Power Units, Air - for uses where elec-trical is unavailable or undesirableand shop air is available. Explosionproof
Power Units, Continuous Duty - powerunits equipped with motors capableof a high number of motor starts perhour
Power Units, Continuous Running -heavy duty with special cooling fea-tures. Power runs continuously.Valves are actuated to activate lift.For extremely high numbers of jogs orcycling
Power Units, DC, JIC Style (ContinuousRunning)-Built to JIC specifications
Power Units, DC - for use with batterypower
Power Units, Oversize - Higher horse-power motors and larger pumps andcomponents for increasing travel andspeed
Power Units, Remote - Remote motor.Power connection via hydraulic hoses
Powered Drive - motor and gear boxdrives at least two wheels
Push Bar - for use with wheel or casterequipped, portable units
Roller Conveyor Platform - gravity orpowered for integration with otherhandling equipment. Usually treat asa “rolling load” and derate edge loadssimilarly.
Screw Jack Actuation - gear motorworm or ball screw. Precise, repetitivepositioning
Special Coatings - coatings such asspray metalizing and steel coat areavailable and must be specified bythe customer
Temperature Extremes - special sealingand hydraulic fluids for use in abnor-mally hot or cold environments
Throw-over Bridge - hinged plate usedto bridge gap between platform sur-face and adjacent fixed height surface
Tilter - positions work at 30, 45, or 90degrees
Toe Guard, Beveled - beveled edge on plat-form serves as toe protection for worker
Toe Guard, Electric - electrical contact stopsdown movement when obstacle is encoun-tered
Turntable - manual or powered. Rotates andpositions a load ergonomically.
Valve(s), No Coast - where precise position-ing is desired. Hydraulic dump valvesdecrease upward coast
Valve(s), Minimum Down Drift - provides forpositive shutoff. For use where platformmust maintain position for extended periods
Valve, Upstop - Hydraulic component usedprimarily to physically limit the travel of scis-sors lifts which have RAM type cylinders bydepressing a plunger which diverts hydraulicflow from the cylinder to the oil reservoir
V-deck Platform - for centering of cylindri-cal loads (rolls)
“Vee” Wheels - for use with inverted angleor vee track to provide fixed path lateralmovement
Velocity Fuse(s) - prevent(s) free fall in theevent of hydraulic failure
Wall Mounted Push Button - provides fixedoperating station
Wheel Chock - automatically engages as liftraises, preventing wheeled vehicle fromrolling off platform
“The MISSION of AUTOQUIP CORPORATIONTO BE A RECOGNIZED LEADER IN THE MATERIAL HANDLING INDUSTRY THROUGH OUR COMMITMENT TO:
• Safe, innovative and timely solutions that MEET OR EXCEED CUSTOMER EXPECTATIONS.
• WORLD CLASS PERFORMANCE in all areas of our business. • An EMPLOYEE PARTNERSHIP that values creativity, participation and growth. ”
It is generally recognized that Autoquip’s growth and steady development toward its present broad product line
is a direct result of suggestions it has received from its field sales personnel and its customers. Autoquip listens.
Autoquip responds. The company has many years of experience designing and manufacturing lifting devices...
the company also has a long list of satisfied customers! Among these Autoquip product users are America’s
leading companies. Autoquip today is truly the leader when it comes to providing “Lifting Solutions” for the
world of industry today!
Warranty: One Year - Parts and Labor Autoquip warrants its scissor lifts to be free from substandard workmanship and material for a period of one year. This warranty includes all components of the lift, including all electrical and hydraulic components, parts or devices. Autoquip will provide direct or through its authorized agentthe necessary skilled labor to facilitate such repairs or replacements in a timely manner to minimize inconvenience to the end user.
One Year - Electrical and Hydraulic ComponentsUnder normal operating conditions, should substandard workmanship or material in the electrical or hydraulic components cause failure, rendering them unfit for further service, Autoquip will furnish, free of charge, replacement components for one year.
Lifetime - Hydraulic Cylinder Seals on Series 35One Year - Hydraulic Cylinder Seals on All Other EquipmentUnder normal operating conditions, should substandard workmanship or material in the hydraulic cylinder seals cause failure, rendering them unfit for further service, Autoquip will furnish, free of charge, replacement seal kit for the life of the equipment.
Five Years - Mechanical on Series 35One Year - Mechanical on All Other MachinesFor a period of five years from date of installation, Autoquip will warrant the structure of the lift against breakage or failure of all mechanical components due to substandard design, workmanship, or material. Our obligation under this warranty is limited to repair or replacement at our option, of any part or material which proves to be substandard. Evidence of physical abuse or capacity overload shall void this mechanical warranty.
All warranties apply only to the original installation and commence from date of installation provided the lift is put into service not later than (6) months after original shipment from Autoquip. This warranty is valid only if the lift is maintained and operated as required by the Owner’s Manual. Improprieties including, but not limited to, overloading, abuse, negligence, or failure to maintain or adjust the equipment properly, will void the equipment warranty. The warranty is also voided if unauthorized parts or equipment are installed, or modifications are made.
IC-1001888-811-9876 405/282-5200 fax: 405/282-8105 www.autoquip.com © 2001 Autoquip Corporation
GLOSSARY OFOPTIONS & ACCESSORIES
Autoquip Corporation © 2001 888-811-9876 405/282-5200 fax: 405/282-8105 www.autoquip.com
Controls, Constant Pressure (Dead Man’s) -Push button control of travel which whenfinger is removed from the button, travelstops
Controls, Quick Disconnect - for use withportable or frequently relocated lifts. (Notavailable for power supply)
Double Acting Cylinders - where specialapplications require control of both up anddown action
Flanged Wheels - for use with flat or rail-type track to provide fixed path lateralmovement
Fork Pockets - allow unit to be readilymoved by fork truck
Handrails and Snap Chain - for use whenpersonnel must be raised or lowered.Removable rails allow access from all sideswhen lift not in use. Rails are 48” high.May require oversize platform: 4” per railfor removable handrails. (Handrail may bebolted to a mounting plate on top of thelift platform.)
Lag-down provision - for use when a unitneeds to be permanently attached to thefloor
Lifting Eye Bolts - steel eyebolts are provid-ed so lift can be lifted and/or moved with ahoist. Included with all bevel toe guardplatforms
Limit switch - stops travel and prevents overtravel. Provides height positioning and canactivate associated equipment
NEMA Rated - packages comply with NEMAstandards for outdoor, explosion-proof, andother installations (NEMA 1,2,4,12,7,9)
Operational signals - visual or audiblealarms warn personnel when lift in use
Platform, Lateral Shifting - manual or pow-ered, for use on lifts which are used as apart of a system
Platform, Stainless Steel - corrosion anddamage resistant platform for use with cor-rosive materials or in areas requiring fre-quent wash down
Portability Set - includes wheeled jack han-dle for moving lift from one area to anoth-er. Wheels at one end. (See GENERALINFORMATION)
INTRODUCTION
ii Autoquip Corporation © 2001
Since 1947, Autoquip has been dedicated to
providing ergonomic and productive material
handling solutions to the manufacturing,
distribution and transportation industries.
Autoquip offers a variety of standard and custom
equipment for lifting, tilting, and turning to
improve the safety and efficiency of your
production system. AutCustom Lifting Solutions For Unique Material Handling Applications
With decades of experience in engineering and manufacturing solutions to material
handling problems, Autoquip can custom design products to increase your produc-
tivity and streamline work-flow. Whether you need a product raised, lowered, turned,
or tilted Autoquip has the engineering experience and manufacturing capability to
handle virtually any custom material handling project.
So, call Autoquip today for a custom material handling solution to increase your
facility’s productivity, and the safety of your employees.
888-811-9876 405/282-5200 fax: 405/282-8105 www.autoquip.com © 2001 Autoquip Corporation
Acce
ss Pl
ateAc
cordi
on Sk
irting
Adde
d Roll
over
Capa
city
Air Ba
g Actu
ation
Anti-
skid
Surfa
ceAp
proac
h Ram
pAu
tomati
c Ind
exing
Ball T
ransfe
r Surf
ace
Base
Fram
e, Ad
ded B
uild-
UpBa
se Fr
ame,
Narro
wBa
se Fr
ame,
Wide
Caste
rsCo
ating
s, Co
lors a
nd Ep
oxySp
ecial
Coati
ngs
Contr
ols, C
onstan
t Pres
sure (D
ead Ma
n’s)
Contr
ols, Pr
ess an
d Rele
ase (a
utoma
tic)Co
ntrols
, Quic
k Disc
onne
ctCo
ntrols
, Wall
Mou
nted
Doub
le Ac
ting C
ylind
ersFla
nged
Whe
elsFo
rk Po
ckets
Hand
rails
and S
nap C
hain
Lag-
down
prov
ision
Liftin
g Eye
Bolts
Limit s
witch
NEMA
/UL R
ated
Opera
tiona
l sign
alsPla
tform
, Late
ral Sh
ifting
Platfo
rm, S
tainle
ss St
eel
Porta
bility
Set
Powe
r Unit
s, Air
Powe
r Unit
s, Co
ntinu
ous D
utyPo
wer U
nits,
Conti
nuou
s Run
ning
Powe
r Unit
s, DC
, JIC S
tyle
Powe
r Unit
s, DC
Powe
r Unit
s, Ov
ersize
Powe
r Unit
s, Re
mote
Powe
red Dr
iveRo
ller C
onve
yor Pl
atform
Screw
Jack
Actua
tion
Tempe
rature
Extre
mes
Throw
-over
Bridg
eTil
ter
Toe Gu
ard, B
evele
dToe
Guard
, Elec
tric
Turnt
able
Valve
s, Mi
nimum
Down
Drift
Valve
s, No
Coas
tVa
lve, U
pstop
V-dec
k Plat
form
“Vee
” Whe
elsVe
locity
Fuse
sWh
eel C
hock
Series 35 Scissors Lift
Series 35 Extra Wide
Series 35 Extra Narrow
Series 35 Double Long
Series 35 Double High
Series 35 Double Wide
Series 35 Turntables
Series 35 Tilter
Upender
Auto Tilt
Air Force Lift
Air Force Tilt
Spiralift
Auto Low
Porta-Lift Precision Tables
Double Pantograph Lifts
Super Titan
CLo-Pro
arousel
Trojan Coil Car
Ram Lifts
AVAILABLE OPTIONS & ACCESSORIES
© 2001 Autoquip Corporation iii
oquipcontents: General & Technical Information . . . . . . . . . . . . . . page ivSeries 35 Scissors Lift . . . . . . . . . . . . . . . . . . . . . page 1Series 35 Extra Wide, Extra Narrow . . . . . . . . . . . .page 3Series 35 Double Long, Double High, Double Wide . . . . . . . .page 5Series 35 Turntables . . . . . . . . . . . . . . . . . . . . . . page 7Series 35 Tilters . . . . . . . . . . . . . . . . . . . . . . . . . page 9Auto Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 11XLR, XLRA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 13XLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 15Air Force Lift . . . . . . . . . . . . . . . . . . . . . . . . . . . page 17Air Force Tilter . . . . . . . . . . . . . . . . . . . . . . . . . page 19Double Pantograph Lifts . . . . . . . . . . . . . . . . . . . page 21Titan Scissors Tables . . . . . . . . . . . . . . . . . . . . . page 23Super Titan . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 27Titan Upender . . . . . . . . . . . . . . . . . . . . . . . . . .page 35Spiralift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 37Carousel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 39Trojan Coil Car . . . . . . . . . . . . . . . . . . . . . . . . . .page 41Platform Ram Lifts . . . . . . . . . . . . . . . . . . . . . . page 43Options and Accessories . . . . . . . . . . . . . . . . . . . page 45
I N P L AN T
ERGONOM
ICSPECIAL APPLICATIONS
iv Autoquip Corporation © 2001
Choose the right equipmentAutoquip products have been designed to perform
specific tasks. Customer satisfaction is paramount
and it is important that consideration be given to
all of the following conditions to insure the proper
lift is matched to a specific job application.
Lowered Height - Model selection considerations should includemaximum lowered height for application. Forground level operations, consider pit mountingof the unit.
Vertical Travel - Decide how high a load needs to be raised andnote the distance. Specifications for allAutoquip lifts show “standard vertical travel.”Distances are expressed in inches. Select oneof these standard travels (or the next highertravel) from the specification tables shown forthe product being considered.
Raised Height -Model selection considerations should includemaximum raised height for application. Forhigher level operations, consider a double highmodel.
GENERAL & TECHNICAL INFORMATION
Double Long, Double Wide and Double High
Single Scissors LiftAlso referred to as “Single Stage” type with power unit normally mounted between legs.Depending on application, can be combined into Double Long, Double Wide or even Double High.
Double Long Scissors LiftFor applications requiring very long platforms. Combination consists of two standard scissorslifts with a common platform and base. Single power unit controls both lifts. Rated maxi-mum capacity for combination is 80% of combined catalogued capacities of single scissorslifts selected. Consult Sales for pricing.
Double Wide Scissors LiftFor applications requiring very wide platforms. Combination consists of two standard scis-sors lifts mounted side-by-side with a common platform and base. Single power unit con-trols both sets of lifts. Rated maximum capacity of combination is 80% of combined cata-logued capacities of single scissors lifts selected.
Double High Scissors Lift For applications requiring high travel with relatively short platforms. Combination consists oftwo standard lifts stacked one on top of the other. The capacity rating is that of the upperlift. Lower lift must be sized to raise rated load plus weight of upper lift. Single power unitin lower lift controls both sets of lifts. Travels which exceed 60” may require guarding –consult sales. Double pantograph models are also available
© 2001 Autoquip Corporation v
Lifting Capacity -Lifting capacity is the gross weight a lift isrequired to raise. Determine the maximumweight that must be handled. Select a “stan-dard lifting capacity” for one of the Autoquipproducts from the specification table. Whendoing so, be sure to consider the following:
Side-End Load - the amount of static load thatcan be applied over the edge of a lift platformin the fully raised position.
Axle Load - rolling load which takes intoaccount the added forces applied to the liftthrough momentum and impact of the wheels.
edge4,500 lbs. 4,500 lbs.
8,000 lbs.8,000 lbs.
4,000 lbs. per axle
4,500 lbs. 4,000 lbs 4,000 lbs.
axleEdge and Axle Loading
The Edge Load capacity of a lift is the maximum “static”weight that can be supported along the edge of the platform.In order to derate a static edge load rating to an allowabledynamic axle load rating, divide by 1.5.EXAMPLE: Lift with 4,500 lb. edge load rating has3,000 lb. axle load capacity.
The Axle Load capacity of a lift is the maximum “dynamic”weight that can be rolled across the lift’s edge. In order toconvert a catalogued axle load rating to a static edge loadrating, multiply by 1.5.EXAMPLE: Lift with 4,000 lb. axle load rating has a6,000 lb. edge load capacity.
vi Autoquip Corporation © 2001
GENERAL & TECHNICAL INFORMATION
Platform Size -Determine overall dimensions which thelargest load will occupy and attempt toselect a “Standard Platform Size” from anAutoquip product specification table. If anon-standard platform size is required, findthe minimum and maximum size of theplatform for a particular model lift. Be surethe required size falls within the availablerange. Factors affecting platform size arelifting capacity, vertical travel, pit installa-tion requirements, mounting of variousaccessories, etc. Electric toe guards orhanging toe indicator bars are required onunits equipped with straight side plat-forms. Toe protection is required per ANSIMH29.1.
Oversize Platform - will also require derating.The end or side load capacity must bereduced by 2% for each additional inch thatis added to the Standard Minimum Platformwidth or length.
Pit Mounting -For pit mounted installations, OSHA requiresplatforms be equipped with toe protection, (i.e.beveled toe guards, electric toe guards or hang-ing toe indicator bars). The minimum loweredheight is noted in the product matrix for eachmodel; however roller shades or accordion skirt-ing may increase the lowered height of the unit.Pit mounted turntables require bevel toe guardson lift, skirting on turntable and an orientationinterlock if the turntable platform dimensionsare equal to or less than the lift platformdimensions. If turntable platform size exceedslift platform size, beveled toe guards onturntable and an orientation interlock arerequired.
Operating Speed -Product specification tables will provide thestandard operating speed for a unit. If differentrequirements are needed, request informationfrom sales.
Option Minimum Increase In Platform SizeWidth Length
Beveled Toe Guards 8” 8”Electric Toe Guards with straight side platforms 4” 4”Electric Toe Guards (Pit Mounted) 8” 8”Hanging Toe Indicator Bars with straight side platforms 2” 2”Accordion Skirting 6” 6”Standard Accordian Skirting (Pit Mounted) 14” 14”Outboard Perimeter Accordian Skirting (Pit Mounted) 8” 8”Outboard Perimeter Skirting with Straight Sides 8” 8”Removable Handrails 4” per rail 4” per rail
© 2001 Autoquip Corporation vii
Duty Cycles -Standard duty - for general industrial applica-tions. Number of cycles should not exceed100,000 per year. Equipment downtime doesnot adversely affect production under theseconditions. (The “frequency” of lift operationsshould not exceed standard shown below.)
High cycle - when total number of cycles peryear exceeds 100,000. When possible equip-ment downtime could seriously affect produc-tion. Speed and cycle frequency determinessize of power unit, motor horsepower, pumpoutput, and tank capacity to dissipate heatbuildup. Power units are usually built for con-tinuously running operation. Special pivot bear-ings are used which have longer life at highcycles. Units are designed to accommodatefatigue stress and extra wear.
High Speed - when required speed exceeds stan-dard catalogued speed, larger pump and motorsare used.
Frequency of Lift Operations - Intermittent duty rated motors are used in allstandard applications and are rated for a fre-quency of operation not exceeding one full liftevery 2 minutes. Failure to observe these fre-quencies could cause motor to overheat.
If “jogging” is required, as a part of a feedingoperation, be sure jogs are limited to one 2 sec-ond jog every 10 seconds for a limited time,but not to exceed 200 motor starts an hour. Ifapplication should require greater frequency,check with Sales department for a high cyclerated special lift, which is equipped with a con-
tinuous-running power unit. (NOTE: All inter-nally mounted power units are equipped withoil and power cord. Externally mounted powerunit does not include either.)
Turntables -Stand-alone1. All standard turntable capacities assumethat the load on the turntable is uniformly dis-tributed and that the C.G. of the load is placedwithin 10” of the center pin.
2. Standard turntables are not designed towithstand true edge or axle loading. If edge oraxle loading is anticipated, additional turntableplatform support at the edges must be consid-ered and provided.
3. The smallest turntable platform size withbevel toe guards is 44” x 44” to adequatelyclear the support rollers mounted to the stan-dard 24” x 24” turntable base plate.
4. Turntables are available with optionaldetents, locks, physical stops, limit switch sig-nals, or powered drive.
Mounted to Lifts5. If the lift platform provided is the standardminimum size (with or without bevel toeguards), the lift capacity does not have to bede-rated for the mounting of manual turntablesup to 48” x 48” in size.
6. Regardless of platform size, the lift capacitymust be derated by 500 lbs. for the mountingof catalogued powered turntables which exceed36” x 36” in size.
viii Autoquip Corporation © 2001
GENERAL & TECHNICAL INFORMATION
7. As a rule, turntable platform dimensionsmust not exceed either maximum allowableplatform dimension of the lift that it mounts to.Exceptions will be reviewed and approved byEngineering on an application by applicationbasis.
8. Turntables that mount to lifts in pits must beat least 10” in lowered height to accommodatebevel toe guards and a “home position” limitswitch on the turntable platform.Tilters -Stand-alone1. A tilter application form & approval isrequired if at least one of the following condi-tions exist:
a. Tilt angle in excess of 45 degrees, or
b. Platform requirements exceed standard, or
c. Off-center loading along the width of the platform is required, or
d. Container size exceeds, in any dimension, 50”W x 50”L x 55”H without a pallet or 50”W x 48”L x 48”H on a pallet up to 5”H, or
e. Any container load (including pallet) which has a height/length ratio greater than 1.0
Mounted to Lifts2. Regardless of platform size, the liftingcapacity must be de-rated by 500 lbs. for themounting of catalogued tilters.
