IBM InfoSphere Master Data Management
InfoSphere Master Data ManagementVersion 11.0MDM Physical Data Dictionary
GI13-2668-00
���
IBM InfoSphere Master Data Management
InfoSphere Master Data ManagementVersion 11.0MDM Physical Data Dictionary
GI13-2668-00
���
NoteBefore using this information and the product it supports, read the general information under “Notices” on page 193.
Edition Notice
This edition applies to version 11.0 of IBM InfoSphere Master Data Management and to all subsequent releases andmodifications until otherwise indicated in new editions.
© Copyright IBM Corporation 1996, 2013.US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contractwith IBM Corp.
Contents
Chapter 1. Tables. . . . . . . . . . . 1ACCESSDATEVAL . . . . . . . . . . . . 1ADDACTIONTYPE . . . . . . . . . . . . 2ADDRESS . . . . . . . . . . . . . . . 2ADDRESSGROUP . . . . . . . . . . . . 5AGREEMENTSPECVAL . . . . . . . . . . 5BANKACCOUNT . . . . . . . . . . . . 6BILLINGSUMMARY. . . . . . . . . . . . 7CAMPAIGN . . . . . . . . . . . . . . 9CAMPAIGNASSOCIAT . . . . . . . . . . 10CATEGORY . . . . . . . . . . . . . . 11CATEGORYNLS . . . . . . . . . . . . . 12CATEQUIV . . . . . . . . . . . . . . 13CATHIERARCHY . . . . . . . . . . . . 14CATHIERARCHYNLS . . . . . . . . . . . 15CATNODEREL . . . . . . . . . . . . . 15CDACCETOCOMPTP . . . . . . . . . . . 16CDACCOUNTREQUIREDTP . . . . . . . . 17CDACCOUNTTP . . . . . . . . . . . . 17CDACTIONADJREASTP . . . . . . . . . . 18CDADDRUSAGETP . . . . . . . . . . . 19CDADMINFLDNMTP . . . . . . . . . . . 19CDADMINSYSTP . . . . . . . . . . . . 20CDAGEVERDOCTP . . . . . . . . . . . 21CDAGREEMENTSTTP . . . . . . . . . . 21CDAGREEMENTTP . . . . . . . . . . . 22CDARRANGEMENTTP . . . . . . . . . . 23CDAVAILABILITYTP . . . . . . . . . . . 24CDBILLINGSTTP . . . . . . . . . . . . 25CDBILLTP. . . . . . . . . . . . . . . 25CDBUYSELLAGREETP . . . . . . . . . . 26CDCAMPAIGNTP . . . . . . . . . . . . 27CDCDCREJREASONTP . . . . . . . . . . 27CDCDCSTTP . . . . . . . . . . . . . . 28CDCHARGECARDTP . . . . . . . . . . . 29CDCLAIMROLETP . . . . . . . . . . . . 30CDCLAIMSTATUSTP . . . . . . . . . . . 30CDCLAIMTP . . . . . . . . . . . . . . 31CDCLIENTIMPTP . . . . . . . . . . . . 32CDCLIENTPOTENTP . . . . . . . . . . . 32CDCLIENTSTTP. . . . . . . . . . . . . 33CDCONDITIONATTRIBUTETP. . . . . . . . 34CDCONDITIONOWNERTP . . . . . . . . . 35CDCONDITIONUSAGETP . . . . . . . . . 35CDCONTMETHCAT . . . . . . . . . . . 36CDCONTMETHTP . . . . . . . . . . . . 37CDCONTRACTRELSTTP . . . . . . . . . . 38CDCONTRACTRELTP. . . . . . . . . . . 38CDCONTRACTROLETP . . . . . . . . . . 39CDCONTRACTSTTP . . . . . . . . . . . 40CDCONTRCOMPTP . . . . . . . . . . . 41CDCOUNTRYTP . . . . . . . . . . . . 41CDCURRENCYTP . . . . . . . . . . . . 42CDDEMOGRAPHICSTP . . . . . . . . . . 43CDDOMAINTP . . . . . . . . . . . . . 44CDDOMAINVALUETP . . . . . . . . . . 44
CDEMEMATCHFUNCTIONTP . . . . . . . . 45CDEMEMATCHWORDTP . . . . . . . . . 46CDENDREASONTP . . . . . . . . . . . 47CDENTITYLINKSTTP . . . . . . . . . . . 48CDFREQMODETP . . . . . . . . . . . . 49CDGENERATIONTP . . . . . . . . . . . 50CDHIGHESTEDUTP . . . . . . . . . . . 50CDHOLDINGTP . . . . . . . . . . . . 51CDIDSTATUSTP. . . . . . . . . . . . . 52CDIDTP . . . . . . . . . . . . . . . 52CDINACTREASONTP. . . . . . . . . . . 53CDINCOMESRCTP. . . . . . . . . . . . 54CDINDUSTRYTP . . . . . . . . . . . . 55CDLANGTP . . . . . . . . . . . . . . 55CDLINKREASONTP . . . . . . . . . . . 56CDLOBRELTP . . . . . . . . . . . . . 57CDLOBTP . . . . . . . . . . . . . . . 57CDMARITALSTTP . . . . . . . . . . . . 58CDMATCHENGINETP . . . . . . . . . . 59CDMATCHRELEVTP . . . . . . . . . . . 60CDMETADATAINFOTP . . . . . . . . . . 60CDMETADATAPACKAGETP . . . . . . . . 61CDMETHODSTATUSTP . . . . . . . . . . 61CDMISCVALUEATTRTP . . . . . . . . . . 62CDMISCVALUECAT . . . . . . . . . . . 63CDMISCVALUETP . . . . . . . . . . . . 64CDNAMEUSAGETP . . . . . . . . . . . 65CDNODETP . . . . . . . . . . . . . . 66CDORGNAMETP . . . . . . . . . . . . 66CDORGTP. . . . . . . . . . . . . . . 67CDPAYMENTMETHODTP . . . . . . . . . 68CDPPREFACTIONTP . . . . . . . . . . . 69CDPPREFCAT . . . . . . . . . . . . . 69CDPPREFREASONTP . . . . . . . . . . . 70CDPPREFSEGTP . . . . . . . . . . . . 71CDPPREFTP . . . . . . . . . . . . . . 72CDPREFIXNAMETP . . . . . . . . . . . 72CDPRIMARYTARGETMARKETTP . . . . . . 73CDPRIORITYCATTP . . . . . . . . . . . 74CDPRIORITYTP . . . . . . . . . . . . . 75CDPRODCONTRACTRELTP . . . . . . . . 75CDPRODRELATIONTP . . . . . . . . . . 76CDPRODRELTP . . . . . . . . . . . . . 77CDPRODSTRUCTURETP. . . . . . . . . . 78CDPRODTP . . . . . . . . . . . . . . 78CDPRODUCTIDENTIFIERTP . . . . . . . . 79CDPRODUCTPARTYROLETP . . . . . . . . 80CDPRODUCTSTATUSTP . . . . . . . . . . 81CDPROVSTATETP . . . . . . . . . . . . 82CDPURPOSETP . . . . . . . . . . . . . 82CDRELASSIGNTP . . . . . . . . . . . . 83CDRELTP . . . . . . . . . . . . . . . 84CDREPOSITORYTP. . . . . . . . . . . . 85CDRESIDENCETP . . . . . . . . . . . . 85CDRESOLUTIONTP . . . . . . . . . . . 86CDROLECATTP . . . . . . . . . . . . . 87
© Copyright IBM Corp. 1996, 2013 iii
CDROLETP . . . . . . . . . . . . . . 88CDRPTINGFREQTP . . . . . . . . . . . 88CDSERVICELEVELTP . . . . . . . . . . . 89CDSHAREDISTTP . . . . . . . . . . . . 90CDSOURCEIDENTTP . . . . . . . . . . . 91CDSPECCASCADETP . . . . . . . . . . . 91CDSPECUSETP . . . . . . . . . . . . . 92CDSTATUSREASONTP . . . . . . . . . . 93CDSUSPECTREASONTP . . . . . . . . . . 94CDSUSPECTSOURCETP . . . . . . . . . . 94CDSUSPECTSTATUSTP . . . . . . . . . . 95CDSUSPECTTP . . . . . . . . . . . . . 96CDTAXPOSITIONTP . . . . . . . . . . . 97CDTERMINATIONREASONTP. . . . . . . . 98CDUNDELREASONTP . . . . . . . . . . 98CDUSERROLETP . . . . . . . . . . . . 99CHARGECARD . . . . . . . . . . . . 100CLAIM . . . . . . . . . . . . . . . 100CLAIMCONTRACT . . . . . . . . . . . 102CLAIMROLE . . . . . . . . . . . . . 103CONDITIONATTRIBUTE . . . . . . . . . 103CONTACT . . . . . . . . . . . . . . 104CONTACTCDC . . . . . . . . . . . . 107CONTACTDEMOGRAPHICS . . . . . . . . 108CONTACTMETHOD . . . . . . . . . . . 108CONTACTMETHODGROUP . . . . . . . . 109CONTACTREL . . . . . . . . . . . . . 110CONTEQUIV . . . . . . . . . . . . . 111CONTMACROROLE . . . . . . . . . . . 112CONTRACT. . . . . . . . . . . . . . 113CONTRACTCOMPONENT. . . . . . . . . 116CONTRACTCOMPVAL . . . . . . . . . . 118CONTRACTREL . . . . . . . . . . . . 119CONTRACTROLE. . . . . . . . . . . . 120CONTRACTROLEREL . . . . . . . . . . 121CONTSUMMARY . . . . . . . . . . . . 122DEFAULTSOURCEVAL . . . . . . . . . . 124EME_RECBKTD . . . . . . . . . . . . 125EME_RECCHKD . . . . . . . . . . . . 126EME_RECCMPD . . . . . . . . . . . . 126EME_RECHEAD . . . . . . . . . . . . 126ENTITYCONDITIONREL . . . . . . . . . 127ENTITYCONTENTREFERENCE . . . . . . . 128ENTITYROLE . . . . . . . . . . . . . 129ENTITYSPECUSE . . . . . . . . . . . . 130FINANCIALPRODUCT . . . . . . . . . . 131GOODSPRODUCT . . . . . . . . . . . 131HOLDING . . . . . . . . . . . . . . 132IDENTIFIER. . . . . . . . . . . . . . 133INACTIVATEDCONT . . . . . . . . . . 134INACTIVECONTLINK . . . . . . . . . . 135INACTIVEPRODLINK . . . . . . . . . . 136INCOMESOURCE. . . . . . . . . . . . 136INSURANCEPRODUCT. . . . . . . . . . 137LOBREL . . . . . . . . . . . . . . . 138LOCATIONGROUP . . . . . . . . . . . 139MACROROLEASSOC . . . . . . . . . . 141MISCVALUE . . . . . . . . . . . . . 142NATIVEKEY . . . . . . . . . . . . . 144
ORG . . . . . . . . . . . . . . . . 145ORGNAME . . . . . . . . . . . . . . 146PAYMENTSOURCE . . . . . . . . . . . 147PAYROLLDEDUCTION . . . . . . . . . . 148PERSON . . . . . . . . . . . . . . . 149PERSONNAME . . . . . . . . . . . . 150PERSONSEARCH . . . . . . . . . . . . 152PHONENUMBER . . . . . . . . . . . . 153PPREFACTIONOPT . . . . . . . . . . . 154PPREFDEF . . . . . . . . . . . . . . 155PPREFDEFREL . . . . . . . . . . . . . 155PPREFENTITY . . . . . . . . . . . . . 156PPREFINSTANCE . . . . . . . . . . . . 157PRIVPREF . . . . . . . . . . . . . . 158PRODTPREL . . . . . . . . . . . . . 158PRODUCT . . . . . . . . . . . . . . 159PRODUCTCATEGORYASSOC. . . . . . . . 161PRODUCTCONTRACTREL . . . . . . . . 161PRODUCTEQUIV . . . . . . . . . . . . 162PRODUCTIDENTIFIER . . . . . . . . . . 163PRODUCTMATCHRESULT . . . . . . . . 164PRODUCTNLS . . . . . . . . . . . . . 164PRODUCTPARTYROLE . . . . . . . . . . 165PRODUCTREL . . . . . . . . . . . . . 166PRODUCTSUSPECT . . . . . . . . . . . 167PRODUCTTYPE . . . . . . . . . . . . 168PRODUCTTYPENLS . . . . . . . . . . . 169PRODUCTVAL . . . . . . . . . . . . . 170PRODUCTVALINDEX . . . . . . . . . . 170PRODUCTVALNLS . . . . . . . . . . . 172PRODUCTVALNLSINDEX . . . . . . . . . 172PROPERTY . . . . . . . . . . . . . . 173ROLEIDENTIFIER. . . . . . . . . . . . 174ROLELOCATION . . . . . . . . . . . . 175ROLELOCPURPOSE . . . . . . . . . . . 176ROLESITUATION . . . . . . . . . . . . 176SEARCHEXCLRULE . . . . . . . . . . . 177SERVICEPRODUCT . . . . . . . . . . . 178SPEC . . . . . . . . . . . . . . . . 178SPECFMT . . . . . . . . . . . . . . 179SPECFORMATTRANSLATION . . . . . . . 180SPECSRCHATTR . . . . . . . . . . . . 180SUSPECT. . . . . . . . . . . . . . . 181SUSPECTAUGMENT . . . . . . . . . . . 183TERMCONDITION . . . . . . . . . . . 183TERMCONDITIONNLS . . . . . . . . . . 185USERTABLE. . . . . . . . . . . . . . 185VEHICLE . . . . . . . . . . . . . . 186
Chapter 2. Tables by Features . . . . 187Account Domain . . . . . . . . . . . . 187Party Domain . . . . . . . . . . . . . 188Product Domain . . . . . . . . . . . . 191
Notices . . . . . . . . . . . . . . 193
Trademarks . . . . . . . . . . . . 197
iv InfoSphere MDM 11.0: MDM Physical Data Dictionary
Chapter 1. Tables
This section contains details about the InfoSphere® MDM database tables.
ACCESSDATEVALThe ACCESSDATEVAL table captures the last used date and last verified datearound various entities and attributes.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
ACC_DATE_VAL_ID A unique, system-generated key thatidentifies a default object in thesystem.
BIGINT Not Null Yes
INSTANCE_PK The actual primary key of the row inthe logical entity.
BIGINT Not Null No
ENTITY_NAME The name of the business entity. VARCHAR(20) Not Null No
COL_NAME The actual name of the column wherethe default occurred.
VARCHAR(20) Null No
DESCRIPTION A description of the record. VARCHAR(1000) Null No
LAST_USED_DT The date that this data was last used.There is no business logic associatedwith this field.
TIMESTAMP Null No
LAST_VERIFIED_DT The date that this data was lastverified. There is no business logicassociated with this field.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
© Copyright IBM Corp. 1996, 2013 1
ADDACTIONTYPEThe ADDACTIONTYPE table identifies an action taken as a result of suspectduplicate identification.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
ADD_ACTION_ID A unique, system-generated key thatidentifies an add action in the system.
BIGINT Not Null Yes
MATCH_RELEV_TP_CD Identifies the CONTACT matchrelevancies - scores and descriptions.
BIGINT Not Null No
SUSP_REASON_TP_CD Describes the critical data that wasconsidered "matched" between twoparticular CONTACT records duringsuspect processing. Examples includeall elements matched (first name, lastname, and so forth).
BIGINT Not Null No
ORG_TP_CD Identifies the classification of theorganization. For example, trust,company, charity, estate, and so forth.
BIGINT Null No
PERSON_ORG_CODE Indicates the type of CONTACT -person or organization.
CHAR(1) Not Null No
ADD_ACTION_CODE Identifies the action taken as a resultof suspect duplicate identification.
CHAR(2) Not Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
SUSPECT_TP_CD Suspect Type code captures varioussuspect types. One record exists foreach unique add_action_code in theaddactiontype table.
BIGINT Null No
ADDRESSThe ADDRESS table records the location used for mailing and other streetaddresses. Only one address per CDADDRUSAGETP is allowed. For example,there can only be one "Mailing" address for a contact.
This table is used by the following domains.
2 InfoSphere MDM 11.0: MDM Physical Data Dictionary
v Account Domainv Party Domain
Name Comment Datatype Null Option Is PK
ADDRESS_ID A unique, system-generated key thatidentifies an address in the system.
BIGINT Not Null Yes
COUNTRY_TP_CD Identifies a country. BIGINT Null No
RESIDENCE_TP_CD A type of residence for a givenaddress. Some examples includeHome, Apartment and Suite.
BIGINT Null No
PROV_STATE_TP_CD Identifies US States, Possessions,overseas military locations, as well asnon-US country provinces. Foroverseas military locations, APO orFPO designations are used along witha "state" abbreviation, AE, AP, or AA,and the ZIP code.
BIGINT Null No
ADDR_LINE_ONE The first line of an address. VARCHAR(100) Not Null No
P_ADDR_LINE_ONE The phonetic representation of thefirst line of an address. Not currentlyused.
CHAR(8) Null No
ADDR_LINE_TWO The second line of an address. VARCHAR(100) Null No
P_ADDR_LINE_TWO The phonetic representation of thesecond line of an address. Notcurrently used.
CHAR(8) Null No
ADDR_LINE_THREE The third line of an address. VARCHAR(100) Null No
P_ADDR_LINE_THREE The phonetic representation of thethird line of an address. Not currentlyused.
CHAR(8) Null No
CITY_NAME The city of an address. VARCHAR(50) Not Null No
POSTAL_CODE Postal Codes, and ZIP Codes, areused by the postal system to uniquelyidentify an address location.
VARCHAR(20) Null No
ADDR_STANDARD_IND
Indicates whether this address isstandardized.
CHAR(1) Null No
OVERRIDE_IND Indicates whether the addressstandardization process should beoverridden.
CHAR(1) Null No
RESIDENCE_NUM The apartment, suite, or unit numberof the address.
VARCHAR(10) Null No
COUNTY_CODE A three-digit postal code used toidentify the county of the post office.
CHAR(3) Null No
LATITUDE_DEGREES Latitude of Measure in Degreesidentifies an angular distance north orsouth. Latitude Degrees is useful forMapping Software (for example, toidentify the nearest doctors office).
VARCHAR(10) Null No
LONGITUDE_DEGREES Longitude of Measure in Degreesidentifies an angular distance east orwest. Longitude Degrees is useful forMapping Software (for example, toidentify the nearest doctors office).
VARCHAR(10) Null No
Chapter 1. Tables 3
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
POSTAL_BARCODE The structure of the 12 digits postalbar code is as follows: 5 digits for theZIP code; 4 digits for the ZIP+4 code;2 digits representing the last 2 digitsof the street address; 1 digit checksumcalculated as the sum of the otherdigits modulo 10.
VARCHAR(30) Null No
P_CITY The phonetic key for City. VARCHAR(20) Null No
BUILDING_NAME The name of the building. VARCHAR(64) Null No
STREET_NUMBER The street number of the building.For example: "55" in the address "55Main Road East".
VARCHAR(16) Null No
STREET_NAME The name of the street. For example:"Main" in the address "55 Main RoadEast".
VARCHAR(64) Null No
STREET_SUFFIX The type of street. For example:"Road" in the address "55 Main RoadEast".
VARCHAR(16) Null No
PRE_DIRECTIONAL A directional element of the address. VARCHAR(16) Null No
POST_DIRECTIONAL A directional element of the address.For example: "East" in the address "55Main Road East".
VARCHAR(16) Null No
BOX_DESIGNATOR Box designator. VARCHAR(16) Null No
BOX_ID Box identifier. VARCHAR(16) Null No
STN_INFO Station information. VARCHAR(16) Null No
STN_ID Station identifier. VARCHAR(16) Null No
REGION Further qualification of area, inaddition to City.
VARCHAR(32) Null No
DEL_DESIGNATOR Delivery designator. VARCHAR(16) Null No
DEL_ID Delivery identifier. VARCHAR(16) Null No
DEL_INFO Additional delivery information. VARCHAR(50) Null No
P_STREET_NAME The phonetic representation of thename of the street.
VARCHAR(30) Null No
STREET_PREFIX VARCHAR(16) Null No
4 InfoSphere MDM 11.0: MDM Physical Data Dictionary
ADDRESSGROUPThe ADDRESSGROUP table links a contact to an address and contains rulesspecific for using that address.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LOCATION_GROUP_ID A unique, system-generated key thatidentifies a location group in thesystem.
BIGINT Not Null Yes
ADDRESS_ID A unique, system-generated key thatidentifies an address in the system.
BIGINT Not Null No
CARE_OF_DESC In Care of Description is placed abovethe recipient line. It containsinformation such as a specific personor department to provide additionalinformation, facilitating delivery.
VARCHAR(50) Null No
ADDR_USAGE_TP_CD Identifies the usage of an addressprovided by a party. Examplesinclude residence address, businessaddress, and so forth.
BIGINT Not Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
AGREEMENTSPECVALThe AGREEMENTSPECVAL table contains spec values that are related to businessagreements.
This table is used by the following domain.v Account Domain
Name Comment Datatype Null Option Is PK
AGREEMENT_SPEC_VAL_ID
A unique, system-generated key thatidentifies a set of contract related specvalues in the system.
BIGINT Not Null Yes
SPEC_ID The spec that describes the definitionof the spec values.
BIGINT Not Null No
Chapter 1. Tables 5
Name Comment Datatype Null Option Is PK
SPEC_FMT_ID The spec format, or version, used tovalidate these spec values.
BIGINT Not Null No
ENTITY_NAME The type of entity with which thespec values are associated. The typesof entities are expected to becontract-related.
VARCHAR(250) Not Null No
INSTANCE_PK The primary key of the related entity. BIGINT Not Null No
VALUE_XML The spec values as defined by theassociated spec format.
XML Not Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
BANKACCOUNTThe BANKACCOUNT table is a subtype of the PAYMENTSOURCE table,describing the bank account information used to pay one or more contracts oraccounts.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
PAYMENT_SOURCE_ID A unique, system-generated key thatidentifies a payment source in thesystem.
BIGINT Not Null Yes
ACCT_TP_CD The type of bank account provided bythe party. Some examples arechecking, savings, etc.
BIGINT Not Null No
ACCT_NUM The alphanumeric identifier assignedto the bank account that uniquelyidentifies it for that given institution.
VARCHAR(30) Not Null No
RECORDED_OPEN_DT The date on which the bank accountwas actually opened, or recorded asopened.
TIMESTAMP Null No
6 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
RECORDED_CLOSED_DT
The date on which the bank accountwas actually closed, or recorded asclosed.
TIMESTAMP Null No
BRANCH_NUM The local office, or branch, identifierused by the bank to identify thatlocation of the account.
VARCHAR(10) Not Null No
BANK_NUM A unique identifier for the bank,assigned outside of the system.
VARCHAR(10) Not Null No
DEPOSITOR_NAME The Party's name as printed on acheck (the account registration name).
VARCHAR(255) Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
BILLINGSUMMARYThe BILLINGSUMMARY table represents a summary bill for a CONTRACT or aCONTRACTCOMPONENT.
This table is used by the following domains.v Account Domainv Party Domain
Name Comment Datatype Null Option Is PK
BILLING_SUMMARY_ID A unique, system-generated key thatidentifies a billing summary in thesystem.
BIGINT Not Null Yes
BILLING_ST_TP_CD A unique type code which uniquelydefines a billing status value. Forexample, closed, paid, and so forth.
BIGINT Not Null No
PYMT_MTHD_TP_CD A type code which uniquely identifiesa payment method value in thesystem. This represents the nextpayment method type. Someexamples are bank account, chargecard, cash, and so forth.
BIGINT Null No
Chapter 1. Tables 7
Name Comment Datatype Null Option Is PK
LAST_PY_MD_TP_CD A type code which uniquely identifiesa payment method value in thesystem. This represents the lastpayment method type. Someexamples are bank account, chargecard, cash, and so forth.
BIGINT Null No
EFFECTIVE_DATE The date from which this billingsummary is effective.
TIMESTAMP Null No
DUE_DATE The due date for this billingsummary.
TIMESTAMP Null No
ACCOUNT_BALANCE The total outstanding balance. DECIMAL(17,3) Not Null No
MIN_PAYMENT The minimum payment required forthis billing summary.
DECIMAL(17,3) Null No
MAX_PAYMENT The maximum payment allowed forthis billing summary.
