E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
(Available with 7/8-16 UN threads, 1-16 UN threads or 1 1/8-16 UN threads)• Molded cordsets
• Receptacles
• Splitters (Section L)
• Junction Boxes (Section M)
• Field wireables
• Conduit adapters
• Accessories
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E2
IndustrialAutomation
min
ifast
minifast ® Selection Guide
Standard Applications Straight Female Right Angle Female Straight Male Right Angle Male
"B" Style - 1" Thread 16 AWG 16 AWG 16 AWG 16 AWG
Page E37 - E38 E39 - E40 E41 - E42 E43 - E44
Standard Applications Straight Male Right Angle Male
Style - 7/8" Thread 18 AWG 16 AWG 18 AWG 16 AWG
Page E17 - E20 E31 - E33 E21 - E24 E34 - E36
Standard Applications Straight Female Right Angle Female
Style - 7/8" Thread 18 AWG 16 AWG 18 AWG 16 AWG
Page E9 - E12 E25 - E27 E13 - E16 E28 - E30
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E3 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Standard Applications Straight Female Straight Male
Style Smooth Body
Page E55 E56
Standard Applications Straight Female Right Angle Female Straight Male Right Angle Male
"C" Style - 1-1/8"Thread 16 AWG 16 AWG 16 AWG 16 AWG
Page E45 - E46 E47 - E48 E49 - E50 E51 - E52
Standard Applications Straight Female Straight Male
Style Armored Cable
Page E53 E54
minifast ® Selection Guide
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E4
IndustrialAutomation
min
ifast
minifast ® Selection Guide
Tees/Accessories
Page E103 - E110
Cordsets Coil Cords
Page E57 - E58
Cordsets Extensions
Page E7 - E8
Receptacles
Page E59 - E93
Conduit Adapters
Page E101 - E102
Field Wireables
Page E95 - E100
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E5 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
20 2/18 AWG BN, BU26 2/16 AWG BK, WH28 2/18 AWG BK, WH30 3/18 AWG BN, BU, GN/YE31 3/18 AWG BN, BU, BK35 3/16 AWG RD/BK, RD/WH, GN36 3/16 AWG BK, WH, GN38 3/18 AWG BK, WH, GN311 3/18 AWG RD/BK, RD/WH, GN40 4/18 AWG BN, BU, BK, WH46 4/16 AWG BK, WH, RD, GN47 4/16 AWG BN, WH, BU, BK48 4/18 AWG BK, WH, RD, GN50 5/18 AWG BN, BU, BK, WH, GN/YE55 5/16 AWG RD/BK, RD/WH, RD/BU, RD/OG, GN56 5/16 AWG BK, WH, RD, OG, GN58 5/18 AWG BK, WH, RD, OG, GN511 5/18 AWG RD/BK, RD/WH, RD/BU, RD/OG, GN61 6/18 AWG BN, BU, WH, Gy, YE, GN66 6/16 AWG BK, WH, RD, OG, BU, GN68 6/18 AWG BK, WH, RD, OG, BU, GN6B6 6/16 AWG OG, BU, BK, WH, RD, GN76 7/16 AWG WH/BK, WH, BK, RD, OG, BU, GN86 8/16 AWG OG, BU, WH/BK, BK, WH, RD, GN, RD/BK96 9/16 AWG OG, BU, RD/BK, GN/BK, WH, RD, GN, WH/BK, BK106 10/16 AWG OG, BU, WH/BK, RD/BK, GN/BK, OG/BK, RD, GN, BK, WH126 12/16 AWG OG, BU, WH/BK, RD/BK, GN/BK, OG/BK, BU/BK, BK/WH, GN,RD, WH, BK__A Metal Clad Cable (18 straight only)__D Smooth Plug Body (16 AWG straight only)
Number of Wires / AWG / Conductor Colors
Length in Meters
(Blank) = PVC Jacket/S90 = PUR Jacket/S90-SP = PUR Coil CoRD/S101 =flexlife-10 - High Flex Cable/S529 =Yellow PUR Jacket, Braided Shield, PVC Inner
Jacket/S600 = CPE, Rubber Jacket/S824 =Yellow PLTC/S1587 = TPE, weldlife/XOR/S620 = Irradiated PVC, Weld Resistance/S .. = Consult Factory, Special/CS .. = Consult Factory, Special
* Male Connector Listed 1st, Female Connector 2ndExample: RSM RKM 40-2M
Insertion Point of Extension Cable 2nd Prefix*
R = StraightW = Right Angle
minifast
K = Female Connector, Female ThreadsS = Male Connector, Male ThreadsY = Male Connector, Female Threads
Gender
(Blank) = NylonM = Nickel Plated BrassV = Stainless Steel
Coupling Nut Material
R K M 30 - 4M /S..
minifast ® Cordset Part Number Key
Note:Part Number Keys are to assist in IDENTIFICATION ONLY. Consult Factory for catalog items not identified.
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E6
IndustrialAutomation
min
ifast
R K F V 30 - 1M /NPT /S..
K = Female Connector, Female ThreadsS = Male Connector, Male ThreadsX = Female Connector, Male Threads
Gender
Designator for Receptacle
(Blank) = Front MountP = Back Panel Mount
Mounting Style
(Blank) = Anodized AluminumK = NylonV = Stainless Steel
MaterialFirst Digit Represents Number of Wires20, 26, 28, 30, 31, 35, 36, 38, 311, 40, 46, 48, 50, 55, 56, 58, 511,61, 66, 68For minifast "B" and "C" Style:6B6 =6 wires76 = 7 wires86 = 8 wire96 = 9 wires106 =10 wires126 =12 wires
Number of Wires
minifast
(Blank) = 1/2-14 NPSM Threads/NPT =1/2-14 NPT Threads/14.5/NPT = 1/2-14 NPT Threads (B & C style)/14.75/NPT = 3/4-14 NPT Threads
Connection Thread
/S849 =22AWG/S .. = Consult Factory, Special/CS .. = Consult Factory, Special
(Blank) = Leads or PCB PinsL = Solder Cup
Connection Type
minifast ® Receptacle Part Number Key
B S 4 2 3 1 - 0 / 9
(Blank) = FemaleS = Male
Gender
1 = Standard
Termination
4 = minifast
Style
1 = Straight2 = Right Angle
Housing Style3 = 34 = 45 = 5
Number of Pins
0 = No Cable
Cable Option
B = Field Wireable
Field Wireable9 = PG 9 Cable Opening13.5 = PG 13.5 Cable Opening16 = PG 16 Cable Opening
Cable Opening
minifast Field Wireable Part Number Key
(Blank) = Solder Cup__M = Lead Length in MetersPCB = PCB Pins
Connection Type
Note:Part Number Keys are to assist in IDENTIFICATION ONLY. Consult Factory for catalog items not identified.
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E7 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
20 2/18 AWG BN, BU26 2/16 AWG BK, WH28 2/18 AWG BK, WH30 3/18 AWG BN, BU, GN/YE31 3/18 AWG BN, BU, BK35 3/16 AWG RD/BK, RD/WH, GN36 3/16 AWG BK, WH, GN38 3/18 AWG BK, WH, GN31 1 3/18 AWG RD/BK, RD/WH, GN40 4/18 AWG BN, BU, BK, WH46 4/16 AWG BK, WH, RD, GN47 4/16 AWG BN, WH, BU, BK48 4/18 AWG BK, WH, RD, GN50 5/18 AWG BN, BU, BK, WH, GN/YE55 5/16 AWG RD/BK, RD/WH, RD/BU, RD/OG, GN56 5/16 AWG BK, WH, RD, OG, GN58 5/18 AWG BK, WH, RD, OG, GN511 5/18 AWG RD/BK, RD/WH, RD/BU, RD/OG, GN61 6/18 AWG BN, BU, WH, Gy, YE, GN66 6/16 AWG BK, WH, RD, OG, BU, GN68 6/18 AWG BK, WH, RD, OG, BU, GN6B6 6/16 AWG OG, BU, BK, WH, RD, GN76 7/16 AWG WH/BK, WH, BK, RD, OG, BU, GN86 8/16 AWG OG, BU, WH/BK, BK, WH, RD, GN, RD/BK96 9/16 AWG OG, BU, RD/BK, GN/BK, WH, RD, GN, WH/BK, BK106 10/16 AWG OG, BU, WH/BK, RD/BK, GN/BK, OG/BK, RD, GN,
BK, WH126 12/16 AWG OG, BU, WH/BK, RD/BK, GN/BK, OG/BK, BU/BK,
BK/WH, GN, RD, WH, BK__A Metal Clad Cable (8 straight only)__D Smooth Plug Body (16 AWG straight only)
Number of Wires / AWG / Conductor Colors
Length in Meters
(Blank) = PVC Jacket/S90 = PUR Jacket/S90-SP = PUR Coil CoRD/S101 =flexlife-10 - High Flex Cable/S529 =Yellow PUR Jacket, Braided Shield, PVC
Inner Jacket/S600 = CPE, Rubber Jacket/S824 =Yellow PLTC/S1587 = TPE, weldlife/XOR/S620= Irradiated PVC, Weld Resistance/S .. = Consult Factory, Special/CS .. = Consult Factory, Special
* Male Connector Listed 1st, Female Connector 2ndExample: RSM RKM 40-2M
Insertion Point of Extension Cable 2nd Prefix*
R = StraightW = Right Angle
minifast
K = Female Connector, Female ThreadsS = Male Connector, Male ThreadsY = Male Connector, Female Threads
Gender
(Blank) = NylonM = Nickel Plated BrassV = Stainless Steel
Coupling Nut Material
R S M R K M 30 - 4M /S..
minifast ® Extension Cordset Part Number Key
Note:Part Number Keys are to assist in IDENTIFICATION ONLY. Consult Factory for catalog items not identified.
R S M R K M 30 - 4M /S..
Example:
R K M 4.4T - 2 - R S C 40
Example:
Note: Hybrid connector extensions also available. Consult factory.
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E8
IndustrialAutomation
min
ifast
Other Extension Examples:
minifast ® Extension Cordset Part Number Key
W S M W K M 30 - 4M /S..
R S M W K M 30 - 4M /S..
W S M R K M 30 - 4M /S..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E9 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Housing Style Part Number Cable Features Pinout
RKM 20- *M
AWM PVC Yellow2x18 AWG105°C7.3 mm ODCable #RF50511-*M†
flexlife ® 1. BN2. BU
RKM 30-*M
AWM PVC Yellow3x18 AWG105°C7.3 mm ODCable #RF50512-*M†
flexlife
1. GN/YE2. BN3. BU
RKM 30-*M/S90
AWM PUR Yellow3x18 AWG105°C7.3 mm ODCable #RF50545-*M†
Cut AbrasionImmune
RKM 30-*M/S101
AWM TPE Yellow3x18 AWG105°C7.3 mm ODCable #RF50545-*M†
flexlife-10, highflex over 10million cycles
RKM 311-*M
AWM PVC Yellow3x18 AWG105°C7.2 mm ODCable #RF51173-*M†
flexlife
1. GN2. RD/BK3. RD/WH
RKM 311-*M/S600
SJOOW CPE, Yellow3x18 AWG105°C8.0 mm ODCable #RF50658-*M†
Weld FlashImmune, FlameImmune
RKM 311-*M/XOR/S620
AWM Irradiated PVCYellow3x18 AWG80°C, 5.7 mm ODCable #RF04159-*M†
Weld Resistance1. GN2. RD3. RD/WH
RKM 31-*M
AWM PVC Yellow3x18 AWG105°C, 7.3 mm ODCable #RF50513-*M†
flexlife
1. BK2. BN3. BU
RKM 31-*M/S600
SJOOW CPE Yellow3x18 AWG105°C, 8.0 mm ODCable #RF50654-*M†
Weld FlashImmune, FlameImmune
RKM 31-*M/S759
AWM PVC Grey3x22 AWG80°C, 5.2 mm ODCable #RF04106-*M†
Braided Shield
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RKM .."; "RK .." indicates nylon and "RKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
• Straight Female Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 300 V, 9 A
2 and 3-Wire minifast ® Cordsets, Standard
RKM ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E10
IndustrialAutomation
Cor
dset
s
Housing Style Part Number Cable Features Pinout
RKM 31-*M/S816
AWM PVC Yellow3x20 AWG105°C, 5.2 mm ODCable #RF50674-*M†
flexlife1. BK2. BN3. BU
RKM 40-*M
AWM PVC Yellow4x18 AWG105°C7.3 mm ODCable #RF50548-*M†
flexlife ®
1. BN2. WH3. BU4. BK
RKM 40-*M/S90
AWM PUR Yellow4x18 AWG105°C7.3 mm ODCable #RF50544-*M†
Cut/AbrasionImmune
RKM 40-*M/S101
AWM TPE Yellow4x18 AWG105°C7.2 mm ODCable #RF50968-*M†
flexlife-10, HighFlex - Over 10million cycles
RKM 40-*M/S529
PUR Yellow4x20 AWG105°C5.7 mm ODCable #RF50526-*M†
Cut/AbrasionImmune,BraidedMechanicalShield
RKM 40-*M/S600
SJOOW CPE Yellow4x18 AWG105°C8.5 mm ODCable #RF50644-*M†
Weld FlashImmune, FlameImmune
RKM 40-*M/S824
ITC PLTC PVC Yellow4x18 AWG105°C7.2 mm ODCable #RF50844-*M†
flexlife
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RKM .."; "RK .." indicates nylon and "RKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
3 and 4-Wire minifast ® Cordsets, Standard
RKM ..
• Straight Female Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 300 V, 9 A
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E11 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Housing Style Part Number Cable Features Pinout
RKM 50-*M
AWM PVC Yellow5x18 AWG105°C7.3 mm ODCable #RF50549-*M†
flexlife ®
1. BK2. BU3. GN/YE4. BN5. WH
RKM 50-*M/S90
AWM PUR Yellow5x18 AWG105°C7.3 mm ODCable #RF50751-*M†
Cut/AbrasionImmune
RKM 50-*M/S101
AWM TPE Yellow5x18 AWG105°C7.2 mm ODCable #RF51174-*M†
flexlife-10, highflex over 10million cycles
RKM 50-*M/S1551
AWM PVC Yellow5x18 AWG105°C7.3 mm ODCable #RF50578-*M†
Yellowconductorinstead ofGreen/Yellow
1. BK2. BU3. YE4. BN5. WH
RKM 511-*M
AWM PVC Yellow5x18 AWG105°C7.3 mm ODCable #RF50521-*M†
flexlife1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BK
RKM 511-*M/S600
SJOOW CPE Yellow5x18 AWG105°C9.2 mm ODCable #RF50659-*M†
Weld FlashImmune, FlameImmune
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RKM .."; "RK .." indicates nylon and "RKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
5-Wire minifast ® Cordsets, Standard
RKM ..
• Straight Female Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 300 V, 9 A
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E12
IndustrialAutomation
Cor
dset
s
Housing Style Part Number Cable Features Pinout
RKM 60-*M/S90/S853
AWM PUR Yellow3x18 AWG105°C7.3 mm ODCable #RF50545-*M†
6-pin styleconnector with3 conductor
1. BN2. N/C3. GN/YE4. N/C5. BU6. N/C
RKM 61-*M
AWM PVC Yellow6x18 AWG105°C7.3 mm ODCable #RF50575-*M†
flexlife ®
1. GN2. WH3. BU4. Gy5. YE6. BNRKM 61-*M/S739
ITC PLTC PVC Yellow7x18 AWG105°C7.3 mm ODCable #RF50637-*M†
Shielded cablewith drain wire,not connected atplug.
RKM 61-*M/S763
AWM PVC Black6x18 AWG105°C7.3 mm ODCable #RF50551-*M†
Shielded cablewith drain wire,not connected atplug
1. BU2. WH3. BK4. GN5. RD6. OGRKM 61-*M/S1052/S1587
AWM TPE Grey6x18 AWG105°C7.2 mm ODCable #RF51274-*M†
weldlife, WeldFlash Immune
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RKM .."; "RK .." indicates nylon and "RKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
6-Wire minifast ® Cordsets, Standard
RKM ..
• Straight Female Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 300 V, 9 A
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E13 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Housing Style Part Number Cable Features Pinout
WKM 20- *M
AWM PVC Yellow2x18 AWG105°C7.3 mm ODCable #RF50511-*M†
flexlife ® 1. BN2. BU
WKM 30-*M
AWM PVC Yellow3x18 AWG105°C7.3 mm ODCable #RF50512-*M†
flexlife
1. GN/YE2. BN3. BU
WKM 30-*M/S90
AWM PUR Yellow3x18 AWG105°C7.3 mm ODCable #RF50545-*M†
Cut AbrasionImmune
WKM 30-*M/S101
AWM TPE Yellow3x18 AWG105°C7.2 mm ODCable #RF51173-*M†
flexlife-10, highflex over 10million cycles
WKM 311-*M
AWM PVC Yellow3x18 AWG105°C7.3 mm ODCable #RF50520-*M†
flexlife
1. GN2. RD/BK3. RD/WH
WKM 311-*M/S600
SJOOW CPE, Yellow3x18 AWG105°C8.0 mm ODCable #RF50658-*M†
Weld FlashImmune, FlameImmune
WKM 31-*M
AWM PVC Yellow3x18 AWG105°C7.3 mm ODCable #RF50513-*M†
flexlife
1. BK2. BN3. BU
WKM 31-*M/S600
SJOOW CPE Yellow3x18 AWG105°C8.0 mm ODCable #RF50654-*M†
Weld FlashImmune, FlameImmune
WKM 31-*M/S759
AWM PVC Grey3x22 AWG80°C5.2 mm ODCable #RF04106-*M†
Braided Shield
WKM 31-*M/S816
AWM PVC Yellow3x20 AWG105°C5.2 mm ODCable #RF50674-*M†
flexlife
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WKM .."; "WK .." indicates nylon and "WKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
2 and 3-Wire minifast ® Cordsets, Standard
WKM ..
