©Fisher Controls International, Inc. 1997; All Rights Reserved
Product Flier PF51.6:8510BMarch 1997
High-Performance ButterflyValves
edisc, ENVIRO-SEAL, FIELDVUE, Fire-Tested, FloVue, Fisher, Fisher-Rosemount,Managing The Process Better, NOVEX, Phoenix III, POSI-SEAL, and ValveLinkaremarks owned by Fisher Controls International, Inc. or Fisher-Rosemount Systems,Inc. HART is mark owned by the HART Communications Foundation, Inc. All othermarks are the property of their respective owners.These products may be covered by one or more of the following patents (5,129,625; 5,131,666; 5,056,757; 5,230,498; and 5,299,812) or under pending patent applications.
l High-performance butterfly valves featuring tight shutoff andexcellent throttling performancel DIN and ANSI designsl DN 50 to DN 300 DIN and 2- to 36-inch ANSI sizesl Choice of seal materials--soft, metal, or fire-tested ™ metal-and-soft seall Temperatures to 538 °°°°°Cl Pressures to DIN PN100 and ANSI Class 600
l ENVIRO-SEAL® packing systems to help ensure compliance withenvironmental emissions requirements
l FIELDVUE® digital valve controllers offer digital control andremote diagnostics. The proven line of Fisher Controlspositioners, controllers, transmitters, and switches also isavailable.
D102454X412
W6858
2
Product Flier PF51.6:8510BHigh-Performance Valves for Excellent Flow Control and Shutoff
Accurate Flow Control... Thevalves have a splined-and-clampedconnections to positioning actuatorsfor accurate throttling or on-offcontrol. The valves are capable ofthrottling through 90 degrees ofdisc rotation with an approximatelylinear or modified equal percentage(Type 8532) characteristic.The splined-and-clamped valve-actuator connection reduces lostmotion and deadband.The valves and actuators can bereversed from push-down-to-closeto push-down-to-open in the fieldwithout additional parts.Excellent Shutoff... The soft and
metal seals are pressure assistedfor excellent shutoff.Type 8510B edisc ® Valves ... forDIN or ANSI applications. Thevalves feature DIN dimensionsand compatibility. The valve shaftis a through, balanced shaft.Also, the eccentric disc pathreduces seating torquerequirements and seat wear.Type 8560 Valves... For ANSIapplications. The Type 8560 valveis available with a Fire-Tested™seal that can meet fire-safestandards.Type 8532 Valves... This valve
shares many features with the Type8560 valve and is available in largersizes.Type 8510 edisc ® Valves... TheType 8510 valve is an ANSI designversion of the Type 8510B valve in30- and 36-inch sizes. The 36-inchsize is compatible with DIN flanges.
W3542-2
Typical Type 8510B and 8510 Construction
A6936
Pressure-Assisted Seals (VerticalArrows Indicate Disc Position with noPressure)
DISC POSITIONWITH NOPRESSURE
DIREC-TION OFPRES-SURE
DIREC-TION OFPRES-SURE
3
Product Flier PF51.6:8510BHigh-Performance Valves (Continued)
Protection Against Process FluidEmissions... Optional ENVIRO-SEAL® packing systems provide asuperior shaft seal to prevent theloss of valuable or hazardousprocess fluids. This live-loadedsystem provides longer packing lifeand reliability.
Materials for SourService... Fisher Controls offersmaterials and manufacturingprocedures for compliance withNACE (National Association ofCorrosion Engineers) standardMR0175.
POSI-SEAL™ Types A31A andA41...For less stringent throttlingapplications and for on-offapplications requiring the sameexcellent shutoff capabilities as theType 8560 and 8532. The TypeA31A and A41 valves connect to arack-and-pinion piston actuator,manual handwheel actuator, orhandlever.
H.D. Baumann 21000 Series ... Forapplications that require anelastomer-lined valve in 2- through6-inch sizes.
Other Butterfly Valves
ENVIRO-SEAL® Packing System (Single PTFE V-Ring)
W5806-1
Type 8560 Valve with ActuatorW6213/IL
4
Product Flier PF51.6:8510B
Actuators
Type 1061 ActuatorType 1052 Actuator
Type 1051 and 1052Pneumatic DiaphgragmActuators... Rugged, heavy-duty spring-return actuators.These actuators are availablewith a variety of instrumentaccessories, handwheels,adjustable travel stops, and amaintenance lock-out device.
Type 1061 Pneumatic PistonActuator... Heavy-duty piston
The High-Performance Valve Family (Continued)
The Actuators are Available in anyof Four Styles and Positions (Abovethe Pipeline as Shown Here,Below, or Parallel with the Pipeline)
actuator available with a variety ofinstrument accessories, handwheelsand piston bypass valves, and amaintenance lockout device.
Type 1077 Manual HandwheelActuator... Available for manual-onlyoperation.
Actuator Accessories
FIELDVUE® Digital ValveController... Available mounted on
Type 1051 and 1052 actuators.
Positioners andTransducers... Pneumatic positionersand electro-pneumatic positioners andtransducers can be provided withthese actuators.
Position Transmitters, SolenoidValves, Volume Boosters, and LimitSwitches... Also available.
RIGHT-HANDMOUNTING
LEFT-HANDMOUNTING
STYLE D
STYLE C
STYLE B
STYLE A
A1579-4/IL
Actuators are Field-Reversible from Push-Down-to Close (PDTC) to Push-Down-toOpen (PDTO)
J407T13
MOUNT-ING
ACTION STYLE
Righthand
PDTCPDTO
BA
Lefthand
PDTCPDTO
CD
W6475-1 W5978
5
Product Flier PF51.6:8510B
Only a few of the more commonly selected product materials, sizes,options, and accessories are covered in this flier.
