PREFACE
SUMMARY OF THE PRODUCTS:
1. Various I/O Boards for symmetrical and asymmetrical PDH signal distribution with special
interconnection cables to fit all equipment types
2. Cable assemblies for power, traffic or control signals
3. RF accessories: hybrids, adaptors, coaxial cables, OMTs.. etc to further enhance NEC Microwave
equipment configuration versatility (1+0, 1+1, 2+0.. system)
4. Measuring tools and systems for test and demonstration purposes
Page ii
This catalogue introduces the product portfolio offered by Scientis Solutions Ltd. for mainly NEC microwave equipment. These products include base-band connection interfaces, RF accessories and These products include base-band connection interfaces, RF accessories and measuring tools and all of these accessories were developed and manufactured based on specific customer requirements in accordance with the quality standards of NEC Corporation.
CATALOGUEApril 2010
Indoor Accessories RF Accessories Measuring tools
CONTENTSA. INDOOR ACCESSORIES (GP SERIES)
1. I/O Boards2. Cable Assemblies3. I/O Board Sets4. Pin Layout
B. RF ACCESSORIES (IS SERIES)
1. OMT (Ortho Mode Transducer)2. Hybrid for 2 ODUs3. Hybrid for 4 ODUs (Single Polarization)4. Hybrid for 4 ODUs (Dual Polarization)5. Mounting Bracket6. Waveguide Transducer7. Low Loss Cables
C. Measuring Tools (IS Series)
1. Measuring Tools
PAGE
1 - 67 - 1112 - 1314
1516 - 2122 - 2324 - 25262728
29
Page i
I/O BOARD CONNECTION GUIDEI/O BOARD CONNECTION BETWEEN RADIO (IDU) AND I/O BOARD
Page 1
SAMPLE 1: I/O BOARD SET FOR 16E1 WITH BNC CONNECTOR PART NO. NEC-10BSET-N16-32-BNC
SAMPLE 2: I/O BOARD SET FOR 32E1 WITH SMB CONNECTOR PART NO. NEC-10BSET-N48-64MB-SMB
Incl: 1pc NEC -10B-32 BNC 2pcs NEC-TRCB-D37-SCRW
Incl: 1pc NEC -10B-32 BNC 2pcs NEC-TRCB-D37-SCRW
Connector Guide
IDU – INTERFACE CARD (e.g.) 2M IN/OUT
INTERFACE
CONNECTOR
PHOTO
PASOLINK NEO – 16E1 DSUB 37 pin
connector
PASOLINK NEO – 32E1 MDR 68 pinconnector
CONNECTOR GUIDE
IDU – I/O Board connection
SCHEMATIC DRAWING BACK SIDE OF THE I/O BOARD
A. Indoor Accessories (GP series)
1.1
1. I/O BOARDS
Specification • Capacity: 16E1
• BNC socket connectors (32pcs)
• 1U high
• 19” rack compatible
• 2xDSUB37 plug connectors on the rear
• RoHS compliant
Cable Accessories• DSUB37-DSUB37 interconnection cable
(NEC-TRCB-D37-SCRW; 2pcs)
or
• MDR68-2xDSUB37 interconnection cable
• (NEC-TRCB-M68-STD)
• for ordering I/O Board with cables see I/O Board Sets
Page 2
I/O BOARD FOR 16E1 WITH BNC CONNECTORS PART NO.: NEC-IOB-32M-BNC
1.2
Specification • Capacity: 16E1
• 1.6/5.6 socket connectors (32pcs)
• 1U high
• 19” rack compatible
• 2xDSUB37 plug connectors on the rear
• RoHS compliant
Cable Accessories• DSUB37-DSUB37 interconnection cable
(NEC-TRCB-D37-SCRW; 2pcs)
or
• MDR68-2xDSUB37 interconnection cable
(NEC-TRCB-M68-STD)
• for ordering I/O Board with cables see I/O Board Sets
I/O BOARD FOR 16E1 WITH 1.6/5.6 CONNECTORS PART NO.: NEC-IOB-32M-1656
1.3
Specification • Capacity: 16E1
• SMZ (BT43) male connectors (32pcs)
• 1U high
• 19” rack compatible
• 2xDSUB37 plug connectors on the rear
• RoHS compliant
Cable Accessories• DSUB37-DSUB37 interconnection cable
(NEC-TRCB-D37-SCRW; 2pcs)
or
• MDR68-2xDSUB37 interconnection cable
(NEC-TRCB-M68-STD)
• for ordering I/O Board with cables see I/O Board Sets
I/O BOARD FOR 16E1 WITH SMZ (BT43) CONNECTORS PART NO.: NEC-IOB-32M-SMZ
1.4
Specification • Capacity: 48E1
• SMB male connectors (96pcs)
• 1U high
• 19” rack compatible
• 6xDSUB37 plug connectors on the rear
• RoHS compliant
Cable Accessories• MDR68-2xDSUB37 interconnection cable
(NEC-TRCB-M68-STD; 3pcs)
• for ordering I/O Board with cables see I/O Board Sets
I/O BOARD FOR 48E1 WITH SMB CONNECTORS PART NO.: NEC-IOB-96M-SMB
A. Indoor Accessories (GP series)
1.5
1. I/O BOARDS
Specification • Capacity: 32E1
• SMB male connectors (64pcs)
• 1U high
• 19” rack compatible
• 4xDSUB37 plug connectors on the rear
• RoHS compliant
Cable Accessories• MDR68-2xDSUB37 interconnection cable
(NEC-TRCB-M68-STD; 2pcs)
• for ordering I/O Board with cables see I/O Board Sets
Page 3
I/O BOARD FOR 32E1 WITH SMB CONNECTORS PART NO.: NEC-IOB-64M-SMB
1.6
Specification • Capacity: 16E1
• SMB male connectors (32pcs)
• 1/2U high
• 19” rack compatible
• 2xDSUB37 plug connectors on the rear
• RoHS compliant
Cable Accessories• DSUB37-DSUB37 interconnection cable
(NEC-TRCB-D37-SCRW; 2pcs)
or
• MDR68-2xDSUB37 interconnection cable (NEC-TRCB-
M68-STD)
• for ordering I/O Board with cables see I/O Board Sets