• Right Angle Female Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 300 V, 9 A
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E14
IndustrialAutomation
Cor
dset
s
Housing Style Part Number Cable Features Pinout
WKM 311-*M/XOR/S620
AWM Irradiated PVCYellow, 3x18 AWG80°C5.7 mm ODCable #RF04159-*M†
Weld Resistance1. GN2. RD3. RD/WH
WKM 40-*M
AWM PVC Yellow4x18 AWG105°C7.3 mm ODCable #RF50548-*M†
flexlife ®
1. BN2. WH3. BU4. BK
WKM 40-*M/S90
AWM PUR Yellow4x18 AWG105°C7.3 mm ODCable #RF50544-*M†
Cut/AbrasionImmune
WKM 40-*M/S101
AWM TPE Yellow4x18 AWG105°C7.2 mm ODCable #RF50968-*M†
flexlife-10, HighFlex - Over 10million cycles
WKM 40-*M/S529
PUR Yellow4x20 AWG105°C5.7 mm ODCable #RF50526-*M†
Cut/AbrasionImmune,BraidedMechanicalShield
WKM 40-*M/S600
SJOOW CPE Yellow4x18 AWG105°C8.5 mm ODCable #RF50644-*M†
Weld FlashImmune, FlameImmune
WKM 40-*M/S824
ITC PLTC PVC Yellow4x18 AWG105°C7.2 mm ODCable #RF50844-*M†
flexlife
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WKM .."; "WK .." indicates nylon and "WKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
3 and 4-Wire minifast ® Cordsets, Standard
WKM ..
• Right Angle Female Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 300 V, 9 A
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E15 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Housing Style Part Number Cable Features Pinout
WKM 50-*M
AWM PVC Yellow5x18 AWG105°C7.3 mm ODCable #RF50549-*M†
flexlife ®
1. BK2. BU3. GN/YE4. BN5. WH
WKM 50-*M/S90
AWM PUR Yellow5x18 AWG105°C7.3 mm ODCable #RF50751-*M†
Cut/AbrasionImmune
WKM 50-*M/S101
AWM TPE Yellow5x18 AWG105°C7.2 mm ODCable #RF51174-*M†
flexlife-10, highflex over 10million cycles
WKM 50-*M/S1551
AWM PVC Yellow5x18 AWG105°C7.3 mm ODCable #RF50578-*M†
Yellowconductorinstead ofGreen/Yellow
1. BK2. BU3. YE4. BN5. WH
WKM 511-*M
AWM PVC Yellow5x18 AWG105°C7.3 mm ODCable #RF50521-*M†
flexlife1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BK
WKM 511-*M/S600
SJOOW CPE Yellow5x18 AWG105°C9.2 mm ODCable #RF50659-*M†
Weld FlashImmune, FlameImmune
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WKM .."; "WK .." indicates nylon and "WKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
5-Wire minifast ® Cordsets, Standard
WKM ..
• Right Angle Female Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 300 V, 9 A
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E16
IndustrialAutomation
Cor
dset
s
Housing Style Part Number Cable Features Pinout
WKM 60-*M/S90/S853
AWM PUR Yellow3x18 AWG105°C7.3 mm ODCable #RF50545-*M†
6 pin styleconnector with3 conductor
1. BN2. N/C3. GN/YE4. N/C5. BU6. N/C
WKM 61-*M
AWM PVC Yellow6x18 AWG105°C7.3 mm ODCable #RF50575-*M†
flexlife ®
1. GN2. WH3. BU4. Gy5. YE6. BNWKM 61-*M/S739
ITC PLTC PVC Yellow7x18 AWG105°C7.3 mm ODCable #RF50637-*M†
Shielded cablewith drain wire,not connected atplug
WKM 61-*M/S763
AWM PVC Black6x18 AWG105°C7.3 mm ODCable #RF50551-*M†
Shielded Cable,with drain wirenot connected atplug
1. BU2. WH3. BK4. GN5. RD6. OGWKM 61-*M/S1052/S1587
AWM TPE Grey6x18 AWG105°C7.2 mm ODCable #RF51274-*M†
weldlife, WeldFlash Immune
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WKM .."; "WK .." indicates nylon and "WKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
6-Wire minifast ® Cordsets, Standard
WKM ..
• Right Angle Female Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 300 V, 9 A
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E17 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Housing Style Part Number Cable Features Pinout
RSM 20- *M
AWM PVC Yellow2x18 AWG105°C7.3 mm ODCable #RF50511-*M†
flexlife ® 1. BN2. BU
RSM 30-*M
AWM PVC Yellow3x18 AWG105°C7.3 mm ODCable #RF50512-*M†
flexlife
1. GN/YE2. BN3. BU
RSM 30-*M/S90
AWM PUR Yellow3x18 AWG105°C7.3 mm ODCable #RF50545-*M†
Cut AbrasionImmune
RSM 30-*M/S101
AWM TPE Yellow3x18 AWG105°C7.2 mm ODCable #RF51173-*M†
flexlife-10, highflex over 10million cycles
RSM 311-*M
AWM PVC Yellow3x18 AWG105°C7.3 mm ODCable #RF50520-*M†
flexlife
1. GN2. RD/BK3. RD/WH
RSM 311-*M/S600
SJOOW CPE, Yellow3x18 AWG105°C8.0 mm ODCable #RF50658-*M†
Weld FlashImmune, FlameImmune
RSM 311-*M/XOR/S620
AWM Irradiated PVCYellow, 3x18 AWG80°C5.7 mm ODCable #RF04159-*M†
Weld Resistance1. GN2. RD3. RD/WH
RSM 31-*M
AWM PVC Yellow3x18 AWG105°C7.3 mm ODCable #RF50513-*M†
flexlife
1. BK2. BN3. BU
RSM 31-*M/S600
SJOOW CPE Yellow3x18 AWG105°C8.0 mm ODCable #RF50654-*M†
Weld FlashImmune, FlameImmune
RSM 31-*M/S759
AWM PVC Grey3x22 AWG80°C5.2 mm ODCable #RF04106-*M†
Braided Shield
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RSM .."; "RS .." indicates nylon and "RSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
2 and 3-Wire minifast ® Cordsets, Standard
• Straight Male Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 300 V, 9 A
RSM ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E18
IndustrialAutomation
Cor
dset
s
Housing Style Part Number Cable Features Pinout
RSM 31-*M/S816
AWM PVC Yellow3x20 AWG105°C5.2 mm ODCable #RF50674-*M†
flexlife1. BK2. BN3. BU
RSM 40-*M
AWM PVC Yellow4x18 AWG105°C7.3 mm ODCable #RF50548-*M†
flexlife ®
1. BN2. WH3. BU4. BK
RSM 40-*M/S90
AWM PUR Yellow4x18 AWG105°C7.3 mm ODCable #RF50544-*M†
Cut/AbrasionImmune
RSM 40-*M/S101
AWM TPE Yellow4x18 AWG105°C7.2 mm ODCable #RF50968-*M†
flexlife-10, HighFlex - Over 10million cycles
RSM 40-*M/S529
PUR Yellow4x20 AWG105°C5.7 mm ODCable #RF50526-*M†
Cut/AbrasionImmune,BraidedMechanicalShield
RSM 40-*M/S600
SJOOW CPE Yellow4x18 AWG105°C8.5 mm ODCable #RF50644-*M†
Weld FlashImmune, FlameImmune
RSM 40-*M/S824
ITC PLTC PVC Yellow4x18 AWG105°C7.2 mm ODCable #RF50844-*M†
flexlife
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RSM .."; "RS .." indicates nylon and "RSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
3 and 4-Wire minifast ® Cordsets, Standard
• Straight Male Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 300 V, 9 A
RSM ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E19 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Housing Style Part Number Cable Features Pinout
RSM 50-*M
AWM PVC Yellow5x18 AWG105°C7.3 mm ODCable #RF50549-*M†
flexlife ®
1. BK2. BU3. GN/YE4. BN5. WH
RSM 50-*M/S90
AWM PUR Yellow5x18 AWG105°C7.3 mm ODCable #RF50751-*M†
Cut/AbrasionImmune
RSM 50-*M/S101
AWM TPE Yellow5x18 AWG105°C7.2 mm ODCable #RF51174-*M†
flexlife-10, highflex over 10million cycles
RSM 50-*M/S1551
AWM PVC Yellow5x18 AWG105°C7.3 mm ODCable #RF50578-*M†
Yellowconductorinstead ofGreen/Yellow
1. BK2. BU3. YE4. BN5. WH
RSM 511-*M
AWM PVC Yellow5x18 AWG105°C7.3 mm ODCable #RF50521-*M†
flexlife1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BK
RSM 511-*M/S600
SJOOW CPE Yellow5x18 AWG105°C9.2 mm ODCable #RF50659-*M†
Weld FlashImmune, FlameImmune
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RSM .."; "RS .." indicates nylon and "RSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
5-Wire minifast ® Cordsets, Standard
• Straight Male Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 300 V, 9 A
RSM ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E20
IndustrialAutomation
Cor
dset
s
6-Wire minifast ® Cordsets, Standard
Housing Style Part Number Cable Features Pinout
RSM 60-*M/S90/S853
AWM PUR Yellow3x18 AWG105°C7.3 mm ODCable #RF50545-*M†
6 pin styleconnector with3 conductor
1. BN2. N/C3. GN/YE4. N/C5. BU6. N/C
RSM 61-*M
AWM PVC Yellow6x18 AWG105°C7.3 mm ODCable #RF50575-*M†
flexlife ®
1. GN2. WH3. BU4. Gy5. YE6. BNRSM 61-*M/S739
ITC PLTC PVC Yellow7x18 AWG105°C7.3 mm ODCable #RF50637-*M†
Shielded cablewith drain wire,not connected atplug.
RSM 61-*M/S763
AWM PVC Black6x18 AWG105°C7.3 mm ODCable #RF50551-*M†
Shielded Cable,with drain wirenot connected atplug
1. BU2. WH3. BK4. GN5. RD6. OGRSM 61-*M/S1052/S1587
AWM TPE Grey6x18 AWG105°C7.2 mm ODCable #RF51274-*M†
weldlife, WeldFlash Immune
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RSM .."; "RS .." indicates nylon and "RSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
• Straight Male Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 300 V, 9 A
RSM ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E21 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Housing Style Part Number Cable Features Pinout
WSM 20- *M
AWM PVC Yellow2x18 AWG105°C7.3 mm ODCable #RF50511-*M†
flexlife ® 1. BN2. BU
WSM 30-*M
AWM PVC Yellow3x18 AWG105°C7.3 mm ODCable #RF50512-*M†
flexlife
1. GN/YE2. BN3. BU
WSM 30-*M/S90
AWM PUR Yellow3x18 AWG105°C7.3 mm ODCable #RF50545-*M†
Cut AbrasionImmune
WSM 30-*M/S101
AWM TPE Yellow3x18 AWG105°C7.2 mm ODCable #RF51173-*M†
flexlife-10, highflex over 10million cycles
WSM 311-*M
AWM PVC Yellow3x18 AWG105°C7.3 mm ODCable #RF50520-*M†
flexlife
1. GN2. RD/BK3. RD/WH
WSM 311-*M/S600
SJOOW CPE, Yellow3x18 AWG105°C8.0 mm ODCable #RF50658-*M†
Weld FlashImmune, FlameImmune
WSM 31-*M
AWM PVC Yellow3x18 AWG105°C7.3 mm ODCable #RF50513-*M†
flexlife
1. BK2. BN3. BU
WSM 31-*M/S600
SJOOW CPE Yellow3x18 AWG105°C8.0 mm ODCable #RF50654-*M†
Weld FlashImmune, FlameImmune
WSM 31-*M/S759
AWM PVC Grey3x22 AWG80°C5.2 mm ODCable #RF04106-*M†
Braided Shield
WSM 31-*M/S816
AWM PVC Yellow3x20 AWG105°C5.2 mm ODCable #RF50674-*M†
flexlife
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WSM .."; "WS .." indicates nylon and "WSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
2 and 3-Wire minifast ® Cordsets, Standard
• Right Angle Male Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 300 V, 9 A
WSM ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E22
IndustrialAutomation
Cor
dset
s
Housing Style Part Number Cable Features Pinout
WSM 311-*M/XOR/S620
AWM Irradiated PVCYellow, 3x18 AWG80°C5.7 mm ODCable #RF04159-*M†
Weld Resistance1. GN2. RD3. RD/WH
WSM 40-*M
AWM PVC Yellow4x18 AWG105°C7.3 mm ODCable #RF50548-*M†
flexlife ®
1. BN2. WH3. BU4. BK
WSM 40-*M/S90
AWM PUR Yellow4x18 AWG105°C7.3 mm ODCable #RF50544-*M†
Cut/AbrasionImmune
WSM 40-*M/S101
AWM TPE Yellow4x18 AWG105° C7.2 mm ODCable #RF50968-*M†
flexlife-10, HighFlex - Over 10million cycles
WSM 40-*M/S529
PUR Yellow4x20 AWG105°C5.7 mm ODCable #RF50526-*M†
Cut/AbrasionImmune,BraidedMechanicalShield
WSM 40-*M/S600
SJOOW CPE Yellow4x18 AWG105°C8.5 mm ODCable #RF50644-*M†
Weld FlashImmune, FlameImmune
WSM 40-*M/S824
ITC PLTC PVC Yellow4x18 AWG105°C7.2 mm ODCable #RF50844-*M†
flexlife
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WSM .."; "WS .." indicates nylon and "WSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
4-Wire minifast ® Cordsets, Standard
• Right Angle Male Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 300 V, 9 A
WSM ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E23 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Housing Style Part Number Cable Features Pinout
WSM 50-*M
AWM PVC Yellow5x18 AWG105°C7.3 mm ODCable #RF50549-*M†
flexlife ®
1. BK2. BU3. GN/YE4. BN5. WH
WSM 50-*M/S90
AWM PUR Yellow5x18 AWG105°C7.3 mm ODCable #RF50751-*M†
Cut/AbrasionImmune
WSM 50-*M/S101
AWM TPE Yellow5x18 AWG105°C7.2 mm ODCable #RF51174-*M†
flexlife-10, highflex over 10million cycles
WSM 50-*M/S1551
AWM PVC Yellow5x18 AWG105°C7.3 mm ODCable #RF50578-*M†
Yellowconductorinstead ofGreen/Yellow
1. BK2. BU3. YE4. BN5. WH
WSM 511-*M
AWM PVC Yellow5x18 AWG105°C7.3 mm ODCable #RF50521-*M†
flexlife1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BK
WSM 511-*M/S600
SJOOW CPE Yellow5x18 AWG105°C9.2 mm ODCable #RF50659-*M†
Weld FlashImmune, FlameImmune
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WSM .."; "WS .." indicates nylon and "WSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
5-Wire minifast ® Cordsets, Standard
• Right Angle Male Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 300 V, 9 A
WSM ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E24
IndustrialAutomation
Cor
dset
s
Housing Style Part Number Cable Features Pinout
WSM 60-*M/S90/S853
AWM PUR Yellow3x18 AWG105°C7.3 mm ODCable #RF50545-*M†
6 pin styleconnector with3 conductor
1. BN2. N/C3. GN/YE4. N/C5. BU6. N/C
WSM 61-*M
AWM PVC Yellow6x18 AWG105°C7.3 mm ODCable #RF50575-*M†
flexlife ®
1. GN2. WH3. BU4. Gy5. YE6. BNWSM 61-*M/S739
ITC PLTC PVC Yellow7x18 AWG105°C7.3 mm ODCable #RF50637-*M†
Shielded cablewith drain wire,not connected atplug
WSM 61-*M/S763
AWM PVC Black6x18 AWG105°C7.3 mm ODCable #RF50551-*M†
Shielded Cable,with drain wirenot connected atplug
1. BU2. WH3. BK4. GN5. RD6. OGWSM 61-*M/S1052/S1587
AWM TPE Grey6x18 AWG105°C7.2 mm ODCable #RF51274-*M†
weldlife, WeldFlash Immune
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WSM .."; "WS .." indicates nylon and "WSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
6-Wire minifast ® Cordsets, Standard
• Right Angle Male Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 300 V, 9 A
WSM ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E25 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
2, 3 and 4-Wire minifast ® Cordsets, Heavy Duty
Housing Style Part Number Cable Features Pinout
RKM 26-*M
STOW PVC Yellow2x16 AWG105°C10.4 mm ODCable #RF50561-*M†
flexlife ® 1. WH2. BK
RKM 35-*M
STOW PVC Yellow3x16 AWG105°C10.4 mm ODCable #RF50537-*M†
flexlife
1. GN2. RD/BK3. RD/WH
RKM 35-*M/S600
SOOW CPE Yellow3x16 AWG105°C10.3 mm ODCable #RF50596-*M†
Weld FlashImmune, FlameImmune
RKM 36-*M
STOW PVC Yellow3x16 AWG105°C10.4 mm ODCable #RF50536-*M†
flexlife1. GN2. BK3. WH
RKM 36D-*M/S1062
STOW PVC Yellow3x16 AWG105° C10.4 mm ODCable #RF50536-*M†
flexlife ® Cable,PVC plug bodywith PVC contactcarriers
1. GN2. BK3. WH
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RKM .."; "RK .." indicates nylon and "RKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
RKM ..
• Straight Female Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 V, 9 A
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E26
IndustrialAutomation
Cor
dset
s
2, 3 and 4-Wire minifast ® Cordsets, Heavy Duty
Housing Style Part Number Cable Features Pinout
RKM 46-*M
STOW PVC Yellow4x16 AWG105°C11 mm ODCable #RF50538-*M†
flexlife
1. BK2. WH3. RD4. GN
RKM 46-*M/S600
SOOW CPE Yellow4x16 AWG105°C11 mm ODCable #RF50595-*M†
Weld FlashImmune, FlameImmune
RKM 46-*M/S824
TC PVC Yellow4x16 AWG90°C9.6 mm ODCable #RF51220-*M†
Tray Rated
RKM 46D-*M/S1062
STOW PVC Yellow4x16 AWG105° C11 mm ODCable #RF50538-*M†
flexlife ® Cable,PVC plug bodywith PVC contactcarriers
RKM 47-*M
STOW PVC Yellow4x16 AWG105°C13.2 mm ODCable #RF50626-*M†
flexlife
1. BN2. WH3. BU4. BK
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RKM .."; "RK .." indicates nylon and "RKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
RKM ..
