®®®®
IIIIInnnnnnttteeeerrrrnnnnnaaaal
100
100
101
102
104
104
104
106
107
107
112
112
115
119
123
126
126
130
Key advantages
AnyOne®
can be enjoyable by anyone...from the beginner to the most experienced implantologist.
The convenience of a single prosthetic connection
Compatibility of connection with many other implant system (11° Internal Hex Connection).
Characteristics & Advantages
Fixture Product
Abutment & Prosthetic Options
Clinical Case
aaal
he ogist.
ection
s
1. Tissue friendly
2. Operator friendly
3. Patient friendly
AnyOne® implant system was developed to be Tissue friendly, Operator friendly, and Patient friendly (T.O.P concept).
Characteristics & Advantages »
AAAAnnnnyyyyyyyyyOOOOOOOOnnnnnnnneeeeeeee® ® ® ® ®
IIIIIInnnnnnnnttttttteeeeeerrrrrrnnnnnnaaaall
3. "Special 7mm" essential for special case
For Irregular Ridge
dimension.
4.5, 5.0, 6.0, 7.0
2. "Deep Thread" for stronger initial fixation
For Soft Bone
4.5, 5.5, 6.5, 7.5, 8.0
1. Easy and convenient "Regular Thread"
3.5, 4.0, 4.5, 5.0, 6.0, 7.0
AnyOne has variety of choice.
Characteristics & Advantages »
Ø3.5
Ø4.0
Ø4.5
Ø5.0
Ø6.0
Ø7.0
Simplified surgical protocol
Stress reduction on crestal bone
Stress distribution on cancellous bone
Diversed prosthetic options provide convenient solutions
The convenience of a single prosthetic connection for
degree internal hex connection
Less stress More stress
Characteristics & Advantages »
AAAAnnnnyyyyyyyyyOOOOOOOOnnnnnnnneeeeeeee® ® ® ® ®
IIIIIInnnnnnnnttttttteeeeeerrrrrrnnnnnnaaaall
under the tissue.
Advantage for Esthetic
Excellent soft tissue response
A
B
C
2. Compressive strength1. Wall thickness
3. Fatigue test
(unit mm)
(unit mm)
Company A
A
A
B
B
C
C
0.201
0.296
0.056
0.173
0.248
0.369
0.341
0.476
0.197
0.321
0.324
0.466
0.323
Lo
ad
(N)
Number of Cycles
0
200
102 104 106103 105 107
400
600
800
1000
1200
1400
1600
1800
Company DAnyOne®
0.431
0.254
0.354
0.415
0.515
Company A
Company B
Company B
AnyOne® Ø3.5
102
Company D
0
40
120
80
160
200
Company O AnyOne®
154
195
System
Fatiguelimit
AnyOne® Ø4.0
AnyOne®
(Ø3.5 XCompany D
(Ø3.6 X L7.0mm)
360.3N 318.2N
360.3N
318.2N
Characteristics & Advantages »
Regular Thread- Cover Screw included
Ø3.5
7.0
8.5
10.0
11.5
13.0
15.0
Ø4.0
7.0
8.5
10.0
11.5
13.0
15.0
Ø4.5
7.0
8.5
10.0
11.5
13.0
15.0
Ø5.0
7.0
8.5
10.0
11.5
13.0
15.0
Ø6.0
7.0
8.5
10.0
11.5
13.0
Ø7.0
7.0
8.5
10.0
11.5
13.0
Ø3.9
Ø4.3
Ø4.8
Ø5.3
Ø6.3
Ø7.3
L
Ø3.5
Ø4.0
Ø4.5
Ø5.0
Ø6.0
Ø7.0
Diameter Ref.C
Fixture Product »
AAAAnnnnyyyyyyyyyOOOOOOOOnnnnnnnneeeeeeee® ® ® ® ®
IIIIIInnnnnnnnttttttteeeeeerrrrrrnnnnnnaaaall
Deep Thread- Cover Screw included
Special Length- Cover Screw included
Ø4.5
7.0
8.5
10.0
11.5
13.0
15.0
Ø5.5
7.0
8.5
10.0
11.5
13.0
15.0
Ø6.5
7.0
8.5
10.0
11.5
13.0
15.0
Ø7.5
7.0
8.5
10.0
11.5
13.0
15.0
Ø8.0
7.0
8.5
10.0
11.5
13.0
Ø4.5
7.0Ø5.0
Ø6.0
Ø7.0
Ø4.8
Ø5.8
Ø6.8
Ø7.8
Ø8.3
Ø4.8 Ø5.3 Ø6.3 Ø7.3
7
L
Ø4.5 Ø5.0 Ø6.0 Ø7.0
Diameter Ref.C
Ref.C
Ø4.5
Ø5.5
Ø6.5
Ø7.5
Ø8.0
Fixture Product »
Cover ScrewUsed for two stage surgical protocol.