3. Tilter platform width must not exceed themaximum allowable lift platform width.
4. Tilters mounted to lifts must tilt over theroller end of the lift, never over the side. Totalload plus tilter weight must not exceed themaximum allowable end load of the lift.Power supply - Standard for single phase horsepower units is230V/1PH/60Hz. 115V/1PH/60Hz is also avail-able. Standard for three phase power units is208/230/460V/3PH/60Hz. (NOTE: Alwaysspecify power supply requirements. Properoperation on 115 Volt power involves the provi-sion of a separate 30 amp or larger circuit andadequate wiring to assure an actual 115 Voltsat the control box during operation under fullload.)
Controls - 24VAC is standard control voltage, 115VAC and24VDC are available upon request. Whereapplicable, standard controls include anUP/DOWN constant pressure pushbutton sta-tion. Also available upon request are foot, keyand automatic (PLC) operating devices.
© 2001 Autoquip Corporation ix
Configuration for Wheel Sets
Portability - Standard portability options are shown inthe drawings below for moving empty lifts.When portability is a factor with the prod-uct desired, refer to these drawings andspecify preference. Wheel and dolly set isused for moving empty lifts.
Portability wheels end mounted on base frame
Portability wheels side mounted on base frame
Transport -Transport set is used for moving a lift witha capacity load.
Transport wheels end mounted on base frame
Transport wheels side mounted on base frame
1 Autoquip Corporation © 2001
Series 35 is the most versatile and popular family of lifts. This family of liftscan be used in a wide variety of applications – such as pallet build-up andtear-down, part assembly and disassembly and conveyor systems – toimprove worker ergonomics or enhance plant efficiencies. The Series 35reduces worker fatigue and reduces the risk of back injuries. Series 35offers a high quality, low cost lifting solution.
Series 35 lifts include many popular-sized models whichcan be used in a wide variety of lifting applications. 1,500to 8,000 lb. capacities. 24" to 60" travel.
SERIES 35 SCISSORS LIFT
TYPICAL MARKETSDistribution & WarehousingWood WorkingMetal WorkingPaper & Print
GENERAL APPLICATIONSPalletizing & DepalletizingFeeding/ReceivingErgonomic PositioningSystem with Conveyer
Leg stiffenerbars to provideextra strengthand supportPolyethylene tank
preventscondensation,
provides easy checkof oil level
Velocity fusesto preventuncontrolleddescent
© 2001 Autoquip Corporation 2
Travel(in.)
to 24"
to 36"
to 48"
to 60"
Cap.(lbs.)
2,5004,0006,0008,0001,5002,5004,0006,0008,0002,5004,0006,0008,0002,5004,0006,000
LoweredHeight(in.)
6 1/26 1/26 1/276 1/26 1/26 1/26 1/277777 1/2888
RaisedHeight(in.)
30 1/230 1/230 1/23142 1/242 1/242 1/242 1/24355555555 1/2686868
Max.EndLoad(lbs.)
2,5004,0004,5004,5001,0002,5003,5003,5003,5002,5003,5003,5003,5002,5003,5003,500
Max.SideLoad(lbs.)
2,5004,0004,5004,5007502,5003,5003,5003,5002,5003,5003,5003,5002,5003,5003,500
StandardPlatform &Base Frame(inches)
24x3624x3624x3624x3624x4824x4824x4824x4824x4824x6424x6424x6424x6432x8732x8732x87
MaximumAllowablePlatformSize (in.)
48x6048x6048x6048x6048x6048x7248x7248x7248x7248x9648x9648x9648x9660x12060x12060x120
ElectricMotor(hp)
1.51.51.51.50.51.51.51.51.51.51.51.5 1.51.51.51.5
No. ofCyl.
1122111221122122
ShippingWeight(lbs.)
5005105306505806106206507508208308609601,8001,8001,800
Raising orLoweringTime(sec.)
8111622281217253416223344224444
SPECIFICATIONS: 1,500 to 8,000 lb. Capacities, Travel Up to 60"
Series 35 Scissors Lift Model Specifications: 1,500 to 8,000 lb. Capacities, Travel Up to 60"
KEY FEATURES· Lubricated-for-life composite bearings on all pivot points· Solid steel legs with stiffener bars· Turned, ground, polished and hard-chromed axle pins· Double-wire braided hydraulic hoses· Velocity fuses on cylinders· Polyethylene reservoir· Maintenance (safety) locks in base frame· Factory tested to 110% of capacity· Internally mounted power unit· Pre-wired power unit with UL approved and labeled control components
· Built and designed in accordance with ANSI MH29.1
OPTIONS· Pit mounting (requires 8 1/2" lowered height)
BENEFITS· Maintenance free bearings, no greasing· Minimal platform deflection· Extended bearing life· Extended hose life for added safety· Controlled descent in case of severed hose – Safety first!· Reservoir will not contain rust, weld slag or condensationapparent with metal tanks. Allows visual checking of oil level
· Easy access to hydraulic/electrical components for servicing· Ready to operate lift with zero plumbing and minimal wiring
· Backed by the best warranty in the industry
POWER SUPPLY The electric motor is internally mounted.It is available in either 1 1/2 hp three-phase or 3/4 hpsingle-phase, with 24 VAC control valve. The 36S15 has115 volt controls.
ModelNo.
24S2524S4024S6024S8036S1536S2536S4036S6036S8048S2548S4048S6048S8060S2560S4060S60
Series 35 Rover - Portable 24VDC Scissors Lift Model Specifications: 36” 2,500 24x48 48x72 2,500 1,500 14 50 12* Battery 1 1,000 36SRV25
4,000 24x48 48x72 3,000 1,500 14 50 17* Operated 1 1,050 36SRV406,000 24x48 48x72 3,500 1,500 14 50 25* 2 1,100 36SRV60
*Varies depending on amp draw in battery.
NEW!
NEW!
NEW!NEW!NEW!NEW!
NEW!NEW!NEW!
The versatile Series 35 is even more versatile when it becomes mobile. Nowthat great Series can easily be moved to various workstations as required.Simply unplug the 110V power and roll to any position required.
3 Autoquip Corporation © 2001
For applications which require either a narrow footprint due to spaceconstraints or a wider footprint for increased stability and/or high edgelow ratings, the proven Series 35 family of lifts includes Extra Wide andExtra Narrow models. These lifts feature the same solid designprinciples that have established the Series 35 as one of the mostdependable material handling solutions in the industry.
SERIES 35 EXTRA WIDE, EXTRA NARROW
TYPICAL MARKETSDistribution & WarehousingWood WorkingMetal WorkingPaper & Print
GENERAL APPLICATIONSPalletizing & DepalletizingFeeding/ReceivingErgonomic PositioningSystem with Conveyer
Velocity fusesto prevent
uncontrolleddescent
Hard chromedaxle pins for
longestbearing life.
Leg stiffenerbars to provideextra strengthand support
© 2001 Autoquip Corporation 4
S35 EXTRA NARROW, EXTRA WIDEKEY FEATURES
· Lubricated-for-life composite bearings on all pivot points· Solid steel legs with stiffener bars· Turned, ground, polished and hard-chromed axle pins· Double-wire braided hydraulic hoses· Velocity fuses on cylinders· Polyethylene reservoir· Maintenance (safety) locks in base frame· Factory tested to 110% of capacity· Internally mounted power unit (Extra Wide only)· Pre-wired power unit with UL approved and labeled control components
· Built and designed in accordance with ANSI MH29.1
OPTIONS· Pit mounting (requires 8 1/2" lowered height)· Accordian Skirts· Portability package
BENEFITS· Maintenance free bearings, no greasing· Minimal platform deflection· Extended bearing life· Extended hose life for added safety· Controlled descent in case of severed hose – Safety first!· Reservoir will not contain rust, weld slag or condensationcommon with metal tanks. Allows visual checking of oil level.
· Easy access to hydraulic/electrical components for servicing· Ready to operate lift with zero plumbing and minimal wiring
· Backed by the best warranty in the industry
POWER SUPPLY The electric motor is internally mountedon Extra Wide models and remote for Extra Narrowmodels. It is available in either 1 1/2 hp three-phase or3/4 hp single-phase, with 24 VAC control voltage.
Travel Lifting Standard Maximum Max. Max. Lowered Raised Raising or Electric No. of Shipping Model(in.) Capacity Platform & Allowable End Side Height Height Lowering Motor Cyl. Weight No.
(lbs.) Base Frame Platform Load Load (in.) (in.) Time (hp) (lbs.)(inches) Size (in.) (lbs.) (lbs.) (sec.)
to 24” 2,500 48x36 60x60 2,500 2,500 6 1/2 30 1/2 16 1.5 2 715 24S25EXW4,000 48x36 60x60 4,000 4,000 6 1/2 30 1/2 16 1.5 2 715 24S40EXW6,000 48x36 60x60 4,500 4,500 6 1/2 30 1/2 16 1.5 2 715 24S60EXW8,000 48x36 60x60 4,500 4,500 7 31 22 1.5 2 825 24S80EXW
to 36” 2,500 48x48 60x72 2,500 2,500 6 1/2 42 1/2 25 1.5 2 855 36S25EXW4,000 48X48 60x72 3,500 3,500 6 1/2 42 1/2 25 1.5 2 855 36S40EXW6,000 48x48 60x72 3,500 3,500 6 1/2 42 1/2 25 1.5 2 855 36S60EXW8,000 48x48 60x72 3,500 3,500 7 43 34 1.5 2 965 36S80EXW
to 48” 2,500 48x64 60x96 2,500 2,500 7 55 33 1.5 2 1,095 48S25EXW4,000 48x64 60x96 3,500 3,500 7 55 33 1.5 2 1.095 48S40EXW6,000 48x64 60x96 3,500 3,500 7 55 33 1.5 2 1,095 48S60EXW8,000 48x64 60x96 3,300 3,500 7 1/2 55 1/2 44 1.5 2 1,210 48S80EXW
to 60” 2,500 58x87 84x120 2,500 2,500 8 68 44 1.5 2 2,300 60S25EXW4,000 58x87 84x120 3,500 3,500 8 68 44 1.5 2 2,350 60S40EXW6,000 58x87 84x120 4,500 3,500 8 68 44 1.5 2 2,400 60S60EXW
SPECIFICATIONS: Series 35 Extra Wide Platform Scissors Lift Model Specifications: Up to 84" x 120"
Travel Lifting Standard Maximum Max. Max. Lowered Raised Raising or Electric No. of Shipping Model(in.) Capacity Platform & Allowable End Side Height Height Lowering Motor Cyl. Weight No.
(lbs.) Base Frame Platform Load Load (in.) (in.) Time (hp) (lbs.)(inches) Size (in.) (lbs.) (lbs.) (sec.)
to 24” 2,500 16x36 24x60 2,500 2,500 6.5 30 1/2 8 1.5 1 450 24S25EXN4,000 16x36 24x60 4,000 4,000 6.5 30 1/2 11 1.5 1 450 24S40EXN
to 36” 2,500 16x48 24x72 2,500 2,500 6.5 42 1/2 12 1.5 1 560 36S25EXN4,000 16x48 24x72 3,500 3,500 6.5 42 1/2 17 1.5 1 570 36S40EXN
to 48” 2,500 16x64 24x96 2,500 2,500 7 55 16 1.5 1 770 48S25EXN4,000 16x64 25x96 3,500 3,500 7 55 22 1.5 1 780 48S40EXN
to 60” 2,500 24x87 32x120 2,500 2,500 8 68 22 1.5 1 1,600 60S25EXN4,000 24x87 32x120 3,500 3,500 8 68 44 1.5 2 1,650 60S40EXN6,000 24x87 32x120 4,500 3,500 8 68 44 1.5 2 1,700 60S60EXN
SPECIFICATIONS: Series 35 Extra Narrow Platform Scissors Lift Model Specifications: Remote P.U.
NEW!
NEW!
NEW!NEW!NEW!NEW!
NEW!NEW!NEW!
5 Autoquip Corporation © 2001
The Series 35 family of lifts can accomodate application that requireeither a small footprint with high travel with Double High lifts, oroversized platforms with Double Long or Double Wide models. Theseaffordable lifts combine standard Series components to ensuredurability and dependable performance.
SERIES 35 DOUBLE LONG,DOUBLE HIGH, DOUBLE WIDE
TYPICAL MARKETSDistribution & WarehousingWood WorkingMetal WorkingPaper & Print
GENERAL APPLICATIONSPalletizing & DepalletizingFeeding/ReceivingErgonomic PositioningSystem with Conveyer
Maintenancelocks for safe
repairenvironment
Velocity fusesto prevent
uncontrolleddescent
Single pieceplatforms
(Double Longand Double
Wide)
SPECIFICATIONS: Series 35 Double Long, Double High and Double Wide
KEY FEATURES· Lubricated-for-life compositebearings on all pivot points
· Solid steel legs with stiffener bars· Turned, ground, polished and hard-chromed axle pins
· Double-wire braided hydraulichoses
· Velocity fuses on cylinders· Polyethylene reservoir· Maintenance (safety) locks in baseframe
· Factory tested to 110% of capacity· Internally mounted power unit· Pre-wired power unit with ULapproved and labeled controlcomponents
· Built and designed in accordancewith ANSI MH29.1
OPTIONS· Pit mounting (requires 8 1/2"lowered height for single-highmodels)
BENEFITS· Maintenance free bearings, nogreasing
· Minimal platform deflection· Extended bearing life· Extended hose life for addedsafety
· Controlled descent in case ofsevered hose – Safety first!
· Reservoir will not contain rust, weldslag or condensation apparent withmetal tanks. Allows visual checkingof oil level
· Easy access to hydraulic/electricalcomponents for servicing
· Ready to operate lift with zeroplumbing and minimal wiring
· Backed by the best warranty inthe industry
POWER SUPPLY The electricmotor is internally mounted unlessotherwise noted. It is available ineither 1 1/2 hp three-phase or 3/4hp single-phase, with 24 VACcontrol valve.
Travel Cap. Standard Maximum Max. Max. Lowered Raised Raising or Electric No. of Shipping Model(in.) (lbs.) Platform & Allowable End Side Height Height Lowering Motor Cyl. Weight No.
Base Frame Platform Load Load (in.) (in.) Time (hp) (lbs.)(Inches) Size (in.) (lbs.) (lbs.) (sec.)
Series 35 Double Long Scissors Lift Model Specifications: Up to 48" x 162"to 24” 4,000 24x74 48x98 2,500 4,000 6 1/2 30 1/2 16 1 1/2 1 1,100 24S25DL
6,400 24x74 48x98 4,000 6,400 6 1/2 30 1/2 22 1 1/2 1 1,150 24S40DL9,600 24x74 48x98 4,500 7,200 6 1/2 30 1/2 32 1 1/2 2 1,200 24S60DL12,000 24x74 48x98 4,500 7,200 7 1/4 31 1/4 44 1 1/2 2 1,400 24S80DL
to 36” 4,000 24x98 48x122 2,500 4,000 6 1/2 42 1/2 24 1 1/2 1 1,300 36S25DL6,400 24x98 48x122 3,500 5,600 6 1/2 42 1/2 34 1 1/2 1 1,350 36S40DL9,600 24x98 48x122 3,500 5,600 6 1/2 42 1/2 25* 5 2 1,400 36S60DL12,000 24x98 48x122 3,500 5,600 7 1/4 43 1/4 35* 5 2 1,650 36S80DL
to 48” 4,000 24x130 48x162 2,500 4,000 7 55 32 1 1/2 1 1,700 48S25DL6,400 24x130 48x162 3,500 5,600 7 55 22* 5 1 1,750 48S40DL9,600 24x162 48x162 3,500 5,600 7 55 33* 5 2 1,800 48S60DL12,000 24x130 48x162 3,500 5,600 7 3/4 55 3/4 45* 5 2 2,100 48S80DL
Series 35 Double High Scissors Lift Model Specifications: Up to 96” Travelto 48” 2,400 24x36 36x60 2,000 1,000 13 61 16 1 1/2 1 1,100 24S25DH
3,400 24x36 36x60 3,400 1,600 13 61 22 1 1/2 1 1,150 24S40DH5,400 24X36 36X60 3,500 1,600 13 61 32 1 1/2 2 1,200 24S60DH7,000 24x36 36x60 3,500 1,800 14 62 44 1 1/2 2 1,275 24S80DH
to 72” 1,900 24x48 36x72 1,900 1,000 13 85 24 1 1/2 1 1,300 36S25DH3,400 24x48 36x72 3,000 1,400 13 85 34 1 1/2 1 1,350 36S40DH5,400 24x48 36x72 3,000 1,400 13 85 25* 5 2 1,400 36S60DH7,000 24x48 36x72 3,000 1,400 14 86 35* 5 2 1,475 36S80DH
to 96” 1,700 24x64 36x96 1,700 1,000 13 110 32 1 1/2 1 1,700 48S25DH3,200 24x64 36x96 2,500 1,400 13 110 22* 5 1 1,750 48S40DH5,200 24x64 36x96 3,000 1,400 13 110 33* 5 2 1,800 48S60DH7,000 24x64 36x96 3,000 1,400 14 111 45* 5 2 1,875 48S80DH
Series 35 Double Wide Scissors Lift Model Specifications: Up to 72” x 96”to 24” 4,000 48x36 73x60 4,000 2,500 6 1/2 30 1/2 16 1 1/2 1 1,100 24S25DW
6,400 48x36 72x60 6,400 4,000 6 1/2 30 1/2 22 1 1/2 1 1,150 24S40DW9,600 48x36 72x60 7,200 4,500 6 1/2 30 1/2 32 1 1/2 2 1,200 24S60DW12,000 48x36 72x60 7,200 4,500 7 1/4 31 1/4 44 1 1/2 2 1,400 24S80DW
to 36” 4,000 48x48 72x72 4,000 2,500 6 1/2 42 1/2 24 1 1/2 1 1,300 36S25DW6,400 48x48 72x72 5,600 3,500 6 1/2 42 1/2 34 1 1/2 1 1,350 36S40DW9,600 48x48 72x72 5,600 3,500 6 1/2 42 1/2 25* 5 2 1,400 36S60DW12,000 48x48 72x72 5,600 3,500 7 1/4 43 1/4 35* 5 2 1,650 36S80DW
to 48” 4,000 48x64 72x96 4,000 2,500 7 55 32 1 1/2 1 1,700 48S25DW6,400 48x64 72x96 5,600 3,500 7 55 22* 5 1 1,750 48S40DW9,600 48x64 72x96 5,600 3,500 7 55 33* 5 2 1,800 48S60DW12,000 48x64 72x96 5,600 3,500 7 3/4 55 3/4 45* 5 2 2,100 48S80DW
*Note: Remote 5 hp super torque power units are standard for extra oil volume.
© 2001 Autoquip Corporation 6
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
7 Autoquip Corporation © 2001
Manual turntables are designed to provide workers with the ability torotate their work to them for applications such as pallet build-up andteardown, light assembly, and welding or painting. The heavy-dutydesign has been developed to withstand the demands and abuses of anindustrial environment, yet is exceptionally easy to turn. When used withan Autoquip lift table, these products further enhance both ergonomicand labor savings benefits by reducing reaching, bending, walking, andtwisting associated with palletizing and other repetitive operations.
Series 35 Turntablescome in 24 popularsized models. Thesemodels can be mountedon a scissors lift, thefloor, or any stablebench or other surface.2,500 to 6,000 lb.capacity.
SERIES 35 TURNTABLES
1/2" thick steelplate with
radius corners
Lift notincluded; soldseparately.
Easy turn top
TYPICAL MARKETSWarehousingMetalworkingWoodworkingSystem Integration/OEM
GENERAL APPLICATIONSIn a Paint BoothPalletizing/DepalletizingAssembly TableConveyor
(Lift notincluded; soldseparately.)
3" dia. crownedrollers with doublerow heavy duty
sealed for life ballbearings.
SERIES 35™
TURNTABLE
KEY FEATURES· 1/2" thick steel platform with radius corners· Turned, ground, polished & hard-chromed kingpin· Sealed-for-life ball bearing rollers· Bolt pin retainer with lifetime dry
lubricated bushings· Rigid base frame with predrilled mounting holes· Minimum turntable size is 34" x 34"
BENEFITS· Minimal deflection· Maintenance-free bearings, no greasing· Simple to relocate· Increase production efficiency· Enhanced safety· Reduced worker-related fatigue
POWER SUPPLY· The manual Series 35 Turntable is operated by hand.· The Power Turntable is powered by a 1/4 hp, 115-230V/
60 hz/ 1 ph motor. Controls are not supplied as standard.
