Download - IP65 - Beghelli
SD – SmartDriver: Dimmable control gear for LEDsources which has two connectors for as many
optional devices that modify the characteristics ofthe fixture. The first connector is exclusively for connection of the
Intelligent Opticom Photosensor. The second connector allowsinstallation of a Building Automation Radio module chosen from
the SmartDriver series. The third connector allows the connectionof the emergency Inverter LED Plug & Light. Alternative modules
that can be connected: DALI Module and 1-10 V Module.
Technologically advanced products, designed with aview to energy saving, recycling at the end of their
working life, and reduced wear of parts during use.
Suitable for hospitals
CivilFixtures particularly indicated for installations in homes
and small commercial premises
ArchitecturalFixtures particularly indicated for installations in luxuryhotels, designer stores, historic buildings, museums,
showrooms, management centres
Tertiary and industrialFixtures particularly suited for installations in schools,hospitals, public bodies, hotels and accommodation
facilities, offices, industrial facilities
Optical programming technologythrough Smartphone and dedicated app,
for direct control of the devices
Protection Grade against external factors(According to CEI EN 60598-1)
IP20IP40
IP65
Optic which decreases glare.
Protection Grade against external factors – for differentparts of the luminaire (body, optics)
(According to CEI EN 60598-1)
Emergency lighting fixtures that ensure1 hour of autonomy after 12h recharging
Protection Grade against impact of the fixture complyingwith test methods (According to EN 50102)IK09
Luminaire with class II insulation level. Fixtures without thissymbol are to be considered class I.
Fixture intended for use with a risk of explosion due to thepresence of combustible powders or explosive
substances according to the ATEX Directive
Car Parks, Autosilos, GarageDevices with wide optics specially designed to maximise
lighting inside underground car parks and garages
Luminaire with product integrity according to UNI 9554,DIN 18031-3. Suitable for installations in the gym.
Plug & Light Independent Inverter and integrated batteryfor fast and easy installation in full compliance with safety
requirements without affecting the performance of the device
DARKLIGHT
2
TR
HHOSPITAL
Self-powered luminaires without diagnostics
12 HOURSRECHARGE
UGR <19 is the indicative value of glare as stated by rele-vant EU-standards chart method for interior application.The real glare value is always given by the actual mutual
positions of observer and glare source (luminaire) and concurrently,by actual parameters of the whole lighting system installed.
UGR<19
LightingSymbols and approvals
GSM transmission of the energy saving data tothe Beghelli Services diabase
Transmission protocol to connect to the Web
Built-in FH-DSSS radio transceiver operating inthe band 2,400–2,863 GHz
Fixtures characterised by particular resistanceto UV radiations
Indicates Resistance Temperature of the product to theincandescent wire test (CEI EN 60598-1)
Devices complying with European Community directives
European quality mark
850°C
Fixtures with particular resistance to UV radiation andaggression by mineral oilsUV-OIL
GPRS
HACCP
Fixtures with absence of potentially contaminatingelements, suitable for use in places subject to
HACCP audit (food supply chain).
L80B20 indicator of product flux maintenance. It specificallyindicates that, within the number of hours specified on the
product data sheet, 80% of the number of LEDs will notlose more than 20% of the flux. The number of hours speci-
fied in the product datasheet refers to the most criticalproduct, therefore in conditions of lower power and at a
working temperature lower than 25°C a substantial increasein the product performance may be expected.
SDCM – Standard Deviation Color Matchingis the standard deviation of the correspondence of colours
between two lamps. With a value of 3 SDCM or less, the lampsemit light with a colour that is difficult to perceive with the
human eye.
Light sources supplied with Beghelli fixturesBeghelli products must be used with light sources complying with
the provisions of the most recent laws in terms of energyefficiency and environmental impact. When supplied with the
lighting fixtures, the proposed lamps supplied comply with theprovisions of the respective laws
(reg 244/09, 245/09 and 1194/2012).
3
RM “Rest mode” – option to switch off the emergency function
4
Recessed
Ceiling and Suspended
D170/1150 LED page 70
IP20
D170/1150 LED adjustable page 72
IP40
ZOOM LED – recessed page 76
IP40
WW135/170 LED page 74
IP44 IP20
RAIL SYSTEM LED page 30
IP40
P236/258 LED page 18
IP20
CANES LED page 16
IP20
LENS FILA LED page 20
IP40
Decorative
ZOOM LED – rail page 58
IP40
Downlight
ZOOM LED page 60
IP40
EXPO LED page 64
IP40
ZOOM 1× LED page 62
IP40
D226 LED page 68
IP20
FUNZIONE3 LED page 66
IP40
ATOMIC LED page 14
IP40
ATOMIC TOP LED page 10
IP20 IP40
LENS PANEL LED 600X600 page 46
IP20 IP40
LED PANEL SD 600X600 page 50
IP40 IP65
I 418 LED page 54
IP20 IP54
ARIETIS LED page 56
IP65
LENS PANEL LED 1200X300 page 48
IP20 IP40
LED PANEL SD 1200X300 page 52
IP40
ATOMIC LED page 44
IP40
ATOMIC TOP LED page 40
IP20 IP40
5
STRADA LED page 96
IP66
CONTROL SYSTEMS page 98
WIFI GPRS
BS100 SD LED page 82
IP65
BS240 LED page 84
IP66
ACCIAIO ECO LED page 78
IP66
ACCIAIO EXTREME LED page 80
IP66
H250/400 LED page 86
IP66
Industrial lighting
F30/50/70 LED page 94
IP66
FH70/150/200 LED page 92
IP66
FH350 LED page 90
IP66
F250/400 LED page 88
IP66
Floodlight
Building automation lighting & SoftwareStreet lighting
Emergency LED modulesEmergency inverters
SMAR
T DR
IVER
CEIL
ING
AND
SUSP
ENDE
DRE
CESS
EDDE
CORA
TIVE
DOW
NLI
GHT
INDU
STRI
ALFL
OODL
IGHT
STRE
ETBU
ILDI
NG A
UTOM
ATIO
NEM
ERGE
NCY
INVE
RTER
SEM
ERGE
NCY
LED
MOD
ULES
Systems description and compatibility
OPTICAL SYSTEM FOR COMMUNICATIONAMONG FIXTURES AND SMARTPHONEVIA OPTICOM APP:· TO CONTROL LIGHTING,
SWITCHING, DIMMING, PRESENCESENSOR, AUTODIMMER
· TO SET PARAMETRES LIKE POWER,SENSOR SENSITIVITY AND ENABLE/DISABLE FEATURES
page 6
HIGH TECH ADAPTABLE DRIVER:
· WITH SENSOR –> OPTICOM· WITH SENSOR –> AUTODIMMER· WITH P&L INVERTER –> EMERGENCY· WITH RADIO MODULE –> WIFICONTOLLABLE
· WITH DALI –> DALI COMPATIBLE· WITH 1-10V –> 1-10V COMPATIBLE
page 8
SMARTDRIVER
SMART DRIVER
FIXTURE EQUIPPED WITH BASIC DRIVERNOT DIMMABLE AND NOT ADAPTABLE
ECO DRIVER
INVERTER LED page 106
IP20 IP65
AT LG
INVERTER LED PLUG & LIGHT page 104
IP40 IP65
TR
LED EMERGENCY MODULE page 110
IP20
AT LG
ECOLED INVERTER LED MODULE page 114
IP20
TR
Light that communicates with light – this is
the operating principle of the new Beghelli-
patented technology.
