1
HHEEAALLIINNGG
FFRREEQQUUEENNCCYY AA lliittttllee mmaannuuaall ffoorr tthhee ssooffttwwaarree ““HHeeaalliinngg FFrreeqquueennccyy””
((SSttaanndd 2277.. DDeecceemmbbeerr 22001166 –– WWee rreesseerrvvee uuss tthhee rriigghhtt ttoo mmaakkee cchhaannggeess))
In this paper, we will explain all the steps involved in the use of the
"Healing Frequency" and explain it by means of pictures. This handout
should be a little help by your first steps with the software.
Before you can start with this
manual, you should download
the free software on:
www.healingfrequency.com/en/
There you can download the
setup. As soon as the download
is finished you can start the
file „CcCreatorSetup.exe“ and
the installation begins (see
image 1 and 2).
Image 1 Image 2
2
As you can see on the images above (image 1 and 2), a normal installation
starts now. As soon as it is finished and everything is working properly,
you can start the Chipcard Creator. Please refer to page 14 - 16 of this
handout to find out which Zapper models are suitable for the “Healing
Frequency” software.
Now you can see the start screen of the Chipcard Creator (image 3). As
long as you only work with the free software and not the extensive pro
version, the following options are available to you:
Frequencies according to Dr. Clark and Dr. Rife
Frequencies according to natural health professional Alan E. Baklayan
Standard – Programs (Chipcard)
TCM – Programs (Acupuncture without needles) follows shortly and will be concluded for free with the next software update
Search for different indications
Writing on standard chipcards (with the free software version it is only possible to write on the chipcard for one time!)
Now you can search every indication, diagnosis, afflictions or keywords
you want (image 4, for example “asthma”, image 5, for example “teeth”).
Furthermore you can choose in which library you want to search (image 3,
marked red). If you only want to search in Clark – frequencies for
example make sure your check mark is placed right. These examples should
show you how to work with the software. Additionally to the different
indications there are two more symbols (image 4, marked red): With these
symbols you can either save the frequency on a standard or master
Image 3
3
chipcard, or you can read more informations about the chosen indication
(image 6).
Image 5
Image 4
4
Image 6
To use the chosen frequency with your device – for example a Diamond
Shield Zapper – you have to save them on a chipcard (regardless whether
you have chosen a chipcard you can write on one time or a master chipcard
you can write on multiple times for the pro version). For this you have
to insert an empty chipcard in your chipcard writer and put it in free
USB slot of your computer. You can read more details about this in the
following text, follow these easy steps:
To save your chosen programs and
frequencies on a chipcard you have to
use an USB – chipcard writer.
(image „Chipcard writer“)
Please make sure to insert your chipcard the right way, so that no
malfunctions can appear (image 7 and 8):
Image „Chipcard writer“
Image 7 Image 8
5
As soon as you have inserted the chipcard the right way into your
chipcard writer, you can put the device in a USB – slot of your computer.
System requirements for the software are written below:
o Computer with Windows 7 / Windows 8.1 / Windows 10
o USB slot / internet connection
If these steps are functioning without problems the screen should change
like you can see in the following picture (image 9):
Image 9
On the right side you can see now the chipcards instead of „Please insert
a chipcard“ (image 9). Right above that you can see how many frequencies
and / or programs can be written on the chipcard (see image 9 and 10 for
a free chipcard or image 11 for a chipcard with “asthma” on it for
example).
Image 10
6
Image 11
At the top of the right corner you can see
four more symbols (see image here,from left
to right) (image 9 and 11):
„New folder (edit)“ (only useable with pro version and valid license key,
otherwise it’s grey and not available for users of the free version)
„New frequency (edit)“ (only useable with pro version and valid license key,
otherwise it’s grey and not available for users of the free version)
„Save on chipcards“ (Attention, with standard chipcards the chosen frequencies
CAN NOT be changed anymore afterwards, since the standard chipcards can only
be written on one time!) With a licensed pro version and master chipcards (that
can be written on multiple times), you don’t have to worry because it can easily be changed and corrected several
times.
„Delete from chipcard“ (only useable with pro version and valid license key,
otherwise it’s grey and not available for users of the free version)
7
Use Chipcards with the Diamond Shield OR Biowave Zapper:
Before you create a chipcard it is important for you to know, which
device the chipcard will be used for – because if you have chosen one
time you can not revoke this decision.