CUSTOM DESIGNSA number of “customized” engineering plans are alreadyon file for the SR Series. Additionally, Autoquip offerscomputerized engineering services for development of“one-of-a-kind” manual and powered turntableapplications.
© 2001 Autoquip Corporation 8
Capacity (lbs.)
2,5004,0006,0002,5004,0006,0002,5004,0006,0002,5004,0006,000
2,5004,0006,0002,5004,0006,0002,5004,0006,0002,5004,0006,000
Series 35 Model No.
SR4-3625SR4-3640SR4-3660SR4-4225SR4-4240SR4-4260SR4-4248-25SR4-4248-40SR4-4248-60SR4-4825SR4-4840SR4-4860
SRP-3625SRP-3640SRP-3660SRP-4225SRP-4240SRP-4260SRP-4248-25SRP-4248-40SRP-4248-60SRP-4825SRP-4840SRP-4860
Platform Size (in.)
36 x 3636 x 3636 x 3642 x 4242 x 4242 x 4242 x 4842 x 4842 x 4848 x 4848 x 4848 x 48
36 x 3636 x 3636 x 3642 x 4242 x 4242 x 4242 x 4842 x 4842 x 4848 x 4848 x 4848 x 48
Base Size (in.)
24 x 2424 x 2424 x 2424 x 2424 x 2424 x 2424 x 2424 x 2424 x 2424 x 2424 x 2424 x 24
24 x 2424 x 2424 x 2424 x 2424 x 2424 x 2424 x 2424 x 2424 x 2424 x 2424 x 2424 x 24
Total Height (in.)
444444444444
101010101010101010101010
Shipping Weight (lbs.)
200225250275300325325325350350375400
385385385450450450485485485525525525
Powered Turntables
SPECIFICATIONS: 2,500 to 6,000 lbs.; 4 Standard Platform Sizes; 360° Rotation
Manual Turntables
9 Autoquip Corporation © 2001
Tilters bring parts and hard-to-reach objects to within easy grasp of theoperator in applications such as small parts handling (in bins andbaskets), assembly or disassembly of large components, and stackingor un-stacking operations. They reduce the need to reach and bendover, which are the leading cause of back injuries in repetitiveoperating environments. When used with an Autoquip lift table, thesetilters further enhance both ergonomic and labor savings benefits.
Series 35 Tilters include12 popular sizedmodels which can beused in a wide varietyapplications. 2,500 to6,000 lb. capacities.30 degrees to 45degrees travel.
SERIES 35 TILTERS
TYPICAL MARKETSFood & DrugMetalworkingAutomotive & TransportationTextile
GENERAL APPLICATIONSTilting ProductsErgonomic PositioningPalletizing/Depalletizing
(Lift notincluded; sold
separately.)
MaintenanceLock
Internal power unit
SERIES 35™
TILTERSPECIFICATIONS: 30° to 45° Travel; Capacities 2,500 to 6,000 lbs.
KEY FEATURES· Lubricated-for-life composite bearings on all pivot points· Solid steel construction· Turned, ground, polished and hard-chromed axle pins· Double-wire braided hydraulic hoses· Polyethylene reservoir· Maintenance (safety) locks in base-frame· Factory tested to 110% capacity· Internally mounted power unit· Pre-wired power unit with UL approved and labeled controls
· Built and designed in accordance with ANSI MH29.2· 12" high lip standard· 28" width x 38" length minimum platform
BENEFITS· Maintenance-free bearings, no greasing· Minimal platform deflection· Extended bearing life· Extended hose life for added safety· Polyethylene reservoir will not contain rust, weld slag orcondensation apparent with metal tanks. Allows visualchecking of oil level
· Easy access to hydraulic/electrical components for servicing
· Ready-to-operate lift with zero plumbing and minimal wiring
POWER SUPPLY The electric motor is internally mounted.It is available in either 1 1/2 hp three-phase or 3/4 hpsingle-phase, with 24V AC control voltage.
CUSTOM DESIGNSA number of “customized” engineering plans are alreadyon file for the STE Series. Additionally, Autoquip offerscomputerized engineering services for development of“one-of-a-kind” ergonomic tilter applications.
© 2001 Autoquip Corporation 10
Travel(degrees)
304530453045304530453045
Capacity(lbs.)
2,5002,5002,5002,5004,0004,0004,0004,0006,0006,0006,0006,000
Series35Model No.STE 30-25-4STE 45-25-4STE 30-25-5STE 45-25-5STE 30-40-4STE 45-40-4STE 30-40-5STE 45-40-5STE 30-60-4STE 45-60-4STE 30-60-5STE 45-60-5
LoweredHeight(in.)888888888888
StandardPlatform(in.)44 x 4444 x 4450 x 5050 x 5044 x 4444 x 4450 x 5050 x 5044 x 4444 x 4450 x 5050 x 50
BaseSize(in.)24 x 4124 x 4124 x 4124 x 4124 x 4124 x 4124 x 4124 x 4124 x 4124 x 4124 x 4124 x 41
Raising orLoweringTime (sec.)585858585858
ElectricMotor(hp)1.51.51.51.51.51.51.51.51.51.51.51.5
No.ofCyl.111111111111
ShippingWeight(lbs.)500525600625525550625650550575650675
11 Autoquip Corporation © 2001
The Auto Tilt family is the ideal solution for loading and unloading bins andbaskets at a workstation. The Auto Tilt is portable and battery operated for"plug and play" at any location. This unit puts small parts or other itemswithin reach and allows a worker easy access to the product withoutreaching or bending. Eliminates the risk of back injuries and makes theworkplace safer and more productive. No installation required.
Auto Tilt lifts include 4 models, 2 standard configurationsincluding a straddle design, with lifting capacities to 4,000lbs. and a tilt angle of 0-89°.
AUTO TILT
TYPICAL MARKETSMetal WorkingAutomotive & TransportationFood & Drug
GENERAL APPLICATIONSTilting ProductsTransporting ProductsErgonomic Positioning
89° of Tilt
Heavy Duty12V DeepCycle Battery
Completelyportable fromjob position tojob position
AUTO-TILT™
KEY FEATURES· Infinitely angled from 0 to 89 degrees· Forks 42" long, 7" wide· Fork outside dimension is 27" wide· Front wheels are 3" diameter phenolic wheels withdual ball bearings
· Rear casters are 8" phenolic wheels· Forks lower to 3 1/2"· Lifetime Warranty hydraulic cylinder seals· Integrated floor lock is standard· Heavy-duty 12v deep cycle battery· Optional battery charger· High quality enamel finish· Permanent push-pull handle for easy movement
BENEFITS· Allows workers to access containers without dangerous bending orreaching
· Eliminates need for permanent electrical wiring at work station· Highly mobile for work at multiple locations· Allows increased productivity, reduced risk of back strain
POWER SUPPLY Integral power unit with 12v DC motor. Battery is 12v.Also available in either 1 1/2 hp three-phase or 3/4 hp single-phase with24V AC control voltage.
© 2001 Autoquip Corporation 12
SPECIFICATIONS: 0 to 89 Degree Tilt: Capacities 2,000 or 4,000 lbs.
ModelNo.
STR 89-20STR 89-40
Cap.(pounds)
2,0004,000
STRADDLE DESIGN
TiltAngle(degrees)0-890-89
ForkWidth(inches)77
BetweenForks(inches)1313
ForkLength(inches)4242
Overall ForkSpacing(inches)2727
OverallWidth(inches)3535
OverallHeight(inches)3636
ShippingWeight(pounds)745745
Tilt TimeEmpty(seconds)2020
STR 89-20SSTR 89-40S
2,0004,000
0-890-89
77
1313
4242
2727
5656
3636
745745
2020
13 Autoquip Corporation © 2001
Designed with the Autoquip quality and dependability our customers havecome to depend on, Low Profile lifts stand alone in the industry in theirability to deliver maximum capacities and travels while minimizing reaching,bending and movement by operators. Low Profile material handlingequipment has been developed with the “Lean” manufacturer in mind –eliminating inefficiency and waste by bringing the work as close to theworker as possible.
XLR LOW PROFILE LOW-REACH PAN LIFTS
TYPICAL MARKETSDistribution & WarehousingMetal WorkingPaper & Print
GENERAL APPLICATIONSFeeding/ReceivingErgonomic PositioningSystem with Conveyer
Automatictoe protection
4” reach
Thru-flowload pattern
Velocity fuses
Travel Lifting Standard Standard Side Max. Lowered Raised Raising or Shipping Model(in.) Capacity Platform Base Reach Edge Height Height Lowering Weight No.
Size Size Over Load (in.) (in.) Time (lbs.)(in.) (in.) (in.) (lbs.) (sec.)
LOW PROFILE XLRA - AIR PAN LIFTto 36" 3,000 40x48 48x60 4 1,000 0.5 36.5 * 1,185 36XLRA3040
3,000 46x48 54x60 4 1,000 0.5 36.5 * 1,225 36XLRA30463,000 52x48 60x60 4 1,000 0.5 36.5 * 1,265 36XLRA3052
to 48" 3,000 40x64 48x76 4 1,000 0.5 48.5 * 1,345 48XLRA30403,000 46x64 54x76 4 1,000 0.5 48.5 * 1,400 48XLRA30463,000 52x64 60x76 4 1,000 0.5 48.5 * 1,455 48XLRA3052
*Depends on air supply.
XLR LOW PROFILE PAN LIFTS
SPECIFICATIONS: 2,000 to 4,000 lb. Capacities, Travel Up to 48"
KEY FEATURES· Industry best 4" reach over· Near zero lowered height· Lubricated-for-life composite bearings on all pivot points· Solid steel legs· Turned, ground, polished and hard-chromed axle pins· Double-wire braided hydraulic hoses· Velocity fuses on cylinders· Polyethylene reservoir· Maintenance (safety) locks in base frame· Factory tested to 110% of capacity· Pre-wired power unit with UL approved and labeled control components· Built and designed in accordance with ANSI MH29.1
OPTIONS· Rear bridge· Thru-flow load pattern (adds 1/4" to lowered height)
BENEFITS· Maintenance free bearings, no greasing· Minimal platform deflection· Extended bearing life· Extended hose life for added safety· Controlled descent in case of severed hose – Safety first!· Reservoir will not contain rust, weld slag or condensation common with metal tanks.Allows visual checking of oil level
· Easy access to hydraulic/electrical components for servicing· Ready to operate lift with zero plumbing and minimal wiring· Backed by the best warranty in the industry
POWER SUPPLY The XLR electric motor is internally mounted unless otherwisenoted. It is available in either 1 1/2 hp three-phase or 3/4 hp single-phase, with24 VAC control valve.
KEY FEATURES· Industry best 4" reach over· Air cylinders have velocity fuses· Easy access to cylinders· Hand valve standard with 6' hose· Operating pressure - 80 psi· Built in accordance with ANSI MH29.1
BENEFITS· Requires no electricity· Clean - no hydraulics - no oily mess· Powered by existing shop air· Minimum maintenance· Explosion-proof applications
Travel Lifting Standard Standard Side Max. Lowered Raised Raising or Electric No. of Shipping Model(in.) Capacity Platform Base Reach Edge Height Height Lowering Motor Cyl. Weight No.
Size Size Over Load (in.) (in.) Time (hp) (lbs.)(in.) (in.) (in.) (lbs.) (sec.)
LOW PROFILE XLR - HYDRAULIC PAN LIFTto 36" 2,000 40x48 48x60 4 1,000 0.5 36.5 24 1.5 2 950 36XLR2040
2,000 46x48 54x60 4 1,000 0.5 36.5 24 1.5 2 990 36XLR20462,000 52x48 60x60 4 1,000 0.5 36.5 24 1.5 2 1,030 36XLR20524,000 40x48 48x60 4 2,000 0.5 36.5 24 1.5 2 1,040 36XLR40404,000 46x48 54x60 4 2,000 0.5 36.5 24 1.5 2 1,095 36XLR40464,000 52x48 60x60 4 2,000 0.5 36.5 24 1.5 2 1,150 36XLR4052
to 48" 2,000 40x64 48x76 4 1,000 0.5 48.5 32 1.5 2 1,490 48XLR20402,000 46x64 54x76 4 1,000 0.5 48.5 32 1.5 2 1,530 48XLR20462,000 52x64 60x76 4 1,000 0.5 48.5 32 1.5 2 1,570 48XLR20524,000 40x64 48x76 4 2,000 0.5 48.5 32 1.5 2 1,260 48XLR40404,000 46x64 54x76 4 2,000 0.5 48.5 32 1.5 2 1,315 48XLR40464,000 52x64 60x76 4 2,000 0.5 48.5 32 1.5 2 1,370 48XLR4052
NEW!NEW!NEW!NEW!NEW!NEW!NEW!NEW!NEW!NEW!NEW!NEW!
XLRA LOW PROFILE AIR POWERED PAN LIFTS
OPTIONS· Thru-flow load pattern (adds 1/4" to lowered height)· Foot valve operation
NEW!NEW!NEW!NEW!NEW!NEW!
SPECIFICATIONS: 2,000 to 3,000 lb. Capacities, Travel Up to 48"
© 2001 Autoquip Corporation 14
15 Autoquip Corporation © 2001
Designed with the Autoquip quality and dependability our customers havecome to depend on, Low Profile lifts stand alone in the industry in theirability to deliver maximum capacities and travels while minimizing reaching,bending and movement by operators. Low Profile material handlingequipment has been developed with the “Lean” manufacturer in mind –eliminating inefficiency and waste by bringing the work as close to theworker as possible.
XLT LOW PROFILE LOW-REACH PAN LIFTS
TYPICAL MARKETSDistribution & WarehousingMetal WorkingPaper & Print
GENERAL APPLICATIONSFeeding/ReceivingErgonomic PositioningSystem with Conveyer
Compact liftand turnheight for
easy access
Velocity fusesto prevent
uncontrolleddescent
© 2001 Autoquip Corporation 16
XLT LOW PROFILE LIFT AND TURN COMBINATION
SPECIFICATIONS: 4,000 lb. Capacity, Travel Up to 48", Remote Power Unit
KEY FEATURES· 5 3/4” lowered height· Lubricated-for-life composite bearings on all pivot points· Solid steel legs· Turned, ground polished and hard-chromed axle pins· Double-wire braided hydraulic hoses· Velocity fuses on cylinders· Polyethylene reservoir· Maintenance (safety) locks in baseframe· Factory tested to 110% of capacity· Pre-wired power unit with UL approved and labeled control components· Built and designed in accordance with ANSI MH29.1
OPTIONS· Accordian skirts· Turntable detents· Conveyor options· Air motor
BENEFITS· Maintenance free bearings, no greasing· Minimal platform deflection· Extended bearing life· Extended hose life for added safety· Controlled descent in case of severed hose – Safety first!· Reservoir will not contain rust, weld slag or condensation common with metal tanks.Allows visual checking of oil level
· Easy access to hydraulic/electrical components for servicing· Backed by the best warranty in the industry
POWER SUPPLY The electric motor is remote and is available in either 1 1/2 hpthree-phase or 3/4 hp single-phase with 24 VAC control voltage.
Travel Lifting Standard Standard Max. Lowered Raised Raising or Electric No. of Shipping Model(in.) Capacity Platform Base Edge Height Height Lowering Motor Cyl. Weight No.
(lbs.) Size Size Load (in.) (in.) Time (hp) (lbs.)(in.) (in.) (lbs.) (sec.)
LOW PROFILE - XLT LIFT AND TURN36” 4,000 48x48 46x48 2,000 5.75 41.75 17 1.5 2 1,650 36XLT404848” 4,000 48x64 46x64 2,000 5.75 53.75 22 1.5 2 1,950 48XLT4048
NEW!NEW!
The Air Force scissors lifts provide durable and safe lifting solutions forapplications which require air operation rather than hydraulic, such asexplosion-proof or environmentally sensitive locations. These lifts arepowered by heavy-duty Firestone Airstroke actuators, connected to yourplant’s shop air system. These lifts are used in a wide variety ofapplications to improve worker ergonomics and enhance plantefficiencies. Air Force lifts offer a high quality, low cost and portablelifting solution which can be purchased standard, or customized to fitspecific application requirements.
The Air Force Series of lifts comes in 7 popularsized models. Capacities of 2,500 and 5,000 lb.with 24" vertical travel.
AIR FORCE LIFT
Removablegibs
TYPICAL MARKETSAutomotive & TransportationChemicals & PlasticsAerospaceFood & Drug
GENERAL APPLICATIONSExplosion Proof EnvironmentClean Room EnvironmentWash Down EnvironmentAssembly TablePalletizing/Depalletizing
Portable basedesign incorporatesbuilt-in Pallet Jack
pockets
Down speedflow control
and relief valve(under bag)
17 Autoquip Corporation © 2001
Air Bag Lift and Tilter
KEY FEATURES· Rigid base – no lag down required· Portable base design incorporates built-in Pallet Jackpockets
· Removable gibs for easy access· Relief valve to protect airbag from over pressure· Easy access to airbag· Downspeed flow control· Hand valve standard· Operating pressure – 80 psi· Firestone airbag· Built and designed in accordance with ANSI MH29.1
BENEFITS· Requires no electricity· Clean – no hydraulics – no oily mess· Powered by existing shop air· Portable – easy to move with Pallet Jack or Fork Truck· Maintenance free· Explosion-proof applications
CUSTOM DESIGNSA number of “customized” engineering plans are already on filefor the Air Force Series. Additionally, Autoquip offerscomputerized engineering services for development of “one-of-a-kind” air powered applications.
© 2001 Autoquip Corporation 18
SPECIFICATIONS: Capacities – 2,500 to 5,000 lbs.
PlatformSizes(inches)36 x 4848 x 4848 x 5448 x 6048 x 4848 x 5448 x 60
Cap.(MaxLbs.)2,5002,5002,5002,5005,0005,0005,000
BaseframeSize(inches)36 x 4836 x 48 36 x 4836 x 4836 x 4836 x 4836 x 48
Travel(inches)
24242424242424
RaisedHeight(inches)33 1⁄233 1⁄233 1⁄233 1⁄233 1⁄233 1⁄233 1⁄2
LoweredHeight(inches)9 1⁄29 1⁄29 1⁄29 1⁄29 1⁄29 1⁄29 1⁄2
Underclearancefor Pallet Jack(inches)3 3⁄83 3⁄83 3⁄83 3⁄83 3⁄83 3⁄83 3⁄8
No. ofAirbags
1111222
Max.OperatingPressure80 psi80 psi80 psi80 psi80 psi80 psi80 psi
Model
24AF25-124AF25-224AF25-324AF25-424AF50-124AF50-224AF50-3
AIR FORCE LIFT
SPECIFICATIONS: Air Bag Lift & Tilt Combination Model
PlatformSizes(inches)48 x 48
Cap.(MaxLbs.)3,000
BaseframeSize(inches)36 x 48
Travel(inches)
24
RaisedHeight(inches)38 3⁄4
LoweredHeight(inches)16 3⁄4
Underclearancefor Pallet Jack(inches)3 3⁄8
Tilt(degrees)
30
Max.OperatingPressure80 psi
Model
24AFT30 NEW!
The Autoquip Air Force tilter brings parts and hard-to-reach objects towithin easy grasp of the operator in a wide variety of industrial tiltingapplications – utilizing air, rather than hydraulics. Air Force tilters arepowered by heavy-duty Firestone Airstroke actuators, which areconnected to your plant’s shop air system. These tilters reduce theneed to reach and bend - the leading causes of back injuries inrepetitive operating environments.
The Air Force tilter comes sized in a capacityof 3,000 with 30° of available tilt.
AIR FORCE TILTER
ReinforcedAirbag
TYPICAL MARKETSAutomotive & TransportationChemicals & PlasticsAerospaceFood & Drug
GENERAL APPLICATIONSExplosion Proof EnvironmentClean Room EnvironmentWash Down EnvironmentAssembly Table
19 Autoquip Corporation © 2001
ForkPockets
Dampener
KEY FEATURES· Rigid base – no lag down required· Portable base design incorporates built-in Pallet Jack
pockets· Removable gibs for easy access· Relief valve to protect airbag from over pressure· Easy access to airbag· Foot valve standard with 6' hose· Hand valve control standard with 6' hose· Operating pressure – 80 psi· Air damper to reduce “bounce”· Built and designed in accordance with ANSI MH29.2
BENEFITS· Requires no electricity· Clean – no hydraulics – no oily mess· Powered by existing shop air· Portable – easy to move with Fork Truck· Maintenance free· Explosion-proof applications
© 2001 Autoquip Corporation 20
SPECIFICATIONS:
PlatformSizes(inches)48 x 48
Capacity(Lbs.)
