THE ENGINEERING DESIGN PROCESS
How organization can improve creativity
Robotics and Automation
Copyright © Texas Education Agency, 2012. All rights reserved. 1
Overview The Engineering Design process has
several steps. The process is typically repeated to
improve the design.The process itself is iterative or cyclical.Think of how many times the iPhone has been
improved. There is no single process that works for
every project.
Copyright © Texas Education Agency, 2012. All rights reserved.2
Engineering Design Vs. Scientific Method There are important differences between the
Scientific Method and Engineering Design. The distinguishing features of Engineering
Design include:taking into account specifications and constraints; dependence on iteration; and the embrace of multiple possible solutions.
The differences in the two lists reflect the basic differences between science and engineering—scientists investigate and engineers create.
Copyright © Texas Education Agency, 2012. All rights reserved.3
Scientific Inquiry:
Demands evidence Is a blend of logic and imagination Explains and predicts Tries to identify and avoid bias Is not authoritarian Attempts to justify one answer or
solutionCopyright © Texas Education Agency, 2012. All rights reserved.
4
Engineering Design
Is purposeful Is based on certain requirements Is systematic Is iterative Is creative Allows many possible solutions
Copyright © Texas Education Agency, 2012. All rights reserved.5
Watch the video
Here is a nice video from TeachersDomain.org:
Web Site
Video
6Copyright © Texas Education Agency, 2012. All rights reserved.
The basic steps
Identify the challenge Research and brainstorm Design a solution Test ideas Evaluate Build!
Copyright © Texas Education Agency, 2012. All rights reserved.7
Identify the Challenge
Determine the problem you are trying to solve.
Identify specific requirements. What are the constraints? Are there any size, weight, or budget
limitations? You WILL have a plan. You need to be able to write a few short
statements that explain what you want to do.Copyright © Texas Education Agency, 2012. All rights reserved.
8
Research and Brainstorm Gather information. Identify specific details of the problem and
solution. Identify possible and alternative solutions. What construction methods are
appropriate?Factor in materials cost and availability.
What are the social and environmental effects of your design?Are there health and safety factors?
Copyright © Texas Education Agency, 2012. All rights reserved.9
Design a Solution
Prepare drawings and engineering plans. Drawing can start out simple but will
become more detailed as you settle on a design.
You WILL have some working drawings.Shape and form are important to strength,
stability, and safety.How does it move?Where does it get power?How does it sense the environment?
Copyright © Texas Education Agency, 2012. All rights reserved.10
Test Ideas
Build a model or prototype. Does the design perform the required
functions? Do the drawings assist you for construction? Test and troubleshoot the design. Determine a working schedule. Simple projects may not need a model.
Copyright © Texas Education Agency, 2012. All rights reserved.11
Evaluate
Does the design solve the problem? Figure out what works and what does
not work. Here is where you can go back and
redesign. Evaluate the planning process. Make sure each specification is satisfied. Do you have the necessary tools and
equipment?
Copyright © Texas Education Agency, 2012. All rights reserved.12
Build!
The whole point of engineering is to build something.
Evaluate both before and after construction. Was your design practical?
Was it hard or easy to build? Do not start building before you have a plan
and a drawing!
Copyright © Texas Education Agency, 2012. All rights reserved.13
Engineering Design Characteristics
First, it is purposeful. A designer begins with an explicit
goal that is clearly understood. Design can be pictured as a journey
with a particular destination, rather than a sightseeing trip.
Copyright © Texas Education Agency, 2012. All rights reserved.14
Copyright © Texas Education Agency, 2012. All rights reserved.
Second, designs are shaped by specifications and constraints.
Specifications spell out what the design is intended to accomplish.
Constraints are limitations the designer must contend with, such as costssize requirementsthe physical limitations of the
materials used.
15
Copyright © Texas Education Agency, 2012. All rights reserved.
Third, the design process is systematic and iterative.
In addition, Engineering Design is a highly social and collaborative enterprise.
Engineers engaged in design activities often work in teams.
Communication with clients and others who have a stake in the project is crucial.
16
Other Considerations
KISSKeep It Simple Stupid
TIMTOWTDIThere Is More Than One Way To Do It
Copyright © Texas Education Agency, 2012. All rights reserved.17
The Process Is Iterative!
The cycle can continue over and over again.Continuous process improvement
You can jump in and out of the process at different points.
Some engineers specialize in one or a few steps.
The Engineering Design process is a way of managing creativity.
Copyright © Texas Education Agency, 2012. All rights reserved.18
What Works Best?
No single engineering design process is used by everyone.Goals are often unknown when a design
project begins.Requirements and assumptions can change
during the project. Every process has a research, a design,
and a building phase.You MUST have objectives and criteria.
Copyright © Texas Education Agency, 2012. All rights reserved.19
Copyright © Texas Education Agency, 2012. All rights reserved.
There is never just one “correct” solution to a design challenge.
Instead, there are a number of possible solutions.
Choosing among them inevitably involves personal as well as technical considerations.
Design is not a linear, step-by-step process. Each new version of the design is tested
and then modified based on what has been learned up to that point.
20
Evaluation
With data in hand, the engineer can evaluate how well the various solutions meet the specifications and constraints of the design.
The trade-offs needed to balance competing or conflicting constraints must be considered.
Engineers call this process optimization.
Copyright © Texas Education Agency, 2012. All rights reserved.21