Diamond Shield Zapper:
If the device your chipcard will be used with is part of the Diamond
Shield series, you don’t have to take further actions – you simple can
insert your chipcard in your chipcard writer and save your chosen
programs.
Biowave Zapper:
If the device your chipcard will be used with is a Biowave Zapper, you
have to format the chipcard before you save your chosen programs.
ATTENTION: As soon as the chipcard is formatted you can not revoke
this step! The chipcard can’t be used with a Diamond Shield Zapper
after formatting.
Up to this point this little manual explained how to use the free version
of the Chipcard Creator. This free version can be upgraded to a chargable
pro version. The following extensions can be used with the upgraded
version:
Frequencies according to Dr. Clark and Dr. Rife
Frequencies according to natural health professional Alan E. Baklayan
Standard – Programs (Chipcard)
TCM – Programs (Acupuncture without needles) follows shortly and will be concluded for free with the next software update
Search for different indications
Writing on standard chipcards (with the free software version it is only possible to write on the chipcard for one time Pro Version:
Writing on master chipcards (writable for multiple times)
Editing of existing programs
Changing the order of different programs
Creating new individual programs
If you want to upgrade your free standard version to the chargable pro
version (with a larger range of services), the following steps must first
be taken:
8
HHeeaalliinngg FFrreeqquueennccyy Manual „How to upgrade to your pro version“
As soon as you have downloaded the software (see image 1) from the website
www.healingfrequency.com/en/ and installed and decided to upgrade to a pro version (so you can use the
extended options and possibilities like using Master Chipcards, edit existing programs or change the order
of different programs, as well as creating your own programs) please proceed as follows:
Image 1
9
- Open your installed and free standard software version of the Chipcard Creator (image 2)
- Now click on the red marked little gearwheel besides the language flag (see image 2). A new window
will be opened (see image 3):
Image 2
Image 3
10
- You can see your individual code in the field „Current installation ID“ (image 3, marked in red)
- If you’d like to upgrade your free standard version to a chargeable version please send this ID including
your name and surname to following email address: [email protected]
- After the successful receipt of payment you will get a confirmation email, in which you will be
informed that you are now free to use the licensed and upgraded pro version of the software. Done!
The next time you open your Chipcard Creator you can use all functions and possibilities of the Healing
Frequency pro version software
- You can confirm your licensed usage with opening the gearwheel sign again (image 3, red marked) –
now you can see your „Licensed Installation ID“ key. Congratulations!
AAtttteennttiioonn!!
Please consider, that this activation is bound to ONE computer! The installation key (and therefore the license key) is bound to one device (because the key gets automatically created for it) and can – if you used it for your home computer for example – not be used with another device of your choice (like your laptop), because the installation and license key is generated with your installed operating system and the hardware of your device. If another operation system has to be installed on the computer you use for the licensed pro version of the software – the now outdated key has to be deactivated and after the installation of your new operating system, activated again with a new license key. For this you have to proceed similar to the manual above: Send an email to [email protected] with the outdated key, that has to be deactivated, your current installation key and you name and surname. A simple deactivation and new activation on another device (for example if you buy a new computer) is free, as long as the license key will be used for only one device.
System requirements for the software:
Computer with Windows 7 / Windows 8.1 / Windows 10 USB – port / internet connection
11
With the now activated pro version you can use way more options than with
the free version. For example you can now create master chipcards that
are multiple writable, create new folders und edit the new folders to
your liking. Furthermore different frequencies can be edited by the user
(for those examples see images 12 – 15).
Image 12
Image 13
12
Image 14
Image 15
13
Additionally important to know: you have the possibility to write
frequencies on your chipcard for your Biowave Zapper. For this step you
have to choose „Biowave“ instead of „Diamond Shield“ on the home screen
of the Chipcard Creator (image 16, marked red) (for more informations
which zappers are compatible with the “Healing Frequency” software see at
page 14 – 16):
As soon as you have chosen the Zapper brand „Biowave“ and inserted an
empty chipcard (it doesn’t matter if standard or master chipcard) into
the chipcard writer and the writer in the USB slot of your computer, the
software will ask, if the inserted chipcard should be formatted for the
Biowave (image 17).
