7 inches of 20 gauge copper wire7 inches of 28 gauge copper wire (cut in half to attach pink beads to the base)1 glass bead - size 4 mm2 pink beads - size 2,5 mm
Tools:Round Nose PliersWire Cutters
Step 1:
Insert one glass bead onto the wire and make a little loop with bead inside
Step 2:Create two loops as shown on the photo
Step 3:
Trim one wire
Step 4:
Create two loops as shown on the photo
Step 5:
Bend wire as shown on the photo, then create a hook shape in order to make a final loop. Trim wire if you need to
Step 6:
Wrap one thin wire around the base as shown on the photo, then insert pink bead onto the wire
Step 7:
Now wrap the wire around the base as shown. Trim all the wires
Step 8:
Repeat step 6 and 7 with second pink bead. Add chain to your pendant. Your necklace is ready to wear!