www.simulations-plus.com Simulations Plus, Inc. (888) 266 - 9294
rev. 071713
Pag
e1
Pag
e1
Installation Instructions for the Flexera License Server - LMAdmin
Before you begin
In order to install the Flexera License Server, you must have Administrative privileges. Flexera License
Server Manager requires that Java 6 or higher is installed prior to installing the Flexera License Server.
During the Flexera License Server installation process, a file named SLP_HOSTID_Info.txt will be created on your desktop. This file will need to be emailed to [email protected] to provide information required to create your evaluation license. Once you have received your license file from Simulations Plus, you will need to import this license file into the Flexera License Server.
Installation
If you were provided with an individual download, the downloaded file will be a compressed zip file.
Extract this file to a convenient location such as your desktop. The files created from extracting the
downloaded file should look similar to the example below.
To begin the Advanced installation, double
click on the “advanced.exe” file.
Select Flexera LMADMIN Server to begin the Flexera
License Server installation.
www.simulations-plus.com Simulations Plus, Inc. (888) 266 - 9294
rev. 071713
Pag
e2
Pag
e2
First, the installation Introduction
screen will be displayed.
Click “Next” to continue.
Now you will be presented with an
option to select the installation folder.
Unless there is a specific need to
change the location, the default
location is recommended.
Click “Next.”
If needed, you can import existing
licensing data. This can usually be
skipped
For evaluations, leave the default
settings and click “Next”.
The installer has the information
needed to begin installing files.
Click the “Install” button to continue.
www.simulations-plus.com Simulations Plus, Inc. (888) 266 - 9294
rev. 071713
Pag
e3
Pag
e3
If a required C++ component is not
installed on your system, you will have the
opportunity to install it now.
Check the option “Install Visual C++ SP1
Redistributable Package”.
Click “Next”.
The Visual C++ SP1 Redistributable installer
will launch. Click on “Yes” to accept and
install.
The HTTP Port configuration options will
now appear. Set the HTTP and License
Server port numbers you plan to use.
These ports will need to be configured
on your network to allow access by the
intended users.
Click “Next”.
Now the Server Configuration options
will be displayed. The name delay
defaults are usually appropriate.
Check the “Runs as a service” option.
Click “Next”.
www.simulations-plus.com Simulations Plus, Inc. (888) 266 - 9294
rev. 071713
Pag
e4
Pag
e4
Check the “Start server now” option and
click “Next”.
The installer will attempt to start the
licensing server.
When the server starts, a browser window
will open. You should see “FlexNet
Publisher” in the top left corner.
If a browser window did not open, the
server may need to be started manually. A
one-time reboot of your system after
completing the installation will usually solve
this. The server will start each time your
machine boots up.
Click on “Done” to complete the license
server install.
The Flexera License Server is now
installed.
The next step is to install the daemon
required to license Simulations Plus, Inc.
software.
www.simulations-plus.com Simulations Plus, Inc. (888) 266 - 9294
rev. 071713
Pag
e5
Pag
e5
In the directory the installation files
were extracted to, open the folder
labeled Vendor Daemon. There you
will find the proprietary Simulations
Plus daemon.
Copy simplus.exe using CTRL+C or right
click on the file, and choose Copy.
Paste simplus.exe into the LMADMIN
License Server installation directory.
32-bit default directory:
C:\Program Files\FlexNet Publisher
License Server Manager\
64-bit default directory:
C:\Program Files (x86)\ FlexNet
Publisher License Server Manager\
The Flexera License Server is now installed. In order to use this server to license Simulations Plus, Inc.
software products, we must obtain the HostID for the license server. The required steps are on the
following page.
www.simulations-plus.com Simulations Plus, Inc. (888) 266 - 9294
rev. 071713
Pag
e6
Pag
e6
In the directory the installation files were extracted to,
open the folder labeled with the name of the Simulations
Plus, Inc. software title. (This example uses ADMET
Predictor. The folder would be named GastroPlus if the
GastroPlus package was used. The folder would be
named MedChem Studio if the MedChem Studio package
was used.)
Locate and open the HostID Utility folder
Locate the HOSTID_Gatherer.exe program. Double click
to run this program. This utility will create the
SLP_HostID file needed to create your license file.
A message box should be displayed confirming the
successful creation of the SLP_HostID file on your
desktop.
Please email the “SLP_HOSTID_Info.txt” file to:
If you need any further assistance, please feel free to contact us at (800) 266-9294 or