![Page 1: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/1.jpg)
LJB University™ has been approved as an Authorized Provider by the International Association forContinuing Education and Training (IACET), 1760 Old Meadow Road, Suite 500, McLean, VA 22102. .
IMPACT OF ANSI STANDARDS ON FALL PROTECTION
EQUIPMENT PURCHASETHOMAS E. KRAMER, P.E., C.S.P. - PRINCIPAL
[email protected]; Phone: (937) 259-5120KIM K. MESSER, [email protected]; Phone: (937) 259-5000
![Page 2: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/2.jpg)
22
LEARNING OBECTIVES
Discuss why the ANSI Z359 standards are changing
Discuss the financial impact of making the wrong
decision
Explain how to best incorporate new standards into
your program
Identify keys areas for immediate attention
![Page 3: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/3.jpg)
33
CALL TO ACTION
Evaluate your existing systems
Consider changes to your training
Inform workers of the differences
Determine which of the case studies apply to your
organization and apply lessons learned
![Page 4: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/4.jpg)
44
SHORT ANSWER
1. Why do you think organizations struggle with
implementation of new ANSI standards?
2. How long after the publishing of an ANSI standard
does your organization want to be fully
implemented? Why?
3. How confusing will this transition be for your
organization?
![Page 5: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/5.jpg)
55
AGENDA
Background – regulations and standards
Which standard is current?>Equipment
>Anchorages
Case studies
Overview of current and proposed fall protection
standards
![Page 6: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/6.jpg)
66
TOTAL FALL FATALITIES
578 610653 625 634
659 700638
604
738
664
738 746
593 617
0100
200
300
400
500600
700
800
FATALITIES
1995 1997 1999 2001 2003 2005 2007 2009YEAR
Source: BLS Census of Fatal Occupational Injuries
![Page 7: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/7.jpg)
77
HIERARCHY OF CONTROL
Defeatability
Effe
ctive
ness
Elimination
Substitution
Engineering controls
Administrative controls
Personal protective equipment (PPE)
![Page 8: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/8.jpg)
88
OSHA VS. ANSI
OSHA
Is the law
Regulations are created
through the legislative
process
Significant challenge in
creating and updating
regulations
ANSI
Voluntary standard
Establish state of the art
requirements and are
created by experts from all
sides of the industry,
sometimes including OSHA
VS.
![Page 9: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/9.jpg)
99
OSHA
Draft Proposed Safety and Health Program Rule (core elements of a health and safety program); interpretation letters & memos; compliance directives
General Industry (1910) Construction (1926)
Subpart D (1910) – walking and working surfaces Subpart M (1926) – fall protection
Proposed subpart D (1910) – walking and working surfacesProposed subpart I (1910) – personal protective fall equipment(both documents originally proposed in April 1990)
Subpart X (1926) – stairs and ladders
Subpart L (1926) – scaffolding
Subpart F (1910) – powered and vehicle-mounted work platform and manlifts1910.66 Appendix C – fall protection for Subpart F
Subpart R (1926) – steel erection
Subpart N (1926) – cranes, derricks, hoists, elevators and conveyors
Subpart J (1910) – permit-required confined spaces Subpart E (1926) – personal protective & life saving equipment
Subpart N (1910) – material handling and storage Subpart C (1926) – general safety & health provisions
Subpart R (1910) – electric power generation and telecommunications Subpart S (1926) – underground construction (tunnels)
STD 1-1.13 – Fall protection in general industry (frequency of hazard exposure used to determine abatement)
Subpart V (1926) – power transmission and distribution
ANSI
ANSI A14 series – ladders (portable & fixed)ANSI A92 series – lifts
ANSI/ITSDF B56.1 – fork lifts
General Industry Construction
ANSI Z359.1-1992 – fall arrest equipment ANSI Z359-2007 – effective date: (11/24/07)ANSI Z359.6 – effective (11/16/09)ANSI Z359 component standards – under developmentANSI A1264 series – walking working surfaces and stairsANSI/IWCA I14.1 – window cleaning safety
ANSI A10.32 – fall protection equipmentANSI A10 series – safety in construction and demolition
![Page 10: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/10.jpg)
1010
OSHA
Draft Proposed Safety and Health Program Rule (core elements of a health and safety program); interpretation letters & memos; compliance directives
General Industry (1910) Construction (1926)
Subpart D (1910) – walking and working surfaces Subpart M (1926) – fall protection
Proposed subpart D (1910) – walking and working surfacesProposed subpart I (1910) – personal protective fall equipment(both documents originally proposed in April 1990)
Subpart X (1926) – stairs and ladders
Subpart L (1926) – scaffolding