Opticom (OPTIcal COMmunication Techno -
lo gy), is an optical communication system
which can communicate, read and change
the performance and functions of each indi-
vidual Beghelli lighting device equipped with
a Smart Driver intelligent power supply, using
the flash and the camera of a simple smart-
phone.
This advanced technology simplifies and
optimises the work of installers, who can
programme lighting devices without any
additional equipment, using the dedicated
app which is available for free for both iOS
and Android systems. This solution also
brings significant added value for end users,
enabling them to control their lamps via
smartphone.
All SmartDriver Beghelli devices
equipped with the special intelligent
photosensor become Opticom Tech no -
logy devices, which can be used to
programme the intelligent photosensor in
order to manage the autodimming functions.
This can be carried out both in natural light
compensation mode (Natural Light) with
automatic reduction of the power of the
device, and in Dynamic Light mode, which
senses variations in light due to movement of
people and subsequently increases illumi-
nance. Using the dedicated app, each indi-
vidual lighting device can still be adjusted to
the most suitable power level, with just one
click.
Opticom Technology: the multi-func-
tional system that renders Beghelli SD
technology even more intelligent, for
energy savings of more than 80% (30%
more than conventional LED systems),
courtesy of the intelligent photosensor
Natural Light and Dynamic Light functions.
opticom.beghelli.itThe Beghelli website also contains the most up-to-date information about Opticom technology:operating principles, commands and programming, as well as a list of compatible smartphones.
Smartphone-based optical communications technologyfor controlling and programming lighting and emergency lighting
Type of system chosen:Emergency or illumination
“User” screen for sendingcommands to the lamp
®
6
The Evolution of Control
The “programming” section, to setupparametres. To access to this section
is required to be registred asinstaller/owner.
Here to dimm luminare or toenable/diasble autodimmer andpresence sensor. For deeper settingspress “programmation”.
The optical communication among smartphone and the smart driver fixture equipped withopticom photosensor. This new patented tecnology lets to control and configure lightingwithout any additional external control unit.
App notification. Smartphonerequires to be oriented to the ceilingto start light flashes comunication.
7
SMARTDRIVER
SMARTDRIVER
The integration of the SmartDriver power supply marked a turningpoint in lighting systems technology, both in terms of the flexibilitythat this brought and with regard to potential increases in function-ality. This new generation electronic power supply enables energysavings of more than 80%. With the integration of the Opticom sys-tem, which features as standard on all SmartDriver devices, the pri-mary functions of each device can be programmed via the Opticomapp, which operates through the flash on a smartphone. TheSD Driver is specifically designed for industrial use (pursuant toEN 61000-6-2), and is resistant to overvoltage surges of ≤4 kV.
The SmartDriver system also allows to be integrated with addi -tional modules to extend the light configuration range. Thanks ofthe universal connector, SD fixtures are designed to meet themost important market requirements. It’s now possible to controllighting in a Beghelli wireless way, or to interface Beghelli productsin DALI or 1.10V standards.The automatic light regolation can be adjusted automaticallythanks of Beghelli patented algorithm AUTODIMMER (NaturalLight and Dynamic Light) or manually, using smartphone andOpticom Technology.
Wireless controlEvery SD fixture equipped with wireless module 15022can be controlled and monitored via central unit, app, soft-ware, locally and remotly. These system architecturedoesn’t need any additional cables or BUS (e.g. DALI). Forthis reason the Beghelli solution is suitable for new instal-lation, for renovations, and dynamic contexts. The Smartdriver modularity and all the possibility available as lightautomation offer the best choise for several kind of instal-lations and context.
MODULE
MODULE
DOMOTIC
All SD devices are equipped with Smart Driver,integrated Photosensor and optional Modules
8
INTELLIGENT PHOTOSENSOR
AutodimmerNatural Light
AutodimmerDynamic Light
Smartphone Interfaceto control and set up system
Smart driver isembedded in all theBeghelli SD fixture
MODULEMODULE
DOMOTIC
1. 2. 3.
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
Centralized lighting controlThe central unit can set every kind of requierd scene. Adifferent scene for every specific needs or place or situa-tion. Light scenes can be activated via software (controlpanel), via WiFi and dedicated APP, via scheduler or vialocal wireless interfaces wired to switches or sensors.It’s also possible via central unit to remote monitor andcontrol lighting.
Inverter Plug&Light:integrated top emergencySmart Driver allows the new Plug&Light inverter to be con-nected to every Beghelli SD fixture in the simplier andfaster way. This revolutionary idea is able to extend a SDlighting fixture in a Lighting and Emergency lighting fixureonly plugging a cable among inverter and driver.
Full compatibilitywith DALI and 1-10V systemsThe design of the SmartDriver allows information to beexchanged with other communication protocols such asDALI. DALI and 1-10V modules can be used with both theDALI and analogue dimming direct command interface.When luminares are interfaced in DALI or 1-10V, Beghelliautodimmer gets disabled.
Smart Driver, the light Intelligence
9
Opticom smart photosensorAutodimmer Natural Light function
Each SmartDriver device can be equipped with anAutodimmer INTELLIGENT PHOTOSENSOR, which isused to automate the basic fixture functions: the illumi-nance is managed via the automatic adjustment of thelight intensity, in accordance with the light already presentin the environment, enabling energy savings which are upto 30% higher that those seen on LED devices withfixed light intensity.
Autodimmer Dynamic Light function
The new OPTICOM INTELLIGENT PHOTOSENSORTechnology, which is included on SmartDriver devices,reacts to the slightest variation in light resulting from themovement of people in the vicinity of the light source. Thissudden change in light activates a pre-programmed set-ting, activating the device at 100% brightness, for exam-ple. This status can be set with a programmable delay (of30 seconds upwards) in line with requirements, beforereturning to minimum brightness unless new movementsare detected. This unique feature allows the system tocomply with workplace lighting standard EN 12464-1, aswell as enabling additional energy savings of 20%compared to use of the Autodimmer alone, for atotal saving of over 85%.The Dynamic Light Autodimmer function is optimised formounting at heights of less than 4 m.
Opticom Technology interface
The Opticom Technology interface for programming andmanaging lighting devices. The INTELLIGENT PHOTO-SENSOR receives and transcodes the light pulses trans-mitted by the smartphone flash, and transforms these intoinstructions or commands to set all of the parameters forthe device. For example: in an environment with the lightlevel dimmed to 50%, the device can be changed to100% via the Opticom smartphone controller.
SMAR
T DR
IVER
Smart Driver LED ProtectionSmart driver is designed to save LED source in caseof enviromental high temperatures. In that case theDERATING algorytm starts to work decreasing poweraccording the characteristic.
DERATING: SD is able to decrease power to compensate ambienthigh temperatures in order to protect the fixture lifespan.