I/O BOARD FOR 16E1 WITH SMB CONNECTORS PART NO.: NEC-IOB-32M-SMB
1.7
Specification • Capacity: 48E1
• 1.0/2.3 socket connectors (96pcs)
• 1U high
• 19” rack compatible
• 6xDSUB37 plug connectors on the rear
• RoHS compliant
Cable Accessories• MDR68-2xDSUB37 interconnection cable
(NEC-TRCB-M68-STD; 3pcs)
• for ordering I/O Board with cables see I/O Board Sets
I/O BOARD FOR 48E1 WITH 1.0/2.3 CONNECTORS PART NO.: NEC-IOB-96M-1023
1.8
Specification • Capacity: 16E1
• 1.0/2.3 socket connectors (32pcs)
• 1/2U high
• 19” rack compatible
• 2xDSUB37 plug connectors on the rear
• RoHS compliant
Cable Accessories• DSUB37-DSUB37 interconnection cable
(NEC-TRCB-D37-SCRW; 2pcs)
or
• MDR68-2xDSUB37 interconnection cable
(NEC-TRCB-M68-STD)
• for ordering I/O Board with cables see I/O Board Sets
I/O BOARD FOR 16E1 WITH 1.0/2.3 CONNECTORS PART NO.: NEC-IOB-32M-1023
A. Indoor Accessories (GP series)
1.9
1. I/O BOARDS
Specification • Capacity: 48E1
• 6xDSUB37 cut-outs
• 1/2U high
• 19” rack compatible
• RoHS compliant
Cable Accessories
• MDR68-2xDSUB37 interconnection cable
(NEC-TRCB-M68-STD; 3pcs)
• for ordering I/O Board with cables see I/O Board Sets
Page 4
1.10
Specification • Capacity: 48E1
• RJ45 socket connectors (48pcs)
• 1U high
• 19” rack compatible
• 6xDSUB37 plug connectors on the rear
• RoHS compliant
Cable Accessories• MDR68-2xDSUB37 interconnection cable
(NEC-TRCB-M68-STD; 3pcs)
• for ordering I/O Board with cables see I/O Board Sets
I/O BOARD FOR 48E1 WITH RJ45 CONNECTORS PART NO.: NEC-IOB-96M-RJ45
1.11
Specification • Capacity: 32E1
• RJ45 socket connectors (32pcs)
• 1U high
• 19” rack compatible
• 4xDSUB37 plug connectors on the rear
• RoHS compliant
Cable Accessories• MDR68-2xDSUB37 interconnection cable
(NEC-TRCB-M68-STD; 2pcs)
• for ordering I/O Board with cables see I/O Board Sets
I/O BOARD FOR 32E1 WITH RJ45 CONNECTORS PART NO.: NEC-IOB-64M-RJ45
1.12
Specification • Capacity: 24E1
• RJ45 socket connectors (24pcs)
• 1U high
• 19” rack compatible
• 3xDSUB37 plug connectors on the rear
• RoHS compliant
Cable Accessories• MDR68-2xDSUB37 interconnection cable
(NEC-TRCB-M68-STD; 1pc)
• MDR68-1xDSUB37 interconnection cable
(NEC-TRCB-M68/2-STD; 1pc)
• for ordering I/O Board with cables see I/O Board Sets
I/O BOARD FOR 24E1 WITH RJ45 CONNECTORS PART NO.: NEC-IOB-48M-RJ45
I/O BOARD FOR 48E1 WITH D-SUB37 CONNECTORS PART NO.: NEC-IOB-96M-DSUB(FIXING FRAME FOR MDR-DSUB INTERCONNECTION CABLES)
A. Indoor Accessories (GP series)
1.13
1. I/O BOARDS
Specification • Capacity: 16E1
• RJ45 socket connectors (16pcs)
• 1/2U high
• 19” rack compatible
• 2xDSUB37 plug connectors on the rear
• RoHS compliant
Cable Accessories• DSUB37-DSUB37 interconnection cable
(NEC-TRCB-D37-SCRW; 2pcs)
or
• MDR68-2xDSUB37 interconnection cable
(NEC-TRCB-M68-STD)
• for ordering I/O Board with cables see I/O Board Sets
Page 5
I/O BOARD FOR 16E1 WITH RJ45 CONNECTORS PART NO.: NEC-IOB-32M-RJ45
1.14
Specification • Capacity: 4E1
• BNC socket connectors (8pcs)
• 1/2U high
• 19” rack compatible
• 1xDSUB37 plug connectors on the rear
• RoHS compliant
Cable Accessories
• DSUB37-DSUB37 interconnection cable
(NEC-TRCB-D37-SCRW; 1pc)
• for ordering I/O Board with cables see I/O Board Sets
I/O BOARD FOR 4E1 WITH BNC CONNECTORS PART NO.: NEC-IOB-8M-BNC
1.15
Specification • capacity: 4E1
• 1.6/5.6 socket connectors (8pcs)
• 1/2U high
• 19” rack compatible
• 1xDSUB37 plug connectors on the rear
• RoHS compliant
Cable Accessories• DSUB37-DSUB37 interconnection cable
(NEC-TRCB-D37-SCRW; 1pc)
• for ordering I/O Board with cables see I/O Board Sets
I/O BOARD FOR 4E1 WITH 1.6/5.6 CONNECTORS PART NO.: NEC-IOB-8M-1656
1.16
Specification • Capacity: 40E1
• SMB male connectors (80pcs)
• 1U high
• 19” rack compatible
• 5xDSUB37 plug connectors on the rear
• RoHS compliant
Cable Accessories
• MDR68-2xDSUB37 interconnection cable
(NEC-TRCB-M68-STD; 2pcs)
• MDR36-DSUB37 interconnection cable
(NEC-TRCB-M36-SCRW; 1pc)
• for ordering I/O Board with cables see I/O Board Sets
I/O BOARD FOR 40E1 WITH SMB CONNECTORS PART NO.: NEC-IOB-80M-SMB
A. Indoor Accessories (GP series)
1.17
1. I/O BOARDS
Specification • Capacity: 40E1
• 1.0/2.3 socket connectors (80pcs)
• 1U high
• 19” rack compatible
• 5xDSUB37 plug connectors on the rear
• RoHS compliant
Cable Accessories• MDR68-2xDSUB37 interconnection cable
(NEC-TRCB-M68-STD; 2pcs)
• MDR36-DSUB37 interconnection cable
(NEC-TRCB-M36-SCRW; 1pc)
• for ordering I/O Board with cables see I/O Board Sets
