Dö eme Kal p Sistemleri / Slab Formwork Systems
70
H Type Load-bearing Scaffolding SystemH Tipi Yük skelesi Sistemi
H T P YÜK SKELESH tipi a r yük iskele sistemi, ana ta y c s H çerçeveden olu an yüksek mukavemetli bir ta y c sistemdir. Ana ta y c çerçeveler 60x3 mm çelik borulardan, diagonal elemanlar ise 34x2 mm bo-rulardan üretilir. ste e ba l olarak 60x3.65 mm ana çercevelerde üretilebilmektedir. H çerçevelerin stabilitesini sa lamak için farkl boylarda üretilen diagonal elemanlar ile her türlü geni likte ta y c iskele olu turula-bilir. H çerçevelerin her bir dikey borusu 5.5 tona kadar yük ta ma kapasitesine sahiptir. H tipi yük iskelesi sistemi az say daki standart ve kurulumu kolay elemanlar ile 2 farkl uygulamaya olanak sa lar.-Masa Kal p Uygulamas-Kal p skelesi Uygulamas
H-Type Load Bearing Scaffolding SystemH type heavy load scaffolding system is a high capacity load bear-ing system with H-Frame main load bearer. Main load bearer H-frames are made from dia 60x3mm steel tubes and diagonal components are made from dia 34x2mm tubes. H frames can be produced from dia 60x3.65 mm tubes upon request. By the use of the diagonal components that produced for providing the stability of H-frames, Load bearing scaffolding system can be assem-bled at desired width value. Every single vertical prop of the H frames has load bearing capacity upto 5.5 tons.H type heavy load bearing system allows 2 different applications by the use of few, standart and easy to assemble components.- Table Formwork Application- Under mold Shoring Scaffolding
Dö eme Kal p Sistemleri / Slab Formwork Systems
71
TABLE TYPE APPLICATIONWhen used as Table type system, system consists of 2 parts (up-per and lower). Upper part consists of plywood,secondary girder,main girder and 4-way heading. Plywood is xed to secondary girders by means of screws. Secondary girders xed to main girders by connec-tion components. Upper part formed by xing the 4-way headings to the main girder.Lower part consists of H-frames,diagonals and lower adjustable jacks. Lower adjustable jacks connected to the H-frames by jack hanger. By connecting the diagonals to the ip-locks on the H-frames,lower part formed. Table type scaffolding completed by the connection of the up-per and lower parts with pins and detent pins.When used as table type system, since the displacement of the table is done by mold trolley or crane without any distmantling, assembly time of the mold minimized.
MASA KALIP UYGULAMASIMasa Kal p uygulamas nda sistem alt ve üst 2 parçadan olu ur. Üst parça; plywood, tali ta y c ( zgara), ana ta y c (mahya) ve dört yollu ba l ktan olu ur. Plywood vidalar ile tali ta y c lara ba -lan r. Tali ta y c lar ba lant elemanlar ile ana ta y c lara sabitle-nir. Dört yollu ba l klarda ana ta y c kiri lere ba lant elemanlar ile sabitlenip üst parça olu turulur.Alt parçada H çerçeveler, diagoneller ve alt ayar milleri bulunur. Alt ayar milleri çerçevelere kriko ask s ile birle tirilir. Diagoneller ise çerçeveler üzerinde bulunan kilitli pimlere geçirilerek alt parça da tamamlan r. Alt ve üst parçalar pim ve kopilya vas tas ile birbi-rine ba lanarak Masa Tipi Sistem tamamlanm olur.Masa Tipi Sistem kullan m nda, sistem sökülmeden kal p arabas yada vinç yard m ile yer de i tirildi inden kal p kurma zaman minimum düzeye iner.