OUTPUT POWER vs OPERATING TEMPERATURE
Product Ambient Temperature °C
20 40 60 80 100
20%
0%
40%
60%
80%
100%
120%
Out
put
Pow
er p
erce
ntag
e
F/H400 & analogous
F/H250 & analogous
A258ESD & analogous
L
L’
L
B
H X
Length “L” including endingsLength “L’” profile without endings
Atomic TOP LED is a luminaire of a new generation characterized bya very good lighting efficiency, which ensures the high comfort of illu-mination. The luminaire is suitable for lighting in restaurants, shops, ho-tels, finance houses, offices, classrooms, corridors and stairways.Housing is made of anodized aluminium profile with steel endings.Equipped with frosted acrylic diffuser or micro-prism optic system. The luminaire equipped with a microprismatic diffuser ensures veryhigh efficiency and reduces the glare value of UGR below 19. It pro-vides a very good visual comfort with no glare. It fits perfectly in offices,conference and training rooms, lecture halls as well as exhibitionspaces and showrooms. Available with an emergency LED inverter for emergency usage.Luminaires for separate mounting are available in IP40, luminaires forcoupling in lines in IP20.
IP40IP20
GENERAL CHARACTERISTICS
Power supply SD Version: 93–265 VAC 50/60 Hz176–250 VDC
ED Version: 230 VAC ±10 % 50 Hz
Standard EN 60598-1, EN 60598-2-1,EN 60598-2-22 (fundamental require-ments), EN 62471 (photobiological
hazard)
Protection grade IP20, IP40
Working temp. -20 °C ÷ +40 °C
Mounting surfaced or suspended mountingSEPARATE (endings are components ofthe luminaire), surfaced or suspendedmounting COUPLING IN LINES (endingsto be ordered separately)
Body anodized aluminium profile and steelendings in grey
Diffuser opal or microprismatic optics
Driver SD Version:SmartDriver (cos j ≥ 0.96)
ED Version:Eco Driver (cos j ≥ 0.95)
MTBF Control gear** 80 000 h
Luminous flux >70 000 h (L80B20) maintenance**
Colour deviation 3 SDCM
** At environmental reference temperature of 25 °C
15039 OPTICOM PHOTOSENSOR
Accessories supplied (SD version) Order code Description
Efficiency and dimming
The increase in luminous efficacy (lm/W) andthe useful life of the device may vary signifi-cantly according to the degree to which it isdimmed. Assuming an average level of 50%of the luminous flux, the following results areobtained with the Atomic LED:
Dimming 50 %Device duration +40 %Luminous efficiency +15 %
99-0275 WIRE SUSPENSION, 1 pc 200 cm (for luminaire 1.2, 1.5 and 2.3 m 2 pcs needed) 99-0095 TRANSPARENT POWER CABLE 200 cm (5× 1.5 mm2) 99-0094 TRANSPARENT POWER CABLE 200 cm (3× 1.5 mm2) 99-0296 END CAP (only for COUPLING IN LINES)
Accessories to be ordered separately
Order code Description
SPECIAL VARIANTS: COLOUR RENDERING ≥90, COLOUR TEMPERATURE ON REQUESTContact the Beghelli sales network
Atomic TOP LEDCeiling and suspended LED luminaire – separate /coupling in lines (dimensional options 1.2 m/1.5 m)
IK05
W • Dimensions (mm) • Weight L’ (profile without end.) L (incl. endings) B H X kg
1.2 m 1 147 1 150 60 81.5 86 2.8 1.5 m 1 432 1 435 60 81.5 86 3.4
SD version
ED version
INVERTER
19358 INVERTER PLUG&LIGHT LED SE/SA 1H 20-60V to be ordered separately
19359 INVERTER PLUG&LIGHT LED SE/SA 3H 20-60V to be ordered separately
19355 INVERTER LED AT/LG 6W 55V 123H to be ordered separately
19356 INVERTER LED LGFM 6W 55V 123H to be ordered separately
EMERGENCY WITH LED INVERTER ATTR LG LGFM
SMARTDRIVERUGR<19
20102 BUILDING AUTOMATION CENTRAL UNIT 20124 BUILDING AUTOMATION CENTRAL UNIT WIFI 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE 15024 DALI MODULE 15034 1-10V MODULE
Building automation to be ordered separately Order code Description
– 2× COUPLER (only for COUPLING IN LINES)
Accessories supplied
Order code Description
10
Atomic TOP LED SmartDriver
LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
A61-10061CWSD Atomic TOP LED SD 4000K 1.2m 19 4 000 >80 21 96 2 600 2 400 114 A+ 1
A61-10062CWSD Atomic TOP LED SD 4000K 1.2m 26 4 000 >80 29 96 3 600 3 300 114 A+ 1
A61-10063CWSD Atomic TOP LED SD 4000K 1.5m 23 4 000 >80 26 120 3 300 3 000 115 A+ 1
A61-10064CWSD Atomic TOP LED SD 4000K 1.5m 31 4 000 >80 35 120 4 400 4 000 114 A+ 1
Separate mounting
LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
A61-10061PCWSD Atomic TOP LED SD 4000K 1.2m 19 4 000 >80 21 96 2 600 2 400 115 A+ 1
A61-10062PCWSD Atomic TOP LED SD 4000K 1.2m 26 4 000 >80 29 96 3 600 3 300 115 A+ 1
Coupling in lines
Atomic TOP LED Eco Driver
LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
A61-10061CWED Atomic TOP LED 4000K 1.2m 18 4 000 >80 20 96 2 500 2 300 115 A+ 1
A61-10062CWED Atomic TOP LED 4000K 1.2m 25 4 000 >80 28 96 3 500 3 200 114 A+ 1
A61-10063CWED Atomic TOP LED 4000K 1.5m 21 4 000 >80 24 120 3 000 2 800 117 A+ 1
A61-10064CWED Atomic TOP LED 4000K 1.5m 33 4 000 >80 36 120 4 600 4 200 117 A+ 1
Separate mounting
LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
A61-10061PCWED Atomic TOP LED 4000K 1.2m 18 4 000 >80 20 96 2 500 2 300 115 A+ 1
A61-10062PCWED Atomic TOP LED 4000K 1.2m 25 4 000 >80 28 96 3 500 3 200 114 A+ 1
Coupling in lines
150
300
450
600
0°15° 30°15°30°
45°45°
60°60°
75°75°
90°90°
105°105° 180°
cd/klmC0 - C80 C90 - C270
Polar DiagramW – Microprismatic diffuser – UGR<19*
INTELLIGENT PHOTOSENSOR
Autodimmer Natural Light
Autodimmer Dynamic Light
Smartphone Interface to control and set up system
MODUL
MODULE
DOMOTIC
1. 2. 3.
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
* UGR < 19 is the indicative value of glare as stated by relevant EU-standards chart method for interior application. The real glare value is always given by the actual mutual positions of observer and glaresource (luminaire) and concurrently, by actual parameters of the whole lighting system installed. This luminaire glare UGR < 19 is performed just in C90-C270 plane at any situation. In case of a particularproject, we can provide Dialux calculation results of actual UGR value(s) in other planes on request.