Subpart F (1910) – powered and vehicle-mounted work platform and manlifts1910.66 Appendix C – fall protection for Subpart F
Subpart R (1926) – steel erection
Subpart N (1926) – cranes, derricks, hoists, elevators and conveyors
Subpart J (1910) – permit-required confined spaces Subpart E (1926) – personal protective & life saving equipment
Subpart N (1910) – material handling and storage Subpart C (1926) – general safety & health provisions
Subpart R (1910) – electric power generation and telecommunications Subpart S (1926) – underground construction (tunnels)
STD 1-1.13 – Fall protection in general industry (frequency of hazard exposure used to determine abatement)
Subpart V (1926) – power transmission and distribution
ANSI
ANSI A14 series – ladders (portable & fixed)ANSI A92 series – lifts
ANSI/ITSDF B56.1 – fork lifts
General Industry Construction
ANSI Z359.1-1992 – fall arrest equipment ANSI Z359-2007 – effective date: (11/24/07)ANSI Z359.6 – effective (11/16/09)ANSI Z359 component standards – under developmentANSI A1264 series – walking working surfaces and stairsANSI/IWCA I14.1 – window cleaning safety
ANSI A10.32 – fall protection equipmentANSI A10 series – safety in construction and demolition
![Page 11: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/11.jpg)
1111
OSHA
Draft Proposed Safety and Health Program Rule (core elements of a health and safety program); interpretation letters & memos; compliance directives
General Industry (1910) Construction (1926)
Subpart D (1910) – walking and working surfaces Subpart M (1926) – fall protection
Proposed subpart D (1910) – walking and working surfacesProposed subpart I (1910) – personal protective fall equipment(both documents originally proposed in April 1990)
Subpart X (1926) – stairs and ladders
Subpart L (1926) – scaffolding
Subpart F (1910) – powered and vehicle-mounted work platform and manlifts1910.66 Appendix C – fall protection for Subpart F
Subpart R (1926) – steel erection
Subpart N (1926) – cranes, derricks, hoists, elevators and conveyors
Subpart J (1910) – permit-required confined spaces Subpart E (1926) – personal protective & life saving equipment
Subpart N (1910) – material handling and storage Subpart C (1926) – general safety & health provisions
Subpart R (1910) – electric power generation and telecommunications Subpart S (1926) – underground construction (tunnels)
STD 1-1.13 – Fall protection in general industry (frequency of hazard exposure used to determine abatement)
Subpart V (1926) – power transmission and distribution
ANSI
ANSI A14 series – ladders (portable & fixed)ANSI A92 series – lifts
ANSI/ITSDF B56.1 – fork lifts
General Industry Construction
ANSI Z359.1-1992 – fall arrest equipment ANSI Z359-2007 – effective date: (11/24/07)ANSI Z359.6 – effective (11/16/09)ANSI Z359 component standards – under developmentANSI A1264 series – walking working surfaces and stairsANSI/IWCA I14.1 – window cleaning safety
ANSI A10.32 – fall protection equipmentANSI A10 series – safety in construction and demolition
![Page 12: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/12.jpg)
1212
OSHA
Draft Proposed Safety and Health Program Rule (core elements of a health and safety program); interpretation letters & memos; compliance directives
General Industry (1910) Construction (1926)
Subpart D (1910) – walking and working surfaces Subpart M (1926) – fall protection
Proposed subpart D (1910) – walking and working surfacesProposed subpart I (1910) – personal protective fall equipment(both documents originally proposed in April 1990)
Subpart X (1926) – stairs and ladders
Subpart L (1926) – scaffolding
Subpart F (1910) – powered and vehicle-mounted work platform and manlifts1910.66 Appendix C – fall protection for Subpart F
Subpart R (1926) – steel erection
Subpart N (1926) – cranes, derricks, hoists, elevators and conveyors
Subpart J (1910) – permit-required confined spaces Subpart E (1926) – personal protective & life saving equipment
Subpart N (1910) – material handling and storage Subpart C (1926) – general safety & health provisions
Subpart R (1910) – electric power generation and telecommunications Subpart S (1926) – underground construction (tunnels)
STD 1-1.13 – Fall protection in general industry (frequency of hazard exposure used to determine abatement)
Subpart V (1926) – power transmission and distribution
ANSI
ANSI A14 series – ladders (portable & fixed)ANSI A92 series – lifts
ANSI/ITSDF B56.1 – fork lifts
General Industry Construction
ANSI Z359.1-1992 – fall arrest equipment ANSI Z359-2007 – effective date: (11/24/07)ANSI Z359.6 – effective (11/16/09)ANSI Z359 component standards – under developmentANSI A1264 series – walking working surfaces and stairsANSI/IWCA I14.1 – window cleaning safety
ANSI A10.32 – fall protection equipmentANSI A10 series – safety in construction and demolition
![Page 13: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/13.jpg)
1313
WHICH STANDARD IS CURRENT?