Contact your nearest sales office or sales representative (refer to the backcover) for assistance in selecting and sizing these products. More detailedspecifications are available on request.
Selecting Valve ComponentsValve Type Selection .......................................................................... 6Valve Body Information ....................................................................... 6Primary Valve Component Materials .................................................. 7Temperature Capabilities of Selected Combinations .......................... 8Inlet Pressure Ratings for M35-1 (Monel) Valves ............................... 8
Selecting an ActuatorType 1051 and 1052 Pneumatic Diaphragm Actuators ...................... 9Type 1061 Pneumatic Piston Actuator .............................................. 10
Selecting AccessoriesFIELDVUE® Digital Valve Controller ................................................. 113610J Series Valve Positioners ........................................................ 12Other Accessories ............................................................................ 13
Reference InformationFlow Coefficients .............................................................................. 14Conversions for Other Sizing Equations ........................................... 14Typical Actuator-Valve Size Combinations ....................................... 15Actuator Size Selection (Shutoff Pressure Drop) .............................. 16Dimensions ....................................................................................... 17Typical Weights ................................................................................ 18
Ordering Information ........................................................................ 19Sales Offices and Sales Representatives ........................................ 20
Selecting High-Performance Products
6
Product Flier PF51.6:8510B
Valve Body Information
J407T02
Valve Type Selection
J407T01
APPLICATIONSHUTOFF
CLASSIFICATIONPER IEC 534-4AND FCI/ANSI
70-2-1991
SIZES,DN ORINCHES
RATINGS, DIN PNOR ANSICLASS
VALVETYPE
NUMBERNOTES
Service Valve BodyTempera-
tureSeal
DIN to DN 300 &to PN100 rating
Wafer-style steelor stainless steel
body
to 232C PTFE
See notes forstandard;
Class VI isoptional
DN 50DN 80
DN 100DN 150DN 200DN 250DN 300
10, 25, 40, 63, & 10010, 25, 40, 63, & 10010, 25, 40, 63, & 10010, 25, 40, 63, & 10010, 25, 40, 63, & 10010 & 16 or 25 & 4010 & 16 or 25 & 40
8510B
Standard shutoff forType 8510B and 8510with PTFE seal is2mL/minute of air perinch of valve size at apressure drop of 3.4bar.
Refer to pages 7 and8 for more detailedinformation aboutmaterials andtemperatures.The 30- and 36-inchsizes are compatiblewith DIN PN10 andPN 16 flanges.
to 538°CS31600 (316
stainlesssteel)
1/10 of Class IV
ANSI to 12-inch &to Class 600
Wafer-style steel,stainless steel,
CN7M (alloy 20)or M35-1 (Monel)
body
to 232°C PTFE
See notes forstandard;
Class VI isoptional
23468
1012
150/300/600150/300/600150/300/600150/300/600150/300/600150 or 300150 or 300
to 538°C S31600 1/10 of Class IV
ANSI to 24-inch &to Class 300
Wafer-style orsingle-flange
steel or stainlesssteel body
to 204°C Soft VI 3468
10121416182024
150 or 300
8560 (to12-inch)
or8532
(greaterthan 12-
inch)
to 538°C NOVEX seal1/10 of Class IV isstandard: Class V
is optional
to 232°C
Phoenix IIImetal/soft
VI
Phoenix IIIFire-Tested
sealVI
ANSI 30- & 36-inch & Class 150
rating
Wafer-style steelor stainless steel
body
to 232°C PTFESee notes for
standard; Class Vis optional
3036
150 (per MSS SP-44)
8510
to 538°C S31600 1/10 of IV
Sizes Type Valve Body MaterialsFace-to-FaceDimensions
Mating Flange Compatiblity
DIN or ANSI
DN 50through DN
300 & 2through
12inches
8510B
DIN 1.0619 steel (17245) DIN 1.4581stainless steel, WCC steel, CF3M (316Lstainless steel), M35-1 (Monel), & CN7M
(alloy 20)
DIN: 3202 Part 3/K2ANSI: API 609 for all
Class 150 valves & for 3-through 6-inch Class 300
Raised-face flanges; all sizes compatiblewith with schedule 80 and lighter welding-
neck and slip-on flanges
ANSI
3 through24 inches
8560 &8532
Steel, CF8M (316 stainless steel), & CG8M(317 stainless steel)
API 609 & MSS SP68Raised-face flanges; all Type 8560 sizescompatible with schedule 80 and lighter
welding-neck and slip-on flanges
30 & 36inches
8510WCB steel, CF8M (316 stainless steel), &
CN7M (alloy 20)30-inch: 191 mm36-inch: 222 mm
Class 150 raised-face flanges (MSSSP44); compatible with schedule 40 andlighter welding-neck and slip-on flanges
7
Product Flier PF51.6:8510BPrimary Valve Component Materials
J407T03
Phoenix III Seal
A6937
Single-Flange Valve
W6361RESILIENT INSERT
BACKUP O-RINGDISC
SEAL RING
GASKET
RETAININGRING VALVE BODY
PartDIN or ANSI (Type 8510B: DN 50
through DN 300)ANSI (Type 8560: 3- through
12 inch)ANSI (Type 8532: 14-
through 24-inch)ANSI (Type 8510: 30 &
36-inch)Notes
Discn WCC steel, n CF3M (316Lstainless steel, n 35-1 (Monel) orn CN7M (alloy 20)
n CF3M or n CG8M (317stainless steel)
n Steel or n CF8M (316stainless steel)