• Straight Female Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 V, 9 A
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E27 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Housing Style Part Number Cable Features Pinout
RKM 55-*M
STOW PVC Yellow5x16 AWG105°C13.2 mm ODCable #RF50540-*M†
flexlife ®
1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BK
RKM 55-*M/S600
SOOW CPE Yellow5x16 AWG105°C13 mm ODCable #RF50597-*M†
Weld FlashImmune, FlameImmune
1. RD2. RD3. GN4. RD5. RD
RKM 56-*M
STOW PVC Yellow5x16 AWG105°C13.2 mm ODCable #RF50539-*M†
flexlife1. WH2. RD3. GN4. OG5. BK
RKM 56-*M/S1587
STOW TPE Yellow5x16 AWG105°C13.2 mm ODCable #RF51265-*M†
weldlife, WeldFlash Immune
RKM 56D-*M/S1062
STOW PVC Yellow5x16 AWG105° C13.2 mm ODCable #RF50539-*M†
flexlife ® Cable,PVC plug bodywith PVC contactcarriers
1. WH2. RD3. GN4. OG5. BK
RKM 66-*M
STOW PVC Yellow6x16 AWG105°C13.2 mm ODCable #RF50565-*M†
flexlife
1. WH2. RD3. GN4. OG5. BK6. BU
RKM 66D-*M/S1062
STOW PVC Yellow6x16 AWG105° C13.2 mm ODCable #RF50565-*M†
flexlife ® Cable,PVC plug bodywith PVC contactcarriers
1. WH2. RD3. GN4. OG5. BK6. BU
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RKM .."; "RK .." indicates nylon and "RKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
5 and 6-Wire minifast ® Cordsets, Heavy Duty
RKM ..
• Straight Female Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 V, 9 A
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E28
IndustrialAutomation
Cor
dset
s
2, 3 and 4-Wire minifast ® Cordsets, Heavy Duty
Housing Style Part Number Cable Features Pinout
WKM 26-*M
STOW PVC Yellow2x16 AWG105°C10.4 mm ODCable #RF50561-*M†
flexlife ® 1. WH2. BK
WKM 35-*M
STOW PVC Yellow3x16 AWG105°C10.4 mm ODCable #RF50537-*M†
flexlife
1. GN2. RD/BK3. RD/WH
WKM 35-*M/S600
SOOW CPE Yellow3x16 AWG105°C10.3 mm ODCable #RF50596-*M†
Weld FlashImmune, FlameImmune
WKM 36-*M
STOW PVC Yellow3x16 AWG105°C10.4 mm ODCable #RF50536-*M†
flexlife
1. GN2. BK3. WH
WKM 36D-*M/S1062
STOW PVC Yellow3x16 AWG105° C10.4 mm ODCable #RF50536-*M†
flexlife ® Cable,PVC plug bodywith PVC contactcarriers
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WKM .."; "WK .." indicates nylon and "WKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
• Right Angle Female Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 V, 9 A
WKM ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E29 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
2, 3 and 4-Wire minifast ® Cordsets, Heavy Duty
Housing Style Part Number Cable Features Pinout
WKM 46-*M
STOW PVC Yellow4x16 AWG105°C11 mm ODCable #RF50538-*M†
flexlife
1. BK2. WH3. RD4. GN
WKM 46-*M/S600
SOOW CPE Yellow4x16 AWG105°C11 mm ODCable #RF50595-*M†
Weld FlashImmune, FlameImmune
WKM 46-*M/S824
TC PVC Yellow4x16 AWG90°C9.6 mm ODCable #RF51220-*M†
Tray Rated
WKM 46D-*M/S1062
STOW PVC Yellow4x16 AWG105° C11 mm ODCable #RF50538-*M†
flexlife ® Cable,PVC plug bodywith PVC contactcarriers
WKM 47-*M
STOW PVC Yellow4x16 AWG105°C13.2 mm ODCable #RF50626-*M†
flexlife
1. BN2. WH3. BU4. BK
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WKM .."; "WK .." indicates nylon and "WKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
• Right Angle Female Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 V, 9 A
WKM ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E30
IndustrialAutomation
Cor
dset
s
Housing Style Part Number Cable Features Pinout
WKM 55-*M
STOW PVC Yellow5x16 AWG105°C13.2 mm ODCable #RF50540-*M†
flexlife ®
1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BK
WKM 55-*M/S600
SOOW CPE Yellow5x16 AWG105°C13 mm ODCable #RF50597-*M†
Weld FlashImmune, FlameImmune
1. RD2. RD3. GN4. RD5. RD
WKM 56-*M
STOW PVC Yellow5x16 AWG105°C13.2 mm ODCable #RF50539-*M†
flexlife
1. WH2. RD3. GN4. OG5. BK
WKM 56-*M/S1587
STOW TPE Yellow5x16 AWG105°C13.2 mm ODCable #RF51265-*M†
weldlife, WeldFlash Immune
WKM 56D-*M/S1062
STOW PVC Yellow5x16 AWG105° C13.2 mm ODCable #RF50539-*M†
flexlife ® Cable,PVC plug bodywith PVC contactcarriers
WKM 66-*M
STOW PVC Yellow6x16 AWG105°C13.2 mm ODCable #RF50565-*M†
flexlife 1. WH2. RD3. GN4. OG5. BK6. BUWKM 66D-*M/S1062
STOW PVC Yellow6x16 AWG105° C13.2 mm ODCable #RF50565-*M†
flexlife ® Cable,PVC plug bodywith PVC contactcarriers
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WKM .."; "WK .." indicates nylon and "WKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
5 and 6-Wire minifast ® Cordsets, Heavy Duty
• Right Angle Female Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 V, 9 A
WKM ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E31 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Housing Style Part Number Cable Features Pinout
RSM 26-*M
STOW PVC Yellow2x16 AWG105°C10.4 mm ODCable #RF50561-*M†
flexlife ® 1. WH2. BK
RSM 35-*M
STOW PVC Yellow3x16 AWG105°C10.4 mm ODCable #RF50537-*M†
flexlife
1. GN2. RD/BK3. RD/WH
RSM 35-*M/S600
SOOW CPE Yellow3x16 AWG105°C10.3 mm ODCable #RF50596-*M†
Weld FlashImmune, FlameImmune
RSM 36-*M
STOW PVC Yellow3x16 AWG105°C10.4 mm ODCable #RF50536-*M†
flexlife
1. GN2. BK3. WH
RSM 36D-*M/S1062
STOW PVC Yellow3x16 AWG105° C10.4 mm ODCable #RF50536-*M†
flexlife ® Cable,PVC plug bodywith PVC contactcarriers
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RSM .."; "RS .." indicates nylon and "RSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
2, 3 and 4-Wire minifast ® Cordsets, Heavy Duty
• Straight Male Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 V, 9 A
RSM ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E32
IndustrialAutomation
Cor
dset
s
Housing Style Part Number Cable Features Pinout
RSM 46-*M
STOW PVC Yellow4x16 AWG105°C11 mm ODCable #RF50538-*M†
flexlife
1. BK2. WH3. RD4. GN
RSM 46-*M/S600
SOOW CPE Yellow4x16 AWG105°C11 mm ODCable #RF50595-*M†
Weld FlashImmune, FlameImmune
RSM 46-*M/S824
TC PVC Yellow4x16 AWG90°C9.6 mm ODCable #RF51220-*M†
Tray Rated
RSM 46D-*M/S1062
STOW PVC Yellow4x16 AWG105° C11 mm ODCable #RF50538-*M†
flexlife ® Cable,PVC plug bodywith PVC contactcarriers
RSM 47-*M
STOW PVC Yellow4x16 AWG105°C13.2 mm ODCable #RF50626-*M†
flexlife
1. BN2. WH3. BU4. BK
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RSM .."; "RS .." indicates nylon and "RSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
2, 3 and 4-Wire minifast ® Cordsets, Heavy Duty
• Straight Male Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 V, 9 A
RSM ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E33 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Housing Style Part Number Cable Features Pinout
RSM 55-*M
STOW PVC Yellow5x16 AWG105°C13.2 mm ODCable #RF50540-*M†
flexlife ®
1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BK
RSM 55-*M/S600
SOOW CPE Yellow5x16 AWG105°C13 mm ODCable #RF50597-*M†
Weld FlashImmune, FlameImmune
1. RD2. RD3. GN4. RD5. RD
RSM 56-*M
STOW PVC Yellow5x16 AWG105°C13.2 mm ODCable #RF50539-*M†
flexlife
1. WH2. RD3. GN4. OG5. BK
RSM 56-*M/S1587
STOW TPE Yellow5x16 AWG105°C13.2 mm ODCable #RF51265-*M†
weldlife, WeldFlash Immune
RSM 56D-*M/S1062
STOW PVC Yellow5x16 AWG105° C13.2 mm ODCable #RF50539-*M†
flexlife ® Cable,PVC plug bodywith PVC contactcarriers
RSM 66-*M
STOW PVC Yellow6x16 AWG105°C13.2 mm ODCable #RF50565-*M†
flexlife 1. WH2. RD3. GN4. OG5. BK6. BURSM 66D-*M/S1062
STOW PVC Yellow6x16 AWG105° C13.2 mm ODCable #RF50565-*M†
flexlife ® Cable,PVC plug bodywith PVC contactcarriers
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RSM .."; "RS .." indicates nylon and "RSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
5 and 6-Wire minifast ® Cordsets, Heavy Duty
• Straight Male Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 V, 9 A
RSM ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E34
IndustrialAutomation
Cor
dset
s
Housing Style Part Number Cable Features Pinout
WSM 26-*M
STOW PVC Yellow2x16 AWG105°C10.4 mm ODCable #RF50561-*M†
flexlife ® 1. WH2. BK
WSM 35-*M
STOW PVC Yellow3x16 AWG105°C10.4 mm ODCable #RF50537-*M†
flexlife
1. GN2. RD/BK3. RD/WH
WSM 35-*M/S600
SOOW CPE Yellow3x16 AWG105°C10.3 mm ODCable #RF50596-*M†
Weld FlashImmune, FlameImmune
WSM 36-*M
STOW PVC Yellow3x16 AWG105°C10.4 mm ODCable #RF50536-*M†
flexlife
1. GN2. BK3. WH
WSM 36D-*M/S1062
STOW PVC Yellow4x16 AWG105° C11 mm ODCable #RF50538-*M†
flexlife ® Cable,PVC plug bodywith PVC contactcarriers
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WSM .."; "WS .." indicates nylon and "WSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
2, 3 and 4-Wire minifast ® Cordsets, Heavy Duty
• Right Angle Male Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 VAC/DC, 9 A
WSM ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E35 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Housing Style Part Number Cable Features Pinout
WSM 46-*M
STOW PVC Yellow4x16 AWG105°C11 mm ODCable #RF50538-*M†
flexlife
1. BK2. WH3. RD4. GN
WSM 46-*M/S600
SOOW CPE Yellow4x16 AWG105°C11 mm ODCable #RF50595-*M†
Weld FlashImmune, FlameImmune
WSM 46-*M/S824
TC PVC Yellow4x16 AWG90°C9.6 mm ODCable #RF51220-*M†
Tray Rated
WSM 46D-*M/S1062
STOW PVC Yellow6x16 AWG105° C13.2 mm ODCable #RF50565-*M†
flexlife ® Cable,PVC plug bodywith PVC contactcarriers
WSM 47-*M
STOW PVC Yellow4x16 AWG105°C13.2 mm ODCable #RF50626-*M†
flexlife
1. BN2. WH3. BU4. BK
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WSM .."; "WS .." indicates nylon and "WSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
2, 3 and 4-Wire minifast ® Cordsets, Heavy Duty
• Right Angle Male Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 VAC/DC, 9 A
WSM ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E36
IndustrialAutomation
Cor
dset
s
Housing Style Part Number Cable Features Pinout
WSM 55-*M
STOW PVC Yellow5x16 AWG105°C13.2 mm ODCable #RF50540-*M†
flexlife ®
1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BK
WSM 55-*M/S600
SOOW CPE Yellow5x16 AWG105°C13 mm ODCable #RF50597-*M†
Weld FlashImmune, FlameImmune
1. RD2. RD3. GN4. RD5. RD
WSM 56-*M
STOW PVC Yellow5x16 AWG105°C13.2 mm ODCable #RF50539-*M†
flexlife
1. WH2. RD3. GN4. OG5. BK
WSM 56-*M/S1587
STOW TPE Yellow5x16 AWG105°C13.2 mm ODCable #RF51265-*M†
weldlife, WeldFlash Immune
WSM 56D-*M/S1062
STOW PVC Yellow5x16 AWG105° C13.2 mm ODCable #RF50539-*M†
flexlife ® Cable,PVC plug bodywith PVC contactcarriers
WSM 66-*M
STOW PVC Yellow6x16 AWG105°C13.2 mm ODCable #RF50565-*M†
flexlife 1. WH2. RD3. GN4. OG5. BK6. BUWSM 66D-*M/S1062
STOW PVC Yellow6x16 AWG105° C13.2 mm ODCable #RF50565-*M†
flexlife ® Cable,PVC plug bodywith PVC contactcarriers
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WSM .."; "WS .." indicates nylon and "WSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
5 and 6-Wire minifast ® Cordsets, Heavy Duty
• Right Angle Male Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 VAC/DC, 9 A
WSM ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E37 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Housing Style Part Number Cable Features Pinout
RKM 6B6-*M
ITC PLTC PVC Yellow6x16 AWG105°C9.6 mm ODCable #RF51030-*M†
flexlife ®
1. OG2. BU3. BK4. WH5. RD6. GN
RKM 6B6-*M/S90
AWM PUR Yellow6x16 AWG105°C9.6 mm ODCable #RF51137-*M†
Cut/abrasionImmune
RKM 6B6-*M/S101
AWM TPE Yellow6x16 AWG105°C8.5 mm ODCable #RF51044-*M†
flexlife-10, Highflex - over 10million cycles
RKM 6B6-*M/S600
SOOW CPE Yellow6x16 AWG105°C13.3 mm ODCable #RF51019-*M†
Weld FlashImmune, FlameImmune
RKM 6B6-*M/S1587
AWM PVC Yellow6x16 AWG105°C9.6 mm ODCable #RF51053-*M†
weldlife, Weldflash Immune
RKM 76-*M
ITC PLTC PVC Yellow7x16 AWG105°C9.6 mm ODCable #RF51031-*M†
flexlife
1. WH/BK2. BK3. WH4. RD5. OG6. BU7. GN
RKM 76-*M/S90
ITC PLTC PUR Yellow7x16 AWG105°C9.6 mm ODCable #RF51138-*M†
Cut/abrasionImmune
RKM 76-*M/S101
AWM TPE Yellow7x18 AWG105°C8.4 mm ODCable #RF51049*M†
flexlife-10, Highflex - over 10million cycles
RKM 76-*M/S600
SOOW CPE Yellow7x16 AWG105°C13.3 mm ODCable #RF51020-*M†
Weld FlashImmune, FlameImmune
RKM 76-*M/S1587
AWM PVC Yellow7x16 AWG105°C, 9.6 mm ODCable #RF51009-*M†
weldlife, Weldflash Immune
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RKM .."; "RKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
6 and 7-Wire minifast ® Cordsets, "B" Style Heavy Duty
RKM ..