11
CEIL
ING
AND
SUSP
ENDE
D
Atomic TOP LED SmartDriver
LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
A61-10061CZSD Atomic TOP LED SD 4000K 1.2m 22 4 000 >80 25 96 3 100 2 500 100 A+ 1
A61-10062CZSD Atomic TOP LED SD 4000K 1.2m 31 4 000 >80 34 96 4 300 3 400 100 A+ 1
A61-10063CZSD Atomic TOP LED SD 4000K 1.5m 28 4 000 >80 31 120 4 000 3 150 102 A+ 1
A61-10064CZSD Atomic TOP LED SD 4000K 1.5m 38 4 000 >80 42 120 5 300 4 250 101 A+ 1
Separate mounting
LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
A61-10061PCZSD Atomic TOP LED SD 4000K 1.2m 22 4 000 >80 25 96 3 100 2 500 100 A+ 1
A61-10062PCZSD Atomic TOP LED SD 4000K 1.2m 31 4 000 >80 34 96 4 300 3 400 100 A+ 1
Coupling in lines
Atomic TOP LED Eco Driver
LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
A61-10061CZED Atomic TOP LED 4000K 1.2m 21 4 000 >80 24 96 3 000 2 400 100 A+ 1
A61-10062CZED Atomic TOP LED 4000K 1.2m 33 4 000 >80 36 96 4 600 3 650 101 A+ 1
A61-10063CZED Atomic TOP LED 4000K 1.5m 29 4 000 >80 32 120 4 000 3 200 100 A+ 1
A61-10064CZED Atomic TOP LED 4000K 1.5m 38 4 000 >80 42 120 5 300 4 200 100 A+ 1
Separate mounting
LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
A61-10061PCZED Atomic TOP LED 4000K 1.2m 21 4 000 >80 24 96 3 000 2 400 100 A+ 1
A61-10062PCZED Atomic TOP LED 4000K 1.2m 33 4 000 >80 36 96 4 600 3 650 101 A+ 1
Coupling in lines
0°15° 30°15°30°
45°45°
60°60°
75°75°
90°90°
105°105° 180°
cd/klmC0 - C80 C90 - C270
100
200
300
400
Polar DiagramZ – Opal diffuser – Homogenous
INTELLIGENT PHOTOSENSOR
Autodimmer Natural Light
Autodimmer Dynamic Light
Smartphone Interface to control and set up system
MODUL
MODULE
DOMOTIC
1. 2. 3.
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
12
A typical installation of Atomic TOP LED inoffices and classrooms, where glare level(UGR <19) is a priority for those who usepersonal computers. However, it is equallyimportant to ensure that a sufficient level oflight is diffused throughout the environment.
13
Atomic LED is characterized by a very good lighting efficiency, whichensures the high comfort of illumination. The luminaire is suitable forlighting in restaurants, shops, hotels, finance houses, corridors andstairways. Housing is made of anodized aluminium profile with steelendings. Equipped with frosted acrylic diffuser or micro-prism opticsystem. Available with an emergency LED inverter for emergencyusage.
14
GENERAL CHARACTERISTICS
Equivalent Power* 2× 36, 2× 58, 2× 80 W
Power supply SD Version: 93–265 VAC 50/60 Hz176–250 VDC
ED Version: 230 VAC ±10 % 50 Hz
Standard EN 60598-1, EN 60598-2-1,EN 60598-2-22 (fundamental require-ments), EN 62471 (photobiologicalhazard)
Protection grade IP40
Working temp. -20 °C ÷ +40 °C
Mounting surfaced or suspended mountingSEPARATE (endings are components ofthe luminaire), surfaced or suspendedmounting COUPLING IN LINES (endingsto be ordered separately)
Body anodized aluminium profile and steelendings in grey
Screen frosted acrylic or microprismatic optics
Driver SD Version: SmartDriver (cos j≥ 0.96) ED Version: Eco Driver (cos j≥ 0.95)
MTBF 65 000 h control gear**
Luminous flux >60 000 h (L80B20) maintenance**
Colour deviation 3 SDCM
* Equivalent power for comparison with fluorescent tube fixtures** At environmental reference temperature of 25 °C
15039 OPTICOM PHOTOSENSOR
Accessories supplied (SD version) Order code Description
20102 BUILDING AUTOMATION CENTRAL UNIT 20124 BUILDING AUTOMATION CENTRAL UNIT WIFI 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE 15024 DALI MODULE 15034 1-10V MODULE
Building automation to be ordered separately Order code Description
L
L’
W • Dimensions (mm) • Weight L’ (profile without end.) L (incl. endings) B H X kg
2× 36 SD 1 177 1 180 60 56 61 2.5 2× 58 SD 1 177 1 180 60 56 61 2.5 2× 80 SD 1 467 1 470 60 56 61 3.3(2×) 2× 36 SD 2 348 2 351 60 56 61 5.0(2×) 2× 80 SD 2 970 2 973 60 56 61 6.6
Version (2×) 2× 36 SD and (2×) 2× 80 SD include 2× SD and 2× OPTICOM.
90-0096N WIRE SUSPENSION, 1 pc, 200 cm(for luminaire 1.2, 1.5 and 2.3 m 2 pcs needed,for luminaire 2.9 m 3 pcs needed)
99-0094 TRANSPARENT POWER CABLE 200 cm (3× 1.5 mm2) 99-0095 TRANSPARENT POWER CABLE 200 cm (5× 1.5 mm2) 99-0123 ENDING FOR CEILING VERSION COUPLING IN LINES (1 pc) 99-0125 COUPLER FOR LUMINAIRES COUPLING IN LINES
Accessories to be ordered separately
Order code Description
SPECIAL VARIANTS: COLOUR RENDERING ≥90, COLOUR TEMPERATURE ON REQUESTContact the Beghelli sales network
125 250 375 500
[ l ] cd/1 000 lm C0 – C180 C90 – C270
Polar Diagram
SMARTDRIVER
Ceiling and suspended LED luminaire – separate /coupling in lines (dimensional options 1.2 m/1.5 m/2.3 m/2.9 m)
IK05IP40
SmartDriver
W • Dimensions (mm) • Weight L’ (profile without end.) L (incl. endings) B H X kg
2× 36 1 156 1 159 60 56 61 2.5 2× 58 1 156 1 159 60 56 61 2.5 2× 80 1 446 1 449 60 56 61 3.3 (2×) 2× 36 2 306 2 309 60 56 61 5.0 (2×) 2× 80 2 928 2 931 60 56 61 6.6
Eco Driver
X
B
H
Length “L” including endingsLength “L’” profile without endings
SD version
ED version
Atomic LED
Efficiency and dimming
The increase in luminous efficacy (lm/W) andthe useful life of the device may vary signifi-cantly according to the degree to which it isdimmed. Assuming an average level of 50%of the luminous flux, the following results areobtained with the Atomic LED:
Dimming 50 %Device duration +40 %Luminous efficiency +15 %
INTELLIGENT PHOTOSENSOR
Autodimmer Natural Light
Autodimmer Dynamic Light
Smartphone Interface to control and set up system
MODULEMODULE
DOMOTIC
1. 2. 3.