3,000
BaseframeSize(inches)36 x 48
Travel(degrees)
30
RaisedHeight(inches)33 1⁄2
LoweredHeight(inches)7 1⁄4
No. ofAirbags
1
Max.OperatingPressure80 psi
Model
STA-4830
AIR FORCE TILTER
21 Autoquip Corporation © 2001
Autoquip Double Pantograph lifts are designed to provide the most stablehigh travel lifting solution available in scissors lifts with minimal footprintand platform size. Double Pantograph lifts are used in a variety ofapplications where heavy loads need to be raised higher than conventionalscissors lifts are capable - as is the case with conveyor systems, freightelevation to mezzanines or other second level storage locations, and in therepair or assembly of tall products. These lifts provide an effective andeconomical solution to lifting applications which require vertical travels upto 96" and load capacities up to 6,000 pounds.
Double pantograph lifts include 8popular sized models which can beused in a wide variety of liftingapplications. 3,000 and 6,000 lb.capacities. 60" to 96" travel.
DOUBLE PANTOGRAPH LIFTS
TYPICAL MARKETSDistribution & WarehousingOEM/Systems IntegratorAutomotive & TransportationFood & Drug
GENERAL APPLICATIONSPalletizing & DepalletizingSystems with Conventional TopErgonomic PositioningMaterials Lift
Internalmounted 5 hppower unit
Velocity fuse toprevent
uncontrollabledescent
Maintenance locks foreasy accessibility topower unit andcylinder(s)
Q-Lift
DOUBLEPANTOGRAPH LIFT
KEY FEATURES· Lubricated-for-life composite bearings on all pivot points· Solid steel legs· Turned, ground, polished and hard-chromed axle pins· Double-wire braided hydraulic hoses· Velocity fuses on cylinders· Maintenance (safety) locks in base frame· Internally mounted power unit· Built and designed in accordance with ANSI MH29.1· Factory tested to 110% of capacity
BENEFITS· Maintenance-free bearings, no greasing· Minimal platform deflection· Extended bearing life· Extended hose life for added safety· High efficiency motor provides faster raising times· Easy servicing of hydraulic valve components· Easy access to hydraulic/electrical components for servicing· Controlled descent in case of severed hose — Safety first!
POWER SUPPLY The 5 hp “DP” lift motor and the 1.5 hp “Q”lift motor are internally mounted.
CUSTOM DESIGNS A number of “customized” engineeringplans are already on file for the DP Series. Additionally,Autoquip offers computerized engineering services fordevelopment of “one-of-a-kind” double pantographapplications.
© 2001 Autoquip Corporation 22
“DP” LIFT SPECIFICATIONS: 60" to 96" Travel; Capacities — 3,000 and 6,000 lbs.Travel (Inches)
6060727284849696
Capacity(Max. lbs.)
30006000300060003000600030006000
Base & Std.Min. Platform (Inches)
36x6036x6036x6036x6048x7248x7248x7248x72
Std. Max.Platform(Inches)
48x8448x8448x8448x8460x9660x9660x9660x96
LoweredHeight(Inches)
14-3/414-3/414-3/414-3/415-3/415-3/415-3/415-3/4
Raised Height(Inches)
74-3/474-3/486-3/486-3/499-3/499-3/4111-3/4111-3/4
Max. EndLoad(lbs.)
30004500300045003000450030004500
Max. SideLoad (lbs.)
20002000200020002000200020002000
SpeedSec-FPM
25-1225-1230-1230-1242-1042-1048-1048-10
Model
60DP3060DP6072DP3072DP6084DP3084DP6096DP3096DP60
ShippingWeight(lbs.)
15001500150015002000200020002000
“Q” LIFT SPECIFICATIONS: 54" to 74" Travel; Capacities — 1,000 to 5,000 lbs. — Low ProfileTravel (Inches)
54
62
65
74
Capacity(Max. lbs.)
150035005000150030005000120025004000100020003500
Base & Std.Min. Platform(Inches)
30x4230x4236x4230x5030x5036x5030x5030x5036x5030x5030x5036x50
Std. Max.Platform(Inches)
48x7248x6648x6048x7848x7248x6648x7848x7848x7248x8448x7848x72
LoweredHeight(Inches)
77710-3/410-3/410-3/4777777
Raised Height(Inches)
61616172-3/472-3/472-3/4727272818181
Max. SideLoad(lbs.)
150020002500150020002500120015002000100015002000
SpeedSec-FPM
163144163144163144163144
Model
54Q1554Q3554Q5062QS1562QS3062QS5065Q1265Q2565Q4074Q1074Q2074Q35
ShippingWeight(lbs.)
93510001100100010751190100010751190105011251240
Max. EndLoad(lbs.)
150020002500150020002500120015002000100015002000
KEY FEATURES· Lubricated-for-life composite bearings on all pivot points· Solid steel legs· Turned, ground, polished and hard-chromed axle pins· Double-wire braided hydraulic hoses· Velocity fuses on all cylinders· Super torque motor· Maintenance (safety) locks in base-frame· Internally mounted power unit· Built and designed in accordance with ANSI MH29.1· Factory tested to 110% of capacity
23 Autoquip Corporation © 2001
BENEFITS· Maintenance-free bearings, no greasing· Minimal platform deflection· Extended bearing life· Extended hose life for added safety· High efficiency motor provides faster raising times· Easy servicing of hydraulic valve components· Easy access to hydraulic/electrical components for servicing
POWER SUPPLY The super torque electric motor is internallymounted. It is available in either 1 1/2hp three phase or 3/4 hpsingle phase.
The Titan family offers a wide range of platform sizes and capabilities for allyour unique lifting needs. This family of lifts served as the foundation formany of the lifts that Autoquip currently manufactures. With Autoquip'sengineering department, this lift can be designed to meet all of those“special application” needs.
The Titan Series of Precision Tablesincludes multiple models for tough,industrial applications. 1,000 to15,000 lb.capacities. 13"to 84" travel.Other sizesavailable.
TITANPRECISION TABLES
TYPICAL MARKETSWarehousing & DistributionWoodworkingMetalworkingSystem Integration/OEM
GENERAL APPLICATIONSPalletizing/DepalletizingFeeding/ReceivingConveyor TopAssembly Table
Oversized, 3"diameter,heavy-dutyrollers for
extended life
Velocity fuseto prevent
uncontrollabledescent
Solid steel legs with leg stiffener bars for minimal
platform deflection
CUSTOM DESIGNS A number of “customized” engineering plans are already on file for the Titan Series. Addittionally, Autoquipoffers computerized engineering services for development of “one-of-a-kind” Titan applications.
© 2001 Autoquip Corporation 24
SPECIFICATIONS: 13" to 31" Travel Series
1,5002,5003,0003,5004,5006,0009,00010,00015,000
24x4824x3848x4824x4824x3824x3824x3824x3824x38
24x4824x3648x4824x4824x3624x3624x3624x3624x36
48x9648x6060x9648x9648x6048x6048x6048x6048x60
1,5002,5003,0003,5004,5006,0006,0008,0008,000
1,5002,5003,0003,0004,5004,5004,5006,5006,500
66 1/26 1/4610 1/26 3/47 1/210 3/410 3/4
19 19 1/219 1/41923 1/219 3/420 1/223 3/423 3/4
457768131116
1 1/21 1/21 1/21 1/21 1/21 1/21 1/21 1/21 1/2
112212323
640530977700650590680760800
13A3E1513A2D2513B3E30EXW13B3E3513A1D4513B2D6013C2D9013B1D10013C1D150
13"TRAVEL
1,5002,5003,0003,5004,0004,5006,0009,00013,00014,00014,500
24x4824x3848x4824x4824x3824x4824x3824x3824x3848x4824x48
24x4824x3648x4824x4824x3624x4824x3624x3624x3648x4824x48
48x9648x6060x9648x9648x6048x9648x6048x6048x6060x9648x96
1,5002,5003,0002,4004,0004,5006,0006,0008,0006,5006,500
1,5002,5003,0003,0004,0004,5004,5004,5006,5005,0005,000
66 1/26 1/4610 1/2146 3/47 1/210 3/41212
2424 1/224 1/424 28 1/23224 3/425 1/228 3/43030
661010881116212121
1 1/21 1/21 1/21 1/21 1/21 1/21 1/21 1/21 1/21 1/21 1/2
11221123333
6405309807006508255906808001,4011,000
18A3E1518A2D2518B3E3EXW18B3E3518A1D4018A4E4518B2D6018C2D9018C1D13018C4E140EXW18C4E145
18"TRAVEL
1,5002,5003,0003,5004,0006,0009,00012,000
24x4824x3848x4824x4824x3824x3824x3824x38
24x4824x3648x4824x4824x3624x3624x3624x36
48x9648x6060x9648x9648x6048x6048x6048x60
1,5002,5003,0003,5004,0006,0006,0008,000
1,5002,5003,0003,0004,0004,5004,5006,500
66 1/26 1/4610 1/26 3/47 1/210 3/4
26 26 1/226 1/426 30 1/226 3/427 1/230 3/4
67111118121923
1 1/21 1/21 1/21 1/21 1/21 1/21 1/21 1/2
11221233
640530980700650590680800
20A3E1520A2D2520B3E30EXW20B3E3520A1D4020B3D6020C2D9020C1D120
20"TRAVEL
1,5002,5003,0003,5004,0006,0008,0009,00011,50012,000
24x4824x3848x4824x4824x4824x3824x4824x3848x4824x48
24x4824x3648x4824x4824x4824x3624x4824x3648x4824x48
48x9648x6060x9648x9648x9648x6048x9648x6060x9648x96
1,5002,5003,0003,5004,0005,5006,5006,0006,5006,500
1,5002,5003,0003,0004,0004,5005,0004,5005,0005,000
66 1/26 1/4 6 126 3/412 1/47 1/21212
30 30 1/230 1/4303630 3/436 1/431 1/23636
881414211519222828
1 1/21 1/21 1/21 1/21 1/21 1/21 1/21 1/21 1/21 1/2
1122122333
6405309407008255909506801,3901,000
24A3E1524A2D2524B3E30EXW24B3E3524A4E4024B2D6024B4E8024C2D9024C4E115EXW24C4E120
24"TRAVEL
1,5002,5003,0003,5005,0006,0008,000
24x4824x3848x4824x4824x3824x4824x38
24x4824x3648x4824x4824x3624x4824x36
48x9648x6060x9648x9648x6048x9648x60
1,5002,5003,0003,5004,5004,5006,000
1,5002,5003,0003,0004,5003,0004,500
66 1/26 1/466 3/47 1/47 1/2
32 32 1/232 1/432 32 3/433 1/433 1/2
991515 152222
1 1/21 1/21 1/21 1/21 1/21 1/21 1/2
1122233
640530940700590770680
26A3E1526A2D2526B3E30EXW26B3E3526B2D5026C3E6026C2D80
26"TRAVEL
2,0004,0006,000
24x4424x4424x44
24x4224x4224x42
48x6048x7248x72
2,0002,5003,500
2,0003,5003,500
667 1/4
3737 38 1/4
91523
1 1/21 1/21 1/2
123
590640700
31A5D2031B5D4031C5D60
31"TRAVEL
Capacity(Pounds)
BaseFrame(Inches)
StandardMinimumPlatformSize(Inches)
MaximumPlatformSize(OptionalExtra Inches) SideEnd
LoweredHeight(Inches)
RaisedHeight(Inches)
RaisingTime(Seconds)
Motor(HP)
Numberof Rams
ShippingWeight(Pounds) Model No.
Maximum Loading(Standard Platform Only)
TITAN
25 Autoquip Corporation © 2001
SPECIFICATIONS: 32" to 48" Travel Series
2,0002,5003,0004,0005,0006,0007,0008,0009,0009,50010,000
24x4848x4824x4824x4824x4824x4824x4824x4824x4848x4824x48
24x4848x4824x4824x4824x4824x4824x4824x4824x4848x4824x48
36x6060x8448x8448x7248x8448x7248x7248x7248x9660x9648x96
2,0002,5003,0003,2004,5004,5006,5006,5006,5006,5006,500
2,0002,5003,0003,0003,0003,0005,0005,0005,0005,0005,000
66 1/4667 1/47 1/48 3/48 3/48 3/410 1/49 1/2
3838 1/4383839 1/439 1/440 3/440 3/440 3/441 1/241 1/2
1119191928283131313131
1 1/21 1/21 1/21 1/21 1/21 1/21 1/21 1/21 1/21 1/21 1/2
12223333333
6409407007007707709259409401,290970
32A3E2032B3E25EXW32B3E3032B3E4032C3E5032C3E6032C3E7032C4E8032C4E9032C4E95EXW32C4E100
32"TRAVEL
1,0002,0002,5003,0004,0005,0005,5006,0008,00010,00012,000
24x4824x4848x4824x4824x4824x4848x4824x4824x6424x6424x64
24x4824x4848x4824x4824x4824x4848x4824x4824x6424x6424x64
48x8436x6060x7248x8448x7248x8460x7248x7248x9648x12048x120
1,0002,0002,5002,4002,4003,0003,0003,0007,0007,0007,000
1,0002,0002,5003,0003,0003,0003,0003,0005,0005,0005,000
666 1/4667 1/47 1/27 1/411 3/418 3/418 3/4
4242 42 1/442 4243 1/443 1/243 1/447 3/454 3/454 3/4
1212212121313131383939
1 1/21 1/21 1/21 1/21 1/21 1/21 1/21 1/21 1/21 1/21 1/2
11222333333
6406409407007007701,0707801,1901,0801,080
36A3E1036A3E2026B3E25EXW36B3E3036B3E4036C3E5036C3E55EXW36C3E6036C8F8036C8F10036C8F120
36"TRAVEL
1,0002,0002,5003,0004,0004,5005,0006,0008,0009,50010,00012,000
24x6424x6448x6424x6424x6448x6424x6424x6424x6448x6424x6424x64
24x6424x6448x6424x6424x6448x6424x6424x6424x6448x6424x6424x64
30x7230x7260x12048x12048x9660x12048x12048x9648x9660x12048x12048x120
1,0002,0002,5003,0003,5003,5003,5003,5007,0007,0007,0007,000
1,0002,0002,5002,5002,5002,5002,5002,5005,0005,0005,0005,000
6 1/27 1/26 3/46 1/27 1/27 1/277 1/211 3/411 3/411 3/413 1/4
48 1/249 1/248 3/448 1/249 1/249 1/24949 1/253 3/453 3/453 3/455 1/4
15162626 2739394045454546
1 1/21 1/21 1/21 1/21 1/21 1/21 1/21 1/21 1/21 1/21 1/21 1/2
112223333333
7908201,1308608901,2429209601,1801,6821,1801,180
42A6F1042A6F2042B8F25EXW42B6F3042B6F4042C6F45EXW42C6F5042C6F6042C8F8042C8F95EXW42C8F10042C8F120
42"TRAVEL
1,0002,0002,5003,0004,0004,5005,0006,0007,5008,000
24x6424x6448x6424x6424x6448x6424x6424x6448x6424x64
24x6424x6448x6424x6424x6448x6424x6424x6448x6424x64
30x7230x7260x9648x9648x9060x12048x12048x7854x9648x96
1,0002,0002,5002,5003,5003,5003,5003,5007,0007,000
1,0002,0002,5002,5002,5002,5002,5002,5005,0005,000
6 1/27 1/26 3/46 1/27 1/27 1/277 1/210 1/410
54 1/255 1/254 3/454 1/255 1/255 1/25555 1/258 1/458
17183030304545454646
1 1/21 1/21 1/21 1/21 1/21 1/21 1/21 1/21 1/21 1/2
1122233333
7908201,1308608901,2429209601,9021,200
48A6F1048A6F2048B6F25EXW48B6F3048B6F4048C6F45EXW48C6F5048C6F6048C8F75EXW48C8F80
48"TRAVEL
Capacity(Pounds)
BaseFrame(Inches)
StandardMinimumPlatformSize(Inches)
MaximumPlatformSize(OptionalExtra Inches) SideEnd
LoweredHeight(Inches)
RaisedHeight(Inches)
RaisingTime(Seconds)
Motor(HP)
Numberof Rams
ShippingWeight(Pounds) Model No.
Maximum Loading(Standard Platform Only)
TITAN
SPECIFICATIONS: 56" to 84" Travel Series
1,0001,5002,5003,0003,5005,0006,000
24x8124x10124x8148x8124x8124x10124x101
24x8124x10124x8148x8124x8124x10124x101
30x9636x12030x9654x9630x9630x12030x120
1,0001,5002,5002,5002,5004,2004,200
1,0001,5002,0002,0002,0003,1003,100
6 3/476 3/47 1/27 1/211 1/211 1/2
62 3/46362 3/463 1/263 1/267 1/267 1/2
16222843423636
1 1/21 1/21 1/21 1/21 1/21 1/21 1/2
1223333
1,0501,0401,1201,3691,1901,6001,630
56A12F1056B13F1556B12F2556C12F30EXW56C12F3556C14F5056C14F60
56"TRAVEL
1,0001,5002,5003,0003,5004,0005,0006,000
24x8124x10124x8148x8124x8124x8124x10124x101
24x8124x10124x8148x8124x8124x8124x10124x101
30x9636x12030x9654x9630x9630x9630x12030x120
1,0001,5002,2002,5002,5002,5004,2004,200
1,0001,5002,0002,0002,0002,0003,1003,100
6 3/476 3/47 1/27 1/27 1/211 1/211 1/2
66 3/46766 3/467 1/267 1/267 1/271 1/271 1/2
1724304645453838
1 1/21 1/21 1/21 1/21 1/21 1/21 1/21 1/2
12233333
1,0501,0401,1201,3691,1901,1901,8501,600
60A12F1060B13F1560B12F2560C12F30EXW60C12F3560C12F4060C14F5060C14F60
60"TRAVEL
1,0001,5002,0002,5003,5005,0005,5006,000
24x10124x10148x10124x10124x10124x12048x10124x101
24x10124x10148x10124x10124x10124x12048x10124x101
36x14436x12054x12036x12036x14430x14454x12030x120
1,0001,5002,0002,0003,5003,5004,2004,200
1,0001,5001,5001,5003,1002,6003,1003,100
777711 1/212 1/211 1/211 1/2
7979797983 1/284 1/283 1/283 1/2
3032444430394545
1 1/21 1/21 1/21 1/21 1/21 1/21 1/21 1/2
22332333
1,0401,0601,5501,1001,5301,6001,6601,600
72B13F1072B13F1572C13F20EXW72C13F2572B14F3572C16F5072C14F55EXW72C14F60
72"TRAVEL
1,2001,5002,0003,0004,5005,000
24x12048x12024x12024x12048x12024x120
24x12048x12024x12024x12048x12024x120
60x14454x14460x14430x14454x14430x144
1,2001,5002,0003,0003,5003,500
1,2001,5002,0002,6002,6002,600
12 1/212 1/212 1/212 1/212 1/212 1/2
96 1/296 1/296 1/296 1/296 1/296 1/2
303030304545
1 1/21 1/21 1/21 1/21 1/21 1/2
222233
1,7401,9021,750 1,7902,1971,860
84B16F1284B16F15EXW84B16F2084B16F3084C16F45EXW84C16F50
84"TRAVEL
Capacity(Pounds)
BaseFrame(Inches)
StandardMinimumPlatformSize(Inches)
MaximumPlatformSize(OptionalExtra Inches) SideEnd
LoweredHeight(Inches)
RaisedHeight(Inches)
RaisingTime(Seconds)
Motor(HP)
Numberof Rams
ShippingWeight(Pounds) Model No.
Maximum Loading(Standard Platform Only)
TITAN
© 2001 Autoquip Corporation 26
27 Autoquip Corporation © 2001
Super Titans are the “Big Boys” of the Autoquip line of scissors lifts. Theseunits are capable of lifting tons of material and are fitted with oversizeplatforms to accommodate the largest of loads. The double set of scissorlegs gives added stability for the larger platform sizes offered in this series.