DECIMAL(17,3) Null No
PAID_TO_DATE The date up to which the account orcontract has been paid.
TIMESTAMP Null No
INVOICE_ID Links this billing summary to aninvoice; external to the system.
VARCHAR(50) Null No
BILL_FROM_DATE The start date of the billing period ofthis billing summary.
TIMESTAMP Null No
BILL_TO_DATE The end date of the billing period ofthis billing summary.
TIMESTAMP Null No
ACCOUNT_ID An account ID is a free form specificmeans by which the account can bedistinguished from all other accounts.
VARCHAR(50) Null No
PAYMENT_SOURCE_ID A unique, system-generated key thatidentifies a payment source in thesystem.
BIGINT Null No
WITHDRAWAL_DATE The date on which payment will bewithdrawn from a payment source forthis billing summary.
TIMESTAMP Null No
LAST_PAYMENT_AMT The amount paid or withdrawnagainst the last billing summary.
DECIMAL(17,3) Null No
LAST_PAYMENT_DT The date when payment was lastreceived.
TIMESTAMP Null No
PAYMENTS_REMAINING
The number of payments remaining. INTEGER Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
8 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
FREQ_MODE_TP_CD The frequency of the payments madeon the contract. For example, monthlyor annual.
BIGINT Null No
CONTRACT_ID A unique, system-generated key thatidentifies a contract in the system.
BIGINT Null No
CONTR_COMPONENT_ID
A unique, system-generated key thatidentifies a contract component in thesystem.
BIGINT Null No
ACCBALA_CUR_TP The currency type for the accountbalance.
BIGINT Null No
MINPAYM_CUR_TP The currency type for the minimumpayment.
BIGINT Null No
MAXPAYM_CUR_TP The currency type for the maximumpayment.
BIGINT Null No
LASTPAY_CUR_TP The currency type for the lastpayment.
BIGINT Null No
CAMPAIGNThe CAMPAIGN table contains the details of a campaign for customer solicitation,including the priority order for customer presentation.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
CAMPAIGN_ID A unique, system-generated key thatidentifies a campaign in the system.
BIGINT Not Null Yes
PRIORITY_TP_CD The priority of a task, a campaign, avalue, and so on. Examples includehigh, medium, low.
BIGINT Null No
CAMPAIGN_TP_CD A numeric representation of thecampaign for customer.
BIGINT Null No
CAMPAIGN_SOURCE The source of the campaign record. VARCHAR(100) Null No
NAME A short, meaningful label for thecampaign.
VARCHAR(30) Not Null No
DESCRIPTION Provides extra space for informationthat can be used for an additionaldefinition or as free form commentsto provide further meaning.
VARCHAR(255) Null No
CREATED_DT The date when this record wascreated.
TIMESTAMP Not Null No
START_DT The date when this record becomesactive.
TIMESTAMP Null No
Chapter 1. Tables 9
Name Comment Datatype Null Option Is PK
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
CAMPAIGNASSOCIATThe CAMPAIGNASSOCIAT table lists the association between a campaign and anyassociated entities.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
CAMPAIGNASSOC_ID A unique, system-generated key thatidentifies a Campaign Group in thesystem.
BIGINT Not Null Yes
ENTITY_NAME The name of the business entity thatis associated with the Campaign.
VARCHAR(20) Not Null No
INSTANCE_PK The actual primary key of the row inthe logical entity that is associatedwith the Campaign.
BIGINT Not Null No
CAMPAIGN_ID The primary key of a campaignrecord.
BIGINT Not Null No
ASSOCIATE_IND Identifies whether this is a targetassociation or regarding association.
CHAR(1) Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
10 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
CATEGORYThe CATEGORY table contains common platform attributes for categories. ACATEGORY can participate in only one hierarchy at a time.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
CATEGORY_ID A unique, system-generated key thatidentifies a category in the system.
BIGINT Not Null Yes
CAT_HIERARCHY_ID A unique, system-generated key thatidentifies a category hierarchy in thesystem.
BIGINT Not Null No
CATEGORY_CODE An identifier for a category within aparticular hierarchy.
VARCHAR(255) Null No
NAME VARCHAR(120) Not Null No
DESCRIPTION Provides extra space for informationthat can be used for an additionaldefinition or as free form commentsto provide further meaning.
VARCHAR(255) Null No
IS_ROOT Indicates that the category is root inthe hierarchy (ultimate parent).
CHAR(1) Not Null No
IS_LEAF Indicates if the category can havesubcategories or not.
CHAR(1) Not Null No
ASSOC_IND Indicates if the category permitsassociations to be made with it (i.e.,product-category).
CHAR(1) Not Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
Chapter 1. Tables 11
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
CATEGORYNLSThe CATEGORYNLS table contains the language sensitive fields for theCATEGORY table.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
CATEGORY_NLS_ID A unique, system-generated key thatidentifies a localized category in thesystem.
BIGINT Not Null Yes
CATEGORY_ID The primary key of the categoryrecord.
BIGINT Not Null No
LANG_TP_CD Language type code. BIGINT Not Null No
NAME Localized name for the categoryname.
VARCHAR(120) Not Null No
DESCRIPTION Localized description for the categorydescription.
VARCHAR(255) Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
12 InfoSphere MDM 11.0: MDM Physical Data Dictionary
CATEQUIVThe CATEQUIV table contains information about a category equivalency.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
CAT_EQUIV_ID A unique, system-generated key thatidentifies a category equivalency inthe system.
BIGINT Not Null Yes
CATEGORY_ID A unique, system-generated key thatidentifies a category in the system.
BIGINT Not Null No
ADMIN_SYS_TP_CD Administration System Code uniquelyidentifies the administrative sourcesystem for a contract. Examplesinclude Ingenium, Alltel, Huon, etc.
BIGINT Not Null No
CAT_EQUIV_KEY A key, or ID, that uniquely identifiesthe category in the administrativesource system.
VARCHAR(160) Null No
KEY_1 A partial key, which in conjunctionwith other keys, identifies thecategory in the administrative sourcesystem.
VARCHAR(30) Not Null No
KEY_2 A partial key, which in conjunctionwith other keys, identifies thecategory in the administrative sourcesystem.
VARCHAR(30) Null No
KEY_3 A partial key, which in conjunctionwith other keys, identifies thecategory in the administrative sourcesystem.
VARCHAR(30) Null No
KEY_4 A partial key, which in conjunctionwith other keys, identifies thecategory in the administrative sourcesystem.
VARCHAR(30) Null No
KEY_5 A partial key, which in conjunctionwith other keys, identifies thecategory in the administrative sourcesystem.
VARCHAR(30) Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
Chapter 1. Tables 13
Name Comment Datatype Null Option Is PK
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
CATHIERARCHYThe CATHIERARCHY table contains information about a category hierarchy.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
CAT_HIERARCHY_ID A unique, system-generated key thatidentifies a category hierarchy in thesystem.
BIGINT Not Null Yes
NAME A short, meaningful label for thecategory hierarchy.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra space for informationthat can be used for an additionaldefinition or as free form commentsto provide further meaning.
VARCHAR(255) Null No
HIERARCHY_TP_CD Code indicating the categoryhierarchy type.
BIGINT Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
14 InfoSphere MDM 11.0: MDM Physical Data Dictionary
CATHIERARCHYNLSThe CATHIERARCHYNLS table contains the language sensitive fields for theCATHIERARCHY table.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
CAT_HIERARCHY_NLS_ID
A unique, system-generated key thatidentifies a category hierarchy NLSrecord in the system.
BIGINT Not Null Yes
CAT_HIERARCHY_ID The primary key of the NLS categoryhierarchy record.
BIGINT Not Null No
LANG_TP_CD Language type code. BIGINT Not Null No
NAME Localized name for the categoryhierarchy name.
VARCHAR(120) Not Null No
DESCRIPTION Localized description for the categoryhierarchy description.
VARCHAR(255) Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
CATNODERELThe CATNODEREL table contains the definition of relationships between categorynodes in a category hierarchy.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
CAT_NODE_REL_ID A unique, system-generated key thatidentifies a category node relationshipin the system.
BIGINT Not Null Yes
PARENT_NODE_ID The primary key (category_id) of theparent hierarchy node record.
BIGINT Not Null No
CHILD_NODE_ID The primary key (category_id) of thechild hierarchy node record.
BIGINT Not Null No
Chapter 1. Tables 15
Name Comment Datatype Null Option Is PK
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
CDACCETOCOMPTPThe CDACCETOCOMPTP table describes the type of access a CONTACT has to acomputer and to current and future related technologies. For example, computersor videophones.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
ACCE_COMP_TP_CD Represents one of the various types ofaccess a party can have to a computerand related technologies.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
16 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDACCOUNTREQUIREDTPThe CDACCOUNTREQUIREDTP table contains information about the accountrequirement type codes for the FINANCIALPRODUCT table.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such as English,French, Spanish, or German. When used as partof the primary key of a code value lookup table,the Language Type Code also represents thelanguage of the code name.
BIGINT Not Null Yes
ACCOUNT_REQUIRED_TP_CD Indicates whether the product requires anaccount or not.
BIGINT Not Null Yes
NAME A short, meaningful label for the value of thetype code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either as anadditional definition of the type code value or asfree form user comments to provide furthermeaning to the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is no longer valid. TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated, this field isupdated with the date and time. On subsequentupdates, the system uses this information toensure that the update request includes amatching date and time on this field; if it doesnot, the update fails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updated the data. VARCHAR(20) Null No
CDACCOUNTTPThe CDACCOUNTTP table contains values for the account type code and itsdescriptions. For example, "Savings" and "Checking".
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
Chapter 1. Tables 17
Name Comment Datatype Null Option Is PK
ACCT_TP_CD Identifies the type of bank accountprovided by the party. Someexamples are checking, savings, andso forth.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDACTIONADJREASTPThe CDACTIONADJREASTP table identifies the reason that an action, taken as aresult of suspect duplicate identification, was adjusted.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
ADJ_ACTION_TP_CD Identifies the business reasons for theaction code on the suspectidentification being modified.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
18 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDADDRUSAGETPThe CDADDRUSAGETP table contains information about the address usage typecode values, such as primary residence, secondary address, or business address.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
ADDR_USAGE_TP_CD Identifies the usage of an addressprovided by a party.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDADMINFLDNMTPThe CDADMINFLDNMTP table contains the valid values for the native key fieldname type code and its descriptions.
This table is used by the following domain.v Party Domain
Chapter 1. Tables 19
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
ADMIN_FLD_NM_TP_CD
Identifies the field name that thenative key refers to, for example,policy number, policy suffix, accountnumber, branch, and so forth.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Description provides extrainformation, which can be used eitheras an additional definition of the typecode value or as free form commentsused by the user to provide furthermeaning to the type code.
VARCHAR(255) Null No
ADMIN_SYS_TP_CD Uniquely identifies the administrativesource system for a contract.Examples include Ingenium, Alltel,Huon, and so forth.
BIGINT Not Null No
SIZE_NUM The length or number of digits usedby the native key field.
DECIMAL(2,0) Null No
DATATYPE_NAME The name of the datatype for thenative key field.
VARCHAR(40) Null No
DISPLAYED_IND Indicates whether this is the nativekey field to be displayed to the user.
CHAR(1) Null No
PRESENT_SEQ_NUM The order by which the contract'sadministrative source systemunderstands the native key fields.
SMALLINT Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDADMINSYSTP
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD BIGINT Not Null Yes
ADMIN_SYS_TP_CD BIGINT Not Null Yes
NATIVE_KEY_TOT SMALLINT Null No
20 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
NAME VARCHAR(120) Null No
DESCRIPTION VARCHAR(255) Null No
EXPIRY_DT TIMESTAMP Null No
LAST_UPDATE_DT TIMESTAMP Not Null No
CDAGEVERDOCTPThe CDAGEVERDOCTP table contains the age verification type code values andtheir descriptions.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
AGE_VER_DOC_TP_CD An identifier that uniquely separatesone type of document being used toverify a client's age from another.Examples include birth certificate,driver's license, and so forth.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDAGREEMENTSTTPThe CDAGREEMENTSTTP table stores the valid status of an agreement. Forexample, Draft, Normal, or Suspended.
This table is used by the following domain.v Account Domain
Chapter 1. Tables 21
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
AGREEMENT_ST_TP_CD
Identifies the status of the contract asprovided by the administrative sourcesystems. For example, a bank mighthave the contract status types "active","pending", "lapse pending", and"cancelled".
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDAGREEMENTTPThe CDAGREEMENTTP table stores the agreement type. For example,ValuePackage.
This table is used by the following domain.v Account Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
AGREEMENT_TP_CD Describes the type of the contract.Some examples include ValuePackage, or Supplier Agreement.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
22 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDARRANGEMENTTPThe CDARRANGEMENTTP table contains the values and descriptions of thearrangement type code, describing the role that the CONTACT plays on anAGREEMENT. For examples, a time delay arrangement can be active on the role.For example, if a contact is the beneficiary on an insurance contract, that contactcan only receive the benefit if the contact happens to die in the same accident asthe insured person, but only if that contact survived the insured person by acertain length of time; otherwise, if both die at the same time, the proceeds will goto the insured's contingent beneficiary.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
ARRANGEMENT_TP_CD
Describes the type of agreement thatthe party contract role has with thecontract. For example: time delayarrangement such as a commondisaster.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
Chapter 1. Tables 23
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDAVAILABILITYTPThe CDAVAILABILITYTP table contains information about how widely available aPRODUCT is to its target market.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
AVAILABILITY_TP_CD The availability status of the productwith respect to its target market.Determines whether the product isgenerally available, or has restrictedavailability.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
24 InfoSphere MDM 11.0: MDM Physical Data Dictionary
CDBILLINGSTTPThe CDBILLINGSTTP table contains the status values and descriptions for a billingtype. For example, "Closed", "Paid", "Pending" and "Disputed".
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
BILLING_ST_TP_CD A unique type code which uniquelydefines a billing status value. Someexamples are closed, paid, and soforth.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDBILLTPThe CDBILLTP table contains the values for the bill type code and its descriptions.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
Chapter 1. Tables 25
Name Comment Datatype Null Option Is PK
BILL_TP_CD An identifier that uniquely separatesone billing type from another.Examples include Regular, Direct,Payroll deduction, and so forth.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDBUYSELLAGREETPThe CDBUYSELLAGREETP table contains the buy sell agreement type code valuesand their descriptions. For example, Cross purchase, or Hybrid.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
BUY_SELL_AGR_TP_CD An identifier that uniquely separatesone type of buy-sell agreement fromanother.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
26 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDCAMPAIGNTPThe CDCAMPAIGNTP table identifies the type of campaign.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
CAMPAIGN_TP_CD A numeric representation of thecampaign for customer.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDCDCREJREASONTPThe CDCDCREJREASONTP table stores the reason type detailing why a criticaldata change is rejected. For example, Created in error, or Withdrawn by customer.
This table is used by the following domain.v Party Domain
Chapter 1. Tables 27
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
REJ_REASON_TP_CD The reason for which a critical datachange has been rejected.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDCDCSTTPThe CDCDCSTTP table stores the status type of a critical data change request. Forexample, Change rejected, or Change accepted.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
CDC_ST_TP_CD The type code indicating the status ofthe critical data change request.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
28 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDCHARGECARDTPThe CDCHARGECARDTP table contains the charge card type code values andtheir descriptions. For example, Visa, MasterCard, or American Express.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
CHARGE_CARD_TP_CD Identifies one type of charge cardfrom another. Some examples areVisa, MasterCard, or AmericanExpress.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
Chapter 1. Tables 29
CDCLAIMROLETPThe CDCLAIMROLETP table contains the claim role type code values and theirdescriptions. For example, "Claimant", "Third Party", "Witness", and "Adjuster".
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
CLAIM_ROLE_TP_CD A type of role a party plays on aclaim. Some examples includeClaimant, Witness and Third Party.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDCLAIMSTATUSTPThe CDCLAIMSTATUSTP table contains the claim status type code values andtheir descriptions. For example, "Pending", "Closed", "Open" and "Rejected".
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
CLAIM_STATUS_TP_CD Identifies the status of a claim. Someexamples include Pending, Closedand Rejected.
BIGINT Not Null Yes
30 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDCLAIMTPThe CDCLAIMTP table contains the claim type code values and their descriptions.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
CLAIM_TP_CD The type of claim that is recorded.For example, Fire, Theft, Automobile,Collision, and so forth.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
Chapter 1. Tables 31
CDCLIENTIMPTPThe CDCLIENTIMPTP contains the client importance type code values and theirdescriptions. The importance type can be used to indicated VIP situations or otherspecial services that can be applied to this contact.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
CLIENT_IMP_TP_CD An identifier that uniquely separatesone client importance type fromanother. Examples include high,medium, and low.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDCLIENTPOTENTPThe CDCLIENTPOTENTP table represents the party potential type code and itsdescriptions.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
32 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
CLIENT_POTEN_TP_CD An identifier that uniquely separatesone client potential type from another.For example, an insurance providermight have the potential types"client", "prospect" and"non-potential".
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDCLIENTSTTPThe CDCLIENTSTTP table represents the party status type code value and itsdescription.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
CLIENT_ST_TP_CD An identifier that uniquely separatesone client status type from another.For example, a telecommunicationscompany might have the client statustypes "active", "inactive", and"pending".
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
Chapter 1. Tables 33
Name Comment Datatype Null Option Is PK
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDCONDITIONATTRIBUTETPThe CDCONDITIONATTRIBUTETP table serves as a means to group conditionattributes, allowing a second level of granularity. For example, Core Account Type,Annual Interest rate, and Minimum Charge.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
CONDITION_ATTR_TP_CD
Describes the attribute type of thecondition. For example, "CoreAccount Type", "Status", and "InterestRate".
BIGINT Not Null Yes
CONDITION_USAGE_TP_CD
Describes the usage types for acondition. For example, "ValuePackage Integrity", "Rate", "Fee", or"Balance".
BIGINT Not Null No
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
34 InfoSphere MDM 11.0: MDM Physical Data Dictionary
CDCONDITIONOWNERTPThe CDCONDITIONOWNERTP table describes the Terms and Conditionscomponent owner type. For example, PRODUCT or CONTRACT.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
CONDITION_OWNER_TP_CD
Identifies the owner of the condition. BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDCONDITIONUSAGETPThe CDCONDITIONUSAGETP table serves as a means to group condition types.For example: ValuePackage Integrity, Rate Fee.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
CONDITION_USAGE_TP_CD
Describes the usage types for a termand condition. For example, "ValuePackage Integrity", "Rate", "Fee", or"Balance".
BIGINT Not Null Yes
Chapter 1. Tables 35
Name Comment Datatype Null Option Is PK
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
RULE_ID The associated business rule ID. VARCHAR(10) Null No
CDCONTMETHCATThe CDCONTMETHCAT table contains information on the contact methodcategory type code values and their descriptions. For example, phone, e-mail, orPDA.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
CONT_METH_CAT_CD Identifies the type of contact method.For example: telephone, e-mail, PDA,and so forth.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
36 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDCONTMETHTPThe CDCONTMETHTP table contains information on the valid values for thecontact method type code. For example, primary phone number and cell phonenumber.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
CONT_METH_TP_CD Identifies the subtypes of a ContactMethod Category Type Code. Forexample, if the category type istelephone, then the values of thesubtype code are home, business, cellphone, and so forth.
BIGINT Not Null Yes
CONT_METH_CAT_CD Identifies the type of contact method.For example: telephone, e-mail, PDA,and so forth.
BIGINT Not Null No
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
Chapter 1. Tables 37
CDCONTRACTRELSTTPThe CDCONTRACTRELSTTP table contains the values and descriptions for thecontract relationship status code, which identifies the status of a relationship. Forexample, "pending," "active," and "terminated".
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
CONTR_REL_ST_TP_CD Identifies the status of therelationship between two contracts,for example, "pending", "active", and"terminated."
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDCONTRACTRELTPThe CDCONTRACTRELTP table contains the values and descriptions for thecontract relationship type code, which identifies the purpose for a relationship.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
38 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
CONTR_REL_TP_CD Describes the type of a relationship.Reciprocal in nature, examplesinclude child and parent, andsupports and supported-by.
BIGINT Not Null Yes
TO_FROM_NAME A short, meaningful label for the "to"value of the relationship.
VARCHAR(120) Not Null No
FROM_TO_NAME A short, meaningful label for the"from" value of the relationship.
VARCHAR(120) Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDCONTRACTROLETPThe CDCONTRACTROLETP table represents the contract role type code valuesand their descriptions. For example, Owner, Beneficiary, Insured, or Payer.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
CONTR_ROLE_TP_CD Identifies the type of role that a partycan have on a contract. For example,an insurance provider might have thecontract role types "beneficiary,""owner," "insured," and "payer".
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
Chapter 1. Tables 39
Name Comment Datatype Null Option Is PK
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDCONTRACTSTTPThe CDCONTRACTSTTP table contains the contract status type code values andtheir descriptions.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
CONTRACT_ST_TP_CD Identifies the status of the contract.These values are provided by theadministrative source systems of thecontract. For example, a bank mighthave the contract status types "active,""pending," lapse pending," and"cancelled".
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
40 InfoSphere MDM 11.0: MDM Physical Data Dictionary
CDCONTRCOMPTPThe CDCONTRCOMPTP table contains the values and descriptions for the contractcomponent type codes that describe the type of component. For example, base,rider, or base increase.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
CONTR_COMP_TP_CD A numeric representation of the typeof coverage for the product. Forexample, Base, Rider, Base Increase,or Integrated.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDCOUNTRYTPThe CDCOUNTRYTP table contains the country type code value and itsdescriptions. For example, "USA", "Canada", or "England".
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
COUNTRY_TP_CD Identifies a country. BIGINT Not Null Yes
Chapter 1. Tables 41
Name Comment Datatype Null Option Is PK
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
ISO_CODE CHAR(2) Null No
CDCURRENCYTPThe CDCURRENCYTP table contains the currency type code and its descriptions.For example, Euro, US Dollar, Japanese Yen, British Pound.
This table is used by the following domains.v Party Domainv Product Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
CURRENCY_TP_CD Identifies the currency of the amountcolumns.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
42 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CURRENCY_CODE The standard currency code for thecurrency.
CHAR(3) Null No
CDDEMOGRAPHICSTPThe CDDEMOGRAPHICSTP table defines demographics types.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
DEMOGRAPHICS_TP_CD
The Demographics ID identifies thetype of the demographics record.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
SPEC_ID The ID of the Spec used for thedemographics type.
BIGINT Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
Chapter 1. Tables 43
CDDOMAINTPThe CDDOMAINTP table contains values and descriptions for the domain typecode that defines the business area of the agreement component values.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
DOMAIN_TP_CD Defines the types of values can bestored. For example, Integer, String,Decimal, Date, and so forth.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDDOMAINVALUETPThe CDDOMAINVALUETP table contains the values and descriptions for theValue Type Code, which, in a given domain, identifies the values that are captured.For example, within banking, values captured can be "account balance" and"account deposit".
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
44 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
DOMAIN_VALUE_TP_CD
Domain Value Type Code, in a givendomain, identifies the specific valuesthat are captured. For example:Integer value, Date value, and soforth.
BIGINT Not Null Yes
PROD_TP_CD Identifies the type of productassociated with the contract (or atsome level within the product family).For example, a manufacturingcompany might have the producttypes "precision tools", "switches","defence", "electronics", and"automotive".
BIGINT Null No
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
DOMAIN_TP_CD Defines the types of values can bestored. Examples include Integer,String, Decimal, Date, and so forth.
BIGINT Not Null No
PRECISION_VALUE Defines the Value String attribute inthe Contract Component Value byidentifying the number of digits to beexpected for that given Value TypeCode.
SMALLINT Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDEMEMATCHFUNCTIONTPThis table represent the IBM InfoSphere MDM Probabilistic Matching Enginematch function details. A match function is a component of a larger algorithm thatcompares the data for two entities and derives a score based on their likenesses.The match function determines if a subset of the data in an entity (for example astreet number, a phone number, a first name, a last name, and so forth) are thesame, different, or similar (that is, a partial match), and so forth.
This table is used by the following domain.v Party Domain
Chapter 1. Tables 45
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
MATCH_FUNCTION_TP_CD
The match function type code is anumerical value returned from eMEengine that represents the results of amatching function that was used on aportion of the data. The values can beone of 68, 69, 70, 77, 80, 84, 42.