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
INVERTER
19358 INVERTER PLUG&LIGHT LED SE/SA 1H 20-60V to be ordered separately
19359 INVERTER PLUG&LIGHT LED SE/SA 3H 20-60V to be ordered separately
19355 INV LED AT/LG 6W 55V 123H to be ordered separately
19356 INV LED LGFM 6W 55V 123H to be ordered separately
19372 INVERTER LED AT/LG 8W 55V 123H to be ordered separately
EMERGENCY WITH LED INVERTER ATTR LG LGFM
Atomic LED SmartDriver
LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
2× 36 A11-10001CMSD Atomic LED 2x36 SD 4000K 1.2m 36 4 000 >80 40 96 4 180 3 483 87 A+ 1
2× 36 A11-10001CWSD Atomic LED 2x36 SD 4000K 1.2m 36 4 000 >80 40 96 4 180 3 430 86 A+ 1
2× 58 A11-10002CMSD Atomic LED 2x58 SD 4000K 1.2m 54 4 000 >80 59 144 6 280 5 235 89 A+ 1
2× 58 A11-10002CWSD Atomic LED 2x58 SD 4000K 1.2m 54 4 000 >80 59 144 6 280 5 170 88 A+ 1
2× 80 A11-10031CMSD Atomic LED 2x80 SD 4000K 1.5m 55 4 000 >80 63 180 7 970 6 640 105 A+ 1
2× 80 A11-10031CWSD Atomic LED 2x80 SD 4000K 1.5m 55 4 000 >80 63 180 7 970 6 730 107 A+ 1
(2×) 2× 36 A11-10027CMSD Atomic LED (2x)2x36 SD 4000K 2.3m 72 4 000 >80 80 192 8 360 7 000 88 A+ 1
(2×) 2× 36 A11-10027CWSD Atomic LED (2x)2x36 SD 4000K 2.3m 72 4 000 >80 80 192 8 360 6 860 86 A+ 1
(2×) 2× 80 A11-10028CMSD Atomic LED (2x)2x80 SD 4000K 2.9m 115 4 000 >80 128 360 15 950 13 280 104 A+ 1
(2×) 2× 80 A11-10028CWSD Atomic LED (2x)2x80 SD 4000K 2.9m 115 4 000 >80 128 360 15 950 13 460 105 A+ 1
LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
2× 36 A11-10008CMSD Atomic LED 2x36 SD 4000K 1.2m 36 4 000 >80 40 96 4 180 3 483 87 A+ 1
2× 36 A11-10008CWSD Atomic LED 2x36 SD 4000K 1.2m 36 4 000 >80 40 96 4 180 3 430 86 A+ 1
2× 58 A11-10009CMSD Atomic LED 2x58 SD 4000K 1.2m 54 4 000 >80 59 144 6 280 5 235 89 A+ 1
2× 58 A11-10009CWSD Atomic LED 2x58 SD 4000K 1.2m 54 4 000 >80 59 144 6 280 5 170 88 A+ 1
Atomic LED Eco Driver
LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
2× 36 A11-10001CM Atomic LED 2x36 4000K 1.2m 36 4 000 >80 40 96 4 180 3 483 87 A+ 1
2× 36 A11-10001CW Atomic LED 2x36 4000K 1.2m 36 4 000 >80 40 96 4 180 3 430 86 A+ 1
2× 58 A11-10002CM Atomic LED 2x58 4000K 1.2m 54 4 000 >80 59 144 6 280 5 235 89 A+ 1
2× 58 A11-10002CW Atomic LED 2x58 4000K 1.2m 54 4 000 >80 59 144 6 280 5 170 88 A+ 1
2× 80 A11-10031CM Atomic LED 2x80 4000K 1.5m 69 4 000 >80 77 180 9 420 7 850 102 A+ 1
2× 80 A11-10031CW Atomic LED 2x80 4000K 1.5m 69 4 000 >80 77 180 9 420 7 740 100 A+ 1
(2×) 2× 36 A11-10027CM Atomic LED (2x)2x36 4000K 2.3m 72 4 000 >80 80 192 8 360 7 000 88 A+ 1
(2×) 2× 36 A11-10027CW Atomic LED (2x)2x36 4000K 2.3m 72 4 000 >80 80 192 8 360 6 860 86 A+ 1
(2×) 2× 80 A11-10028CM Atomic LED (2x)2x80 4000K 2.9m 138 4 000 >80 154 360 18 840 15 700 102 A+ 1
(2×) 2× 80 A11-10028CW Atomic LED (2x)2x80 4000K 2.9m 138 4 000 >80 154 360 18 840 15 480 100 A+ 1
Separate mounting
Separate mounting
Coupling in lines
LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
2× 36 A11-10008CM Atomic LED 2x36 4000K 1.2m 36 4 000 >80 40 96 4 180 3 483 87 A+ 1
2× 36 A11-10008CW Atomic LED 2x36 4000K 1.2m 36 4 000 >80 40 96 4 180 3 430 86 A+ 1
2× 58 A11-10009CM Atomic LED 2x58 4000K 1.2m 54 4 000 >80 59 144 6 280 5 235 89 A+ 1
2× 58 A11-10009CW Atomic LED 2x58 4000K 1.2m 54 4 000 >80 59 144 6 280 5 170 88 A+ 1
Coupling in lines
15* Equivalent power for comparison with fluorescent tube fixtures; M – frosted acrylic diffuser, W – micro-prism optic system
CEIL
ING
AND
SUSP
ENDE
D
16
W • Dimensions (mm) • Weight L B H kg
2× 36 934 225 45 2.8 2× 58 934 225 45 2.8
99-080/120/ES WIRE PENDANT WITHOUT POWER CABLE (120 cm) 90-081/120/ES WIRE PENDANT WITH 3× 1.5 mm2 POWER CABLE (120 cm) 90-082/120/ES WIRE PENDANT WITH 5× 1.5 mm2 POWER CABLE (120 cm)
Accessories to be ordered separately
Order code Description
Canes LED is a LED luminaire designed for separate ceiling andsuspended mounting. Housing is made of a steel sheet finished withpowder technology varnishing, white colour RAL 9003 with highlypolished parabolic louvre. The luminaire is suitable for offices, corridorsand stairways, shops, lecture halls. Available with an emergency LEDinverter for emergency usage.
GENERAL CHARACTERISTICS
Equivalent Power* 2× 36, 2× 58 W
Power supply SD Version: 93–265 VAC 50/60 Hz176–250 VDC
ED Version: 230 VAC ±10 % 50 Hz
Standard EN 60598-1, EN 60598-2-1,EN 60598-2-22 (fundamental require-ments), EN 62471 (photobiologicalhazard)
Protection grade IP20
Working temp. -20 °C ÷ +40 °C
Mounting separate mounting on a ceiling orsuspension
Body steel sheet finished with powdertechnology varnishing, white colourRAL 9003
Driver SD Version: SmartDriver (cos j≥ 0.96) ED Version: Eco Driver (cos j≥ 0.95)
MTBF 65 000 h control gear**
Luminous flux >60 000 h (L80B20) maintenance**
Colour deviation 3 SDCM
* Equivalent power for comparison with fluorescent tube fixtures** At environmental reference temperature of 25 °C
Efficiency and dimming
The increase in luminous efficacy (lm/W) andthe useful life of the device may vary signifi-cantly according to the degree to which it isdimmed. Assuming an average level of 50%of the luminous flux, the following results areobtained with the Canes LED:
Dimming 50 %Device duration +40 %Luminous efficiency +15 %
15039 OPTICOM PHOTOSENSOR
Accessories supplied Order code Description
SPECIAL VARIANTS: COLOUR RENDERING ≥90, COLOUR TEMPERATURE ON REQUESTContact the Beghelli sales network
20102 BUILDING AUTOMATION CENTRAL UNIT 20124 BUILDING AUTOMATION CENTRAL UNIT WIFI 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE 15024 DALI MODULE 15034 1-10V MODULE
Building automation to be ordered separately Order code Description
IK05IP20DARKLIGHT
SMARTDRIVER
Canes LEDCeiling, suspension
17
INTELLIGENT PHOTOSENSOR
Autodimmer Natural Light
Autodimmer Dynamic Light
Smartphone Interface to control and set up system
MODULEMODULE
DOMOTIC
1. 2. 3.
