Download - GPAT ONLINE CLASSES
![Page 1: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/1.jpg)
Physical PharmacyPresented by
Dr. T.E.Gopala Krishna MurthyProfessor & Principal
Bapatla College of PharmacyBapatla, Andhra Pradesh.
GPAT ONLINE CLASSES
In collaboration with A.P govt.
![Page 2: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/2.jpg)
Topics to be covered in this session
1. Matter, properties of matter
2. Micrometrics and powder rheology
3. Surface and interfacial phenomenon
4. Viscosity and rheology
5. Complexation
6. Buffers
7. Solutions
![Page 3: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/3.jpg)
1. Matter, properties of matter
– Change in the state of matter
– Latent heat and vapour pressure
– Sublimation
– Eutectic mixtures
– Relative humidity
– Liquid complexes
– Liquid crystals
– Glassy state
– Crystalline and amorphous solids
– Polymorphism
![Page 4: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/4.jpg)
• The enthalpy and entropy increases as the material
go from solid to liquid to gas
• Balance of enthalpy, entropy and temperature
determines the spontaneous process changes
• Latent heat in change of state. Heat of fusion and
heat of vaporization
Change in the state of matter
![Page 5: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/5.jpg)
Latent heat and vapour pressure
• Its depends on temperature not on the
amount of liquid
![Page 6: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/6.jpg)
Sublimation
• Transformation of a solid to vapour without passage
through liquid state
• Solid sublimes only when the pressure of the vapour
is below the triple point of that substance
• Camphor, naphthalene, P-dichlorobenzene and
iodine have triple point pressure below 1 atm.
![Page 7: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/7.jpg)
Eutectic mixtures
• Thymol- salol, salol and camphor, camphor. Chloral
hydrate, menthol- betanaphthol aspirin and
acetaminophen.
![Page 8: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/8.jpg)
Relative humidity
• Water of hydration, crystallization, adsorption,
drying , production of effervescent products
![Page 9: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/9.jpg)
Liquid complexes
• Creation of a solute structure with in a solvent
• Reduced rate of hydrolysis of benzocaine solution
containing caffeine
• Improved light stability of chlorpromazine in
solutions containing saccharin
![Page 10: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/10.jpg)
Liquid crystals
• The molecules in liquid are mobile in three directions and
rotate about three axes
• In solids, the molecules are immobile and rotations are
not possible
• Heating of lipids results intermediate liquid crystal
phases
• Biological systems lyotropic mesomorphism takes place
in presence of water
• Freedom to move, take many shapes and maintaining a
high degree of order
![Page 11: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/11.jpg)
Liquid crystals
• Prepared by heat treatment (thermo tropic), by
adding controlled amount of water
• Molecules that form liquid crystals are
✓ Organic
✓ Elongated
✓ Rectilinear in shape
rigid and posses strong dipoles and easily
polarisable groups
![Page 12: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/12.jpg)
• Nematic phase
– Parallel arrangements with restricted rotation about
at least one axis
– Might be to be thread or cable like
• Smectic phase or two dimensional crystal
– Molecular arrangement as layers
– Mobile in two directions, rotate about one axis
• Cholesteric phase
– Combination of smectic and nematic
– Thicker than smectic
![Page 13: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/13.jpg)
Properties and significance
• Mobile and possess the property of birefringence
• Change in colour with temperature
• Nematic crystals are sensitive to electric field
• Smectic for solubilisation of hydrophobic materials
• Similar structure like cell membranes
• Gall stones and atherosclerosis
![Page 14: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/14.jpg)
Glassy state
• Highly disordered or short range order
• Do not have specific melting points
• No decrease in volume at the crystallisation
temperature
![Page 15: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/15.jpg)
Crystalline and amorphous solids
• Metallic, ionic, valence and molecular bonds are
involved in solids
• Arrangement in a regularly repeating pattern in
crystalline solids
• The units can be atoms, ions or molecules.