VARCHAR(5) Not Null Yes
NAME A short, meaningful label for thevalue of the type code. The currentnames for the corresponding typecodes can be: Different, Equal, False,Missing, Partial, True, Unknown.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
CDEMEMATCHWORDTPThis table contains the codes and values for the word-by-word comparisons thateach InfoSphere MDM Probabilistic Matching Engine match function codeperforms (see the CDEMEMATCHFUNCTIONTP table). Some examples of wordcomparisons that are done are Nickname (for example, Nick or Nicholas) andacronym (for example, IBM or International Business Machines).
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
46 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
MATCH_WORD_TP_CD The match word type code is thenumerical value that represents thethe outcome of a comparison of twoindividual words carried out by amatching function. These values canbe : 65, 67, 68, 69, 89, 88, 73, 49, 77,78, 80, 79, 50, 42.
VARCHAR(5) Not Null Yes
NAME A short, meaningful label for thevalue of the type code. The currentnames of the codes are: Acronym,Compound Word Match, Different,Edit Distance, Equal Initials, EqualWord, Initials match word firstcharacter, Left prefix of right, Missing,Nickname, Phonetic, PhoneticNickname Equal, Right prefix of left,Unknown.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
CDENDREASONTPThe CDENDREASONTP table contains the values and descriptions of the endreason type code that identifies why a relationship was ended.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
END_REASON_TP_CD Identifies the cause for why arelationship was ended. For example,a spousal party to party relationshipcan be ended for a "divorce," reason.
BIGINT Not Null Yes
Chapter 1. Tables 47
Name Comment Datatype Null Option Is PK
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDENTITYLINKSTTPThis table lists the entity link status types associated with parties that are persistedfrom virtual MDM. This table is used by the Hybrid MDM functional feature.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
ENTITYLINK_ST_TP_CD Identifies the status of a party that ispersisted from virtual MDM. Forexample, 'Virtual-Owned Entity' or'Persisted View'.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
48 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
CDFREQMODETPThe CDFREQMODETP contains the frequency mode type code values and theirdescriptions. For example, "Weekly", "Monthly", "Quarterly", or "Annual".
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
FREQ_MODE_TP_CD Identifies the frequency of thepayments made on the contract. Forexample, monthly, annual, weekly,daily, and so forth.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
Chapter 1. Tables 49
CDGENERATIONTPThe CDGENERATIONTP table contains familial generational information in theform of a generation name type code. For example, The First, The Second, Junioror Senior.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
GENERATION_TP_CD Identifies familial generationalinformation in the form of ageneration name type code. Forexample, The First, The Second,Junior or Senior.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDHIGHESTEDUTPThe CDHIGHESTEDUTP table contains the highest education type code valuesand their descriptions.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
50 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
HIGHEST_EDU_TP_CD Identifies the highest level ofschooling that this person hasreceived. For example, high school,college, university, or postgraduate.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDHOLDINGTPThe CDHOLDINGTP table contains the holding type code values and theirdescriptions. For example, "Vehicle" or "Property".
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
HOLD_TP_CD Identifies a type of party holding. Forexample: Vehicles, Property, Stocks, orothers.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
Chapter 1. Tables 51
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDIDSTATUSTPThe CDIDSTATUSTP table represents the identification status type code values andtheir descriptions. For example, Applied For, Certified, or Expired.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
ID_STATUS_TP_CD Identifies the status of the identifierprovided by the party. For example,"applied for", "expired", "certified",and so forth.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDIDTPThe CDIDTP table represents the identification type code values and theirdescriptions. For example, social insurance number, social security number, driver'slicense, passport number, or tax registration number.
This table is used by the following domain.
52 InfoSphere MDM 11.0: MDM Physical Data Dictionary
v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
ID_TP_CD Identifies the type of identifierprovided by the party. For example,"social security number," "passport,""driver's license number," and soforth.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
MAX_ALLOWED_NUM Maximum allowed number. SMALLINT Null No
CDINACTREASONTPThe CDINACTREASONTP table contains information on the valid values for theinactivated reason type code. For example, "collapsed", "split", or "deceased".
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
INACT_REASON_TP_CD
Identifies the reason for the partyinformation being inactivated. Forexample, splitting or collapsing ofparty records.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
Chapter 1. Tables 53
Name Comment Datatype Null Option Is PK
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDINCOMESRCTPThe CDINCOMESRCTP table contains information on the valid values for theincome source type code. For example, annual salary and net worth.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
INCOME_SRC_TP_CD Identifies the type of income sourcethat the party provided. For example,"annual salary", "estimated networth", "Ownership of Bonds", and soforth.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
54 InfoSphere MDM 11.0: MDM Physical Data Dictionary
CDINDUSTRYTPThe CDINDUSTRYTP table contains the industry type code values and theirdescriptions. For example, farming, industrial, insurance.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
INDUSTRY_TP_CD Represents the industry type for theorganization. Examples include SIC,and so forth.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDLANGTPThe CDLANGTP table contains the values for the Language Type Code and itsdescriptions. For example, "English", "French", or "Spanish".
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
Chapter 1. Tables 55
Name Comment Datatype Null Option Is PK
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LOCALE The locale string for the languagerecord.
VARCHAR(20) Null No
CODE_TABLE_TRANSLATION
Indicates whether the systemprovides the code table translation forthe given language and locale.
CHAR(1) Null No
CDLINKREASONTPThe CDLINKREASONTP table identifies the reason why two parties are linkedtogether. For example, collapsed, or split.
This table is used by the following domains.v Party Domainv Product Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
LINK_REASON_TP_CD Describes the reason why two partiesare linked. For example, "Sourcecollapsed into target", "Sourceduplicated as target", and so forth.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
56 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDLOBRELTPThe CDLOBRELTP table defines various LOB relationship types. For example,"owner".
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
LOB_REL_TP_CD Identifies the unique type code for aspecific line of business relationshiptype.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDLOBTPThe CDLOBTP table contains the values and descriptions for all of the lines ofbusiness set up in the system.
This table is used by the following domain.v Party Domain
Chapter 1. Tables 57
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
LOB_TP_CD Identifies the unique type code for aspecific line of business.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDMARITALSTTPThe CDMARITALSTTP table contains the marital status type code values and theirdescriptions. For example: "married", "separated", or "widowed".
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
MARITAL_ST_TP_CD Identifies a person's marital status.For example, single, widowed, ordivorced.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
58 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDMATCHENGINETPThe CDMATCHENGINETP table contains the type information and description ofthe matching engine use for matching contacts.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
MATCH_ENG_TP_CD The Matching Engine to use formatching parties.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
Chapter 1. Tables 59
CDMATCHRELEVTPThe CDMATCHRELEVTP table contains the match relevancy type code value andits description. For example, LNAME, SSN and ADDRESS LINE 1.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
MATCH_RELEV_TP_CD Identifies party match relevancies,providing a description of whichelements were matched.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
RELEVENCY_SCORE The score associated with a matchrelevancy type. For example: LNAMEscore = 30.
SMALLINT Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
MATCH_ENG_TP_CD The matching engine used formatching parties.
BIGINT Null No
CDMETADATAINFOTPThe CDMETADATAINFOTP table stores information used to identify metadata.For example, task definition, or spec.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
METADATA_INFO_TP_CD
A code that identifies the metadatainformation.
BIGINT Not Null Yes
60 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
METADATA_KEY Data that defines the value of themetadata information type code. Anexample is: "928749ae-f19c-41b6-babf-380467cea769".
VARCHAR(255) Not Null No
METADATA_PACKAGE_TP_CD
A code that identifies the metadatapackage.
BIGINT Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDMETADATAPACKAGETPThe CDMETADATAPACKAGETP table stores a list of meta data package namesused to identify the location of metadata in the system. For example, taskdefinition, or spec. Stores a list of meta data package names, which are used toidentify the location of the metadata in system, such as task definition and spec.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
METADATA_PACKAGE_TP_CD
A code that identifies the metadatapackage.
BIGINT Not Null Yes
METADATA_PACKAGE_NAME
Data that defines the value of ametadata package type code. Forexample, "com.ibm.mdm.System".
VARCHAR(255) Not Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDMETHODSTATUSTPThe CDMETHODSTATUSTP table contains the values and descriptions for thecontact method status type code. For example, "disconnected", "unlisted", or "nolonger available".
This table is used by the following domain.v Party Domain
Chapter 1. Tables 61
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
METHOD_ST_TP_CD Identifies the status of a contactmethod. For example, disconnected orcancelled.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDMISCVALUEATTRTPThe CDMISCVALUEATTRTP table contains miscellaneous value attributes typesthat are captured.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
VALUEATTR_TP_CD The miscvalue attribute can be usedto provide more informationregarding a miscellaneous value typesuch as status, effective date, createddate and so forth, or the miscvalueattribute type can be used to populatemultiple values for a party.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Null No
62 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDMISCVALUECATThe CDMISCVALUECAT table categorizes types of miscellaneous values. Forexample, demographic category, risk category, or standard industry codes.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
MISCVALUE_CAT_CD The category allows institutions toclassify the different types of values.Some examples are DemographicCategory, Risk Category, StandardIndustry Codes,Party, Billing, Addressand so forth.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
Chapter 1. Tables 63
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDMISCVALUETPThe CDMISCVALUETP table identifies miscellaneous value types that arecaptured. These attributes can be different value attribute types for a miscellaneousvalue type, or they can be additional information about a particular miscellaneoustype such as status, effective date, created date, or indicator.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
MISCVALUE_TP_CD This is the miscellaneous value typethat corresponds to a particularmiscellaneous value category. Someexamples of miscvalue type arenumber of employees, gold value,credit card risk score, loyalty,profitability and so forth.
BIGINT Not Null Yes
MISCVALUE_CAT_CD The category allows institutions toclassify the different types of values.Some examples are DemographicCategory, Risk Category, StandardIndustry Codes, Party, Billing,Address and so forth.
BIGINT Null No
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
64 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDNAMEUSAGETPThe CDNAMEUSAGETP table contains the name usage type code value and itsdescription. For example, legal name, nickname, or maiden name.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
NAME_USAGE_TP_CD Identifies the type of name for thisperson. For example, "Legal," "NickName," "Maiden Name," and so forth.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
MAX_ALLOWED_NUM The greatest number of times a givenPerson Name Usage Type Code canbe used.
SMALLINT Null No
Chapter 1. Tables 65
CDNODETPThe CDNODETP table captures metadata regarding how the subtype isrepresented within the product type hierarchy.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
NODE_TP_CD Identifies whether the product type isthe root type, a hardened type (i.e. asub-type defined through physicaltables), or a soft type (i.e. a sub-typedefined through specs).
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDORGNAMETPThe CDORGNAMETP table contains the organization name type code values andtheir descriptions. For example, "doing business as", "abbreviated name", or "legalname".
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
66 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
ORG_NAME_TP_CD Identifies the type of name for thisorganization. For example, "Legal","Doing Business As", "Abbreviated",and so forth.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
MAX_ALLOWED_NUM The maximum number of activeorganization name types allowed.Null means an unlimited number isallowed.
SMALLINT Null No
CDORGTPThe CDORGTP table contains information on organization type code values. Forexample, charity, trust, estate, or corporation.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
ORG_TP_CD Identifies the classification of theorganization. For example, trust,company, charity, estate, and so forth.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
Chapter 1. Tables 67
Name Comment Datatype Null Option Is PK
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDPAYMENTMETHODTPThe CDPAYMENTMETHODTP table contains various payment method type valuesand their descriptions. For example, "cash", "cheque", or "payroll deduction".
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
PYMT_MTHD_TP_CD A type code which uniquely identifiesa payment method value in thesystem. For example, bank account,charge card, cash, and so forth.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
68 InfoSphere MDM 11.0: MDM Physical Data Dictionary
CDPPREFACTIONTPThe CDPPREFACTIONTP table contains the values of the privacy preference actiontype code and its descriptions. For example, "Call", "Do not call", "Opt In", or "OptOut".
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
PPREF_ACTION_TP_CD Identifies the action to be taken basedon the privacy preference set by thecustomer or by company defaultsetting. For example, Call only, Mailonly, Do not call, Do not mail.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDPPREFCATThe CDPPREFCAT table contains a high level categorization of privacy preferencestypes.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
Chapter 1. Tables 69
Name Comment Datatype Null Option Is PK
PPREF_CAT_CD Identifies the high level category ofthe privacy preference for thecustomer. For example, Sharing ofData, Solicitation, and so forth.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDPPREFREASONTPThe CDPPREFREASONTP identifies the reason for a privacy preference element.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
PPREF_REASON_TP_CD Identifies the reason given bycustomer for making a privacypreference selection.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
70 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDPPREFSEGTPThe CDPPREFSEGTP table stores the segment that a privacy preference regulationapplies to. This can be based on geography or a particular segment.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
PPREF_SEG_TP_CD Identifies the segment associated withthe privacy preference record. Forexample, FCRA, FCC, and so forth.
BIGINT Not Null Yes
PROV_STATE_TP_CD Identifies US States, Possessions,overseas military locations, as well asnon-US country provinces. Foroverseas military locations, APO orFPO designations are used along witha "state" abbreviation, AE, AP, or AA,and the ZIP code.
BIGINT Null No
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
Chapter 1. Tables 71
CDPPREFTPThe CDPPREFTP table contains the various types of privacy preferenceinformation.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
PPREF_TP_CD The specific privacy preference typewithin a particular category. Forexample: Credit Info, Personal Info,and so forth.
BIGINT Not Null Yes
PPREF_CAT_CD Privacy Preference Category Codeidentifies the high level category ofthe privacy preference for thecustomer. For example: Sharing ofData, Solicitation, and so forth.
BIGINT Null No
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDPREFIXNAMETPThe CDPREFIXNAMETP table contains information on a person's name prefix typecode. For example, Mr., Mrs., Dr., or others.
This table is used by the following domain.v Party Domain
72 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
PREFIX_NAME_TP_CD Identifies the party's name prefix. Forexample, Mr., Mrs., Dr., and so forth.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDPRIMARYTARGETMARKETTPThe CDPRIMARYTARGETMARKETTP table captures information about theprimary market that a product targets.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
PRIMARY_TARGET_MARKET_TP_CD
A primary market this producttargets. For example, "RetailCustomer", "SMB", or "LargeCorporate".
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
Chapter 1. Tables 73
Name Comment Datatype Null Option Is PK
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
CDPRIORITYCATTPThe CDPRIORITYCATTP table contains the various priority categories that apriority type can belong to. "Task" is a typical priority category that is specificallyused by Task Management services.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
PRIORITY_CAT_TP_CD A code that classifies the varioustypes of priority. An example of it is"Task".
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
74 InfoSphere MDM 11.0: MDM Physical Data Dictionary
CDPRIORITYTPThe CDPRIORITYTP table contains the various priorities for campaigns and thelike, and includes values such as high, medium, low.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
PRIORITY_TP_CD Identifies the priority of a task, acampaign, value and so forth.Examples include high, medium, low.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
PRIORITY_CAT_TP_CD A code that classifies the varioustypes of priority. An example of apriority category type code is "Task".
BIGINT Null No
CDPRODCONTRACTRELTPThe CDPRODCONTRACTRELTP table holds information on the type ofrelationship a product has with a contract.
This table is used by the following domain.v Account Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
Chapter 1. Tables 75
Name Comment Datatype Null Option Is PK
PROD_CONTR_REL_TP_CD
Identifies the type of the ProductContract Relationship. For example,"Party Selection".
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDPRODRELATIONTPThe CDPRODRELATIONTP table holds information about the type of relationshipheld between two products.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
PRODUCT_REL_TP_CD Identifies the type of relationship thattwo products can have between oneanother.
BIGINT Not Null Yes
FROM_TO_NAME A short, meaningful description forthe "FROM" value of the relationship.For example, "Product 1 is the bundlefor Product 2". This value determinesthe relative direction for therelationship.
VARCHAR(120) Null No
TO_FROM_NAME A short, meaningful description forthe "TO" value of the relationship. Forexample, "Product 2 is the bundlemember for Product 1". This valuedetermines the relative direction forthe relationship.
VARCHAR(120) Not Null No
76 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDPRODRELTPThe CDPRODRELTP table identifies all the relationship types that can existbetween products.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
PRODREL_TP_CD Identifies the type of relationship thattwo products can have between oneanother.
BIGINT Not Null Yes
FROM_TO_NAME A short, meaningful label for the"from" value of the type code.
VARCHAR(120) Null No
TO_FROM_NAME A short, meaningful label for the "to"value of the type code.
VARCHAR(120) Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
Chapter 1. Tables 77
CDPRODSTRUCTURETPThe CDPRODSTRUCTURETP table captures information concerning how aproduct is structured.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
PROD_STRUC_TP_CD Identifies whether the product is astandalone product or represents abundling of other componentproducts.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
STRATEGY_RULE_ID The rule ID of the correspondingproduct structure. For example, abundled product can have a defaultstrategy_rule_id of 192 because thisID corresponds to the BundleStrategyrule.
VARCHAR(10) Null No
CDPRODTPThe CDPRODTP table contains the product type code values and theirdescriptions.
This table is used by the following domain.v Party Domain
78 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
PROD_TP_CD Identifies the type of productassociated with the contract (or atsome level within the product family).For example, a manufacturingcompany might have the producttypes "precision tools", "switches","defence", "electronics", and"automotive".
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
PROD_SOURCE Identifies the source of the code. VARCHAR(100) Null No
CDPRODUCTIDENTIFIERTPThe CDPRODUCTIDENTIFIERTP table captures information about the productidentifier type code.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
Chapter 1. Tables 79
Name Comment Datatype Null Option Is PK
PRODUCT_IDENTIFIER_TP_CD
Identifies the type of identifier for theproduct. For financial products,examples include an "InternationalSecurities Identification Number","National Securities IdentificationNumber", etc.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
MAX_ALLOWED_NUM Represents the maximum number ofactive identifiers that can be added tothe same product for the sameidentifier type.
SMALLINT Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDPRODUCTPARTYROLETPThe CDPRODUCTPARTYROLETP contains the product party role type code andits descriptions.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
PRODUCT_PARTY_ROLE_TP_CD
A unique, system-generated key thatidentifies a product party role in thesystem. It identifies the type of rolethat a party can have on a product.For example "Supplier", "Vendor","Retailer", "Item Analyst", or"Consumer".
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
80 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
CDPRODUCTSTATUSTPThe CDPRODUCTSTATUSTP table captures information about the lifecycle statusof a product.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
STATUS_TP_CD The lifecycle status of the product.For example, "Available","Unavailable", "Obsolete", etc.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
Chapter 1. Tables 81
Name Comment Datatype Null Option Is PK
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
CDPROVSTATETPThe CDPROVSTATETP table contains province or state type code values. Forexample, WA, NJ, ON, or BC.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
PROV_STATE_TP_CD Identifies US States, Possessions,overseas military locations, as well asnon-US country provinces. Foroverseas military locations, APO orFPO designations are used along witha "state" abbreviation, AE, AP, or AA,and the ZIP code.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDPURPOSETPThe CDPURPOSETP table identifies the purpose for a location as it relates to a roleon a contract. For example, statements are sent to the location for the owner of acontract.
This table is used by the following domain.v Party Domain
82 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
PURPOSE_TP_CD Identifies the purpose for the locationas it relates to a role on a contract.For example, the owner's residenceaddress is associated with the contractfor the purpose of sendingstatements.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDRELASSIGNTPThe CDRELASSIGNTP table contains the relationship assignment type code valuesand its descriptions. Party-to-party relationships can be assigned by a court orderor judgment, or by another party.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
REL_ASSIGN_TP_CD Identifies how the relationshipbetween the parties has beenassigned. For example, a custodialrelationship between a minor and anadult can be created by a court order.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Null No
Chapter 1. Tables 83
Name Comment Datatype Null Option Is PK
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDRELTPThe CDRELTP table contains trackable information about relationships thatcontacts can have among one another. For each relationship, there is a "from" and a"to" contact, and the relationship is usually named differently depending on whichcontact is made the "to" contact.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
REL_TP_CD Identifies the type of relationship thattwo parties can have between oneanother. For example: "is parent of" or"is employer of".
BIGINT Not Null Yes
FROM_TO_NAME A short, meaningful label for the"from" value of the relationship.
VARCHAR(120) Null No
TO_FROM_NAME A short, meaningful label for the "to"value of the relationship.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
84 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDREPOSITORYTPThe CDREPOSITORYTP table stores information about the content managementsystems and its related repositories for an organization.
This table is used by the following domains.v Account Domainv Product Domain
Name Comment Datatype Null Option Is PK
REPOSITORY_TP_CD Uniquely identifies the CMSRepository.
BIGINT Not Null Yes
NAME Name of the repository, can point tothe jndi name, connector name of theIICE etc.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
CONTENT_SYSTEM The name of the CMS system. VARCHAR(250) Null No
NO_OF_KEYS Number of parameters defined by theCMS System, to uniquely identify acontent.
BIGINT Not Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDRESIDENCETPThe CDRESIDENCETP table contains the residence type code values and theirdescriptions. For example, "suite", "apartment", or "building".
This table is used by the following domain.v Party Domain
Chapter 1. Tables 85
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
RESIDENCE_TP_CD Identifies a type of residence for agiven address. Some examplesinclude Home, Apartment, and Suite.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDRESOLUTIONTPThis table contains the values of the entity resolution types and their descriptions.For example, collapsing, merging, or splitting a product record.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
RESOLUTION_TP_CD Identifies the current resolution for aparticular entity record. For example,collapsing, merging, or splitting aproduct record.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
86 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
CDROLECATTPThe CDROLECATTP table contains a high-level categorization of types for roles.For example, grouping roles, hierarchy roles, relationship roles, and party macroroles.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
ROLE_CAT_TP_CD This is the role category type code. BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
Chapter 1. Tables 87
CDROLETPThe CDROLETP table identifies various role types in the system. For example,"head of household" or "prospect".
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
ROLE_TP_CD This is the role type, whichcorresponds to a particular rolecategory. Some examples include"head of household", "OnlineCustomer", "Prospect" etc.
BIGINT Not Null Yes
ROLE_CAT_TP_CD The category allows institutions toclassify the different types of roles.Some examples are Party RelationshipRoles, Hierarchy Roles, GroupingRoles, and so forth.
BIGINT Null No
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDRPTINGFREQTPThe CDRPTINGFREQTP table contains the reporting frequency type code valuesand their descriptions.
This table is used by the following domain.v Party Domain
88 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
RPTING_FREQ_TP_CD Describes the frequency that aparticular Party (CONTACT) wouldlike to receive consolidatedstatements. Sample values includeannually, semi-annually, monthly, andso forth.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDSERVICELEVELTPThe CDSERVICELEVELTP stores the service level agreements for an agreement.For example, "Service during business hours only" or "Service 24/7 through a callcenter".
This table is used by the following domain.v Account Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
SERVICE_LEVEL_TP_CD Identifies the Service level associatedwith the contract. Some examplesinclude 24/7 call centre service orService during business hours only.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
Chapter 1. Tables 89
Name Comment Datatype Null Option Is PK
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDSHAREDISTTPThe CDSHAREDISTTP table contains the values and descriptions of the sharedistribution type code that defines how the proceeds of the contract are distributedamong the party contract roles.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
SHARE_DIST_TP_CD Identifies how the proceeds of thecontract component get distributedamong the associated party contractroles. Examples include equal shares,50% share, and so on.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
90 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDSOURCEIDENTTPThe CDSOURCEIDENTTP table contains the type codes describing what the sourceidentifier values represent in the default source value table.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
SOURCE_IDENT_TP_CD Identifies the type for the sourceidentifier.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDSPECCASCADETPThe CDSPECCASCADETP table captures information about the type of cascadeaction a spec will have in a hierarchy.