Page 6
I/O BOARD FOR 40E1 WITH 1.0/2.3 CONNECTORS PART NO.: NEC-IOB-80M-1023
1.18
Specification • Capacity: 40E1
• 5xDSUB37 cut-outs
• 1/2U high
• 19” rack compatible
• RoHS compliant
Cable Accessories• MDR68-2xDSUB37 interconnection cable
(NEC-TRCB-M68-STD; 2pcs)
• MDR36-DSUB37 interconnection cable
(NEC-TRCB-M36-STMP; 1pc)
• for ordering I/O Board with cables see I/O Board Sets
I/O BOARD FOR 40E1 WITH D-SUB37 CONNECTORS PART NO.: NEC-IOB-80M-DSUB(FIXING FRAME FOR MDR-DSUB INTERCONNECTION CABLES)
1.19
Specification • Capacity: 40E1
• RJ45 socket connectors (40pcs)
• 1U high
• 19” rack compatible
• 5xDSUB37 plug connectors on the rear
• RoHS compliantr
Cable Accessories
• MDR68-2xDSUB37 interconnection cable
(NEC-TRCB-M68-STD; 2pcs)
• MDR36-DSUB37 interconnection cable
(NEC-TRCB-M36-SCRW; 1pc)
• for ordering I/O Board with cables see I/O Board Sets
I/O BOARD FOR 40E1 WITH RJ45 CONNECTORS PART NO.: NEC-IOB-80M-RJ45
2.3
Specification
• For connecting I/O Board to IDU
(PASOLINK Mx – 8E1 INTFC)
• Capacity: 8E1
• Connectors: MDR36 plug (IDU side), DSUB37
socket (I/O Board side)
• DSUB37 socket with locking screws
• 1m (standard length)
• RoHS compliant
MDR36-DSUB37 INTERCONNECTION CABLE FOR 8E1 PART NO.: NEC-TRCB-M36-SCRWSCRW (SCREW) TYPE
2.4
Specification
• Used with DSUB I/O Board
(for PASOLINK Mx – 8E1 INTFC)
• Capacity: 8E1
• Connectors: MDR36 plug (IDU side),
DSUB37 socket (I/O Board side)
• DSUB37 socket with stumps
• 1m (standard length)
• RoHS compliant
MDR36-DSUB37 INTERCONNECTION CABLE FOR 8E1 PART NO.: NEC-TRCB-M36-STMPSTMP (STUMP) TYPE
A. Indoor Accessories (GP series)2. CABLE ASSEMBLIES
Page 7
2.2
Specification
• For connecting I/O Board to IDU (e.g. PASOLINK NEO – 48E1 INTFC)
• Capacity: 16E1
• Connectors: MDR68 plug (IDU side), 2xDSUB37 socket (I/O Board side)
• DSUB37 socket with locking screws/stumps
• 1m (standard length)
• RoHS compliant
MDR68-2XDSUB37 INTERCONNECTION CABLE FOR 16E1 PART NO.: NEC-TRCB-M68-STD
2.1
Specification
• For connecting I/O Board to IDU (e.g. PASOLINK NEO - 16E1 INTFC)
• Capacity: 8E1
• Connectors: DSUB37 plug (IDU side), DSUB37 socket (I/O Board side)
• DSUB37 socket with locking screws
• 1m (standard length)
• RoHS compliant
DSUB37-DSUB37 INTERCONNECTION CABLE FOR 8E1 PART NO.: NEC-TRCB-D37-SCRW
A. Indoor Accessories (GP series)2. CABLE ASSEMBLIES
Page 8
2.7
Specification
• Used with DSUB I/O Board
• Alcatel pin layout on DSUB37 according to customer request
• Capacity: 16E1
• Connectors: MDR68 plug (IDU side), 2xDSUB37 socket (I/O Board side)
• DSUB37 socket with stumps
• 2m
• RoHS compliant
MDR68-2XDSUB37 INTERCONNECTION CABLE FOR 16E1 PART NO.: NEC-TRCB-M68-ALC-22M, ALC (ALCATEL) TYPE
2.6
Specification
• Used with DSUB I/O Board
• Alcatel pin layout on DSUB37 according to customer request
• Capacity: 16E1
• Connectors: MDR68 plug (IDU side), 2xDSUB37 socket (I/O Board side)
• DSUB37 socket with stumps
• 1m (standard length)
• RoHS compliant
MDR68-2XDSUB37 INTERCONNECTION CABLE FOR 16E1 PART NO.: NEC-TRCB-M68-ALCALC (ALCATEL) TYPE
2.5
Specification
• For connecting I/O Board to IDU
(e.g. PASOLINK NEO – 32E1 INTFC; for the upper 8E1 in 20x2M mode)
• Capacity: 8E1
• Connectors: MDR68 plug (IDU side), DSUB37 socket (I/O Board side)
• DSUB37 socket with locking screws/stumps
• 1m (standard length)
• RoHS compliant
MDR68-DSUB37 INTERCONNECTION CABLE FOR 8E1 PART NO.: NEC-TRCB-M68/2-STD
2.8
Specification
• For Back to Back connections
• Capacity: 16E1
• Connectors: 2xMDR68 plug
• 0.5m (standard length)
• RoHS compliant
MDR68-MDR68 BACK TO BACK CABLE - 0.5M PART NO.: NEC-TRCB-M68-X-M68-0,5
A. Indoor Accessories (GP series)
2.9
2. CABLE ASSEMBLIES
Specification
• For IDU to DDF connections
• Capacity: 4E1
• Cable: 8 cores coaxial
• Connectors: DSUB37 plug
• Last digit defines the length
• RoHS compliant
Page 9
DSUB37– 8 CORES COAX – OPEN END CABLE FOR 4E1 PART NO.: NEC-TRCB-D37-8C-2
2.10
Specification
• For IDU to DDF connections
• Capacity: 4E1
• Cable: 8 cores coaxial
• Connectors: DSUB37 plug, 8x1.6/5.6 socket
• Last digit defines the length
• RoHS compliant
DSUB37– 8 CORES COAX – 8X1.6/5.6 CABLE FOR 4E1 PART NO.: NEC-TRCB-D37-8C-1656-2
2.12
Specification
• For IDU to DDF connections
• Capacity: 8E1
• Cable: 16 cores coaxial
• Connectors: DSUB37 plug, 16x1.6/5.6 socket
• Last digit defines the length
• RoHS compliant
DSUB37– 16 CORES COAX – 16X1.6/5.6 CABLE FOR 8E1 PART NO.: NEC-TRCB-D37-16C-1656-2
2.11
Specification