Protects the inner portion and platform of the
Uses Hand Driver (1.2 Hex).
Healing Abutment
during healing.
Uses Hand Driver (1.2 Hex).
0.5
Ø4.0
3.0 HA4030
4.0 HA4040
5.0 HA4050
6.0 HA4060
7.0 HA4070
Ø4.5
3.0 HA4530
4.0 HA4540
5.0 HA4550
6.0 HA4560
7.0 HA4570
Ø5.5
3.0 HA5530
4.0 HA5540
5.0 HA5550
6.0 HA5560
7.0 HA5570
Ø6.5
3.0 HA6530
4.0 HA6540
5.0 HA6550
6.0 HA6560
7.0 HA6570
Ø7.5
4.0 HA7540
5.0 HA7550
6.0 HA7560
Ø8.5
4.0 HA8540
5.0 HA8550
6.0 HA8560
Ø9.5
4.0 HA9540
5.0 HA9550
6.0 HA9560
Ref.C
Ref.C
Ø4.0
Ø4.5
Ø5.5
Ø6.5
Ø7.5
Ø8.5
Ø9.5
AAAAnnnnyyyyyyyyyOOOOOOOOnnnnnnnneeeeeeee® ® ® ® ®
IIIIIInnnnnnnnttttttteeeeeerrrrrrnnnnnnaaaall
CCM AbutmentEZ Post Milling Abutment Angled Abutment
Temporary Abutment [Titanium] Temporary Abutment [POM] Fuse Abutment
Lab Analog
Impression Coping[Transfer / 2piece]
Impression Coping[Pick-up / Hexed]
Impression Coping[Transfer / 1piece]
Impression Coping[Pick-up / Non-hexed]
Gold Abutment
Abutment & Prosthetic Options » Fixture Level Prosthesis
EZ Post (Hex)- Abutment Screw(AS20) included
Cement retained restoration
-
ing, to ensure excellent aesthetics under the
tissue. Biological S-line provides a seamless
natural-looking and more functional emer-
Post Height : 4.0, 5.5mm
Cement retained restoration
to ensure excellent aesthetics under the tissue.
Biological S-line provides a seamless natural-
Post Height : 4.0, 5.5mm
Non-Hex Abutments do not provide anti-
rotation and are contra-indicated for single unit
restorations.
Recommend Torque : 35Ncm
Ref.C Thread
Length
Ø4.5
1.5
4.0
2.5
3.5
4.5
5.5
Ø5.5
1.5
2.5
3.5
4.5
5.5
Ø6.5
1.5
2.5
3.5
4.5
5.5
Ø4.5
1.5
5.5
2.5
3.5
4.5
5.5
Ø5.5
1.5
2.5
3.5
4.5
5.5
Ø6.5
1.5
2.5
3.5
4.5
5.5
DiameterPost
Ref.C
Ø4.5
1.5
4.0Non
2.5
3.5
4.5
5.5
Ø5.5
1.5
2.5
3.5
4.5
5.5
Ø6.5
1.5
2.5
3.5
4.5
5.5
Ø4.5
1.5
5.5Non
2.5
3.5
4.5
5.5
Ø5.5
1.5
2.5
3.5
4.5
5.5
Ø6.5
1.5
2.5
3.5
4.5
5.5
DiameterPost
Ref.C
P.D
Platformlevel
Type Type
Abutment & Prosthetic Options » Fixture Level Prosthesis
AAAAnnnnyyyyyyyyyOOOOOOOOnnnnnnnneeeeeeee® ® ® ® ®
IIIIIInnnnnnnnttttttteeeeeerrrrrrnnnnnnaaaall
Fuse Abutment- Abutment Screw(AS20)+Fuse cap included.