This table is used by the following domain.v Product Domain
Chapter 1. Tables 91
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
SPEC_CASCADE_TP_CD The cascade action the spec will havein a hierarchy. For example,"Cascaded to descendents", "Notcascaded to descendents", and soforth.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDSPECUSETPThe CDSPECUSETP table captures information about the usage types a spec willbe used for.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
SPEC_USE_TP_CD The usage type that dictates how thespec will be used. For example, thespec could be used to govern productcommon attribute values.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
92 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDSTATUSREASONTPThe CDSTATUSREASONTP table captures information about the reason a productis in its current state.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
STATUS_REASON_TP_CD
Identifies the reason why the productis in its current state.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
Chapter 1. Tables 93
CDSUSPECTREASONTPThe CDSUSPECTREASONTP table describes the relevancy of a potential suspectduplicate for a particular party. For example, all elements for the party and thesuspect matched.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
SUSP_REASON_TP_CD Identifies the field that caused thedata match to occur.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
REASON_SCORE Reason Score is the numeric scoreassociated with the suspect reasoncode.
SMALLINT Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
MATCH_ENG_TP_CD The matching engine used formatching parties.
BIGINT Null No
CDSUSPECTSOURCETPThe CDSUSPECTSOURCETP table indicates how a potential suspect duplicate wasidentified. For example, system-marked, or user-marked.
This table is used by the following domain.v Party Domain
94 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
SUSP_SOURCE_TP_CD Identifies the source of the SuspectReason Code: system-marked oruser-marked.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDSUSPECTSTATUSTPThe CDSUSPECTSTATUSTP describes the current status of the investigation into apotential suspect duplicate. For example, "parties not duplicate", or "critical changeresolved".
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
SUSP_ST_TP_CD Indicates the current situation for aparticular suspect record. Forexample, suspect duplicate, notduplicate, under investigation, and soforth.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
Chapter 1. Tables 95
Name Comment Datatype Null Option Is PK
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDSUSPECTTPThe CDSUSPECTTP table enables the replacement of default suspect duplicateprocessing logic with custom implementation. It also provides hooks to integratewith third party software to perform suspect search and matching.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
SUSPECT_TP_CD Captures various suspect types. Onerecord exists for each uniqueadd_action_code in theADDACTIONTYPE table.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
RULE_ID Primary key of the External RuleRecord.
VARCHAR(10) Not Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
96 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDTAXPOSITIONTPThe CDTAXPOSITIONTP table captures information about the relative tax positionoffered by a product.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
TAX_POSITION_TP_CD The relative tax position offered bythe product. Determines whether theproduct is tax neutral, provides thecustomer a tax advantage, or providesthe FI with a tax advantage.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
Chapter 1. Tables 97
CDTERMINATIONREASONTPThe CDTERMINATIONREASONTP table stores termination reasons for anagreement. For example, "Agreement terms & conditions violation" in the case of avalue package breakage.
This table is used by the following domain.v Account Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
TERMINATION_REASON_TP_CD
Describes the reason why the contractis terminated. For example : "Terms &Conditions violated", "Core accountclosed by owner"
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDUNDELREASONTPThe CDUNDELREASONTP table contains information on the valid values for theundeliverable reason type code. For example, bad addresses, incorrect zip code,and so on.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
98 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
UNDEL_REASON_TP_CD
Identifies the reason for not using aparticular address. Some examplevalues are "returned mail", "change inZIP code", and so forth.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
CDUSERROLETPCode Table for storing User Role Types. Each Type specific functions/data that auser can use within the application
Name Comment Datatype Null Option Is PK
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Not Null Yes
USER_ROLE_TP_CD The type code uniquely identifyingthe user role.
BIGINT Not Null Yes
NAME A short, meaningful label for thevalue of the type code.
VARCHAR(120) Not Null No
DESCRIPTION Provides extra information either asan additional definition of the typecode value or as free form usercomments to provide further meaningto the type code.
VARCHAR(255) Null No
EXPIRY_DT The date that the type code is nolonger valid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
Chapter 1. Tables 99
CHARGECARDThe CHARGECARD table is a subtype of the PAYMENTSOURCE table, describingthe bank account information used to pay one or more contracts or accounts.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
PAYMENT_SOURCE_ID A unique, system-generated key thatidentifies a payment source in thesystem.
BIGINT Not Null Yes
CHARGE_CARD_TP_CD Identifies one type of charge cardfrom another. Some examples areVisa, MasterCard, or AmericanExpress.
BIGINT Not Null No
CHARGE_CARD_NUM The number that uniquely identifies acharge card.
VARCHAR(30) Not Null No
EXPIRY_DT The date that the charge card willexpire.
TIMESTAMP Not Null No
ON_CARD_NAME The account name of the charge cardexactly as it appears on the chargecard.
VARCHAR(100) Null No
BANK_NUM A unique identifier for the bank thatissued the chargecard, assignedoutside of the system.
VARCHAR(10) Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
CLAIMThe CLAIM table contains claim information for coverage types that can beinsured in a contract. For example: "Auto Claim", or "break-in".
This table is used by the following domains.v Account Domainv Party Domain
100 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
CLAIM_ID A unique, system-generated key thatidentifies a claim in the system.
BIGINT Not Null Yes
ADMIN_REF_NUM The reference identification numberfor the claim record.
VARCHAR(150) Null No
CLAIM_NUMBER The Claim Number, a unique,assigned number, distinguishes oneclaim from all other claims.
VARCHAR(20) Null No
CLAIM_DETAIL_AMT The value of the claim detail. DECIMAL(17,3) Null No
CLAIM_PAID_AMT The amount paid on the claim. DECIMAL(17,3) Null No
OUTSTANDING_AMT The amount that is to be paid on theclaim.
DECIMAL(17,3) Null No
BENEFIT_CLAIM_AMT The maximum amount that can bepaid on a claim.
DECIMAL(17,3) Null No
CLAIM_TP_CD Identifies the type of claim that isrecorded. Some examples includeFire, Theft, Automobile, Collision, andso forth.
BIGINT Not Null No
LOB_TP_CD Identifies the unique type code for aspecific line of business. Someexamples are Life, Annuity, Disability,or Auto and Home.
BIGINT Null No
CLAIM_STATUS_TP_CD Identifies the status of a claim. Someexamples include Pending, Closed,and Rejected.
BIGINT Null No
CLAIM_CODE A code that identifies the procedureor claim service. For example,Orthodontics procedure code isD8000.
VARCHAR(20) Null No
STATUS_DT The date that the claim status wasupdated.
TIMESTAMP Null No
CLAIM_INCURRED_DT The date that the claim was incurred. TIMESTAMP Null No
REPORTED_DT The date that the claim was reported. TIMESTAMP Null No
DESCRIPTION Description provides extrainformation about the claim.
VARCHAR(255) Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
DETLAMT_CUR_TP The currency type for the claim detailamount.
BIGINT Null No
Chapter 1. Tables 101
Name Comment Datatype Null Option Is PK
PAIDAMT_CUR_TP The currency type for the total claimbenefit amount.
BIGINT Null No
OUTSAMT_CUR_TP The currency type for the outstandingamount.
BIGINT Null No
BENEAMT_CUR_TP The currency type for the BenefitClaim amount.
BIGINT Null No
CLAIMCONTRACTThe CLAIMCONTRACT table contains a record of claims against a contract. Forexample, Automobile, Homeowners and Whole Life insurance policies.
This table is used by the following domains.v Account Domainv Party Domain
Name Comment Datatype Null Option Is PK
CLAIM_CONTR_ID A unique, system-generated key thatidentifies a claim agreement in thesystem.
BIGINT Not Null Yes
CLAIM_ID A unique, system-generated key thatidentifies a claim in the system.
BIGINT Not Null No
CONTRACT_ID A unique, system-generated key thatidentifies a contract in the system.
BIGINT Not Null No
DESCRIPTION Provides extra space for informationthat can be used for an additionaldefinition or as free form commentsto provide further meaning.
VARCHAR(255) Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
102 InfoSphere MDM 11.0: MDM Physical Data Dictionary
CLAIMROLEThe CLAIMROLE table contains information on the role a party plays on a claimrecord. For example, Party 1 reported the broken windshield, Party 2 is at fault.
This table is used by the following domains.v Account Domainv Party Domain
Name Comment Datatype Null Option Is PK
CLAIM_ROLE_ID A unique, system-generated key thatidentifies a claim detail role in thesystem.
BIGINT Not Null Yes
CLAIM_ROLE_TP_CD Identifies a type of role a party playson a claim. Some examples includeClaimant, Witness and Third Party.
BIGINT Not Null No
CONT_ID A unique, system-generated key thatidentifies a party in the system.
BIGINT Not Null No
CLAIM_ID A unique, system-generated key thatidentifies a claim in the system.
BIGINT Not Null No
DESCRIPTION Provides extra information. VARCHAR(255) Null No
START_DT The date that the claim role recordbecame effective, or was recorded.
TIMESTAMP Not Null No
END_DT The date that the claim role record isno longer effective.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
CONDITIONATTRIBUTEThe CONDITIONATTRIBUTE table records attributes that are added to theTermCondition Entity. The attribues are functionally "executable" and are used bybusiness rules to enforce the condition or to perform a calculation described by thecondition.
This table is used by the following domains.v Account Domainv Product Domain
Chapter 1. Tables 103
Name Comment Datatype Null Option Is PK
CONDITION_ATTRIBUTE_ID
A unique, system-generated key thatidentifies a Condition Attribute in thesystem.
BIGINT Not Null Yes
CONDITION_ATTR_TP_CD
Serves to group condition attributesand allows another level of detail.
BIGINT Not Null No
VALUE The value associated with thisCondition Attribute.
VARCHAR(250) Null No
CONDITION_ID The ID of the term conditionassociated with this conditionattribute
BIGINT Not Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
CONTACTA CONTACT is a legal entity that is tracked in the system, and can be furtherrefined by one of two subtypes: PERSON or ORG. CONTACT can include clients,suspect duplicates, prospects, CSRs, agents, competitors, contact persons, and anyother entity whose name, address, telephone number, and relationship to anothercontact is relevant.
This table is used by the following domains.v Account Domainv Party Domain
Name Comment Datatype Null Option Is PK
CONT_ID A unique, system-generated key thatidentifies a party in the system.
BIGINT Not Null Yes
ACCE_COMP_TP_CD Represents one of the various types ofaccess a party can have to a computerand related technologies.
BIGINT Null No
PREF_LANG_TP_CD Identifies a preferred spokenlanguage. For example, English,French, Spanish, and so forth.
BIGINT Null No
CREATED_DT The date that the party was created. TIMESTAMP Not Null No
104 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
INACTIVATED_DT The date which the party row wasconsidered inactive through businessprocesses such as collapsing andsplitting, resulting in a new partyrecord created, and so forth.
TIMESTAMP Null No
CONTACT_NAME Identifies the full name of the personto be contacted within thecorporation. For trusts, this identifiesthe trustee.
VARCHAR(255) Null No
PERSON_ORG_CODE A pointer to the type of party: personor organization.
CHAR(1) Not Null No
SOLICIT_IND Determines whether this party can besolicited at any location group.
CHAR(1) Null No
CONFIDENTIAL_IND Indicates whether this party'sinformation must be keptconfidential.
CHAR(1) Null No
CLIENT_IMP_TP_CD An identifier that uniquely separatesone client importance type fromanother. Examples include high,medium, or low.
BIGINT Null No
CLIENT_ST_TP_CD An identifier that uniquely separatesone client status type from another.Examples include prospect, active, orsuspended.
BIGINT Null No
CLIENT_POTEN_TP_CD An identifier that uniquely separatesone client potential type from another.Examples include high, medium, orlow.
BIGINT Null No
RPTING_FREQ_TP_CD Describes the frequency that aparticular Party (CONTACT) wouldlike to receive consolidatedstatements. Sample values includeannually, semi-annually, monthly, andothers. No business logic is currentlybeing invoked on this field.
BIGINT Null No
LAST_STATEMENT_DT The last time a consolidated statementwas sent to the Party. No businesslogic is currently being invoked onthis field.
TIMESTAMP Null No
PROVIDED_BY_CONT The ID of the party that referred thisparty to the organization.
BIGINT Null No
ALERT_IND Indicates whether there is any kind ofalert or restriction on this party. Thisfield is set by the system when anactive alert is associated with theParty record.
CHAR(1) Null No
Chapter 1. Tables 105
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
DO_NOT_DELETE_IND Indicates whether the record can orcannot be deleted. A blank value or avalue of '0' means neither operationalor history data can be deleted. Avalue of '1' means both operationaland history data can be deleted. Avalue of '2' means only history datacan be deleted. A value of '3' meansonly operational data can be deleted.
CHAR(1) Null No
LAST_USED_DT The date that this data was last used.There is no business logic associatedwith this field.
TIMESTAMP Null No
LAST_VERIFIED_DT The date that this data was lastverified. There is no business logicassociated with this field.
TIMESTAMP Null No
SOURCE_IDENT_TP_CD The type for the source identifier. BIGINT Null No
SINCE_DT Identifies the date that the contactbecame a customer.
TIMESTAMP Null No
LEFT_DT Identifies the date that the contactstopped being a customer.
TIMESTAMP Null No
ACCESS_TOKEN_VALUE
An access token is a means to protecta resource from unauthorized user orgroup access. When an access tokenvalue is associated with a resourcesuch as a database record, only usersor groups that are assigned that tokencan have access to that resource.
VARCHAR(50) Null No
PENDING_CDC_IND Indicates the presence of a pendingcritical data change for a party.
CHAR(1) Null No
ENTITYLINK_ST_TP_CD BIGINT Null No
ENTITY_ID The entity ID from virtual MDMwhen a party is persisted to thephysical MDM.
BIGINT Null No
ENTITY_TYPE The associated entity type of theentity ID from virtual MDM.
VARCHAR(25) Null No
106 InfoSphere MDM 11.0: MDM Physical Data Dictionary
CONTACTCDCThe CONTACTCDC table records information about critical data changes on aCONTACT.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
CDC_ID A unique, system-generated key thatidentifies a critical data change in thesystem.
BIGINT Not Null Yes
CONT_ID A unique, system-generated key thatidentifies a party in the system.
BIGINT Not Null No
ENTITY_NAME The class name of the entity holdingthe critical data that was requestedfor update.
VARCHAR(120) Not Null No
INSTANCE_PK The primary key of the entity holdingcritical data that was requested forupdate.
BIGINT Null No
CRITDATA An XML representation of the entitythat was requested for update.
CLOB(200K) Not Null No
CDC_ST_TP_CD The status of the critical data changerequest.
BIGINT Not Null No
REJ_REASON_TP_CD The reason for which a critical datachange is rejected.
BIGINT Null No
CREATED_DT The date when the pending criticaldata change is created.
TIMESTAMP Not Null No
EXPIRY_DT The date when the pending criticaldata change was resolved (eitheraccepted or rejected).
TIMESTAMP Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
Chapter 1. Tables 107
CONTACTDEMOGRAPHICSThe CONTACTDEMOGRAPHICS table contains various demographic data for acontact.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
DEMOGRAPHICS_ID A unique, system-generated key thatidentifies a party demographicsrecord in the system.
BIGINT Not Null Yes
CONT_ID The ID of the party to whom thedemographics record belongs.
BIGINT Not Null No
DEMOGRAPHICS_TP_CD
Type of the demographics informationdefined in code tableCDDEMOGRAPHICSTP.
BIGINT Not Null No
SPEC_FMT_ID The ID of the spec format. BIGINT Not Null No
VALUE The demographics XML. XML Not Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
CONTACTMETHODThe CONTACTMETHOD table stores the ways that a CONTACT can be reached.For example, this can include e-mail address, phone number, fax number, websites, or others.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
CONTACT_METHOD_ID
A unique, system-generated key thatidentifies a contact method in thesystem.
BIGINT Not Null Yes
108 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
ADDRESS_ID A unique, system-generated key thatidentifies an address in the system.There is no implementation for thisattribute in the object model. Youhave the option to create your ownimplementation.
BIGINT Null No
CONT_METH_CAT_CD Identifies the main category of contactmethod. For example: telephone,e-mail, PDA, and so forth.
BIGINT Not Null No
REF_NUM The actual text provided for thecontact method. For example, if thecontact method category type istelephone, then this column containsthe actual 10 digits for the phonenumber.
VARCHAR(255) Not Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
CONT_METH_STD_IND Indicates if this contact method hasbeen standardized.
CHAR(1) Null No
CONTACTMETHODGROUPThe CONTACTMETHODGROUP table, a subtype of the LOCATIONGROUP table,links contacts with addresses and specifies rules for reaching those contacts.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LOCATION_GROUP_ID A unique, system-generated key thatidentifies a location group in thesystem.
BIGINT Not Null Yes
CONTACT_METHOD_ID
A unique, system-generated key thatidentifies a contact method in thesystem.
BIGINT Not Null No
Chapter 1. Tables 109
Name Comment Datatype Null Option Is PK
CONT_METH_TP_CD Identifies the subtypes of a ContactMethod Category Type Code. Forexample, if the category type istelephone, then the values of thesubtype code are home, business, cellphone, and so forth.
BIGINT Not Null No
METHOD_ST_TP_CD Identifies the status of a contactmethod. For example: disconnected orcancelled.
BIGINT Null No
ATTACH_ALLOW_IND Indicates whether attachments areallowed to be sent with this contactmethod. This indicator should only beused when the contact method refersto an e-mail.
CHAR(1) Null No
TEXT_ONLY_IND Indicates whether this can be sent astext only. This indicator should onlybe used when the contact methodrefers to an e-mail.
CHAR(1) Null No
MESSAGE_SIZE Represents the maximum size ofelectronic message that can be sent tothis contact method. This indicatorshould only be used when the contactmethod refers to an e-mail.
VARCHAR(20) Null No
COMMENT_DESC A comment or description. VARCHAR(100) Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
CONTACTRELThe CONTACTREL records the relationship between two parties. For example:FROM CONTACT: Sue Smith; RELATIONSHIP: child of; TO CONTACT: GregSmith.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
CONT_REL_ID A unique, system-generated key thatidentifies a party relationship in thesystem.
BIGINT Not Null Yes
110 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
REL_TP_CD Identifies the type of relationship thattwo parties can have between oneanother. For example, "is parent of,""is employer of," and so forth.
BIGINT Not Null No
REL_DESC Refers to comments that a user mighthave concerning the partyrelationship.
VARCHAR(255) Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
TO_CONT_ID A unique, system-generated key thatidentifies a party in the system.
BIGINT Not Null No
FROM_CONT_ID A unique, system-generated key thatidentifies a party in the system.
BIGINT Not Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
REL_ASSIGN_TP_CD Identifies how the relationshipbetween the parties has beenassigned. For example, a custodialrelationship between a minor and anadult can be created by a court order.
BIGINT Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
END_REASON_TP_CD Identifies the cause for a party toparty relationship being ended. Forexample, "divorce" can be used as anend reason.
BIGINT Null No
CONTEQUIVThe CONTEQUIV table provides the link between the system Party ID and theexternal administrative system Party ID.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
CONT_EQUIV_ID A unique, system-generated key thatidentifies a party equivalency in thesystem.
BIGINT Not Null Yes
Chapter 1. Tables 111
Name Comment Datatype Null Option Is PK
CONT_ID A unique, system-generated key thatidentifies a party in the system.
BIGINT Not Null No
ADMIN_SYS_TP_CD Uniquely identifies the administrativesource system for a contract.Examples include Ingenium, Alltel,Huon, and so forth.
BIGINT Not Null No
ADMIN_CLIENT_ID Uniquely identifies the primary keyfor the administrative source system.
VARCHAR(20) Null No
DESCRIPTION Provides extra space for informationthat can be used for an additionaldefinition or as free form commentsto provide further meaning.
VARCHAR(255) Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
CONTMACROROLEThe CONTMACROROLE table represents a high-level role a contact plays in thesystem. For instance, the contact can be captured in the context of a prospect and,as such, its macro role is recorded as "prospect".
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
CONT_MACRO_ROLE_ID
A unique, system-generated key thatidentifies a party macro role in thesystem.
BIGINT Not Null Yes
CONT_ID A unique, system-generated key thatidentifies a party in the system.
BIGINT Not Null No
ROLE_TP_CD This is the role type, whichcorresponds to a particular rolecategory. Some examples include"head of household", "OnlineCustomer", "Prospect", and so forth.
BIGINT Not Null No
START_DT The date when this role becomesactive
TIMESTAMP Not Null No
END_DT The date when this role becomesinactive
TIMESTAMP Null No
112 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
DESCRIPTION A free form description for this role. VARCHAR(255) Null No
END_REASON_TP_CD Identifies the cause for why arelationship was ended. For example,a spousal party to party relationshipcan be ended for a "divorce," reason.
BIGINT Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
CONTRACTThe CONTRACT table contains information representing the purchase of aPRODUCT. For example, this purchase can include various scenarios including adisability insurance plan, a savings account, a GIC, and so forth.
This table is used by the following domains.v Account Domainv Party Domain
Name Comment Datatype Null Option Is PK
CONTRACT_ID A unique, system-generated key thatidentifies a contract in the system.
BIGINT Not Null Yes
CONTR_LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.When used as part of the primary keyof a code value lookup table, theLanguage Type Code also representsthe language of the code name.
BIGINT Null No
CURRENCY_TP_CD Identifies the currency of the amountcolumns.
BIGINT Null No
FREQ_MODE_TP_CD Identifies the frequency of thepayments made on the contract. Forexample, monthly or annual.
BIGINT Null No
BILL_TP_CD An identifier that uniquely separatesone billing type from another. Forexamples, Regular, Direct, or Payrolldeduction.
BIGINT Null No
Chapter 1. Tables 113
Name Comment Datatype Null Option Is PK
REPL_BY_CONTRACT A unique, system-generated key thatidentifies a contract in the system,that is replacing this particularcontract.
BIGINT Null No
PREMIUM_AMT The premium payment due at theintervals identified by the frequencymode type code.
DECIMAL(17,3) Null No
NEXT_BILL_DT The date of the next bill for thecontract.
TIMESTAMP Null No
CURR_CASH_VAL_AMT The cash value of the contract. DECIMAL(17,3) Null No
LINE_OF_BUSINESS Represents a high-level productgrouping (Life, Annuity, Disability, orAuto and Home.)
VARCHAR(30) Null No
BRAND_NAME The title of the subsidiary that soldthis contract.
VARCHAR(30) Null No
SERVICE_ORG_NAME The organization that services thecontract.
VARCHAR(70) Null No
BUS_ORGUNIT_ID The lowest level of identificationwithin the servicing organization ofthis contract.
VARCHAR(30) Null No
SERVICE_PROV_ID The unique identifier that identifiesthe servicing agent or broker for thiscontract.
VARCHAR(30) Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
ISSUE_LOCATION Describes the location where thecontract was issued.
VARCHAR(30) Null No
ADMIN_CONTRACT_ID The actual text or number that is usedin the administrative source system toidentify a contract.
VARCHAR(150) Null No
ADMIN_SYS_TP_CD Uniquely identifies the administrativesource system for a contract.Examples include Ingenium, Alltel,Huon, and so forth.
BIGINT Null No
PREMAMT_CUR_TP The currency type for the premiumamount.
BIGINT Null No
CASHVAL_CUR_TP The currency type for the current cashvalue amount.
BIGINT Null No
114 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
ACCESS_TOKEN_VALUE
An access token is a means to protecta resource from unauthorized user orgroup access. When an access tokenvalue is associated with a resourcesuch as a database record, only usersor groups that are assigned that tokencan have access to that resource.
VARCHAR(50) Null No
MANAGED_ACCOUNT_IND
Indicates whether or not this contractis a managed account. A managedaccount is a contract that is managedby this system. The opposite of amanaged account is a referenceaccount. A reference account is acontract that is managed by anexternal system.
CHAR(1) Null No
AGREEMENT_NAME The name of the contract oragreement.
VARCHAR(120) Null No
AGREEMENT_NICKNAME
The alternate name of the contract. VARCHAR(120) Null No
SIGNED_DT The date on which the contract issigned.
TIMESTAMP Null No
EXECUTED_DT The date on which the contractbecomes active.
TIMESTAMP Null No
END_DT The date on which the contract isconsidered ended.
TIMESTAMP Null No
REPLACES_CONTRACT The identifier of the contract that thiscontract replaces (if applicable).
BIGINT Null No
ACCOUNT_LAST_TRANSACTION_DT
The date on which a transaction waslast executed against this contract.
TIMESTAMP Null No
TERMINATION_DT The date on which the contract isterminated.
TIMESTAMP Null No
TERMINATION_REASON_TP_CD
The reason for which the contract isterminated.