Past (pre November 2007)> ANSI Z359.1-1992(R1999)
• Harnesses
• Lanyards
• PEA
• Self-retracting devices
• Etc.
![Page 14: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/14.jpg)
1414
WHICH STANDARD IS CURRENT?
Present (November 2007 until 2014?)> ANSI Z359 component standards, where applicable
• ANSI Z359.12-2009 (connectors)
• ANSI Z359.13-2009 (personal energy absorbers and lanyards)
• ANSI Z359.14-2012 (Self-retracting devices)
> ANSI Z359.1-2007, when component standard does not exist
• Examples: harnesses, anchorage connector straps, vertical
lifelines, fall arrestors
![Page 15: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/15.jpg)
1515
WHICH STANDARD IS CURRENT?
Future (2014? and beyond)> ANSI Z359 component standards
![Page 16: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/16.jpg)
1616
WHAT EQUIPMENT DO I PURCHASE?
How quickly do you replace the product?> Depends
• Weight used for test
• Energy absorber
• Fall factor 2
• Misuse of connectors
• Self-retracting device over an edge
• Is there a component standard yet?
![Page 17: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/17.jpg)
1717
ANCHORAGES
ANSI Z359.6-2009
ANSI Z359.2-2007 (caution)
OSHA
ANSI includes requirements for certification of systems
![Page 18: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/18.jpg)
1818
AGENDA
Background – regulations and standards
Which standard is current?>Equipment
>Anchorages
Case studies
Overview of current and proposed fall protection
standards
![Page 19: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/19.jpg)
1919
CASE STUDY #1
Organization is still using connectors that meet ANSI Z359.1-
1992 (R1999) standard
The issues:> Gate strength was 220 lbs. (front) and 350 lbs. (side)
> Gate strength now 3,600 lbs. (front and side)
> Bending of connector not addressed
![Page 20: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/20.jpg)
2020
CASE STUDY #1
The solution> Existing connectors safe, new connectors safer
> Use connectors that meet Z359.1-2007 or Z359.12-2009
![Page 21: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/21.jpg)
2121
CASE STUDY #2
Organization is still using lanyards that meet ANSI Z359.1-2007
or earlier standards
The issues:> Test mass for energy absorbers being increased to 282 lbs.
> No equipment manufacturer has recalled a lanyard
![Page 22: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/22.jpg)
2222
CASE STUDY #2
The solution> Use ANSI Z359.13-2009 rated lanyard and/or limit use of pre-
2009 lanyards to 130 to 242 lbs.
![Page 23: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/23.jpg)
2323
CASE STUDY #3
Leading edge application for SRLs and VLLs
The issues:> Some SRLs do not work in a horizontal arrangement
> Energy absorber is located close to the anchorage instead of
close to body
![Page 24: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/24.jpg)
2424
CASE STUDY #3
The solution> For SRLs, you will soon be able to
purchase equipment that meets
the ANSI Z359.14-2012 standard
> For VLLs, provide protection to
lifeline and keep energy absorber
close to the person’s body
![Page 25: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/25.jpg)
2525
CASE STUDY #4
“Ballast” style anchorage is determined to be best solution
The issues:> There is not an ANSI Z359 standard that addresses this yet
> These systems are dependent on the surface and other conditions
> In many cases, they move
![Page 26: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/26.jpg)
2626
CASE STUDY #4
The solution> Critically evaluate and get site-specific data
> It will be at least 18 months before this is addressed in
ANSI Z359.18-20XX
![Page 27: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/27.jpg)
2727
CASE STUDY #5
Proprietary horizontal system is needed
![Page 28: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/28.jpg)
2828
CASE STUDY #5
The issues:> There is not an ANSI Z359 standard that addresses this yet
> Price by “turnkey” installers can vary greatly on what is provided
> “Bridging documents” are often absent
The solution> Critically evaluate, have a preliminary design and prepare a
specification to “qualify” systems
> It will be at least 9 months before they are addressed in ANSI
Z359.17-20XX
![Page 29: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/29.jpg)
2929
CASE STUDY #6
Horizontal lifelines overstressed when the workers weight
exceeded 250 pounds
![Page 30: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/30.jpg)
3030
CASE STUDY #6
The issues:> Most “proprietary” horizontal lifeline systems are only designed
for a 220 lbs (100kg) user weight
> Test mass for energy absorbers being increased to 282 lbs.