For the design concept and rationale
of the Fuse Abutment, please refer to
Page 069.
Ø5.5
Ø5.5
3
5.5
Ø4.5 7 15°
Ø4.5 7 25°
TypeDiameter
Labiolingual
C. P.Ref.C
Labio-lingual
Labio-lingual
distal
distal
Milling Abutment- Abutment Screw(AS20) included
Used for abutment design by customized
milling.
Milling Abutments are treated with a ZrN
coating, to ensure excellent aesthetics
under the tissue.
Available in both hex and Non-Hex, in
four diameters (Ø4.0, Ø4.5, Ø5.5 & Ø6.5)
Recommend Torque : 35Ncm
Angled Abutment- Abutment Screw(AS20) included
- Available in two diameters (Ø4.5 & Ø5.5)
a ZrN coating, to ensure excellent aesthet-
ics under the tissue.
Height of minimized screw head helps to
prevent milling problems.
Recommend Torque : 35Ncm
Ø4.0 1.5
9.0
MA4015HT
Ø4.5 2.0 MA4520HT
Ø5.52.0 MA5520HT
4.0 MA5540HT
Ø6.52.5 MA6525HT
4.0 MA6540HT
Ø4.0 1.5 MA4015NT
Ø4.5 2.0 MA4520NT
Ø5.52.0 MA5520NT
4.0 MA5540NT
Ø6.52.5 MA6525NT
4.0 MA6540NT
Ø4.5
2.5
7.0
15o
AA4215HT
25o
AA4225HT
4.515
o
AA4415HT
25o
AA4425HT
Ø5.5
2.515
o
AA5215HT
25o
AA5225HT
4.515
o
AA5415HT
25o
AA5425HT
Ø4.5
2.515
o
AA4215NT
25o
AA4225NT
4.515
o
AA4415NT
25o
AA4425NT
Ø5.5
2.515
o
AA5215NT
25o
AA5225NT
4.515
o
AA5415NT
25o
AA5425NT
Type
Type Angle
Diameter
Diameter
Post
Post
Ref.C
Ref.C
Ø6.5
Ø6.5
Ø5.5
Ø5.5
Ø4.5
Ø4.5
Ø4.0
Ø4.0
Ø4.5
Ø4.5
Ø5.5
Ø5.5
15o
15o
25o
25o
9.0
7.0
Abutment & Prosthetic Options » Fixture Level Prosthesis
Gold Abutment- Abutment Screw(AS20) included
For fabrication of customized abutment for either
screw or cement retained restorations.
Available in both hex (red) and non-hex (white)
Threaded sleeves allow for better retention of resin
or wax.
Recommend Torque : 30Ncm
CCM Abutment- Abutment Screw(AS20) included
situations.
Can be casted with non-precious alloys (Ni-Cr,
Cr-Co alloys).
Non-precious melting temperature : Depend on
Manufacturer
Threaded sleeves for convenient Resin / Wax-up.
Temporary Abutment (Titanium)
- Abutment Screw(AS20) included
For making provisional restoration.
Available in both hex and non-hex.
Grooved surface on abutment post allows for bet-
ter retention of resin or wax.
Temporary Abutment (POM)
- Abutment Screw(AS20) included
For making chairside provisionals for the aesthetic
zone.
Especially useful for immediate placement after
extraction.
Available in both hex and non-hex.
Lab Analog
Ø4.5 1.0 11.0GA4515HT
GA4515NT
Ø4.5 1.0 11.0
Ø4.5 11.0TA4511HT
TA4511NT
Ø4.5 11.0
Small
Diameter
Diameter
Post
Post
Ref.C
Ref.C
Ref.C
Ref.C
Ref.C
Type
Type
Type
Type
TypeColorType
Diameter
Diameter
Ø4.5
Ø4.5
Ø4.5
Ø4.5
Abutment & Prosthetic Options » Fixture Level Prosthesis
AAAAnnnnyyyyyyyyyOOOOOOOOnnnnnnnneeeeeeee® ® ® ® ®
IIIIIInnnnnnnnttttttteeeeeerrrrrrnnnnnnaaaall
Impression Coping (Transfer type)
- Guide Pin included in two piece type
Diameters correspond to Healing Abutment
diameters.