• Straight Female Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 VAC/DC, 8 A
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E38
IndustrialAutomation
Cor
dset
s
Housing Style Part Number Cable Features Pinout
RKM 86-*M
ITC PLTC PVC Yellow8x16 AWG105°C11.2 mm ODCable #RF51032-*M†
flexlife ®
1. OG2. BU3. WH/BK4. BK5. WH6. RD7. GN8. RD/BK
RKM 86-*M/S90
ITC/PLTC PUR Yellow8x16 AWG105°C11.2 mm ODCable #RF51139-*M†
Cut/abrasionImmune
RKM 86-*M/S101
AWM TPE Yellow8x16105°C9.6 mm ODCable #RF51050-*M†
flexlife-10, Highflex - over 10million cycles
RKM 86-*M/S600
SOOW CPE Yellow8x16 AWG105°C14.4 mm ODCable #RF50976-*M†
Weld FlashImmune, FlameImmune
RKM 86-*M/S1587
AWM TPE Yellow8x16 AWG105°C10.5 mm ODCable #RF51011-*M†
weldlife, Weldflash Immune
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RKM .."; "RKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
8-Wire minifast ® Cordsets, "B" Style Heavy Duty
• Straight Female Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 VAC/DC, 8 A
RKM ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E39 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Housing Style Part Number Cable Features Pinout
WKM 6B6-*M
ITC PLTC PVC Yellow6x16 AWG105°C9.6 mm ODCable #RF51030-*M†
flexlife ®
1. OG2. BU3. BK4. WH5. RD6. GN
WKM 6B6-*M/S90
AWM PUR Yellow6x16 AWG105°C9.6 mm ODCable #RF51137-*M†
Cut/abrasionImmune
WKM 6B6-*M/S101
AWM TPE Yellow6x16 AWG105°C8.5 mm ODCable #RF51044-*M†
flexlife-10, Highflex - over 10million cycles
WKM 6B6-*M/S600
SOOW CPE Yellow6x16 AWG105°C13.3 mm ODCable #RF51019-*M†
Weld FlashImmune, FlameImmune
WKM 6B6-*M/S1587
AWM PVC Yellow6x16 AWG105°C9.6 mm ODCable #RF51053-*M†
weldlife, Weldflash Immune
WKM 76-*M
ITC PLTC PVC Yellow7x16 AWG105°C9.6 mm ODCable #RF51031-*M†
flexlife
1. WH/BK2. BK3. WH4. RD5. OG6. BU7. GN
WKM 76-*M/S90
ITC PLTC PUR Yellow7x16 AWG105°C9.6 mm ODCable #RF51138-*M†
Cut/abrasionImmune
WKM 76-*M/S101
AWM TPE Yellow7x18 AWG105°C8.4 mm ODCable #RF51049*M†
flexlife-10, Highflex - over 10million cycles
WKM 76-*M/S600
SOOW CPE Yellow7x16 AWG105°C13.3 mm ODCable #RF51020-*M†
Weld FlashImmune, FlameImmune
WKM 76-*M/S1587
AWM PVC Yellow7x16 AWG105°C, 9.6 mm ODCable #RF51009-*M†
weldlife, Weldflash Immune
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WKM .."; "WKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
6 and 7-Wire minifast ® Cordsets, "B" Style Heavy Duty Body
• Right Angle Female Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 VAC/DC, 8 A
WKM ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E40
IndustrialAutomation
Cor
dset
s
Housing Style Part Number Cable Features Pinout
WKM 86-*M
ITC PLTC PVC Yellow8x16 AWG105°C11.2 mm ODCable #RF51032-*M†
flexlife ®
1. OG2. BU3. WH/BK4. BK5. WH6. RD7. GN8. RD/BK
WKM 86-*M/S90
ITC/PLTC PUR Yellow8x16 AWG105°C11.2 mm ODCable #RF51139-*M†
Cut/abrasionImmune
WKM 86-*M/S101
AWM TPE Yellow8x16105°C9.6 mm ODCable #RF51050-*M†
flexlife-10, Highflex - over 10million cycles
WKM 86-*M/S600
SOOW CPE Yellow8x16 AWG105°C14.4 mm ODCable #RF50976-*M†
Weld FlashImmune, FlameImmune
WKM 86-*M/S1587
AWM TPE Yellow8x16 AWG105°C10.5 mm ODCable #RF51011-*M†
weldlife, Weldflash Immune
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WKM .."; "WKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
8-Wire minifast ® Cordsets, "B" Style Heavy Duty
• Right Angle Female Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 VAC/DC, 8 A
WKM ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E41 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Housing Style Part Number Cable Features Pinout
RSM 6B6-*M
ITC PLTC PVC Yellow6x16 AWG105°C9.6 mm ODCable #RF51030-*M†
flexlife ®
1. OG2. BU3. BK4. WH5. RD6. GN
RSM 6B6-*M/S90
AWM PUR Yellow6x16 AWG105°C9.6 mm ODCable #RF51137-*M†
Cut/abrasionImmune
RSM 6B6-*M/S101
AWM TPE Yellow6x16 AWG105°C8.5 mm ODCable #RF51044-*M†
flexlife-10, Highflex - over 10million cycles
RSM 6B6-*M/S600
SOOW CPE Yellow6x16 AWG105°C13.3 mm ODCable #RF51019-*M†
Weld FlashImmune, FlameImmune
RSM 6B6-*M/S1587
AWM PVC Yellow6x16 AWG105°C9.6 mm ODCable #RF51053-*M†
weldlife, Weldflash Immune
RSM 76-*M
ITC PLTC PVC Yellow7x16 AWG105°C9.6 mm ODCable #RF51031-*M†
flexlife
1. WH/BK2. BK3. WH4. RD5. OG6. BU7. GN
RSM 76-*M/S90
ITC PLTC PUR Yellow7x16 AWG105°C9.6 mm ODCable #RF51138-*M†
Cut/abrasionImmune
RSM 76-*M/S101
AWM TPE Yellow7x18 AWG105°C8.4 mm ODCable #RF51049*M†
flexlife-10, Highflex - over 10million cycles
RSM 76-*M/S600
SOOW CPE Yellow7x16 AWG105°C13.3 mm ODCable #RF51020-*M†
Weld FlashImmune, FlameImmune
RSM 76-*M/S1587
AWM PVC Yellow7x16 AWG105°C, 9.6 mm ODCable #RF51009-*M†
weldlife, Weldflash Immune
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RSM .."; "RSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
6 and 7-Wire minifast ® Cordsets, "B" Style Heavy Duty
• Straight Male Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 VAC/DC, 8 A
RSM ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E42
IndustrialAutomation
Cor
dset
s
Housing Style Part Number Cable Features Pinout
RSM 86-*M
ITC PLTC PVC Yellow8x16 AWG105°C11.2 mm ODCable #RF51032-*M†
flexlife ®
1. OG2. BU3. WH/BK4. BK5. WH6. RD7. GN8. RD/BK
RSM 86-*M/S90
ITC/PLTC PUR Yellow8x16 AWG105°C11.2 mm ODCable #RF51139-*M†
Cut/abrasionImmune
RSM 86-*M/S101
AWM TPE Yellow8x16105°C9.6 mm ODCable #RF51050-*M†
flexlife-10, Highflex - over 10million cycles
RSM 86-*M/S600
SOOW CPE Yellow8x16 AWG105°C14.4 mm ODCable #RF50976-*M†
Weld FlashImmune, FlameImmune
RSM 86-*M/S1587
AWM TPE Yellow8x16 AWG105°C10.5 mm ODCable #RF51011-*M†
weldlife, Weldflash Immune
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RSM .."; "RSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
8-Wire minifast ® Cordsets, "B" Style Heavy Duty
• Straight Male Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 VAC/DC, 8 A
RSM ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E43 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Housing Style Part Number Cable Features Pinout
WSM 6B6-*M
ITC PLTC PVC Yellow6x16 AWG105°C9.6 mm ODCable #RF51030-*M†
flexlife ®
1. OG2. BU3. BK4. WH5. RD6. GN
WSM 6B6-*M/S90
AWM PUR Yellow6x16 AWG105°C9.6 mm ODCable #RF51137-*M†
Cut/abrasionImmune
WSM 6B6-*M/S101
AWM TPE Yellow6x16 AWG105°C8.5 mm ODCable #RF51044-*M†
flexlife-10, Highflex - over 10million cycles
WSM 6B6-*M/S600
SOOW CPE Yellow6x16 AWG105°C13.3 mm ODCable #RF51019-*M†
Weld FlashImmune, FlameImmune
WSM 6B6-*M/S1587
AWM PVC Yellow6x16 AWG105°C9.6 mm ODCable #RF51053-*M†
weldlife, Weldflash Immune
WSM 76-*M
ITC PLTC PVC Yellow7x16 AWG105°C9.6 mm ODCable #RF51031-*M†
flexlife
1. WH/BK2. BK3. WH4. RD5. OG6. BU7. GN
WSM 76-*M/S90
ITC PLTC PUR Yellow7x16 AWG105°C9.6 mm ODCable #RF51138-*M†
Cut/abrasionImmune
WSM 76-*M/S101
AWM TPE Yellow7x18 AWG105°C8.4 mm ODCable #RF51049*M†
flexlife-10, Highflex - over 10million cycles
WSM 76-*M/S600
SOOW CPE Yellow7x16 AWG105°C13.3 mm ODCable #RF51020-*M†
Weld FlashImmune, FlameImmune
WSM 76-*M/S1587
AWM PVC Yellow7x16 AWG105°C, 9.6 mm ODCable #RF51009-*M†
weldlife, Weldflash Immune
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WSM .."; "WSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
6 and 7-Wire minifast ® Cordsets, "B" Style Heavy Duty
• Right Angle Male Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 VAC/DC, 8 A
WSM ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E44
IndustrialAutomation
Cor
dset
s
Housing Style Part Number Cable Features Pinout
WSM 86-*M
ITC PLTC PVC Yellow8x16 AWG105°C11.2 mm ODCable #RF51032-*M†
flexlife ®
1. OG2. BU3. WH/BK4. BK5. WH6. RD7. GN8. RD/BK
WSM 86-*M/S90
ITC/PLTC PUR Yellow8x16 AWG105°C11.2 mm ODCable #RF51139-*M†
Cut/abrasionImmune
WSM 86-*M/S101
AWM TPE Yellow8x16105°C9.6 mm ODCable #RF51050-*M†
flexlife-10, Highflex - over 10million cycles
WSM 86-*M/S600
SOOW CPE Yellow8x16 AWG105°C14.4 mm ODCable #RF50976-*M†
Weld FlashImmune, FlameImmune
WSM 86-*M/S1587
AWM TPE Yellow8x16 AWG105°C10.5 mm ODCable #RF51011-*M†
weldlife, Weldflash Immune
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WSM .."; "WSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
8-Wire minifast ® Cordsets, "B" Style Heavy Duty
• Right Angle Male Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 VAC/DC, 8 A
WSM ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E45 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Housing Style Part Number Cable Features Pinout
RKM 96-*M
ITC PLTC PVC Yellow9x16 AWG105°C12.5 mm ODCable #RF51033-*M†
flexlife ®
1. OG2. BU3. RD/BK4. GN/BK5. WH6. RD7. GN8. WH/BK9. BK
RKM 96-*M/S90
ITC PLTC PUR Yellow9x16 AWG105°C12.5 mm ODCable #RF51140-*M†
Cut/abrasionImmune
RKM 96-*M/S101
AWM TPE Yellow9x16 AWG105°C10.5 mm ODCable #RF51051-*M†
flexlife-10, Highflex - over 10million cycles
RKM 96-*M/S600
SOOW CPE Yellow9x16 AWG105°C15.2 mm ODCable #RF51021-*M†
Weld FlashImmune, FlameImmune
RKM 96-*M/S1587
AWM TPE Yellow9x16 AWG105°C11.2 mm ODCable #RF51013-*M†
weldlife, Weldflash Immune
RKM 106-*M
ITC PLTC PVC Yellow10x16 AWG105°C12.5 mm ODCable #RF51034-*M†
flexlife
1. OG2. BU3. WH/BK4. RD/BK5. GN/BK6. OG/BK7. RD8. GN9. BK10. WH
RKM 106-*M/S90
ITC/PLTC Yellow10x16 AWG105°C12.5 mm ODCable #RF51141-*M†
Cut/abrasionImmune
RKM 106-*M/S101
AWM TPE Yellow10x16 AWG105°C10.5 mm ODCable #RF51052-*M†
flexlife-10, Highflex - over 10million cycles
RKM 106-*M/S600
SOOW CPE Yellow10x16 AWG105°C15.7 mm ODCable #RF51022-*M†
Weld FlashImmune, FlameImmune
RKM 106-*M/S1587
AWM TPE Yellow10x16 AWG105°C12.5 mm ODCable #RF51015-*M†
weldlife, Weldflash Immune
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RKM .."; "RKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
9 and 10-Wire minifast ® Cordsets, "C" Style Heavy Duty
RKM ..
• Straight Female Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 VAC/DC, 7 A
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E46
IndustrialAutomation
Cor
dset
s
Housing Style Part Number Cable Features Pinout
RKM 126-*M
ITC PLTC PVC Yellow12x16 AWG105°C13.2 mm ODCable #RF51035-*M†
flexlife ®
1. OG2. BU3. WH/BK4. RD/BK5. GN/BK6. OG/BK7. BU/BK8. BK/WH9. GN10. RD11. WH12. BK
RKM 126-*M/S90
ITC/PLTC PUR Yellow12x16 AWG105°C13.2 mm ODCable #RF51142-*M†
Cut/abrasionImmune
RKM 126-*M/S101
AWM TPE Yellow12x16 AWG105°C11.2 mm ODCable #RF51148-*M†
flexlife-10, Highflex - over 10million cycles
RKM 126-*M/S600
SOOW CPE Yellow12x16 AWG105°C16.5 mm ODCable #RF51023-*M†
Weld FlashImmune, FlameImmune
RKM 126-*M/S1587
AWM TPE Yellow12x16 AWG105°C12.5 mm ODCable #RF51017-*M†
weldlife, Weldflash Immune
RKM 126-*M/S1052/S1587
AWM TPE Grey12x16 AWG105°C12.5 mm ODCable #RF51275-*M†
weldlife, Weldflash Immune
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RKM .."; "RKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
12-Wire minifast ® Cordsets, "C" Style Heavy Duty
• Straight Female Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 VAC/DC, 7 A
RKM ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E47 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Housing Style Part Number Cable Features Pinout
WKM 96-*M
ITC PLTC PVC Yellow9x16 AWG105°C12.5 mm ODCable #RF51033-*M†
flexlife ®
1. OG2. BU3. RD/BK4. GN/BK5. WH6. RD7. GN8. WH/BK9. BK
WKM 96-*M/S90
ITC PLTC PUR Yellow9x16 AWG105°C12.5 mm ODCable #RF51140-*M†
Cut/abrasionImmune
WKM 96-*M/S101
AWM TPE Yellow9x16 AWG105°C10.5 mm ODCable #RF51051-*M†
flexlife-10, Highflex - over 10million cycles
WKM 96-*M/S600
SOOW CPE Yellow9x16 AWG105°C15.2 mm ODCable #RF51021-*M†
Weld FlashImmune, FlameImmune
WKM 96-*M/S1587
AWM TPE Yellow9x16 AWG105°C11.2 mm ODCable #RF51013-*M†
weldlife, Weldflash Immune
WKM 106-*M
ITC PLTC PVC Yellow10x16 AWG105°C12.5 mm ODCable #RF51034-*M†
flexlife
1. OG2. BU3. WH/BK4. RD/BK5. GN/BK6. OG/BK7. RD8. GN9. BK10. WH
WKM 106-*M/S90
ITC/PLTC Yellow10x16 AWG105°C12.5 mm ODCable #RF51141-*M†
Cut/abrasionImmune
WKM 106-*M/S101
AWM TPE Yellow10x16 AWG105°C10.5 mm ODCable #RF51052-*M†
flexlife-10, Highflex - over 10million cycles
WKM 106-*M/S600
SOOW CPE Yellow10x16 AWG105°C15.7 mm ODCable #RF51022-*M†
Weld FlashImmune, FlameImmune
WKM 106-*M/S1587
AWM TPE Yellow10x16 AWG105°C12.5 mm ODCable #RF51015-*M†
weldlife, Weldflash Immune
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WKM .."; "WKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
9 and 10-Wire minifast ® Cordsets, "C" Style Heavy Duty
WKM ..
• Right Angle Female Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 VAC/DC, 7 A
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E48
IndustrialAutomation
Cor
dset
s
Housing Style Part Number Cable Features Pinout
WKM 126-*M
ITC PLTC PVC Yellow12x16 AWG105°C13.2 mm ODCable #RF51035-*M†
flexlife ®
1. OG2. BU3. WH/BK4. RD/BK5. GN/BK6. OG/BK7. BU/BK8. BK/WH9. GN10. RD11. WH12. BK
WKM 126-*M/S90
ITC/PLTC PUR Yellow12x16 AWG105°C13.2 mm ODCable #RF51142-*M†
Cut/abrasionImmune
WKM 126-*M/S101
AWM TPE Yellow12x16 AWG105°C11.2 mm ODCable #RF51148-*M†
flexlife-10, Highflex - over 10million cycles
WKM 126-*M/S600
SOOW CPE Yellow12x16 AWG105°C16.5 mm ODCable #RF51023-*M†
Weld FlashImmune, FlameImmune
WKM 126-*M/S1587
AWM TPE Yellow12x16 AWG105°C12.5 mm ODCable #RF51017-*M†
weldlife, WeldFlash Immune
WKM 126-*M/S1052/S1587
AWM TPE Grey12x16 AWG105°C12.5 mm ODCable #RF51275-*M†
weldlife, WeldFlash Immune
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WKM .."; "WKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
12-Wire minifast ® Cordsets, "C" Style Heavy Duty
WKM ..
• Right Angle Female Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 VAC/DC, 7 A
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E49 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Housing Style Part Number Cable Features Pinout
RSM 96-*M
ITC PLTC PVC Yellow9x16 AWG105°C12.5 mm ODCable #RF51033-*M†
flexlife ®
1. OG2. BU3. RD/BK4. GN/BK5. WH6. RD7. GN8. WH/BK9. BK
RSM 96-*M/S90
ITC PLTC PURYellow9x16 AWG105°C12.5 mm ODCable #RF51140-*M†
Cut/abrasionImmune
RSM 96-*M/S101
AWM TPE Yellow9x16 AWG105°C10.5 mm ODCable #RF51051-*M†
flexlife-10, Highflex - over 10million cycles
RSM 96-*M/S600
SOOW CPE Yellow9x16 AWG105°C15.2 mm ODCable #RF51021-*M†
Weld FlashImmune, FlameImmune
RSM 96-*M/S1587
AWM TPE Yellow9x16 AWG105°C11.2 mm ODCable #RF51013-*M†
weldlife, Weldflash Immune
RSM 106-*M
ITC PLTC PVC Yellow10x16 AWG105°C12.5 mm ODCable #RF51034-*M†
flexlife
1. OG2. BU3. WH/BK4. RD/BK5. GN/BK6. OG/BK7. RD8. GN9. BK10. WH
RSM 106-*M/S90
ITC/PLTC Yellow10x16 AWG105°C12.5 mm ODCable #RF51141-*M†
Cut/abrasionImmune
RSM 106-*M/S101
AWM TPE Yellow10x16 AWG105°C10.5 mm ODCable #RF51052-*M†
flexlife-10, Highflex - over 10million cycles
RSM 106-*M/S600
SOOW CPE Yellow10x16 AWG105°C15.7 mm ODCable #RF51022-*M†
Weld FlashImmune, FlameImmune
RSM 106-*M/S1587
AWM TPE Yellow10x16 AWG105°C12.5 mm ODCable #RF51015-*M†
weldlife, Weldflash Immune
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RSM .."; "RSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
9 and 10-Wire minifast ® Cordsets, "C" Style Heavy Duty
RSM ..