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
Canes LED SmartDriver LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
2× 36 A39-10148CSD CEILING LED 2x36 SD 4000K 31 4 000 >80 36 140 4 800 4 000 111 A+ 1
2× 58 A39-10149CSD CEILING LED 2x58 SD 4000K 42 4 000 >80 47 140 6 160 5 100 109 A+ 1
Canes LED Eco Driver LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
2× 36 A39-10148C CEILING LED 2x36 4000K 34 4 000 >80 39 140 5 640 4 700 120 A+ 1
2× 58 A39-10149C CEILING LED 2x58 4000K 46 4 000 >80 52 140 7 200 6 000 115 A+ 1
INVERTER
19358 INVERTER PLUG&LIGHT LED SE/SA 1H 20-60V to be ordered separately
19359 INVERTER PLUG&LIGHT LED SE/SA 3H 20-60V to be ordered separately
19355 INV LED AT/LG 6W 55V 123H to be ordered separately
19356 INV LED LGFM 6W 55V 123H to be ordered separately
19372 INVERTER LED AT/LG 8W 55V 123H to be ordered separately
EMERGENCY WITH LED INVERTER ATTR LG LGFM240
360
480
600
DARK LIGHT OPTIC
CEIL
ING
AND
SUSP
ENDE
D
Polar Diagram
For SD version: 19358, 19359For ED version: 19355, 19372, 19356
960°CDARKLIGHT
B
HL
W • Dimensions (mm) • Weight L B H kg
2× 36 1 327 206 70 4.6 2× 58 1 327 206 70 4.6
20080 P236/58 LED SINGLE SUSPENSION 20081 P236/58 LED SUSPENSION + SINGLE MAINS CABLE 20087 COUPLING + CONT ROW SUSP CABLE 20088 THREE-PHASE THROUGH WIRING
Accessories to be ordered separately
Order code Description
IK05IP20
P236/P258 LEDCeiling, suspension
Ceiling or suspension fixture for installations in the tertiary sector. Char-acterized by excellent Dark Light anti-glare control, its use is particularlyindicated in all workplaces with video terminals where employees areexposed to artificial light for long periods.The exact emission of light on the work surface gives high character-istics of comfort and precision of the beam of light. A range of acces-sories is available for heavy wiring and for mechanical fixing in a con-tinuous row to obtain a civil system of the latest generation.Additional accessories are also available for integrating emergencylighting: the LED Inverter for lighting up part of the fixture in the eventof a black-out, or the LED Module for inserting in the seat provided.
GENERAL CHARACTERISTICS
Equivalent Power* 2× 36, 2× 58 W
Power supply 93–265 VAC 50/60 Hz176–250 VDC
Standard EN 60598-1, EN 60598-2-22(fundamental requirements),EN 62471 (photobiological hazard)
Protection grade IP20
Working temp. -20 °C ÷ +40 °C Mounting ceiling, suspension
Housing polyester powder coated sheet steelRAL 9003
Optic sheet metal Dark light type, opalinePMMA lenses
UGR <19
Luminance <1 000 cd/mq 65°
Colour Temperature 4 000 K
Driver SELV electronic SD (cos j ≥ 0.96) Electronic with intelligent dimming
MTBF control gear** 80 000 h Luminous flux >60 000 h (L80B20) maintenance**
Colour deviation 3 SDCM
* Equivalent power for comparison with fluorescent tube fixtures** At environmental reference temperature of 25 °C
SMARTDRIVER 5100lumen
UGR<19
Efficiency and dimming
The increase in luminous efficacy (lm/W) andthe useful life of the device may vary signifi-cantly according to the degree to which it isdimmed. Assuming an average level of 50%of the luminous flux, the following results areobtained with the P236/P258 LED:
Dimming 50 %Device duration +40 %Luminous efficiency +15 %
20102 BUILDING AUTOMATION CENTRAL UNIT 20124 BUILDING AUTOMATION CENTRAL UNIT WIFI 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE 15024 DALI MODULE 15034 1-10V MODULE
Building automation to be ordered separately Order code Description
15039 OPTICOM PHOTOSENSOR
Accessories supplied Order code Description
18
SPECIAL VARIANTS: COLOUR RENDERING ≥90, COLOUR TEMPERATURE ON REQUEST,SICURO 24 SLGS Contact the Beghelli sales network
DARK LIGHT WIDE OPTIC
20088 THREE-PHASE THROUGH WIRING CEILING to be ordered separately
20087 COUPLING+3-PHASE THROUGH WIRING SUSPENSION to be ordered separately
CONTINUOUS ROW MOUNTING
19350 INVERTER ECOLED SE 1N RM to be ordered separately
19341 MODULE EM LED AT SE 1N to be ordered separately
19342 MODULE EM LED LG SE/SA 1/3H to be ordered separately
19343 MODULE EM LED LGFM SE/SA 1/3H to be ordered separately
EMERGENCY WITH INVERTER ECOLED
IP40
20080 P236/58 LED SINGLE SUSP to be ordered separately
20081 P236/58 LED SUSP+SINGLE CABLE to be ordered separately
SUSPENDED MOUNTING
INVERTER
19358 INVERTER PLUG&LIGHT LED SE/SA 1H 20-60V to be ordered separately
19359 INVERTER PLUG&LIGHT LED SE/SA 3H 20-60V to be ordered separately
19355 INVERTER LED AT/LG 6W 55V 123H to be ordered separately
19372 INVERTER LED AT/LG 8W 55V 123H to be ordered separately
19390 INV EXT AT/LG 15W 55V 0,75-1-2-3-8H LTO to be ordered separately
19391 INV EXT AT/LG 15W 55V 0,75-1-2-3-8H LiFe to be ordered separately
EMERGENCY WITH LED INVERTER ATTR LG LGFM
INTELLIGENT PHOTOSENSOR
Autodimmer Natural Light
Autodimmer Dynamic Light
Smartphone Interface to control and set up system
MODULEMODULE
DOMOTIC
1. 2. 3.