Available in one piece (non-hex) or two
piece (hex) and two heights.
Used for Closed Tray (Transfer) technique.
Impression Coping design ensures easy
Flat surface of Impression Coping aligns
Transfer Impression Coping Driver and
Hand Driver(1.2Hex) should be used to
ensure Impression Coping is properly
tightened.
Impression Coping (Pick-up type)
- Guide Pin included
Square body design ensures stability within the
Ø4.012.0 IT4012HT IT4012HHT
16.0 IT4016HT IT4016HHT
Ø4.512.0 IT4512HT IT4512HHT
16.0 IT4516HT IT4516HHT
Ø5.512.0 IT5512HT IT5512HHT
16.0 IT5516HT IT5516HHT
Ø6.512.0 IT6512HT IT6512HHT
16.0 IT6516HT IT6516HHT
Ø4.012.0 IT4012N IT4012NH
16.0 IT4016N IT4016NH
Ø4.512.0 IT4512N IT4512NH
16.0 IT4516N IT4516NH
Ø5.512.0 IT5512N IT5512NH
16.0 IT5516N IT5516NH
Ø6.512.0 IT6512N IT6512NH
16.0 IT6516N IT6516NH
Ø4.012.0
16.0
Ø4.57.0
12.0
Ø5.57.0
12.0
Ø6.57.0
12.0
Ø4.012.0
16.0
Ø4.57.0
12.0
Ø5.57.0
12.0
Ø6.57.0
12.0
TypeDiameter
Ref.C Ref.C
Ø4.0
Ø4.0 Ø4.5
Ø4.0
Ø4.0
Ø4.5
Ø5.5 Ø6.5
Ø4.5
Ø5.5 Ø6.5
Ø5.5 Ø6.5
Ø5.5
Ø4.5
Ø6.5
TypeDiameter Ref.C
Abutment & Prosthetic Options » Fixture Level Prosthesis
Transfer Impression
Coping Driver
Refer to Page.188
Burn-out Cylinder
Solid Lab Analog
Snap Impression Coping
Comfort Cap
Solid Abutment EZ Post EZ Post and Solid Abutments
have the same post size
making the Snap Impression
Coping and Analog suitable
for both.
Abutment & Prosthetic Options » Abutment Level Prosthesis
AAAAnnnnyyyyyyyyyOOOOOOOOnnnnnnnneeeeeeee® ® ® ® ®
IIIIIInnnnnnnnttttttteeeeeerrrrrrnnnnnnaaaall
Solid AbutmentCement retained restoration only.
Solid Abutment should be placed into patient’s
mouth before taking impression.
Should be tightened with Solid Driver and Hand Driver.
Recommend Torque : 35Ncm
Post Height : 4.0, 5.5, 7.0mm
Ø4.0
1.5
4.0
2.5
3.5
4.5
5.5
1.5
5.5
2.5
3.5
4.5
5.5
Ø4.5
1.5
4.0
2.5
3.5
4.5
5.5
1.5
5.5
2.5
3.5
4.5
5.5
1.5
7.0
2.5
3.5
4.5
5.5
PostDiameter
Ref.C
Ø5.5
1.5
4.0
2.5
3.5
4.5
5.5
1.5
5.5
2.5
3.5
4.5
5.5
Ø6.5
1.5
4.0
2.5
3.5
4.5
5.5
1.5
5.5
2.5
3.5
4.5
5.5
PostDiameter
Ref.C
P.D
Solid Lab AnalogUsed for Solid Abutment Ø4.0
4.0
5.5
Ø4.5
4.0
5.5
7.0
Ø5.54.0
5.5
Ø6.54.0
5.5
DiameterRef.C
P.D
Abutment & Prosthetic Options » Abutment Level Prosthesis
Comfort CapProtects a Solid Abutment and minimizes irritation
to tongue and oral mucosa.
Easily make a temporary crown by resin build up.
Color coded according to post heights.