• Straight Male Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 VAC/DC, 7 A
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E50
IndustrialAutomation
Cor
dset
s
Housing Style Part Number Cable Features Pinout
RSM 126-*M
ITC PLTC PVC Yellow12x16 AWG105°C13.2 mm ODCable #RF51035-*M†
flexlife ®
1. OG2. BU3. WH/BK4. RD/BK5. GN/BK6. OG/BK7. BU/BK8. BK/WH9. GN10. RD11. WH12. BK
RSM 126-*M/S90
ITC/PLTC PUR Yellow12x16 AWG105°C13.2 mm ODCable #RF51142-*M†
Cut/abrasionImmune
RSM 126-*M/S101
AWM TPE Yellow12x16 AWG105°C11.2 mm ODCable #RF51148-*M†
flexlife-10, Highflex - over 10million cycles
RSM 126-*M/S600
SOOW CPE Yellow12x16 AWG105°C16.5 mm ODCable #RF51023-*M†
Weld FlashImmune, FlameImmune
RSM 126-*M/S1587
AWM TPE Yellow12x16 AWG105°C12.5 mm ODCable #RF51017-*M†
weldlife, WeldFlash Immune
RSM 126-*M/S1052/S1587
AWM TPE Grey12x16 AWG105°C12.5 mm ODCable #RF51275-*M†
weldlife, WeldFlash Immune
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RSM .."; "RSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
12-Wire minifast ® Cordsets, "C" Style Heavy Duty
RSM ..
• Straight Male Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 VAC/DC, 7 A
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E51 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Housing Style Part Number Cable Features Pinout
WSM 96-*M
ITC PLTC PVC Yellow9x16 AWG105°C12.5 mm ODCable #RF51033-*M†
flexlife ®
1. OG2. BU3. RD/BK4. GN/BK5. WH6. RD7. GN8. WH/BK9. BK
WSM 96-*M/S90
ITC PLTC PUR Yellow9x16 AWG105°C12.5 mm ODCable #RF51140-*M†
Cut/abrasionImmune
WSM 96-*M/S101
AWM TPE Yellow9x16 AWG105°C10.5 mm ODCable #RF51051-*M†
flexlife-10, Highflex - over 10million cycles
WSM 96-*M/S600
SOOW CPE Yellow9x16 AWG105°C15.2 mm ODCable #RF51021-*M†
Weld FlashImmune, FlameImmune
WSM 96-*M/S1587
AWM TPE Yellow9x16 AWG105°C11.2 mm ODCable #RF51013-*M†
weldlife, Weldflash Immune
WSM 106-*M
ITC PLTC PVC Yellow10x16 AWG105°C12.5 mm ODCable #RF51034-*M†
flexlife
1. OG2. BU3. WH/BK4. RD/BK5. GN/BK6. OG/BK7. RD8. GN9. BK10. WH
WSM 106-*M/S90
ITC/PLTC Yellow10x16 AWG105°C12.5 mm ODCable #RF51141-*M†
Cut/abrasionImmune
WSM 106-*M/S101
AWM TPE Yellow10x16 AWG105°C10.5 mm ODCable #RF51052-*M†
flexlife-10, Highflex - over 10million cycles
WSM 106-*M/S600
SOOW CPE Yellow10x16 AWG105°C15.7 mm ODCable #RF51022-*M†
Weld FlashImmune, FlameImmune
WSM 106-*M/S1587
AWM TPE Yellow10x16 AWG105°C12.5 mm ODCable #RF51015-*M†
weldlife, Weldflash Immune
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WSM .."; "WSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
WSM ..
9 and 10-Wire minifast ® Cordsets, "C" Style Heavy Duty
• Right Angle Male Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 VAC/DC, 7 A
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E52
IndustrialAutomation
Cor
dset
s
Housing Style Part Number Cable Features Pinout
WSM 126-*M
ITC PLTC PVC Yellow12x16 AWG105°C13.2 mm ODCable #RF51035-*M†
flexlife ®
1. OG2. BU3. WH/BK4. RD/BK5. GN/BK6. OG/BK7. BU/BK8. BK/WH9. GN10. RD11. WH12. BK
WSM 126-*M/S90
ITC/PLTC PUR Yellow12x16 AWG105°C13.2 mm ODCable #RF51142-*M†
Cut/abrasionImmune
WSM 126-*M/S101
AWM TPE Yellow12x16 AWG105°C11.2 mm ODCable #RF51148-*M†
flexlife-10, Highflex - over 10million cycles
WSM 126-*M/S600
SOOW CPE Yellow12x16 AWG105°C16.5 mm ODCable #RF51023-*M†
Weld FlashImmune, FlameImmune
WSM 126-*M/S1587
AWM TPE Yellow12x16 AWG105°C12.5 mm ODCable #RF51017-*M†
weldlife, Weldflash Immune
WSM 126-*M/S1052/S1587
AWM TPE Grey12x16 AWG105°C12.5 mm ODCable #RF51275-*M†
weldlife, WeldFlash Immune
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WSM .."; "WSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
WSM ..
12-Wire minifast ® Cordsets, "C" Style Heavy Duty
• Right Angle Male Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 VAC/DC, 7 A
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E53 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
2-6 Wire minifast ® Extreme Duty, Armored Cordsets
• Straight Female Connectors
• Shield to Coupling Nut
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 V, 9 A
Housing Style Part Number Cable Features Pinout
RKM 28A-*M
MC ITC PLTC PVCArmor Yellow2x18 AWG90°C13.5 mm ODCable #RF51039-*M†
Armor Cable forExtremeConditions
1. WH2. BK
RKM 38A-*M
MC ITC PLTC PVCArmor Yellow3x18 AWG90°C13.5 mm ODCable #RF51040-*M†
Armor Cable forExtremeConditions
1. GN2. BK3. WH
RKM 48A-*M
MC ITC PLTC PVCArmor Yellow4x18 AWG90°C13.5 mm ODCable #RF51041-*M†
Armor Cable forExtremeConditions
1. BK2. WH3. RD4. GN
RKM 58A-*M
MC PVC ArmorYellow5x18 AWG90°C12.2 mm ODCable #RF51042-*M†
Armor Cable forExtremeConditions
1. WH2. RD3. GN4. OG5. BK
RKM 68A-*M
MC PVC ArmorYellow6x18 AWG90°C13 mm ODCable #RF51043-*M†
Armor Cable forExtremeConditions
1. WH2. RD3. GN4. OG5. BK6. BU
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RKM .."; "RKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
RKM ..A
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E54
IndustrialAutomation
Cor
dset
s
Housing Style Part Number Cable Features Pinout
RSM 28A-*M
ITC PLTC PVC ArmorYellow2x18 AWG90°C13.5 mm ODCable #RF51039-*M†
Armor Cablefor ExtremeConditions
1. WH2. BK
RSM 38A-*M
ITC PLTC PVC ArmorYellow3x18 AWG90°C13.5 mm ODCable #RF51040-*M†
1. GN2. BK3. WH
RSM 48A-*M
ITC PLTC PVC ArmorYellow4x18 AWG90°C13.5 mm ODCable #RF51041-*M†
1. BK2. WH3. RD4. GN
RSM 58A-*M
AWM PVC ArmorYellow5x18 AWG90°C12.2 mm ODCable #RF51042-*M†
1. WH2. RD3. GN4. OG5. BK
RSM 68A-*M
AWM PVC ArmorYellow6x18 AWG90°C13.0 mm ODCable #RF51043-*M†
1. WH2. RD3. GN4. OG5. BK6. BU
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RSM .."; "RSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
RSM ..A
2-6 Wire minifast ® Extreme Duty, Armored Cordsets
• Straight Male Connectors
• Shield to Coupling Nut
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 V, 9 A
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E55 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
2-5 Wire minifast ® Cordsets, Smooth Body
Housing Style Part Number Cable Features Pinout
RKM 26D-*M
STOW PVC Yellow2x16 AWG105°C10.4 mm ODCable #RF50561-*M†
flexlife ® 1. WH2. BK
RKM 35D-*M
STOW PVC Yellow3x16 AWG105°C10.4 mm ODCable #RF50537-*M†
flexlife1. GN2. RD/BK3. RD/WH
RKM 36D-*M
STOW PVC Yellow3x16 AWG105°C10.4 mm ODCable #RF50536-*M†
flexlife1. GN2. BK3. WH
RKM 46D-*M
STOW PVC Yellow4x16 AWG105°C11 mm ODCable #RF50538-*M†
flexlife
1. BK2. WH3. RD4. GN
RKM 56D-*M
STOW PVC Yellow5x16 AWG105°C13.2 mm ODCable #RF50539-*M†
flexlife
1. WH2. RD3. GN4. OG5. BK
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RKM .."; "RKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
• Straight Female Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 V, 9 A
RKM ..D
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E56
IndustrialAutomation
Cor
dset
s
Housing Style Part Number Cable Features Pinout
RSM 26D-*M
STOW PVC Yellow2x16 AWG105°C10.4 mm ODCable #RF50561-*M†
flexlife ® 1. WH2. BK
RSM 35D-*M
STOW PVC Yellow3x16 AWG105°C10.4 mm ODCable #RF50537-*M†
flexlife1. GN2. RD/BK3. RD/WH
RSM 36D-*M
STOW PVC Yellow3x16 AWG105°C10.4 mm ODCable #RF50536-*M†
flexlife1. GN2. BK3. WH
RSM 46D-*M
STOW PVC Yellow4x16 AWG105°C11 mm ODCable #RF50538-*M†
flexlife
1. BK2. WH3. RD4. GN
RSM 56D-*M
STOW PVC Yellow5x16 AWG105°C13.2 mm ODCable #RF50539-*M†
flexlife
1. WH2. RD3. GN4. OG5. BK
* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RSM .."; "RS .." indicates nylon and "RSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.
RSM ..D
2-5 Wire minifast ® Cordsets, Smooth Body
• Straight Male Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 V, 9 A
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E57 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Housing Style Part Number Cable Application Pinout
RKM 30-2M/S90-SP
AWM PUR Yellow3X18 AWG105° C300 V9 A7.3 mm OD
For repetitive 2-wireAC with ground or3-wire applications
1. GN/YE2. BN3. BU
RKM 50-1M/S90-SP
AWM PUR Yellow5X18 AWG105° C300 V, 9 A7.3 mm OD
For repetitive 5-wireAC applications
1. BK2. BU3. GN/YE4. BN5. WH
WKM 30-2M/S90-SP
AWM PUR Yellow3X18 AWG105° C300 V9 A7.3 mm OD
For repetitive 2-wireAC with ground or3-wire applications
1. GN/YE2. BN3. BU
WKM 50-1M/S90-SP
AWM PUR Yellow5X18 AWG105° C300 V, 9 A7.3 mm OD
For repetitive 5-wireAC applications
1. BK2. BU3. GN/YE4. BN5. WH
* Length in meters. Standard cable lengths are 2, 4, 6, 8 and 10 meters. Consult factory for other lengths.Standard coulpling nut material is nickel plated brass .. "RKM (WKM) .."; "RKV (WKV) .." indicates 316 stainless steel.
• Straight and Right Angle FemaleConnectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 300 V, 9 A
3 and 5-Wire minifast ® Spiral Cordsets, Standard
WKM ..
RKM ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E58
IndustrialAutomation
Cor
dset
s
Housing Style Part Number Cable Application Pinout
RSM 30-2M/S90-SP
AWM PUR Yellow3X18 AWG105° C300 V,9 A7.3 mm OD
For repetitive2-wire AC withground or 3-wireapplications
1. GN/YE2. BN3. BU
RSM 50-1M/S90-SP
AWM PUR Yellow5X18 AWG105° C300 V, 9 A7.3 mm OD
For repetitive5-wire ACapplications
1. BK2. BU3. GN/YE4. BN5. WH
WSM 30-2M/S90-SP
AWM PUR Yellow3X18 AWG105° C300 V9 A7.3 mm OD
For repetitive2-wire AC withground or 3-wireapplications
1. GN/YE2. BN3. BU
WSM 50-1M/S90-SP
AWM PUR Yellow5X18 AWG105° C300 V, 9 A7.3 mm OD
For repetitive5-wire ACapplications
1. BK2. BU3. GN/YE4. BN5. WH
* Length in meters. Standard cable lengths are 2, 4, 6, 8 and 10 meters. Consult factory for other lengths.Standard coulpling nut material is nickel plated brass .. "RSM (WSM) .."; "RSV (WSV) .." indicates 316 stainless steel.
• Straight and Right Angle MaleConnectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 300 V, 9 A
3 and 5-Wire minifast ® Spiral Cordsets, Standard
WSM ..
RSM ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E59 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
minifast ® Standard Male Receptacles NPSM and NPT
minifast ® "B" Style Male Receptacles 1/2-14NPT and 3/4-14NPT
minifast ® "C" Style Female Receptacles 1/2-14NPT and 3/4-14NPT
1
RSF .. Page E63 - E66
5
"C" Style RSF ..1/2-14NPT Page E77
3
"B" Style RSF ..1/2-14NPT Page E76
2
RSF ..NPT Page E71 - E73
6
"C" Style RSF ..3/4-14NPT Page E77
4
"B" Style RSF ..3/4-14NPT Page E76
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E60
IndustrialAutomation
Rece
ptac
les
9
RSF ..M20 Page E74 - E75
11
"B" Style RKF ..1/2-14NPT Page E83
minifast ® Standard Female Receptacles NPSM and NPT
minifast ® "B" Style Female Receptacles 1/2-14NPT and 3/4-14NPT
12
"B" Style RKF ..3/4-14NPT Page E83
10
RKF ..M20 Page E81 - E82
minifast ® Standard Female Receptacles M20
7
RKF .. Page E67 - E70
8
RKF ..NPT Page E78 - E80
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E61 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
RKFP CutoutRSFP Cutout
minifast ® 16 AWG Back Panel Mount Male and Female Receptacles
16
RKFP .. Page E88 - E90
15
RSFP .. Page E85 - E87
13
"C" Style RKF ...1/2-14NPT Page E84
14
"C" Style RKF ..3/4-14NPT Page E84
minifast ® "C" Style Female Receptacles 1/2-14NPT and 3/4-14NPT
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E62
IndustrialAutomation
Rece
ptac
les
RSF RKF .. Page E93
21
minifast ® Bulkhead Feed-thru Receptacles
17
RSF ..PCB Page E91
18
RSFL .. Page E91
19
RKF ..PCB Page E92
minifast ® Front PCB Mount Male and Female Receptacles
20
RKFL .. Page E92
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E63 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
2 and 3-Wire minifast ® Receptacles, Front Mount, 1/2-14 NPSM Threads
Drawing Number Part Number Lead Specs. Features Pinout
RSF 20-*M
UL, CSA2x18 AWG105°C600 V, 9 A
1/2-14NPSMThreads,Standard Duty
1. BN2. BU
RSF 26-*M
UL, CSA2x16 AWG Leads105°C600 V, 9 A
1/2-14NPSMThreads,Heavy Duty
1. WH2. BK
RSF 28-*M
UL, CSA2x18 AWG105°C600 V, 9 A
1/2-14 NPSMThreads, HeavyDuty
1. WH2. BK
RSF 30-*M
UL, CSA3x18 AWG105°C600 V, 9 A
1/2-14NPSMThreads,Standard Duty
1. GY/YE2. BN3. BU
RSF 31-*M
UL, CSA3x18 AWG105°C600 V, 9 A
1/2-14NPSMThreads,Standard Duty 1. BK
2. BN3. BU
RSF 31-*M/S849
UL, CSA3x22 AWG105°C300 V, 9 A
1/2-14NPSMThreads,Standard Duty
RSF 311-*M
UL, CSA3x18 AWG105°C600 V, 9 A
Automotive ColorCode1/2-14NPSMThreads
1. GN2. RD/BK3. RD/WH
RSF 311-*M/S849
UL, CSA3x22 AWG105°C300 V, 9 A
Automotive ColorCode1/2-14NPSMThreads
RSF 35-*M
UL, CSA3x16 AWG105°C600 V, 9 A
Automotive ColorCode1/2-14NPSMThreads
RSF 36-*M
UL, CSA3x16 AWG105°C600 V, 9 A
1/2-14 NPSMThreads, HeavyDuty
1. GN2. BK3. WH
RSF 38-*M
UL, CSA3x18 AWG105°C600 V, 9 A
1/2-14 NPSMThreads, HeavyDuty
1. GN2. BK3. WH
See page E59 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RSF .."; "RSFV .." indicates 316 stainless steel housing (leads only)and "RSFK .." indicates nylon housing.For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.
1
RSF ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E64
IndustrialAutomation
Rece
ptac
les
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
4-Wire minifast ® Receptacles, Front Mount, 1/2-14 NPSM Threads
Drawing Number Part Number Lead Specs. Features Pinout
RSF 40-*M
UL, CSA4x18 AWG105°C600 V, 9 A
1/2-14 NPSMThreads, StandardDuty
1. BN2. WH3. BU4. BK
RSF 40-*M/S658
UL, CSA4x18 AWG105°C300 V, 9 A
RSF 40-*M/S849
UL, CSA4x22 AWG105°C300 V, 9 A
RSF 46-*M
UL, CSA4x16 AWG105°C600 V, 9 A
1/2-14 NPSMThreads, HeavyDuty
1. BK2. WH3. RD4. GN
RSF 48-*M
UL, CSA4x18 AWG105°C600 V, 9 A
1/2-14 NPSMThreads, StandardDuty
See page E59 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RSF .."; "RSFV .." indicates 316 stainless steel housing (leads only)and "RSFK .." indicates nylon housing.For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.
1
RSF ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E65 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Drawing Number Part Number Lead Specs. Features Pinout
RSF 50-*M
UL, CSA5x18 AWG105°C600 V, 9 A 1/2-14NPSM
Threads,Standard Duty
1. BK2. BU3. GN/YE4. BN5. WHRSF 50-*M/S849
UL, CSA5x22 AWG105°C300 V, 9 A
RSF 511-*M
UL, CSA5x18 AWG105°C600 V, 9 A
Automotive ColorCode1/2-14NPSMThreads
1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BKRSF 511-*M/S849
UL, CSA5x22 AWG105°C300 V, 9 A
RSF 55-*M
UL, CSA5x16 AWG105°C600 V, 9 A
Automotive ColorCode1/2-14NPSMThreads
1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BK
RSF 56-*M
UL, CSA5x16 AWG105°C600 V, 9 A
1/2-14NPSMThreads,Heavy Duty
1. WH2. RD3. GN4. OG5. BK
RSF 56-*M/S849
UL, CSA5x22 AWG105°C300 V, 9 A
RSF 58-*M
UL, CSA5x18 AWG105°C300 V, 9 A
See page E59 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RSF .."; "RSFV .." indicates 316 stainless steel housing (leads only)and "RSFK .." indicates nylon housing.For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
5-Wire minifast ® Receptacles, Front Mount, 1/2-14 NPSM Threads
1
RSF ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E66
IndustrialAutomation
Rece
ptac
les
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
6-Wire minifast ® Receptacles, Front Mount, 1/2-14 NPSM Threads
1
RSF ..
