H-Strut®
1-800-2-HAYDON [email protected] www.haydoncorp.com
H-Strut® Metal Framing & AccessoriesH-Block® Rooftop Support Systems
All Products Made in USA
Local 210 International Brotherhood of Teamsters
All products are Union made.
Member of National ElectricalManufacturers Representatives
Association
Member of Specialty Tools &Fasteners Distributors
Association
Member of the Metal Framing Manufacturing Association
Member of the Fabricators & Manufacturers Association
Foundation
Testing All Rooftop Supports have been tested by an accredited independent laboratory to the following:• ASTM D575 Method B – Modified – Compression/Deflection• ASTM D1171 Modified – Ozone Resistance• Freeze/Thaw Environmental Simulation
H-Block® Rooftop Support Systems
• Made from 100% post-consumer recycled materials
• LEED Certifiable• Patented• Meets the Buy America Act• American Reinvestment
Recovery Act (A.R.R.A.)
• No deteriorations• Corners coated with high
visibility safety ANSI orange• Dampens vibrations• Compatible with rooftop
materials• Resistance to freeze and thaw
• Solar Racking• Pipe & Conduit supports• Duct supports• HVAC supports
• Cable Tray Systems• Air Conditioning supports• Roof Walkway supports • Customizable applications
4"
1⁄2" ThroughHole
1⁄2" ThroughHole
10.875"
Width
95⁄16"47⁄8"
BaseLength
Width
95⁄16"
67⁄16"
BaseLength
Width
Strut Length
Base Length
Height
Width
Height
95⁄16"
Width
BaseLength
Height
Roller Size
BaseLength
Width
HBS-BASE SERIES HBS-10 SERIES HBS-6 SERIES HBS-CB BRIDGE SERIES HBS-CE EXTENSION SERIESHBS-R ROLLER SERIES
Specifications
Applications
HBM-BASE ONLY SERIES
HBM-5-H-164-PG HBM-HINGED PIPE CLAMP SERIES HBM-SUPPORT WITH THREADED ROD EXTENSION
Mini H-Block®
• Economical• Versatile• Used for single pipe applications• Made from 100% post-consumer recycled materials• Corners coated with high visibility safety ANSI orange• Mounting and supporting without losing strength or integrity
SpecificationsNew Product
MADEIN USA
65⁄8"
21⁄4"
5"
4"
53⁄16"3"
MADEIN USA
65⁄8"5"
413⁄16"
H-164-PGStrut Channel
MADEIN USA
65⁄8"5"
4"
Height 3⁄8” - 16 x 9" Threaded Rod
Threaded Base Plate
MADEIN USA
65⁄8"5"
4"
Height Adj.from 10" to 12"
H-132-PGStrut Channel
3⁄8” - 16 x 9" Threaded Rod
Channel Stocked in pre-galvanized,
plain & powder coated Supr-Green, in both 10 20 ft.
lengths. Available in Stainless Steel 304 & 316 Alloys.
Other materials, finishes & lengths are
available upon request.
31⁄4"
15⁄8"
27⁄16"
15⁄8"
15⁄8"
15⁄8"
13⁄8"
15⁄8" 15⁄8"
1"
15⁄8"7⁄8"
15⁄8"13⁄16"
15⁄8"13⁄16"
Hot Dipped Galvanized (HDG).....................ASTM A-123 Zinc Trivalent Chromium (ZTC)..............ASTM B-633-85Powder Coated Supr-Green.........................ASTM B-117 Powder Coated White, Black and Gray.......ASTM B-117PVC Coating 40 ML Thickness.................Upon Request
Finishes All H-Strut channels are stocked in the following finishes and
covered in the following specifications.
HDG ZTC Supr-Green PVC
Pre-Galvanized (PG)....................................ASTM A-653 Plain Steel.......................................ASTM A-1011-04-SSAluminum (Type 6063T6).............................ASTM B-221Stainless Steel (Type 304&316)...................ASTM A-240
Materials All H-Strut channels are produced from prime structual steel
covered in the following specifications.
PG Plain Steel Aluminum Stainless Steel
Welded Combinations All combinations illustrated are available in any H-Strut channels and in any
material or finish. Suffix A Suffix C Suffix C3
Styles All configurations illustrated are available in any H-Strut channels and
in any material or finish.