n WCB steel, n CF3M(316 stainless steel), nM35-1 (Monel) or nCN7M (alloy 20)
• PEEK is poly-ether-etherketone• UHMWPE isultra high-molecular weightpolyethylene• Contact yoursales office orsalesrepresentativefor moreinformation onENVIRO-SEALpacking
Sealn PTFE composition (filled PTFEfor CF3M valves) or n S31600(316 stainless steel)
n PTFE or n UHMWPE withbackup ring of:• nitrile • neoprene, •EPR, •fluoroelastomer, or • PTFE
n NOVEX seal S31600(standard for Class 150) orNitronic 60 (standard for Class300)
n S31600/PTFE Phoenix III orPhoenix III fire-tested seal withbackup ring of:• nitrile • neoprene, • EPR, or• PTFE
n PTFE, n UHMWPE,n NOVEX seal S31600(standard for Class 150) orNitronic 60 (standard for Class300), n Phoenix IIImetal/fluoreoelastomer, orn Phoenix IIImetal/fluoreoelastomer fire-tested seal
n PTFE composition orn S31600
Bear-ings
n PTFE/Composition with S31603jacket, n S44004 (440C stainlesssteel) n alloy 6 with or withoutsilver plating, n Filled PTFE withN04400 (Monel) or N08020 (alloy20) jacket
n PEEK/PTFE lined or n metal(NOVEX or Phoenix II sealsonly)
n PEEK, n S31600, n alloy6, or n bronze
n PTFE/Composition withS31603 jacket, n S44004,n alloy 6B with or withoutsilver plating, or n FilledPTFE with N04400, orN08020 jacket
Valveshaft
n S17400 (17-4PH stainless steel),n S20910 (Nitronic 50 stainlesssteel), n N05500 (Monel), nN10276 (alloy 276), or n N08020(alloy 20)
n S17400 or n S20910 n S17400 or n S20910n S17400, n S20910), nN05500, or n N08020
Packing
n PTFE V-ring, n PTFE-composition (both with oneconductive ring), n graphite ribbonrings, or n ENVIRO-SEALpacking
n PTFE V-ring, n graphite, orn ENVIRO-SEAL packing
n PTFE V-ring, n graphite, orn ENVIRO-SEAL packing
n PTFE V-ring, n PTFE-composition (both withone conductive ring),n graphite ribbon rings, orn ENVIRO-SEALpacking (30-Iinch sizeonly)
8
Product Flier PF51.6:8510B
J407T04
Temperature Capabilities of Selected Combinations
Only selected combinations are shown here. Consult the previous table and your salesoffice or sales representative for other combinations. For simplicity, only general materialnames are given here; refer to the previous tables for more complete descriptions. ForType 8510 and 8510B valves with PTFE bearings, limit maximum temperature to 207°Cwith water or steam.
Inlet Pressure Ratings for M35-1 (Monel) Valve Bodies,Bar
J407T15
Temperature, °C 150 300 600 Note
-29 to 3893
149204232
15.813.813.112.712.3
41.336.534.133.133.0
82.772.768.265.865.7
M35-1 is not listed in ASME/ANSIB16.34. The designations 150,300, and 600 indicate relativepressure-retaining capabilities andare not ANSI pressure-temperaturerating classes.
ValveBody
Disc Shaft Seal Bearings PackingTemperature,
°CNote
TYPE 8510B--DN 50 to DN 300 or 3- to 12 INCH & 8510-- 30- & 36-INCH
For DIN valvebodiess, theminimumtemperature isnormally limited to -10°C. Contact yoursales office or salesrepresentative iflower temperaturesare required and forpressure andtemperature limitswith ENVIRO-SEALpacking..
Steel Steel S17400PTFE
S31600PTFE-composition
S44004PTFE
Graphite-29 to 232-29 to 427
Stainlesssteel
Stainless steel S17400 or N20910 PTFE PTFE-composition PTFE -40 to 232Chrome-platedstainless steel
S17400N20910
S31600S31600
Alloy 6Alloy 6
GraphiteGraphite
-40 to 232-46 to 538
TYPE 8510B--DN 50 to DN 300 or 3- to 12 INCH
M35-1 M35-1 N05500 PTFE PTFE-compositionPTFE
Graphite-40 to 232-46 to 232
CN7M CN7M N08020 PTFE PTFE-compositionPTFE
Graphite-40 to 149-46 to 149
TYPE 8560--3- to 12-INCH
Steel Stainless steel S17400 or N20910PTFE
NOVEX sealPhoenix III seal
PEEK/PTFEMetal
PEEK/PTFE or metal
PTFEGraphite
PTFE
-29 to 232-29 to 427-29 to 232
Stainlesssteel
Stainless steel
S17400PTFE
NOVEX sealPhoenix III seal
PEEK/PTFEMetal
PEEK/PTFE
PTFEGraphite
PTFE
-46 to 232-29 to 427 -40 to 232
N20910PTFE
NOVEX sealPhoenix III seal
PEEK/PTFEMetal
PEEK/PTFE
PTFEGraphite
PTFE
-46 to 232-29 to 538-40 to 232
TYPE 8532--14- to 24-NCH
SteelSteel or stainless
steelS17400 or N20910
PTFE with PTFE backup ringNOVEX seal
Phoenix III with EPR backup ring
PEEK/PTFES31600
PEEK/PTFE
PTFEGraphite
PTFE
-29 to 204-29 to 538-29 to 204
Stainlesssteel
Stainless steelS17400 or N20910
N20910S17400 or N20910
PTFE with PTFE backup ringNOVEX seal
Phoenix III with EPR backup ring
PEEK/PTFES31600
PEEK/PTFE
PTFEGraphite
PTFE
-29 to 232-29 to 538-29 to 232
9
Product Flier PF51.6:8510BType 1051 and 1052 Actuators
H419T40
Type 1051 and 1052 pneumaticdiaphragm rotary actuators arespring-return actuators that providereliable operation for the valves inthis flier.The Type 1051 actuator is suitablefor on-off operation or for throttlingoperation when equipped with avalve controller or positioner. TheType 1052 actuator is suitable foron-off or throttling with or without acontroller or positioner.These actuators feature single-jointlinkage with splined-and-clampedlevers for minimum lost motion andhigh control accuracy.The actuator-valve linkage iscompletely enclosed for safety, yetthe packing adjustment isaccessible without removing anyparts.