[Yellow : P.H 4.0mm, White : P.H 5.5mm, Pink : P.H 7.0mm]
Ø4.04.0
5.5
Ø4.5
4.0
5.5
7.0
Ø5.54.0
5.5
Ø6.54.0
5.5
PostDiameter
Ref.C Ø5.5
P.D
Snap Impression Coping
Used for precise Impression Coping on Solid Abutment.
[Yellow : P.H 4.0mm, White : P.H 5.5mm, Pink : P.H 7.0mm]
Burn-out Cylinder
Lab Analog.
Easy to wax up, provides accurate margins and
clean burnout.
Available both hex (red) and non-hex (white).
Ø4.04.0
5.5
Ø4.5
4.0
5.5
7.0
Ø5.54.0
5.5
Ø6.54.0
5.5
Ø4.0
Ø4.5
Ø5.5
Ø6.5
Ø4.0
Ø4.5
Ø5.5
Ø6.5
PostDiameter
Diameter
Ref.C
Ref.CType
P.D
Ø4.0 Ø4.5 Ø5.0 Ø6.5
Abutment & Prosthetic Options » Abutment Level Prosthesis
AAAAnnnnyyyyyyyyyOOOOOOOOnnnnnnnneeeeeeee® ® ® ® ®
IIIIIInnnnnnnnttttttteeeeeerrrrrrnnnnnnaaaall
Octa Gold Cylinder Octa Plastic Cylinder Octa CCM Cylinder Octa EZ Post Cylinder
Octa Temporary Cylinder
Octa Lab Analog
Octa Impression Coping[Transfer]
Octa Impression Coping[Pick-up]
Octa Abutment Octa Healing Cap
Abutment & Prosthetic Options » Abutment Level Prosthesis
Octa AbutmentUsed to make multiple screw-retained prosthetics.
Recommend Torque : 35Ncm
Octa Impression Coping (Transfer)- Guide Pin included
Should be tightened with Impression Driver
(Page.176)
Special impression coping screw which can be
used with a 1.2mm hex driver is available on
request.
Octa Healing Cap- Cylinder Screw (IRCS200) included
Protects Octa Abutment and minimizes irritation to
tongue and oral mucosa.
Ø3.8
1.5 OA4015
2.5 OA4025
3.5 OA4035
4.5 OA4045
5.5 OA4055
Ø4.8
1.5 OA5015
2.5 OA5025
3.5 OA5035
4.5 OA5045
5.5 OA5055
Ø5.8
1.5 OA6015
2.5 OA6025
3.5 OA6035
4.5 OA6045
5.5 OA6055
Ø4.0
7.5AAOITO4010T
AAOITN4010T
9.5AAOITO4012T
AAOITN4012T
Ø5.0
7.5AAOITO5010T
AAOITN5010T
9.5AAOITO5012T
AAOITN5012T
Ø6.0
7.5AAOITO6010T
AAOITN6010T
9.5AAOITO6012T
AAOITN6012T
Ø4.0
Ø5.0
Ø6.0
Diameter
Diameter
Ref.C
Ref.CType
Ref.C
Ø3.8
Ø4.8
Ø5.8
Ø4.0
Ø5.0
Ø6.0
P.D
2.5
7.5
2.5
9.5
Abutment & Prosthetic Options » Abutment Level Prosthesis
Ø4.8
AAAAnnnnyyyyyyyyyOOOOOOOOnnnnnnnneeeeeeee® ® ® ® ®
IIIIIInnnnnnnnttttttteeeeeerrrrrrnnnnnnaaaall
Octa Impression Coping (Pick-up)- Guide Pin included
Octa Temporary Cylinder- Cylinder Screw (IRCS200) included
Octa EZ Post Cylinder- Cylinder Screw (IRCS200) included
Octa Lab Analog
Ø4.0
10.0
12.0
Ø5.0
10.0
12.0
Ø6.0
10.0
12.0
Ø4.0
Ø5.0
Ø6.0
Ø4.0
5.5
7.0
5.5
7.0
Ø5.0
5.5
7.0
5.5
7.0
Ø6.0
5.5
7.0
5.5
7.0
Post
Diameter
Diameter
Diameter
Ref.C
Ref.C
Ref.C
Type
Type
Type
Ø3.8
Ø4.8 IOA300
Ø5.8
Ref.C
Ø4.0
Ø5.0
Ø6.0
Ø4.0
Ø4.0
5.57
Ø5.0
Ø6.0
Ø5.0 Ø6.0
P.D
1012
Abutment & Prosthetic Options » Abutment Level Prosthesis
Ø4.0
Ø5.0
Ø6.0
Ø4.0
Ø5.0IOGO100T
IOGN100T
Ø6.0
Ø4.0
Ø5.0
Ø6.0
Octa Gold Cylinder- Cylinder Screw (IRCS200) included
For customizing abutment for screw retained
multi-unit restoration.