The Super TitanSeries includesmodels forheavy-duty,customapplications.8,000 to85,000 lb.capacities. 12"to 120" travel.
SUPER TITAN
TYPICAL MARKETSMetalworkingAerospaceAutomotive & TransportationGovernment
GENERAL APPLICATIONSAssemblyMaintenance TableConveyorFeeding & Receiving
Solid steel legsfor minimalplatformdeflection
Velocity fuse toprevent
uncontrollabledescent
Heavy-DutyRams
SUPER TITAN™
KEY FEATURES· Lubricated-for-life composite bearings on all pivot points· Solid steel legs (8", 10" or 12" X 1 1/2" thick)· Minimum platform thickness of 1/2"· Turned, ground, polished and hard-chromed axle pins· Double-wire braided hydraulic hoses· Velocity fuses on cylinders· Four-inch hydraulic rams with solid steel rods,
hard chrome plated.· Built and designed in accordance with ANSI MH29.1· Factory tested to 110% of capacity· Maintenance legs
© 2001 Autoquip Corporation 28
SPECIFICATIONS: 12" Travel Series
12"TRAVELSINGLE
LiftingCapacity(Pounds)
BaseFrame andStd. Min.PlatformSize(Inches)
Max.PermissablePlatform (AtReduced LoadRatings)Optional Extra(Inches) SideEnd
LoweredHeight(Inches)
RaisedHeight(Inches)
Approx.RaisingTime WithStd. PowerUnit(Seconds)
StandardMotor (hp)
Approx.ShippingWt. WithStd.Platform(Pounds) Model No.
Maximum Edge Load No. ofHydraulicRams
18,00023,00027,00028,00030,00034,00035,00041,00046,00052,000
42 x 6042 x 6042 x 6042 x 6042 x 6042 x 6042 x 6042 x 6042 x 6042 x 60
72 x 9672 x 9672 x 9672 x 9672 x 9672 x 9672 x 9672 x 9672 x 9672 x 96
18,00023,00027,00023,00030,00034,00027,00030,00030,00030,000
18,00023,00027,00023,00030,00034,00030,00030,00030,00030,000
12 1/215 1/218 3/412 5/821 1/224 3/415 5/81921 3/425
24 1/427 1/430 1/224 3/833 1/436 1/227 3/830 3/433 1/236 3/4
7 sec.8 sec.9 sec.9 sec.10 sec.11 sec.12 sec.13 sec.16 sec.18 sec.
5555555555
3,0003,1503,3003,2003,3503,3503,3503,5003,5503,550
12K1812L2312M2712K2812N3012V3412L3512M4112N4612V52
2223223333
12"TRAVELDOUBLEWIDE
30,00040,00045,00047,00050,00055,00060,00068,00076,00085,000
84 x 6084 x 6084 x 6084 x 6084 x 6084 x 6084 x 6084 x 6084 x 6084 x 60
96 x 9696 x 9696 x 9696 x 9696 x 9696 x 9696 x 9696 x 9696 x 9696 x 96
12 1/215 5/818 7/812 5/821 5/82515 3/41921 3/425
24 1/427 3/830 5/824 3/833 3/836 3/827 1/230 3/433 1/236 3/4
13 sec.15 sec.18 sec.20 sec.20 sec.22 sec.24 sec.28 sec.32 sec.35 sec.
5555555555
5,9006,2006,5006,3006,6006,600 6,6006,9007,0007,000
12K30DW12L40DW12M45DW12K47DW12N50DW12V55DW12L60DW12M68DW12N76DW12V85DW
4446446666
12"TRAVELDOUBLELONG
30,00040,00045,00047,00050,00055,00060,00068,00076,00085,000
42 x 12242 x 12242 x 12242 x 12242 x 12242 x 12242 x 12242 x 12242 x 12242 x 122
60 x 14460 x 14460 x 14460 x 14460 x 14460 x 14460 x 14460 x 14460 x 14460 x 144
12 1/215 5/818 7/812 5/821 5/82515 3/41921 3/425
24 1/427 3/830 5/824 3/833 3/836 3/427 1/230 3/433 1/236 3/4
13 sec.15 sec.18 sec.20 sec.20 sec.22 sec.24 sec.28 sec.32 sec.35 sec.
5555555555
5,9006,2006,5006,3006,6006,6006,6006,9007,0007,000
12K30DL12L40DL12M45DL12K47DL12N50DL12V55DL12L60DL12M68DL12N76DL12V85DL
4446446666
CONSULTSALESTO VERIFYAPPLIEDEND AND SIDELOADS
BENEFITS· Maintenance-free bearings, no greasing· Minimal platform deflection· Extended bearing life· Extended hose life for added safety· High efficiency motor provides faster raising times· Easy servicing of hydraulic valve components· Extended cylinder life· Controlled descent in case of severed hose — Safety
first!
POWER SUPPLY The remote 5 hp electric motor willsatisfactorily operate on any of the following 3 phasevoltages: 208, 220, 230, 240, 440, 460 or 480.
CUSTOM DESIGNS A number of “customized” engineeringplans are already on file for the Super Titan Series.Additionally, Autoquip offers computerized engineeringservices for development of “one-of-a-kind” Super Titanapplications.
29 Autoquip Corporation © 2001
SUPER TITAN™
SPECIFICATIONS: 18" to 24" Travel Series
18"TRAVELSINGLE
LiftingCapacity(Pounds)
BaseFrame andStd. Min.PlatformSize(Inches)
Max.PermissablePlatform (AtReduced LoadRatings)Optional Extra(Inches) SideEnd
LoweredHeight(Inches)
RaisedHeight(Inches)
Approx.RaisingTime WithStd. PowerUnit
StandardMotor (hp)
Approx.ShippingWt. WithStd.Platform(Pounds) Model No.
Maximum Edge Load No. ofHydraulicRams
18,00022,00028,00028,00031,00034,00043,00047,000
42 x 6042 x 6042 x 6042 x 6042 x 6042 x 6042 x 6042 x 60
72 x 9672 x 9672 x 9672 x 9672 x 9672 x 9672 x 9672 x 96
18,00022,00018,00028,00031,00025,00030,00030,000
18,00022,00018,00028,00031,00023,00030,00030,000
12 1/215 1/212 5/821 1/224 3/415 5/821 5/825
30 1/433 1/430 3/839 1/442 1/233 3/839 3/842 3/4
8 sec.13 sec.15 sec.14 sec.15 sec.17 sec.23 sec.26 sec.
55555555
3,0003,1503,2003,3503,3503,3503,5503,550
18K1818L2218K2818N2818V3118L3418N4318V47
22322333
24"TRAVELSINGLE
18,00020,00023,00027,00031,00035,000
42 x 6042 x 6042 x 6042 x 6042 x 6042 x 60
72 x 9672 x 9672 x 9672 x 9672 x 9672 x 96
18,00020,00023,00018,00023,00027,000
18,00020,00023,00018,00023,00027,000
12 1/215 1/218 3/412 5/815 5/818 7/8
36 1/439 1/442 1/236 3/839 3/842 5/8
12 sec.15 sec.17 sec.18 sec.22 sec.25 sec.
555555
3,0003,1503,3003,2003,3503,500
24K1824L2024M2324K2724L3124M35
222333
24"TRAVELDOUBLELONG
30,00034,00039,00042,00053,00065,000
42 x 12242 x 12242 x 12242 x 12242 x 12242 x 122
60 x 14460 x 14460 x 14460 x 14460 x 14460 x 144
12 1/215 1/218 3/412 5/815 5/818 7/8
36 1/439 1/442 1/236 3/839 3/842 5/8
24 sec. 29 sec.34 sec.36 sec.43 sec.50 sec.
555555
5,900#6,200#6,500#6,300#6,600#6,900#
24K30DL24L34DL24M39DL24K42DL24L53DL24M65DL
444666
24"TRAVELDOUBLEWIDE
30,00034,00039,00046,00053,00065,000
84 x 6084 x 6084 x 6084 x 6084 x 6084 x 60
96 x 9696 x 9696 x 9696 x 9696 x 9696 x 96
12 1/215 1/218 3/412 5/815 5/818 7/8
36 1/4391/442 1/236 3/839 3/842 5/8
24 sec.29 sec.34 sec.36 sec.43 sec.50 sec.
555555
5,9006,2006,5006,3006,6006,900
24K30DW24L34DW24M39DW24K42DW24L53DW24M65DW
444666
18"TRAVELDOUBLELONG
30,00037,00047,00048,00052,00055,00073,00080,000
42 x 12242 x 12242 x 12242 x 12242 x 12242 x 12242 x 12242 x 122
60 x 14460 x 14460 x 14460 x 14460 x 14460 x 14460 x 14460 x 144
30 1/433 1/439 3/830 3/842 3/433 3/839 1/242 3/4
30 1/433 1/439 3/830 3/842 3/433 3/839 1/242 3/4
18 sec.21 sec.29 sec.29 sec.32 sec.34 sec.46 sec.51 sec.
55555555
5,9006,2006,6006,3006,6006,6007,0007,000
18K30DL18L37DL18N47DL18K48DL18V52DL18L55DL18N73DL18V80DL
44464666
18"TRAVELDOUBLEWIDE
30,00037,00047,00048,00052,00055,00073,00080,000
84 x 6084 x 6084 x 6084 x 6084 x 6084 x 6084 x 6084 x 60
96 x 9696 x 9696 x 9696 x 9696 x 9696 x 9696 x 9696 x 96
12 1/215 1/221 5/812 5/82515 5/821 3/425
30 1/433 1/439 3/830 3/842 3/433 3/839 1/242 3/4
18 sec.21 sec.29 sec.29 sec.32 sec.34 sec.46 sec.51 sec.
55555555
5,900 6,2006,6006,3006,6006,6007,0007,000
18K30DW18L37DW18N47DW18K48DW18V52DW18L55DW18N73DW18V80DW
44464666
CONSULTSALESTO VERIFYAPPLIEDEND AND SIDELOADS
CONSULTSALESTO VERIFYAPPLIEDEND AND SIDELOADS
© 2001 Autoquip Corporation 30
SUPER TITAN™
SPECIFICATIONS: 30" to 36" Travel Series
LiftingCapacity(Pounds)
BaseFrame andStd. Min.PlatformSize(Inches)
Max.PermissablePlatform (AtReduced LoadRatings)Optional Extra(Inches) SideEnd
LoweredHeight(Inches)
RaisedHeight(Inches)
Approx.RaisingTime WithStd. PowerUnit
StandardMotor (hp)
Approx.ShippingWt. WithStd.Platform(Pounds) Model No.
Maximum Edge Load No. ofHydraulicRams
30"TRAVELDOUBLELONG
26,00030,00039,00046,000
42 x 12242 x 12242 x 12242 x 122
60 x 14460 x 14460 x 14460 x 144
12 1/215 1/212 5/815 5/8
42 1/445 1/442 3/845 3/8
29 sec.36 sec.43 sec.53 sec.
5555
5,9006,2006,3006,600
30K26DL30L30DL30K39DL30L46DL
4466
30"TRAVELDOUBLEWIDE
26,00030,00039,00046,000
84 x 6084 x 6084 x 6084 x 60
96 x 9696 x 9696 x 9696 x 96
15 5/842 1/4 45 1/442 3/8
45 3/829 sec.36 sec.43 sec.
53 sec.555
5446
6,60030K26DW30L30DW30K39DW
30L46DW65,9006,2006,300
36"TRAVELSINGLE
12,00015,00021,00021,00024,00026,00028,00031,00032,00040,00045,00050,000
42 x 6042 x 8442 x 6042 x 8442 x 8442 x 8442 x 8442 x 8442 x 8442 x 8442 x 8442 x 84
72 x 9672 x 12072 x 9672 x 12072 x 12072 x 12072 x 12072 x 12072 x 12072 x 12072 x 12072 x 120
12,00012,00018,00016,00012,00022,00026,00026,00016,00022,00026,00026,000
12 1/212 1/212 1/215 1/212 1/218 3/421 1/224 3/415 5/818 7/821 5/824 7/8
48 1/448 1/448 1/451 1/448 1/454 1/247 1/460 1/251 3/854 5/857 3/860 5/8
18 sec.21 sec.27 sec.23 sec.32 sec.26 sec.28 sec.31 sec.37 sec.41 sec.43 sec.49 sec.
555555555555
3,0003,7503,2004,0004,0504,1504,2504,2504,3004,4504,550 4,550
36K1236KK1536K2136LL2136KK2436MM2636NN2836VV3136LL3236MM4036NN4536VV50
223232223333
36"TRAVELDOUBLELONG
CONSULTSALESTO VERIFYAPPLIEDEND AND SIDELOADS
36"TRAVELDOUBLEWIDE
22,00026,00036,00036,00041,00044,00049,00053,00055,00068,00076,00085,000
84 x 6084 x 8484 x 6084 x 8484 x 8484 x 8484 x 8484 x 8484 x 8484 x 8484 x 8484 x 84
96 x 9696 x 10296 x 9696 x 12096 x 12096 x 12096 x 12096 x 12096 x 12096 x 12096 x 12096 x 120
12 1/212 1/212 5/815 1/212 5/818 7/821 5/824 7/815 5/818 7/821 3/425
48 1/448 1/448 3/851 1/448 3/854 5/857 3/860 5/851 3/854 5/857 1/260 3/4
31 sec.40 sec.53 sec.46 sec.63 sec.52 sec.56 sec.61 sec.73 sec.81 sec.86 sec.98 sec.
555555555555
5,9007,4006,3007,9008,0008,2008,4008,4008,5008,8009,0009,000
36K22DW36KK26DW36K36DW36LL36DW36KK41DW36MM44DW36NN49DW36VV53DW36LL55DW36MM68DW36NN76DW36VV85DW
446464446666
CONSULTSALESTO VERIFYAPPLIEDEND AND SIDELOADS
12,00012,00018,00016,00012,00022,00026,00026,00016,00022,00026,00026,000
22,00026,00036,00036,00041,00044,00049,00053,00055,00068,00076,00085,000
42 x 12242 x 17042 x 12242 x 17042 x 17042 x 17042 x 17042 x 17042 x 17042 x 17042 x 17042 x 170
60 x 14460 x 19260 x 14460 x 19260 x 19260 x 19260 x 19260 x 19260 x 19260 x 19260 x 19260 x 192
12 1/212 1/212 5/815 1/212 5/818 7/821 5/824 7/815 5/818 7/821 3/424 3/4
48 1/448 1/448 3/851 1/448 3/854 5/857 3/860 5/851 3/854 5/857 1/260 3/4
31 sec.40 sec.53 sec.46 sec.63 sec.52 sec.56 sec.61 sec.73 sec.81 sec.86 sec.98 sec.
555555555555
5,9007,4006,3007,9008,0008,2008,4008,4008,5008,8009,0009,000
36K22DL36KK26DL36K36DL36LL36DL36KK41DL36MM44DL36NN49DL36VV53DL36LL55DL36MM68DL36NN76DL36VV85DL
446464446666
CONSULTSALESTO VERIFYAPPLIEDEND AND SIDELOADS
30"TRAVELSINGLE
15,00018,00023,00027,000
42 x 6042 x 6042 x 6042 x 60
72 x 9672 x 9672 x 9672 x 96
15,00018,00018,00023,000
15,00018,00018,00023,000
12 1/215 1/212 1/215 1/2
42 1/445 1/442 1/445 1/4
15 sec.18 sec.22 sec.26 sec.
5555
3,0003,1503,2003,350
30K1530L1830K2330L27
2233
SUPER TITAN™
SPECIFICATIONS: 42" to 48" Travel Series
LiftingCapacity(Pounds)
BaseFrame andStd. Min.PlatformSize(Inches)
Max.PermissablePlatform (AtReduced LoadRatings)Optional Extra(Inches) SideEnd
LoweredHeight(Inches)
RaisedHeight(Inches)
Approx.RaisingTime WithStd. PowerUnit
StandardMotor (hp)
Approx.ShippingWt. WithStd.Platform(Pounds) Model No.
Maximum Edge Load No. ofHydraulicRams
42"TRAVELSINGLE
10,00014,00015,00017,00018,00021,00021,00023,00024,00026,00028,00032,00033,00040,000
42 x 11242 x 11242 x 8442 x 11242 x 11242 x 8442 x 11242 x 11242 x 8442 x 8442 x 11242 x 8442 x 11242 x 84
72 x 14472 x 14472 x 12072 x 14472 x 14472 x 12072 x 14472 x 14472 x 12072 x 12072 x 14472 x 12072 x 14472 x 120
8,00011,00012,0008,00016,00016,00018,00011,00012,00022,00016,00016,00018,00022,000
8,00011,00012,0008,00016,00016,00018,00011,00012,00022,00016,00016,00018,00022,000
12 1/215 1/212 1/212 1/218 3/415 1/221 1/215 1/212 1/218 3/418 3/415 5/821 5/818 7/8
54 1/457 1/454 1/454 1/460 1/257 1/463 1/457 1/454 1/460 1/260 1/257 3/863 3/860 5/8
21 sec.23 sec.26 sec.31 sec.26 sec.29 sec.27 sec.34 sec.37 sec.31 sec.38 sec.43 sec.40 sec.46 sec.
55555555555555
4,6004,9003,7504,9005,1504,0005,2005,2004,0504,1505,4504,3005,5004,450
42O1042P1442KK1542O1742R1842LL2142T2142P2342KK2442MM2642R2842LL3242T3342MM40
22232223323333
42"TRAVELDOUBLELONG
26,00036,00041,00044,00055,00068,000
42 x 17042 x 17042 x 17042 x 17042 x 17042 x 170
60 x 19260 x 19260 x 19260 x 19260 x 19260 x 192
12 1/215 1/212 5/818 7/815 5/818 7/8
54 1/457 1/454 3/860 5/857 3/860 5/8
51 sec.57 sec.74 sec.61 sec.84 sec.91 sec.
555555
7,5008,0008,1008,3008,6008,900
42KK26DL42LL36DL42KK41DL42MM44DL42LL55DL42MM68DL
446466
42"TRAVELDOUBLEWIDE
26,00036,00041,00044,00055,00068,000
84 x 8484 x 8484 x 8484 x 8484 x 8484 x 84
96 x 12096 x 12096 x 12096 x 12096 x 12096 x 120
12 1/215 1/212 5/818 7/815 5/818 7/8
54 1/457 1/454 3/860 5/857 3/860 5/8
51 sec.57 sec.74 sec.61 sec.84 sec.91 sec.
555555
7,5008,0008,1008,3008,6008,900
42KK26DW42LL36DW42KK41DW42MM44DW42LL55DW42MM68DW
446466
CONSULTSALESTO VERIFYAPPLIEDEND AND SIDELOADS
CONSULTSALESTO VERIFYAPPLIEDEND AND SIDELOADS
31 Autoquip Corporation © 2001
48"TRAVELDOUBLELONG
26,00036,00041,00044,00055,00068,000
42 x 17042 x 17042 x 17042 x 17042 x 17042 x 170
60 x 19260 x 19260 x 19260 x 19260 x 19260 x 192
12 1/215 1/212 5/818 7/815 5/818 7/8
60 1/463 1/460 3/866 5/863 3/866 5/8
58 sec.66 sec.87 sec.58 sec.99 sec.87 sec.
555555
7,5008,0008,1008,3008,6008,900
48KK26DL48LL36DL48KK41DL48MM44DL48LL55DL48MM68DL
446466
CONSULT SALESTO VERIFYAPPLIEDEND AND SIDELOADS
48"TRAVELSINGLE
10,00014,00015,00017,00018,00021,00021,00023,00024,00025,00028,00032,00033,00040,000
42 x 11242 x 11242 x 8442 x 11242 x 11242 x 8442 x 11242 x 11242 x 8442 x 8442 x 11242 x 8442 x 11242 x 84
72 x 14472 x 14472 x 9672 x 14472 x 14472 x 9672 x 14472 x 14472 x 9672 x 9672 x 14472 x 9672 x 14472 x 96
8,00011,00012,0008,00016,00016,00018,00011,00012,00022,00016,00016,00018,00022,000
8,00011,00012,0008,00016,00016,00018,00011,00012,00022,00016,00016,00018,00022,000
12 1/215 1/212 1/212 1/218 3/415 1/221 1/215 1/212 1/218 3/418 3/415 5/821 1/218 7/8
60 1/463 1/460 1/460 1/466 1/263 1/469 1/463 1/460 1/466 1/266 1/263 3/869 1/466 5/8
24 sec.27 sec.29 sec.35 sec.28 sec.33 sec.33 sec.40 sec.44 sec.29 sec.43 sec.49 sec.46 sec.44 sec.