OS3 13⁄32” x 3” Slot, 4” on centers
OS 9⁄16” x 11⁄8” Slot, 2” on centers
RS and RS-MOD 9⁄16” or 3⁄4” Dia. Hole, 17⁄8” on centers
KO 7⁄8” Dia. Knockout, 6” on centers
The H-Strut Difference
• Raw Materials Inspection• In-line quality checks• Routine destructive testing• Shrink-wrapped painted strut
bundles
• Cleanest channel in the framing industry• Oil-free strut bundles that will keep your
warehouses and job sites free of tramp oil• Complete material traceability with full mill
certifications upon request
• A rigorous quality system guarantees our ability to exceed industry tolerances
• Buy American Act Compliant• American Reinvestment Recovery Act
Compliant (A.R.R.A.)
Accessories
AUTHORIZED DEALER OF HAYDON CORPORATION PRODUCTS
H-112Channel
Size: 31⁄4" x 15⁄8" x 12 GA
H-122Channel
Size: 27⁄16" x 15⁄8" x 12 GA
H-134Channel
Size: 15⁄8" x 15⁄8" x 14 GA
H-142Channel
Size: 13⁄8" x 15⁄8" x 12 GA
H-152Channel
Size: 1" x 15⁄8" x 12 GA
H-172Channel
Size: 7⁄8" x 15⁄8" x 12 GA
H-162Channel
Size: 13⁄16" x 15⁄8" x 12 GA
H-164Channel
Size: 13⁄16" x 15⁄8" x 14 GA
H-132Channel
Size: 15⁄8" x 15⁄8" x 12 GA
15⁄8"
15⁄8"
See Haydon’s Engineering Catalog for all H-Strut® Metal Framing Systems products and accessories. www.haydoncorp.com
Two Locations 415 Hamburg Turnpike
Wayne, NJ 074701139 West Carrier Pkwy Grand Prairie, TX 75050
Other welded combinations available upon request.
A
All-Thread RodFinish: Electro-Galvanized
Length: 6 Ft.
Rod CouplersHole Sizes: 1⁄4" thru 3⁄4"Lengths: 7⁄8" thru 2-1⁄4"
THREADED FASTENERS
C-1104Universal Clamps
C-1100EMT Clamps
C-1102Rigid Conduit Clamps
C-1101Tubing Clamps
Finish:EZN, CPR. HDGMaterial: Mild Steel, Stainless 304 & 316
PIPE CLAMPS
11⁄8" 15⁄8"
51⁄8"
9⁄16" Hole Size
KnockOut
C-900Closure Strip
(Available in Plastic)
E-501 1⁄2" or 3⁄4" Conduit Connector Plate
E-504Conduit End Cap
ELECTRICAL ACCESSORIES
31⁄2"
6"41⁄4"41⁄4"
6"
Ø3⁄4"4 Places 41⁄4"
41⁄4"
31⁄2"
6"
6"
Ø3⁄4"4 Places
B-620-ADouble Post Base
B-620-SQSingle Post Base
POST BASES
A
1⁄2" - 13Set Screw
A
3" 3⁄8" - 16Threads
23⁄8"13⁄16"
23⁄4"
Ø9⁄16"
C-401Beam Clamp
Use with H-132, H-164
C-402Beam Clamp
C-403Beam Clamp
BEAM CLAMPSBolt
Size "A"
15⁄8"
31⁄8"
F-201Square Washer
F-2054-Hole Splice Plate
FLAT PLATE FITTINGS53⁄8"
A(I.D.) 15⁄8"
71⁄4"
B-601“U” Support
B-6054-Hole Splice Channel* Use with H-132, H-134
FITTINGS
21⁄4"
15⁄8" 31⁄2"
41⁄8"
4"
4"
15⁄8"
31⁄2"
A-301Two Hole Corner
Angle
A-311Four Hole
Angle
A-322“Z"
Angle
A-335Universal Shelf
Bracket
ANGLE BRACKETS
4"
3⁄4"
4" 2"
8"
A
A
H-142-INConcrete Insert13⁄8" x 15⁄8" x 12
H-152-INConcrete Insert1" x 15⁄8" x 12 H-164-INConcrete Insert13⁄16" x 15⁄8" x 14 Ga.
1000 SeriesEnd Cap
N-1200Square Nut
for Spot Insert
H-1200Spot Insert
CONCRETE INSERTS
ACCESSORIES
Available in Stainless Steel Type 304 & 316
Material: Mild Steel, Stainless 304 & 316
Available in Tube & Pipe Sizes
CUSHION CLAMPS
Without Spring Short Spring Regular Spring Long Spring
GRIP LOCK NUTS
2"
2"
A-304No-Twist Corner Angle (2 indent)
9/16" Dia. for 1/2" ATR
E-505Snap Type Fluorescent
Fixture Hanger
E-5104-Hole Splice
Clevis with Splice Clip