- Available in both octa(red) and non-octa(white)
Threaded sleeves allow for better retention of resin
or wax.
Available in three diameters (Ø4.0, Ø5.0 & Ø6.0).
Recommend torque : 30Ncm
Octa CCM Cylinder- Cylinder Screw (IRCS200) included
Useful to make a customized abutment in
situations.
Can be casted with non-precious alloys (Ni-Cr,
Cr-Co alloys).
Non-precious melting temperature : Depend on
Manufacturer.
Threaded sleeves for convenient Resin / Wax-up.
Octa Plastic Cylinder- Cylinder Screw (IRCS200) included
Economical option
Used for customizing abutment for screw retained
multi-unit restorations.
- Available in both octa(red) and non-octa(white)
Threaded sleeves allow for better retention of resin or
wax.
Ref.C
Ref.C
Ref.C
Type
Type
Type
Ø4.0
Ø5.0 Ø6.0
10
Ø4.0
Ø4.0
Ø5.0 Ø6.0
Ø5.0 Ø6.0
12
12
Abutment & Prosthetic Options » Abutment Level Prosthesis
AAAAnnnnyyyyyyyyyOOOOOOOOnnnnnnnneeeeeeee® ® ® ® ®
IIIIIInnnnnnnnttttttteeeeeerrrrrrnnnnnnaaaall
Multi-unit EZ Post Cylinder
Multi-unit Temporary Cylinder
Multi-unit Lab Analog
Multi-unit Impression Coping
[Transfer]
Multi-unit Abutment[Straight]
Multi-unit AngledAbutment [17°]
Multi-unit Impression Coping
[Pick-up]
Multi-unit AngledAbutment [29°]
Multi-unit Healing Cap
Multi-unit Glod Cylinder
Multi-unit CCM Cylinder
Multi-unit Plastic Cylinder
Abutment & Prosthetic Options » Abutment Level Prosthesis
1.5 MU5015HT
2.5 MU5025HT
3.5 MU5035HT
4.5 MU5045HT
5.5 MU5055HT
1.5 MU5015NT
2.5 MU5025NT
3.5 MU5035NT
4.5 MU5045NT
5.5 MU5055NT
1.0 MU50129HT
2.0 MU50229HT
3.0 MU50329HT
4.0 MU50429HT
1.0 MU50129NT
2.0 MU50229NT
3.0 MU50329NT
4.0 MU50429NT
1.0 MU50117HT
2.0 MU50217HT
3.0 MU50317HT
4.0 MU50417HT
1.0 MU50117NT
2.0 MU50217NT
3.0 MU50317NT
4.0 MU50417NT
Multi-unit Angled Abutment (29°)
- Abutment Screw (MUAS20) included
Multi-unit Angled Abutment (17°)
- Abutment Screw (MUAS20) included
Multi-unitAbutment (Straight)
- Mutli-unit Abutment Screw included.
Type
Type
Type Ref.C
Ref.C
Ref.C
Ø5.0
Ø5.0
Ø5.0
Hex
Hex
Hex
Non-Hex
Non-Hex
Non-Hex
Abutment & Prosthetic Options » Abutment Level Prosthesis
For the design concept and rationale of the Multi-unit Abutment, please refer to Page 083.
