Glenn WhyteSimulation Product Manager
Introducing the Simulation Buyer’s Guide
SOLIDWORKS Simulation and SIMULIA Abaqus
2
SOLIDWORKS Analysis ProductsSOLIDWORKS Simulation Premium
SOLIDWORKS Simulation Professional
Static Frequency & Buckling Thermal Drop Test
FatigueMotion Simulation Optimization Pressure
Vessel
Flow Simulation
Electronic Cooling Module
HVAC Module
Nonlinear (static & dynamic)
Harmonic
RandomVibrationTime History
Composites Response Spectra
SustainabilityPlastics
Professional
Premium
Advanced
SIMULIA Abaqus
Standard
Explicit
CFD
3
AgendaThe Simulation Buyer’s Guide provides clear instructions and decision points for selecting analysis software for a variety of applications in these analysis areas and more: Static Structural Analysis Dynamic Structural Analysis Thermal Analysis Fluid Flow Analysis
4
RoadmapStatic Structural Analysis• Response of structures to mechanical loads – forces, pressures, torques, etc.• Can also include estimations of fatigue life and buckling failure• Includes both linear and nonlinear approximations
5
Initial Visual RoadmapStatic Structural Analysis Options• SimXpress –every license of SOLIDWORKS
• Single part only, limited conditions• Simulation – part of SOLIDWORKS Premium
• Comprehensive linear static stress analysis• Yield is only mode of failure considered
• Simulation Professional • Adds other modes of failure – buckling, fatigue• Adds productivity tools – optimization, submodeling
• Simulation Premium• Adds nonlinear capability• Includes large displacement modeling• Nonlinear material models
• SIMULIA Abaqus CAE• Analyst level tool for complex scenarios
6
RoadmapStatic Structural – SIMULIA Abaqus applicationsSample extension applications for SIMULIA Abaqus
• Very large deformation and nonlinear loading• Crack propagation and fracture modeling• Complex composite material analysis• Metal forming applications
7
Initial Visual RoadmapDynamic Structural Analysis• Response of models to loading that changes with time (or frequency)• Can be considered to include kinematic motion analysis tools like SOLIDWORKS Motion• Simplest vibration information starts with extraction of modal frequencies• Full dynamic analysis provides amplitude of response vs time or frequency.
8
Initial Visual RoadmapDynamic Structural Analysis Options• SOLIDWORKS Motion – SOLIDWORKS Premium
• Rigid body, kinematic motion analysis using SOLIDWORKS mates• Loads can be transferred at key points to SOLIDWORKS Simulation
• Frequency Analysis – Simulation Professional• Modal frequencies of a structure• Identifies “danger points” for vibration
• Drop Test – Simulation Professional• Limited boundary conditions
• Dynamic Analysis – Simulation Premium• True displacement/acceleration/stress response to excitation• Time History – typically shock or impact testing• Harmonic – vibration testing• Random Vibration – complex, difficult to quantify vibration
• SIMULIA Abaqus CAE• Analyst level dynamic testing – multibody dynamics, crash testing
9
Initial Visual RoadmapDynamic Structural – SIMULIA Abaqus ApplicationsSample SIMULIA Abaqus dynamic applications• Impact testing (e.g., bird strike)• Crash testing• Drop testing• Multi-body dynamics
10
Initial Visual RoadmapThermal AnalysisAssessment of how heat flows through a model
• Three modes of heat transfer can be evaluated – conduction, convection, radiation.• FEA approaches make an estimate of convection• CFD approaches analyze convection and fluid flow explicitly
11
Initial Visual RoadmapThermal Analysis OptionsTwo approaches to thermal analysis available for SOLIDWORKS
• SOLIDWORKS Simulation Professional – Thermal Analysis• FEA-based approach to thermal analysis• Convection is estimated by specifying a convection coefficient• Conduction and radiation are explicitly calculated
• SOLIDWORKS Flow Simulation• CFD-based approach to thermal analysis• Convection is analyzed explicitly by calculating the fluid flow from natural or forced convection• Conduction and radiation are explicitly calculated
• Both approaches can include steady state or thermal analysis, and both approaches can export thermal results to stress analysis for thermal stress and distortion analysis
12
Initial Visual RoadmapFluid Flow AnalysisAssessment of how gas or liquid flow around or through a model
• Used for estimation of aerodynamic drag and lift• Pressure drop calculations in valves/pipes and industrial components• Often run in conjunction with thermal analysis – our CFD code considers both fluid flow and
heat transfer calculations simultaneously.
13
Initial Visual Fluid Flow Analysis Options• FloXpress – Every license of SOLIDWORKS
• Very simple internal flow analysis with limited input conditions, and visual results only• SOLIDWORKS Flow Simulation
• Comprehensive CFD solution• Rich analysis conditions available• Incompressible, compressible flows, up to High Mach numbers
• SIMULIA Abaqus CAE• High end analysis solution• Includes fluid-structure interaction capabilities• Multiple CFD methodologies available
SIMULATION MONTH 2014 SCHEDULE
Focused reviews of the Simulation Buyer’s Guide based on specific industry applications:
All sessions 11AM PDT
Friday, May 16 – High Tech and ElectronicsFriday, May 23 – Life Sciences and Medical DevicesFriday, May 30 – Industrial Equipment and Oil & Gas
>> REGISTER FOR THE WEBINARS
15
Initial Fluid Flow – SIMULIA Abaqus ApplicationsSamples of SIMULIA Abaqus applications:
• Fluid-structure interaction• Free surface flow• Air-bag inflation• Liquid moved by tire tread
16
eLearning WED 11am
Learn tip & tricks to getting the most out of your existing software.
eDemo WED 1pm
See live demonstrations of the many solutions offered by Hawk Ridge.
eLearning – SOLIDWORKSSOLIDWORKS Mechanical Conceptual
May 21
eDemo – Analysis ServicesHRS Analysis Services Overview
May 21
eLearning – ComposerBetter branding and consistent output
May 28
eDemo – CAMWorksSeamless CAD/CAM integration
May 28
Hawk Ridge Systems Supportemail: [email protected]: support.hawkridgesys.com
Recorded Webinars: http://www.hawkridgesys.com/events/recorded-webinars/
Thank you for attending!
Your NameYour Title
877.266.4469 US 866.587.6803 CAN