Plywood
Tali Ta y cSecondary Girder
4 Yollu Ba l k4 way heading
Ana Ta y cMain Girder
Ta y c H ÇerceveLoad-bearing H Frame
Alt Ayar MiliLower adjustment Jack
Çapraz Ba lant ElemanDiagonal Connection Componet
Dö eme Kal p Sistemleri / Slab Formwork Systems
727272727727277727272722272272222227277777777272727227272227277777722722227272227222272727777727222222222227222727272772777777272722222222272722222272727777777722272722222222222777277277777777722222727272777777722222727272727727777772222272777777222227222722222277777727222222722272227777277722227222222272772722277277272777227772727722727727777777722222222777777772772222227272227222272777777772722222277777722222222277777722222222227777722222277777777227777777772222727777777777777722222277777222277222277772222222777777722222272
Dö eme Kal p Sistemleri / Slab Formwork Systems
737373737373737373733737373737373737373373737373373773377373
Dö eme Kal p Sistemleri / Slab Formwork Systems
74
Ürün Kodu
Item NoA rl k kg Weight kg
Ürün Aç klamasDescription
H ÇERÇEVE ELEMANIH Frame Component
ø60x3 mm borudan imal edilir. Farkl kule yükseklikleri için sadece 3 farkl yükseklikteki çerçeve eleman yeterli-dir.
Made from ø60x3 mm tube. Only 3 dif-ferent height H frames are enough for various tower heights.
En BoyWidth Length
150 110
150 150
150 180
110x100
110x125
110x150
110x175
110x200
110x225
110x250
110x275
150x100
150x125
150x150
150x175
150x200
150x225
150x250
150x275
180x100
180x125
180x150
180x175
180x200
180x225
180x250
180x275
22.53
25.80
29.70
5.196.027.007.778.459.60
10.5011.476.236.927.408.489.31
10.1811.0611.96
7.137.748.429.159.93
10.7411.5812.44
201503411010020150341101252015034110150201503411017520150341102002015034110225201503411025020150341102752015034150100201503415012520150341501502015034150175201503415020020150341502252015034150250201503415027520150341801002015034180125201503418015020150341801752015034180200201503418022520150341802502015034180275
2014060361511
2014060361515
2014060361518
DIAGONAL ELEMANDiagonal Component
ø 34x2.5 mm borudan imal edilir. Sis-temin stabilitesini sa lar. Her 2 çerçe-ve için 4 adet gereklidir.
Made from ø 34x2.5 mm tube. Provi-des stability of the system. 4 diagonal components needed for 2 H frames.
Dö eme Kal p Sistemleri / Slab Formwork Systems
75
Ürün Kodu
Item NoA rl k kg Weight kg
Ürün Aç klamasDescription
0.902014051300020 ÇERÇEVE B RLE T RME ELEMANIFrame Connection Component
Her çerçeve birle im noktas için 2 pim, 2 kopilya ve 1 çerçeve birle tirme eleman ge-rekir.
2 pins/2 Detent pins and 1 frame connection component for each frame joining point.
39.00
47.00
2014008000000
2014010000000
K R KU A IBeam Waler
Kiri ve dö emelerin beraber kal plana-bilmesini sa lar.
Enables forming beams and slabs to-gether.
NPU 80
NPU 100
4.90
6.13
7.36
2014000485080
2014000485100
2014000485120
AYAR M LAdjustment Jack
Farkl kiri yükseklikleri için ayarlanabilir.
Adjustable for different beam heights.
L= 80 cm
L=100 cm
L=120 cm
Dö eme Kal p Sistemleri / Slab Formwork Systems
76
Ürün Kodu Item No
A rl k kg Weight kg
Ürün Aç klamasDescription
4014000000100 0.03KOP‹LYADetent Pin
ALT AYAR ELEMANILower adjustment component
Mil ø 48 mm borudan, kare di li vidal ve sfero döküm somunludur.Taban plakas 150x150x5mm. sacdan kabartmal olarak imal edil-mektedir.
Made from dia 48 mm tube, squ-are shape threaded and with no-dular casted nut. Base plates are made in embossed style, out of 150x150x5 mm sheet-iron.
L= 80cm
L= 100cm
L= 120cm
ø 48x5 mm
ø 48x5 mm
ø 48x5 mm
5.50
7.00
8.50
2027048501080
2027048501100
2027048501120
2014110000000 0.20KR KO ASKISIJack Hanger
Alt ve üst ayar elemanlar n n çerçeveye ba lan-t s nda kullan l r.
Used for connecting upper and lower adjustable jacks to the frame.