Specifications... Refer to the tablebelow and the actuator selectiontables.
Options... n Top-mountedhandwheel, n Type 1078declutchable handwheel actuator,n Adjustable up- and down-travelstops, n Actuator lockingmechanism that keeps the actuatorin a locked position duringmaintenance, and n Pipe-awayvent for remote venting of theactuator housing.
Accessories... n Pneumatic andelectro-pneumatic valve postioners,n FIELDVUE® digital valvecontroller, and n Limit andproximity switches.
Size 33 Actuator
Typical Type 1052 Actuator
W3813-1
W4742-1
ACTUATOR SIZENOMINAL OPERATING PRESSURE
RANGES
MAXIMUMCASING
PRESSURE, BAR
MAXIMUM VALVEBREAKOUT
TORQUE, N•mAMBIENT
TEMPERATURES, °CMATERIALS
Type1051
Type1052
Bar PsigType1051
Type1052
Type1051
Type1052
- - - 20n 0 to 1.2, n 0 to
2.3, and n 0 to 2.8n 0 to 11, n 0 to 33,
and n 0 to 40- - - 4.1 - - - 42
Nitrile: -40 to 82Silicone: -50 to 149
Diaphragm: Nitrile(standard) or silicone
elastomersO-rings (for optionalhandwheel): Nitrile or
EPDMHousing: Cast iron(standard) or steelOther Major Metal
Parts: Aluminum, steel,or cast iron
33 33 n 0 to 1.2, n 0 to2.3, n 0 to 2.8, and n
0 to 3.8
n 0 to 18, n 0 to 33,n 0 to 40, and n 0
to 55
4.5 85 132
40 40 5.2 322 730
60 60n 0 to 1.2, n 0 to
2.3, and n 0 to 2.8n 0 to 11, n 0 to 33,
and n 0 to 403.4 626 6460
- - - 70n 0 to 2.3, n 0 to
2.8, and n 0 to 3.8n 0 to 33, n 0 to 40,
and n 0 to 55- - - 4.5 - - - 1370
10
Product Flier PF51.6:8510BType 1061 Actuators
Type 1061 pneumatic rotaryactuators are double-acting pistonactuators that provide reliableoperation for the valves in this flier.The Type 1061 can be used with atwo-position control signal for on-off operation or with a valvecontroller or positioner for throttlingoperation.These actuators feature single-jointlinkage with splined-and-clampedlevers for minimum lost motion andhigh control accuracy.The actuator-valve linkage iscompletely enclosed for safety, yetthe packing adjustment isaccessible without removing any
parts.
Specifications... Refer to the tablebelow and the actuator selectiontables.
Options... n Type 1078declutchable handwheel actuatorwith cylinder bypass valve, nAdjustable up- and down-travelstops, n Actuator lockingmechanism that keeps the actuatorin a locked position duringmaintenance, and n Pipe-awayvent for remote venting of theactuator housing.
Accessories... n Pneumatic andelectro-pneumatic valve postionersand n Limit and proximity switches.
H419T41
W3827-1
ACTUATORSIZE
CYLINDER OPERATING PRESSURE, BAR MAXIMUM VALVEBREAKOUT TORQUE,
N•m
AMBIENTTEMPERATURES, °C
MATERIALSMinimum
RecommendedMaximum Allowable
30
Without positioner: 1.4With positioner: 0.35
bar above actuatorrequirement
6.9 282
-34 to 82(to -50 with optional
materials)
Cylinder and flange: AluminumPiston: Aluminum or nylon-
coated aluminumO-rings: Nitrile
Mounting yoke bushing: PTFEand steel
Sliding seal: BrassOther parts: Iron, aluminum,
and stainless steel
40 10.3 847
60 6.9 1130
68 5.9 1540
80 10.3 5080
100 10.3 6290
11
Product Flier PF51.6:8510BType DVC5020 Digital Valve Controller
W6161
FIELDVUE digital valve controllersare communicating,microprocessor-based controllersthat convert a current signal to apressure signal to operate theactuator. Through the HART®
communications protocol, thecontroller gives easy access toactuator-valve information that iscritical to process operation.
The Type DVC5020 controller isavailable to mount on Type 1051and 1052 actuators.
ValveLink™ Software... ValveLinksoftware allows easy access to theinformation available from theFloVue™ system. The softwareprovides diagnostic informationsuch as dynamic error band andstep response on easy-to-interpretscreens .
Access to diagnostics is through aModel 275 HART communicator ora personal computer usingWindows™ software.