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
19
P236/258 LED SmartDriver LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
2× 36 P236SD CEILING LED 2x36 SD 4000K 31 4 000 >80 36 140 4 800 4 000 111 A++ 1
2× 58 P258SD CEILING LED 2x58 SD 4000K 42 4 000 >80 47 140 6 160 5 100 109 A++ 1
CEIL
ING
AND
SUSP
ENDE
D
Polar Diagram
LG Inverters can be transformed in LGFM with the accessory code 19375
20
GENERAL CHARACTERISTICS
Equivalent Power* 2× 18 W, 2× 36 W, 2× 58 W, 2× 80 W
Power supply SD Version: 93–265 VAC 50/60 Hz
176–250 VDC
ED Version: 230 VAC ±10 % 50 Hz
Standard EN 60598-1, EN 60598-2-1,EN 60598-2-22 (fundamental
requirements), EN 62471 (Photobiological hazard)
Protection grade IP40****
Working temp. -20 ÷ +40 °C
Mounting ceiling, suspended mounting
Body galvanised Sheet steel painted with polyester powders RAL 9003
Lenses transparentní PMMA UGR <19
Screen micro-prismatic Tempered glass
Driver SD Version:Electronic SD (cos j≥ 0.96)Electronic intelligent dimming system
ED Version:Electronic ED (cos j≥ 0.95)
MTBF control gear** 80 000 h
Luminous flux >60 000 h (L80B20) maintenance**
Colour deviation 3 SDCM
* Equivalent power for comparison with fluorescent tubefixtures** At environmental reference temperature of 25 °C**** Degree refers to single luminaire configuration
W* • Dimensions (mm) • WeightL L1 B H max kg
2× 18 569 719 114 56 1.32× 36 1 138 1 288 114 56 2.52× 80 1 422 1 572 114 56 3.5
20102 BUILDING AUTOMATION CENTRAL UNIT 20124 BUILDING AUTOMATION CENTRAL UNIT WIFI 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE 15024 DALI MODULE 15034 1-10V MODULE
Building automation to be ordered separately Order code Description
20126 LENS FILA BOX
20127 LENS FILA SUSPENSION WIRE 1.5 m
20133 LENS FILA SUSPENSION WIRE 3 m
20134*** LENS FILA BRACKET BOX (only for T and cross configurations)
20135 LENS FILA 600 BLIND 5P
20136 LENS FILA 1200 BLIND 5P
20137 LENS FILA 1500 BLIND 5P
20138 LENS FILA POWER HEAD 5P
20139 LENS FILA CAP
20140 TERMINAL BLOCK 5P F P5.08
20141 TB 5P M 2.5 SF PHOENIX
20142 TB 2X5P F 2.5 SF PHOENIX
20144 LENS FILA CABLE 5P FEMALE
20145 LENS FILA CABLE 5P 2X FEMALE
20146 LENS FILA CABLE 5P MALE-FEMALE
20147 LF CABLE 5P FEMALE-2X FEMALE
Accessories to be ordered separately Order code Description
15040 OPTICOM PHOTOSENSOR ACCIAIO – COUPLER FOR COUPLING IN LINES – CEILING BRACKETS (2 pcs)
Accessories supplied Order code Description
This luminaire is designed for mounting end to end in continuous rowsusing corresponding connecting kit for mechanical connection andthrough wiring kit. It is perfect to illuminate big areas such as retail andsupermarkets.
Lens Fila LEDIndoor luminaire
SPECIAL VARIANTS: COLOUR TEMPERATURE ON REQUEST, COLOUR RENDERING ≥90Contact the Beghelli sales network
L1L
H
B
IP40 650°CIK05 UV-OIL
Quantity of lamps in a continuous row per phasePower N° lamps Cable section Power Line length m
W 230 VAC mm2 consumption 230 VAC
2× 18 – 2.5 27 –2× 36 46 2.5 54 522× 80 37 2.5 67 52
SMARTDRIVER
Efficiency and dimming
The increase in luminous efficacy (lm/W) andthe useful life of the device may vary signifi-cantly according to the degree to which it isdimmed. Assuming an average level of 50%of the luminous flux, the following results areobtained with the Lens Fila LED:
Dimming 50 %Device duration +40 %Luminous efficiency +10 %
INTELLIGENT PHOTOSENSOR
Autodimmer Natural Light
Autodimmer Dynamic Light
Smartphone Interface to control and set up system
MODULEMODULE
DOMOTIC
1. 2. 3.
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
240
360
480
600
21
CEIL
ING
AND
SUSP
ENDE
D
Polar Diagram
Lens Fila LED SmartDriver LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
2× 18 LF218SD LENS FILA LED 2x18 SD 27 4 000 ≥80 30 36 4 700 4 000 133 A++ 1
2× 36 LF236SD LENS FILA LED 2x36 SD 54 4 000 ≥80 60 72 9 300 8 000 133 A++ 1
2× 80 LF280SD LENS FILA LED 2x80 SD 67 4 000 ≥80 74 90 11 600 9 900 133 A++ 1
Lens Fila LED Eco Driver LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
2× 18 LF218ED LENS FILA LED 2x18 ED 24 4 000 ≥80 27 36 4 200 3 600 135 A++ 1
2× 36 LF236ED LENS FILA LED 2x36 ED 49 4 000 ≥80 54 72 8 600 7 300 135 A++ 1
2× 80 LF280ED LENS FILA LED 2x80 ED 60 4 000 ≥80 67 90 10 500 9 000 135 A++ 1
INVERTER
19358 INVERTER PLUG&LIGHT LED SE/SA 1H 20-60V to be ordered separately
19359 INVERTER PLUG&LIGHT LED SE/SA 3H 20-60V to be ordered separately
19355 INVERTER LED AT/LG 6W 55V 123H to be ordered separately
19372 INVERTER LED AT/LG 8W 55V 123H to be ordered separately
19390 INV EXT AT/LG 15W 55V 0,75-1-2-3-8H LTO to be ordered separately
19391 INV EXT AT/LG 15W 55V 0,75-1-2-3-8H LiFe to be ordered separately
EMERGENCY WITH LED INVERTER ATTR LG LGFM
LG Inverters can be transformed in LGFM with the accessory code 19375
20126 LENS FILA BOX
LENS FILA BOX
20138 LENS FILA POWER HEAD 5P
LENS FILA POWER HEAD 5P
20139 LENS FILA CAP
LENS FILA CAP
20134 LENS FILA BRACKET BOX
LENS FILA BRACKET BOX
20135 LENS FILA 600 BLIND 5P
20136 LENS FILA 1200 BLIND 5P
20137 LENS FILA 1500 BLIND 5P
LENS FILA 600-1200-1500 BLIND 5P
117
mm
50 mm***
***
Code • Dimensions (mm) • WeightL L1 B H max kg
20135 569 719 114 56 1.320136 1 138 1 288 114 56 2.520137 1 422 1 572 114 56 3.5
Lens Fila LED head and joint connections
L1L
H
B
22
20142 TB 2X5P F 2.5 SF PHOENIX
TB 2X5P F 2.5 SF PHOENIX
20144 LENS FILA CABLE 5P FEMALE
LENS FILA CABLE 5P FEMALE
20145 LENS FILA CABLE 5P 2X FEMALE
LENS FILA CABLE 5P 2X FEMALE
20147 LF CABLE 5P FEMALE-2X FEMALE
LF CABLE 5P FEMALE-2X FEMALE
20146 LENS FILA CABLE 5P MALE-FEMALE
