![Page 1: Installing a single Dreamscreen Set unit in place and attach with 2 ½ “ screw. Do not tighten the screw yet, tighten just enough to keep from falling](https://reader035.vdocument.in/reader035/viewer/2022062323/5697bfef1a28abf838cb9f22/html5/thumbnails/1.jpg)
![Page 2: Installing a single Dreamscreen Set unit in place and attach with 2 ½ “ screw. Do not tighten the screw yet, tighten just enough to keep from falling](https://reader035.vdocument.in/reader035/viewer/2022062323/5697bfef1a28abf838cb9f22/html5/thumbnails/2.jpg)
Installing a single Dreamscreen
![Page 3: Installing a single Dreamscreen Set unit in place and attach with 2 ½ “ screw. Do not tighten the screw yet, tighten just enough to keep from falling](https://reader035.vdocument.in/reader035/viewer/2022062323/5697bfef1a28abf838cb9f22/html5/thumbnails/3.jpg)
Set unit in place and attach with 2 ½ “ screw.
Do not tighten the screw yet, tighten just enough to keep from falling.
![Page 4: Installing a single Dreamscreen Set unit in place and attach with 2 ½ “ screw. Do not tighten the screw yet, tighten just enough to keep from falling](https://reader035.vdocument.in/reader035/viewer/2022062323/5697bfef1a28abf838cb9f22/html5/thumbnails/4.jpg)
Insert silver track clip into the jamb. It fits between the magnet and the jamb.
Put one at each end.
![Page 5: Installing a single Dreamscreen Set unit in place and attach with 2 ½ “ screw. Do not tighten the screw yet, tighten just enough to keep from falling](https://reader035.vdocument.in/reader035/viewer/2022062323/5697bfef1a28abf838cb9f22/html5/thumbnails/5.jpg)
Stand the jamb upright on opposite side, attach with one screw.
• There are 5 screw holes in the jamb.
Put a screw in the middle hole only to start. This way if you have to move the jamb, you only have to patch one hole.
![Page 6: Installing a single Dreamscreen Set unit in place and attach with 2 ½ “ screw. Do not tighten the screw yet, tighten just enough to keep from falling](https://reader035.vdocument.in/reader035/viewer/2022062323/5697bfef1a28abf838cb9f22/html5/thumbnails/6.jpg)
Measure from the housing to the jamb
Jamb
Housing
![Page 7: Installing a single Dreamscreen Set unit in place and attach with 2 ½ “ screw. Do not tighten the screw yet, tighten just enough to keep from falling](https://reader035.vdocument.in/reader035/viewer/2022062323/5697bfef1a28abf838cb9f22/html5/thumbnails/7.jpg)
Make sure the measurement is the same top and bottom
Jamb
Housing
Add 1/8” to this measurement
![Page 8: Installing a single Dreamscreen Set unit in place and attach with 2 ½ “ screw. Do not tighten the screw yet, tighten just enough to keep from falling](https://reader035.vdocument.in/reader035/viewer/2022062323/5697bfef1a28abf838cb9f22/html5/thumbnails/8.jpg)
Magnet is recessed 1/8”
![Page 9: Installing a single Dreamscreen Set unit in place and attach with 2 ½ “ screw. Do not tighten the screw yet, tighten just enough to keep from falling](https://reader035.vdocument.in/reader035/viewer/2022062323/5697bfef1a28abf838cb9f22/html5/thumbnails/9.jpg)
Prepare your tracks
Notice the stickers
![Page 10: Installing a single Dreamscreen Set unit in place and attach with 2 ½ “ screw. Do not tighten the screw yet, tighten just enough to keep from falling](https://reader035.vdocument.in/reader035/viewer/2022062323/5697bfef1a28abf838cb9f22/html5/thumbnails/10.jpg)
Prepare your tracks
Notice the stickers
![Page 11: Installing a single Dreamscreen Set unit in place and attach with 2 ½ “ screw. Do not tighten the screw yet, tighten just enough to keep from falling](https://reader035.vdocument.in/reader035/viewer/2022062323/5697bfef1a28abf838cb9f22/html5/thumbnails/11.jpg)
Line up the ‘do not cut’ ends
![Page 12: Installing a single Dreamscreen Set unit in place and attach with 2 ½ “ screw. Do not tighten the screw yet, tighten just enough to keep from falling](https://reader035.vdocument.in/reader035/viewer/2022062323/5697bfef1a28abf838cb9f22/html5/thumbnails/12.jpg)
Measure and Mark
![Page 13: Installing a single Dreamscreen Set unit in place and attach with 2 ½ “ screw. Do not tighten the screw yet, tighten just enough to keep from falling](https://reader035.vdocument.in/reader035/viewer/2022062323/5697bfef1a28abf838cb9f22/html5/thumbnails/13.jpg)