Type DVC5020 Controller on aValve and Actuator with Model 275HART Communicator
FIELDVUE Valve Controller Physical Specifications
SUPPLY PRESSURE, BAROUTPUTSIGNAL
STEADY-STATEAIR
CONSUMPTION,Nm 3/h
TEMPERATURELIMITS
WEIGHT HOUSINGMinimum andRecommended
Maximum
As needed byactuator
6.5Up to 95%of supplypressure
Less than 0.3 at 1.4bar supply pressure
-40 to 80°C 2.7 kgIP 65 per IEC 529
classification
H419T45
H410T06
H419T49
FIELDVUE Controller Electrical SpecificationsELECTRICAL INPUT
DIGITALCOMMUNICATION
INPUT SIGNALAnalog Input
SignalVoltage
Minimum ControlCurrent
Minimum Currentwithout
MicroprocessorRestart
MaximumCurrent
PolarityProtection
n 4 to 20, n 4to 12 or n or 12
to 20 mA dc(user adjustable)
12 Vdc minimumand 30 Vdcmaximum
4.0 mA 3.5 mA 100 mA-30 Vdc minimumwithout damage
HART 1200 baudfrequency shift
keyed
FIELDVUE Digital Controller Certifications
INTRINSIC SAFETYINTRINSIC
SAFETY OR NON-INCENDIVE
FLAMEPROOF DIVISION 2EXPLOSION-
PROOF
LCIE CSA (1) or FM (1) SAA CENELEC SAA CSA FM CSA or FM
EEx ia IIC T5
Class I, Division1, Groups(1) A,
B, C, DT5 (T
amb 80°C)
Ex n IIC T5, T6Ex ia IIC T4, T5, T6
EEx d IIB + H2
T5 (Tamb
80°C)EEx d IIB + H
2
T6 (Tamb
80°C)
Class I Division 2,Groups A, B, C, DClass II, Division 2,
Groups E, F, G
Class I Division 2,Groups A, B, C, DClass II, Division2, Groups F, G
Class I Division 1,Groups B, C, D
Class II, Division 1,Groups E, F, G
1. Contact your nearest sales office or sales representative for the appropriate FM entity ratings and CSA parametric ratings for each group.
12
Product Flier PF51.6:8510B 3610J Series Valve Positioners
The 3610J Series pneumatic and3620J Series electro-pneumaticvalve positioners can be used withType 1051, 1052, or 1061actuators for accurate valvepositioning in throttling applications.The positioners provide accurate,fast response and can withstandthe vibrations in most plants.The positioners are easilyreversible for direct or reverse
action without additional parts.The 3610J positioners are singleacting for Type 1051 and 1052actuators, and the 3610JPpositioners are double acting forType 1061 actuators.
Options... n Supply pressuregauge, n Tire valves for clip-ongauges, and n Integrally mountedbypass valve for single-actingactuators
H419T42
H419T43
H419T44
3610J and 3620J Positioner Specifications
Type Input Signal Supply PressureOperative
TemperatureWEIGHT Connections
3610J and3610JP
n 0.2 to 1.0 or n 0.4 to 2.0 bar
n 3 to 15 or n 6 to 30 psig
0.3 bar above the actuatorrequirement up to 10.3 bar
maximum-40 to 80°C 2.5 kg
Pressure and VentConnections: 1/4-inch NPT
Type 3620J and JPConduit:1/2 NPT
3620J and3620JP
4 to 20 mA constant current with30 Vdc maximum compliance
voltage; equivalent circuit is 120ohms shunted by three 5.6 V zener
diodes
0.3 bar above the actuatorrequirement up to 10.3 bar
maximum-40 to 80°C 3.6 kg
3610J and 3620J Series Capacities and Housing
TypeSUPPLY
PRESSURE, BARSUPPLY AIR
DEMAND, Nm 3/hAir Consumption, Nm 3/h
Housing (Types 3620Jand 3620JP)
3610J and 3620J1.4 13 Type 3610J: 0.40 at 1.4 bar supply
Type 3620J: 0.49 at 1.4 bar supply
IP 54 per IEC 529classification
(weatherproof), NEMA 3;vent should be on the sideor bottom for weatherproof
applications
2.4 17
3610JP and 3620JP5.2 37 Type 3610JP: 0.64 at 6.9 bar supply
Type 3620JP: 0.93 at 6.9 bar supply6.9 46
Type 3622 Electro-Pneumatic Converter Certifications
INTRINSIC SAFETY ORNON-INCENDIVE
INTRINSICSAFETY OR
NON-INCENDIVEFLAMEPROOF DIVISION 2
EXPLOSION-PROOF
PTB CSA (1)or FM (1) SAA LCIE SAA CSA FM CSA or FM
EEx ia IIC T6
Class I,Division 1,
Groups(1) A, B,C, D T5
Ex ia IIC T4Ex n IIC T4
EEx d IICT6 Ex d IIB T6
Class I Division2, Groups A, B,
C, DClass II, Division2, Groups E, F,
G
Class I Division2, Groups A, B,
C, DClass II,
Division 2,Groups F, G
Class I, Division1, Groups A, B,
C, DClass II Division
1, Groups E, F, G
1. Contact your nearest sales office or sales representative for the appropriate FM entity ratings and CSA parametric ratings for each group.