• For IDU to DDF connections
• Capacity: 8E1
• Cable: 16 cores coaxial
• Connectors: DSUB37 plug
• Last digit defines the length
• RoHS compliant
DSUB37– 16 CORES COAX – OPEN END CABLE FOR 8E1 PART NO.: NEC-TRCB-D37-16C-2
A. Indoor Accessories (GP series) 2. CABLE ASSEMBLIES
Page 10
2.15
Specification
• For IF interconnection
• Cable assembly: TNC right angle plug, N straight plug – 2m
• Adaptor: N socket – N socket
• IF fixing frame with 10 positions
• RoHS compliant
N-TNC IF JUMPER CABLE + N-N ADAPTER + IF FIXING FRAME PART NO.: NEC-JCBSET-N2-2
2.14
Specification
• For IF interconnection
• Cable assembly: TNC right angle plug, N straight plug – 2m
• Adaptor: N socket – N socket
• RoHS compliant
N-TNC IF JUMPER CABLE + N-N ADAPTER PART NO.: NEC-JCBSET-N1-2
2.13
Specification
• For IDU to DDF connections
• Capacity: 8E1
• Cable: 16 twisted pair (0,4mm solid wire)
• Connectors: DSUB37 plug
• Last digit defines the length
• RoHS compliant
DSUB37– 16 TWISTED PAIR – OPEN END CABLE FOR 8E1 PART NO.: NEC-TRCB-D37-16TP-5
2.16
Specification
• For PASOLINK NEO XPIC cabling
• CTRL cable assembly: 2xDSUB15HD plug (1pc)
• XIF cable assembly: 2x1.0/2.3 plug auto locking type (2pcs)
• 0,4m (standard length)
• RoHS compliant
NEO XPIC CABLE SET (1+0) PART NO.: NEC-XCBSET-NEO(1+0)-0,4
A. Indoor Accessories (GP series)2. CABLE ASSEMBLIES
Page 11
2.17
Specification
• For power cabling of PASOLINK family
• Mini-Fit 4,2mm 4P connector
• MT 2x0,75mm2 power cable
• 5,10m standard lengths
• RoHS compliant
10M POWER CABLE WITH MOLEX CONNECTOR PART NO.: NEC-PWCB-MOLEX-2X0,75-10
A. Indoor Accessories (GP series)3. I/O BOARD SETS
Page 12
3.1
1.) I/O Board Set for 16E1 with BNC connectors Part No.: NEC-IOBSET-N16-32M-BNC (Refer to item 1.1 & 2.1)
Includes: 1pc NEC-IOB-32M-BNC
2pcs NEC-TRCB-D37-SCRW
2.) I/O Board Set for 16E1 with 1.6/5.6 connectors Part No.: NEC-IOBSET-N16-32M-1656 (Refer to item 1.2 & 2.1)
Includes: 1pc NEC-IOB-32M-1656
2pcs NEC-TRCB-D37-SCRW
3.) I/O Board Set for 16E1 with SMZ connectors Part No.: NEC-IOBSET-N16-32M-SMZ (Refer to item 1.3 & 2.1)
Includes: 1pc NEC-IOB-32M-SMZ
2pcs NEC-TRCB-D37-SCRW
4.) I/O Board Set for 16E1 with SMB connectors Part No.: NEC-IOBSET-N16-32M-SMB (Refer to item 1.6 & 2.1)
Includes: 1pc NEC-IOB-32M-SMB
2pcs NEC-TRCB-D37-SCRW
5.) I/O Board Set for 16E1 with 1.0/2.3 connectors Part No.: NEC-IOBSET-N16-32M-1023 (Refer to item 1.8 & 2.1)
Includes: 1pc NEC-IOB-32M-1023
2pcs NEC-TRCB-D37-SCRW
6.) I/O Board Set for 16E1 with RJ45 connectors Part No.: NEC-IOBSET-N16-32M-RJ45 (Refer to item 1.13 & 2.1)
Includes: 1pc NEC-IOB-32M-RJ45
2pcs NEC-TRCB-D37-SCRW
PASOLINK NEO – PDH 16E1 INTERFACE (OR PASOLINK V4 – 16E1)
3.2
1.) I/O Board Set for 48E1 with BNC connectors Part No.:NEC-IOBSET-N48-3x32M-BNC (Refer to item 1.1 & 2.2)Includes: 3pcs NEC-IOB-32M-BNC
3pcs NEC-TRCB-M68-STD2.) I/O Board Set for 48E1 with 1.6/5.6 connectors Part No.:NEC-IOBSET-N48-3x32M-1656 (Refer to item 1.2 & 2.2)
Includes: 3pcs NEC-IOB-32M-16563pcs NEC-TRCB-M68-STD
3.) I/O Board Set for 48E1 with SMZ connectors Part No.:NEC-IOBSET-N48-3x32M-SMZ (Refer to item 1.3 & 2.2)Includes: 3pcs NEC-IOB-32M-SMZ
3pcs NEC-TRCB-M68-STD4.) I/O Board Set for 48E1 with SMB connectors Part No.:NEC-IOBSET-N48-96M-SMB (Refer to item 1.4 & 2.2)
Includes: 1pc NEC-IOB-96M-SMB3pcs NEC-TRCB-M68-STD
5.) I/O Board Set for 48E1 with 1.0/2.3 connectors Part No.:NEC-IOBSET-N48-96M-1023 (Refer to item 1.7 & 2.2)Includes: 1pc NEC-IOB-96M-1023
3pcs NEC-TRCB-M68-STD6.) I/O Board Set for 48E1 with DSUB connectors Part No.:NEC-IOBSET-N48-96M-DSUB (Refer to item 1.9 & 2.2)
Includes: 1pc NEC-IOB-96M-DSUB3pcs NEC-TRCB-M68-STD
7.) I/O Board Set for 48E1 with RJ45 connectors Part No.:NEC-IOBSET-N48-96M-RJ45 (Refer to item 1.10 & 2.2)Includes: 1pc NEC-IOB-96M-RJ45
3pcs NEC-TRCB-M68-STD
PASOLINK NEO – PDH 48E1 INTERFACE
3.3
1.) I/O Board Set for 32E1 with BNC connectors Part No.:NEC-IOBSET-N48-2x32M-BNC (Refer to item 1.1 & 2.2)Includes: 2pcs NEC-IOB-32M-BNC
2pcs NEC-TRCB-M68-STD2.) I/O Board Set for 32E1 with 1.6/5.6 connectors Part No.:NEC-IOBSET-N48-2x32M-1656 (Refer to item 1.2 & 2.2)
Includes: 2pcs NEC-IOB-32M-16562pcs NEC-TRCB-M68-STD
3.) I/O Board Set for 32E1 with SMZ connectors Part No.:NEC-IOBSET-N48-2x32M-SMZ (Refer to item 1.3 & 2.2)Includes: 2pcs NEC-IOB-32M-SMZ
2pcs NEC-TRCB-M68-STD4.) I/O Board Set for 32E1 with SMB connectors Part No.:NEC-IOBSET-N48-64M-SMB (Refer to item 1.5 & 2.2)
Includes: 1pc NEC-IOB-64M-SMB2pcs NEC-TRCB-M68-STD