Hex
AAAAnnnnyyyyyyyyyOOOOOOOOnnnnnnnneeeeeeee® ® ® ® ®
IIIIIInnnnnnnnttttttteeeeeerrrrrrnnnnnnaaaall
Ø4.8ETH100T
ETN100T
Ø4.8
9.4
Ø4.8
Multi-unit Impression Coping (Transfer)
Multi-unit ImpressionCoping (Pick-up)- Guide Pin(RICG150) included
Multi-unit Temporary Cylinder- Cylinder Screw (TASH140) included
Multi-unit Lab Analog
Ø4.8
Ø4.8
9.4
Ref.C
Ref.C
Ref.C
Ref.C
Ø4.8
Ø5.0
Multi-unit Healing Cap
Ref.C
Ø5.0
Abutment & Prosthetic Options » Abutment Level Prosthesis
Multi-unit Gold Cylinder- Cylinder Screw (TASH140) included
For customizing abutment for screw retained
multi-unit restoration.
- Available in both octa(red) and non-octa(white)
Threaded sleeves allow for better retention of resin
or wax.
Available in three diameters (Ø4.0, Ø5.0 & Ø6.0).
Recommend torque : 30Ncm
Multi-unit CCM Cylinder- Cylinder Screw (TASH140) included
situations.
Can be casted with non-precious alloys (Ni-Cr,
Cr-Co alloys).
Non-precious melting temperature : Depend on
Manufacturer
Threaded sleeves for convenient Resin / Wax-up.
Multi-unit Plastic Cylinder- Cylinder Screw (TASH140) included
Economical option
Used for customizing abutment for screw retained
multi-unit restorations.
- Available in both octa(red) and non-octa(white)
Threaded sleeves allow for better retention of resin or wax.
Ø4.8White
Ø4.8
Ø5.2White
Sleeve color
Sleeve color
Sleeve color
Ref.C
Ref.C
Ref.C
Ø4.8
Ø4.8
Ø5.2
Ø5.0
Multi-unit EZ Post Cylinder- Cylinder Screw (TASH140) included
Ø5.0
Ref.C
Abutment & Prosthetic Options » Abutment Level Prosthesis
AAAAnnnnyyyyyyyyyOOOOOOOOnnnnnnnneeeeeeee® ® ® ® ®
IIIIIInnnnnnnnttttttteeeeeerrrrrrnnnnnnaaaall
Flat Lab Analog
Flat EZ Post Cylinder Flat Gold Cylinder Flat CCM Cylinder Flat Plastic Cylinder
Flat Healing Abutment Flat Cover Screw
Flat Temporary Cylinder
Flat Impression Coping(Pick-Up)
Flat Impression Coping(Transfer)
Flat Abutment
Abutment & Prosthetic Options » Abutment Level Prosthesis
: The main advantage of this Flat Abutment is the freedom on angulation.
Flat Abutment can cover any angulation problems.
: Only for multiple (Cannot be used for single implant)
: Only with screw-fixated type of prosthetics.
Ref.CFlat Abutment
Ø3.5
1.5 FA3515
2.5 FA3525
3.5 FA3535
4.5 FA3545
5.5 FA3555
3.5
Ø3.5 9.5 FIT4012T
Ø3.5 12
Diameter Ref.C
Diameter Ref.C
Flat Cover Screw
Flat Healing Abutment
Flat Impression Coping(Transfer)
- Guide Pin (FGPT) included.
Should be tightened with Impression Driver
(Page.176)
Special impression coping screw which can be
used with a 1.2mm hex driver is available on
request.
Flat Impression Coping(Pick-Up)
- Guide pin (FGPP15) included.
Ø3.5
Ref.C
2 FHA402
3 FHA403
4 FHA404
Ref.C
3.5
1
12
9.5
3.5
3.5
Abutment & Prosthetic Options » Abutment Level Prosthesis
AAAAnnnnyyyyyyyyyOOOOOOOOnnnnnnnneeeeeeee® ® ® ® ®
IIIIIInnnnnnnnttttttteeeeeerrrrrrnnnnnnaaaall
Ø3.5 12
Diameter Ref.CFlat Lab Analog12
3.5
Flat Temporary Cylinder- Flat Cylinder Screw (FAS) included.
Flat EZ Post Cylinder- Flat Cylinder Screw (FAS) included.
Ø4.0
Ref.C
5.5
7.0
Ref.C
4.0
Flat Gold Cylinder- Flat Cylinder Screw (FAS) included.
situations.
Precious and non-precious alloys.
Threaded sleeves for convenient Resin / Wax-up.