W4920-1*
13
Product Flier PF51.6:8510B
Type 67AFR Filter-Regulator... TheType 67AFR provides constantlycontrolled supply pressure toactuator accessories system. This
Type 67AFR Filter-Regulator Specifications
OUTLET PRESSURESETTINGS
MAXIMUM INLETPRESSURE
(BODY RATING) ,BAR
MAXIMUMDIAPHRAGM
PRESSURE, BAR
TEMPERATURECAPABILITIES
CONNECTIONSMAXIMUM FLOW
COEFFICIENT,C
v
WEIGHT,kg
Bar Psig
0.2 to 1.20.3 to 2.12.1 to 3.42.4 to 5.5
3 to 205 to 35
30 to 6035 to 100
17.2
3.4 over outletsetting or 7.6,whichever is
greater
Nitrile diaphragmand plug: -29 to
82°CFluoroelastomerdiaphragm and
plug: -18 to 149°C
Inlet and Outlet: 1/4-inchNPT female
Vent: n 6.4 mm hole orn 1/4-inch NPT female
0.28 0.7
H410T13
Type 646 or 846 Electro-Pneumatic Transducers... Thesetransducers convert a standard 4 to20 mA dc signal to a proportionalpneumatic signal. Certifications aren CE Mark to EMC directive(electromagnetic compatibility);n Contact your nearest sales officeor sales representative for intrinsicsafe and flameproof ratings.
Type 2626 Volume Booster... Thevolume booster can be used in
conjunction with a postioner toincrease actuator stroking speed.
Others... n High-pressure supplypressure regulators, n proximityswitches, n microswitches,n solenoid valves, and n signalvolume boosters.
Contact your nearest sales office orsales representative for moreinformation.
regulator features an internal filterand limited-capacity internal relief,allowing partial reduction ofdownstream pressure.
Other AccessoriesType 3065 Limit Switch Box
The limit switch box can beinstalled on the Type 3024Sactuator to hold proximity ormicroswitches, which can turn onan alarm or display device when apre-set limit is reached. Additionalmicroswitches are available.
The device has separate cams foropen and closed positions, andadjustment of one cam does notaffect the other.
Certifications... CE Mark to EMCdirective n EN 50081 andn EN 50082
Self-Adjusting... Complicatedadjustments are not required.
StandardizedInstallation... Covered by IEC534-6 (NAMUR). The box can besupplied with a mounting kit.
W6682B
W5075
14
Product Flier PF51.6:8510BSelected Flow Coefficients
J407T05
Conversions for Other Sizing EquationsFollowing are conversions for use with other common sizing equations.
KV = (0.865) C
V
C1 = 39.76(√X
T)
Cg = C
VC
1
Km = F
L2
CS = 1/20 (C
g). C
s is only applicable for inlet pressures up to 70 bar(a).
Line-to-Valve Size Ratios Greater than 1-to-1Contact your nearest sales office or sales representative for information ondeteriming the F
P , the piping geometry factor.
VALVE SIZEValve Rotation, Degrees (Line Size Equals Valve Size)
10 30 60 90 10 30 60 90 10 30 60 90
DIN Inches CV
FL
XT
DIN or ANSI (Type 8510B Normal Flow--Seal Retainer Upstream)
DN 50DN 80
DN 100DN 150DN 200DN 250DN 300
23468
1012
2.256.2911.932.286.492.1151
19.948.282.5221382471732
58.9137222543889
15102260
80.2247434921
180035704880
- - -- - -- - -- - -- - -- - -- - -
.77
.81
.79
.71
.70
.76
.69
.76
.69
.71
.62
.66
.69
.69
.71
.57
.56
.54
.54
.49
.50
.289
.446
.325
.416
.375
.466
.429
.315
.413
.375
.394
.316
.432
.452
.497
.322
.366
.289
.284
.348
.339
.442
.230
.250
.214
.209
.156
.166
ANSI (Type 8532 Seal Side of Valve Facing Downstream)
Class 150
- - -- - -- - -- - -- - -
1416182024
95129166208322
995946
122015202370
3980542069608730
13 540
63208600
11 05013 85021 500
- - - .81 .69 .52 .51 .55 .40 .23
Class 300
- - -- - -- - -- - -- - -
1416182024
102136173214329
747995
127015702420
30604070518064109880
67909050
11 50014 25021950
- - - .81 .69 .52 .51 .55 .33 .23
ANSI (Type 8510 Normal Flow--Seal Retainer Upstream)
- - -- - -
3036
10501500
45506510
15 40022 000
35 00050 000
- - - .75 .69 .49.284.284
.413
.416.255.258
.160
.160
15
Product Flier PF51.6:8510B
Typical Actuator-Valve Size Combinations
Shown are actuator size selectionsfor two common valves. The tablesillustrate the factors that must beconsidered when determining thepressure drop and actuator size foryour application:
J407T08
VALVE TYPEVALVE SIZE DIAPHRAGM
TYPE 1051 &1052 SIZE
PISTONTYPE 1061 SIZEDIN Inches
8510B
DN 50DN 80
DN 100DN 150
DN 200, 250DN 300
2346
8, 1012
20, 33, 4033, 40
33, 40, 6040, 60
40, 60, 7060, 70
3030
30,40, 60, 6830, 40, 60, 6830, 40, 60, 68
40, 60, 68
Class 150 8560
- - -- - -- - -- - -- - -- - -
3468
1012
20, 33, 4033, 40
33, 40, 6040, 60
40, 60, 7060, 70
3030
30, 40, 60, 6830, 40, 60, 6830, 40, 60, 68
40, 60, 68
Class 300 8560
- - -- - -- - -- - -- - -- - -
3468
1012
33, 4033, 40, 60
40, 6040, 60, 70
60, 7060, 70
3030, 40, 60, 6830, 40, 60, 6830, 40, 60, 68
40, 60, 6080
Class 150 8532
- - -- - -- - -- - -
14, 16182024
40, 60, 7060, 7060, 70
- - -
40, 60, 6840, 60, 68
40, 60, 68, 8040, 60, 68, 80
Class 300 8532- - -- - -- - -
141618
60, 7060, 70- - -
68, 8068, 8068, 80
8510 - - - 30, 36 - - - 80, 100
J407T14
Note
It is not implied that theselection shown is bestfor your application.