5.) I/O Board Set for 32E1 with DSUB connectors Part No.:NEC-IOBSET-N48-64M-DSUB (Refer to item 1.9 & 2.2)Includes: 1pc NEC-IOB-96M-DSUB
2pcs NEC-TRCB-M68-STD6.) I/O Board Set for 32E1 with RJ45 connectors Part No.:NEC-IOBSET-N48-64M-RJ45 (Refer to item 1.11 & 2.2)
Includes: 1pc NEC-IOB-64M-RJ452pcs NEC-TRCB-M68-STD
7.) I/O Board Set for 24E1 with RJ45 connectors Part No.:NEC-IOBSET-N48-48M-RJ45 (Refer to item 1.12&2.2&2.5)Includes: 1pc NEC-IOB-48M-RJ45
1pc NEC-TRCB-M68-STD1pc NEC-TRCB-M68/2-STD
PASOLINK NEO – PDH 32E1 INTERFACE
A. Indoor Accessories (GP series)3. I/O BOARD SETS
Page 13
3.4
1.) I/O Board Set for 16E1 with BNC connectors Part No.:NEC-IOBSET-N48-32M-BNC (Refer to item 1.1 & 2.2)
Includes: 1pc NEC-IOB-32M-BNC
1pc NEC-TRCB-M68-STD
2.) I/O Board Set for 16E1 with 1.6/5.6 connectors Part No.:NEC-IOBSET-N48-32M-1656 (Refer to item 1.2 & 2.2)
Includes: 1pc NEC-IOB-32M-1656
1pc NEC-TRCB-M68-STD
3.) I/O Board Set for 16E1 with SMZ connectors Part No.:NEC-IOBSET-N48-32M-SMZ (Refer to item 1.3 & 2.2)
Includes: 1pc NEC-IOB-32M-SMZ
1pc NEC-TRCB-M68-STD
4.) I/O Board Set for 16E1 with SMB connectors Part No.:NEC-IOBSET-N48-32M-SMB (Refer to item 1.6 & 2.2)
Includes: 1pc NEC-IOB-32M-SMB
1pc NEC-TRCB-M68-STD
5.) I/O Board Set for 16E1 with RJ45 connectors Part No.:NEC-IOBSET-N48-32M-RJ45 (Refer to item 1.13 & 2.2)
Includes: 1pc NEC-IOB-32M-RJ45
1pc NEC-TRCB-M68-STD
PASOLINK NEO – PDH 32E1 INTERFACE, UPTO 16E1 CAPACITY
3.5
1.) I/O Board Set for 40E1 with SMB connectors Part No.:NEC-IOBSET-80M-SMB (Refer to item 1.16 & 2.2 & 2.3)
Includes: 1pc NEC-IOB-80M-SMB
2pcs NEC-TRCB-M68-STD
1pc NEC-TRCB-M36-SCRW
2.) I/O Board Set for 40E1 with 1.0/2.3 connectors Part No.:NEC-IOBSET-80M-1023 (Refer to item1.17 & 2.2 & 2.3)
Includes: 1pc NEC-IOB-80M-1023
2pcs NEC-TRCB-M68-STD
1pc NEC-TRCB-M36-SCRW
3.) I/O Board Set for 40E1 with DSUB connectors Part No.:NEC-IOBSET-80M-DSUB (Refer to item 1.18 & 2.2 & 2.4)
Includes: 1pc NEC-IOB-80M-DSUB
2pcs NEC-TRCB-M68-STD
1pc NEC-TRCB-M36-STMP
4.) I/O Board Set for 40E1 with RJ45 connectors Part No.:NEC-IOBSET-80M-RJ45 (Refer to item 1.19 & 2.2 & 2.3)
Includes: 1pc NEC-IOB-80M-RJ45
2pcs NEC-TRCB-M68-STD
1pc NEC-TRCB-M36-SCRW
PASOLINK MX – PDH 40E1 (32E1 INTERFACE + 8E1 INTERFACE)
3.6
1.) I/O Board Set for 4E1 with BNC connectors Part No.:NEC-IOBSET-8M-BNC (Refer to item 1.14 & 2.1)
Includes: 1pc NEC-IOB-8M-BNC
1pc NEC-TRCB-D37-SCRW
2.) I/O Board Set for 4E1 with 1.6/5.6 connectors Part No.:NEC-IOBSET-8M-1656 (Refer to item 1.15 & 2.1)
Includes: 1pc NEC-IOB-8M-1656
1pc NEC-TRCB-D37-SCRW
PASOLINK NEO – 4E1 (4PORT LAN INTERFACE)
3.7 OTHER I/O BOARD SETS ARE AVAILABLE PLEASE CONTACT NEC EUROPE LTD
A. Indoor Accessories (GP series)
Page 14
D-SUB 1 D-SUB 2 D-SUB 3 D-SUB 4 D-SUB 5 D-SUB 6 DSUB37 socket
CH1-8 CH9-16 CH17-24 CH25-32 CH33-40 CH41-48 pin:+ 1
- 2
+ 3- 4
+ 6
- 7+ 8
- 9
+ 11- 12
+ 13
- 14+ 16
- 17
+ 18
- 19+ 20
- 21
+ 22- 23
+ 25
- 26+ 27
- 28
+ 29- 30
+ 31
- 32
+ 34- 35
+ 36
- 375
CH44
CH43
CH42
CH41
CH48
CH47
CH46
CH45
CH44
CH43
CH42
CH41
CH48
CH47
CH46
CH45
CH33
CH37
CH36
CH35
CH34
CH33
CH40
CH39
CH38
CH27
CH26
CH25
CH40
CH39
CH38
CH37
CH36
CH35
CH34
CH31
CH30
CH29
CH28
CH17
CH32
CH31
CH30
CH29
CH28
CH27
CH26
CH25
CH32
CH17
CH24
CH23
CH22
CH21
CH24
IN
IN
IN
IN
IN
IN
CH20
CH19
CH18
OUT
CH13
CH12
IN
CH23
CH22
CH21
CH20
CH19
CH18
PASOLINK
Traffic
Channels
CH8
OUT
OUT
OUT
OUT
OUT
IN
OUT
OUT
CH16
CH7 CH15
CH14CH6
CH5
CH4
CH3
CH2
CH1
CH8
CH7
CH6
CH9
CH16
CH15
CH14
CH13
CH12
CH11
CH10
CH5
ground
CH1 CH9
CH3 CH11
CH2 CH10
CH4
4.1
PIN LAYOUT OF DSUB37 SOCKET CONNECTORS ON MDR-DSUB CABLES
4.2
Cable Types • MDR68-2xDSUB37 interconnection
cables (STD, SCRW, STMP types)
• MDR68-DSUB37 interconnection
cable (STD type)
• MDR36-DSUB37 interconnection
cables (SCRW,STMP types)
Specification • Pin layout is equal to PASOLINK
DSUB37 traffic connectors
(PASOLINK V4, PASOLINK
NEO-16E1 INTFC, etc.)
Specification • an RJ45 connector corresponds
to an E1 channel IN and OUT
I/O Boards with RJ45 connectors
NEC-IOB-96M-RJ45
NEC-IOB-64M-RJ45
NEC-IOB-48M-RJ45
NEC-IOB-32M-RJ45
NEC-IOB-80M-RJ45
PIN LAYOUT OF RJ45 SOCKET CONNECTORS ON RJ45 I/O BOARDS
pin:
+ 1
- 2
+ 4
- 5
RJ45
OUT
IN
CH
4. PIN LAYOUT
B. RF Accessories (IS Series)1. OMT (ORTHO MODE TRANSDUCER)
Page 15
1.3
OMT FOR 11-38GHZ (GENERALLY)
1.1
1.2
Ortho Mode Transducer for Andrew, Grante or RFS antenna
for frequency range of 11, 13, 15, 18, 23, 26, 28, 32, 38GHz.
In case of orders, the antenna type always has to be specified.