Covalent, electrostatic attractions, van der Walls
forces and hydrogen bonding are involved.
![Page 16: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/16.jpg)
• Cubic (sodium chloride), tetragonal (urea),
hexagonal (urea) , rhombic (iodine), monoclinic
(sucrose) and triclinic (boric acid)
• Amorphous solids are super cooled liquids with
random arrangement
• Amorphous and cubic crystals are isotropic
Crystalline and amorphous solids
![Page 17: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/17.jpg)
Polymorphism
• Exist in more than one crystalline form of chemically
identical components
• Differences in melting point, IR spectra solubility
and X-ray diffraction
• Depending on factors such as storage temperature,
recrystallization solvent, rate of cooling and rate of
recrystallization
![Page 18: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/18.jpg)
2. Micromeritics and powder rheology
– Particle size and distribution
– Number and weight distribution
– Particle number
– Methods of determination of particle size
– Methods of determination of particle volume
– Methods of determination of particle surface area
![Page 19: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/19.jpg)
Particle size and distribution
• Shape and surface area of individual particles and
size range & number or weight of particles present
are important in poly disperse sample
• Equivalent spherical diameter, volume diameter,
projected diameter and stokes diameter
![Page 20: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/20.jpg)
General equation for average particle size
• P=1, 2, 3 corresponding to length, surface or volume
• P is positive for arithmetic and negative for harmonic
• Frequency distribution curve, cumulative percentage
frequency over size or under size
• The distribution may follow log normal distribution
• Log probability plot is employed for geometric mean and s.d
p
f
fp
meannd
ndd
/1
=
+
![Page 21: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/21.jpg)
Number and weight distribution
• Number distribution from microscopy and weight
distribution from sieving and sedimentation
• Inter conversion by using the Hatch-Choate
equation
gg
in dd 2'
log757.5loglog −=
![Page 22: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/22.jpg)
Particle number
• The number of particles per unit weight. It’s
determined as follows.
3
6
cnd
N =
![Page 23: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/23.jpg)
Methods of determination of particle size
• Optical microscopy
– Range of 0.2 -100 µm
– Length and breadth are only possible
– Slow and tedious
– 300- 500 particles are counted
– Aggregates can be detected
• Sieving
– As fine as 44 µ
– Sieve loading, duration and intensity of agitation and attrition
of granular materials
![Page 24: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/24.jpg)
Sedimentation
• The mean particle size is calculated with the
following equation
• Applicable to spherical shaped particles
• Free from aggregates, deflocculating agent is
required
• Flow of dispersion medium around particles is
laminar or streamline
( )gt
hd
os
ost
−=
18
![Page 25: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/25.jpg)
Sedimentation
• Pipette method, balance method and hydrometer
method are available
• Specifications of Andreasen apparatus are 550
ml vessel, 10 ml pipette 2o cm below the
suspension surface and 1- 2% suspension at
constant temperature
![Page 26: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/26.jpg)
Methods of determination of particle volume
• Coulter counter is employed
• Capable of counting 4000 per second
• Particle growth and dissolution
• Effect of antibacterial agent on growth of
microorganisms
![Page 27: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/27.jpg)
Methods of determination of particle surface area
• Adsorption method
– Amount of a gas/liquid solute that is adsorbed on
to the sample of powder to form a monolayer
– Type II isotherm may be constructed
– Based on BET equation
( )
( )
om
p
mo bpV
b
bVppV
p 11 −+=
−
![Page 28: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/28.jpg)
Methods of determination of particle surface area
• Adsorption method
– Nitrogen gas is commonly employed and the
apparatus is quantasorb
– A plot of p/V (p-p0) against p/p0 is a straight line
with a slope and intercepts b and Vm
![Page 29: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/29.jpg)
• Air permeability method
– The rate of penetration of a gas or liquid on to the
powder is related to resistance to the flow of a
liquid through a compact of powder
– Based on Kozeny- Carman equation
( )23
21
..