For pressure dropslower than those shown,a lower actuator pressureor smaller actuator mightbe satisfactory.
For pressure dropshigher than those shown,a higher operatingpressure or largeractuator will be required.
Contact your sales officeor sales representativefor other sizes andoperating pressures.
With rotary valves, the highestpressure drop occurs when thevalve is shut off. When the valve isopen, pressure drop is normallymuch lower. However, pressuredrop capabilities of a rotary valvealso are lower when the valve isopen. The allowable flowingpressure drop across a valvedepends on the valve construction,valve position, the type of flowingfluid (liquid or gas), and on the vaporpressure and critical pressure ratioof liquids.
Actuator Size Selection (Shutoff Pressure Drops)
Valve size Inlet pressure and valve rating Valve component capabilities Fluid temperature Flow direction Supply pressure available Desired action (air open or air to close)
16
Product Flier PF51.6:8510B
Actuator Size Selection (Shutoff Pressure Drops) (Continued)
J407T06
Type 8510B DIN or ANSI Valve (Steel) with PTFE Seal and PTFEBearings (Forward Flow)
Type 8510B DIN or ANSI Valve (Steel) with S31600 Seal and PTFEBearings (Forward Flow)
J407T07
Only allowable shutoff pressuredrops are shown here. Todetermine the allowable flowingpressure drop, provide yoursales office or salesrepresentative with theapplication information shown onpage 19.
Do not exceed any other limitspresented in this flier. Following is abrief reminder of some of those limits:
Maximum Inlet Pressure andTemperature... Do not exceed themaximum rating of the valve (refer tothe valve type selection table).
Materials TemperatureLimits... Refer to the tablesshowing temperature capabilitiesfor valve materials, actuators, andaccessories.
VALVESIZE
ActuatorSize
ShutoffPressure Drop, Bar
Pressure to ActuatorNotes
At 38°C At 232°C Bar PsigType 1052 Push-Down-to-Close (Air Closes)
DN 50DN 80
DN 100DN 150
2346
20333340
21.949.217.049.0
21.949.217.049.0
0 - 2.80 - 2.30 - 2.80 - 3.8
0 - 400 - 330 - 400- 55
For higher pressuredrops, larger actuatorsare available.For lower pressuredrops, lower operatingpressures can be usedPressure drop at 232°C,if lower than thepressure drop at 38°C, isbased on the capabilitiesof the valve.
DN 200DN 250DN 300
81012
606070
57.921.015.5
31.017.217.2
0 - 2.30 - 2.30 - 2.3
0- 330- 330 - 33
Type 1061 Push-Down-to-Close or OpenDN 50DN 80
DN 100DN 150
2346
30303030
51.051.051.041.6
51.051.051.041.6
4.14.14.14.1
60606060
DN 200DN 250DN 300
81012
406040
31.017.214.4
31.017.214.4
6.94.15.5
1006080
VALVESIZE
ActuatorSize
ShutoffPressure Drop, Bar
Pressure to ActuatorNotes
At 38°C At 232°C Bar PsigType 1052 Push-Down-to-Close (Air Closes)
DN 50DN 80
DN 100DN 150
2346
20333340
56.364.553.857.9
3.43.43.43.4
0 - 2.80 - 2.30 - 2.80 - 3.8
0 - 400 - 330 - 400 - 55 For higher pressure
drops, larger actuatorsare available.For lower pressuredrops, lower operatingpressures can be usedPressure drop at 232°Cis based on thecapabilities of the valve.
DN 200DN 250DN 300
81012
404060
30.215.723.3
3.43.43.4
0 - 3.80 - 3.80 - 2.8
0 - 550 - 550 - 40
Type 1061 Push-Down-to-Close or OpenDN 50DN 80
DN 100DN 150
2346
30303030
56.264.553.849.0
3.43.43.43.4
6.96.96.96.9
100100100100
DN 200DN 250DN 300
81012
303040
20.910.121.1
3.43.43.4
6.96.96.9
100100120
17
Product Flier PF51.6:8510B
Dimensions
J407T09
H419T24
ActuatorType
ActuatorSize
C E
1051334060
289333473
338505749
1052
2033406070
251289333473536
256338607876849
1061
304060
171206267
378425406
6880100
324324381
483714714
Dimensions A and X (mm)
Dimensions C and E (mm)
J407T12
B2531 AX
E
C
TYPE 8510B & 8560 DIMENSION X
Valve Size DIN orANSIType
8510B
ANSI Type 8560
DINANSI,Inches
Class150
Class300
DN 50DN 80DN 100DN 150
2346
239256178362
- - -258280332
- - -274302357
DN 200DN 250DN 300
81012
392405445
360402427
395416456
TYPE 8510 & 8510 DIMENSION A
TypeValveSize,
Inches
Class150
Class300
8532
1416182024
92102115127154
118133149159181
85103036
191222
- --- - -
TYPE 8510 & 8532 DIMENSION X
TypeValveSize,
Inches
Class150
Class300
8532
1416182024
475520548718778
650683705- - -- - -
85323036
- - -- - -
819903
J407T17
J407T16
TYPE 8510B & 8560 DIMENSION A
Valve Size DINType
8510B
ANSIType
8510B
ANSI Type 8560
DINANSI,Inches
Class150
Class300
DN 50DN 80
DN 100DN 150
2346
43495670
45485657
- - -485457
- - -485459
DN 200DN 250DN 300
81012
717683
647183
847181
738392
18
Product Flier PF51.6:8510BTypical Weights
J407T10
Weights are in kilograms and are for valve and actuator combined. Not allpossible valve and actuator size combinations are shown.