BIGINT Null No
AGREEMENT_DESCRIPTION
The description of the contract. VARCHAR(250) Null No
AGREEMENT_ST_TP_CD
The status of the contract. BIGINT Null No
AGREEMENT_TP_CD
The type of the contract. BIGINT Null No
SERVICE_LEVEL_TP_CD The service level provided for thiscontract. For example: "24/7 CallCenter service" or "Service duringbusiness hours only".
BIGINT Null No
LAST_VERIFIED_DT The date on which the contract waslast verified.
TIMESTAMP Null No
LAST_REVIEWED_DT The date on which the contract waslast reviewed.
TIMESTAMP Null No
PRODUCT_ID The Product identifier on which thecontract is based.
BIGINT Null No
Chapter 1. Tables 115
Name Comment Datatype Null Option Is PK
CLUSTER_KEY This column can optionally be usedas a clustering index. A clusteringindex is an index that determineshow rows are physically ordered(clustered) in a table space. If notspecified, the default value for thiscolumn is NOT NULL.
BIGINT Null No
CONTRACTCOMPONENTThe CONTRACTCOMPONENT table contains information on contractcomponents, such as base, riders, or others. A contract component represents a partof a contract. Every contract must have at least one base component.
This table is used by the following domains.v Account Domainv Party Domain
Name Comment Datatype Null Option Is PK
CONTR_COMPONENT_ID
A unique, system-generated key thatidentifies a contract component in thesystem.
BIGINT Not Null Yes
CONTRACT_ST_TP_CD Identifies the status of the contract.For example, "active", "pending","lapse pending", or "cancelled". Thesevalues are provided by theadministrative source systems of thecontract.
BIGINT Not Null No
PROD_TP_CD Identifies the type of productassociated with the contract (or atsome level within the product family).Examples include Universal Life,Savings, Checking, Term Life, Auto,and so forth.
BIGINT Null No
CONTRACT_ID A unique, system-generated key thatidentifies a contract in the system.
BIGINT Not Null No
CURR_CASH_VAL_AMT
The cash value of the contractcomponent.
DECIMAL(17,3) Null No
PREMIUM_AMT The premium payment due at theintervals identified by the frequencymode type code for this contractcomponent.
DECIMAL(17,3) Null No
ISSUE_DT The date when the contractcomponent was issued.
TIMESTAMP Null No
116 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
VIATICAL_IND Determines whether this contract isunder a viatical arrangement. Aviatical settlement is a transaction thatoccurs when a person with a terminalor chronic illness sells a life insurancepolicy in return for a discountedamount of the death benefit. Theviator, the individual who sells thepolicy, sells his or her interest in apolicy to a viatical settlementcompany. The beneficial interest inthe policy is then purchased by thirdparty investors. A viaticated policy isa life insurance policy that has beensold.
CHAR(1) Null No
BASE_IND Used to identify the base componentof the contract. Every contract has atleast one component, the basecomponent.
CHAR(1) Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
CONTR_COMP_TP_CD A numeric representation of the typeof coverage for the product. Forexample: Base, Rider, Base Increase,Integrated.
BIGINT Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
SERV_ARRANGE_TP_CD
Indicates whether this contract isadministered by the organization or athird party.
BIGINT Null No
HOLDING_ID The primary key of a party holdingrecord.
BIGINT Null No
EXPIRY_DT The date when this record becomesinactive.
TIMESTAMP Null No
PREMAMT_CUR_TP The currency type for the premiumamount.
BIGINT Null No
CASHVAL_CUR_TP The currency type for the current cashvalue amount.
BIGINT Null No
Chapter 1. Tables 117
Name Comment Datatype Null Option Is PK
CLUSTER_KEY This column can optionally be usedas a clustering index. A clusteringindex is an index that determineshow rows are physically ordered(clustered) in a table space. If notspecified, the default value for thiscolumn is null.
BIGINT Null No
CONTRACTCOMPVALThe CONTRACTCOMPVAL table allows you to model numeric values on theContract Component, presenting you with a mechanism to extend informationassociated with a contract component that is only available through back-endsystems. Certain contract features such as Balances in accounts, limits, terms andrates are typically what can be modeled using the Value entity. A contractcomponent value has the following characteristics: (i) Allows extending theinformation that is held within an contract component or contract component row;(ii) Any number of values can be associated with an contract component; (iii)Allow values are defined through Code Tables; (iv) Has a description; (v) Has aspecific type; (vi) Has a specific value; (vii) Has a status; (viii) Has a validityperiod or is indefinite.
This table is used by the following domains.v Account Domainv Party Domain
Name Comment Datatype Null Option Is PK
CONTR_COMP_VAL_ID
A unique, system-generated key thatidentifies a contract component valuein the system.
BIGINT Not Null Yes
DOMAIN_VALUE_TP_CD
Domain Value Type Code, in a givendomain, identifies the specific valuesthat are captured. For example,Integer value, Date value, etc.
BIGINT Not Null No
VALUE_STRING The numeric value associated withthe Value Type Code.
VARCHAR(50) Not Null No
CONTR_COMPONENT_ID
A unique, system-generated key thatidentifies a contract component in thesystem.
BIGINT Not Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
118 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
CONTRACTRELThe CONTRACTREL table represents the relationship that an agreement can havewith another agreement.
This table is used by the following domains.v Account Domainv Party Domain
Name Comment Datatype Null Option Is PK
CONTRACT_REL_ID A unique, system-generated key thatidentifies a contract relationship inthe system.
BIGINT Not Null Yes
TO_CONTRACT_ID A unique, system-generated key thatidentifies a contract in the system.
BIGINT Not Null No
FROM_CONTRACT_ID A unique, system-generated key thatidentifies a contract in the system.
BIGINT Not Null No
CONTR_REL_TP_CD Describes the type of relationship.Examples include master contract andcontract term.
BIGINT Not Null No
CONTR_REL_ST_TP_CD Identifies the status of therelationship between two contracts,such as "pending", "active", and"terminated".
BIGINT Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
REL_DESCRIPTION Provides for comments that a usermight have concerning the contractrelationship.
VARCHAR(255) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
Chapter 1. Tables 119
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
CONTRACTROLEThe CONTRACTROLE table represents an association that links contacts to thevarious roles they can have on a contract.
This table is used by the following domains.v Account Domainv Party Domain
Name Comment Datatype Null Option Is PK
CONTRACT_ROLE_ID A unique, system-generated key thatidentifies a party contract role in thesystem.
BIGINT Not Null Yes
CONT_ID A unique, system-generated key thatidentifies a party in the system.
BIGINT Not Null No
CONTR_COMPONENT_ID
A unique, system-generated key thatidentifies a contract component in thesystem.
BIGINT Not Null No
CONTR_ROLE_TP_CD Identifies the type of role that a partycan have on a contract. For example"beneficiary", "owner", "insured", or"payer".
BIGINT Not Null No
REGISTERED_NAME The party contract role name as itappears on the contract.
VARCHAR(255) Null No
DISTRIB_PCT Used for beneficiary type, it indicatesthe share that this party has interestin regarding this contract component.
DECIMAL(5,2) Null No
IRREVOC_IND Indicates whether this role can bechanged without consent.
CHAR(1) Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
RECORDED_START_DT The date when the party'srelationship to the contract becamelegally effective. This is commonly thedate which the party signed thecontract.
TIMESTAMP Null No
RECORDED_END_DT The date that the party's relationshipto the contract is no longer effective.
TIMESTAMP Null No
120 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
SHARE_DIST_TP_CD The values and descriptions defininghow the proceeds of the contract aredistributed among the party contractroles.
BIGINT Null No
ARRANGEMENT_TP_CD
The type of agreement that the partycontract role has with the contract.For example: time delay arrangementsuch as a common disaster.
BIGINT Null No
ARRANGEMENT_DESC Provides extra information that can beused either as an additional definitionof the arrangement or as free formcomments used by the user toprovide further meaning to thearrangement.
VARCHAR(255) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
END_REASON_TP_CD Identifies the cause for why a rolewas ended. For example, a beneficiaryrelationship can be ended for a deathreason.
BIGINT Null No
CONTRACTROLERELThe CONTRACTROLEREL table represents an association that links a contact'scontract roles together. For example, a role relationship is used to determine thecustodian role for a minor on a given contract.
This table is used by the following domains.v Account Domainv Party Domain
Name Comment Datatype Null Option Is PK
CONTR_ROLE_REL_ID A unique, system-generated key thatidentifies a party contract rolerelationship in the system.
BIGINT Not Null Yes
REL_TP_CD Identifies the type of relationship thattwo parties can have between oneanother, within the context of thecontract. For example: "is custodianof", "is minor for", and so forth.
BIGINT Not Null No
Chapter 1. Tables 121
Name Comment Datatype Null Option Is PK
ROLE_REL_DESC Provides a space to store usercomments of the party rolesrelationship.
VARCHAR(255) Null No
CONTR_ROLE_FROM_ID
A unique, system-generated key thatidentifies a party contract role in thesystem.
BIGINT Not Null No
CONTR_ROLE_TO_ID A unique, system-generated key thatidentifies a party contract role in thesystem.
BIGINT Not Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
END_REASON_TP_CD Identifies the cause for why a rolerelationship was ended. For example,a custodial relationship can be endedfor a "coming of age" reason.
BIGINT Null No
CONTSUMMARYThe CONTSUMMARY table contains a summary view of a contact record andcontains indicators that track what information is stored about a particular party.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
CONT_ID A unique, system-generated key thatidentifies a party in the system.
BIGINT Not Null Yes
PRIVPREF_IND Determines whether there is anyparty privacy preference on this party.This field is set by the system when aparty privacy preference is associatedwith the Party record.
SMALLINT Not Null No
122 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
MISCVALUE_IND Determines whether there is anyparty miscellaneous value on thisparty. This field is set by the systemwhen a party miscellaneous value isassociated with the Party record.
SMALLINT Not Null No
CONTACTREL_IND Determines whether there is anyparty relationship on this party. Thisfield is set by the system when aparty relationship is associated withthe Party record.
SMALLINT Not Null No
BANKACCOUNT_IND Determines whether there is anyparty bank account on this party. Thisfield is set by the system when aparty financial profile is associatedwith the Party record.
SMALLINT Not Null No
CHARGECARD_IND Determines whether there is anyparty charge card on this party. Thisfield is set by the system when aparty financial profile is associatedwith the Party record.
SMALLINT Not Null No
PAYROLLDEDUCT_IND Determines whether there is anyparty payroll deduction on this party.This field is set by the system when aparty financial profile is associatedwith the Party record.
SMALLINT Not Null No
INCOMESOURCE_IND Determines whether there is anyparty income source on this party.This field is set by the system when aparty financial profile is associatedwith the Party record.
SMALLINT Not Null No
IDENTIFIER_IND Determines whether there is anyparty identifier on this party. Thisfield is set by the system when aparty identifier is associated with theParty record.
SMALLINT Not Null No
ALERT_IND Indicates whether there is any kind ofalert or restriction on this party. Thisfield is set by the system when anactive alert is associated with theParty record.
SMALLINT Not Null No
CONTEQUIV_IND Indicates whether there is any contactequivalent on this party. This field isset by the system when a contactequivalent is associated with theParty record.
SMALLINT Not Null No
INTERACTION_IND Indicates whether there is anyinteraction on this party. This field isset by the system when an interactionis associated with the Party record.
SMALLINT Not Null No
ADDRESSGROUP_IND Indicates whether there is any partyaddress group on this party. This fieldis set by the system when a partyaddress group is associated with theParty record.
SMALLINT Not Null No
Chapter 1. Tables 123
Name Comment Datatype Null Option Is PK
CONTMETHGROUP_IND
Indicates whether there is any partycontact method group on this party.This field is set by the system when aparty contact method group isassociated with the Party record.
SMALLINT Not Null No
LOBREL_IND Indicates whether there is any partyline of business relationship on thisparty. This field is set by the systemwhen a party line of businessrelationship is associated with theParty record.
SMALLINT Not Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
DEFAULTSOURCEVALThe DEFAULTSOURCEVAL table identifies a business data element that wasdefaulted during data collection or migration. For example, a date may beincomplete in the source system and as a result must be defaulted in order toprovide the system an accurate and complete date.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
DEFAULT_SRC_VAL_ID A unique, system-generated key thatidentifies an default object in thesystem.
BIGINT Not Null Yes
ENTITY_NAME The name of the business entity thathas the defaulted values.
VARCHAR(20) Not Null No
INSTANCE_PK The actual primary key of the row inthe logical entity that has thedefaulted values.
BIGINT Null No
COLUMN_NAME The actual name of the column wherethe default occurred.
VARCHAR(20) Not Null No
SOURCE_VALUE The value of the Logical ColumnName prior to defaulted to thesystem database column value. Forexample: established date - Jan 31,2002; Source Value is: Jan 2002.
VARCHAR(100) Null No
124 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
DEFAULT_VALUE The value of the Logical ColumnName after it is defaulted to thesystem database column value. Forexample: established date - Jan 2002.Default Value is: Jan 31, 2002.
VARCHAR(100) Null No
DESCRIPTION Provides extra space for informationthat can be used for an additionaldefinition or as free form commentsto provide further meaning.
VARCHAR(1000) Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
SOURCE_IDENT_TP_CD Identifies the type for the sourceidentifier.
BIGINT Null No
SOURCE_IDENTIFIER Identifies the source of the value. VARCHAR(100) Null No
EME_RECBKTDeme_recbktd stores the derived data information for a record that is used forfirst-pass determination of records for comparison. All records having the samebucket hash (bkthash) belong in the same bucket, and compare to each other. Arecord can belong
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
RECNO Unique record number fromeme_rechead.
BIGINT Not Null Yes
SRCRECNO Source record, from the EmbeddedMatching Engine configuration.
SMALLINT Not Null Yes
BKTHASH Hash value of the derived data. BIGINT Not Null Yes
Chapter 1. Tables 125
EME_RECCHKD
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
RECNO BIGINT Not Null Yes
SRCRECNO SMALLINT Not Null No
CHKSUM BIGINT Not Null No
EME_RECCMPDThis derived data table stores the comparison data information for a record that isused for scoring records that met the bucketing pass. The purpose of storinginformation in eme_reccmpd, rather than spreading the information among thevarious record data tables, is to provide a performance enhancement.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
RECNO Unique record number fromeme_rechead.
BIGINT Not Null Yes
SRCRECNO Source record, from the EmbeddedMatching Engine configuration.
SMALLINT Not Null No
CMPSEQNO Comparison sequence number. SMALLINT Not Null Yes
CMPVAL The comparison data. The comparisondata itself is a derived copy of thesource record from which it wasobtains, altered to provide high-speedcomparisons.
VARCHAR(1020) Not Null No
EME_RECHEADThe eme_rechead table is used to store one row for each record presented to theEmbedded Matching Engine.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
RECNO Automatically assigned internalidentification number.
BIGINT Not Null No
SRCRECNO Source system identification in theEmbedded Matching Engineconfiguration.
SMALLINT Not Null Yes
SRCID Source system primary identifier forthe record.
VARCHAR(240) Not Null Yes
126 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
TXNID User specified transaction identifier,not managed by the EmbeddedMatching Engine.
BIGINT Not Null No
ENTITYCONDITIONRELThe ENTITYCONDITIONREL table stores the association between theTermCondition the entity (PRODUCT or CONTRACT) to which it applies.
This table is used by the following domains.v Account Domainv Product Domain
Name Comment Datatype Null Option Is PK
ENTITY_CONDITION_REL_ID
A unique, system-generated key thatidentifies a Entity ConditionRelationship in the system.
BIGINT Not Null Yes
INSTANCE_PK The Primary key of the entity towhich the term and condition isrelated. It can be the primary key ofeither PRODUCT or CONTRACT.
BIGINT Not Null No
ENTITY_NAME The type of entity that the term andcondition is related to. It can be eitherPRODUCT or CONTRACT.
VARCHAR(120) Not Null No
CONDITION_ID The identifier of the term andcondition attached to the entity.
BIGINT Not Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
Chapter 1. Tables 127
ENTITYCONTENTREFERENCEThe ENTITYCONTENTREFERENCE table stores the content references of thecontent assets stored in external CMS.
This table is used by the following domains.v Account Domainv Product Domain
Name Comment Datatype Null Option Is PK
CONTENT_REF_ID A unique, system-generated key thatidentifies a Content Reference in thesystem.
BIGINT Not Null Yes
CONTENT_REF_1 Parameter defined in the CMS systemto identify the Content Reference.
VARCHAR(250) Null No
CONTENT_REF_2 Parameter defined in the CMS systemto identify the Content Reference.
VARCHAR(250) Null No
CONTENT_REF_3 Parameter defined in the CMS systemto identify the Content Reference.
VARCHAR(250) Null No
CONTENT_REF_4 Parameter defined in the CMS systemto identify the Content Reference.
VARCHAR(250) Null No
INSTANCE_PK The actual primary key of the row inthe logical entity that is associatedwith the content reference.
BIGINT Null No
ENTITY_NAME The name of the business entity. VARCHAR(250) Null No
CONTENT_VERSION The version of the content referencein the CMS system.
VARCHAR(250) Null No
START_DATE The date when this record becomesactive.
TIMESTAMP Not Null No
END_DATE The date when this record becomesinactive.
TIMESTAMP Null No
REPOSITORY_TP_CD Identifies the Repository within theCMS System.
BIGINT Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
DOCUMENT_NAME The name of the document in theCMS system.
VARCHAR(250) Null No
AUTHOR The document author name in theCMS system.
VARCHAR(250) Null No
128 InfoSphere MDM 11.0: MDM Physical Data Dictionary
ENTITYROLEThe ENTITYROLE table stores information about the role or roles that a particularentity can play on a particular collection. For example, grouping, hierarchy, orparty-to-party relationships.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
ENTITY_ROLE_ID A unique, system-generated key thatidentifies an entity role in the system.
BIGINT Not Null Yes
ROLE_TP_CD This is the role type, whichcorresponds to a particular rolecategory. Some examples include"head of household", "OnlineCustomer", "Prospect", and so forth.
BIGINT Not Null No
CONTXT_ENTITY_NAME
The name of the entity that a role isbeing provided for.
VARCHAR(30) Not Null No
CONTXT_INSTANCE_PK
The primary key of the entity. BIGINT Not Null No
ROLE_ENTITY_NAME The entity name of the role player. VARCHAR(30) Null No
ROLE_INSTANCE_PK The primary key of the role player. BIGINT Null No
START_DT The date when this role becomesactive.
TIMESTAMP Not Null No
END_DT The date when this role becomesinactive.
TIMESTAMP Null No
DESCRIPTION A freeform description for this role. VARCHAR(255) Null No
END_REASON_TP_CD The reason why a relationship ended.For example, a spousal party-to-partyrelationship can be ended by a"divorce" reason.
BIGINT Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
Chapter 1. Tables 129
ENTITYSPECUSEThe ENTITYSPECUSE table defines the way a spec will be used to define an entitysuch as a product.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
SPEC_USE_ID A unique, system-generated key thatidentifies the usage of a spec by anentity in the system.
BIGINT Not Null Yes
ENTITY_NAME The type of entity this spec use isrelated to.
VARCHAR(250) Not Null No
INSTANCE_PK The primary key of the related entity. BIGINT Not Null No
SPEC_ID A unique, system-generated key thatidentifies a spec in the system.
BIGINT Not Null No
SPEC_USE_TP_CD The code assigned to the spec usetype.
BIGINT Not Null No
SPEC_CASCADE_TP_CD
The code assigned to the cascadeaction type for a spec. For example, ifthis spec is cascaded to descendentsin the entity's hierarchy.
BIGINT Not Null No
EXPLICIT_DEF_IND Indicates that the spec has beendefined for the first time on thisentity.
CHAR(1) Not Null No
METADATA_INFO_TP_CD
The code assigned to the metadatainfo type.
BIGINT Not Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
DESTINATION_ENTITY_NAME
The destination entity this spec use isrelated to.
VARCHAR(250) Null No
SEARCHABLE_IND This is an indicator ("Y" or "N") whichindicates whether the associated specis to be searchable in the context ofthe destination entity.
CHAR(1) Null No
130 InfoSphere MDM 11.0: MDM Physical Data Dictionary
FINANCIALPRODUCTThe FINANCIALPRODUCT table contains information about products that are ahardened subtype of PRODUCT.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
PRODUCT_ID A unique, system-generated key thatidentifies a product in the system.
BIGINT Not Null Yes
TAX_POSITION_TP_CD The relative tax position offered bythe product. Determines whether theproduct is tax neutral, provides thecustomer a tax advantage, or providesthe FI with a tax advantage.
BIGINT Null No
ACCOUNT_REQUIRED_TP_CD
Indicates whether the productrequires an account or not.
BIGINT Null No
CURRENCY_TP_CD Identifies the currency the product istraded in.
BIGINT Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
GOODSPRODUCTThe GOODSPRODUCT table contains information on a product that is a hardenedsubtype of product.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
PRODUCT_ID A unique, system-generated key thatidentifies a product in the system.
BIGINT Not Null Yes
Chapter 1. Tables 131
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
HOLDINGThe HOLDING table contains records of personal holdings. For example, a list ofassets and liabilities such as Vehicles, Dwellings and Mortgage.
This table is used by the following domains.v Account Domainv Party Domain
Name Comment Datatype Null Option Is PK
HOLDING_ID A unique, system-generated key thatidentifies a party holding in thesystem.
BIGINT Not Null Yes
HOLD_TP_CD Identifies a type of party holding.Some examples include Vehicles,Property, or Stocks.
BIGINT Not Null No
HOLDING_CODE Identifies the holding code: V -vehicle; P - property.
CHAR(1) Not Null No
HOLDING_VALUE_AMT
The value of the specific holding. DECIMAL(17,3) Null No
DESCRIPTION Provides extra information. VARCHAR(255) Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
132 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
VALUAMT_CUR_TP The currency type for the holdingvalue amount.
BIGINT Null No
IDENTIFIERThe IDENTIFIER table provides an additional way of distinguishing a contact thatis natural to them. For example: social security number, driver's license number, orpassport number.
This table is used by the following domains.v Account Domainv Party Domain
Name Comment Datatype Null Option Is PK
IDENTIFIER_ID A unique, system-generated key thatidentifies a party identification in thesystem.
BIGINT Not Null Yes
ID_STATUS_TP_CD Identifies the status of the identifierprovided by the party. For example:"applied for," "expired," "certified,"and so forth.
BIGINT Null No
CONT_ID A unique, system-generated key thatidentifies a party in the system.
BIGINT Not Null No
ID_TP_CD Identifies the type of identifierprovided by the party. For example:"social security number," "passport,""driver's license number," and soforth.
BIGINT Not Null No
REF_NUM The actual identifier text provided bya party. For example, if theIdentification Type Code indicates asocial security number was provided,then this column contains the actual 9characters.
VARCHAR(50) Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
EXPIRY_DT The date on which the particularidentification expires, such as aPassport expiry date.
TIMESTAMP Null No
Chapter 1. Tables 133
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
ASSIGNED_BY Used to associate a particular contractrole to a particular identifier. Forexample: an employee number can beused as an identifier on a groupcontract.
BIGINT Null No
IDENTIFIER_DESC Provides extra space for informationthat can be used for an additionaldefinition or as free form commentsto provide further meaning.
VARCHAR(255) Null No
ISSUE_LOCATION The issue location of the identificationitem.
VARCHAR(30) Null No
LAST_USED_DT The date that this data was last used.There is no business logic associatedwith this field.
TIMESTAMP Null No
LAST_VERIFIED_DT The date that this data was lastverified. There is no business logicassociated with this field.
TIMESTAMP Null No
SOURCE_IDENT_TP_CD
Identifies the type for the sourceidentifier.
BIGINT Null No
INACTIVATEDCONTThe INACTIVATEDCONT table records when a CONTACT is no longer consideredactive in a company. When an entity becomes inactive, modifications to theINACTIVATEDCONT records are ended.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
CONT_ID A unique, system-generated key thatidentifies a party in the system.
BIGINT Not Null Yes
INACT_BY_USER The ID of the user who inactivatedthe associated party.
VARCHAR(20) Null No
INACT_REASON_TP_CD
Contains the valid values forinactivating a party record, such as'collapsed', 'split' and 'deceased'.
BIGINT Not Null No
134 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
COMMENTS A free form text field used forentering additional informationconcerning the inactivated party.