• Interface at ODU side: 2xNEC flange
• Interface at Antenna side: interface for dual polarized Andrew(A), Grante(G) or RFS(R)
• Content of the ordering code:
OMT-”frequency band”-2NEC-”Antenna manufacturer”
• Example code: OMT-180-2NEC-R
OMT FOR 11-38GH2 PART NO.: OMT-110…380-2NEC-A(G)(R)
ORTHO MODE TRANSDUCERS
Figure
B. RF Accessories (IS Series)2. HYBRID FOR 2 ODUs
Page 16
2.2
Integrated Single Polarized Symmetrical (3dB) or Asymmetrical (6 or 10dB)
Single Band Hybrid for Frequency Range of 6-L GHz (5.925-6.425GHz)
• Interfaces at ODU side: 2xN male
• Coupling rate: 3, 6 or 10dB
• Interface at antenna side: PDR70, UDR70, PBR70, UBR70 or other customer request
• Material of the Waveguide flange: (A) - Aluminium or (B) Brass
• Content of the ordering code:
ISH-59-2N-"coupling rate"-"waveguide flange"- "material of the WG flange"
• Example code: ISH-59-2N-3-UDR70-B
ISH 6/7/8 GHZ HYBRIDS FOR 2 ODUs PART NO.: ISH-59-2N-3(6)(10)-P(U)D(B)R70-A(B)
2.3
Integrated Single Polarized Symmetrical (3dB) or Asymmetrical (6 or 10dB)
Single Band Hybrid for Frequency Range of 6-U GHz (6.425-7.125GHz)
• Interfaces at ODU side: 2xN male
• Coupling rate: 3, 6 or 10dB
• Interface at antenna side: PDR70, UDR70, PBR70, UBR70 or other customer request
• Material of the Waveguide flange: Aluminium (A) or Brass (B)
• Content of the ordering code:
ISH-64-2N-"coupling rate"-"waveguide flange"-"material of the WG flange"
• Example code: ISH-64-2N-3-UDR70-B
ISH 6/7/8 GHZ HYBRIDS FOR 2 ODUs PART NO.: ISH-64-2N-3(6)(10)-P(U)D(B)R70-A(B)
2.1
HYBRIDS FOR 2 ODUs
B. RF Accessories (IS Series)2. HYBRID FOR 2 ODUs
Page 17
2.6
Integrated Single Polarized Symmetrical (3dB) or Asymmetrical (6
or 10dB) Dual Band Hybrid for Frequency Range of 7-8 GHz
(7.125-8.5GHz)
• Interfaces at ODU side: 2xN male
• Coupling rate: 3, 6 or 10dB
• Interface at antenna side: PDR84, UDR84, PBR84, UBR84
or other customer request
• Material of the Waveguide flange: Aluminium(A) or Brass(B)
• Content of the ordering code:
ISH-71-85-2N-"coupling rate"-"waveguide flange"-"material
of the WG flange"
• Example code: ISH-71-85-2N-10-UDR84-B
ISH 6/7/8 GHZ HYBRIDS FOR 2 ODUs PART NO.: ISH-71-85-2N-3(6)(10)-P(U)D(B)R84-A(B)
2.5
Integrated Single Polarized Symmetrical (3dB) or Asymmetrical (6
or 10dB) Single Band Hybrid for Frequency Range of
7 GHz (7.125-7.750GHz)
• Interfaces at ODU side: 2xN male
• Coupling rate: 3, 6 or 10dB
• Interface at antenna side: PDR84, UDR84, PBR84, UBR84 or other cus-
tomer request
• Material of the Waveguide flange: Aluminium(A) or Brass(B)
• Content of the ordering code:
ISH-71-2N-"coupling rate"-"waveguide flange"-"material of the WG flange"
• Example code: ISH-71-2N-3-UDR84-A
ISH 6/7/8 GHZ HYBRIDS FOR 2 ODUs PART NO.: ISH-71-2N-3(6)(10)-P(U)D(B)R84-A(B)
2.4
Integrated Single Polarized Symmetrical (3dB) or Asymmetrical
(6 or 10dB) Dual Band Hybrid for Frequency Range of
6-W GHz (5.925-7.125GHz)
• Interfaces at ODU side: 2xN male
• Coupling rate: 3, 6 or 10dB
• Interface at antenna side: PDR70, UDR70, PBR70, UBR70 or
other customer request
• Material of the Waveguide flange: Aluminium(A) or Brass(B)
• Content of the ordering code:
ISH-59-71-2N-"coupling rate"-"waveguide flange"-"material of
the WG flange"
• Example code: ISH-59-71-2N-3-UDR70-B
ISH 6/7/8 GHZ HYBRIDS FOR 2 ODUs PART NO.: ISH-59-71-2N-3(6)(10)-P(U)D(B)R70-A(B)
2.7
Integrated Single Polarized Symmetrical (3dB) or Asymmetrical (6
or 10dB) Single Band Hybrid for Frequency Range of
8 GHz (7.750-8.5GHz)
• Interfaces at ODU side: 2xN male
• Coupling rate: 3, 6 or 10dB
• Interface at antenna side: PDR84, UDR84, PBR84, UBR84
or other customer request
• Material of the Waveguide flange: Aluminium(A) or Brass(B)
• Content of the ordering code:
ISH-77-2N-"coupling rate"-"waveguide flange"-"material of the WG flange"
• Example code: ISH-77-2N-3-UDR84-A
ISH 6/7/8 GHZ HYBRIDS FOR 2 ODUs PART NO.: ISH-77-2N-3(6)(10)-P(U)D(B)R84-A(B)
B. RF Accessories (IS Series)2. HYBRID FOR 2 ODUs
Page 18
2.10
Integrated Single Polarized Symmetrical (3dB) or Asymmetrical (6
or 10dB) Dual Band Hybrid for Frequency Range of
18-23 GHz (17.7-23.6GHz)
• Interfaces at ODU and antenna side: NEC flange
• Coupling rate: 3, 6 or 10dB
• Content of the ordering code:
ISH-180-230-2NEC-"coupling rate"
• Example code: ISH-180-230-2NEC-3
ISH 11-38 GHZ HYBRIDS FOR 2 ODUs PART NO.: ISH-180-230-2NEC-3(6)(10)
2.9
Integrated Single Polarized Symmetrical (3dB) or Asymmetrical (6
or 10dB) Dual Band Hybrid for Frequency Range
of 13-15 GHz (12.75-15.35GHz)
• Interfaces at ODU and antenna side: NEC flange
• Coupling rate: 3, 6 or 10dB
• Content of the ordering code:
ISH-130-150-2NEC-"coupling rate"
• Example code: ISH-130-150-2NEC-3
ISH 11-38 GHZ HYBRIDS FOR 2 ODUs PART NO.: ISH-130-150-2NEC-3(6)(10)
2.8
Integrated Single Polarized Symmetrical (3dB) or Asymmetrical (6
or 10dB) Single Band Hybrid for Frequency Range of
11, 13, 15, 18, 23, 26, 28, 32, 38 GHz
• Interfaces at ODU and antenna side: NEC flange
• Coupling rate: 3, 6 or 10dB
• Content of the ordering code:
ISH-"frequency band"-2NEC-"coupling rate"
• Example code: ISH-110-2NEC-3
ISH 11-38 GHZ HYBRIDS FOR 2 ODUs PART NO.: ISH-110…380-2NEC-3(6)(10)
2.11
Integrated Single Polarized Symmetrical (3dB) or Asymmetrical (6
or 10dB) Single Band Hybrid for Frequency Range of
32-28 GHz (31.8-39.5GHz)
• Interfaces at ODU and antenna side: NEC flange
• Coupling rate: 3, 6 or 10dB
• Content of the ordering code:
ISH-320-380-2NEC-"coupling rate"
• Example code: ISH-320-380-2NEC-3
ISH 11-38 GHZ HYBRIDS FOR 2 ODUs PART NO.: ISH-320-380-2NEC-3(6)(10)