Drawing Number Part Number Lead Specs. Features Pinout
RSF 61-*M
UL, CSA6x18 AWG105°C600 V, 9 A 1/2-14NPSM
Threads,Standard Threads
1. GN2. WH3. BU4. Gy5. YE6. BNRSF 61-*M/S849
UL, CSA6x22 AWG105°C300 V, 9 A
RSF 66-*M
UL, CSA6x16 AWG105°C600 V, 9 A 1/2-14NPSM
Threads,Heavy Duty
1. WH2. RD3. GN4. OG5. BK6. BURSF 68-*M
UL, CSA6x18 AWG105°C600 V, 9 A
See page E59 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RSF .."; "RSFV .." indicates 316 stainless steel housing (leads only)and "RSFK .." indicates nylon housing.For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E67 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 V, 9 A
2 and 3-Wire minifast ® Receptacles, Front Mount, 1/2-14 NPSM Threads
Drawing Number Part Number Lead Specs. Features Pinout
RKF 20-*MUL, CSA2x18 AWG105°C
1/2-14NPSMThreads,Standard Duty
1. BN2. BU
RKF 26-*MUL, CSA2x16 AWG Leads105°C
1/2-14NPSMThreads,Heavy Duty
1. WH2. BK
RKF 28-*M
UL, CSA2x18 AWG105°C600 V, 9 A
1/2-14NPSMThreads,Heavy Duty
1. WH2. BK
RKF 30-*MUL, CSA3x18 AWG105°C
1/2-14NPSMThreads,Standard Duty
1. GY/YE2. BN3. BU
RKF 31-*MUL, CSA3x18 AWG105°C
1/2-14NPSMThreads,Standard Duty
1. BK2. BN3. BU
RKF 311-*MUL, CSA3x18 AWG105°C
Automotive ColorCode1/2-14NPSMThreads 1. GN
2. RD/BK3. RD/WH
RKF 35-*MUL, CSA3x16 AWG105°C
Automotive ColorCode1/2-14NPSMThreads
RKF 36-*MUL, CSA3x16 AWG105°C
1/2-14NPSMThreads,Heavy Duty
1. GN2. BK3. WH
RKF 38-*M
UL, CSA3x18 AWG105°C600 V, 9 A
1/2-14NPSMThreads,Heavy Duty
1. GN2. BK3. WH
See page E60 for dimensional drawings.Standard lead length is 0.5 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RKF .."; "RKFV .." indicates 316 stainless steel housing (leads only) and"RKFK .." indicates nylon housing.For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.
7
RKF ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E68
IndustrialAutomation
Rece
ptac
les
Drawing Number Part Number Lead Specs. Features Pinout
RKF 40-*M
UL, CSA4x18 AWG105°C600 V, 9 A
1/2-14NPSMThreads,Standard Duty 1. BN
2. WH3. BU4. BK
RKF 40-*M/S849
UL, CSA4x22 AWG105°C300 V, 9 A
1/2-14NPSMThreads,Standard Duty
RKF 46-*M
UL, CSA4x16 AWG105°C600 V, 9 A
1/2-14NPSMThreads,Heavy Duty
1. BK2. WH3. RD4. GN
RKF 46-*M/S849
UL, CSA4x22 AWG105°C300 V, 9 A
RKF 48-*M
UL, CSA4x18 AWG105°C600 V, 9 A
See page E60 for dimensional drawings.Standard lead length is 0.5 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RKF .."; "RKFV .." indicates 316 stainless steel housing (leads only) and"RKFK .." indicates nylon housing.For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
4-Wire minifast ® Receptacles, Front Mount, 1/2-14 NPSM Threads
7
RKF ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E69 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Drawing Number Part Number Lead Specs. Features Pinout
RKF 50-*MUL, CSA5x18 AWG105°C 1/2-14NPSM
Threads,Standard Duty
1. BK2. BU3. GN/YE4. BN5. WHRKF 50-*M/S849
UL, CSA5x22 AWG105°C300 V
RKF 511-*MUL, CSA5x18 AWG105°C Automotive Color
Code1/2-14NPSMThreads
1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BKRKF 511-*M/S849
UL, CSA5x22 AWG105°C300 V
RKF 55-*MUL, CSA5x16 AWG105°C
Automotive ColorCode1/2-14NPSMThreads
1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BK
RKF 56-*MUL, CSA5x16 AWG105°C 1/2-14NPSM
Threads,Heavy Duty
1. WH2. RD3. GN4. OG5. BKRKF 58-*M
UL, CSA5x18 AWG105°C300 V, 9 A
See page E60 for dimensional drawings.Standard lead length is 0.5 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RKF .."; "RKFV .." indicates 316 stainless steel housing (leads only) and"RKFK .." indicates nylon housing.For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 V, 9 A
5-Wire minifast ® Receptacles, Front Mount, 1/2-14 NPSM Threads
7
RKF ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E70
IndustrialAutomation
Rece
ptac
les
Drawing Number Part Number Lead Specs. Features Pinout
RKF 61-*MUL, CSA6x18 AWG105°C 1/2-14NPSM
Threads,Standard Threads
1. GN2. WH3. BU4. GY5. YE6. BNRKF 61-*M/S849
UL, CSA6x2 AWG105°C300 V
RKF 66-*MUL, CSA6x16 AWG105°C
1/2-14NPSMThreads,Heavy Duty
1. WH2. RD3. GN4. OG5. BK6. BU
RKF 66-*M/S849
UL, CSA6x22 AWG105°C300 V
RKF 68-*M
UL, CSA6x18 AWG105°C600 V, 9 A
See page E60 for dimensional drawings.Standard lead length is 0.5 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RKF .."; "RKFV .." indicates 316 stainless steel housing (leads only) and"RKFK .." indicates nylon housing.For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 V, 9 A
6-Wire minifast ® Receptacles, Front Mount, 1/2-14 NPSM Threads
7
RKF ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E71 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Drawing Number Part Number Lead Specs. Features Pinout
RSF 20-*M/NPTUL, CSA2x18 AWG105°C
1/2-14NPTThreads,Standard Duty
1. BN2. BU
RSF 26-*M/NPTUL, CSA2x16 AWG Leads105°C
1/2-14NPTThreads,Heavy Duty
1. WH2. BK
RSF 28-*M/NPT
UL, CSA2x18 AWG105°C600 V, 9 A
1/2-14NPTThreads,Heavy Duty
1. WH2. BK
RSF 30-*M/NPTUL, CSA3x18 AWG105°C
1/2-14NPTThreads,Standard Duty
1. GY/YE2. BN3. BU
RSF 31-*M/NPTUL, CSA3x18 AWG105°C
1/2-14NPTThreads,Standard Duty
1. BK2. BN3. BU
RSF 311-*M/NPTUL, CSA3x18 AWG105°C
Automotive ColorCode1/2-14NPT Threads 1. GN
2. RD/BK3. RD/WH
RSF 35-*M/NPTUL, CSA3x16 AWG105°C
Automotive ColorCode1/2-14NPT Threads
RSF 36-*M/NPTUL, CSA3x16 AWG105°C
1/2-14NPTThreads,Heavy Duty
1. GN2. BK3. WH
RSF 38-*M/NPT
UL, CSA3x18 AWG105°C600 V, 9 A
1/2-14NPTThreads,Heavy Duty
1. GN2. BK3. WH
See page E59 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RSF .."; "RSFV .." indicates 316 stainless steel housing (leads only).For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 V, 9 A
2 and 3-Wire minifast ® Receptacles, Front Mount, 1/2-14 NPT Threads
2
RSF ../NPT
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E72
IndustrialAutomation
Rece
ptac
les
Drawing Number Part Number Lead Specs. Features Pinout
RSF 40-*M/NPTUL, CSA4x18 AWG105°C
1/2-14NPTThreads,Standard Duty
1. BN2. WH3. BU4. BK
RSF 46-*M/NPTUL, CSA4x16 AWG105°C
1/2-14NPTThreads,Heavy Duty
1. BK2. WH3. RD4. GN
RSF 48-*M/NPT
UL, CSA4x18 AWG105°C600 V, 9 A
See page E59 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RSF .."; "RSFV .." indicates 316 stainless steel housing (leads only).For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 V, 9 A
4-Wire minifast ® Receptacles, Front Mount, 1/2-14 NPT Threads
2
RSF ../NPT
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E73 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Drawing Number Part Number Lead Specs. Features Pinout
RSF 50-*M/NPTUL, CSA5x18 AWG105°C
1/2-14NPTThreads,Standard Duty
1. BK2. BU3. GN/YE4. BN5. WH
RSF 511-*M/NPTUL, CSA5x18 AWG105°C
Automotive ColorCode1/2-14NPT Threads
1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BKRSF 55-*M/NPT
UL, CSA5x16 AWG105°C
Automotive ColorCode1/2-14NPT Threads
RSF 56-*M/NPTUL, CSA5x16 AWG105°C 1/2-14NPT
Threads,Heavy Duty
1. WH2. RD3. GN4. OG5. BKRSF 58-*M/NPT
UL, CSA5x18 AWG105°C300 V, 9 A
RSF 61-*M/NPTUL, CSA6x18 AWG105°C
1/2-14NPTThreads,Standard Duty
1. GN2. WH3. BU4. GY5. YE6. BN
RSF 66-*M/NPTUL, CSA6x16 AWG105°C 1/2-14NPT
Threads,Heavy Duty
1. WH2. RD3. GN4. OG5. BK6. BURSF 68-*M/NPT
UL, CSA6x18 AWG105°C600 V, 9 A
See page E59 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RSF .."; "RSFV .." indicates 316 stainless steel housing (leads only).For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 V, 9 A
5 and 6-Wire minifast ® Receptacles, Front Mount, 1/2-14 NPT Threads
2
RSF ../NPT
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E74
IndustrialAutomation
Rece
ptac
les
Drawing Number Part Number Lead Specs. Features Pinout
RSF 20-*M/M20UL, CSA2x18 AWG105°C
1/2-14NPTThreads,Standard Duty
1. BN2. BU
RSF 26-*M/M20UL, CSA2x16 AWG Leads105°C
1/2-14NPTThreads,Heavy Duty
1. WH2. BK
RSF 30-*M/M20UL, CSA3x18 AWG105°C
1/2-14NPTThreads,Standard Duty
1. GY/YE2. BN3. BU
RSF 31-*M/M20UL, CSA3x18 AWG105°C
1/2-14NPTThreads,Standard Duty
1. BK2. BN3. BU
RSF 311-*M/M20UL, CSA3x18 AWG105°C
Automotive ColorCode1/2-14NPT Threads 1. GN
2. RD/BK3. RD/WH
RSF 35-*M/M20UL, CSA3x16 AWG105°C
Automotive ColorCode1/2-14NPT Threads
RSF 36-*M/M20UL, CSA3x16 AWG105°C
1/2-14NPTThreads,Heavy Duty
1. GN2. BK3. WH
RSF 40-*M/M20UL, CSA4x18 AWG105°C
1/2-14NPTThreads,Standard Duty
1. BN2. WH3. BU4. BK
RSF 46-*M/M20UL, CSA4x16 AWG105°C
1/2-14NPTThreads,Heavy Duty
1. BK2. WH3. RD4. GN
See page E60 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RSF .."; "RSFV .." indicates 316 stainless steel housing (leads only).For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 V, 9 A
2, 3 and 4-Wire minifast ® Receptacles, Front Mount, M20 Threads
9
RSF ../M20
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E75 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Drawing Number Part Number Lead Specs. Features Pinout
RSF 50-*M/M20UL, CSA5x18 AWG105°C
1/2-14NPTThreads,Standard Duty
1. BK2. BU3. GN/YE4. BN5. WH
RSF 511-*M/M20UL, CSA5x18 AWG105°C
Automotive ColorCode1/2-14NPT Threads
1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BKRSF 55-*M/M20
UL, CSA5x16 AWG105°C
Automotive ColorCode1/2-14NPT Threads
RSF 56-*M/M20UL, CSA5x16 AWG105°C
1/2-14NPTThreads,Heavy Duty
1. WH2. RD3. GN4. OG5. BK
RSF 61-*M/M20UL, CSA6x18 AWG105°C
1/2-14NPTThreads,Standard Duty
1. GN2. WH3. BU4. GY5. YE6. BN
RSF 66-*M/M20UL, CSA6x16 AWG105°C
1/2-14NPTThreads,Heavy Duty
1. WH2. RD3. GN4. OG5. BK6. BU
See page E60 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RSF .."; "RSFV .." indicates 316 stainless steel housing (leads only).For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 V, 9 A
5 and 6-Wire minifast ® Receptacles, Front Mount, M20 Threads
9
RSF ../M20
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E76
IndustrialAutomation
Rece
ptac
les
Drawing Number Part Number Lead Specs. Features Pinout
RSF 6B6-*M/14.5/NPT6x16 AWG105°C
1/2-14NPT Threads
1. OG2. BU3. BK4. WH5. RD6. GN
RSF 76-*M/14.5/NPT7x16 AWG105°C
1/2-14NPT Threads
1. WH/BK2. BK3. WH4. RD5. OG6. BU7. GN
RSF 86-*M/14.5/NPT8x16 AWG105°C
1/2-14NPT Threads
1. OG2. BU3. WH/BK4. BK5. WH6. RD7. GN8. RD/BK
RSF 6B6-*M/14.75/NPT6x16 AWG105°C
3/4-14NPT Threads
1. OG2. BU3. BK4. WH5. RD6. GN
RSF 76-*M/14.75/NPT7x16 AWG105°C
3/4-14NPT Threads
1. WH/BK2. BK3. WH4. RD5. OG6. BU7. GN
RSF 86-*M/14.75/NPT8x16 AWG105°C
3/4-14NPT Threads
1. OG2. BU3. WH/BK4. BK5. WH6. RD7. GN8. RD/BK
See page E59 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.1/2-14 receptacles recommend 13/16" (21.0 mm) hole for panel mounting. 3/4-14 receptacles recommend 1-1/16" (27.0 mm) hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RSF .."; "RSFV .." indicates 316 stainless steel housing (leads only).For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 68Protection
• 600 V, 8 A
6, 7 and 8-Wire minifast ® "B" Size Receptacles, Front Mount
3
"B" Style RSF ..1/2-14/NPT
4
"B" Style RSF ..3/4-14/NPT
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E77 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Drawing Number Part Number Lead Specs. Features Pinout
RSF 96-*M/14.5/NPT9x16 AWG105°C
1/2-14 NPTThreads
1. OG2. BU3. RD/BK4. GN/BK5. WH
6. RD7. GN8. WH/BK9. BK
RSF 106-*M/14.5/NPT10x16 AWG105°C
1/2-14 NPTThreads
1. OG2. BU3. WH/BK4. RD/BK5. GN/BK
6. OG/BK7. RD8. GN9. BK10. WH
RSF 126-*M/14.5/NPT12x16 AWG105°C
1/2-14 NPTThreads
1. OG2. BU3. WH/BK4. RD/BK5. GN/BK6. OG/BK
7. BU/BK8. BK/WH9. GN10. RD11. WH12. BK
RSF 96-*M/14.75/NPT9x16 AWG105°C
3/4-14 NPTThreads
1. OG2. BU3. RD/BK4. GN/BK5. WH
6. RD7. GN8. WH/BK9. BK
RSF 106-*M/14.75/NPT10x16 AWG105°C
3/4-14 NPTThreads
1. OG2. BU3. WH/BK4. RD/BK5. GN/BK
6. OG/BK7. RD8. GN9. BK10. WH
RSF 126-*M/14.75/NPT12x16 AWG105°C
3/4-14 NPTThreads
1. OG2. BU3. WH/BK4. RD/BK5. GN/BK6. OG/BK
7. BU/BK8. BK/WH9. GN10. RD11. WH12. BK
See page E59 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.
Standard housing material is nickel plated cast zinc.. "RSF .."; "RSFV .." indicates 316 stainless steel housing (leads only).For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 68Protection
• 600 V, 8 A
9, 10 and 12-Wire minifast ® "C" Size Receptacles, Front Mount
5
"C" Style RSF .. 1/2-14 NPT
6
"C" Style RSF ..3/4-14 NPT
1/2-14 receptacles recommend 7/8" (22.0 mm) hole for panel mounting. 3/4-14 receptacles recommend 1-1/16" (27.0 mm) hole for panel mounting.