VARCHAR(255) Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
INACTIVECONTLINKThe INACTIVECONTLINK table maintains the linkage from the CONTACT(target) to an INACTIVATEDCONT (source) entity, tracking a collapsed or splitCONTACT that is now an INACTIVATEDCONT, as well as tracking the link that ithas with the newly created CONTACT (as a result of a collapse or split).
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
INACT_CONT_LINK_ID A unique, system-generated key thatidentifies an inactivated party link inthe system.
BIGINT Not Null Yes
TARGET_CONT_ID A unique, system-generated key thatidentifies a party in the system.
BIGINT Not Null No
SOURCE_CONT_ID A unique, system-generated key thatidentifies a party in the system.
BIGINT Not Null No
LINK_REASON_TP_CD Describes the reason why two partiesare linked. For example, "Sourcecollapsed into target", "Sourceduplicated as target", etc.
BIGINT Not Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
Chapter 1. Tables 135
Name Comment Datatype Null Option Is PK
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
INACTIVEPRODLINKThis table maintains the linkage between active and inactive entities. Its function isto track entities that have been collapsed or split and are now inactive.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
INACT_ENTITY_LINK_ID
A unique, system-generated key thatidentifies an inactivated entity linkrow in the system.
BIGINT Not Null Yes
TARGET_ENTITY_ID A unique, system generated key thatidentifies an entity in the system.
BIGINT Not Null No
SOURCE_ENTITY_ID A unique, system generated key thatidentifies an entity in the system.
BIGINT Not Null No
LINK_REASON_TP_CD Describes the reason why two partiesare linked. For example, "Sourcecollapsed into target", "Sourceduplicated as target", and so forth.
BIGINT Not Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
INCOMESOURCEThe INCOMESOURCE table contains information, provided and attested-to by theparty, detailing the CONTACT's investment experience and financial standing. Thisinformation is used to determine a CONTACT's suitability in purchasing a newinvestment.
This table is used by the following domain.v Party Domain
136 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
INCOME_SOURCE_ID A unique, system-generated key thatidentifies an income source in thesystem.
BIGINT Not Null Yes
CURRENCY_TP_CD Identifies the currency of the amountcolumns.
BIGINT Null No
CONT_ID A unique, system-generated key thatidentifies a party in the system.
BIGINT Not Null No
INCOME_SRC_TP_CD Identifies the type of income sourcethat the party provided. For example,"annual salary," "estimated net worth,""Ownership of Bonds," and so forth.
BIGINT Null No
INCOME_SOURCE_DESC
Stores comments provided by theuser concerning the income sourceprovided by the party.
VARCHAR(255) Null No
ANNUAL_AMT Annual Amount is used when theIncome Source Type Code requires anamount provided by the party.
DECIMAL(17,3) Not Null No
INVEST_EXPER_YRS Investment Experience in Years isused when the Income Source TypeCode requires a length of ownershipin years to be provided by the party.
SMALLINT Null No
INFO_OBTAINED_DT The date that the information wasobtained from the party.
TIMESTAMP Not Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
INSURANCEPRODUCTThe INSURANCEPRODUCT table contains information on products that are ahardened subtype of PRODUCT.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
PRODUCT_ID A unique, system-generated key thatidentifies a product in the system.
BIGINT Not Null Yes
Chapter 1. Tables 137
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
LOBRELThe LOBREL table represents the party ownership by a line of business. Forexample, John Smith owned by Home Insurance, or Jane Doe owned by Retailbanking.
This table is used by the following domains.v Account Domainv Party Domain
Name Comment Datatype Null Option Is PK
LOB_REL_ID A unique, system-generated key thatidentifies a lob relationship with anentity in the system.
BIGINT Not Null Yes
ENTITY_NAME Entity Name is the name of thebusiness entity that is part of thisrelationship.
VARCHAR(20) Not Null No
INSTANCE_PK Entity Instance primary key is theactual primary key of the row in thelogical entity that is part of thisrelationship.
BIGINT Not Null No
LOB_TP_CD Identifies the unique type code for aspecific line of business.
BIGINT Not Null No
LOB_REL_TP_CD Identifies the unique type code for aspecific line of business relationshiptype.
BIGINT Not Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
138 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
LOCATIONGROUPThe LOCATIONGROUP table links locations, such as addresses and telephonenumbers, to contacts and contains rules for use.
This table is used by the following domains.v Account Domainv Party Domain
Name Comment Datatype Null Option Is PK
LOCATION_GROUP_ID A unique, system-generated key thatidentifies a location group in thesystem.
BIGINT Not Null Yes
UNDEL_REASON_TP_CD
Identifies the reason for not using aparticular address. Some examplevalues are "returned mail," "change inzip code," and so forth.
BIGINT Null No
CONT_ID A unique, system-generated key thatidentifies a party in the system.
BIGINT Not Null No
MEMBER_IND Indicates that the party is a memberof the "household", in this case asimplistic representation, as it is onlyused in conjunction with commonaddresses.
CHAR(1) Null No
PREFERRED_IND Indicates that the Party "prefers" touse this particular location forcorrespondence.
CHAR(1) Null No
SOLICIT_IND Determines whether this party besolicited at this specific locationgroup.
CHAR(1) Null No
LOC_GROUP_TP_CODE Determines the type of the locationgroup. The value "A" indicates anaddress, and the values "C" indicatescontact method.
CHAR(1) Not Null No
Chapter 1. Tables 139
Name Comment Datatype Null Option Is PK
EFFECT_START_MMDD The two-digit month and two-digitday which the Party wishes thiscontact point to be used. It is usedwith the Effective End Month Day toidentify a date range of when thisparty contact point relationshipshould be used.
SMALLINT Null No
EFFECT_END_MMDD The two digit month and two digitday which the Party wishes thiscontact point to be used. It is usedwith the Effective Start Month Day toidentify a date range of when thisparty contact point relationshipshould be used.
SMALLINT Null No
EFFECT_START_TM The time of day when a party isavailable at this location group.
INTEGER Null No
EFFECT_END_TM The time of day when a party is nolonger available at this locationgroup.
INTEGER Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
LAST_USED_DT The date that this data was last used.There is no business logic associatedwith this field.
TIMESTAMP Null No
LAST_VERIFIED_DT The date that this data was lastverified. There is no business logicassociated with this field.
TIMESTAMP Null No
SOURCE_IDENT_TP_CD Identifies the type for the sourceidentifier.
BIGINT Null No
140 InfoSphere MDM 11.0: MDM Physical Data Dictionary
MACROROLEASSOCThe MACROROLEASSOC table represents an association between a contact'smacro role and its child data. For instance, as "prospect" (macro role), the systemcan capture that party's email address (associated party child data),"[email protected]". Child data must exist before it can be associated with amacro role.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
MACROROLE_ASSOC_ID
A unique, system-generated key thatidentifies a party macro roleassociation in the system.
BIGINT Not Null Yes
CONT_MACRO_ROLE_ID
A unique, system-generated key thatidentifies a party macro role in thesystem.
BIGINT Not Null No
ENTITY_NAME The name of the entity which is beingassociated with the party macro role.This will be the name of the entityrepresenting party child data.Examples includes "PERSONNAME","ADDRESSGROUP" and so forth.
VARCHAR(30) Not Null No
INSTANCE_PK The ID of the entity that is beingassociated with the party macro role.This will be the ID of the entityrepresenting party child data.
BIGINT Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
END_REASON_TP_CD Identifies the cause for why arelationship was ended. For example,a spousal party-to-party relationshipcan be ended for a "divorce" reason.
BIGINT Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
Chapter 1. Tables 141
MISCVALUEThe MISCVALUE table records miscellaneous values that can be generated fromother systems in the enterprise or can specific details an institution would like torecord about its customer base.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
MISCVALUE_ID The primary key of MiscellaneousValue.
BIGINT Not Null Yes
INSTANCE_PK The actual primary key of the row inthe logical entity that has the value.
BIGINT Not Null No
ENTITY_NAME The name of the business entity thathas the value. For example:CONTACT.
VARCHAR(20) Not Null No
MISCVALUE_TP_CD This is the miscellaneous value typethat corresponds to a particularmiscellaneous value category. Someexamples of miscellaneous value typeare number of employees, gold value,credit card risk score, and so forth.
BIGINT Not Null No
VALUE_STRING The value content. For example, for acredit risk score record 8.
VARCHAR(150) Null No
PRIORITY_TP_CD Identifies the priority of a task, acampaign, value and so forth.Examples include high, medium, low.
BIGINT Null No
SOURCE_IDENT_TP_CD Identifies the type for the sourceidentifier.
BIGINT Null No
DESCRIPTION Provides extra information. VARCHAR(255) Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
142 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
VALUEATTR_TP_CD_0 The value attribute type thatcorresponds to a particularmiscellaneous value type. Someexamples of the value attribute typesare number of employees, gold value,credit card risk score, status, effectivedate, number of products and soforth.
BIGINT Null No
ATTR0_VALUE The Attribute Value field. VARCHAR(150) Null No
VALUEATTR_TP_CD_1 The value attribute type thatcorresponds to a particularmiscellaneous value type. Someexamples of the value attribute typesare number of employees, gold value,credit card risk score, status, effectivedate, number of products and soforth.
BIGINT Null No
ATTR1_VALUE The Attribute Value field. VARCHAR(150) Null No
VALUEATTR_TP_CD_2 The value attribute type thatcorresponds to a particularmiscellaneous value type. Someexamples of the value attribute typesare number of employees, gold value,credit card risk score, status, effectivedate, number of products and soforth.
BIGINT Null No
ATTR2_VALUE The Attribute Value field. VARCHAR(150) Null No
VALUEATTR_TP_CD_3 The value attribute type thatcorresponds to a particularmiscellaneous value type. Someexamples of the value attribute typesare number of employees, gold value,credit card risk score, status, effectivedate, number of products and soforth.
BIGINT Null No
ATTR3_VALUE The Attribute Value field. VARCHAR(150) Null No
VALUEATTR_TP_CD_4 The value attribute type thatcorresponds to a particularmiscellaneous value type. Someexamples of the value attribute typesare number of employees, gold value,credit card risk score, status, effectivedate, number of products and soforth.
BIGINT Null No
ATTR4_VALUE The Attribute Value field. VARCHAR(150) Null No
VALUEATTR_TP_CD_5 The value attribute type thatcorresponds to a particularmiscellaneous value type. Someexamples of the value attribute typesare number of employees, gold value,credit card risk score, status, effectivedate, number of products and soforth.
BIGINT Null No
ATTR5_VALUE The Attribute Value field. VARCHAR(150) Null No
Chapter 1. Tables 143
Name Comment Datatype Null Option Is PK
VALUEATTR_TP_CD_6 The value attribute type thatcorresponds to a particularmiscellaneous value type. Someexamples of the value attribute typesare number of employees, gold value,credit card risk score, status, effectivedate, number of products and soforth.
BIGINT Null No
ATTR6_VALUE The Attribute Value field. VARCHAR(150) Null No
VALUEATTR_TP_CD_7 The value attribute type thatcorresponds to a particularmiscellaneous value type. Someexamples of the value attribute typesare number of employees, gold value,credit card risk score, status, effectivedate, number of products and soforth.
BIGINT Null No
ATTR7_VALUE The Attribute Value field. VARCHAR(150) Null No
VALUEATTR_TP_CD_8 The value attribute type thatcorresponds to a particularmiscellaneous value type. Someexamples of the value attribute typesare number of employees, gold value,credit card risk score, status, effectivedate, number of products and soforth.
BIGINT Null No
ATTR8_VALUE The Attribute Value field. VARCHAR(150) Null No
VALUEATTR_TP_CD_9 The value attribute type thatcorresponds to a particularmiscellaneous value type. Someexamples of the value attribute typesare number of employees, gold value,credit card risk score, status, effectivedate, number of products and soforth.
BIGINT Null No
ATTR9_VALUE The Attribute Value field. VARCHAR(150) Null No
NATIVEKEYThe NATIVEKEY table provides the link between the system Contract ID and theexternal administrative system Contract ID.
This table is used by the following domains.v Account Domainv Party Domain
Name Comment Datatype Null Option Is PK
NATIVE_KEY_ID A unique, system-generated key thatidentifies a contract native key in thesystem.
BIGINT Not Null Yes
144 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
ADMIN_CONTRACT_ID The actual text or number that is usedin the administrative source system toidentify a contract.
VARCHAR(150) Null No
CONTRACT_ID A unique, system-generated key thatidentifies a contract component in thesystem.
BIGINT Not Null No
ADMIN_FLD_NM_TP_CD
Identifies the field name that thenative key refers to, for example,policy number, policy suffix, accountnumber, branch, and so forth.
BIGINT Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
CONTRACT_COMP_IND
Describes which table the native keyapplies to. If the contract componentindicator is 'Y', the native key appliesto the Contract Component. If thecontract indicator is not 'Y', the nativekey applies to the Contract. Thecontract ID is the value from theContract Component (the contractcomponent ID).
CHAR(1) Null No
ORGThe ORG table is a subtype of CONTACT and represents a non-human legal entity.For example, incorporated companies, nonprofit organizations,sole-proprietorships, partnerships, trusts, and so forth.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
CONT_ID A unique, system-generated key thatidentifies a party in the system.
BIGINT Not Null Yes
ORG_TP_CD Identifies the classification of theorganization. For example: trust,company, charity, estate, etc.
BIGINT Not Null No
INDUSTRY_TP_CD The industry type for theorganization. For example: SIC.
BIGINT Null No
Chapter 1. Tables 145
Name Comment Datatype Null Option Is PK
ESTABLISHED_DT The date that the company or charitywas established. For trusts, this is theinception date.
TIMESTAMP Null No
BUY_SELL_AGR_TP_CD An identifier that uniquely separatesone type of buy-sell agreement fromanother.
BIGINT Null No
PROFIT_IND Indicates whether the organizationhas a Profit or Non-profit status.
CHAR(1) Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
ORGNAMEThe ORGNAME table contains the different names that an organization uses.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
ORG_NAME_ID A unique, system-generated key thatidentifies a organization name in thesystem.
BIGINT Not Null Yes
ORG_NAME_TP_CD Identifies the type of name for thisorganization. For example: "Legal","Doing Business As", "Abbreviated",and so forth.
BIGINT Not Null No
CONT_ID A unique, system-generated key thatidentifies a party in the system.
BIGINT Not Null No
ORG_NAME The actual text of the organizationname. The text should correspond toone of the types of names identifiedin the Organization Name Type Code.
VARCHAR(255) Not Null No
S_ORG_NAME A standardized spelling of theorganization's name that is used forsearching.
VARCHAR(255) Null No
NAME_SEARCH_KEY Not currently used. VARCHAR(30) Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
146 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
LAST_USED_DT The date that this data was last used.There is no business logic associatedwith this field.
TIMESTAMP Null No
LAST_VERIFIED_DT The date that this data was lastverified. There is no business logicassociated with this field.
TIMESTAMP Null No
SOURCE_IDENT_TP_CD Identifies the type for the sourceidentifier.
BIGINT Null No
P_ORG_NAME The phonetic key for OrganizationName.
VARCHAR(20) Null No
STANDARD_IND Indicates whether the ORGNAMErecord contains standardized content.
CHAR(1) Null No
PAYMENTSOURCEThe PAYMENTSOURCE table is the abstract supertype for the various paymentsource subtypes in the system: BANKACCOUNT, CHARGECARD, andPAYROLLDEDUCTION.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
PAYMENT_SOURCE_ID A unique, system-generated key thatidentifies a payment source in thesystem.
BIGINT Not Null Yes
PAYMENT_SRC_CODE Designates the type of paymentsource as follows: P - Payrolldeduction; C - Charge card; B - Bankaccount.
CHAR(1) Not Null No
START_DT The date that the payroll deduction,charge card, or bank account recordbecame effective or was recorded.
TIMESTAMP Not Null No
Chapter 1. Tables 147
Name Comment Datatype Null Option Is PK
END_DT The date that the payroll deduction,charge card, or bank account record isno longer effective.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
CONT_ID A unique, system-generated key thatidentifies a party in the system.
BIGINT Not Null No
PAYROLLDEDUCTIONThe PAYROLLDEDUCTION table represents a contact's payroll deduction paymentsource information that is used to pay one or more contracts or accounts.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
PAYMENT_SOURCE_ID A unique, system-generated key thatidentifies a payment source in thesystem.
BIGINT Not Null Yes
EMPLOYER_NAME The full name of the employer whenusing payroll deduction to pay for acontract or account.
VARCHAR(255) Not Null No
PAYROLL_NO The identifier assigned to uniquelyidentifies the employee when usingpayroll deduction to pay for acontract or account
VARCHAR(50) Not Null No
DESCRIPTION Provides extra space for informationthat can be used for an additionaldefinition or as free form commentsto provide further meaning.
VARCHAR(255) Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
148 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
PERSONThe PERSON table is a subtype of CONTACT and represents a human being as alegal entity.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
CONT_ID A unique, system-generated key thatidentifies a party in the system.
BIGINT Not Null Yes
MARITAL_ST_TP_CD The marital status of a person. Forexample, single, widowed, divorced,and so forth.
BIGINT Null No
BIRTHPLACE_TP_CD A Country Type Code identifying thecountry of birth.
BIGINT Null No
CITIZENSHIP_TP_CD The country where an individual is acitizen.
BIGINT Null No
HIGHEST_EDU_TP_CD The level of schooling that this personhas received. For examples, highschool, college, university, and soforth.
BIGINT Null No
AGE_VER_DOC_TP_CD An identifier that uniquely separatesone type of document being used toverify a client's age from another. Forexample, birth certificate, or driver'slicense.
BIGINT Null No
GENDER_TP_CODE Identifies the sex of a person. CHAR(1) Null No
BIRTH_DT The date of birth of the person. TIMESTAMP Null No
DECEASED_DT The date of death of the person. TIMESTAMP Null No
CHILDREN_CT The total number of children that aperson has.
SMALLINT Null No
DISAB_START_DT The date the person became disabled. TIMESTAMP Null No
DISAB_END_DT The date the person ceased beingdisabled.
TIMESTAMP Null No
USER_IND Indicates whether this a person is auser of the system.
CHAR(1) Null No
Chapter 1. Tables 149
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
PERSONNAMEThe PERSONNAME table contains the names that are used by a person.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
PERSON_NAME_ID A unique, system-generated key thatidentifies a person name in thesystem.
BIGINT Not Null Yes
PREFIX_NAME_TP_CD Identifies the party's name prefix. Forexample, Mr., Mrs., Dr., and so forth.
BIGINT Null No
PREFIX_DESC The actual prefix of name if the Prefixof Name Type Code's value is "other."
VARCHAR(20) Null No
NAME_USAGE_TP_CD Identifies the type of name for thisperson. For example, "Legal", "NickName", or "Maiden Name".
BIGINT Not Null No
GIVEN_NAME_ONE The first given name (commonlyknown as the first name) of a person.
VARCHAR(25) Null No
GIVEN_NAME_TWO The second given name (commonlyknown as the middle name) of aperson.
VARCHAR(25) Null No
GIVEN_NAME_THREE
The third given name (commonlyknown as the middle name) of aperson.
VARCHAR(25) Null No
GIVEN_NAME_FOUR The fourth given name (commonlyknown as the middle name) of aperson.
VARCHAR(25) Null No
LAST_NAME Identifies the surname or family name(commonly known as the last name)of a person.
VARCHAR(30) Not Null No
150 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
GENERATION_TP_CD Identifies familial generationalinformation in the form of ageneration name type code. Forexample, The First, The Second,Junior or Senior.
BIGINT Null No
SUFFIX_DESC Identifies the name suffix of a person.For example: "Jr.", "MD", "Esq", andso forth.
VARCHAR(20) Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
CONT_ID A unique, system-generated key thatidentifies a party in the system.
BIGINT Not Null No
USE_STANDARD_IND Determines whether the standardizedname is used for this party.
CHAR(1) Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
LAST_USED_DT The date that this data was last used.There is no business logic associatedwith this field.
TIMESTAMP Null No
LAST_VERIFIED_DT The date that this data was lastverified. There is no business logicassociated with this field.
TIMESTAMP Null No
SOURCE_IDENT_TP_CD Identifies the type for the sourceidentifier.
BIGINT Null No
P_LAST_NAME The phonetic key for Last Name. VARCHAR(20) Null No
P_GIVEN_NAME_ONE The phonetic key for Given NameOne.
VARCHAR(20) Null No
P_GIVEN_NAME_TWO The phonetic key for Given NameTwo.
VARCHAR(20) Null No
P_GIVEN_NAME_THREE
The phonetic key for Given NameThree.
VARCHAR(20) Null No
P_GIVEN_NAME_FOUR The phonetic key for Given NameFour.
VARCHAR(20) Null No
Chapter 1. Tables 151
PERSONSEARCHThe PERSONSEARCH table contains the standardized or non-standardizedversions of the PERSON NAME table to facilitate searching.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
PERSON_SEARCH_ID A unique, system-generated key thatidentifies a person search record inthe system.
BIGINT Not Null Yes
PERSON_NAME_ID A unique, system-generated key thatidentifies a person name record in thesystem.
BIGINT Not Null No
CONT_ID A unique, system-generated key thatidentifies a party in the system.
BIGINT Not Null No
GIVEN_NAME_ONE The first given name (commonlyknown as a first name) of the person.If standardization of the name hastaken place, the standardized versionof the name will be stored here.
VARCHAR(25) Null No
GIVEN_NAME_TWO The second given name (commonlyknown as a middle name) of theperson. If standardization of the namehas taken place, the standardizedversion of the name will be storedhere.
VARCHAR(25) Null No
GIVEN_NAME_THREE The third given name (commonlyknown as a middle name) of theperson. If standardization of the namehas taken place, the standardizedversion of the name will be storedhere.
VARCHAR(25) Null No
GIVEN_NAME_FOUR The fourth given name (commonlyknown as a middle name) of theperson. If standardization of the namehas taken place, the standardizedversion of the name will be storedhere.
VARCHAR(25) Null No
LAST_NAME The last name of a person. Ifstandardization of the name has takenplace, the standardized version of thename will be stored here.
VARCHAR(30) Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
152 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
STANDARD_IND Indicates whether thePERSONSEARCH record containsstandardized content.
CHAR(1) Null No
PHONENUMBERThe PHONENUMBER table contains a contact's phone number.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
PHONE_NUMBER_ID A unique, system-generated key thatidentifies a phone number in thesystem.
BIGINT Not Null Yes
COUNTRY_CODE The part of the phone number thatrepresents the country.
VARCHAR(4) Null No
AREA_CODE The part of the phone number thatrepresents the area (finer grained thancountry). In North America, forexample, it would be the '905' portionof (905) 555-1234. Germany can have2 to 5 digits in their area code.
VARCHAR(6) Null No
EXCHANGE The part of the phone number thatrepresents the exchange (finer grainedarea than the area code). In NorthAmerica, for example, it would be the'555' portion of (905) 555-1234.
VARCHAR(6) Null No
PH_NUMBER The part of the phone number thatrepresents the local number. In NorthAmerica, for example, it would be the'1234' portion of (905) 555-1234.
VARCHAR(20) Null No
EXTENSION The part of the phone number thatrepresents the extension (typicallyapplicable for business phonenumbers). It would be the '56789'portion of (905) 555-1234 ext. 56789.
VARCHAR(8) Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
Chapter 1. Tables 153
Name Comment Datatype Null Option Is PK
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
CONTACT_METHOD_ID
A unique, system-generated key thatidentifies a contact method in thesystem.
BIGINT Not Null No
PPREFACTIONOPTThe PPREFACTIONOPT table stores the action types that are possible options foreach privacy preference type.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
PPREF_ACT_OPT_ID The Privacy Preference Action Optionprimary key. Identifies the action typesubset available as options for aspecific privacy preference type.
BIGINT Not Null Yes
PPREF_TP_CD Used to indicate the type of privacypreference being stored, for example:credit worthiness, personal info, andso forth.
BIGINT Not Null No
PPREF_ACTION_TP_CD Identifies the action to be taken basedon the privacy preference set by thecustomer or by company defaultsetting. For example: Do not call, Donot mail.
BIGINT Not Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
154 InfoSphere MDM 11.0: MDM Physical Data Dictionary
PPREFDEFThe PPREFDEF table captures the default privacy preference regulations for aninstitution. The privacy preference default settings apply to all parties within thesystem.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
PPREF_ID The Privacy Preference Recordprimary key.
BIGINT Not Null Yes
PPREF_SEG_TP_CD The segment associated with theprivacy preference record.
