Download - Incline plate settlement tanks - Prime Pump
Incline plate settlement tanks
Specification HL20 HL40 HL50
Settlement area 20 m² 40 m² 50 m²
Operation capacity 1-20 m³/hr 1-40 m³/hr 1-50 m³/hr
Seperation material Suspended solid particles
Tank height 2.2m 2.4m 3.2m
Tank length 1.8m 2.1m 2.2m
Tank width 2.2m 2.2m 2.5m
Dry weight 1.15 T 2.5 T 2.5T
connections 4” & 6”
EnviroHub tanks by Prime Pump
are designed to effectively recover
suspended solid particles from
water in continuous pumping
applications.
It is a simple but effective way
of ensuring that environmental
pollution concerns of high
suspended solids in water, from
activity such as groundwork
dewatering and silt laden wash
water are safely met. This ensures
compliance with authorities and
water standards requirements.
These tanks are typically used with
3”, 4”, or 6” pumps depending on
the flow rate required, however,
where there are greater volumes
multiple units can be easily
connected in parallel to increase
settlement capacity.
Silt laden contaminated water is fed
into the unit in the back chamber,
where it flows around into the
base of the lamella plate section of
the tank. The water stream flows
upward between the Lamella plates.
With the slower flow, the solids fall to
the plate surface, where they slide by
gravity down the plate, to the sludge
collection chamber at the bottom.
The sludge is then periodically
drained down using the valve at the
bottom of the hopper.
About How it works:
Features
• Discharge ports for sludge and water • Motorised solids rake • Removable Lamella plates for easy cleaning • Tapered sludge tank for fast effective sludge removal • Oil water separation & final polishing point if required • Provision for additional monitoring control to report on
final water quality • Flocculation area • Ladder access for maintenance on some models
Benefits
• Safe solution for removing solids from water and minimising environmental damage to water courses
• Ensure compliance with Authority requirements • Provides water suitable for safe discharge to
stormwater.• A settling pond with only 10% of the footprint.• Easy and fast to deploy minimal set up required • Suitable for all suspended solids settlement • Unlimited process time without complete washout • Flocculant cages built in for basic water treatment • Easy transportation: lifting points or fork pockets
0800 482 747 | +64 3 768 [email protected] | www.primepump.co.nz