55555555555555
4,6004,9003,7504,9005,1504,0005,2005,2004,0504,1505,4504,3005,5004,450
48O1048P1448KK1548O1748R1848LL2148T2148P2348KK2448MM2548R2848LL3248T3348MM40
22232223323333
© 2001 Autoquip Corporation 32
SUPER TITAN™
SPECIFICATIONS: 48" to 54" Travel Series
LiftingCapacity(Pounds)
BaseFrame andStd. Min.PlatformSize(Inches)
Max.PermissablePlatform (AtReduced LoadRatings)Optional Extra(Inches) SideEnd
LoweredHeight(Inches)
RaisedHeight(Inches)
Approx.RaisingTime WithStd. PowerUnit
StandardMotor (hp)
Approx.ShippingWt. WithStd.Platform(Pounds) Model No.
Maximum Edge Load No. ofHydraulicRams
54"TRAVELSINGLE
10,00014,00015,00016,00018,00021,00021,00023,00024,00028,00032,00033,000
42 x 11242 x 11242 x 8442 x 11242 x 11242 x 8442 x 11242 x 11242 x 8442 x 11242 x 8442 x 112
72 x 14472 x 14472 x 9672 x 14472 x 14472 x 9672 x 14472 x 14472 x 9672 x 14472 x 9672 x 144
8,00011,00012,0008,00016,00016,00018,00011,00012,00016,00016,00018,000
8,00011,00012,0008,00016,00016,00018,00011,00012,00016,00016,00018,000
12 1/215 1/212 1/212 1/218 3/415 1/221 1/215 1/212 1/218 3/415 5/821 1/2
66 1/469 1/466 1/466 1/472 1/269 1/475 1/469 1/466 1/472 1/269 3/875 1/4
27 sec.31 sec.33 sec.42 sec.34 sec.37 sec.36 sec.46 sec.45 sec.51 sec.46 sec.54 sec.
555555555555
4,6004,9003,7504,9005,1504,0005,2005,2004,0505,4504,3005,500
54O1054P1454KK1554O1654R1854LL2154T2154P2354KK2454R2854LL3254T33
222322233333
48"TRAVELDOUBLEWIDE
26,00036,00041,00044,00055,00068,000
84 x 8484 x 8484 x 8484 x 8484 x 8484 x 84
96 x 12096 x 12096 x 12096 x 12096 x 12096 x 120
96 x 10296 x 10296 x 10296 x 10296 x 10212 1/2
15 1/212 5/818 7/815 5/818 7/860 1/4
63 1/460 3/866 5/863 3/866 5/858 sec.
66 sec.87 sec.58 sec.99 sec.87 sec.5
464667,500
8,0008,1008,3008,6008,90048KK26DW
555554
CONSULT SALESTO VERIFYAPPLIEDEND AND SIDELOADS
54"TRAVELDOUBLELONG
17,00024,00026,00028,00031,00036,00036,00039,00041,00047,00055,00056,000
42 x 22642 x 22642 x 17042 x 22642 x 22642 x 17042 x 22642 x 22642 x 17042 x 22642 x 17042 x 226
72 x 26472 x 26460 x 19272 x 26472 x 26460 x 19272 x 26472 x 26460 x 19272 x 26460 x 19272 x 264
12 1/215 1/212 1/212 1/218 3/415 1/221 1/215 5/812 5/818 7/815 5/821 5/8
66 1/469 1/466 1/466 1/472 1/269 1/475 1/469 3/866 3/872 5/869 3/875 3/8
56 sec.61 sec.65 sec.83 sec.67 sec.73 sec.71 sec.111 sec.89 sec.101 sec.111 sec.107 sec.
555555555555
9,2009,8007,5009,80010,3008,00010,40010,4008,10010,9008,60011,000
54O17DL54P24DL54KK26DL54O28DL54R31DL54LL36DL54T36DL54P39DL54KK41DL54R47DL54LL55DL54T56DL
444644466666
54"TRAVELDOUBLEWIDE
17,00024,00026,00028,00031,00036,00036,00039,00041,00047,00055,00056,000
84 x 11284 x 11284 x 8484 x 11284 x 11284 x 8484 x 11284 x 11284 x 8484 x 11284 x 8484 x 112
96 x 14496 x 14496 x 9696 x 14496 x 14496 x 9696 x 14496 x 14496 x 9696 x 14496 x 9696 x 144
12 1/215 1/212 1/212 1/218 3/415 1/221 1/215 5/812 5/818 7/815 5/821 5/8
66 1/469 1/466 1/466 1/472 1/269 1/475 1/469 3/866 3/872 5/869 3/875 3/8
56 sec.61 sec.65 sec.83 sec.67 sec.73 sec.71 sec.92 sec.89 sec.101 sec.111 sec.107 sec.
555555555555
9,2009,8007,5009,80010,3008,00010,40010,4008,10010,9008,60011,000
54O17DW54P24DW54KK26DW54O28DW54R31DW54LL36DW54T36DW54P39DW54KK41DW54R47DW54LL55DW54T56DW
444644466666
CONSULTSALESTO VERIFYAPPLIEDEND AND SIDELOADS
33 Autoquip Corporation © 2001
SUPER TITAN™
SPECIFICATIONS: 60" to 72" Travel Series
LiftingCapacity(Pounds)
BaseFrame andStd. Min.PlatformSize(Inches)
Max.PermissablePlatform (AtReduced LoadRatings)Optional Extra(Inches) SideEnd
LoweredHeight(Inches)
RaisedHeight(Inches)
Approx.RaisingTime WithStd. PowerUnit
StandardMotor (hp)
Approx.ShippingWt. WithStd.Platform(Pounds) Model No.
Maximum Edge Load No. ofHydraulicRams
60"TRAVELSINGLE
10,00014,00015,00017,00018,00023,00024,00028,000
42 x 11242 x 11242 x 8442 x 11242 x 11242 x 11242 x 8442 x 112
72 x 14472 x 14460 x 9672 x 14472 x 14472 x 14460 x 9672 x 144
8,00011,00012,0008,00016,00011,00012,00016,000
8,00011,00012,0008,00016,00011,00012,00016,000
12 1/215 1/212 1/212 1/218 3/415 1/212 1/218 3/4
72 1/475 1/472 1/472 1/478 1/275 1/472 1/478 1/2
31 sec.34 sec.36 sec.47 sec.38 sec.51 sec.55 sec.57 sec.
55555555
4,6004,9003,7504,9005,1505,2004,0505,450
60O1060P1460KK1560O1760R1860P2360KK2460R28
22232333
60"TRAVELDOUBLELONG
18,00024,00026,00028,00031,00039,00041,00047,000
42 x 22642 x 22642 x 17042 x 22642 x 22642 x 22642 x 17042 x 226
72 x 26472 x 26460 x 19272 x 26472 x 26472 x 26460 x 19272 x 264
12 1/215 1/212 1/212 1/218 3/415 5/812 5/818 7/8
72 1/475 1/472 1/472 1/478 1/275 3/872 3/878 5/8
62 sec.68 sec.72 sec.93 sec.75 sec.102 sec.109 sec.112 sec.
55555555
9,2009,8007,5009,80010,30010,2008,10010,900
60O18DL60P24DL60KK26DL60O28DL60R31DL60P39DL60KK41DL60R47DL
44464666
60"TRAVELDOUBLEWIDE
18,00024,00026,00028,00031,00039,00041,00047,000
84 x 11284 x 11284 x 8484 x 11284 x 11284 x 11284 x 8484 x 112
96 x 14496 x 14496 x 9696 x 14496 x 14496 x 14496 x 9696 x 144
12 1/215 1/212 1/212 1/218 3/415 5/812 5/818 7/8
72 1/475 1/472 1/472 1/478 1/275 3/872 3/878 5/8
62 sec.68 sec.72 sec.93 sec.75 sec.102 sec.109 sec.112 sec.
55555555
9,2009,8007,5009,80010,30010,2008,10010,900
60O18DW60P24DW60KK26DW60O28DW60R31DW60P39DW60KK41DW60R47DW
44464666
CONSULTSALESTO VERIFYAPPLIEDEND AND SIDELOADS
67"TRAVELSINGLE
10,00014,00017,00023,000
42 x 11242 x 11242 x 11242 x 112
42 x 11242 x 11242 x 11242 x 112
8,00011,0008,00011,000
8,00011,0008,00011,000
12 1/215 1/212 1/215 1/2
79 1/482 1/479 1/482 1/4
35 sec.39 sec.53 sec.58 sec.
5555
4,6004,9004,9005,200
67O1067P1467O1767P23
2233
72"TRAVELSINGLE
10,00015,00017,00024,000
42 x 11242 x 11242 x 11242 x 112
42 x 11242 x 11242 x 11242 x 112
8,00011,0008,00011,000
8,00011,0008,00011,000
12 1/215 1/212 1/215 1/2
84 1/487 1/484 1/487 1/4
38 sec.39 sec.57 sec.56 sec.
5555
4,6004,9004,9005,200
72O1072LL1572O1772LL24
2233
72"TRAVELDOUBLELONG
18,00025,00029,00040,000
42 x 22642 x 22642 x 22642 x 226
72 x 26472 x 26472 x 26472 x 264
12 1/215 1/212 1/215 5/8
84 1/487 1/484 1/487 3/8
76 sec.77 sec.114 sec.112 sec.
5555
9,2009,8009,80010,400
72O18DL72LL25DL72O29DL72LL40DL
4466
67"TRAVELDOUBLELONG
18,00024,00028,00039,000
42 x 22642 x 22642 x 22642 x 226
72 x 22672 x 22672 x 22672 x 226
12 1/215 1/212 1/215 5/8
79 1/482 1/479 1/482 3/8
70 sec.77 sec.104 sec.115 sec.
5555
9,2009,8009,80010,400
67O18Dl67P24DL67O28DL67P39DL
4466
67"TRAVELDOUBLEWIDE
18,00024,00026,00039,000
84 x 11284 x 11284 x 11284 x 112
84 x 11284 x 11284 x 11284 x 112
12 1/215 1/212 1/215 5/8
79 1/482 1/479 1/482 3/8
70 sec.77 sec.104 sec.115 sec.
5555
9,2009,8009,80010,400
67O18DW67P24DW67O28DW67P39DW
4466
CONSULTSALESTO VERIFYAPPLIEDEND AND SIDELOADS
CONSULT SALESTO VERIFYAPPLIED END ANDSIDE LOADS
© 2001 Autoquip Corporation 34
SUPER TITAN™
SPECIFICATIONS: 72" to 120" Travel Series
LiftingCapacity(Pounds)
BaseFrame andStd. Min.PlatformSize(Inches)
Max.PermissablePlatform (AtReduced LoadRatings)Optional Extra(Inches) SideEnd
LoweredHeight(Inches)
RaisedHeight(Inches)
Approx.RaisingTime WithStd. PowerUnit
StandardMotor (hp)
Approx.ShippingWt. WithStd.Platform(Pounds) Model No.
Maximum Edge Load No. ofHydraulicRams
84"TRAVELSINGLE
8,00012,00014,00020,000
42 x 13242 x 13242 x 13242 x 132
72 x 16872 x 16872 x 16872 x 168
6,5009,0006,5009,000
6,5009,0006,5009,000
12 1/215 1/212 1/215 1/2
96 1/499 1/496 1/499 1/4
33 sec.37 sec.56 sec.55 sec.
5555
5,2005,6005,4505,900
84O884LL1284O1484LL20
2233
84"TRAVELDOUBLELONG
14,00021,00023,00034,000
42 x 26642 x 26642 x 26642 x 266
72 x 30072 x 30072 x 30072 x 300
12 1/215 1/212 1/215 1/2
96 1/499 1/496 1/499 1/4
66 sec.73 sec.111 sec.110 sec.
5555
10,40011,20010,90011,800
84O14DL84LL21DL84O23DL84LL34DL
4466
84"TRAVELDOUBLEWIDE
14,00021,00023,00034,000
84 x 13284 x 13284 x 13284 x 132
96 x 16896 x 16896 x 16896 x 168
12 1/215 1/212 1/215 1/2
96 1/499 1/496 1/4991/4
66 sec.73 sec.111 sec.110 sec.
5555
10,40011,20010,90011,800
84O14DW84LL21DW84O23DW84LL34DW
4466
72"TRAVELDOUBLEWIDE
18,00025,00029,00040,000
84 x 11284 x 11284 x 11284 x 112
84 x 11284 x 11284 x 11284 x 112
12 1/215 1/212 1/215 5/8
84 1/487 1/484 1/487 3/8
76 sec.77 sec.114 sec.112 sec.
5555
9,2009,8009,80010,400
72O18DW72LL25DW72O29DW72LL40DW
4466
CONSULT SALESTO VERIFYAPPLIED END ANDSIDE LOADS
CONSULTSALESTO VERIFYAPPLIEDEND AND SIDELOADS
96"TRAVELSINGLE
7,00011,00012,00018,000
42 x 15042 x 15042 x 15042 x 150
72 x 18072 x 18072 x 18072 x 180
5,5008,0005,5008,000
5,5008,0005,5008,000
12 1/215 1/212 1/215 1/2
108 1/4111 1/4108 1/4111 1/4
37 sec.42 sec.51 sec.58 sec.
5555
5,8006,2006,1006,500
96O796LL1196O1296LL18
2233
120"TRAVELSINGLE
5,0006,00010,00011,000
42 x 18642 x 18642 x 18642 x 186
72 x 22272 x 22272 x 22272 x 222
4,5006,0004,5006,500
4,5006,0004,5006,500
12 1/215 1/212 1/215 1/2
132 1/4135 1/4132 1/4135 1/4
36 sec.40 sec.55 sec.45 sec.
5555
7,0007,5007,3007,800
120O5120LL6120O10120LL11
2233
120"TRAVELDOUBLELONG
8,00010,00017,00020,000
42 x 37442 x 37442 x 37442 x 374
72 x 42072 x 42072 x 42072 x 420
12 1/215 1/212 1/215 1/2
132 1/4135 1/4132 1/4135 1/4
74 sec.80 sec.110 sec.90 sec.
5555
14,00015,00014,60015,600
120O8DL120LL10DL120O17DL120LL20DL
4466
120"TRAVELDOUBLEWIDE
8,00010,00017,00020,000
84 x 18684 x 18684 x 18684 x 186
96 x 22296 x 22296 x 22296 x 222
12 1/215 1/212 1/215 1/2
132 1/4135 1/4132 1/4135 1/4
74 sec.80 sec.110 sec.90 sec.
5555
14,00015,00014,60015,600
120O8DW120LL10DW120O17DW120LL20DW
4466
96"TRAVELDOUBLELONG
12,00019,00020,00031,000
42 x 30242 x 30242 x 30242 x 302
72 x 34872 x 34872 x 34872 x 348
12 1/215 1/212 1/215 1/2
108 1/4111 1/4108 1/4111 1/4
74 sec.84 sec.122 sec.115 sec.
5555
11,60012,40012,20013,000
96O13DL96LL19DL96O20DL96LL31DL
4466
96"TRAVELDOUBLEWIDE
12,00019,00020,00031,000
84 x 15084 x 15084 x 15084 x 150
96 x 18096 x 18096 x 18096 x 180
12 1/215 1/212 1/215 1/2
108 1/4111 1/4108 1/4111 1/4
74 sec.84 sec.122 sec.115 sec.
5555
11,60012,40012,20013,000
96O13DW96LL19DW96O20DW96LL31DW
4466
CONSULTSALESTO VERIFYAPPLIEDEND AND SIDELOADS
CONSULTSALESTO VERIFYAPPLIEDEND AND SIDELOADS
35 Autoquip Corporation © 2001
Autoquip Titan Upenders reposition or turn upright a wide variety of heavy,bulky objects with minimal floor space requirements. They may be used inconjunction with automated (coil car) systems or alone.
18 Models,MaximumCapacity 15,000lbs. Can BeSpecified WithLifts, CustomizingFor SpecificApplications.
TITAN UPENDERS
TYPICAL MARKETSMetal WorkingPaper MillsFoundriesAutomotive PlantsMachine Shops
GENERAL APPLICATIONSCoil Handling/ReorientationDie HandlingEngine Block Manufacturing/RepairCoil PalletizingRoll Handling
90-degree tilters, flip-flop tilters and specialhigh-hinge tilters are
also available.
Lubricatedfor life
compositebearings
Long lifefabrication
TITANUPENDER
SPECIFICATIONS: Capacities - 2,000 to 15,000 lbs.
KEY FEATURES· Lubricated-for-life composite bearings on all pivot points· Turned, ground, polished and hard-chromed axle pins· Double-wire braided hydraulic hoses· Factory tested to 110% of capacity· Super torque motor
OPTIONSCan be combined with lift(s) to raise objects to differentlevel.
CUSTOM DESIGNSIf less than 90 degrees are required, travel can be blockedto suit. Other capacities and designs available to suitspecial applications.
BENEFITS· Extended hose life for added safety· Maintenance free bearings, no greasing· Extended bearing life
POWER SUPPLY Standard power supply includes supertorque 1 1/2 hp, 3-phase motor, 115v standard controltransformer, NEMA-4 hand-held up/down pushbuttonstation.
© 2001 Autoquip Corporation 36
ModelNo. 136-30136-40136-60142-25142-50148-20148-40248-60248-80248-120248-150254-40254-50254-80254-120260-40260-60260-100
MaxCapacity(pounds) 3,0004,0006,0002,5005,0002,0004,0006,0008,00012,00015,0004,0005,0008,00012,0004,0006,00010,000
Std. Motor HP 11⁄211⁄211⁄211⁄211⁄211⁄211⁄211⁄211⁄25511⁄211⁄25511⁄255
No. ofRams112121222342234234
ShippingWeight(pounds)1,5001,5501,6501,6501,7501,7001,8002,8002,9003,0003,2003,1003,1503,3003,5003,3503,5003,700
90° CycleTime(seconds)292929292929294242415541414155414155
A363636424248484848484854545454606060
B 363636424248484848484854545454606060
C 484848545460606363636369696969757575
D 121212121212121215151515151515151515
E 451⁄2451⁄2451⁄2451⁄2451⁄2451⁄2451⁄26060606060606060606060
F 363636363636364848484848484848484848
G 43⁄443⁄443⁄443⁄443⁄443⁄443⁄451⁄251⁄251⁄251⁄251⁄251⁄251⁄251⁄251⁄251⁄251⁄2
H 131313151517171717171719191919212121
J 212121252529292929292933333333363636
D I M E N S I O N S
J
H A H
D
E
B
A
E
C
G
OPTIONAL “V” BLOCKS
37 Autoquip Corporation © 2001
The Spiralift is a highly customizable, mechanical lift which is designed forsatisfying specialized applications requiring precise travel heights. They offerrepeatability in elevation to .06" accuracy.
There are 6 popular sizedmodels in this series tochoose from with capacitiesup to 6,000 lbs. andtravels in 36" and 48".Other sizes are available.(Consult Sales.)
SPIRALIFT
100%mechanical
Leg stiffenersfor minimalplatformdeflection
Maintenancelocks
TYPICAL MARKETSSystem Integration/OEMMetalworkingAerospaceChemical & Plastics
GENERAL APPLICATIONSAssembly TableClean Room EnvironmentConveyorExplosion Proof
SPECIFICATIONS: 36" to 48" Travel; Capacities — 2,500 to 6,000 lbs.
KEY FEATURES· Lubricated-for-life composite bearings on all pivot points· Solid steel legs with leg stiffeners· Turned, ground, polished and hard-chromed axle pins· Maintenance (safety) locks in base-frame· Factory tested at 110% of rated capacity· Designed and built in accordance to ANSI MH29.1· Mechanically operated· No hydraulics· Internally mounted motor and drive mechanism· Easily adaptable to a PLC
BENEFITS· Maintenance-free bearings, no greasing· Minimal platform deflection· Extended bearing life· Can hold loads at any elevation and provide zero drift
for unlimited time· Ideal for raising to precise elevations· Ideal for clean/sterile rooms and food processing environments
POWER SUPPLY Integral power unit with 2 hp motor with brake. The electric brake motor supplied will operateon any of the following 3-phase voltages: 208, 220, 230,240, 440, 460, or 480. Specify which voltage will be used.