The solution> De-rate horizontal lifeline or use new lanyards that meet ANSI
Z359.13-2009
> Verify the maximum user weight for your specific system
![Page 31: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/31.jpg)
3131
CASE STUDY #7
Load testing seems to be needed
for my system
![Page 32: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/32.jpg)
3232
CASE STUDY #7
The issues:> The only information in an ANSI standard (I14.1) addresses this
incompletely – in my opinion
> What do I load it to and will this load damage it?
> What should I load test?
The solution> Prepare a project-specific load testing manual and load testing plan
> It will be at least 24 months before they are addressed in ANSI
Z359.6-20XX
![Page 33: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/33.jpg)
3333
AGENDA
Background – regulations and standards
Which standard is current?>Equipment
>Anchorages
Case studies
Overview of current and proposed fall protection
standards
![Page 34: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/34.jpg)
3434
Z359.1: Safety requirements for personal fall arrest systems…
Z359.3: Safety requirements for positioning and travel restraint systems
Z359.4: Safety requirements for assisted-rescue and self-rescue systems…
Z359.2: Minimum requirements for a comprehensive managed fall protection program
Z359.0: Definitions and nomenclature
ANSI Z359-2007 FAMILY OF STANDARDS
![Page 35: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/35.jpg)
3535
Z359.6: Specifications and design requirements for active fall-protection systems
Z359.12: Connecting Components for Personal Fall Arrest Systems
Z359.13: Personal Energy Absorbers and Energy Absorbing Lanyards
Z359.0: Definitions and nomenclature (UPDATED)
Effective on 16 Nov 2009
ANSI Z359-2009 FAMILY OF STANDARDS
![Page 36: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/36.jpg)
3636
RECENT Z359 STANDARDS
ANSI Z359.7-2011> Requirements for Third-Party & Self-Certification for Personal Fall
Arrest Systems (PFAS)
ANSI Z359.14-2012> Safety Requirements for Self Retracting Devices
![Page 37: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/37.jpg)
3737
FUTURE Z359 STANDARDS
ANSI Z359.5-20XX> Safety Requirements for Personal Fall Arrest Systems (PFAS)
ANSI Z359.8-20XX> Rope Access Systems
ANSI Z359.9-20XX> Safety Requirements/Personal Equipment for Protection Against
Falls - Descending Devices
![Page 38: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/38.jpg)
3838
FUTURE Z359 STANDARDS
ANSI Z359.11-20XX> Safety Requirements for Full Body Harness
ANSI Z359.15-20XX> Safety Requirements for Lifelines and Fall Arresters
ANSI Z359.16-20XX> Safety Requirements for Lifelines, Rails, and Fall Arresters for Fixed
Ladder Fall Arrest Systems
ANSI Z359.17-20XX> Safety Requirements for Horizontal Lifelines
ANSI Z359.18-20XX> Safety Requirements for Anchorage Connectors
![Page 39: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/39.jpg)
3939
FALL PROTECTION STANDARDS
Z359> Non-construction
A1264> Walking/working surfaces and
stairs
A10.32> Construction
I14.1> Window cleaning safety
A14> Ladders
A92> Aerial lifts
![Page 40: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/40.jpg)
4040
CALL TO ACTION
Evaluate your existing systems
Consider changes to your training
Inform workers of the differences
Determine which of the case studies apply to your
organization and apply lessons learned
![Page 41: Impact of ANSI Standards on Fall Protection Equipment Purchase](https://reader036.vdocument.in/reader036/viewer/2022062703/5555c0f3d8b42afe5d8b52c7/html5/thumbnails/41.jpg)
LJB University™ has been approved as an Authorized Provider by the International Association forContinuing Education and Training (IACET), 1760 Old Meadow Road, Suite 500, McLean, VA 22102. .
IMPACT OF ANSI STANDARDS ON FALL PROTECTION
EQUIPMENT PURCHASE
THOMAS E. KRAMER, P.E., C.S.P. - [email protected]; Phone: (937) 259-5120