B. RF Accessories (IS Series)2. HYBRID FOR 2 ODUs
Page 19
2.14
Separated Single Polarized Symmetrical (3dB) or Asymmetrical (6 or10dB) Dual Band Hybrid for Frequency Range of 18-23GHz (17.7-23.6GHz)
• Interface at ODU side: 2xNEC flange
• Interface at antenna side: PDR220, UDR220, PBR220 or UBR220
or other customer request
• Material of the waveguide flange: Aluminium(A) or Brass(B)
• Content of the ordering code:
SSH-180-230-2NEC-"coupling rate"- "WG flange type"-"material
of the WG flange"
• Example code: SSH-180-230-2NEC-3-PDR220-A
SSH 11-38 GHZ HYBRIDS FOR 2 ODUs PART NO.: SSH-180-230-2NEC-3(6)(10)-P(U)D(B)R220-A(B)
2.13
Separated Single Polarized Symmetrical (3dB) or Asymmetrical (6 or10dB) Dual Band Hybrid for Frequency Range of 13-15GHz (12.75-15.35GHz)
• Interface at ODU side: 2xNEC flange
• Interface at antenna side: PDR140, UDR140, PBR140 or UBR140 or
other customer request
• Material of the waveguide flange: Aluminium(A) or Brass(B)
• Content of the ordering code:
SSH-130-150-2NEC-"coupling rate"- "WG flange type"-"material
of the WG flange"
• Example code: SSH-130-150-2NEC-3-PDR140-A
SSH 11-38 GHZ HYBRIDS FOR 2 ODUs PART NO.: SSH-130-150-2NEC-3(6)(10)-P(U)D(B)R140-A(B)
2.12
Separated Single Polarized Symmetrical (3dB) or Asymmetrical (6 or10dB) Single Band Hybrid for Frequency Range of 11, 13, 15, 18, 23, 26, 28, 32 and 38GHz
• Interface at ODU side: 2xNEC flange
• Interface at antenna side:
- 11GHz: PDR100, UDR100, PBR100 or UBR100 or other customer request
- 11 and 13GHz: PDR120, UDR120, PBR120 or UBR120 or other customer request
- 13 and 15GHz: PDR140, UDR140, PBR140 or UBR140 or other customer request
- 18, 23 and 26GHz: PDR220, UDR220, PBR220 or UBR220 or other customer request
- 26GHz: PDR260, UDR260, PBR260 or UBR260 or other customer request
- 28, 32 and 38GHz: PDR320, UDR320, PBR320 or UBR320 or other customer request
• Material of the waveguide flange: Aluminium(A) or Brass(B)
• Content of the ordering code:
SSH-"frequency band"-2NEC-"coupling rate"- "WG flange type"- material of the WG flange"
• Example code: SSH-110-2NEC-3-PDR100-A
SSH 11-38 GHZ HYBRIDS FOR 2 ODUs PART NO.: SSH-110...380-2NEC-3(6)(10)-P(U)D(B)R100…320-A(B)
2.15
Separated Single Polarized Symmetrical (3dB) or Asymmetrical (6 or10dB) Dual Band Hybrid for Frequency Range of 32-38GHz (31.8-39.5GHz)
• Interface at ODU side: 2xNEC flange
• Interface at antenna side: PDR320, UDR320, PBR320 or UBR320
or other customer request
• Material of the waveguide flange: Aluminium(A) or Brass(B)
• Content of the ordering code:
SSH-320-380-2NEC-"coupling rate"- "WG flange type"-"material
of the WG flange"
• Example code: SSH-320-380-2NEC-3-PDR320-A
SSH 11-38 GHZ HYBRIDS FOR 2 ODUs PART NO.: SSH-320-380-2NEC-3(6)(10)-P(U)D(B)R320-A(B)
B. RF Accessories (IS Series)2. HYBRID FOR 2 ODUs
Page 20
2.16
ISH/SSH 6-38 GHZ HYBRIDS FOR 2 ODUs – 3DB COUPLING RATE
2.17
ISH/SSH 6-38 GHZ HYBRIDS FOR 2 ODUs – 6DB COUPLING RATE
B. RF Accessories (IS Series)2. HYBRID FOR 2 ODUs
Page 21
2.18
ISH/SSH 6-38 GHZ HYBRIDS FOR 2 ODUs – 3DB COUPLING RATE
B. RF Accessories (IS Series)3. HYBRID FOR 4 ODUs (SINGLE POLARIZATION)
Page 22
3.1
SINGLE POLARIZED HYBRIDS FOR 4 ODUs
SH–4ODU consist of three hybrids
SH–4ODU consist of three hybrids
2?(1+1) System
Hot Standby Operation
(double capacity, very high availability
(4+0) System
Simultaneous Operation
(four-fold capacity)
(3+1) System
Hot Standby Operation
(triple capacity, increased availability)
3.2
Integrated Single Polarized Symmetrical (6dB) Single Band Hybrid for Frequency Range of 13, 15, 18, 23, 26, 28, 32, 38 GHz
• Interfaces at ODU and antenna side: NEC flange• Coupling rate: 6dB (25%), any other coupling rate is available upon
customer request• Content of the ordering code:
ISH-"frequency band"-4NEC-6• Example code: ISH-130-4NEC-6
ISH 13-38 GHZ HYBRIDS FOR 4 ODUs PART NO.: ISH-130…380-4NEC-6
B. RF Accessories (IS Series)3. HYBRID FOR 4 ODUs (SINGLE POLARIZATION)
Page 23
3.3
Separated Single Polarized Symmetrical (6dB) Single Band Hybridfor Frequency Range of 13, 15, 18, 23, 26, 28, 32, 38 GHz
• Interfaces at ODU side: 4xNEC flange• Interface at antenna side:
- 13GHz: PDR120, UDR120, PBR120 or UBR120 or other customer request- 13 and 15GHz: PDR140, UDR140, PBR140 or UBR140 or other customer request- 18, 23 and 26GHz: PDR220, UDR220, PBR220 or UBR220 or other customer request- 26GHz: PDR260, UDR260, PBR260 or UBR260 or other customer request- 28, 32 and 38GHz: PDR320, UDR320, PBR320 or UBR320 or other customer request
• Material of the waveguide flange: Aluminium(A) or Brass(B)• Coupling rate: 6dB (25%), any other coupling rate is available upon customer request• Content of the ordering code:
SSH-"frequency band"-4NEC-6-"WG flange type"-"material of the WG flange"• Example code: SSH-130-4NEC-6-PDR140-B6
SSH 13-38 GHZ HYBRIDS FOR 4 ODUs PART NO.: SSH-130…380-4NEC-6-P(U)D(B)R120…320-A(B)
3.4
ISH/SSH 13-38 GHZ HYBRIDS FOR 4 ODUs – 6DB COUPLING RATE
B. RF Accessories (IS Series)4. HYBRIDS FOR 4 ODUs (DUAL POLARISATION)
Page 24
4.2
4.1
Integrated Dual Polarized Symmetrical (3dB) or Asymmetrical (6 or 10dB)Single Band Hybrid for Frequency Range of 13,18, 38 GHz
• Interfaces at ODU side: NEC flange
• Interfaces at antenna side: interface for dual polarized Andrew(A), Grante(G) or RFS(R)
• Coupling rate: 3, 6 or 10dB at Vertical and Horizontal polarization
• Content of the ordering code:
IDH-"frequency band"-4NEC-"coupling rate for vertical pol. "-"coupling rate for
horizontal pol."-"Antenna manufacturer"
• Example code: IDH-130-4NEC-V6-H3-G
