Download - INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:[email protected]
![Page 1: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/1.jpg)
INTEGRATED CIRCUITS(EEC-501)
UNIT-2
FILTERS (ACTIVE)
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 2: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/2.jpg)
Filters
A filter is a system that processes a signal in some desired fashion.• A continuous-time signal or continuous signal of
x(t) is a function of the continuous variable t. A continuous-time signal is often called an analog signal.
• A discrete-time signal or discrete signal x(kT) is defined only at discrete instances t=kT, where k is an integer and T is the uniform spacing or period between samples
By: Mr. RAJAN VERMA Email:[email protected]: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 3: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/3.jpg)
Types of Filters
There are two broad categories of filters:• An analog filter processes continuous-time signals• A digital filter processes discrete-time signals.
The analog or digital filters can be subdivided into four categories:• Lowpass Filters• Highpass Filters• Bandstop Filters• Bandpass Filters
By: Mr. RAJAN VERMA Email:[email protected]: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 4: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/4.jpg)
Analog Filter Responses
H(f)
ffc
0
H(f)
ffc
0
Ideal “brick wall” filter Practical filter
By: Mr. RAJAN VERMA Email:[email protected]: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 5: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/5.jpg)
Ideal Filters
Passband Stopband Stopband Passband
Passband PassbandStopband
Lowpass Filter Highpass Filter
Bandstop Filter
PassbandStopband Stopband
Bandpass Filter
M(w)
M(w)
w w
w w
w c w c
w c1w c1
w c2w c2
By: Mr. RAJAN VERMA Email:[email protected]: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 6: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/6.jpg)
There are a number of ways to build filters and of these passive and active filters are the most commonly used in voice and data communications.
By: Mr. RAJAN VERMA Email:[email protected]: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 7: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/7.jpg)
Passive filters
Passive filters use resistors, capacitors, and inductors (RLC networks).
To minimize distortion in the filter characteristic, it is desirable to use inductors with high quality factors (remember the model of a practical inductor includes a series resistance), however these are difficult to implement at frequencies below 1 kHz.• They are particularly non-ideal (lossy)• They are bulky and expensive
By: Mr. RAJAN VERMA Email:[email protected]: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 8: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/8.jpg)
Active filters overcome these drawbacks and are realized using resistors, capacitors, and active devices (usually op-amps) which can all be integrated:• Active filters replace inductors using op-amp
based equivalent circuits.
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 9: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/9.jpg)
Op Amp Advantages
Advantages of active RC filters include:• reduced size and weight, and therefore parasitics• increased reliability and improved performance• simpler design than for passive filters and can realize
a wider range of functions as well as providing voltage gain
• in large quantities, the cost of an IC is less than its passive counterpart
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 10: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/10.jpg)
Op Amp Disadvantages Active RC filters also have some disadvantages:
• limited bandwidth of active devices limits the highest attainable pole frequency and therefore applications above 100 kHz (passive RLCfilters can be used up to 500 MHz)
• the achievable quality factor is also limited• require power supplies (unlike passive filters)• increased sensitivity to variations in circuit parameters
caused by environmental changes compared to passive filters
For many applications, particularly in voice and data communications, the economic and performance advantages of active RC filters far outweigh their disadvantages.
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 11: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/11.jpg)
Bode Plots
Bode plots are important when considering the frequency response characteristics of amplifiers. They plot the magnitude or phase of a transfer function in dB versus frequency.
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 12: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/12.jpg)
The decibel (dB)
Two levels of power can be compared using aunit of measure called the bel.
The decibel is defined as:
1 bel = 10 decibels (dB)
1
210log
P
PB
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 13: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/13.jpg)
A common dB term is the half power pointwhich is the dB value when the P2 is one-half P1.
1
210log10
P
PdB
dBdB 301.32
1log10 10
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 14: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/14.jpg)
Logarithms
A logarithm is a linear transformation used to simplify mathematical and graphical operations.
A logarithm is a one-to-one correspondence.
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 15: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/15.jpg)
Any number (N) can be represented as a base number (b) raised to a power (x).
The value power (x) can be determined bytaking the logarithm of the number (N) tobase (b).
xbN )(
Nx blogBy: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 16: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/16.jpg)
Although there is no limitation on the numerical value of the base, calculators are designed to handle either base 10 (the common logarithm) or base e (the natural logarithm).
Any base can be found in terms of the common logarithm by:
wq
wq 1010
loglog
1log
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 17: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/17.jpg)
Properties of Logarithms
The common or natural logarithm of the number 1 is 0.
The log of any number less than 1 is a negative number.
The log of the product of two numbers is the sum of the logs of the numbers.
The log of the quotient of two numbers is the log of the numerator minus the denominator.
The log a number taken to a power is equal to the product of the power and the log of the number.
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 18: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/18.jpg)
Poles & Zeros of the transfer function
pole—value of s where the denominator goes to zero.
zero—value of s where the numerator goes to zero.