BIGINT Null No
REGULATION_VALUE The privacy preference defaultregulation value which can be thename of the regulation.
VARCHAR(255) Null No
DEFAULT_IND This is the indicator for the defaultprivacy preference.
CHAR(1) Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
PPREFDEFRELThe PPREFDEFREL table defines the parent child relationship between two defaultprivacy preference records, allowing for different privacy preference regulations tosupersede other regulations that are based on different criteria.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
PPREFDEFREL_ID A unique, system-generated key thatidentifies a relationship that twoprivacy preference records can havebetween one another in the system.
BIGINT Not Null Yes
PARENT_PPREF_ID The primary key for the parent of therelationship.
BIGINT Not Null No
CHILD_PPREF_ID The primary key for the child of therelationship.
BIGINT Not Null No
Chapter 1. Tables 155
Name Comment Datatype Null Option Is PK
REL_DESC Provides extra space for informationthat can be used for an additionaldefinition or as free form commentsto provide further meaning.
VARCHAR(255) Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TXN_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
PPREFENTITYThe PPREFENTITY table stores customized privacy and preference information fora contact, address, contact method, and contract role location.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
PPREF_ID A unique, system-generated key thatidentifies a privacy preference objectin the system.
BIGINT Not Null Yes
PPREF_ENTITY The name of the business entity thathas the privacy preference.
VARCHAR(50) Null No
PPREF_INSTANCE_PK The actual primary key of the row inthe logical entity that has the privacypreference.
BIGINT Null No
PPREF_REASON_TP_CD Identifies the reason given bycustomer for making a privacypreference selection.
BIGINT Not Null No
SOURCE_IDENT_TP_CD Identifies the type for the sourceidentifier.
BIGINT Not Null No
156 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
PPREFINSTANCEThe PPREFINSTANCE table identifies the entity instance that is associated with aprivacy preference record. For example, a party has a preference for a newproduct.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
PPREF_INST_ID A unique, system-generated key thatidentifies a privacy preferenceinstance in the system.
BIGINT Not Null Yes
PPREF_ID The Privacy Preference Recordprimary key.
BIGINT Not Null No
ENTITY_NAME The name of the business entity thatis associated with the privacypreference values.
VARCHAR(20) Not Null No
INSTANCE_PK The actual primary key of the row inthe logical entity that is associatedwith the privacy preference values.
BIGINT Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
Chapter 1. Tables 157
PRIVPREFThe PRIVPREF table stores all privacy and preference records for a contact.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
PPREF_ID A unique, system-generated key thatidentifies a privacy preference in thesystem.
BIGINT Not Null Yes
PPREF_ACT_OPT_ID The Privacy Preference Action Optionprimary key. Identifies the action typesubset available as options for aspecific privacy preference type.
BIGINT Null No
PPREF_TP_CD Privacy Preference Type Codeidentifies the particular type ofprivacy preference related to theentity.
BIGINT Not Null No
VALUE_STRING Stores the actual privacy preferencevalue for the type identified and theentity or instance pk identified. Forexample, entity "Contact" instance"10001" has a preference type"Preferred Salutation" with a value of"Mike".
VARCHAR(50) Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
PRODTPRELThe PRODTPREL table stores the relationship type between two product records.These relationships can be used in combinations to provide a hierarchy ofproducts.
This table is used by the following domain.v Party Domain
158 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
PROD_TP_REL_ID A unique, system-generated key thatidentifies a product type relationshipin the system.
BIGINT Not Null Yes
FROM_PROD_TP_CD The type of product associated withthe contract (or at some level withinthe product family). Examples includeUniversal Life, Savings, Checking,Term Life, Auto, and so forth.
BIGINT Not Null No
TO_PROD_TP_CD The type of product associated withthe contract (or at some level withinthe product family). Examples includeUniversal Life, Savings, Checking,Term Life, Auto, and so forth.
BIGINT Not Null No
PRODREL_TP_CD Identifies the type of relationship thattwo products can have between oneanother. For example: "categorize".
BIGINT Not Null No
REL_DESC Provides extra space for informationthat can be used for an additionaldefinition or as free form commentsto provide further meaning.
VARCHAR(255) Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TXN_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
PRODUCTThe PRODUCT table contains information on items that are of interest to abusiness.
This table is used by the following domains.v Account Domainv Product Domain
Name Comment Datatype Null Option Is PK
PRODUCT_ID A unique, system-generated key thatidentifies a product in the system.
BIGINT Not Null Yes
Chapter 1. Tables 159
Name Comment Datatype Null Option Is PK
PRODUCT_TYPE_ID The identifier that describes whattype of product this is.
BIGINT Not Null No
NAME The name of the product. VARCHAR(120) Not Null No
SHORT_DESCRIPTION A short description of the product. VARCHAR(255) Null No
DESCRIPTION A long description of the product. VARCHAR(500) Null No
PROD_STRUC_TP_CD The basic structure of the product.Examples include Standalone, Bundle,and so forth.
BIGINT Not Null No
STATUS_TP_CD The lifecycle status of the product. BIGINT Null No
STATUS_REASON_TP_CD
Why the product is in its currentlifecycle state.
BIGINT Null No
AVAILABILITY_TP_CD How widely available the product isto the target market. For example,general availability, restrictedavailability.
BIGINT Null No
PRIMARY_TARGET_MARKET_TP_CD
A primary market this producttargets.
BIGINT Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
VARIANT_ALLOWED_IND
This indicates whether or not aProduct can have variant products.
CHAR(1) Null No
VARIANT_OF_PRODUCT_ID
This column stores the Product ID ofthe Root Product.
BIGINT Null No
RESOLUTION_IND Indicates whether the product recordhas been resolved through either acollapse or split operation. A value of'Y' means the product has beenresolved and is inactive. A value of'N' or blank means the product is stillactive.
CHAR(1) Null No
RESOLUTION_TP_CD Identifies the current resolution for aparticular entity record. For example,collapsing, merging, or splitting aproduct record.
BIGINT Null No
160 InfoSphere MDM 11.0: MDM Physical Data Dictionary
PRODUCTCATEGORYASSOCThe PRODUCTCATEGORYASSOC table contains information on a product'sassociation with a category.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
PRODUCT_CATEGORY_ASSOC_ID
A unique, system-generated key thatidentifies an association between aproduct and category in the system.
BIGINT Not Null Yes
PRODUCT_ID The product that is associated to thecategory.
BIGINT Not Null No
CATEGORY_ID The category the product is associatedwith.
BIGINT Not Null No
HIERARCHY_ID The hierarchy the category belongs to. BIGINT Not Null No
START_DT The date when the associationbecomes active.
TIMESTAMP Not Null No
END_DT The date when the associationbecomes inactive.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
PRODUCTCONTRACTRELThe PRODUCTCONTRACTREL table holds the relationship between a productand a contract.
This table is used by the following domain.v Account Domain
Name Comment Datatype Null Option Is PK
PROD_CONT_REL_ID A unique, system-generated key thatidentifies a Product ContractRelationship in the system.
BIGINT Not Null Yes
PRODUCT_ID A unique, system-generated key thatidentifies a Product in the system.
BIGINT Not Null No
Chapter 1. Tables 161
Name Comment Datatype Null Option Is PK
CONTRACT_ID A unique, system-generated key thatidentifies a Contract in the system.
BIGINT Not Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
PROD_CONT_REL_TP_CD
The type of the relationship betweenthe product and the contract.
BIGINT Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
PRODUCTEQUIVThe PRODUCTEQUIV table stores information about how a product is identifiedin a different system.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
PRODUCT_EQUIV_ID A unique, system-generated key thatidentifies a product equivalence in thesystem.
BIGINT Not Null Yes
PRODUCT_ID The product represented by theproduct equivalence.
BIGINT Not Null No
ADMIN_SYS_TP_CD Uniquely identifies the administrativesource system for a contract.Examples include Ingenium, Alltel,Huon, and so forth.
BIGINT Not Null No
PRODUCT_EQUIV_KEY A representation of the full keyconcatenated and formatted.
VARCHAR(160) Null No
KEY_1 First part of the key. VARCHAR(30) Not Null No
KEY_2 Second part of the key. VARCHAR(30) Null No
KEY_3 Third part of the key. VARCHAR(30) Null No
KEY_4 Fourth part of the key. VARCHAR(30) Null No
KEY_5 Fifth part of the key. VARCHAR(30) Null No
162 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
PRODUCTIDENTIFIERThe PRODUCTIDENTIFIER table contains a client-defined identifier for theproduct such as a part number or product code.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
PRODUCT_IDENTIFIER_ID
A unique, system-generated key thatidentifies a product identifier in thesystem.
BIGINT Not Null Yes
PRODUCT_ID The product to which the identifierbelongs.
BIGINT Not Null No
PRODUCT_IDENTIFIER_TP_CD
The code that describes the identifier. BIGINT Not Null No
REF_NUM The identifier value. VARCHAR(50) Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
Chapter 1. Tables 163
PRODUCTMATCHRESULTThis table contains the match result details of the suspect records. Each record isproduced by a suspect match engine described by its code type.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
MATCH_RESULT_ID A system-generated key that uniquelyidentifies a product suspect duplicatematch result record.
BIGINT Not Null Yes
SUSPECT_ID The ID of the suspect duplicate recordthat this match result belongs to.
BIGINT Not Null No
MATCH_RESULT The match result of the suspectduplicate record.
VARCHAR(20) Not Null No
MATCH_DETAIL The match detail of the suspectduplicate record.
XML Null No
MATCH_ENGINE_TP_CD
Suspect duplicate match engine codetype.
BIGINT Not Null No
SPEC_ID The spec that describes the definitionof the spec values.
BIGINT Null No
SPEC_FMT_ID The format, or version, of the specthat these spec values validate to.
BIGINT Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
PRODUCTNLSThe PRODUCTNLS table is the localization table for the Product table, containingany localization data for fields that must be localized.
This table is used by the following domain.v Product Domain
164 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
PRODUCT_NLS_ID A unique, system-generated key thatidentifies a localized product in thesystem.
BIGINT Not Null Yes
PRODUCT_ID The product the Product NLS belongsto.
BIGINT Not Null No
LANG_TP_CD Identifies a spoken language such asEnglish, French, Spanish, German, etc.
BIGINT Not Null No
NAME The localized name of the product. VARCHAR(120) Not Null No
SHORT_DESCRIPTION A localized short description of theproduct.
VARCHAR(255) Null No
DESCRIPTION A localized long description of theproduct.
VARCHAR(500) Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
PRODUCTPARTYROLEThe PRODUCTPARTYROLE table represents an association that links contacts tothe various roles they can have on a product.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
PRODUCT_PARTY_ROLE_ID
A unique, system-generated key thatidentifies a product party role in thesystem.
BIGINT Not Null Yes
PRODUCT_ID A unique, system-generated key thatidentifies a product instance in thesystem.
BIGINT Null No
CONT_ID A unique, system-generated key thatidentifies a party in the system.
BIGINT Null No
ADMIN_CLIENT_ID Uniquely identifies the primary keyfor a party in the administrativesource system.
VARCHAR(250) Null No
ADMIN_PRODUCT_ID Uniquely identifies the primary keyfor a product in the administrativesource system.
VARCHAR(250) Null No
Chapter 1. Tables 165
Name Comment Datatype Null Option Is PK
ADDITIONAL_DETAILS Any additional details to be capturedabout the role.
VARCHAR(250) Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
END_REASON_TP_CD Identifies the cause for why a rolewas ended.
BIGINT Null No
PRODUCT_PARTY_ROLE_TP_CD
Identifies the type of role that a partycan have on a product. For example"Supplier", "Vendor", "Retailer", "ItemAnalyst", or "Consumer".
BIGINT Not Null No
ADMIN_SYS_TP_CD Uniquely identifies the administrativesource system for a party or product.
BIGINT Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
PRODUCTRELThe PRODUCTREL table holds information about the relationship between twoproducts. Relationships can be used to determine product substitutes, up-sells,cross-sells, and they can also be used to form bundles and coarser-grain productsmade up of product components.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
PRODUCT_REL_ID A unique, system-generated key thatidentifies a relationship between twoproducts in the system.
BIGINT Not Null Yes
FROM_PROD_ID The source product in therelationship.
BIGINT Not Null No
TO_PROD_ID The target product in the relationship. BIGINT Not Null No
PRODUCT_REL_TP_CD The type of relationship. BIGINT Not Null No
START_DT The date when the relationshipbecomes active.
TIMESTAMP Not Null No
166 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
END_DT The date when the relationshipbecomes inactive.
TIMESTAMP Null No
REL_DESC Description of the productrelationship.
VARCHAR(255) Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
MIN_QUANTITY Indicates the minimum quantity. BIGINT Null No
MAX_QUANTITY Indicates the maximum quantity. BIGINT Null No
PRODUCTSUSPECTThis table contains records of pairs of products which are marked as suspect eitherby user or system.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
SUSPECT_ID A system-generated key that uniquelyidentifies a product suspect duplicaterecord.
BIGINT Not Null Yes
SOURCE_ENTITY_ID The ID of the source product. BIGINT Not Null No
SUSPECT_ENTITY_ID The ID of the suspect duplicateproduct.
BIGINT Not Null No
SUSP_ST_TP_CD The status code type of the suspectduplicate record.
BIGINT Not Null No
SOURCE_TP_CD The source code type of the suspectduplicate record.
BIGINT Not Null No
SUSPECT_TP_CD The suspect code type of the suspectduplicate record.
BIGINT Null No
CREATED_BY The user who created the record. VARCHAR(20) Null No
Chapter 1. Tables 167
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
PRODUCTTYPEThe PRODUCTTYPE table is a type of product that, unless it is the root producttype, is a subtype of another product type.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
PRODUCT_TYPE_ID A unique, system-generated key thatidentifies a type of product that(unless is the root product type) is asubtype of another product type, inthe system.
BIGINT Not Null Yes
NAME The name of the product type. VARCHAR(50) Not Null No
DESCRIPTION The description of the product type. VARCHAR(255) Null No
PARENT_PROD_TYPE_ID
The parent type for this type. BIGINT Null No
NODE_TP_CD Describes the level of the producttype and is required to understandwhat is hardened in the databasemodel or not.
BIGINT Not Null No
METADATA_INFO_TP_CD
The ID of the metadata package thisspec belongs to.
BIGINT Not Null No
START_DT The date when the type becomeseffective and can create products ofthat type.
TIMESTAMP Not Null No
END_DT The date when the type is no longereffective and can no longer createproducts of that type. Note thatproducts of the type will continue toexist.
TIMESTAMP Null No
168 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
PRODUCTTYPENLSThe PRODUCTTYPENLS table is the localization table for the ProductType table,containing any localization data for fields that must be localized.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
PRODUCT_TYPE_NLS_ID
A unique, system-generated key thatidentifies a localized product type inthe system.
BIGINT Not Null Yes
PRODUCT_TYPE_ID The product type the localizedproduct type belongs to.
BIGINT Not Null No
LANG_TP_CD Identifies the language for which theproduct type has been localized.
BIGINT Not Null No
NAME The name of the product type for aparticular locale.
VARCHAR(120) Not Null No
DESCRIPTION The description of the product typefor a particular locale.
VARCHAR(500) Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
Chapter 1. Tables 169
PRODUCTVALThe PRODUCTVAL table contains a set of values based on a spec format,representing the product's association to some other entity such as the producttype. Values are based on spec formats associated to the product type aremaintained in this table.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
PRODUCT_VALUES_ID A unique, system-generated key thatidentifies a product value in thesystem.
BIGINT Not Null Yes
SPEC_ID The spec that describes the definitionof the values.
BIGINT Not Null No
SPEC_FMT_ID The format (or version) of the specthese values validate to.
BIGINT Not Null No
PRODUCT_ID The product these values belong to. BIGINT Not Null No
VALUE_XML The values as defined by theassociated spec format.
XML Not Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
PRODUCTVALINDEXPRODUCT VALUE INDEX TABLE records all searchable attribute values for aspecific product value (indicated by the PRODUCTVAL_ID). For databases withlimited or no native XML support, it is this table that is queried when spec valueattributes are provided as search criteria (rather than the PRODUCTVAL table).
This table is used by the following domain.v Product Domain
170 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
PRODUCTVAL_INDEX_ID
A unique, system-generated key thatidentifies a value index in the system.
BIGINT Not Null Yes
SPEC_SRCH_ATTR_ID The ID of the associated specsearchable attribute.
BIGINT Not Null No
PRODUCT_ID The ID of the associated entity. BIGINT Not Null No
PRODUCTVAL_ID The ID of the associated spec value. BIGINT Not Null No
BOOLEAN_VALUE Contains the value retrieved from theassociated spec value document usingthe associated searchable attribute'path'. It remains null if the data typeof this element is not xsd:boolean.
CHAR(1) Null No
STRING_VALUE Contains the value retrieved from theassociated spec value document usingthe associated searchable attribute'path'. It remains null if the data typeof this element is not xsd:string ormdmspec:localizedString.
VARCHAR(255) Null No
DECIMAL_VALUE Contains the value retrieved from theassociated spec value document usingthe associated searchable attribute'path'. It remains null if the data typeof this element is not xsd:decimal.
DECIMAL(31,19) Null No
LONG_VALUE Contains the value retrieved from theassociated spec value document usingthe associated searchable attribute'path'. It remains null if the data typeof this element is not xsd:long.
BIGINT Null No
DATETIME_VALUE Contains the value retrieved from theassociated spec value document usingthe associated searchable attribute'path'. It remains null if the data typeof this element is not xsd:dateTime.
TIMESTAMP Null No
DATE_VALUE Contains the value retrieved from theassociated spec value document usingthe associated searchable attribute'path'. It remains null if the data typeof this element is not xsd:date.
TIMESTAMP Null No
TIME_VALUE Contains the value retrieved from theassociated spec value document usingthe associated searchable attribute'path'. It remains null if the data typeof this element is not xsd:time.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
Chapter 1. Tables 171
Name Comment Datatype Null Option Is PK
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
STRING_VALUE_UPPER This column stores upper case ofstring_value column to improve noncase sensitive search performance.
VARCHAR(255) Null No
PRODUCTVALNLSThe PRODUCTVALNLS table is the localization table for the PRODUCTVAL table,containing any localization data for fields that must be localized.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
PRODUCT_VALUES_NLS_ID
A unique, system-generated key thatidentifies a localized product value inthe system.
BIGINT Not Null Yes
PRODUCT_VALUES_ID A unique, system-generated key thatidentifies a source product value inthe system.
BIGINT Not Null No
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.
BIGINT Not Null No
VALUE_XML The values as defined by theassociated spec format.
XML Not Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
PRODUCTVALNLSINDEXThe PRODUCTVALNLSINDEX table records all searchable attribute values for aspecific product value nls record associated with the PRODUCTVAL. For databaseswith limited or no native XML support, it is this table that is queried whenlocalized spec value attributes are provided as search criteria in the context of alocalized search.
172 InfoSphere MDM 11.0: MDM Physical Data Dictionary
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
PRODUCTVALNLS_INDEX_ID
A unique, system-generated key thatidentifies the localized value index inthe system.
BIGINT Not Null Yes
SPEC_SRCH_ATTR_ID The ID of the associated specsearchable attribute.
BIGINT Not Null No
PRODUCT_ID The ID of the associated entity. BIGINT Not Null No
PRODUCTVAL_ID The ID of the associated spec value. BIGINT Not Null No
LANG_TP_CD Identifies a spoken language, such asEnglish, French, Spanish, or German.
BIGINT Not Null No
STRING_VALUE This field contains the value retrievedfrom the associated spec valuedocument using the associatedsearchable attribute 'path'. It shouldremain null if the data type of thiselement is notmdmspec:localizedString.
VARCHAR(255) Not Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
STRING_VALUE_UPPER This column stores upper case ofstring_value column to improve noncase sensitive search performance.
VARCHAR(255) Null No
PROPERTYThe PROPERTY table contains all HOLDING records that are locations. Forexample, cottage, private residence, or condominium.
This table is used by the following domains.v Account Domainv Party Domain
Name Comment Datatype Null Option Is PK
HOLDING_ID A unique, system-generated key thatidentifies a party holding in thesystem.
BIGINT Not Null Yes
Chapter 1. Tables 173
Name Comment Datatype Null Option Is PK
ADDRESS_ID A unique, system-generated key thatidentifies an address in the system.
BIGINT Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
ROLEIDENTIFIERThe ROLEIDENTIFIER table provides an identifier for a contact's specific role on acontract.
This table is used by the following domains.v Account Domainv Party Domain
Name Comment Datatype Null Option Is PK
ROLE_IDENTIFIER_ID A unique, system-generated key thatidentifies a party contract roleidentifier in the system.
BIGINT Not Null Yes
CONTRACT_ROLE_ID A unique, system-generated key thatidentifies a party contract role in thesystem.
BIGINT Not Null No
IDENTIFIER_ID A unique, system-generated key thatidentifies a party identification in thesystem.
BIGINT Not Null No
DESCRIPTION Provides extra space for informationthat can be used for an additionaldefinition or as free form commentsto provide further meaning.
VARCHAR(255) Null No
EXPIRY_DT The date on which the particular roleidentification expires.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
174 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
ROLELOCATIONThe ROLELOCATION table represents an association between a contact's role on acontract to a particular location group.
This table is used by the following domains.v Account Domainv Party Domain
Name Comment Datatype Null Option Is PK
ROLE_LOCATION_ID A unique, system-generated key thatidentifies a party contract rolelocation in the system.
BIGINT Not Null Yes
LOCATION_GROUP_ID Location Group ID is a unique,system-generated key that identifies alocation group in the system.
BIGINT Not Null No
CONTRACT_ROLE_ID A unique, system-generated key thatidentifies a party contract role in thesystem.
BIGINT Not Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
UNDEL_REASON_TP_CD
A reason for not using a particularaddress. Some example values are"returned mail", "change in ZIP code"and so forth.
BIGINT Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
Chapter 1. Tables 175
ROLELOCPURPOSEThe ROLELOCPURPOSE table describes why contract information for a particularrole is addressed to a defined location. The location can either be an address or acontact method.
This table is used by the following domains.v Account Domainv Party Domain
Name Comment Datatype Null Option Is PK
ROLE_LOC_PURP_ID A unique, system-generated key thatidentifies a party contract rolelocation reason in the system.
BIGINT Not Null Yes
ROLE_LOCATION_ID A unique, system-generated key thatidentifies a party contract rolelocation in the system.
BIGINT Not Null No
PURPOSE_TP_CD The purpose for the location as itrelates to a role on a contract. Forexample, the owner's residenceaddress is associated with the contractfor the purpose of sendingstatements.
BIGINT Not Null No
DESCRIPTION Free form comments to provideadditional information.
VARCHAR(255) Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
ROLESITUATIONThe ROLESITUATION table defines the different arrangements that can be definedby a given party contract role. For example, time delay, or common disasterarrangements on life insurance policies.
This table is used by the following domains.v Account Domain
176 InfoSphere MDM 11.0: MDM Physical Data Dictionary
v Party Domain
Name Comment Datatype Null Option Is PK
ROLE_SITUATION_ID A unique, system-generated key thatidentifies a party situation role in thesystem.
BIGINT Not Null Yes
CONTRACT_ROLE_ID A unique, system-generated key thatidentifies a party contract role in thesystem.
BIGINT Not Null No
ARRANGEMENT_TP_CD
Describes the type of agreement thatthe party contract role has with thecontract. For example: time delayarrangement such as a commondisaster.
BIGINT Not Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
SEARCHEXCLRULEThe SEARCHEXCLRULE table provides the initial search exclusion criteria for eachsearch transaction. For example, last name only, last and given name only, or lastname and city only.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
LAST_NAME The last name value from PersonName or from Person Search.
VARCHAR(30) Not Null Yes
P_LAST_NAME The last name phonetic key fromPerson Name.
VARCHAR(30) Not Null Yes
GIVEN_NAME_ONE The "given name one" value fromPerson Name or from Person Search.
VARCHAR(30) Not Null Yes
P_GIVEN_NAME_ONE The "given name one" phonetic keyfrom Person Name.
VARCHAR(30) Not Null Yes
CITY_NAME The city name value from Address. VARCHAR(30) Not Null Yes
Chapter 1. Tables 177
Name Comment Datatype Null Option Is PK
P_CITY_NAME The city name phonetic key fromAddress.