Flat CCM Cylinder- Flat Cylinder Screw (FAS) included.
situations.
Can be casted with non-precious alloys (Ni-Cr,
Cr-Co alloys).
Non-precious melting temperature : Depend on
Manufacturer
Threaded sleeves for convenient Resin / Wax-up.
Flat Plastic Cylinder- Flat Cylinder Screw (FAS) included.
Ø3.8
Ø3.8
Ø4.0
Ref.C
Ref.C
Ref.C
3.8
3.8
4.0
Abutment & Prosthetic Options » Abutment Level Prosthesis
Retentive Cap Set
Lab Analog
Impression Coping
Meg-Rhein Abutment
Abutment & Prosthetic Options » Overdenture Prosthesis
AAAAnnnnyyyyyyyyyOOOOOOOOnnnnnnnneeeeeeee® ® ® ® ®
IIIIIInnnnnnnnttttttteeeeeerrrrrrnnnnnnaaaall
Meg-Rhein Package- 1 Meg-Rhein Abutment
- 1 Plastic Carrier
- 1 Stainless Steel Housing
- 3 Retentive Caps
(Black-Lab, Yellow-0.6kg, Pink-1.2kg)
Perfect compatibility with the Rhein83 from Italy.
Recommend torque : 35Ncm.
0
1.0
2.0
3.0
4.0
5.0
6.0
Ref.C
Advantage
*Smaller & more convenient than others, with proven Italian technology.
Product K & L
Product P
4.4mm
2.1mm
2.25mm
2.3mm
5.5mm
5.2mm
30º
Violet(2.7kg)
White(1.8kg)
Pink(1.2kg)
Yellow(0.6kg)
1. Small & Easy-to-use Housing
System 2. Tilting Angle & Various Retentive
Caps of the Meg-Rhein
3. Low Reduction Rate & Uniform
Variance of Retentive Force
100
80
60
40
20
0
Meg-Rhein Product K
Product L Product P
Rete
nti
ve f
orc
e (kg
) 3
2
1
0
R2=0.85
27%
73
49%
51
38%
62
37%
63
2
Abutment & Prosthetic Options » Overdenture Prosthesis
8.8
Stainless Steel
Housing
Black Cap
Yellow Cap
Pink CapM
eg-Rhein Abutment
with a Plastic Carrier
Ref.C
2 Stainless Steel Housing
2ea/pack
Ref.C
Ref.C
Stainless Impression Coping (Pick-Up)
2ea/pack.
Italy - Rhein 83 products.
For accurate (pick-up type) impression.
Metal with groove design to prevent from swaying.
Ref.C
5.5
Abutment & Prosthetic Options » Overdenture Prosthesis
4 Retentive Caps (Violet)
Can be used for more retentive force following
white cap(1.8kg).
4 Retentive Caps (White)
Can be used for more retentive force following pink
cap(1.2kg).
AAAAnnnnyyyyyyyyyOOOOOOOOnnnnnnnneeeeeeee® ® ® ® ®
IIIIIInnnnnnnnttttttteeeeeerrrrrrnnnnnnaaaall
Ref.C
83
40
Ref.C
Ref.C
90
Abutment & Prosthetic Options » Overdenture Prosthesis
Meg-RheinLab Analog
To make denture model.
Retentive Cap Insertion Tool
Retentive Cap insertion tool.
Retentive Cap Removal Tool
Retentive Cap removal tool.
resorbed.
tissue.
Clinical Case
- Courtesy of Dr. Jung Sam Lee
Single molar implant with bone augmentation.
12.07.25
before treatment
12.07.25
AAAAnnnnyyyyyyyyyOOOOOOOOnnnnnnnneeeeeeee® ® ® ® ®
IIIIIInnnnnnnnttttttteeeeeerrrrrrnnnnnnaaaallClinical Case
12.12.31 13.05.09 14.04.08
ent sites.
- Courtesy of Dr. Jung Sam Lee
Two molar implants with i-Gen membrane.
12.06.11
Clinical Cases
AAAAnnnnyyyyyyyyyOOOOOOOOnnnnnnnneeeeeeee® ® ® ® ®
IIIIIInnnnnnnnttttttteeeeeerrrrrrnnnnnnaaaallClinical Cases