−
=
KI
Pt
S
AV
w
![Page 30: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/30.jpg)
1-1 Constant Pressure Regulator
1-2 Pressure Control
1-3 Air Filter
1-4 Air Pump
1-5 Dryer
1-6 Packed Powder Sample
1-7 Sample Tube
1-8 Range Control
1-9 Manometer
1-10 Calculator Chart
1-11 Manometer Level ControlFisher-sub-sieve-sizer-principle-
picture-1/HMK-22 Fisher Sub Sieve
Sizer
Fisher sub sieve sizer
![Page 31: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/31.jpg)
• Derived properties of powders
• Based on two fundamental properties size
distribution and surface area
– Porosity
– Packing arrangements
• The porosity of spherical uniform size particles
in closest and loosest packing is 26 and 48%
• Derived Properties of Powders
![Page 32: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/32.jpg)
• Densities of particles
– Bulk density,
– granule density and
– true density
• In non porous solids, true and granule densities are
equal
• For nonporous solids, displacement of helium or
mercury, benzene or water is used
g
raparticle −=1int
![Page 33: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/33.jpg)
• Densities of particles
• For porous solids and for true density helium is used
• Mercury is used for granule density
• Intra particle, inter particle and total porosity
g
berspace
−=1int
• Bulkiness
• Reciprocal of bulk density and influenced by
particle size and size distribution
![Page 34: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/34.jpg)
• Flow properties
– High density, low internal porosity offers free
flowing
• Dustibility and stickiness
![Page 35: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/35.jpg)
3. Surface and interfacial phenomenon
• Contents:
– Liquid interface
– Surface and interfacial tensions
– Surface free energy
– Measurement of surface and interfacial tensions
– Spreading coefficient
– Adsorption and liquid interface
– HLB classification
– Surface active agents
– Adsorption at solid interface
– Electrical properties of films
![Page 36: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/36.jpg)
• Liquid interface
– Cohesive forces in bulk and adhesive forces at
surface
• Surface and interfacial tensions
– The force per unit length applied parallel to the
surface/ interface
– Expressed in dyne/cm
• Surface free energy
– W=γ∆A
– Expressed in ergs
![Page 37: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/37.jpg)
• Measurement of surface and interfacial tensions
– Capillary rise, DuNouy ring , drop weight, bubble pressure,
sessile drop, and Wilhelmy plate methods are used
– Choice of method depends on the parameter to be determined,
desired accuracy and convenience, available sample size and
the effect of time on surface tension
– Temperature control is necessary
– Capillary rise method is not suitable for surface tension
– γ=1/2 rhрg
– Force required detaching a platinum- iridium ring immersed at
the surface/ interface
![Page 38: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/38.jpg)
• Spreading coefficient
– S=γ S –γ L-γ LS
• Adsorption and liquid interface
– Positive adsorption
– Negative adsorption
• Surface active agents
– Ions and molecules adsorbed at the interface
– Amphiphilic
• HLB classification
– 0-3 anti foaming agents, 3-8 W/O emulsifying agents, 7-9
wetting and spreading agents, 8-16 O/W emulsifying
agents, 13-16 detergents >16 solubiling agents
![Page 39: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/39.jpg)
• Adsorption at solid interface
– Adsorption of gas on solid surface to remove
odour , gas masks
– Adsorption of liquid on solid in decolourisation,
chromatography, detergency and wetting
– Solid-gas interface
– Solid- liquid interface
![Page 40: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/40.jpg)
• Solid-gas interface
– Physical adsorption is associated with van der Waals forces
and chemisorption's with irreversible chemical bonds
– Depends on chemical nature of the adsorbent, material used
to adsorb the gas, surface area of the adsorbent,
temperature and partial pressure of the adsorbed gas
Freundlich isotherm Langmuir isotherm
![Page 41: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/41.jpg)
• Solid- liquid interface
✓Adsorption of drugs from solution
✓Wetting WS/L=γ L (1+cos ∅)
![Page 42: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/42.jpg)
• Electrical properties of films
– Dispersed particles may have charge due to
– Selective adsorption of particular species of ions at
interface
– Ionization of groups situated at the surface of the particle
– Difference in dielectric constant between particle and
dispersion medium
– The potential at the solid surface due to potential
determining ions is called Nernst potential
– The difference in potential between the surface of the
tightly bound layer and electro neutral region of solution is
known as zeta potential.