Attention: If the chipcard has been formatted once, you CAN NOT use it
anymore for the Diamond Shield Zapper!!! Naturally, only a fraction of
the frequencies can be used on the Biowave. The full range of features is
only available with the Diamond Shield models.
Image 16
Image 17
14
WWhhiicchh ZZaappppeerrss aarree ccoommppaattiibbllee wwiitthh tthhee ““HHeeaalliinngg FFrreeqquueennccyy”” ssooffttwwaarree??
The software Healing Frequency is especially
compatible with all versions of the Diamond
Shield Zapper series, as well as Biowave
generations.
But since the Diamond Shield series is rather
new and highly developed only with this device
will every function work – therefore it is
highly recommendable to use this brand.
Compatible Zappers are:
Diamond Shield Zapper IE
Diamond Shield Crystal Zapper
Diamond Shield Biowave 42 Zapper
Diamond Shield Professional Zapper
Biowave Golden Harmony
Biowave 77
Biowave 21 LCD / Golden Stream
ZZaappppeerrss ffoorr tthhee „„HHeeaalliinngg FFrreeqquueennccyy““ ssooffttwwaarree
Different zapper brands, that are compatible with the software “Healing
Frequency”:
Two zapper brands are compatible with the new software: the Diamond Shield
series and the Biowave series. Because of its new technology and greater
service options the Diamond Shield Zapper is very recommendable, since the
Biowave is not functioning with a lot of programs and options – but this will
be steadily worked on.
Diamond Shield Zapper IE
One can use the zapper with the well being frequency
programs developed by Dr. Clark, Dr. Rife, Dr. Beck and HP
Baklayan. It can be used for regulating the Zappicator and
for Plate-Zapping. Many additional Chipcards are available.
Following programs are included in the zapper:
programs for well being
Diamond Shield
Discharge
System of harmonic oscillations by Baklayan
15
Diamond Shield Crystal Zapper
The Diamond Shield Crystal Zapper is the new and
more developed version of the Diamond Shield IE and
contains new programs and functions.
While the Diamond Shield Zapper, as the name
indicates, is a basic treatment to protect the body
from the outside against all influences as a shield
by flushing the meridians, creating a better flow,
and through the energy network of the body
readjusts healing processes, the Crystal Zapper
assigns around each acupuncture point of each
meridian all structures and the ones with which
this meridian is connected. It detoxifies this area
further and deeper.
So this is the first system in the world that
actually cleanses the body deeper yet gently on an
energetic basis.
Diamond Shield Professional Zapper
The Diamond Shield Professional Zapper is really similar to
the Diamond Shield IE. But there is one great difference:
especially for therapists, natural health professionals and
zapper professionals there is a possibility to create their
own individual programs and save them on a chipcard which can
be given to patient or use for own purposes.
Chipcards can be programmed as often as you like. These
individually created Chipcards can be used with the Diamond
Shield IE.
Diamond Shield Biowave 42 Zapper
This Zapper version is ideal for beginners and zapper
newcomers, because of its fair price and easy handling.
The simple Clark Zapper by Dr. Hulda Clark has been
successfully continued with the Biowave 42, improved and
now contains all Clark basic programs that further the
well being. You can upgrade your Biowave 42 anytime to a
Diamond Shield IE or a Diamond Shield Crystal Zapper.
Cheap but nevertheless with high quality and performance –
the Biowave 42 is perfect for testing and to get to know
the Zapper.
16
Biowave 21 LCD | Golden Stream
The standard Biowave 21 LCD is a frequency device with 10
basic programs, which can be upgraded to a Biowave Golden
Stream. The Golden Stream is the predecessor to the Biowave
Golden Harmony. It contains options like constant zapp,
programs according to Clark and TENS programs.
It is more extensive than the simple Clark Zapper and
contains frequencies according to Clark, Beck and Rife.
Biowave 77
The Biowave 77 Zapper is perfect for everyone who wants to
create their own frequency programs and furthermore want to us
all frequency chips for Biowave.
Frequency programs can be created and saved on a chip.
Additionally it contains constant zapp and Clark, Rife and Beck
programs.
Biowave Golden Harmony
The Biowave Golden Harmony is the development of the Biowave Golden
Stream with tesla inductors and 10 new frequency programs.
Of course, you can also use your software in German, if you prefer. Simply click
the flag at the top of your software (image 18, marked in red)
and select the desired language.
Image 18