI.1 white glass
131.050.SJ.1 black glass
131.050.SQ.1 umber glass
Geberit MonolithAccessories for wall-hung washbasin
Sanitary Systems Catalogue 2014/2015 89
Geberit Monolith sanitary module for wall-hung washbasin and wall-mounted tap, without drawer
Application Purpose
• For wall-hung washbasins with a width of up to 70 cm• For wall-hung washbasins, bowl centred, with a width of up to 55 cm,
with double towel rail• For wall-hung washbasins, bowl at the side, with a width of up to
64 cm, with double towel rail• For replacing wall-hung washbasins• For mounting on finished floors• For use in wall inlet connections• For installation in renovations, conversions and new buildings• For use with deck-mounted taps
Characteristics
• Connection to drinking water supply integrated• Trap with infinitely height-adjustable inlet pipe integrated• Waste plug infinitely height-adjustable• Integrated fastening rail for fastening washbasins and double towel rail• Galvanized leg supports, adjustable, premounted• Sanitary module with front cladding made of toughened safety glass
(ESG) and lateral cladding made of brushed aluminium • Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45 - 60 cm from finished floor• Water supply connection height: 50 - 65 cm from finished floor • Distance from element centre to angle stop valve 4 - 8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 13 - 31 cm, enlargeable to 45 cm
Product Details
Scope Of Delivery
• Washbasin element with front and side cladding• Fastening material for solid wall• 2 angle stop valves R 1/2"• Washbasin trap with outlet pipe and union nut G 1-1/4• 2 outlet pipes (dia. 32 mm and dia. 40 mm)• Set of seals• Cover profile for fastening rail• Extension to valve
Ordering Information
Accessories for wall-hung washbasin
Water supply connection set to Geberit Monolith sanitary module for washbasin with wall-mounted tap
Scope Of Delivery
• Mounting plate for mixer• 2 connection bends• 3 metal-reinforced hoses• Rubber protector• Fastening material
Ordering Information
Water supply connection set to Geberit Monolith sanitary module for washbasin with deck-mounted tap
Scope Of Delivery
• 2 angle stop valves R 1/2"• Extension to valve
Ordering Information
Height x Width x Depth 114,5 x 73,2 x 10,7 cm
Operating pressure 1 - 10 bar
Maximum operating temperature 80 °C
Maximum operating temperature water, short-term
90 °C
815
732
1145
13−45
8−16
R½
45−53545−615
39
85−235
50−65R½
0
87
109
60
30
55
64
Article no. Colour
131.051.SI.1 white glass
131.051.SJ.1 black glass
131.051.SQ.1 umber glass
Accessories for Geberit Monolith sanitary module for wall-hung washbasin
Article no. Description
131.079.00.1Water supply connection set to Geberit Monolith sanitary module for washbasin with wall-mounted tap
Article no. Description
131.080.00.1Water supply connection set to Geberit Monolith sanitary module for washbasin with deck-mounted tap
90 Sanitary Systems Catalogue 2014/2015
Geberit MonolithAccessories for wall-hung washbasin
Washbasin trap for Monolith sanitary module for washbasin
Scope Of Delivery
• Outlet pipe, dia. 32 mm • Outlet pipe, dia. 40 mm • Outlet pipe with union nut G 1-1/4• Set of seals
Ordering Information
Set of fixing brackets for drywall for Monolith sanitary module for washbasin
Application Purpose
• For Geberit Monolith sanitary module for washbasins
Scope Of Delivery
• Set of 2• Fastening material
Ordering Information
Double towel rail to Geberit Monolith sanitary module for washbasin, length 34 cm
Characteristics
• Emco towel rail, series emcoloft• Chrome-plated• Length 34 cm
Ordering Information
Double towel rail to Geberit Monolith sanitary module for washbasin, length 44 cm
Characteristics
• Double towel rail, chrome-plated, emcoloft, 44 cm long• Chrome-plated• Length 44 cm
Ordering Information
Soap dispender for Geberit Monolith washbasin with drawers
• Application Purpose• For Geberit Monolith sanitary module for washbasin with drawer• Characteristics• Fastening in the drawer with magnetic tape
Ordering Information
Railing for Monolith washbasin with drawers
Application Purpose
• For Geberit Monolith sanitary module for washbasin with drawer• For upper, shorter drawer compartment• For lower, longer drawer compartments
Characteristics
• Fastening in the drawer with magnetic tape
Ordering Information
Article no. Description
131.087.00.1Washbasin trap for Monolith sanitary module for washbasin
Article no. Description
131.099.00.1Set of fixing brackets for drywall for Monolith sanitary module for washbasin
Article no. L[cm]
Colour
131.109.21.1 31 bright chrome-plated
Article no. L[cm]
Colour