![Page 43: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/43.jpg)
4. Viscosity
and Rheology
– Newtonian systems
– Kinematic viscosity
– Effect of temperature
– Non- Newtonian systems
– Thixotropy in formulations
– Determination of viscosity
![Page 44: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/44.jpg)
• Newtonian systems– Law of flow
– Velocity gradient or rate of shear is directly proportional to shearing stress
– Unit in CGS system is dynes/cm2.scc-1 or gm/cm. s=poise
– In SI system, Newton/m2.s-1 or Pascal.sec=10 poise
• Kinematic viscosity– The unit is stoke
• Effect of temperature– Arrhenius equation
=ityisKinematicv cos
r
v
d
d
A
F=
'
RTEvAe /=
![Page 45: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/45.jpg)
• Non- Newtonian systems
– Flocculated suspensions exhibit plastic flow and polymer
dispersions exhibit pseudo plastic
– Viscosity of pseudo plastic systems decreases with
increasing rate of shear
– Increased volume with shear is noticed with dilatants
systems (>50% solid content)
– Pseudo plastic is shear thinning and dilatants are shear
thickening
– Time dependent and time independent non Newtonian
fluids
– Lower Newtonian or zero shear viscosity
![Page 46: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/46.jpg)
dy
dukV += 0
'
'
n
vdy
duK
=
K’= Flow consistency index
n’= Flow behavior index
n’<1 = For pseudo plastic
n’>1 = For dilatant systems
Upper Newtonian viscosity
![Page 47: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/47.jpg)
• Thixotropy in formulations
– Isothermal, comparatively slow recovery of a consistency
of a material lost through shearing
– Observed in plastic and pseudo plastic systems that are
shear thinning
– Measurement of thixotropy
![Page 48: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/48.jpg)
• Determination of viscosity
– Single point and multi point instruments
– Capillary viscometer
– Based on Poiseuille's law
lV
Ptr
8
4 =
![Page 49: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/49.jpg)
• Falling sphere viscometer
• Rotational viscometer
• MacMichael type, the torque is measured against
the rotating outer cup
• Storner type, cup is stationary and the bob or rotor
is driven
• Coaxial- cylinder viscometer
• Infinite gap viscometer
• Cone and plate viscometer
• Parallel plate viscometer
![Page 50: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/50.jpg)
• Viscosity is calculated by means of Margules equation
• Applications of rheology in pharmacy
( )tB LK −=
![Page 51: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/51.jpg)
Capillary
Falling ball
Rotational viscometer
![Page 52: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/52.jpg)
5. Complexation
5.1. Classification of complexes
✓ Metal ion complexes
✓ Organic molecular complexes (charge transfer
complexes)
✓ Inclusion or occlusion complexes
5.2. Methods of preparation
5.3. Analysis
5.4. Applications
![Page 53: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/53.jpg)
• Metal ion complexes– Inorganic type
– Chelates
– Olefin type
– Aromatic type pi, sigma and sandwich
– Coordination complex contains a central metal surrounded
by electron pair donor
– 4 and 6 is the commonly observed coordination number
– Uni dental and multi dental ligands
5.1. Classification of complexes
![Page 54: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/54.jpg)
• Metal ion complexes– Chlorophyll and hemoglobin are naturally occurring
chelates
– Platinum and silver are commonly used in metal-
olefin complexes
– The red solution of iodine in benzene is due to pi bond
– Sigma complex is noticed in Friedel- Crafts reaction
– Sandwich complex is observed between d orbital of
metal and molecular orbital of aromatic ring
![Page 55: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/55.jpg)
• Organic molecular complexes (charge transfer
complexes)
– Quinhydrone type, picric acid type, caffeine and
other drug complexes and polymer type
– Electro static interactions and hydrogen bonding is
involved