CUSTOM DESIGNSA number of “customized” enginering plans are alreadyon file for the Spiralift Series. Additionally, Autoquipoffers computerized engineering services for developmentof “one-of-a-kind” Spiralift applications.
© 2001 Autoquip Corporation 38
ModelNo.
36SL2536SL4036SL6048SL2548SL4048SL60
Capacity(lbs.)
2,5004,0006,0002,5004,0006,000
Travel(ins.)
363636484848
LoweredHeight(ins.)
9 1/29 1/29 1/210 1/410 1/410 1/4
RaisedHeight(ins.)
45 1/245 1/245 1/258 1/458 1/458 1/4
Max.EndLoad(lbs.)2,5003,0003,0002,5002,5002,500
Max.SideLoad(lbs.)2,5003,0003,0002,5002,5002,500
StandardPlatform &Base Frame(in.)24 x 5624 x 5624 x 5624 x 7224 x 722 4x 72
MaximumAllowablePlatform Size(in.)48 x 8048 x 8048 x 8048 x 10448 x 10448 x 104
StandardRaisingTime(sec.)181824242432
Std.Horse-powerMotor
222222
ShippingWeight(lbs.)
700725750775800825
OptionalRaisingTime(sec.)121212161616
Custom Mechanical Scissor table designs which can be designed specifically for your application:
39 Autoquip Corporation © 2001
Increases order picking productivity by positioning the operator to theappropriate height to effectively pick parts and products from horizontalcarousel systems. Provides an affordable and effective solution forcompanies requiring increases in assembly and order processing times.
CAROUSEL LIFTS
TYPICAL MARKETSWarehouse SystemsLight ManufacturingAssemblyParts Sales
GENERAL APPLICATIONSParts PickingInventory ManagementCarousel System Integration
48” handrailswith snapchains forsafe usage
Slip resistantgrit decksurface
Tecspakbumpers forsoft landings
© 2001 Autoquip Corporation 40
KEY FEATURES· Slip-resistant grit surface· “Tecspak” bumpers for soft landing· 48” high handrails with snapchains at pick openings· One 36” gate with mechanical latch· Painted “iron” blue· Capillary tubing on breather ports of cylinders to preventleaking
· One duplex outlet mounted to platform and wired to J-box· NEMA 12 up/down pushbutton mounted to lift and wired toJ-box
· Lubricated-for-life composite bearings on all pivot points· Solid steel legs· Turned, ground, polished and hard-chromed axle pins· Double-wire braided hydraulic hoses· Velocity fuses on cylinders· Maintenance leg· Up limit switch mounted and wired to J-box· Built and designed in accordance with ANSI MH29.1· Factory tested to 110% of capacity
BENEFITS· Maintenance-free bearings, no greasing· Minimal platform deflection· Extended bearing life· Extended hose life for added safety· High efficiency motor provides faster raising times· Easy servicing of hydraulic valve components· Easy access to hydraulic/electrical components forservicing
· Controlled descent in case of severed hose – Safety first!
POWER SUPPLY Remote power unit, 5 hp, high speed,HDFC motor, 11 gallon reservoir.
CUSTOM DESIGNS A number of “customized” engineeringplans are already on file for the Carousel Series.Additionally, Autoquip offers computerized engineeringservices for development of “one-of-a-kind” Carouselapplications.
OPTIONS· Soft start/stop (increase speed to 30 fpm)· Special wings· Gate interlocks
SPECIFICATIONS: 72" to 96" Travel; Capacity – 2,000 lbs.
Capacity(lbs.)
2,0002,0002,000
Travel(inches)
728496
Base Frame(inches)
58 x 9658 x 11158 x 140
StandardMinimumPlatform Size(inches)72 x 10272 x 12072 x 146
StandardMaximumPlatform Size(inches)72 x 16872 x 18072 x 228
LoweredHeight(inches)
8812
RaisedHeight(inches)
8092108
MaximumEnd Load(lbs.)
1,0001,0001,000
MaximumSide Load(lbs.)
500500500
Speed(fpm)
202020
ShippingWeight(lbs.)
360039004200
Model
CAR7220CAR8420CAR9620
Custom work platform designs to improve worker efficiency:
41 Autoquip Corporation © 2001
The Autoquip Coil Car is built to meet industry's most demanding coilhandling requirements. With the AQ Coil Car, an overhead crane is notneeded to make coil-to-mandrel transfers. Low profile units are availableand they permit loading of larger coils at normal mandrel heights.
Available with 2- or 4-wheel drive, “V” deck orflat top. Unlimited choice of pump-motorcombinations for total versatility in vertical liftsand horizontal direction.
TROJAN COIL CAR
TYPICAL MARKETSPaper & PrintingMetalworkingAutomotive & TransportationSystem Integration/OEM
GENERAL APPLICATIONSTransporting ProductsFeeding/ReceivingCoil TransferRoll Positioning
Largediameterrollers for
extended life
Heavy-dutylegs
Demagpoweredtraverse
TROJAN COIL CAR
SPECIFICATIONS:
KEY FEATURES· Lubricated-for-life composite bearings on all pivot points· Solid steel legs· Turned, ground, polished and hard-chromed axle pins· Maintenance (safety) locks in base-frame· Factory tested at 110% of rated capacity· Double-wire braided hydraulic hoses· Velocity fuses on cylinders· Eases coil to mandrel transfer· Custom designed and built for the application· All controls are NEMA-12· Standard traverse speed of 40fpm· Designed and built in accordance to ANSI MH29.1
BENEFITS· Maintenance free bearings, no greasing on pivot points· Minimal platform deflection· Extended bearing life· Controlled descent in case of severed hose — Safetyfirst!
· Custom-built — we make our equipment fit your application
· Various materials can be used on the platform to preventdamage to the coil (Polyurethane, poly-snubber rollers,Marine plywood, etc.)
· Fast traversing speed, less time for employees to bestanding around
· Heavy duty — above 8,000 lbs. capacity, 1 1/4” thicksteel legs are used
· Modular drive components for simplified maintenance
POWER SUPPLY The super torque 5 hp electric motor will satisfactorily operate on any of the following 3-phasevoltages: 208, 220, 230, 240, 440, 460 or 480.
CUSTOM DESIGNS A number of “customized” engineeringplans are already on file for the Trojan Series.Additionally, Autoquip offers computerized engineeringservices for development of “one-of-a-kind” Coil Carapplications.
© 2001 Autoquip Corporation 42
Capacities — 2,000 to 50,000 lbs.
COIL OR ROLL: MAX. ID_______ MAX.OD________ MAX. LENGTH_________MIN. ID________ MIN. OD_________ MIN. LENGTH__________ MAX. COIL OR ROLL WT. HANDLED_________________
MANDREL: CENTER LINE HT. FROM TOP OF CAR TRACK_____________
PLATFORM: STANDARD ‘V’ (RUNS PARALLEL W/TRACKS) OR IF OTHER PLEASE SPECIFY:
ROLLER PLATFORM _ CROSS CRADLE _ ROLLERS FOR COIL SNUBBING _______
TRAVERSE SPEED: STANDARD (40’ PER MIN.)________________
TRACK: TOTAL CAR TRANSPORT DISTANCE_________________
CABLE REEL: MOUNTED ON CAR ____ END MOUNT____ SIDE MOUNT____ OR SUPPLIED BY OTHERS ____
POWER SUPPLY: 3-PHASE ________VOLTS
CONTROLS:
ELECTRIC PUSHBUTTONS: PENDANT OR STANCHION MOUNT
43 Autoquip Corporation © 2001
Autoquip ram lifts are utilized when a scissors lift is not an option. Ram liftsare designed to handle the most awkward and heaviest loads and can reachheights where scissors lifts become unstable. Completely customizable,these lifts have very few moving parts and they offer the greatest flexibilityas to platform size, travel and capacity. These lifts require a pit and usuallybecome permanent installations. They are ideal for concentrated, rollingloads of all kinds.
Ram lifts can raise and position heavy loads, lift stageplatforms, lift rail cars or airliners for servicing, or liftspecialized air cargo pallets.
PLATFORM RAM LIFT
TYPICAL MARKETSAerospaceAutomotive & TransportationGovernmentSystem Integrator/OEM
GENERAL APPLICATIONSMaintenance TableAt the DockConveyersFeeding/Receiving
Maintenance-free bearings
Dual rams arecable equalizedfor syncronization
of rams
PLATFORMRAM LIFT
KEY FEATURES· One moving part· Fluid prison seal on ram· Bearing length of approximately 24" to 36" or more· Wear-proof bearing· Non-rotator· Low pressure system· Platform constructed of 4-way tread plate· Hard-piped hydraulics
BENEFITS· Maintenance-free bearings, no greasing· Fractional deflection· Extended bearing life· Higher travel with less deflection· Ideal for eccentric loads
POWER SUPPLY The power unit includes a heavy-duty,continuous-duty motor, hydraulic pump, check valve, oilreservoir, lowering valve, and suction strainers. The exactmotor supplied will depend on model chosen. However, allare 3-phase and capable of operating on 208, 220, 230,240, 440, 460 or 480 volts.
CUSTOM DESIGNS A number of “customized” engineeringplans are already on file for the Ram Lifts. Additionally,Autoquip offers computerized engineering services fordevelopment of “one-of-a-kind” Ram Lift applications.
© 2001 Autoquip Corporation 44
SPECIFICATIONS: 6,000 to 30,000 lbs. Capacities — Travel to 60"
Platform Size(inches)48 x 4848 x 7272 x 7272 x 9672 x 12096 x 9696 x 120
LiftingCapacity(pounds)6,0006,0006,0006,0006,0006,0006,000
Axle LoadCenteredOver Ends3,5003,5003,5003,5003,5003,5003,500
CenteredOverSides3,5003,5003,5003,5003,5003,5003,500
Travel(inches)
60606060606060
Travel(inches)
606060606060606060606060606060606060606060606060
Ram
(1) 10Q(1) 10Q(1) 10Q(1) 10Q(1) 10Q(1) 10Q(1) 10Q
Ram
(2) 10Q(2) 12Q(2) 12QEH(2) 12QSD(2) 10Q(2) 12Q(2) 12QEH(2) 12QSD(2) 10Q(2) 12Q(2) 12QEH(2) 12QSD(2) 10Q(2) 12Q(2) 12QEH(2) 12QSD(2) 10Q(2) 12Q(2) 12QEH(2) 12QSD(2) 10Q(2) 12Q(2) 12QEH(2) 12QSD
RaisingTime Std.Motor (fpm)7777777
RaisingTime Std.Motor (fpm)644464446444644464446444
RaisingTime Opt.Motor (fpm)128881288812888128881288812888
Motor H.P.Std. Motor(hp)5555555
Motor H.P. Std.Motor (hp)
7 1/257 1/2107 1/257 1/2107 1/257 1/210107 1/27 1/210107 1/27 1/210107 1/27 1/210
Motor HP Opt.Motor(hp)151015201510152015101520201515202015152020151520
ModelNo.
APE-0APE-1APE-2APE-3APE-4APE-5APE-6
ModelNo.
DRAPE-1DRAPE-2DRAPE-3DRAPE-4DRAPE-5DRAPE-6DRAPE-7DRAPE-8DRAPE-9DRAPE-10DRAPE-11DRAPE-12DRAPE-13DRAPE-14DRAPE-15DRAPE-16DRAPE-17DRAPE-18DRAPE-19DRAPE-20DRAPE-21DRAPE-22DRAPE-23DRAPE-24
Shipping Wt.(pounds) Approx.With Skirts1,5401,7002,0002,3002,5402,6202,940
Shipping Wt.(pounds) Approx.No Skirts4,7005,8506,7508,1505,0006,2507,2508,7005,4006,6507,7009,2505,6506,7007,6509,1506,1007,2008,2509,8506,5507,7508,85010,500
ShippingWt.(pounds)1,8602,1002,4802,8603,2203,3403,820
Shipping Wt.(pounds) Approx.With Skirts5,4206,5707,4708,8705,7607,0108,0109,4606,2007,4508,50010,0506,4807,5308,4809,9806,9808,0809,13010,7307,4708,6709,77011,420
APE Selection Chart — Single Ram 20,000 LB. ROLLOVER STANDARD
DRAPE Selection Chart — Double Ram Cable EqualizedPlatform Size(inches)
72 x 144
84 x 144
96 x 144
72 x 180
84 x 180
96 x 180
LiftingCapacity(pounds)
15,00020,00025,00030,00015,00020,00025,00030,00015,00020,00025,00030,00015,00020,00025,00030,00015,00020,00025,00030,00015,00020,00025,00030,000
Axle LoadCenteredOver Ends12,00016,00020,00024,00012,00016,00020,00024,00012,00016,00020,00024,00012,00016,00020,00024,00012,00016,00020,00024,00012,00016,00020,00024,000
CenteredOverSides12,00016,00016,00024,00011,00016,00014,00024,00010,00015,00013,00024,00012,00016,00016,00024,00011,00016,00014,00024,00010,00015,00013,00024,000
45 Autoquip Corporation © 2001
Access Plate - removable or hinged platein platform surface which allows access topower unit and hydraulics when lift indown position
Accordion Skirting - covers scissors mecha-nism between platform and base. Stitchedvinyl coated polyester with alternatingblack and yellow folds. Requires oversizeplatform for mounting, must specify eitherstandard, perimeter inboard or outboarddesign. Dos not provide toe protection
Added Rollover Capacity - lift structure is“beefed up” for use in pit mounted instal-lations where truck traffic or load transferis experienced in the lowered position
Air Bag Actuation - inflatable air bag pro-vides travel. Use when electrical power isnot available and/or desirable. Clean roomor explosion proof
Anti-skid Surface - diamond tread or abra-sive material applied to lift platform
Approach Ramp - hinged or fixed plate withstructural support from the floor level tothe top of lift platform
Automatic Indexing - optical or mechanicalsensing to position platform at presetheight
Ball Transfer Surface - ball type conveyorsbuilt into platform, either fixed orretractable
Base Frame, Narrow - Special applicationsonly
Base Frame, Wide - extra stability for widerthan normal loads with higher edge loadcapacity requirements
Base Unit, Added Build-Up - increases low-ered height and provides under-clearance
Casters - Fixed or swivel, can be positionedin a variety of configurations for portabilityand transportability. (See drawings underheading GENERAL INFORMATION)
Coatings, Colors and Epoxy - customer canselect colors and formulations of paint
Controls, Press and Release - push buttoncontrol of up down plus an emergencystop button. Travel ceases automatically atpreset level
GLOSSARY OFOPTIONS & ACCESSORIES
Controls, Constant Pressure (Dead Man’s) -Push button control of travel which whenfinger is removed from the button, travelstops
Controls, Quick Disconnect - for use withportable or frequently relocated lifts. (Notavailable for power supply)
Double Acting Cylinders - where specialapplications require control of both up anddown action
Flanged Wheels - for use with flat or rail-type track to provide fixed path lateralmovement
Fork Pockets - allow unit to be readilymoved by fork truck
Handrails and Snap Chain - for use whenpersonnel must be raised or lowered.Removable rails allow access from all sideswhen lift not in use. Rails are 48” high.May require oversize platform: 4” per railfor removable handrails. (Handrail may bebolted to a mounting plate on top of thelift platform.)
Lag-down provision - for use when a unitneeds to be permanently attached to thefloor
Lifting Eye Bolts - steel eyebolts are provid-ed so lift can be lifted and/or moved with ahoist. Included with all bevel toe guardplatforms
Limit switch - stops travel and prevents overtravel. Provides height positioning and canactivate associated equipment
NEMA Rated - packages comply with NEMAstandards for outdoor, explosion-proof, andother installations (NEMA 1,2,4,12,7,9)
Operational signals - visual or audiblealarms warn personnel when lift in use
Platform, Lateral Shifting - manual or pow-ered, for use on lifts which are used as apart of a system
Platform, Stainless Steel - corrosion anddamage resistant platform for use with cor-rosive materials or in areas requiring fre-quent wash down
Portability Set - includes wheeled jack han-dle for moving lift from one area to anoth-er. Wheels at one end. (See GENERALINFORMATION)
INTRODUCTION
ii Autoquip Corporation © 2001 888-811-9876 405/282-5200 fax: 405/282-8105 www.autoquip.com
Since 1947, Autoquip has been dedicated to
providing ergonomic and productive material
handling solutions to the manufacturing,
distribution and transportation industries.
Autoquip offers a variety of standard and custom
equipment for lifting, tilting, and turning to
improve the safety and efficiency of your
production system. AutCustom Lifting Solutions For Unique Material Handling Applications
With decades of experience in engineering and manufacturing solutions to material
handling problems, Autoquip can custom design products to increase your produc-
tivity and streamline work-flow. Whether you need a product raised, lowered, turned,
or tilted Autoquip has the engineering experience and manufacturing capability to
handle virtually any custom material handling project.
So, call Autoquip today for a custom material handling solution to increase your
facility’s productivity, and the safety of your employees.
© 2001 Autoquip Corporation
Acce
ss Pl
ateAc
cordi
on Sk
irting
Adde
d Roll
over
Capa
city
Air Ba
g Actu
ation
Anti-
skid
Surfa
ceAp
proac
h Ram
pAu
tomati
c Ind
exing
Ball T
ransfe
r Surf
ace
Base
Fram
e, Ad
ded B
uild-
UpBa
se Fr
ame,
Narro
wBa
se Fr
ame,
Wide
Caste
rsCo
ating
s, Co
lors a
nd Ep
oxySp
ecial
Coati
ngs
Contr
ols, C
onstan
t Pres
sure (D
ead Ma
n’s)
Contr
ols, Pr
ess an
d Rele
ase (a
utoma
tic)Co
ntrols
, Quic
k Disc
onne
ctCo
ntrols
, Wall
Mou
nted
Doub
le Ac
ting C
ylind
ersFla
nged
Whe
elsFo
rk Po
ckets
Hand
rails
and S
nap C
hain
Lag-
down
prov
ision
Liftin
g Eye
Bolts
Limit s
witch
NEMA
/UL R
ated
Opera
tiona
l sign
alsPla
tform
, Late
ral Sh
ifting
Platfo
rm, S
tainle
ss St
eel
Porta
bility
Set
Powe
r Unit
s, Air
Powe
r Unit
s, Co
ntinu
ous D
utyPo
wer U
nits,
Conti
nuou
s Run
ning
Powe
r Unit
s, DC
, JIC S
tyle
Powe
r Unit
s, DC
Powe
r Unit
s, Ov
ersize
Powe
r Unit
s, Re
mote
Powe
red Dr
iveRo
ller C
onve
yor Pl
atform
Screw
Jack
Actua
tion
Tempe
rature
Extre
mes
Throw
-over
Bridg
eTil
ter
Toe Gu
ard, B
evele
dToe
Guard
, Elec
tric
Turnt
able
Valve
s, Mi
nimum
Down
Drift
Valve
s, No
Coas
tVa
lve, U
pstop
V-dec
k Plat
form
“Vee
” Whe
elsVe
locity
Fuse
sWh
eel C
hock
Series 35 Scissors Lift
Series 35 Extra Wide
Series 35 Extra Narrow
Series 35 Double Long
Series 35 Double High
Series 35 Double Wide
Series 35 Turntables
Series 35 Tilter
Upender
Auto Tilt
Air Force Lift
Air Force Tilt
Spiralift
Auto Low
Porta-Lift Precision Tables
Double Pantograph Lifts
Super Titan
CLo-Pro
arousel
Trojan Coil Car
Ram Lifts
AVAILABLE OPTIONS & ACCESSORIES
Power Units, Air - for uses where elec-trical is unavailable or undesirableand shop air is available. Explosionproof
Power Units, Continuous Duty - powerunits equipped with motors capableof a high number of motor starts perhour
Power Units, Continuous Running -heavy duty with special cooling fea-tures. Power runs continuously.Valves are actuated to activate lift.For extremely high numbers of jogs orcycling
Power Units, DC, JIC Style (ContinuousRunning)-Built to JIC specifications
Power Units, DC - for use with batterypower
Power Units, Oversize - Higher horse-power motors and larger pumps andcomponents for increasing travel andspeed
Power Units, Remote - Remote motor.Power connection via hydraulic hoses
Powered Drive - motor and gear boxdrives at least two wheels
Push Bar - for use with wheel or casterequipped, portable units
Roller Conveyor Platform - gravity orpowered for integration with otherhandling equipment. Usually treat asa “rolling load” and derate edge loadssimilarly.