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 19: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/19.jpg)
Single-Pole Passive Filter
First order low pass filter Cut-off frequency = 1/RC rad/s Problem : Any load (or source)
impedance will change frequency response.
vin voutC
R
RCs
RC
sCR
sCR
sC
ZR
Z
v
v
C
C
in
out
/1
/1
1
1
/1
/1
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 20: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/20.jpg)
Single-Pole Active Filter
Same frequency response as passive filter.
Buffer amplifier does not load RC network.
Output impedance is now zero.
vin vout
C
R
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 21: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/21.jpg)
Low-Pass and High-Pass Designs
High Pass Low Pass
)/1()/1(
11
11
1
RCs
s
RCsRC
sRCsCR
sRCsCR
v
v
in
out
RCs
RC
v
v
in
out
/1
/1
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 22: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/22.jpg)
To understand Bode plots, you need to use Laplace transforms!
The transfer function of the circuit is:
1
1
/1
/1
)(
)(
sRCsCR
sC
sV
sVA
in
ov
R
Vin(s)
www.uptunotes.com
By: Mr. RAJAN VERMA Email:[email protected]
![Page 23: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/23.jpg)
Break Frequencies
Replace s with jw in the transfer function:
where fc is called the break frequency, or corner frequency, and is given by:
b
v
ff
jRCfjRCj
fA
1
1
21
1
1
1)(
RCfc 2
1
www.uptunotes.com
By: Mr. RAJAN VERMA Email:[email protected]
![Page 24: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/24.jpg)
Corner Frequency
The significance of the break frequency is that it represents the frequency where
Av(f) = 0.707-45. This is where the output of the transfer function
has an amplitude 3-dB below the input amplitude, and the output phase is shifted by -45 relative to the input.
Therefore, fc is also known as the 3-dB frequency or the corner frequency.
www.uptunotes.com
By: Mr. RAJAN VERMA Email:[email protected]
![Page 26: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/26.jpg)
Bode plots use a logarithmic scale for frequency.
where a decade is defined as a range of frequencies where the highest and lowest frequencies differ by a factor of 10.
10 20 30 40 50 60 70 80 90 100 200
One decade
www.uptunotes.com
By: Mr. RAJAN VERMA Email:[email protected]
![Page 27: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/27.jpg)
Consider the magnitude of the transfer function:
Expressed in dB, the expression is 2/1
1)(
b
vff
fA
b
bb
bdBv
ff
ffff
fffA
/log20
/1log10/1log20
/1log201log20)(
22
2
www.uptunotes.com
By: Mr. RAJAN VERMA Email:[email protected]
![Page 28: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/28.jpg)
Look how the previous expression changes with frequency:• at low frequencies f<< fb, |Av|dB = 0 dB
• low frequency asymptote
• at high frequencies f>>fb,
|Av(f)|dB = -20log f/ fb
• high frequency asymptote
www.uptunotes.com
By: Mr. RAJAN VERMA Email:[email protected]
![Page 29: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/29.jpg)
Magnitude
20 log P ( )( )
rad
sec
0.1 1 10 10060
40
20
0
arg P ( )( )
deg
rad
sec
0.1 1 10 100100
50
0
Actual response curve
High frequency asymptote
3 dB
Low frequency asymptote
Note that the two asymptotes intersect at fb where
|Av(fb )|dB = -20log f/ fb
www.uptunotes.com
By: Mr. RAJAN VERMA Email:[email protected]
![Page 30: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/30.jpg)
The technique for approximating a filter function based on Bode plots is useful for low order, simple filter designs
More complex filter characteristics are more easily approximated by using some well-described rational functions, the roots of which have already been tabulated and are well-known.
www.uptunotes.com
By: Mr. RAJAN VERMA Email:[email protected]
![Page 31: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/31.jpg)
Real Filters
The approximations to the ideal filter are the:• Butterworth filter• Chebyshev filter• Cauer (Elliptic) filter• Bessel filter
www.uptunotes.com
By: Mr. RAJAN VERMA Email:[email protected]
![Page 32: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/32.jpg)
Standard Transfer Functions Butterworth
• Flat Pass-band.• 20n dB per decade roll-off.
Chebyshev• Pass-band ripple.• Sharper cut-off than Butterworth.
Elliptic• Pass-band and stop-band ripple.• Even sharper cut-off.
Bessel• Linear phase response – i.e. no signal distortion in
pass-band.
www.uptunotes.com
By: Mr. RAJAN VERMA Email:[email protected]
![Page 34: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/34.jpg)
Butterworth Filter
The Butterworth filter magnitude is defined by:
where n is the order of the filter.
2/121
1)()(
njHM
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 35: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/35.jpg)
From the previous slide:
for all values of n
For large w:
1)0( M
2
1)1( M
nM
1
)(
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 36: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/36.jpg)
And
implying the M(w) falls off at 20n db/decade for large valuesof w.
10
101010
log20
log201log20)(log20
n
M n
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 37: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/37.jpg)
T1i
T2i
T3i
wi
1000
0.1 1 100.01
0.1
1
10
20 db/decade
40 db/decade
60 db/decade
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 38: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/38.jpg)
To obtain the transfer function H(s) from the magnitude response, note that
njHjHjHM2
22
1
1)()()()(
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 39: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/39.jpg)
Because s = jw for the frequency response, we have s2 = - w2.