– The bond distance is greater than 3A and the energy
is less than 5 kcal/mole
– Quinhydrone is formed by mixing eqimolar
concentrations of alcoholic benzoquinone and
htdroquinone , salicylic acid forms complex
![Page 56: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/56.jpg)
– Picric acid forms complex with weak bases
– Polymers containing nucleophilic oxygen can
form complexes
• Inclusion or occlusion complexes
– Channel, layer, clathrates, monomolecular and
macromolecular type
![Page 57: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/57.jpg)
5.2. Methods of preparation
– Physical mixing
– Kneading
– Co precipitation
– Solvent evaporation
![Page 58: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/58.jpg)
5.3. Analysis
– Continuous variation
– pH titration method
– Distribution method
– Solubility method
– Spectroscopy
– NMR and IR spectroscopy
– Polarography
– Circular dichroism
– DSC
– XRD
![Page 59: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/59.jpg)
5.4. Applications
– In drug delivery
– In analysis (affinity and chiral
chromatography)
– Protein binding
– In therapeutics
![Page 60: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/60.jpg)
6. Buffers
• Buffer equations
• Buffer capacity, buffer efficiency, buffer index, buffer value
• Buffers in pharmaceutical systems
• Preparation and stability
• Buffered isotonic solutions
• Measurement of tonicity
• Calculations and Methods of adjusting tonicity
![Page 61: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/61.jpg)
• Buffer equations– For weak acid and its salt
– For weak base and its salt
• Buffer capacity, buffer efficiency, buffer index, buffer value
– Maximum buffer capacity
salt
basepKpKpH bw log+−=
acid
saltpKpH a log+=
pH
B
=
( )23
33.2+
+
+=
OHK
OHKC
a
a
C576.0max =
![Page 62: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/62.jpg)
Buffers in pharmaceutical systems
Composition pH range
HCl and KCl 1.2-2.2
HCl and C8H5KO4 2.2- 4.0
NaOH and C8H5KO4 4.2-5.8
NaOH and KH2PO4 5.8-8.0
H3BO3, NaOH and
KCl
8.0-10
![Page 63: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/63.jpg)
• Preparation and stability
– Selection of a weak acid
– Selection of ratio
– Selection of individual concentration 0.05-0.5 M with buffer
capacity 0.01-0.1
– Availability, sterility, stability and freedom from toxicity
• Buffered isotonic solutions
– Hypertonic solutions causes crenated and hypotonic
solutions causes hemolysis
• Measurement of tonicity
– Hemolytic method
– Colligative properties
![Page 64: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/64.jpg)
• Calculations and Methods of adjusting tonicity
– Class I methods
• Cryoscopic method
• %w/v NaCl required=0.52-a/0.576
• Sodium chloride equivalent method
• E=17 L/M
– Class II methods
• White- Vincent method
• V=WxEx111.1
– Sprowls method
![Page 65: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/65.jpg)
CHAPTER-7
SOLUTIONS
![Page 66: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/66.jpg)
Contents» Solubility
» Solubility curves
» Types of solutions
» Effect of co-solvency, pH & other factors on
solubility
» Solubility of gases in liquids
» Solubility liquids in liquids
» Solubility of solids in liquids
» Critical solution temperature
» Law of partitioning and its applications
» Solute- solvent interactions
» Expression of concentrations
![Page 67: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/67.jpg)
Solubility• Concentration of a solute in a saturated solution at a certain
temperature
– Phase rule F=C-P+2
– Rate of solution=DA/l (C1-C2)
– Particle size, stirring, solubility and viscosity of solvent affect rate of
solution
• Descriptive terms for solubility
Descriptive termPart of solvent required per part of
solute
Very soluble Less than 1
Freely soluble From 1 to 10
Soluble From 10 to 30
Sparingly soluble From 30 to 100
Slightly soluble From 100 to 1000
Very slightly soluble From 1000 to 10,000
Practically insoluble 10,000 and over
![Page 68: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/68.jpg)