IDH 13, 18 AND 38 GHZ DUAL POLARIZED HYBRIDS FOR 4 ODUs PART NO.: IDH-130/180/380-4NEC-V3(6)(10)-H3(6)(10)-A(G)(R)
DUAL POLARIZED HYBRIDS FOR 4 ODUs
DH–4ODU consist of
one OMT (for polarization separation), and
two hybrids (for equipolar decoupling) 2 x (2+0) Dual Polarized System 2 x (1+1) Dual Polarized System
B. RF Accessories (IS Series)4. HYBRIDS FOR 4 ODUs (DUAL POLARISATION)
Page 25
4.3
IDH 13, 18 AND 38 GHZ DUAL POLARIZED HYBRIDS FOR 4 ODUs
B. RF Accessories (IS Series)5. MOUNTING BRACKET
Page 26
5.2
Mounting brackets (Separate Interface) for NEC ODU with interfaceadapter for the frequency range of 11, 13-15, 18-23, 26, 28, 32-38GHz
• Interface at ODU side: NEC flange• Interface at antenna side:
- 11GHz:PDR100, UDR100, PBR100 or UBR100 or other customer request- 11 and 13GHz: PDR120, UDR120, PBR120 or UBR120 or other customer request- 13 and 15GHz: PDR140, UDR140, PBR140 or UBR140 or other customer request- 18, 23 and 26GHz: PDR220, UDR220, PBR220 or UBR220 or other customer request- 26GHz: PDR260, UDR260, PBR260 or UBR260 or other customer request- 28, 32 and 38GHz: PDR320, UDR320, PBR320 or UBR320 or other customer request
• Material of the waveguide flange: Aluminium(A) or Brass(B)• Content of the ordering code:
SI-"frequency band"-NEC-"WG flange type"-"material of the WG flange"• Example code: SI-110-NEC-PDR120-B, SI-130-150-NEC-PDR140-A
MOUNTING BRACKETS WITH INTERFACE ADAPTER FOR 11-38GHZ ODU
5.1
Mounting bracket (Separate Interface) for NEC ODU (Pasolink V4, NEO) without interface adapter for the frequency range of 6/7/8 GHz
MOUNTING BRACKET WITHOUT INTERFACE ADAPTER FOR 6/7/8GHZ ODU PART NO.: SI-6/7/8-NEC-W/O
B. RF Accessories (IS Series)6. WAVEGUIDE-N TRANSDUCER
Page 27
6.1
Waveguide to N transducer for frequency range of 6/7/8 GHz
• Waveguide type: PDR 70, UDR70, PBR70, UBR70, PDR84, UDR84, PBR84, UBR84 or customer request
• Material of the Waveguide flange: (A)- aluminium or (B)-Brass• N connector: female • Content of the ordering code: "Waveguide type"-N-"Material of the WG flange"• Example code: PDR70-N-B, UDR84-N-A, ….
WG-N TRANSDUCER PART NO.: WG FLANGE-N-A(B)
6.2
WAVEGUIDE-N TRANSDUCER
B. RF Accessories (IS Series)7. LOW LOSS CABLES
Page 28
7.2
LOW LOSS CABLES
7.1
Part No.: LCC-50-NS(M)NS(M)-1.0Coaxial Cable with 2pcs Straight N-male Connectors; 1m
Part No.: LCC-50-NS(M)NS(M)-1.2Coaxial Cable with 2pcs Straight N-male Connectors; 1.2m
Part No.: LCC-50-NS(M)NR(M)-1.0Coaxial Cable with Staright N-male and Right Angle N-male Connector; 1m
Part No.: LCC-50-NS(M)NR(M)-1.2Coaxial Cable with Staright N-male and Right Angle N-male Connector; 1.2m
Part No.:LCC-50-NR(M)NR(M)-1.0Coaxial Cable with 2pcs Right Angle N-male Connectors; 1m
Part No.: LCC-50-NR(M)NR(M)-1.2Coaxial Cable with 2pcs Right Angle N-male Connectors
LOW LOSS CABLES
C. MEASURING TOOLS (IS SERIES)1. MEASURING TOOLS
Page 29
1.1
Interconnection cable set for two ODUs, Frequency Range of 6, 7, 8, 11, 13, 15, 18, 23, 26, 38 GHz (In case of 6/7/8GHz the ODU should has N connector)
• Attenuators - 20 dB with N(SMA)(K)* connectors - 2pcs• Waveguide adapter rings - 2pcs• Waveguide-SMA(K)* converters - 2 pcs, in case of 11-38GHz• N(SMA)(K) – N(SMA)(K)* cable - 1pc• IDU - ODU IF cables with connectors - 2pcs• Screws - 12pcs, in case of 11-38GHz • Content of the ordering code:
- NEC-ICBSET-”frequency range”-LAB-Bundle• Example code: NEC-ICBSET-38G-LAB-Bundle
* N connector is used for 6/7/8GHz (if the ODU has N connector), SMA for 11-26GHz, K for 28-38GHz
INTERCONNECTION RADIOFREQUENCY PART NO.: NEC-ICBSET-59…380-LAB-BUNDLE CABLE SET FOR 2 ODUS
1.3
Measurement frame for XPIC system is developed to testNEC PASOLINK XPIC System
• Frequency range: 13/18/38GHz
• Type of system: Dual polarized Measurement System
• Type of Waveguide: Rectangular
• Total Attenuation: 100 or 120 dB
• Number of interface for NEC ODUs : 4
• Type of connectors: SMA (female) or K (female)
• To check the frequencies of the ODUs there are four pieces SMA (10-26GHz) or
K (28-40GHz) connectors, which should be terminated if they are not used.
MEASURING FRAME FOR XPIC SYSTEM FOR 13(18)(38)GHZ PART NO.: MEASURING FRAME FOR XPIC
1.2
Direct mounted measuring frame for frequency range of 11, 13, 15, 18, 23, 26, 38 GHz, is developed for simulation of point to point microwave links
• The system can be used for the simulation of hot standby system(1+1). In this case two
direct mounted type hybrid should be installed to the place of the ODUs.
• For adjusting the attenuation of the microwave path the curves of the Variable Attenuator
should be used (between 80 and 120dB).
• To check the frequencies of the ODUs there are two pieces SMA (10-26GHz) or
K (28-40GHz) connectors, which should be terminated if they are not used.
Main part of the system:
- Variable Attenuator (attenuation*: 40 dB) 1pc
- Fix Attenuator (maximum attenuation*: 40 dB) 2pcs
- Single polarized Hybrid (3dB) (SH…-2NEC-3) 2pcs
- SMA (10–26 GHz) or K (28–40 GHz) connector 2pcs
- Radio Interfaces for NEC ODU 4pcs
- Low Power Termination (N male / SMA male / K male) 2pcs
• MS-Frequency band-fix attenuation* variable attenuation* -2 SMA or K connector 2 NEC
* Other attenuation values are available upon request
DIRECT MOUNTED MEASURING FRAME (11-38GHZ) PART NO.: MS-110…380-80F-40V-2SMA(K)-2NEC
How to Contact Us
Scientis Solutions Ltd.Innovation Centre, 49 Oxford Street, Leicester LE1 5 XY, EnglandEmail: [email protected]
Registered in England: 6851268, VAT Registration: GB 973723101
Copyright 2010 by Scientis Solutions Ltd. All rights reserved and Information is subject to change without notice.