Make the cut
Cut both tracks together to make them the same size
![Page 14: Installing a single Dreamscreen Set unit in place and attach with 2 ½ “ screw. Do not tighten the screw yet, tighten just enough to keep from falling](https://reader035.vdocument.in/reader035/viewer/2022062323/5697bfef1a28abf838cb9f22/html5/thumbnails/14.jpg)
Slide top track through end cap
![Page 15: Installing a single Dreamscreen Set unit in place and attach with 2 ½ “ screw. Do not tighten the screw yet, tighten just enough to keep from falling](https://reader035.vdocument.in/reader035/viewer/2022062323/5697bfef1a28abf838cb9f22/html5/thumbnails/15.jpg)
Through the cap, onto the clip
![Page 16: Installing a single Dreamscreen Set unit in place and attach with 2 ½ “ screw. Do not tighten the screw yet, tighten just enough to keep from falling](https://reader035.vdocument.in/reader035/viewer/2022062323/5697bfef1a28abf838cb9f22/html5/thumbnails/16.jpg)
Snug against housing
![Page 17: Installing a single Dreamscreen Set unit in place and attach with 2 ½ “ screw. Do not tighten the screw yet, tighten just enough to keep from falling](https://reader035.vdocument.in/reader035/viewer/2022062323/5697bfef1a28abf838cb9f22/html5/thumbnails/17.jpg)
Fit onto clip on the jamb side
You may need to remove that single screw for this.
![Page 18: Installing a single Dreamscreen Set unit in place and attach with 2 ½ “ screw. Do not tighten the screw yet, tighten just enough to keep from falling](https://reader035.vdocument.in/reader035/viewer/2022062323/5697bfef1a28abf838cb9f22/html5/thumbnails/18.jpg)
Make sure track reaches magnet
![Page 19: Installing a single Dreamscreen Set unit in place and attach with 2 ½ “ screw. Do not tighten the screw yet, tighten just enough to keep from falling](https://reader035.vdocument.in/reader035/viewer/2022062323/5697bfef1a28abf838cb9f22/html5/thumbnails/19.jpg)
Repeat on the bottom
![Page 20: Installing a single Dreamscreen Set unit in place and attach with 2 ½ “ screw. Do not tighten the screw yet, tighten just enough to keep from falling](https://reader035.vdocument.in/reader035/viewer/2022062323/5697bfef1a28abf838cb9f22/html5/thumbnails/20.jpg)
Flush to the housing
Bottom screw, not yet tight
![Page 21: Installing a single Dreamscreen Set unit in place and attach with 2 ½ “ screw. Do not tighten the screw yet, tighten just enough to keep from falling](https://reader035.vdocument.in/reader035/viewer/2022062323/5697bfef1a28abf838cb9f22/html5/thumbnails/21.jpg)
Fit jamb side same as the topmake sure track reaches magnet
![Page 22: Installing a single Dreamscreen Set unit in place and attach with 2 ½ “ screw. Do not tighten the screw yet, tighten just enough to keep from falling](https://reader035.vdocument.in/reader035/viewer/2022062323/5697bfef1a28abf838cb9f22/html5/thumbnails/22.jpg)
Make sure unit is square!Make adjustment if necessary
Once it’s squared, tighten bottom and top screw.
![Page 23: Installing a single Dreamscreen Set unit in place and attach with 2 ½ “ screw. Do not tighten the screw yet, tighten just enough to keep from falling](https://reader035.vdocument.in/reader035/viewer/2022062323/5697bfef1a28abf838cb9f22/html5/thumbnails/23.jpg)
Add screws to the jamb
![Page 24: Installing a single Dreamscreen Set unit in place and attach with 2 ½ “ screw. Do not tighten the screw yet, tighten just enough to keep from falling](https://reader035.vdocument.in/reader035/viewer/2022062323/5697bfef1a28abf838cb9f22/html5/thumbnails/24.jpg)
Lubricate the trackssimply spray where the plastic meets the metal
Use pure clear silicone spray…..never use WD-40
![Page 25: Installing a single Dreamscreen Set unit in place and attach with 2 ½ “ screw. Do not tighten the screw yet, tighten just enough to keep from falling](https://reader035.vdocument.in/reader035/viewer/2022062323/5697bfef1a28abf838cb9f22/html5/thumbnails/25.jpg)
Cycle the door once or twice
![Page 26: Installing a single Dreamscreen Set unit in place and attach with 2 ½ “ screw. Do not tighten the screw yet, tighten just enough to keep from falling](https://reader035.vdocument.in/reader035/viewer/2022062323/5697bfef1a28abf838cb9f22/html5/thumbnails/26.jpg)
•That’s it! You have installed a Dreamscreen!