-
Charles Williams Jr.
Cell 832-221-8566 HM 281-332-8105
Field Technician/Safety Coordinator
SUMMARY
Field Service Engineer/Safety Coordinator with 10 plus years experience as a control system
engineer, and instrumentation technician. Developed test procedures, performed diagnosis tests
to commission the installation of the control systems. Safety team member, Assist in the
enforcing Health and Safety relegation at field location and performed safety inspections at Oil
and Gas refinery. I have strong communication and organizations skills to motive maintenance
and electronic technicians to performed daily task.
EDUCATION
Wind Power Technician (Wind Turbine), Diploma, Michigan Institute Aviation Technology, Houston TX,
Safety Certifications Industrial Hygiene and Safety, Deer Park TX
Industrial Engineering Technology (Electronic/Electrical), BS California State University Long Beach, Long Beach CA
SAFETY CERTIFICATIONS
NCCER Field Safety
NCCER CSST
NCCER Safety Technology
NCCER CSSS
OSHA 30hr Construction
Safe Land & Safe Gulf
Permit Writing
40hr Hazwoper
Climb and Rescue Certificate
Lifting and Rigging Certificate
Personal Protection Equipment (PPE)
Lockout Tag out control of Hazardous Energy
Project Management Certificate
Certified in CPR
5 Ton Overhead Crane Training
TECHNICAL SKILLS
Interpreted Mechanical &Electrical Schematics
Train inspectors and technicians
Instrument Controls & Electrical Technician
Test Engineer Manager
Troubleshoot Hardware and Electrical Systems
Knowledge of instrumentation
Precision Measuring of Hardware Write Technical Reports
Project Manager Project scheduling, cost and quality control
-
Charles Williams Jr.
Cell 832-221-8566 HM 281-332-8105
Field Technician/Safety Coordinator
SOFTWARE SKILLS MS Outlook, Access, Excel, Word, Power Point, Project Office and Microsoft Suite
PROFESSIONAL EXPERIENCE
HydroChem, Deer Park, TX 05/14-NOW
SAFETY COORDINATOR
Safety Coordinator for Refineries turnarounds
Coordinate daily safety employees meeting at field locations to cover safety procedures.
Participate and lead incident investigations to determine root cause and recommend preventive safety measures.
Prepare safety reports with recommendations for corrective actions.
Involved in the training of technicians in the correct use of JSAs. Train technicians to recognize the risk related to the job tasks, and implement safety improvements.
Experience in Process Safety Management
Coordinate Emergency Response teams
Experience in Safety Auditing
Reygen Energy, San Antonio, TX 03/14-5/14
SAFETY FIELD TECHNICIAN
Team lead for removal of hazards waste (OIL) from Texas beaches
Responsible for correct use of PPE to remove Hazard waste
Set up oil absorbing material, at offshore and beach locations.
Coordinate daily safety employees meeting at field locations to cover safety procedures.
Inspect specified Hazard areas to determine the degree of danger that may affect technicians
Investigate incident to determine cause or causes and recommend preventive safety measures.
Prepare safety report with recommendations for corrective actions.
Granite Services, (Affiliate GE Oil and Gas) Houston, TX 04/12-04/13
TECHNICAL ADVISOR, FIELD SERVICE TECHNICIAN
Project manager for remanufacturing facilities for oil production marine risers. Liaison between riser manufactures and GE Oil&Gas Corporation.
Improve project management process to determine the scope, time and resource requirements to repair and inspect the marine risers.
Assist with the project scheduling, cost and quality control. Work with vendors to insure on time delivery of marine riser parts.
-
Charles Williams Jr.
Cell 832-221-8566 HM 281-332-8105
Field Technician/Safety Coordinator
Expedite the marine riser repair work packages for close out and report daily progress to GE and Transocean corporations for onshore and offshore operations.
Inspect marine riser hardware, repair onshore and offshore operations
Safety team Technician: 1. Attend customers weekly safety meeting 2. Observe technicians to determine the correct use of prescribed safety equipment
and safety procedures.
3. Demonstrate use of safety equipment 4. Investigate incidents to determine cause or causes and recommend preventive
safety measures.
5. Safety Audits
Boeing Space, Houston, TX 06/89 - 09/11
CONTROL SYSTEM TEST ENGINEER
Development system-level requirements, verification & validation planning, and troubleshoot industrial control systems.
Project Engineer/Lead, provided test planning support; draft test plans and identifies possible problems in test execution and planning Integration Laboratory
Lead a Safety team to investigated the safety problems relating to removal of flight control space lab equipment and the re-commission of the new flight control lab
1. Oversee the safe removal of all out dated flight control electronic equipment 2. Made sure the correct PPE for the removal Hazard waste 3. Maintain Inspection, health & safety documents during this project and the
completion.
4. Involved in pre-started up safety reviews and follow up with safety related action items until project was completed.
5. Compile and submit accident data for management and OSHA.
Basic Plus
US Passport
TWIC Transportation Worker Identification Credential
BOSIET, Basic Offshore Safety Induction and Emergency Training Certification
HUET Water Survival
Medical Certificate for Offshore Work