VARCHAR(30) Not Null Yes
FREQUENCY The number of times this exclusionrule combination occurred.
BIGINT Not Null No
SERVICEPRODUCTThe SERVICEPRODUCT table contains information about non-physical productsthat are a hardened subtype of Product.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
PRODUCT_ID A unique, system-generated key thatidentifies a product in the system.
BIGINT Not Null Yes
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
SPECThe SPEC table holds information about specs available in the system.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
SPEC_ID A unique, system-generated key thatidentifies a spec in the system.
BIGINT Not Null Yes
METADATA_INFO_TP_CD
The ID of the metadata package thisspec belongs to.
BIGINT Not Null No
SPEC_NAME Name given to the spec. VARCHAR(100) Not Null No
SPEC_NAMESPACE Namespace this spec belongs to. VARCHAR(500) Not Null No
ACTIVE_FORMAT_ID The spec format that is "active" forthis spec.
BIGINT Not Null No
START_DT The date when this record becomesactive.
TIMESTAMP Not Null No
178 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
END_DT The date when this record becomesinactive.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
SPECFMTThe SPECFMT contains all the various formats or versions for a system's specs.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
SPEC_FORMAT_ID A unique, system-generated key thatidentifies a spec format in the system.
BIGINT Not Null Yes
SPEC_ID The ID of the spec this format isapplied to.
BIGINT Not Null No
EXTERNAL_XSD Client XSD for this format. CLOB(1G) Not Null No
INTERNAL_XSD Server XSD for this format. CLOB(1G) Not Null No
LOCALIZED_XSD The localized XSD information for thementioned spec format.
CLOB(1G) Null No
FORMAT_VERSION The version number for this format. BIGINT Not Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
Chapter 1. Tables 179
SPECFORMATTRANSLATIONThe SPECFORMATTRANSLATION table contains locale specific translations for aspec's attribute names.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
SPEC_FORMAT_TRANSLATION_ID
A unique, system-generated key thatidentifies a spec format translation inthe system.
BIGINT Not Null Yes
SPEC_FORMAT_ID The ID of the spec format thetranslation applies to.
BIGINT Not Null No
LANG_TP_CD Code for the translation's localelanguage.
BIGINT Not Null No
TRANSLATION An XML document holding thetranslations of a given spec'sattributes for a given locale.
CLOB(1G) Not Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
SPECSRCHATTRSPEC SEARCHABLE ATTRIBUTE records all spec attributes that are marked as'searchable' within the system. It assists with both validating that a spec attributeprovided in the context of search is in fact searchable and with the dynamicconstruction of the required SQL to perform the search.
This table is used by the following domain.v Product Domain
Name Comment Datatype Null Option Is PK
SPEC_SRCH_ATTR_ID A unique, system-generated key thatidentifies a spec searchable attributein the system.
BIGINT Not Null Yes
SPEC_ID The ID of the spec associated withthis searchable attribute.
BIGINT Not Null No
180 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Name Comment Datatype Null Option Is PK
PATH The path that identifies a searchableelement within a spec valuedocument.
VARCHAR(255) Not Null No
DATA_TYPE The data type of the elementidentified by the path.
VARCHAR(50) Not Null No
DESTINATION_ENTITY_NAME
The destination entity this spec use isrelated to.
VARCHAR(250) Not Null No
END_DT The date when this attribute is nolonger searchable.
TIMESTAMP Null No
INDEX_STATUS The current index state of thesearchable attribute.
BIGINT Not Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
SUSPECTThe SUSPECT table contains suspect duplicates (contacts that are possibleduplicates of each other) that a particular contact has in the database.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
SUSPECT_ID A unique, system-generated key thatidentifies a suspect in the system.
BIGINT Not Null Yes
CONT_ID A unique, system-generated key thatidentifies a party in the system.
BIGINT Not Null No
SUSPECT_CONT_ID A unique, system-generated key thatidentifies a party in the system.
BIGINT Not Null No
SUSP_ST_TP_CD Suspect Status Type code indicates thecurrent situation for a particularsuspect record. For example, suspectduplicate, not duplicate, underinvestigation, etc.
BIGINT Not Null No
SOURCE_TP_CD The source of the Suspect ReasonCode (system-marked oruser-marked).
BIGINT Not Null No
Chapter 1. Tables 181
Name Comment Datatype Null Option Is PK
SUSP_REASON_TP_CD The field that caused the data matchto occur.
BIGINT Null No
MATCH_RELEV_TP_CD Identifies party match relevancies,providing a description of whichelements were matched.
BIGINT Null No
ADJ_ACTION_CODE When a PARTY is identified as aSUSPECT, the SUSPECT(party ID) canhave relevancy scores dictating a 'B'action type. The client might take intoaccount relationships or roles on apolicy that can adjust the SUSPECT toan 'A' type action or alternatively a'C' type SUSPECT.
CHAR(2) Null No
ADJ_ACTION_TP_CD Identifies the business reasons for theaction code on the suspectidentification being modified.
BIGINT Null No
CREATED_BY The ID of the user, system, or otherentity that created the data.
VARCHAR(20) Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
MATCH_ENG_TP_CD Identifies the matching engine to usefor matching parties.
BIGINT Null No
WEIGHT The calculated weight used by thematching engine.
DECIMAL(17,3) Null No
CUR_SUSPECT_TP_CD Identifies the current suspect type. BIGINT Null No
CUR_MTCH_ENG_TP_CD
The current matching engine. BIGINT Null No
PERSON_ORG_CODE Indicates the Party type of the suspectduplicates.
CHAR(1) Null No
INACTIVATED_DT Indicates the earliest inactivated dateof the two suspect duplicate parties.
TIMESTAMP Null No
ACCESS_TOKEN_VALUE
An access token is a means to protecta resource from unauthorized user orgroup access. When an access tokenvalue is associated with a resourcesuch as a database record, only usersor groups that are assigned that tokencan have access to that resource.
VARCHAR(50) Null No
182 InfoSphere MDM 11.0: MDM Physical Data Dictionary
SUSPECTAUGMENTThe SUSPECTAUGMENT table contains the augmented suspect duplicateprocessing results preformed by additional matching engines.
This table is used by the following domain.v Party Domain
Name Comment Datatype Null Option Is PK
SUSPECT_AUGMENT_ID
A unique, system-generated key thatidentifies a suspect augment record inthe system.
BIGINT Not Null Yes
SUSPECT_ID The Suspect ID associated with thisrecord.
BIGINT Not Null No
ADJ_ACTION_TP_CD The type code indicating the AdjustAction type.
BIGINT Not Null No
SUSPECT_TP_CD The type code indicating the Suspecttype.
BIGINT Not Null No
WEIGHT The calculated weight for this suspectaugmentation record.
DECIMAL(17,3) Null No
MATCH_ENG_TP_CD The type code indicating thematching engine to use for matchingparties.
BIGINT Not Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
TERMCONDITIONThe TERMCONDITION table represents a logical condition, containing conditionsfor entities such as Product and Agreement. TermCondition can be static orexecutable.
This table is used by the following domains.v Account Domainv Product Domain
Name Comment Datatype Null Option Is PK
CONDITION_ID A unique, system-generated key thatidentifies a term and condition recordin the system.
BIGINT Not Null Yes
Chapter 1. Tables 183
Name Comment Datatype Null Option Is PK
CONDITION_OWNER_TP_CD
Identifies the owner of the term andcondition. The Condition Attributeentity is common to both Accountand Product Domain. The value isfrom the code tableCDCONDITIONOWNERTP.
BIGINT Not Null No
CONDITION_USAGE_TP_CD
This value, pulled from theCDCONDITIONUSAGETP table,identifies the term and conditionusage type that describes the purposeof the term and condition.
BIGINT Not Null No
NAME The name of the term and condition. VARCHAR(120) Null No
DESCRIPTION The description for the term andcondition.
VARCHAR(3000) Null No
FROM_DATE The date from which a term andcondition is valid.
TIMESTAMP Not Null No
TO_DATE The date till which a term andcondition is valid.
TIMESTAMP Null No
OVERRIDES_CONDITION_ID
The term and condition ID that isoverridden by this term andcondition.
BIGINT Null No
OVERRIDABLE_IND A flag that indicates if the term andcondition can be overridden.
CHAR(1) Null No
MANDATORY_IND A flag that indicates if the term andcondition is mandatory.
CHAR(1) Null No
PARENT_CONDITION_ID
The term and condition that is theparent of this term and condition. It isused in hierarchical and nested termsand conditions.
BIGINT Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
OVERRIDE_RULE_ID An associated rule ID if it is differentfrom the one set inCDCONDITIONUSAGETP.
VARCHAR(10) Null No
184 InfoSphere MDM 11.0: MDM Physical Data Dictionary
TERMCONDITIONNLSThe TERMCONDITIONNLS table is the localization table for theTERMCONDITION table, containing anylocalization data for fields that must be belocalized.
This table is used by the following domains.v Account Domainv Product Domain
Name Comment Datatype Null Option Is PK
CONDITION_NLS_ID A unique, system-generated key thatidentifies a localized term andcondition in the system.
BIGINT Not Null Yes
CONDITION_ID The condition ID of the term andcondition record for whichlocalization data is added.
BIGINT Not Null No
LANG_TP_CD The language code on which data islocalized.
BIGINT Not Null No
NAME The localized value of the name fieldof the term and condition.
VARCHAR(120) Null No
DESCRIPTION The localized value of the descriptionfield of the term and condition.
VARCHAR(3000) Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
USERTABLEA type of PERSON that is allowed to use the application. The specificfunctions/data that they can use within the application are determined by the role(CODE USER ROLE) that they are assigned to.
Name Comment Datatype Null Option Is PK
CONT_ID A unique, system-generated key thatidentifies a party in the system.
BIGINT Not Null Yes
USER_ROLE_TP_CD The type code identifying the userrole.
BIGINT Null No
USER_ID The unique user ID to identify thesystem user.
VARCHAR(30) Not Null No
Chapter 1. Tables 185
Name Comment Datatype Null Option Is PK
PASSWORD The password used by the user toauthenticate against the system.
VARCHAR(20) Null No
EXPIRY_DT The date that the user is no longervalid.
TIMESTAMP Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
VEHICLEThe VEHICLE table contains all HOLDING records that are vehicles. For example,Mazda M3, Subaru Outback, or Honda Civic.
This table is used by the following domains.v Account Domainv Party Domain
Name Comment Datatype Null Option Is PK
HOLDING_ID A unique, system-generated key thatidentifies a party holding in thesystem.
BIGINT Not Null Yes
VIN_NUM The unique 17-digit vehicleidentification number.
VARCHAR(20) Null No
VEHICLE_MAKE The manufacturer name of thevehicle.
VARCHAR(20) Null No
VEHICLE_MODEL The vehicle model as identified by themanufacturer.
VARCHAR(20) Null No
VEHICLE_YEAR The year the vehicle was built. BIGINT Null No
LAST_UPDATE_DT When a record is added or updated,this field is updated with the dateand time. On subsequent updates, thesystem uses this information toensure that the update requestincludes a matching date and time onthis field; if it does not, the updatefails.
TIMESTAMP Not Null No
LAST_UPDATE_USER The ID of the user who last updatedthe data.
VARCHAR(20) Null No
LAST_UPDATE_TX_ID A unique, system-generated key thatidentifies the specific transactionwithin the log system that eithercreated, updated, or deleted the datarow.
BIGINT Null No
186 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Chapter 2. Tables by Features
This section lists the domains in InfoSphere MDM and the database tables that areused by each of the domains.
Account DomainThe Account Domain uses the following tables:v ADDRESSv AGREEMENTSPECVALv BILLINGSUMMARYv CDAGREEMENTSTTPv CDAGREEMENTTPv CDPRODCONTRACTRELTPv CDREPOSITORYTPv CDSERVICELEVELTPv CDTERMINATIONREASONTPv CLAIMCONTRACTv CLAIMv CLAIMROLEv CONDITIONATTRIBUTEv CONTACTv CONTRACTCOMPONENTv CONTRACTCOMPVALv CONTRACTv CONTRACTRELv CONTRACTROLEv CONTRACTROLERELv ENTITYCONDITIONRELv ENTITYCONTENTREFERENCEv HOLDINGv IDENTIFIERv LOBRELv LOCATIONGROUPv NATIVEKEYv PRODUCTCONTRACTRELv PRODUCTv PROPERTYv ROLEIDENTIFIERv ROLELOCATIONv ROLELOCPURPOSEv ROLESITUATIONv TERMCONDITIONNLSv TERMCONDITION
© Copyright IBM Corp. 1996, 2013 187
v VEHICLE
Party DomainThe Party Domain uses the following tables:v ACCESSDATEVALv ADDACTIONTYPEv ADDRESSGROUPv ADDRESSv BANKACCOUNTv BILLINGSUMMARYv CAMPAIGNASSOCIATv CAMPAIGNv CDACCETOCOMPTPv CDACCOUNTTPv CDACTIONADJREASTPv CDADDRUSAGETPv CDADMINFLDNMTPv CDADMINSYSTPv CDAGEVERDOCTPv CDARRANGEMENTTPv CDBILLINGSTTPv CDBILLTPv CDBUYSELLAGREETPv CDCAMPAIGNTPv CDCDCREJREASONTPv CDCDCSTTPv CDCHARGECARDTPv CDCLAIMROLETPv CDCLAIMSTATUSTPv CDCLAIMTPv CDCLIENTIMPTPv CDCLIENTPOTENTPv CDCLIENTSTTPv CDCONTMETHCATv CDCONTMETHTPv CDCONTRACTRELSTTPv CDCONTRACTRELTPv CDCONTRACTROLETPv CDCONTRACTSTTPv CDCONTRCOMPTPv CDCOUNTRYTPv CDCURRENCYTPv CDDEMOGRAPHICSTPv CDDOMAINTPv CDDOMAINVALUETP
188 InfoSphere MDM 11.0: MDM Physical Data Dictionary
v CDEMEMATCHFUNCTIONTPv CDEMEMATCHWORDTPv CDENDREASONTPv CDENTITYLINKSTTPv CDFREQMODETPv CDGENERATIONTPv CDHIGHESTEDUTPv CDHOLDINGTPv CDIDSTATUSTPv CDIDTPv CDINACTREASONTPv CDINCOMESRCTPv CDINDUSTRYTPv CDLANGTPv CDLINKREASONTPv CDLOBRELTPv CDLOBTPv CDMARITALSTTPv CDMATCHENGINETPv CDMATCHRELEVTPv CDMETHODSTATUSTPv CDMISCVALUEATTRTPv CDMISCVALUECATv CDMISCVALUETPv CDNAMEUSAGETPv CDORGNAMETPv CDORGTPv CDPAYMENTMETHODTPv CDPPREFACTIONTPv CDPPREFCATv CDPPREFREASONTPv CDPPREFSEGTPv CDPPREFTPv CDPREFIXNAMETPv CDPRIORITYCATTPv CDPRIORITYTPv CDPRODRELTPv CDPRODTPv CDPROVSTATETPv CDPURPOSETPv CDRELASSIGNTPv CDRELTPv CDRESIDENCETPv CDROLECATTPv CDROLETP
Chapter 2. Tables by Features 189
v CDRPTINGFREQTPv CDSHAREDISTTPv CDSOURCEIDENTTPv CDSUSPECTREASONTPv CDSUSPECTSOURCETPv CDSUSPECTSTATUSTPv CDSUSPECTTPv CDUNDELREASONTPv CHARGECARDv CLAIMCONTRACTv CLAIMv CLAIMROLEv CONTACTCDCv CONTACTDEMOGRAPHICSv CONTACTMETHODGROUPv CONTACTMETHODv CONTACTv CONTACTRELv CONTEQUIVv CONTMACROROLEv CONTRACTCOMPONENTv CONTRACTCOMPVALv CONTRACTv CONTRACTRELv CONTRACTROLEv CONTRACTROLERELv CONTSUMMARYv DEFAULTSOURCEVALv EME_RECBKTDv EME_RECCHKDv EME_RECCMPDv EME_RECHEADv ENTITYROLEv HOLDINGv IDENTIFIERv INACTIVATEDCONTv INACTIVECONTLINKv INCOMESOURCEv LOBRELv LOCATIONGROUPv MACROROLEASSOCv MISCVALUEv NATIVEKEYv ORGNAMEv ORG
190 InfoSphere MDM 11.0: MDM Physical Data Dictionary
v PAYMENTSOURCEv PAYROLLDEDUCTIONv PERSONNAMEv PERSONv PERSONSEARCHv PHONENUMBERv PPREFACTIONOPTv PPREFDEFv PPREFDEFRELv PPREFENTITYv PPREFINSTANCEv PRIVPREFv PRODTPRELv PROPERTYv ROLEIDENTIFIERv ROLELOCATIONv ROLELOCPURPOSEv ROLESITUATIONv SEARCHEXCLRULEv SUSPECTAUGMENTv SUSPECTv VEHICLE
Product DomainThe Product Domain uses the following tables:v CATEGORYNLSv CATEGORYv CATEQUIVv CATHIERARCHYNLSv CATHIERARCHYv CATNODERELv CDACCOUNTREQUIREDTPv CDAVAILABILITYTPv CDCONDITIONATTRIBUTETPv CDCONDITIONOWNERTPv CDCONDITIONUSAGETPv CDCURRENCYTPv CDLINKREASONTPv CDMETADATAINFOTPv CDMETADATAPACKAGETPv CDNODETPv CDPRIMARYTARGETMARKETTPv CDPRODRELATIONTPv CDPRODSTRUCTURETPv CDPRODUCTIDENTIFIERTP
Chapter 2. Tables by Features 191
v CDPRODUCTPARTYROLETPv CDPRODUCTSTATUSTPv CDREPOSITORYTPv CDRESOLUTIONTPv CDSPECCASCADETPv CDSPECUSETPv CDSTATUSREASONTPv CDTAXPOSITIONTPv CONDITIONATTRIBUTEv ENTITYCONDITIONRELv ENTITYCONTENTREFERENCEv ENTITYSPECUSEv FINANCIALPRODUCTv GOODSPRODUCTv INACTIVEPRODLINKv INSURANCEPRODUCTv PRODUCTCATEGORYASSOCv PRODUCTEQUIVv PRODUCTIDENTIFIERv PRODUCTMATCHRESULTv PRODUCTNLSv PRODUCTPARTYROLEv PRODUCTv PRODUCTRELv PRODUCTSUSPECTv PRODUCTTYPENLSv PRODUCTTYPEv PRODUCTVALINDEXv PRODUCTVALNLSINDEXv PRODUCTVALNLSv PRODUCTVALv SERVICEPRODUCTv SPECFMTv SPECFORMATTRANSLATIONv SPECv SPECSRCHATTRv TERMCONDITIONNLSv TERMCONDITION
192 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Notices
This information was developed for products and services offered in the U.S.A.and Canada.
IBM® may not offer the products, services, or features discussed in this documentin other countries. Consult your local IBM representative for information on theproducts and services currently available in your area. Any reference to an IBMproduct, program, or service is not intended to state or imply that only that IBMproduct, program, or service may be used. Any functionally equivalent product,program, or service that does not infringe any IBM intellectual property right maybe used instead. However, it is the user's responsibility to evaluate and verify theoperation of any non-IBM product, program, or service.
IBM may have patents or pending patent applications covering subject matterdescribed in this document. The furnishing of this document does not give youany license to these patents. You can send license inquiries, in writing, to:
IBM Director of LicensingIBM CorporationNorth Castle DriveArmonk, NY 10504-1785U.S.A.
For license inquiries regarding double-byte (DBCS) information, contact the IBMIntellectual Property Department in your country/region or send inquiries, inwriting, to:
Intellectual Property LicensingLegal and Intellectual Property LawIBM Japan Ltd.1623-14, Shimotsuruma, Yamato-shiKanagawa 242-8502 Japan
The following paragraph does not apply to the United Kingdom or any othercountry/region where such provisions are inconsistent with local law:INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THISPUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHEREXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIEDWARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESSFOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express orimplied warranties in certain transactions; therefore, this statement may not applyto you.
This information could include technical inaccuracies or typographical errors.Changes are periodically made to the information herein; these changes will beincorporated in new editions of the publication. IBM may make improvementsand/or changes in the product(s) and/or the program(s) described in thispublication at any time without notice.
This document may provide links or references to non-IBM Web sites andresources. IBM makes no representations, warranties, or other commitmentswhatsoever about any non-IBM Web sites or third-party resources that may be
© Copyright IBM Corp. 1996, 2013 193
referenced, accessible from, or linked from this document. A link to a non-IBMWeb site does not mean that IBM endorses the content or use of such Web site orits owner. In addition, IBM is not a party to or responsible for any transactions youmay enter into with third parties, even if you learn of such parties (or use a link tosuch parties) from an IBM site. Accordingly, you acknowledge and agree that IBMis not responsible for the availability of such external sites or resources, and is notresponsible or liable for any content, services, products, or other materials on oravailable from those sites or resources. Any software provided by third parties issubject to the terms and conditions of the license that accompanies that software.
IBM may use or distribute any of the information you supply in any way itbelieves appropriate without incurring any obligation to you.
Licensees of this program who wish to have information about it for the purposeof enabling: (i) the exchange of information between independently createdprograms and other programs (including this one) and (ii) the mutual use of theinformation that has been exchanged, should contact:
IBM Canada LimitedOffice of the Lab Director8200 Warden AvenueMarkham, OntarioL6G 1C7CANADA
Such information may be available, subject to appropriate terms and conditions,including in some cases payment of a fee.
The licensed program described in this document and all licensed materialavailable for it are provided by IBM under terms of the IBM Customer Agreement,IBM International Program License Agreement, or any equivalent agreementbetween us.
Any performance data contained herein was determined in a controlledenvironment. Therefore, the results obtained in other operating environments mayvary significantly. Some measurements may have been made on development-levelsystems, and there is no guarantee that these measurements will be the same ongenerally available systems. Furthermore, some measurements may have beenestimated through extrapolation. Actual results may vary. Users of this documentshould verify the applicable data for their specific environment.
Information concerning non-IBM products was obtained from the suppliers ofthose products, their published announcements, or other publicly available sources.IBM has not tested those products and cannot confirm the accuracy ofperformance, compatibility, or any other claims related to non-IBM products.Questions on the capabilities of non-IBM products should be addressed to thesuppliers of those products.
All statements regarding IBM's future direction or intent are subject to change orwithdrawal without notice, and represent goals and objectives only.
This information may contain examples of data and reports used in daily businessoperations. To illustrate them as completely as possible, the examples include thenames of individuals, companies, brands, and products. All of these names arefictitious, and any similarity to the names and addresses used by an actualbusiness enterprise is entirely coincidental.
194 InfoSphere MDM 11.0: MDM Physical Data Dictionary
COPYRIGHT LICENSE:
This information may contain sample application programs, in source language,which illustrate programming techniques on various operating platforms. You maycopy, modify, and distribute these sample programs in any form without paymentto IBM for the purposes of developing, using, marketing, or distributingapplication programs conforming to the application programming interface for theoperating platform for which the sample programs are written. These exampleshave not been thoroughly tested under all conditions. IBM, therefore, cannotguarantee or imply reliability, serviceability, or function of these programs.
Each copy or any portion of these sample programs or any derivative work mustinclude a copyright notice as follows:
© (your company name) (year). Portions of this code are derived from IBM Corp.Sample Programs. © Copyright IBM Corp. _enter the year or years_. All rightsreserved.
Notices 195
196 InfoSphere MDM 11.0: MDM Physical Data Dictionary
Trademarks
Company, product, or service names identified in the documents of the text maybe trademarks or service marks of International Business Machines Corporation orother companies. Information on the trademarks of IBM Corporation in the UnitedStates, other countries, or both is located at http://www.ibm.com/legal/copytrade.shtml.
Java and all Java-based trademarks and logos are trademarks or registeredtrademarks of Oracle and/or its affiliates.
Windows is a trademark of Microsoft Corporation in the United States, othercountries, or both.
Linux is a trademark of Linus Torvalds in the United States, other countries, orboth.
UNIX is a registered trademark of The Open Group in the United States and othercountries.
Other company, product, or service names may be trademarks or service marks ofothers.
© Copyright IBM Corp. 1996, 2013 197
198 InfoSphere MDM 11.0: MDM Physical Data Dictionary
����
Printed in USA
GI13-2668-00