4013000016120 P‹MPin
16x120 mm
0.19
Dö eme Kal p Sistemleri / Slab Formwork Systems
77
Ürün Kodu Item No
A rl k kg Weight kg
Ürün Aç klamasDescription
5.10
11.50
DÖRT YOLLU BA LIK ASFour-Way Heading AS
Ba l k 165x250x8 mm. sac plakadan imaldir.Kulaklar 40x40x4 mm. denboru 40’lik borudan imaldir.
Heading is made from 165x250x8 mm sheet-iron plate. Ears are made from 40x40x4 mm sheet-iron. Tube has a diameter of 40 mm.
MASA GÜVENL K KONSOLUTable Safety Console
2027040255020
2014000000004
AYARLI DÖRT YOLLU BA LIKAdjustable 4-way heading
Ba l k 165x250x8 mm. sac plakadan, kulaklar 40x40x4mm. sac dan imaldir.Mil ø 35 mm çap nda, dolu milden, kare di li vidal ve sfero döküm somunludur. Yükseklik ayarlamalar nda, beton alt kal p dikmelerinde kullan l r.
Heading is made from 165x250x8 mm sheet-iron plate. Ears are made from 40x40x4 mm sheet-iron. Adjustable jack is in a diameter of 35 mm, solid webbed, square shape threaded and with a no-dular casted nut. Used for height adjust-ments with under mold props.
H=80 cm
H=100 cm
H=120 cm
8.73
10.78
12.83
2027035005080
2027035005100
2027035005120
Dö eme Kal p Sistemleri / Slab Formwork Systems
78
Ürün Kodu Item No
A rl k kg Weight kg
Ürün Aç klamasDescription
120.002014000000001 MASA YÜRÜTME ARABASITable Formwork Trolley
Masa Kal p Sisteminde kal b ta mak için kullan l r.
Table Formwork equipment to move formwork.
2.80
1.70
2010000202000
2010000203000
H20 - 4 YOLLU BA LIK BA LANTI PLAKASI H20 - 4 Way Heading Connection Plate
Masa Kal p Sisteminde ana ta y c mahyalar ba lamada kullan l r.
Table Formwork equipment for fastening main wooden beams.
H20 - U BA LIK BA LANTI PLAKASI H20 - U Heading Connection Plate
Masa Kal p Sisteminde ana ta y c mahyalar ba lamada kullan l r.
Table Formwork equipment for fastening main wooden beams.
4010000200125
4010000200190
4010000200245
4010000200265
4010000200290
4010000200300
4010000200330
4010000200360
4010000200390
4010000200450
4010000200490
6.25
8.87
11.44
12.80
13.54
15.00
15.41
16.81
18.21
21.01
22.88
H20 AH AP K‹R‹Timber Beam H20
Max Kesme Kuvveti 11 kNMax E ilme Momenti 5 kNm
Max Shearing force 11 kNMax Bending Moment 5kN
L
125 cm
190 cm
245 cm
265 cm
290 cm
300 cm
330 cm
360 cm
390 cm
450 cm
490 cm
Dö eme Kal p Sistemleri / Slab Formwork Systems
79
Ürün Kodu Item No
A rl k kg Weight kg
Ürün Aç klamasDescription
605004005050 0.01PLYWOOD V‹DASIPlywood Screw
M5x50
605004008080 0.01AH AP V‹DASITimber Screw
M8x80
2014000000002
4014000000200
410.00
0.10
MASA TA IMA ÇATALITable Formwork Lifting Fork
Masa Kal p Sisteminde kal b vinçle ta mak için kullan l r.
Table Formwork equipment to move formwork by crane.
H20-H20 BA LAMA KÖ EBENTH20-H20 Connection Component
2010000203080
2010000203100
2010000203120
7.00
8.70
10.50
AYARLI U BA LIKAdjustable U-heading
Ba l k 5 mm. sac plakadan imaldir.Mil ø 35 mm çap›nda, dolu milden, kare di li vidal ve sfero döküm somunludur. Yükseklik ayarlamala-r nda, beton alt kal p dikmelerinde kullan l r.
Heading is made from 5mm thick sheet iron. Adjust-able jack is in a diameter of 35 mm, solid webbet, square shape threaded and with a nodular casted nut. Used for height adjustments with undermold props.
H=80 cm
H=100 cm
H=120 cm