Solubility curves
![Page 69: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/69.jpg)
Types of solutions
• Solutions of solids in liquids
• Solutions of liquids in liquids
• Solutions of gases in liquids
• Solutions of solids in solids
O/W W/O W/O/W
![Page 70: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/70.jpg)
Effect of co-solvency, PH & other factors on solubility
• Co-solvent increases the solubility of un ionized
species by adjusting the polarity of the solvent
• It may decrease the dissociation of a weak
electrolyte
• The solubility of week electrolyte is influenced by the pH
o
oap
S
SSpKpH
−+= log
o
obwp
SS
SpKpKpH
−+−= log
![Page 71: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/71.jpg)
Solubility of gases in liquids
• Hcl, NH3, effervescent preparations and aerosols
• Depends on pressure ,temperature, salts and chemical
reaction
• Henrys law C2= σ р = product of solubility coefficient and
partial pressure of the gas
• Solubility decreases with temperature
• Salting out
• Henrys law not applicable in a chemical reaction
• Solubility of a gas in liquid is expressed by Henrys law
constant or Bunsen absorption coefficient α
![Page 72: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/72.jpg)
Solubility liquids in liquids
• Divided in to complete and
partial miscibility systems
• Binary and ternary
systems
![Page 73: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/73.jpg)
• Molecular connectivity (χ, zero, first and higher order). Sum of the
reciprocal of square root number
• Molecular surface area related properties like the total surface
area(TSA), hydrocarbon surface area(HYSA) and functional group
surface area(FGSA)
![Page 74: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/74.jpg)
Solubility of solids in liquids
• With or without accompanying chemical reaction in the
solvent
• Effect of temperature
• Effect of salts salting in, salting out or no alteration
• Solubility of solutes containing two or more species
common ion effect
• Solubility following a chemical reaction
• In ideal solutions heat of solution is equal to heat of
fusion
![Page 75: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/75.jpg)
Solubility of solids in liquids
• Solubility of a solid in ideal solution depends on
temperature, melting point and molar heat of fusion
• In ideal solutions, the slope of the line drawn between
log solubility (mole fraction) vs reciprocal of absolute
temperature is – ∆Hf/2,303R
• In non ideal solutions, the concentration is replaced with
activity, solubility parameter determined from heat of
vaporization, internal pressure and surface tension
• EHS Solubility approach
![Page 76: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/76.jpg)
Critical solution temperature
![Page 77: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/77.jpg)
![Page 78: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/78.jpg)
![Page 79: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/79.jpg)
Law of partitioning and its applications
K=c1/c2
• Effect of ionic dissociation and molecular
association on partition
• Extraction
• Solubility
• Preservative action
• Biological activity
![Page 80: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/80.jpg)
Solute- solvent interactions
• Like dissolves like
• Dipole moment
• Hydrogen bond
• Difference in acidic and basic constituents
• Ratio of polar to non polar groups of the molecule
![Page 81: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/81.jpg)
Expression of concentrations
• Volume of the solvent required to dissolve one gram of
solute (g/ml)
• Quantity of solute in grams dissolves in 100 ml
• Quantity of solute in grams dissolved in 100 gm
• Number of moles of solute in 1 liter of solvent
• 100 ml of saturated solution contains – gms of solute
• %w/w, %w/v, %v/v
• Molarity, molality and mole fraction
![Page 82: GPAT ONLINE CLASSES](https://reader031.vdocument.in/reader031/viewer/2022012519/619408cc52add13c4758ac47/html5/thumbnails/82.jpg)