Typ ica l W eigh t--W afer-S ty leType 8510B and 8560 Valves
Va lve S izeD IN o r A N S I T Y P E 85 10B A N S I Typ e 8560
Typ e 1 052A c tu a to r
Typ e 1 061A c tu a to r
C lass 150 C lass 300
D INA N S I,
In ch es
Typ e 1 052A c tu a to r
Typ e 1 061A c tu a to r
Typ e 1 052A c tu a to r
Typ e 1 061A c tu a to r
S ize W e ig h t S ize W e ig h t S ize W e ig h t S ize W e ig h t S ize W e ig h t S ize W e ig h t
D N 50D N 80
D N 100D N 150
2346
20333340
18.326.930.164.0
30303030
26.327.931.141.0
- - -203333
- - -144050
- - -303030
- - -324151
- - -333340
- - -344477
- - -303030
- - -354555
D N 200D N 250D N 300
81012
404060
76.091.0164
303040
53.068.0101
404060
92120199
303040
6997
136
406060
98188233
304080
75125263
J407T11
J407T18
Typical Weight--Wafer-StyleType 8532 and 8510 Valves
ValveSize,
Inches
ANSI TYPE 8532
Class 150 Class 300
Type 1052Actuator
Type 1061Actuator
Type 1052Actuator
Type 1061Actuator
Size Weight Size Weight Size Weight Size Weight
1416182024
40406060
- - -
117139231259- - -
4040404040
101123168196284
6060
- - -- - -- - -
213366- - -- - -- - -
686868
- - -- - -
177239283- - -- - -
Typical Weight--Type 8510Valves
ANSI TYPE 8510
ValveSize,
Inches
Type 1061Actuator
Size Weight
3036
8080
9381143
19
Product Flier PF51.6:8510B
When ordering, please specify...
Application
Type of ApplicationThrottling or on-off
Reducing or relief
Controlled Fluid
Include chemical analysis offluid if possible
Specific gravity
Fluid Temperature
Inlet Pressures
Minimum
Normal
Maximum
Pressure Drops
Minimum flowing
Normal flowing
Maximum flowing
Maximum at shutoff
Flow
Minimum controlled
Normal
Maximum
Maximum Permissible Noise Level, if Critical
Shutoff Classification Required
Line Size, Schedule, and End connection Type
Valve, Actuator, and Accessories
From this or other product flier, select your choice where evera choice is offered. If you cannot find the selection you need,contact your nearest sales office or sales representative.
H410T11
Ordering Information
20
Product Flier PF51.6:8510BFor Further Information, Contact...
Fisher ControlsMarshalltown, Iowa 50158 USACernay 68700 FranceSao Paulo 05424 BrazilSingapore 0512
The contents of th is publ icat ion are presented for informat ional purposes only, and whi le every effor t has been made to ensure their accuracy, they are not to beconstrued as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. We reserve the right to modify or improve the designs orspecifications of such products at any time without notice.
FRANCE and French-Speaking AfricaFisher-Rosemount1 rue TraversièreSilic 125F- 94523 Rungis) 1.49.79.73.00
GERMANYFisher-Gulde RegelarmaturenGmbH & Co. KGMannheimer Str. 63D-67071 Ludwigshafen) 0621.6811.0
HUNGARYFisher-RosemountErsébet Királyné útja 1/cHu- 1146 Budapest) 1.343.02.03
ITALYFisher-RosemountVia dell' Artigianato 8/12I-20053 Muggió (Mi)) 2.274.291
NETHERLANDSFisher-RosemountPatrijsweg 140NL-2289 EZ Rijswijk) 070.340.96.66
NORWAYSolberg & AndersenPostboks 34 BrynN - 0611 Oslo) 22.63.57.00
AUSTRIAFisher-RosemountIndustrie - Zentrum No SudStraße 2a, obj M29A- 2351 Wr. Neudorf) 2236.607
BELGIUMFisher-Rosemountde Kleetlaan 4B-1831 Diegem) 2.716.77.11
CISFisher-RosemountMalaya Trubetskaya 811th floorCIS-119881 Moscow) 095.245.86.86
CZECH RepFisher-RosemountV olsinách 75Cz- 100 97 Praha 10) 2-8100.2666
DENMARKFisher-RosemountHejrevang 11DK-340 Allerød) 45.48.17.03.33
FINLANDOy Valmet-RosemountSinimaentie 10BFIN - 02630 Espoo) 0523.500
POLANDFisher-RosemountAl. Wilanowska 272PL- 02665 Warszawa) 22.473.766
PORTUGALFisher-RosemountRua Alfredo da Silva 8P-2720 Alfragide) 1.471.32.08
SLOVAK RepFisher-RosemountHanulova 5/bSR- 84101 Bratislava) 07.787.811
SPAINFisher-RosemountCtra Fuencarral-AlcobendasKm 12.2; Edificio Auge 1E-28049 Madrid) 1.358.91.41
SWEDENPEABIlanda GårdS - 65350 Karlstad) 054.530750
SWITZERLANDFisher-RosemountBlegistr. 21CH-6341 Baar) 41.768.61.11
UNITED KINGDOM and Middle EastFisher-RosemountKnight Road, StroodGB-Rochester, Kent ME2 2EZ) 01634.73.60.00