Transcript
Page 1: How to use the scanner

How to use the scanner• This process will

teach you how to use the scanner

• Press yellow button to turn power on

• In the top left corner tap “start”

Page 2: How to use the scanner

Asset Advantage• In the drop down

menu tap “Asset Advantage”

• Then tap “Asset Inventory”

Page 3: How to use the scanner

When asked for the date• Make sure you are in

the current month• If you are in the

current month tap “NEXT”

Page 4: How to use the scanner

LOCATIONS• You will first need to

scan the door tag• The scanner will beep• It will replace any

numbers currently in this field

• Look at the room number to make sure it is correct

• Then tap “OK”

Page 5: How to use the scanner

Inventory-Entry• First Check the “quick

scan box”• Then scan the first

asset

Page 6: How to use the scanner

Scanning an Asset

• When you scan the first asset it will ask you “Unlisted item add to inventory”

• First check the box that says “do not show again”

• Then tap “yes”• Now scan all items in this

room

Page 7: How to use the scanner

Changing locations• When you are finished

scanning a room you must change the location

• Go to the bottom and tap “mode”

• Then tap “Location”• It will go back to the

location screen• You must do this step

every time you enter a new room!

Page 8: How to use the scanner

LOCATIONS• You will be back at

the location screen • Repeat the above

processes for every room and it’s items


Top Related