The poles of this function are given by the roots of
nnn sssHsH
22 11
1
1
1)()(
nkes kjnn 2,,2,1,111 )12(2
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 40: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/40.jpg)
The 2n pole are:
sk =e j[(2k-1)/2n] p n even, k = 1,2,...,2n
e j(k/n) p n odd, k = 0,1,2,...,2n-1
Note that for any n, the poles of the normalized Butterworthfilter lie on the unit circle in the s-plane. The left half-planepoles are identified with H(s). The poles associated with H(-s) are mirror images.
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 43: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/43.jpg)
Recall from complex numbers that the rectangular formof a complex can be represented as:
Recalling that the previous equation is a phasor, we canrepresent the previous equation in polar form:
jyxz
sincos jrz where
sincos ryandrx
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 44: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/44.jpg)
Definition: If z = x + jy, we define e z = e x+ jy to be thecomplex number
Note: When z = 0 + jy, we have
which we can represent by symbol:
e j
)sin(cos yjyee xz
)sin(cos yjye jy
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 45: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/45.jpg)
)sin(cos je j
The following equation is known as Euler’s law.
Note that
functionodd
functioneven
sinsin
coscos
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 46: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/46.jpg)
)sin(cos je j
This implies that
This leads to two axioms:
2cos
jj ee
andj
ee jj
2sin
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 47: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/47.jpg)
Observe that e jq represents a unit vector which makes an angle q with the positivie x axis.
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 48: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/48.jpg)
Find the transfer function that corresponds to a third-order (n = 3) Butterworth filter.
Solution:
From the previous discussion:
sk = e jkp/3, k=0,1,2,3,4,5
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 49: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/49.jpg)
Therefore,
3/55
3/44
3
3/22
3/1
00
j
j
j
j
j
j
es
es
es
es
es
es
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 50: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/50.jpg)
p1
1 p6
1
p2
.5 0.8668j p5
.5 0.866j
p3
.5 0.866j p4
.5 0.866j
The roots are:
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 52: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/52.jpg)
Using the left half-plane poles for H(s), we get
H ss s j s j
( )( )( / / )( / / )
1
1 1 2 3 2 1 2 3 2
which can be expanded to:
H ss s s
( )( )( )
1
1 12
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 53: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/53.jpg)
The factored form of the normalized Butterworth polynomials for various order n are tabulated in filter design tables.
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 54: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/54.jpg)
n Denominator of H(s) for Butterworth Filter
1 s + 1
2 s2 + 1.414s + 1
3 (s2 + s + 1)(s + 1)
4 (s2 + 0.765 + 1)(s2 + 1.848s + 1)
5 (s + 1) (s2 + 0.618s + 1)(s2 + 1.618s + 1)
6 (s2 + 0.517s + 1)(s2 + 1.414s + 1 )(s2 + 1.932s + 1)
7 (s + 1)(s2 + 0.445s + 1)(s2 + 1.247s + 1 )(s2 + 1.802s + 1)
8 (s2 + 0.390s + 1)(s2 + 1.111s + 1 )(s2 + 1.663s + 1 )(s2 + 1.962s + 1)
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 56: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/56.jpg)
So far we have looked at the Butterworth filter with a normalized cutoff frequency
c rad1 / sec
By means of a frequency transformation, wecan obtain a lowpass, bandpass, bandstop, or highpass filter with specific cutoff frequencies.
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 57: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/57.jpg)
Lowpass with Cutoff Frequency wu
Transformation:
s sn u /
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 58: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/58.jpg)
Highpass with Cutoff Frequency wl
Transformation:
s sn l /
By: Mr. RAJAN VERMA Email:[email protected]
www.uptunotes.com
![Page 59: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/59.jpg)
Band pass Butterworth FiltersMultistage Wide Band pass
The center frequency fc or fo for the wide band pass filter is defined as,
fc or fo = √ fH fL
fL = 1 / 2π √ RC
fH = 1 / 2π √ R’ C’
and Q (Quality Factor) = fC / (fH - fL)
BW = (fH - fL)
Q = fC / BW
www.uptunotes.com
By: Mr. RAJAN VERMA Email:[email protected]
![Page 60: INTEGRATED CIRCUITS (EEC-501) UNIT-2 FILTERS (ACTIVE) By: Mr. RAJAN VERMA Email:engr.rajan@gmail.com](https://reader038.vdocument.in/reader038/viewer/2022110116/551c23f7550346a34f8b5ced/html5/thumbnails/60.jpg)
Band reject KRC Filters :
• Vo / Vin = HON HN
Where HON = DC gain and HN is given by
HN = 1 – ( ω / ωO )2 / 1 – ( ω / ωO )2 + (j ω / ωO) / Q
• HON = K ωO = 1 / RC and Q = 1 / 4-2k
www.uptunotes.com
By: Mr. RAJAN VERMA Email:[email protected]