131.110.21.1 41 bright chrome-plated
Article no. Description
131.119.00.1Soap dispender for Geberit Monolith washbasin with drawers
Article no. B[cm]
L[cm]
Colour
131.129.94.1 3,2 22 iron grey RAL 7011
131.137.94.1 3,2 15,9 iron grey RAL 7011
81112
159
L
B
Geberit MonolithAccessories for Geberit Monolith sanitary module
Sanitary Systems Catalogue 2014/2015 91
Accessories for Geberit Monolith sanitary module
Geberit Monolith water supply side connection set, 3/8"
Application Purpose
• For use with water supply connection on right/left side
Scope Of Delivery
• Angle stop valve R 1/2"• 2 cone screw fittings• Connection pipe• Connecting nipple, offset• Counter nut• Collar, chromium plated• Metal-reinforced hose R 3/8"• Fitting piece
Ordering Information
Geberit water supply connection set bottom for Geberit Monolith sanitary module for WC, H114
Scope Of Delivery
• Reinforced braided hose R 1/2"• Threaded socket 1/2“–3/8“
Ordering Information
Geberit Monolith connection set for floor standing WC with P-bend
Application Purpose
• For connecting floor standing WC to floor outlet
Scope Of Delivery
• P-bend, PP, dia. 90 mm • Adapter sleeve, dia. 90/110 mm • Rubber seal EPDM• Fastening material
Ordering Information
Geberit Monolith connection set for floor standing WC
• Application Purpose• For connecting floor standing WC to floor outlet
Scope Of Delivery
• WC outlet pipe, HDPE, dia. 90 mm • WC outlet bend, HDPE, dia. 90 mm• Adapter sleeve, dia. 90/110 mm • Rubber seal EPDM• Fastening material
Ordering Information
Accessories for Geberit Monolith sanitary module
Article no. Description
131.071.21.1Geberit Monolith water supply side connection set, 3/8"
Article no. Description
131.138.00.1Geberit water supply connection set bottom for Geberit Monolith sanitary module WC 114
Article no. Description
131.081.11.1Geberit Monolith connection set for floor standing WC with P-bend
Article no. Description
131.082.16.1 Geberit Monolith connection set for floor standing WC
105
263
2
15
92 Sanitary Systems Catalogue 2014/2015
Geberit MonolithAccessories for Geberit Monolith sanitary module
Geberit Monolith outlet pipe for floor standing WC
Application Purpose
• For connecting floor standing WC to wall outlet
Scope Of Delivery
• WC outlet pipe, HDPE, dia. 90 mm • Adapter sleeve, dia. 90/110 mm
Ordering Information
Geberit Monolith outlet pipe for wall-hung WC
Application Purpose
• For connecting wall-hung WC
Scope Of Delivery
• WC outlet pipe, HDPE, dia. 90 mm • Adapter sleeve, dia. 90/110 mm • Fastening material for wall-hung WC
Ordering Information
Geberit Monolith S-bend 90/110
Application Purpose
• For connecting wall-hung WC to floor outlet
Scope Of Delivery
• S-bend, PVC• WC outlet bend, HDPE, dia. 90 mm
Ordering Information
Geberit Monolith offset outlet pipe
Application Purpose
• For compensating the offset between the WC connection and the wall outlet
Scope Of Delivery
• WC outlet pipe, 3 cm offset, HDPE, dia. 90 mm• Connection sleeve
Ordering Information
Geberit Monolith offset outlet pipe
Application Purpose
• For conversion of floor standing WC with wall fixation to Monolith with wall-hung WC
• For laying of wall fixation 18 cm to 25 cm from finished floor
Scope Of Delivery
• Straight connector for WC, 7 cm offset, PP, dia. 90 mm• 2 connection sleeves
Ordering Information
Set of Geberit Monolith feet
Application Purpose
• For supporting Geberit Monolith sanitary modules on the floor for drywall construction and aerated concrete walls
Ordering Information
Article no. Description
131.083.16.1 Geberit Monolith outlet pipe for floor standing WC
Article no. Description
131.084.16.1 Geberit Monolith outlet pipe for wall-hung WC
Article no. Description
131.088.29.1 Geberit Monolith S-bend 90/110
Article no. Description
131.085.11.1 Geberit Monolith offset outlet pipe
Article no. Description
131.108.11.1 Geberit Monolith offset outlet pipe
Article no. Description
131.104.00.1 Set of Geberit Monolith feet
Geberit MonolithAccessories for Geberit Monolith sanitary module
Sanitary Systems Catalogue 2014/2015 93
Support brackets for WC ceramic appliance for Geberit Monolith sanitary module
Ordering Information
Cup for dual flush 4.5 / 3 l for Monolith Plus new
Application Purpose
• For Geberit Monolith sanitary modules for wall-hung WCs• For Geberit Monolith sanitary modules for floor-standing WCs
Characteristics
• Reduces the large flush volume to 4.5 l
Ordering Information
Article no. Description
131.105.00.1Support brackets for WC ceramic appliance for Geberit Monolith sanitary module
Article no. Description
131.161.00.1 Cup for dual flush 4.5 / 3 l for Monolith Plus