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E78
IndustrialAutomation
Rece
ptac
les
Drawing Number Part Number Lead Specs. Features Pinout
RKF 20-*M/NPTUL, CSA2x18 AWG105°C
1/2-14NPTThreads,Standard Duty
1. BN2. BU
RKF 26-*M/NPTUL, CSA2x16 AWG Leads105°C
1/2-14NPTThreads,Heavy Duty
1. WH2. BK
RKF 30-*M/NPTUL, CSA3x18 AWG105°C
1/2-14NPTThreads,Standard Duty
1. GN/YE2. BN3. BU
RKF 31-*M/NPTUL, CSA3x18 AWG105°C
1/2-14NPTThreads,Standard Duty
1. BK2. BN3. BU
RKF 311-*M/NPTUL, CSA3x18 AWG105°C
Automotive ColorCode1/2-14NPT Threads 1. GN
2. RD/BK3. RD/WH
RKF 35-*M/NPTUL, CSA3x16 AWG105°C
Automotive ColorCode1/2-14NPT Threads
RKF 36-*M/NPTUL, CSA3x16 AWG105°C
1/2-14NPTThreads,Heavy Duty
1. GN2. BK3. WH
See page E60 for dimensional drawings.Standard lead length is 0.5 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RKF .."; "RKFV .." indicates 316 stainless steel housing (leads only).For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 V, 9 A
2 and 3-Wire minifast ® Receptacles, Front Mount, 1/2-14 NPT Threads
8
RKF ../NPT
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E79 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Drawing Number Part Number Lead Specs. Features Pinout
RKF 40-*M/NPTUL, CSA4x18 AWG105°C
1/2-14NPTThreads,Standard Duty
1. BN2. WH3. BU4. BK
RKF 46-*M/NPTUL, CSA4x16 AWG105°C
1/2-14NPTThreads,Heavy Duty
1. BK2. WH3. RD4. GN
RKF 48-*M/NPT
UL, CSA4x18 AWG105°C600 V, 9 A
See page E60 for dimensional drawings.Standard lead length is 0.5 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RKF .."; "RKFV .." indicates 316 stainless steel housing (leads only).For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 V, 9 A
4-Wire minifast ® Receptacles, Front Mount, 1/2-14 NPT Threads
8
RKF ../NPT
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E80
IndustrialAutomation
Rece
ptac
les
Drawing Number Part Number Lead Specs. Features Pinout
RKF 50-*M/NPTUL, CSA5x18 AWG105°C
1/2-14NPTThreads,Standard Duty
1. BK2. BU3. GN/YE4. BN5. WH
RKF 511-*M/NPTUL, CSA5x18 AWG105°C
Automotive ColorCode1/2-14NPT Threads
1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BKRKF 55-*M/NPT
UL, CSA5x16 AWG105°C
Automotive ColorCode1/2-14NPT Threads
RKF 56-*M/NPTUL, CSA5x16 AWG105°C 1/2-14NPT
Threads,Heavy Duty
1. WH2. RD3. GN4. OG5. BKRKF 58-*M/NPT
UL, CSA5x18 AWG105°C300 V, 9 A
RKF 61-*M/NPTUL, CSA6x18 AWG105°C
1/2-14NPTThreads,Standard Duty
1. GN2. WH3. BU4. GY5. YE6. BN
RKF 66-*M/NPTUL, CSA6x16 AWG105°C 1/2-14NPT
Threads,Heavy Duty
1. WH2. RD3. GN4. OG5. BK6. BURKF 68-*M/NPT
UL, CSA6x18 AWG105°C600 V, 9 A
See page E60 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RKF .."; "RKFV .." indicates 316 stainless steel housing (leads only).For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 V, 9 A
5 and 6-Wire minifast ® Receptacles, Front Mount, 1/2-14 NPT Threads
8
RKF ../NPT
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E81 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Drawing Number Part Number Lead Specs. Features Pinout
RKF 20-*M/M20UL, CSA2x18 AWG105°C
1/2-14NPTThreads,Standard Duty
1. BN2. BU
RKF 30-*M/M20UL, CSA2x16 AWG Leads105°C
1/2-14NPTThreads,Heavy Duty
1. WH2. BK
RKF 31-*M/M20UL, CSA3x18 AWG105°C
1/2-14NPTThreads,Standard Duty
1. GN/YE2. BN3. BU
RKF 311-*M/M20UL, CSA3x18 AWG105°C
1/2-14NPTThreads,Standard Duty
1. BK2. BN3. BU
RKF 35-*M/M20UL, CSA3x18 AWG105°C
Automotive ColorCode1/2-14NPT Threads 1. GN
2. RD/BK3. RD/WH
RKF 36-*M/M20UL, CSA3x16 AWG105°C
Automotive ColorCode1/2-14NPT Threads
RKF 40-*M/M20UL, CSA3x16 AWG105°C
1/2-14NPTThreads,Heavy Duty
1. GN2. BK3. WH
RKF 46-*M/M20UL, CSA4x18 AWG105°C
1/2-14NPTThreads,Standard Duty
1. BN2. WH3. BU4. BK
See page E60 for dimensional drawings.Standard lead length is 0.5 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RKF .."; "RKFV .." indicates 316 stainless steel housing (leads only).For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 V, 9 A
2, 3 and 4-Wire minifast ® Receptacles, Front Mount, M20 Threads
10
RKF ../M20
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E82
IndustrialAutomation
Rece
ptac
les
Drawing Number Part Number Lead Specs. Features Pinout
RKF 50-*M/M20UL, CSA5x18 AWG105°C
1/2-14NPTThreads,Standard Duty
1. BK2. BU3. GN/YE4. BN5. WH
RKF 511-*M/M20UL, CSA5x18 AWG105°C
Automotive ColorCode1/2-14NPT Threads
1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BKRKF 55-*M/M20
UL, CSA5x16 AWG105°C
Automotive ColorCode1/2-14NPT Threads
RKF 56-*M/M20UL, CSA5x16 AWG105°C
1/2-14NPTThreads,Heavy Duty
1. WH2. RD3. GN4. OG5. BK
RKF 61-*M/M20UL, CSA6x18 AWG105°C
1/2-14NPTThreads,Standard Duty
1. GN2. WH3. BU4. GY5. YE6. BN
RKF 66-*M/M20UL, CSA6x16 AWG105°C
1/2-14NPTThreads,Heavy Duty
1. WH2. RD3. GN4. OG5. BK6. BU
See page E60 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RKF .."; "RKFV .." indicates 316 stainless steel housing (leads only).For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 V, 9 A
5 and 6-Wire minifast ® Receptacles, Front Mount, M20 Threads
10
RKF ../M20
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E83 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Drawing Number Part Number Lead Specs. Features Pinout
RKF 6B6-*M/14.5/NPT6x16 AWG105°C
1/2-14 NPTThreads
1. OG2. BU3. BK4. WH5. RD6. GN
RKF 76-*M/14.5/NPT7x16 AWG105°C
1/2-14 NPTThreads
1. WH/BK2. BK3. WH4. RD5. OG6. BU7. GN
RKF 86-*M/14.5/NPT8x16 AWG105°C
1/2-14 NPTThreads
1. OG2. BU3. WH/BK4. BK5. WH6. RD7. GN8. RD/BK
RKF 6B6-*M/14.75/NPT6x16 AWG105°C
3/4-14 NPTThreads
1. OG2. BU3. BK4. WH5. RD6. GN
RKF 76-*M/14.75/NPT7x16 AWG105°C
3/4-14 NPTThreads
1. WH/BK2. BK3. WH4. RD5. OG6. BU7. GN
RKF 86-*M/14.75/NPT8x16 AWG105°C
3/4-14 NPTThreads
1. OG2. BU3. WH/BK4. BK5. WH6. RD7. GN8. RD/BK
See page E60 for dimensional drawings.Standard lead length is 0.5 Meters. Consult factory for other lengths.
Standard housing material is nickel plated cast zinc.. "RKF .."; "RKFV .." indicates 316 stainless steel housing (leads only).For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 68Protection
• 600 V, 8 A
6, 7 and 8-Wire minifast ® "B" Size Receptacles, Front Mount
11
RKF ../14.5/NPT
12
RKF ../14.75/NPT
1/2-14 receptacles recommend 7/8" (22.0 mm) hole for panel mounting. 3/4-14 receptacles recommend 1-1/16" (27.0 mm) hole for panel mounting.
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E84
IndustrialAutomation
Rece
ptac
les
Drawing Number Part Number Lead Specs. Features Pinout
RKF 96-*M/14.5/NPT9x16 AWG105°C
1/2-14 NPTThreads
1. OG2. BU3. RD/BK4. GN/BK5. WH
6. RD7. GN8. WH/BK9. BK
RKF 106-*M/14.5/NPT10x16 AWG105°C
1/2-14 NPTThreads
1. OG2. BU3. WH/BK4. RD/BK5. GN/BK
6. OG/BK7. RD8. GN9. BK10. WH
RKF 126-*M/14.5/NPT12x16 AWG105°C
1/2-14 NPTThreads
1. OG2. BU3. WH/BK4. RD/BK5. GN/BK6. OG/BK
7. BU/BK8. BK/WH9. GN10. RD11. WH12. BK
RKF 96-*M/14.75/NPT9x16 AWG105°C
3/4-14 NPTThreads
1. OG2. BU3. RD/BK4. GN/BK5. WH
6. RD7. GN8. WH/BK9. BK
RKF 106-*M/14.75/NPT10x16 AWG105°C
3/4-14 NPTThreads
1. OG2. BU3. WH/BK4. RD/BK5. GN/BK
6. OG/BK7. RD8. GN9. BK10. WH
RKF 126-*M/14.75/NPT12x16 AWG105°C
3/4-14 NPTThreads
1. OG2. BU3. WH/BK4. RD/BK5. GN/BK6. OG/BK
7. BU/BK8. BK/WH9. GN10. RD11. WH12. BK
See page E61 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.1/2-14 receptacles recommend 13/16" (21.0 mm) hole for panel mounting. 3/4-14 receptacles recommend 1-1/16" (27.0 mm) hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RKF .."; "RKFV .." indicates 316 stainless steel housing (leads only).For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 68Protection
• 600 V, 8 A
9, 10 and 12-Wire minifast ® "C" Size Receptacles, Front Mount
13
RKF ../14.5/NPT
14
RKF ../14.75/NPT
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E85 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Drawing Number Part Number Lead Specs. Features Pinout
RSFP 20-*MUL, CSA2x18 AWG105°C
M30x1.5 Threads,Standard Duty
1. BN2. BU
RSFP 26-*MUL, CSA2x16 AWG105°C
M30x1.5 Threads,Heavy Duty
1. WH2. BK
RSFP 28-*M
UL, CSA2x18 AWG105°C600 V, 9 A
RSFP 30-*MUL, CSA3x18 AWG105°C
M30x1.5 Threads,Standard Duty
1. GN/YE2. BN3. BU
RSFP 31-*MUL, CSA3x18 AWG105°C
M30x1.5 Threads,Standard Duty
1. BK2. BN3. BU
RSFP 311-*MUL, CSA3x18 AWG105°C
M30x1.5 Threads,Automotive ColorCode 1. GN
2. RD/BK3. RD/WH
RSFP 35-*MUL, CSA3x16 AWG105°C
Automotive ColorCode,M30x1.5 Threads
RSFP 36-*MUL, CSA3x16 AWG105°C
M30x1.5 Threads,Heavy Duty
1. GN2. BK3. WH
RSFP 38-*M
UL, CSA3x18 AWG105°C600 V, 9 A
See page E61 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Standard housing material is nickel plated cast zinc.. "RSFP .."; "RSFPV .." indicates 316 stainless steel housing (leads only).To specify PVC jacketed cable, add "/S717" to the end of the part number.
15
RSFP ..
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 68Protection
• 600 V, 8 A
2 and 3-Wire minifast ® Receptacles, Back Panel Mount
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E86
IndustrialAutomation
Rece
ptac
les
Drawing Number Part Number Lead Specs. Features Pinout
RSFP 40-*MUL, CSA4x18 AWG105°C
M30x1.5 Threads,Standard Duty
1. BN2. WH3. BU4. BK
RSFP 46-*MUL, CSA4x16 AWG105°C
M30x1.5 Threads,Heavy Duty
1. BK2. WH3. RD4. GN
RSFP 48-*M
UL, CSA4x18 AWG105°C600 V, 9 A
See page E61 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Standard housing material is nickel plated cast zinc.. "RSFP .."; "RSFPV .." indicates 316 stainless steel housing (leads only).To specify PVC jacketed cable, add "/S717" to the end of the part number.
15
RSFP ..
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 68Protection
• 600 V, 8 A
4-Wire minifast ® Receptacles, Back Panel Mount
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E87 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Drawing Number Part Number Lead Specs. Features Pinout
RSFP 50-*MUL, CSA5x18 AWG105°C
M30x1.5 Threads,Standard Duty
1. BK2. BU3. GN/YE4. BN5. WH
RSFP 511-*MUL, CSA5x18 AWG105°C
Automotive ColorCode,M30x1.5 Threads
1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BKRSFP 55-*M
UL, CSA5x16 AWG105°C
Automotive ColorCode,M30x1.5 Threads
RSFP 56-*MUL, CSA5x16 AWG105°C
M30x1.5 Threads,Heavy Duty
1. WH2. RD3. GN4. OG5. BKRSFP 58-*M
UL, CSA5x18 AWG105°C300 V, 9 A
RSFP 61-*MUL, CSA6x18 AWG105°C
M30x1.5 Threads,Standard Duty
1. GN2. WH3. BU4. GY5. YE6. BN
RSFP 66-*MUL, CSA6x16 AWG105°C
M30x1.5 Threads,Heavy Duty
1. WH2. RD3. GN4. OG5. BK6. BURSFP 68-*M
UL, CSA6x18 AWG105°C600 V, 9 A
See page E61 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Standard housing material is nickel plated cast zinc.. "RSFP .."; "RSFPV .." indicates 316 stainless steel housing (leads only).To specify PVC jacketed cable, add "/S717" to the end of the part number.
15
RSFP ..
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 68Protection
• 600 V, 8 A
5 and 6-Wire minifast ® Receptacles, Back Panel Mount
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E88
IndustrialAutomation
Rece
ptac
les
2, 3 and 4-Wire minifast ® Receptacles, Back Panel Mount
Drawing Number Part Number Lead Specs. Features Pinout
RKFP 20-*MUL, CSA2x18 AWG105°C
M30x1.5 Threads,Standard Duty
1. BN2. BU
RKFP 26-*MUL, CSA2x16 AWG105°C
M30x1.5 Threads,Heavy Duty
1. Wh2. BK
RKFP 28-*M
UL, CSA2x18 AWG105°C600 V, 9 A
RKFP 30-*MUL, CSA3x18 AWG105°C
M30x1.5 Threads,Standard Duty
1. GN/YE2. BN3. BU
RKFP 31-*MUL, CSA3x18 AWG105°C
M30x1.5 Threads,Standard Duty
1. BK2. BN3. BU
RKFP 311-*MUL, CSA3x18 AWG105°C
M30x1.5 Threads,Automotive ColorCode
1. GN2. RD/BK3. RD/Wh
RKFP 35-*MUL, CSA3x16 AWG105°C
Automotive ColorCode,M30x1.5 Threads
1. GN2. RD/BK3. RD/Wh
RKFP 36-*MUL, CSA3x16 AWG105°C
M30x1.5 Threads,Heavy Duty
1. GN2. BK3. Wh
RKFP 38-*M
UL, CSA3x18 AWG105°C600 V, 9 A
See page E61 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Standard housing material is nickel plated cast zinc.. "RKFP .."; "RKFPV .." indicates 316 stainless steel housing (leads only).To specify PVC jacketed cable, add "/S717" to the end of the part number.
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 68Protection
• 600 V, 8 A
16
RKFP ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E89 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
2, 3 and 4-Wire minifast ® Receptacles, Back Panel Mount
Drawing Number Part Number Lead Specs. Features Pinout
RKFP 40-*MUL, CSA4x18 AWG105°C
M30x1.5 Threads,Standard Duty
1. BN2. Wh3. BU4. BK
RKFP 46-*M
UL, CSA4x16 AWG105°C
M30x1.5 Threads,Heavy Duty
1. BK2. Wh3. RD4. GN
RKFP 48-*M
UL, CSA4x18 AWG105°C600 V, 9 A
See page E61 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Standard housing material is nickel plated cast zinc.. "RKFP .."; "RKFPV .." indicates 316 stainless steel housing (leads only).To specify PVC jacketed cable, add "/S717" to the end of the part number.
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 68Protection
• 600 V, 8 A
16
RKFP ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E90
IndustrialAutomation
Rece
ptac
les
Drawing Number Part Number Lead Specs. Features Pinout
RKFP 50-*MUL, CSA5x18 AWG105°C
M30x1.5 Threads,Standard Duty
1. BK2. BU3. GN/YE4. BN5. WH
RKFP 511-*MUL, CSA5x18 AWG105°C
Automotive ColorCode,M30x1.5 Threads
1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BKRKFP 55-*M
UL, CSA5x16 AWG105°C
Automotive ColorCode,M30x1.5 Threads
RKFP 56-*MUL, CSA5x16 AWG105°C
M30x1.5 Threads,Heavy Duty
1. WH2. RD3. GN4. OG5. BKRKFP 58-*M
UL, CSA5x18 AWG105°C300 V, 9 A
RKFP 61-*MUL, CSA6x18 AWG105°C
M30x1.5 Threads,Standard Duty
1. GN2. WH3. BU4. GY5. YE6. BN
RKFP 66-*MUL, CSA6x16 AWG105°C
M30x1.5 Threads,Heavy Duty
1. WH2. RD3. GN4. OG5. BK6. BURKFP 68-*M
UL, CSA6x18 AWG105°C600 V, 9 A
See page E61 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Standard housing material is nickel plated cast zinc.. "RKFP .."; "RKFPV .." indicates 316 stainless steel housing (leads only).To specify PVC jacketed cable, add "/S717" to the end of the part number.
16
RKFP ..
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 68Protection
• 600 V, 8 A
5 and 6-Wire minifast ® Receptacles, Back Panel Mount
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E91 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Drawing Number Part Number Lead Specs. Features Pinout
RSF 40-PCB4-pin PCB Pins105°C
PG 11 Threads
RSF 50-PCB5-pin PCB Pins105°C
RSFL 262-pin Solder Cups105°C
1/2 - 14NPSM Threads
RSFL 363-pin Solder Cups105°C
RSFL 464-pin Solder Cups105°C
RSFL 565-pin Solder Cups105°C
RSFL 666-pin Solder Cups105°C
See page E62 for dimensional drawings.Standard housing material is nickel plated cast zinc.. "RSFL .."; "RSFVL .." indicates 316 stainless steel housing (leads only). No stainless option for "PCB".For locknuts to be included, add "W/LN" to the end of the part number.
18
RSFL ..