Screw Jack Actuation - gear motorworm or ball screw. Precise, repetitivepositioning
Special Coatings - coatings such asspray metalizing and steel coat areavailable and must be specified bythe customer
Temperature Extremes - special sealingand hydraulic fluids for use in abnor-mally hot or cold environments
Throw-over Bridge - hinged plate usedto bridge gap between platform sur-face and adjacent fixed height surface
Tilter - positions work at 30, 45, or 90degrees
Toe Guard, Beveled - beveled edge on plat-form serves as toe protection for worker
Toe Guard, Electric - electrical contact stopsdown movement when obstacle is encoun-tered
Turntable - manual or powered. Rotates andpositions a load ergonomically.
Valve(s), No Coast - where precise position-ing is desired. Hydraulic dump valvesdecrease upward coast
Valve(s), Minimum Down Drift - provides forpositive shutoff. For use where platformmust maintain position for extended periods
Valve, Upstop - Hydraulic component usedprimarily to physically limit the travel of scis-sors lifts which have RAM type cylinders bydepressing a plunger which diverts hydraulicflow from the cylinder to the oil reservoir
V-deck Platform - for centering of cylindri-cal loads (rolls)
“Vee” Wheels - for use with inverted angleor vee track to provide fixed path lateralmovement
Velocity Fuse(s) - prevent(s) free fall in theevent of hydraulic failure
Wall Mounted Push Button - provides fixedoperating station
Wheel Chock - automatically engages as liftraises, preventing wheeled vehicle fromrolling off platform
“The MISSION of AUTOQUIP CORPORATIONTO BE A RECOGNIZED LEADER IN THE MATERIAL HANDLING INDUSTRY THROUGH OUR COMMITMENT TO:
• Safe, innovative and timely solutions that MEET OR EXCEED CUSTOMER EXPECTATIONS.
• WORLD CLASS PERFORMANCE in all areas of our business. • An EMPLOYEE PARTNERSHIP that values creativity, participation and growth. ”
It is generally recognized that Autoquip’s growth and steady development toward its present broad product line
is a direct result of suggestions it has received from its field sales personnel and its customers. Autoquip listens.
Autoquip responds. The company has many years of experience designing and manufacturing lifting devices...
the company also has a long list of satisfied customers! Among these Autoquip product users are America’s
leading companies. Autoquip today is truly the leader when it comes to providing “Lifting Solutions” for the
world of industry today!
Warranty: One Year - Parts and Labor Autoquip warrants its scissor lifts to be free from substandard workmanship and material for a period of one year. This warranty includes all components of the lift, including all electrical and hydraulic components, parts or devices. Autoquip will provide direct or through its authorized agentthe necessary skilled labor to facilitate such repairs or replacements in a timely manner to minimize inconvenience to the end user.
One Year - Electrical and Hydraulic ComponentsUnder normal operating conditions, should substandard workmanship or material in the electrical or hydraulic components cause failure, rendering them unfit for further service, Autoquip will furnish, free of charge, replacement components for one year.
Lifetime - Hydraulic Cylinder Seals on Series 35One Year - Hydraulic Cylinder Seals on All Other EquipmentUnder normal operating conditions, should substandard workmanship or material in the hydraulic cylinder seals cause failure, rendering them unfit for further service, Autoquip will furnish, free of charge, replacement seal kit for the life of the equipment.
Five Years - Mechanical on Series 35One Year - Mechanical on All Other MachinesFor a period of five years from date of installation, Autoquip will warrant the structure of the lift against breakage or failure of all mechanical components due to substandard design, workmanship, or material. Our obligation under this warranty is limited to repair or replacement at our option, of any part or material which proves to be substandard. Evidence of physical abuse or capacity overload shall void this mechanical warranty.
All warranties apply only to the original installation and commence from date of installation provided the lift is put into service not later than (6) months after original shipment from Autoquip. This warranty is valid only if the lift is maintained and operated as required by the Owner’s Manual. Improprieties including, but not limited to, overloading, abuse, negligence, or failure to maintain or adjust the equipment properly, will void the equipment warranty. The warranty is also voided if unauthorized parts or equipment are installed, or modifications are made.
IC-1001888-811-9876 405/282-5200 fax: 405/282-8105 www.autoquip.com © 2001 Autoquip Corporation
GLOSSARY OFOPTIONS & ACCESSORIES
Autoquip Corporation © 2001
Power Units, Air - for uses where elec-trical is unavailable or undesirableand shop air is available. Explosionproof
Power Units, Continuous Duty - powerunits equipped with motors capableof a high number of motor starts perhour
Power Units, Continuous Running -heavy duty with special cooling fea-tures. Power runs continuously.Valves are actuated to activate lift.For extremely high numbers of jogs orcycling
Power Units, DC, JIC Style (ContinuousRunning)-Built to JIC specifications
Power Units, DC - for use with batterypower
Power Units, Oversize - Higher horse-power motors and larger pumps andcomponents for increasing travel andspeed
Power Units, Remote - Remote motor.Power connection via hydraulic hoses
Powered Drive - motor and gear boxdrives at least two wheels
Push Bar - for use with wheel or casterequipped, portable units
Roller Conveyor Platform - gravity orpowered for integration with otherhandling equipment. Usually treat asa “rolling load” and derate edge loadssimilarly.
Screw Jack Actuation - gear motorworm or ball screw. Precise, repetitivepositioning
Special Coatings - coatings such asspray metalizing and steel coat areavailable and must be specified bythe customer
Temperature Extremes - special sealingand hydraulic fluids for use in abnor-mally hot or cold environments
Throw-over Bridge - hinged plate usedto bridge gap between platform sur-face and adjacent fixed height surface
Tilter - positions work at 30, 45, or 90degrees
Toe Guard, Beveled - beveled edge on plat-form serves as toe protection for worker
Toe Guard, Electric - electrical contact stopsdown movement when obstacle is encoun-tered
Turntable - manual or powered. Rotates andpositions a load ergonomically.
Valve(s), No Coast - where precise position-ing is desired. Hydraulic dump valvesdecrease upward coast
Valve(s), Minimum Down Drift - provides forpositive shutoff. For use where platformmust maintain position for extended periods
Valve, Upstop - Hydraulic component usedprimarily to physically limit the travel of scis-sors lifts which have RAM type cylinders bydepressing a plunger which diverts hydraulicflow from the cylinder to the oil reservoir
V-deck Platform - for centering of cylindri-cal loads (rolls)
“Vee” Wheels - for use with inverted angleor vee track to provide fixed path lateralmovement
Velocity Fuse(s) - prevent(s) free fall in theevent of hydraulic failure
Wall Mounted Push Button - provides fixedoperating station
Wheel Chock - automatically engages as liftraises, preventing wheeled vehicle fromrolling off platform
“The MISSION of AUTOQUIP CORPORATIONTO BE A RECOGNIZED LEADER IN THE MATERIAL HANDLING INDUSTRY THROUGH OUR COMMITMENT TO:
• Safe, innovative and timely solutions that MEET OR EXCEED CUSTOMER EXPECTATIONS.
• WORLD CLASS PERFORMANCE in all areas of our business. • An EMPLOYEE PARTNERSHIP that values creativity, participation and growth. ”
It is generally recognized that Autoquip’s growth and steady development toward its present broad product line
is a direct result of suggestions it has received from its field sales personnel and its customers. Autoquip listens.
Autoquip responds. The company has many years of experience designing and manufacturing lifting devices...
the company also has a long list of satisfied customers! Among these Autoquip product users are America’s
leading companies. Autoquip today is truly the leader when it comes to providing “Lifting Solutions” for the
world of industry today!
Warranty: One Year - Parts and Labor Autoquip warrants its scissor lifts to be free from substandard workmanship and material for a period of one year. This warranty includes all components of the lift, including all electrical and hydraulic components, parts or devices. Autoquip will provide direct or through its authorized agentthe necessary skilled labor to facilitate such repairs or replacements in a timely manner to minimize inconvenience to the end user.
One Year - Electrical and Hydraulic ComponentsUnder normal operating conditions, should substandard workmanship or material in the electrical or hydraulic components cause failure, rendering them unfit for further service, Autoquip will furnish, free of charge, replacement components for one year.
Lifetime - Hydraulic Cylinder Seals on Series 35One Year - Hydraulic Cylinder Seals on All Other EquipmentUnder normal operating conditions, should substandard workmanship or material in the hydraulic cylinder seals cause failure, rendering them unfit for further service, Autoquip will furnish, free of charge, replacement seal kit for the life of the equipment.
Five Years - Mechanical on Series 35One Year - Mechanical on All Other MachinesFor a period of five years from date of installation, Autoquip will warrant the structure of the lift against breakage or failure of all mechanical components due to substandard design, workmanship, or material. Our obligation under this warranty is limited to repair or replacement at our option, of any part or material which proves to be substandard. Evidence of physical abuse or capacity overload shall void this mechanical warranty.
All warranties apply only to the original installation and commence from date of installation provided the lift is put into service not later than (6) months after original shipment from Autoquip. This warranty is valid only if the lift is maintained and operated as required by the Owner’s Manual. Improprieties including, but not limited to, overloading, abuse, negligence, or failure to maintain or adjust the equipment properly, will void the equipment warranty. The warranty is also voided if unauthorized parts or equipment are installed, or modifications are made.
IC-1001 © 2001 Autoquip Corporation
GLOSSARY OFOPTIONS & ACCESSORIES
Autoquip Corporation © 2001 888-811-9876 405/282-5200 fax: 405/282-8105 www.autoquip.com
Controls, Constant Pressure (Dead Man’s) -Push button control of travel which whenfinger is removed from the button, travelstops
Controls, Quick Disconnect - for use withportable or frequently relocated lifts. (Notavailable for power supply)
Double Acting Cylinders - where specialapplications require control of both up anddown action
Flanged Wheels - for use with flat or rail-type track to provide fixed path lateralmovement
Fork Pockets - allow unit to be readilymoved by fork truck
Handrails and Snap Chain - for use whenpersonnel must be raised or lowered.Removable rails allow access from all sideswhen lift not in use. Rails are 48” high.May require oversize platform: 4” per railfor removable handrails. (Handrail may bebolted to a mounting plate on top of thelift platform.)
Lag-down provision - for use when a unitneeds to be permanently attached to thefloor
Lifting Eye Bolts - steel eyebolts are provid-ed so lift can be lifted and/or moved with ahoist. Included with all bevel toe guardplatforms
Limit switch - stops travel and prevents overtravel. Provides height positioning and canactivate associated equipment
NEMA Rated - packages comply with NEMAstandards for outdoor, explosion-proof, andother installations (NEMA 1,2,4,12,7,9)
Operational signals - visual or audiblealarms warn personnel when lift in use
Platform, Lateral Shifting - manual or pow-ered, for use on lifts which are used as apart of a system
Platform, Stainless Steel - corrosion anddamage resistant platform for use with cor-rosive materials or in areas requiring fre-quent wash down
Portability Set - includes wheeled jack han-dle for moving lift from one area to anoth-er. Wheels at one end. (See GENERALINFORMATION)
INTRODUCTION
ii Autoquip Corporation © 2001 888-811-9876 405/282-5200 fax: 405/282-8105 www.autoquip.com
Since 1947, Autoquip has been dedicated to
providing ergonomic and productive material
handling solutions to the manufacturing,
distribution and transportation industries.
Autoquip offers a variety of standard and custom
equipment for lifting, tilting, and turning to
improve the safety and efficiency of your
production system. AutCustom Lifting Solutions For Unique Material Handling Applications
With decades of experience in engineering and manufacturing solutions to material
handling problems, Autoquip can custom design products to increase your produc-
tivity and streamline work-flow. Whether you need a product raised, lowered, turned,
or tilted Autoquip has the engineering experience and manufacturing capability to
handle virtually any custom material handling project.
So, call Autoquip today for a custom material handling solution to increase your
facility’s productivity, and the safety of your employees.
888-811-9876 405/282-5200 fax: 405/282-8105 www.autoquip.com © 2001 Autoquip Corporation
Acce
ss Pl
ateAc
cordi
on Sk
irting
Adde
d Roll
over
Capa
city
Air Ba
g Actu
ation
Anti-
skid
Surfa
ceAp
proac
h Ram
pAu
tomati
c Ind
exing
Ball T
ransfe
r Surf
ace
Base
Fram
e, Ad
ded B
uild-
UpBa
se Fr
ame,
Narro
wBa
se Fr
ame,
Wide
Caste
rsCo
ating
s, Co
lors a
nd Ep
oxySp
ecial
Coati
ngs
Contr
ols, C
onstan
t Pres
sure (D
ead Ma
n’s)
Contr
ols, Pr
ess an
d Rele
ase (a
utoma
tic)Co
ntrols
, Quic
k Disc
onne
ctCo
ntrols
, Wall
Mou
nted
Doub
le Ac
ting C
ylind
ersFla
nged
Whe
elsFo
rk Po
ckets
Hand
rails
and S
nap C
hain
Lag-
down
prov
ision
Liftin
g Eye
Bolts
Limit s
witch
NEMA
/UL R
ated
Opera
tiona
l sign
alsPla
tform
, Late
ral Sh
ifting
Platfo
rm, S
tainle
ss St
eel
Porta
bility
Set
Powe
r Unit
s, Air
Powe
r Unit
s, Co
ntinu
ous D
utyPo
wer U
nits,
Conti
nuou
s Run
ning
Powe
r Unit
s, DC
, JIC S
tyle
Powe
r Unit
s, DC
Powe
r Unit
s, Ov
ersize
Powe
r Unit
s, Re
mote
Powe
red Dr
iveRo
ller C
onve
yor Pl
atform
Screw
Jack
Actua
tion
Tempe
rature
Extre
mes
Throw
-over
Bridg
eTil
ter
Toe Gu
ard, B
evele
dToe
Guard
, Elec
tric
Turnt
able
Valve
s, Mi
nimum
Down
Drift
Valve
s, No
Coas
tVa
lve, U
pstop
V-dec
k Plat
form
“Vee
” Whe
elsVe
locity
Fuse
sWh
eel C
hock
Series 35 Scissors Lift
Series 35 Extra Wide
Series 35 Extra Narrow
Series 35 Double Long
Series 35 Double High
Series 35 Double Wide
Series 35 Turntables
Series 35 Tilter
Upender
Auto Tilt
Air Force Lift
Air Force Tilt
Spiralift
Auto Low
Porta-Lift Precision Tables
Double Pantograph Lifts
Super Titan
CLo-Pro
arousel
Trojan Coil Car
Ram Lifts
AVAILABLE OPTIONS & ACCESSORIES
Power Units, Air - for uses where elec-trical is unavailable or undesirableand shop air is available. Explosionproof
Power Units, Continuous Duty - powerunits equipped with motors capableof a high number of motor starts perhour
Power Units, Continuous Running -heavy duty with special cooling fea-tures. Power runs continuously.Valves are actuated to activate lift.For extremely high numbers of jogs orcycling
Power Units, DC, JIC Style (ContinuousRunning)-Built to JIC specifications
Power Units, DC - for use with batterypower
Power Units, Oversize - Higher horse-power motors and larger pumps andcomponents for increasing travel andspeed
Power Units, Remote - Remote motor.Power connection via hydraulic hoses
Powered Drive - motor and gear boxdrives at least two wheels
Push Bar - for use with wheel or casterequipped, portable units
Roller Conveyor Platform - gravity orpowered for integration with otherhandling equipment. Usually treat asa “rolling load” and derate edge loadssimilarly.
Screw Jack Actuation - gear motorworm or ball screw. Precise, repetitivepositioning
Special Coatings - coatings such asspray metalizing and steel coat areavailable and must be specified bythe customer
Temperature Extremes - special sealingand hydraulic fluids for use in abnor-mally hot or cold environments
Throw-over Bridge - hinged plate usedto bridge gap between platform sur-face and adjacent fixed height surface
Tilter - positions work at 30, 45, or 90degrees
Toe Guard, Beveled - beveled edge on plat-form serves as toe protection for worker
Toe Guard, Electric - electrical contact stopsdown movement when obstacle is encoun-tered
Turntable - manual or powered. Rotates andpositions a load ergonomically.
Valve(s), No Coast - where precise position-ing is desired. Hydraulic dump valvesdecrease upward coast
Valve(s), Minimum Down Drift - provides forpositive shutoff. For use where platformmust maintain position for extended periods
Valve, Upstop - Hydraulic component usedprimarily to physically limit the travel of scis-sors lifts which have RAM type cylinders bydepressing a plunger which diverts hydraulicflow from the cylinder to the oil reservoir
V-deck Platform - for centering of cylindri-cal loads (rolls)
“Vee” Wheels - for use with inverted angleor vee track to provide fixed path lateralmovement
Velocity Fuse(s) - prevent(s) free fall in theevent of hydraulic failure
Wall Mounted Push Button - provides fixedoperating station
Wheel Chock - automatically engages as liftraises, preventing wheeled vehicle fromrolling off platform
“The MISSION of AUTOQUIP CORPORATIONTO BE A RECOGNIZED LEADER IN THE MATERIAL HANDLING INDUSTRY THROUGH OUR COMMITMENT TO:
• Safe, innovative and timely solutions that MEET OR EXCEED CUSTOMER EXPECTATIONS.
• WORLD CLASS PERFORMANCE in all areas of our business. • An EMPLOYEE PARTNERSHIP that values creativity, participation and growth. ”
It is generally recognized that Autoquip’s growth and steady development toward its present broad product line
is a direct result of suggestions it has received from its field sales personnel and its customers. Autoquip listens.
Autoquip responds. The company has many years of experience designing and manufacturing lifting devices...
the company also has a long list of satisfied customers! Among these Autoquip product users are America’s
leading companies. Autoquip today is truly the leader when it comes to providing “Lifting Solutions” for the
world of industry today!
Warranty: One Year - Parts and Labor Autoquip warrants its scissor lifts to be free from substandard workmanship and material for a period of one year. This warranty includes all components of the lift, including all electrical and hydraulic components, parts or devices. Autoquip will provide direct or through its authorized agentthe necessary skilled labor to facilitate such repairs or replacements in a timely manner to minimize inconvenience to the end user.
One Year - Electrical and Hydraulic ComponentsUnder normal operating conditions, should substandard workmanship or material in the electrical or hydraulic components cause failure, rendering them unfit for further service, Autoquip will furnish, free of charge, replacement components for one year.
Lifetime - Hydraulic Cylinder Seals on Series 35One Year - Hydraulic Cylinder Seals on All Other EquipmentUnder normal operating conditions, should substandard workmanship or material in the hydraulic cylinder seals cause failure, rendering them unfit for further service, Autoquip will furnish, free of charge, replacement seal kit for the life of the equipment.
Five Years - Mechanical on Series 35One Year - Mechanical on All Other MachinesFor a period of five years from date of installation, Autoquip will warrant the structure of the lift against breakage or failure of all mechanical components due to substandard design, workmanship, or material. Our obligation under this warranty is limited to repair or replacement at our option, of any part or material which proves to be substandard. Evidence of physical abuse or capacity overload shall void this mechanical warranty.
All warranties apply only to the original installation and commence from date of installation provided the lift is put into service not later than (6) months after original shipment from Autoquip. This warranty is valid only if the lift is maintained and operated as required by the Owner’s Manual. Improprieties including, but not limited to, overloading, abuse, negligence, or failure to maintain or adjust the equipment properly, will void the equipment warranty. The warranty is also voided if unauthorized parts or equipment are installed, or modifications are made.
IC-1001888-811-9876 405/282-5200 fax: 405/282-8105 www.autoquip.com © 2001 Autoquip Corporation
GLOSSARY OFOPTIONS & ACCESSORIES
Autoquip Corporation © 2001 888-811-9876 405/282-5200 fax: 405/282-8105 www.autoquip.com