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 V, 9 A
minifast ® PCB Pins and Solder Cup Receptacles
5-pin PCB Board Layout4-pin PCB Board Layout
17
RSF ..-PCB
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E92
IndustrialAutomation
Rece
ptac
les
Drawing Number Part Number Lead Specs. Features Pinout
RKF 40-PCBNickel Plated Brass4-pin PCB Pins80°C
PG 11 Threads
RKF 50-PCBNickel Plated Brass5-pin PCB Pins80°C
RKFL 26
Nickel Plated CastZinc2-pin Solder Cups80°C
1/2 - 14NPSM Threads
RKFL 36
Nickel Plated CastZinc3-pin Solder Cups80°C
RKFL 46
Nickel Plated CastZinc4-pin Solder Cups80°C
RKFL 56
Nickel Plated CastZinc5-pin Solder Cups80°C
RKFL 66
Nickel Plated CastZinc6-pin Solder Cups80°C
See page E62 for dimensional drawings.Standard housing material is nickel plated cast zinc.. "RKFL .."; "RKFVL .." indicates 316 stainless steel housing (leads only). No stainless option for "PCB".
19
RKF ..-PCB
20
RKFL ..
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 V, 9 A
minifast ® PCB Pins and Solder Cup Receptacles
5-pin PCB Board Layout4-pin PCB Board Layout
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E93 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Drawing Number Part Number Specs. Features Male Pinout Female Pinout
RSF RKF 20/22Nickel Plated Brass2-pin105°C
Thrust Washer andPanel KeywayPrevent Rotation -7/8-16UN Threads
RSF RKF 30/22Nickel Plated Brass3-pin105°C
RSF RKF 40/22Nickel Plated Brass4-pin105°C
RSF RKF 50/22Nickel Plated Brass5-pin105°C
RSF RKF 60/22Nickel Plated Brass6-pin105°C
See page E62 for dimensional drawings.Standard housing material is nickel plated brass .. "RSF RKF.."; "RSFV RKFV.." indicates stainless steel housing.
21
RSF RKF ..
• Male to Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
• 600 V, 9 A
minifast ® Bulkhead Feed-Thru Receptacles
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E94
IndustrialAutomation
Rece
ptac
les
Notes:
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E95 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Drawing Number Part Number Cable Application Pinout
B 4131-0/9
Glass filled nylonPG 9 cable gland,accepts 6-8 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 12 A
Mates with all 3-pincordsets andreceptacles
B 4131-0/13.5
Glass filled nylonPG 13.5 cable gland,accepts 10-12 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 12 A
Mates with all 3-pincordsets andreceptacles
B 4141-0/9
Glass filled nylonPG 9 cable gland,accepts 6-8 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 9 A
Mates with all 4-pincordsets andreceptacles
B 4141-0/13.5
Glass filled nylonPG 13.5 cable gland,accepts 10-12 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 9 A
Mates with all 4-pincordsets andreceptacles
• Straight Female Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
3 and 4-Pin minifast ® Field Wireable Connectors
B 41 ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E96
IndustrialAutomation
Fiel
dW
irea
bles
Drawing Number Part Number Cable Application Pinout
B 4151-0/9
Glass filled nylonPG 9 cable gland,accepts 6-8 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 9 A
Mates with all 5-pincordsets andreceptacles
B 4151-0/13.5
Glass filled nylonPG 13.5 cable gland,accepts 10-12 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 9 A
Mates with all 5-pincordsets andreceptacles
B 4151-0/16
Glass filled nylonPG 16 cable gland,accepts 12-14 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 9 A
Mates with all 5-pincordsets andreceptacles
B 71121-0/21
Glass filled nylonaccepts 18 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C600 V, 9 A
Mates with all 12-pincordsets andreceptacles
• Straight Female Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
5 and 12-Pin minifast ® Field Wireable Connectors
B 711 ..
B 41 ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E97 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Drawing Number Part Number Cable Application Pinout
B 4231-0/9
Glass filled nylonPG 9 cable gland,accepts 6-8 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 12 A
Mates with all 3-pincordsets andreceptacles
B 4241-0/9
Glass filled nylonPG 9 cable gland,accepts 6-8 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 9 A
Mates with all 4-pincordsets andreceptacles
B 4251-0/9
Glass filled nylonPG 9 cable gland,accepts 6-8 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 9 A
Mates with all 5-pincordsets andreceptacles
3, 4 and 5-Pin minifast ® Field Wireable Connectors
B 42 ..
• Right Angle Female Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E98
IndustrialAutomation
Fiel
dW
irea
bles
Drawing Number Part Number Cable Application Pinout
BS 4131-0/9
Glass filled nylonPG 9 cable gland,accepts 6-8 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85° C250 V, 12 A
Mates with all 3-pincordsets andreceptacles
BS 4131-0/13.5
Glass filled nylonPG 13.5 cable gland,accepts 10-12 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 12 A
Mates with all 3-pincordsets andreceptacles
BS 4141-0/9
Glass filled nylonPG 9 cable gland,accepts 6-8 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 9 A
Mates with all 4-pincordsets andreceptacles
BS 4141-0/13.5
Glass filled nylonPG 13.5 cable gland,accepts 10-12 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 9 A
Mates with all 4-pincordsets andreceptacles
3 and 4-Pin minifast ® Field Wireable Connectors
BS 41 ..
• Straight Male Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E99 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Drawing Number Part Number Cable Application Pinout
BS 4151-0/9
Glass filled nylonPG 9 cable gland,accepts 6-8 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 9 A
Mates with all 5-pincordsets andreceptacles
BS 4151-0/13.5
Glass filled nylonPG 13.5 cable gland,accepts 10-12 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 9 A
Mates with all 5-pincordsets andreceptacles
BS 4151-0/16
Glass filled nylonPG 16 cable gland,accepts 12-14 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 9 A
Mates with all 5-pincordsets andreceptacles
BS 71121-0/21
Glass filled nylonaccepts 18 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C600 V, 9 A
Mates with all 12-pincordsets andreceptacles
5 and 12-Pin minifast ® Field Wireable Connectors
BS 711 ..
• Straight Male Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
BS 41 ..
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E100
IndustrialAutomation
Fiel
dW
irea
bles
Drawing Number Part Number Cable Application Pinout
BS 4231-0/9
Glass filled nylonPG 9 cable gland,accepts 6-8 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 12 A
Mates with all 3-pincordsets andreceptacles
BS 4241-0/9
Glass filled nylonPG 9 cable gland,accepts 6-8 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 9 A
Mates with all 4-pincordsets andreceptacles
BS 4251-0/9
Glass filled nylonPG 9 cable gland,accepts 6-8 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 9 A
Mates with all 5-pincordsets andreceptacles
3, 4 and 5-Pin minifast ® Field Wireable Connectors
BS 42 ..
• Right Angle Male Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67Protection
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E101 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Drawing Number Part Number Cable Application Wiring Diagram
CA-1/RKF 30
Nylon Housing80°C250 V, 9A
Attaches to standard conduitbody for transition to 3-wireminifast connector
CA-1/RKF 40Attaches to standard conduitbody for transition to 4-wireminifast connector
CA-1/RKF 50Attaches to standard conduitbody for transition to 5-wireminifast connector
Standard receptacle housing material is nickel plated brass.."RKF"; "RKFV" indicates 316 stainless steel.Example: CA-2/RKFV 50.
minifast ® Conduit Adapters, 1 Port
• Attaches to Standard Conduit Bodies for Transition to 3-5 Wireminifast Connectors
• Gasket and 8-32 x 1/2 Mounting Screws
• IP 67 Protection (only when all receptacles are mated orcovered with plugs)
Female Male
3-Pin 4-Pin 5-Pin 3-Pin 4-Pin 5-Pin
Pinouts
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E102
IndustrialAutomation
Fiel
dW
irea
bles
Drawing Number Part Number Cable Application Wiring Diagram
CA-2/RKF 30
Nylon Housing80°C250 V, 9A
Attaches to standard conduitbody for transition to 3-wireminifast connector
CA-2/RKF 30/S651Attaches to standard conduitbody for transition to 3-wireminifast connector, parallelwired
CA-2/RKF 40Attaches to standard conduitbody for transition to 4-wireminifast connector
CA-2/RKF 40/S651
Attaches to standard conduitbody for transition to 4-wireminifast connector, parallelwired
CA-2/RKF 50Attaches to standard conduitbody for transition to 5-wireminifast connector
CA-2/RKF 50/S651
Attaches to standard conduitbody for transition to 5-wireminifast connector, parallelwired
Standard receptacle housing material is nickel plated brass.."RKF"; "RKFV" indicates 316 stainless steel.Example: CA-2/RKFV 50.For pinouts see bottom of page E87.
minifast ® Conduit Adapters, 2 Port
• Attaches to Standard Conduit Bodies for Transition to 3-5 Wire minifastConnectors
• Gasket and 8-32 x 1/2 Mounting Screws
• IP 67 Protection (only when all receptacles are mated or covered with plugs)
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E103 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
minifast ® Tees
Housing Style Part Number Cable Features Pinout
RSM-2RKM 20
PUR1 Male and 2 femaleconnectors250 V,9.0 A80°C
Parallel wired,2 conductor
RSM-2RKM 30
PUR1 Male and 2 femaleconnectors250 V,9.0 A80°C
Parallel wired,3 conductor
RSM-2RKM 40
PUR1 Male and 2 femaleconnectors250 V,9.0 A80°C
Parallel wired,4 conductor
RSM-2RKM 50
PUR1 Male and 2 femaleconnectors250 V,9.0 A80°C
Parallel wired,5 conductor
RSM 50-2RKM 30
PUR1 Male 5-pinconnector, 2 female3-pin connectors250 V,9.0 A80°C
Combine 2cables into 1
Female Male
2-Pin 3-Pin 4-Pin 5-Pin 2-Pin 3-Pin 4-Pin 5-Pin
Pinouts
• Available with Parallel orJunction-style Wiring
• Simplifies Wiring Installations
• Tough Molded Polyurethane Body
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E104
IndustrialAutomation
Acce
ssor
ies
Housing Style Part Number Cable Features Pinout
RSM-2RKM 30-KM
PUR1 Male and 2 femaleconnectors250 V,9.0 A80°C
Parallelwired, 3conductor,keyway facingmaleconnector
RSM-2RKM 40 KM
PUR1 Male and 2 femaleconnectors250 V,9.0 A80°C
Parallelwired, 4conductor,keyway facingmaleconnector
RSM-2RKM 30-KF
PUR1 Male and 2 femaleconnectors250 V,9.0 A80°C
Parallelwired, 3conductor,keyway facingfemaleconnector
RSM-2RKM 40-KF
PUR1 Male and 2 femaleconnectors250 V,9.0 A80°C
Parallelwired, 4conductor,keyway facingfemaleconnector
minifast ® Tees
Female Male
3-Pin 4-Pin 3-Pin 4-Pin
Pinouts
• Drop Keyway Facing Male orFemale Connector
• Available with Parallel Wiring
• Simplifies Wiring Installations
• Tough Molded Polyurethane Body
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E105 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Housing Style Part Number Cable Features Wiring Diagram
See above
RKM 30-*-RSM 50-RKM 30-*
PUR bodyTwo 3-pin female cordsets,PVC Yellow,3x18 AWG7.3 mm O.D.,one 5-pin male connector250 V,9.0 A80°C
Combine 2 cables into 1
RKM 40-*-RSM 40-RKM 40-*
PUR bodyTwo 4-pin female cordsets,PVC Yellow,4x18 AWG7.3 mm OD,one 4-pin male connector250 V,9.0 A80°C
Parallel Wired
RKM 301-*-RSM 301-RKM 301-*
PUR bodyTwo 3-pin female cordsets,PVC Yellow,3x18 AWG7.3 mm OD,one 3-pin male connector250 V9.0 A80°C
Combine 2 cables into 1,series wired
* Length in meters.Standard coupling nut material is nickel plated brass .. "RSM or RKM"; "RS or RK" indicates nylon and "RSV or RKV" indicates 316 stainless steel.
minifast ® Junction Tees, Cable on Female Branches
Female Male
3-Pin 4-Pin 5-Pin 3-Pin 4-Pin 5-Pin
Pinouts
• Junction-style Wiring
• Simplifies Wiring Installations
• Tough Molded Polyurethane Body
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E106
IndustrialAutomation
Acce
ssor
ies
Housing Style Part Number Specs Features Wiring Diagram
See above
RKM 30-RSM 50-*-RKM 30
PUR body two 3-pin femaleconnectors,one 5-pin male cordset,PVC Yellow,5x18 AWG7.3 mm OD,250 V,9.0 A, 80°C
Combine 2 cables into 1
RKM 50-RSM 50-*-RKM 50
PUR bodyTwo 5-pin female connectors,one 5-pin male cordset,PVC Yellow,5x18 AWG7.3 mm OD,250 V,9.0 A, 80°C
Parallel wired
RKM 301-RSM 301-*-RKM 301
PUR bodyTwo 3-pin female connectors,one 3-pin male cordset,PVC Yellow,3x18 AWG7.3 mm OD,250 V,9.0 A, 80°C
Combine 2 cables into 1,series wired
* Length in meters.Standard coupling nut material is nickel plated brass .. "RSM or RKM"; "RS or RK" indicates nylon and "RSV or RKV" indicates 316 stainless steel.
minifast ® Junction Tees, Cable on Male Trunk
Female Male
3-Pin 5-Pin 3-Pin 5-Pin
Pinouts
• Junction-style Wiring
• Simplifies Wiring Installations
• Tough Molded Polyurethane Body
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E107 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
B2131-*M
Nylon300 V/ 4.0 A3x22 AWG70°C
Mates with 3-pincordsets,1/2 - 14NPSMThreads 1. Gn
2. Bn3. Bu
B1131-*M
Nickel plated brass300 V/ 4.0 A3x22 AWG70°C
Mates with 3-pincordsets,1/2 - 14NPSMThreads
B2131-*M/S523Nylon300 V/ 4.0A3x22 AWG70° C
Mates with 3-pincordsets,1/2 - 14NPSMThreads
1. Bk2. Bn3. Bu
B2141-*M
Nylon300 V/ 4.0 A4x22 AWG70°C
Mates with 4-pincordsets,1/2 - 14NPSMThreads
1. Bn2. Wh3. Bu4. Bk
B1141-*M
Nickel plated brass300 V/ 4.0 A4x22 AWG70°C
Mates with 4-pincordsets,1/2 - 14NPSMThreads
B1131-PG9-*M
Nickel plated brass300 V/ 4.0 A3x22 AWG70°C
Mates with 3-pincordsets,PG 9 Threads
1. Gn2. Bn3. Bu
B1141-PG9-*M
Nickel plated brass300 V/ 4.0 A4x22 AWG70°C
Mates with 4-pincordsets,PG 9 Threads
1. Bn2. Wh3. Bu4. Bk
B1151-PG9-*M
Nickel plated brass300 V/ 4.0 A5x22 AWG70°C
Mates with 5-pincordsets,PG 9 Threads
1. Bn2. Wh3. Bu4. Bk5. Gn
minifast ® Quick Disconnect Adapters
• Adapt to Standard minifastCordsets
• Available w/NPSM or PG 9Threads
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E108
IndustrialAutomation
Acce
ssor
ies
Housing Style Part Number Specs Features Wiring Diagram
RSM 40-FK 4.4
Nickel plated brass250 V,4 A80°C
Female eurofast ®,male minifast ®,4-pin
RSM 50-FK 4.5
Nickel plated brass250 V,4 A80°C
Female eurofast,male minifast,5-pin
RKM 30/SB3
Nickel plated brass250 V,4 A80°C
Female minifast,male microfast ®,3-pin
minifast ® Quick Disconnect Adapters
Female Male
3-Pin minifast 4-Pin eurofast 5-Pin eurofast 3-Pin microfast 4-Pin minifast 5-Pin minifast
Pinouts
• Convert minifast to eurofast ® ormicrofast ®
• Rugged Metal Connector
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
E109 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com
TURCKIndustrial Connectivity Products
Drawing Part Number Specifications Application
RKM-CCNickel plated brass7/8-16UN threads6" stainless steel lanyard
Closure cap, mates to male cordsets,receptacles
RKMV-CCStainless steel7/8-16UN threads6" stainless steel lanyard
Closure cap, mates to male cordsets,receptacles
RSM-CCNickel plated brass7/8-16UN threads6" stainless steel lanyard
Closure cap, mates to femalecordsets, receptacles
RSMV-CCStainless steel7/8-16UN threads6" stainless steel lanyard
Closure cap, mates to femalecordsets, receptacles
RKF-CCNickel plated brass7/8-16UN threads6" stainless steel lanyard
Closure cap, mates to malereceptacles
RKFV-CCStainless steel7/8-16UN threads6" stainless steel lanyard
Closure cap, mates to malereceptacles
RSF-CCNickel plated brass7/8-16UN threads6" stainless steel lanyard
Closure cap, mates to femalereceptacles
RSFV-CCStainless steel7/8-16UN threads6" stainless steel lanyard
Closure cap, mates to femalereceptacles
RKF-MCNickel plated brass7/8-16UN threadsBUNA-N gasket
Closure cap, mates to malereceptacles
RKFV-MCStainless steel7/8-16UN threadsBUNA-N gasket
Closure cap, mates to malereceptacles
RSF-MCNickel plated brass7/8-16UN threadsBUNA-N gasket and O-ring
Closure cap, mates to femalecordsets, receptacles
RSFV-MCStainless steel7/8-16UN threadsBUNA-N gasket and O-ring
Closure cap, mates to femalecordsets, receptacles
minifast ® Accessories
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E110
IndustrialAutomation
Acce
ssor
ies
Drawing Part Number Specifications Application
DUST CAP RKM(50/PACKAGE)
NylonClosure cap, mates to junction boxesand female cordsets
DUST CAP RSM(50/PACKAGE)
NylonClosure cap, mates to junction boxesand male cordsets
FF 78 AL Anodized AluminumFemale adapter to be used with 2female coupling nuts
MB-MINITEE 1 Nylon
Mounting bracket for minifast tees
minifast ® Accessories
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com