LENS FILA CABLE 5P MALE-FEMALE
20140 TERMINAL BLOCK 5P F P5.08
TERMINAL BLOCK 5P F P5.08
20141 TB 5P M 2.5 SF PHOENIX
TB 5P M 2.5 SF PHOENIX
23
CEIL
ING
AND
SUSP
ENDE
D
24
20138F
20139F
2F
M
230V
LF28
0
2F
M
LF28
0
2F
M
LF28
0
2F
MLF
280
20139F
20139F
M
2F
LF28
0
2F
M
LF28
0
2F
MLF
280
2F
M
LF28
0F F 2
230V20147
20138F
20139F
2F
M
230V
LF28
0
20139F
20139F
M
2F
20140F
230VLF28
0Different components to form light-lines and structures
SINGLE LUMINAIREPOWERED AT THE SIDE
SINGLE LUMINAIREPOWERED IN THE MIDDLE
LIGHT-LINE CONFIGURATIONPOWERED AT THE SIDE
LIGHT-LINE CONFIGURATIONPOWERED IN THE MIDDLE
25
20138
20139
2F
LF28
0
M
2FM LF280
M
F
230V20146
20126
20139
20139
2F
LF28
0
M
M2F LF280
20126
F F 2
230V20147
90°L CONFIGURATIONPOWERED AT THE SIDE
90°L CONFIGURATIONPOWERED IN THE MIDDLE
CEIL
ING
AND
SUSP
ENDE
D
LEGEND
F FEMALE CONNECTOR
2F DOUBLE FEMALE CONNECTOR
M MALE CONNECTOR
SUPPLIED BRACKET TO BE REMOVED
26
20138
20139
2F LF280 M
20139
2FLF280M
2F
M
LF280
20126
20134
F
2F
M 1x201411x201442x20145
230V
Different components to form light-lines and structures
X CONFIGURATIONPOWERED AT THE SIDE
27
20138
20139
2F LF280 M
20139
2FLF280M
2F
M
LF280
20126
20134
2F
2F
M 1x201412x20145
230V
X CONFIGURATIONPOWERED AT THE SIDE
CEIL
ING
AND
SUSP
ENDE
D
LEGEND
F FEMALE CONNECTOR
2F DOUBLE FEMALE CONNECTOR
M MALE CONNECTOR
SUPPLIED BRACKET TO BE REMOVED
BRACKET NEEDED TO COMPLETEMOUNTING (COD. 20134)
20138
20139
2F LF280 M
20139
2FLF280M
2F
M
LF280
2012
6
2x20
134
2F
F
2F
M 1x201411x201442x20145
230V
20139
2F
M
LF280
28
Different components to form light-lines and structures
X CONFIGURATIONPOWERED AT THE SIDE
20139
20139
2F LF280 M
20139
2FLF280M
2F
M
LF280
2012
6
2x20
134
20139
2F
M
LF280
2F
F
2F
M 1x201413x20145
230V
29
X CONFIGURATIONPOWERED IN THE MIDDLE
CEIL
ING
AND
SUSP
ENDE
D
LEGEND
F FEMALE CONNECTOR
2F DOUBLE FEMALE CONNECTOR
M MALE CONNECTOR
SUPPLIED BRACKET TO BE REMOVED
BRACKET NEEDED TO COMPLETEMOUNTING (COD. 20134)
GENERAL CHARACTERISTICS
Equivalent Power* 2× 18, 2× 80 W
Power supply 93–265 VAC 50/60 Hz176–250 VDC
Standard EN 60598-1,EN 60598-2-1,EN 60598-2-22 (fundamental
requirements), EN62471 (Photobiological hazard)
Protection grade IP40
Working temp. -20 °C ÷ +40 °C
Mounting suspension with steel cable, suspension with chain, ceiling-mounting with bracket rail on ceiling or bracket rail with special slats
Body extruded aluminium RAL 9010
Optic transparent polyammide PMMA
Power supply Electronic SD (cos j ≥ 0.96) Electronic intelligent dimming system
MTBF Control gear** 80 000 h
Luminous flux >60 000 (L80B20) maintenance**
Colour deviation 3 SDCM
* Equivalent power for comparison with fluorescent tube fixtures** At environmental reference temperature of 25 °C
SMARTDRIVER 9000lumen
2× 80 1 416 73 80 3.6 2× 18 568 73 80 1.7
• Dimensions (mm) • Weight W L B H kg
20102 BUILDING AUTOMATION CENTRAL UNIT 20124 BUILDING AUTOMATION CENTRAL UNIT WIFI 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE 15024 DALI MODULE 15034 1-10V MODULE 15035 OPTICOM AUTODIMMER SENSOR RAIL
Building automation to be ordered separately Order code Description
Continuous-row system with pre-wired modular track. A single sup-porting track is the basis for installing both the three-phase binary andthe specific lighting module, available with 7 different optics to meetmost lighting needs in small and large scale retail, offices and industrialapplications. The pre-wiring of the channel uses 7 poles: 3 phases –Neutral-Pet (earth) – Emergency lighting – DALI BUS. Every compo-nents is made of extruded aluminium with high-precision inserts andmechanical locking. Guaranteeing extremely quick installation, therange allows scope for every level of system complexity and any typeof continuous-row routing.The operation of the Opticom system requires a radio module andsmart photosensor, which can work either in auto-dimming mode ordirectly commanded via a smartphone to adjust the brightness intensitywith the exposed device. LED Rail System can also be controlled viaWiFi, thanks to the optional domotic control unit that also enables allthe operating modes envisaged by the Smart Driver (SD) protocol.
SPECIAL VARIANTS: COLOUR RENDERING ≥90, COLOUR TEMPERATURE ON REQUEST, IP54 VERSION ON REQUESTContact the Beghelli sales network
IP40 IK05 650°C
30
Rail System LEDPre-wired supporting profile + SD lighting module
INVERTER
19358 INVERTER PLUG&LIGHT LED SE/SA 1H 20-60V to be ordered separately
19359 INVERTER PLUG&LIGHT LED SE/SA 3H 20-60V to be ordered separately
19355 INVERTER LED AT/LG 6W 55V 123H to be ordered separately
19372 INVERTER LED AT/LG 8W 55V 123H to be ordered separately
19390 INV EXT AT/LG 15W 55V 0,75-1-2-3-8H LTO to be ordered separately
19391 INV EXT AT/LG 15W 55V 0,75-1-2-3-8H LiFe to be ordered separately
EMERGENCY WITH LED INVERTER ATTR LG LGFM
LG Inverters can be transformed in LGFM with the accessory code 19375
INTELLIGENT PHOTOSENSOR
Autodimmer Natural Light
Autodimmer Dynamic Light
Smartphone Interface to control and set up system1. 2. 3.
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
CEILING MOUNTING
14536 RAIL SURFACE BRACKET to be ordered separately
7-POLE ASSEMBLY SYSTEM
14530 RAIL POWER 7 WIRE to be ordered separately
SUSPENDED MOUNTING
14534 RAIL BRACKET SUSPENS WIRE 3M to be ordered separately
14535 RAIL BRACKET SUSPENS CHAIN 3M to be ordered separately
CEILING MOUNTING
14537 RAIL CEILING BRACKET to be ordered separately
COVERS
14533 RAIL COVER PC 1500 to be ordered separately
14539 RAIL COVER PC 600 to be ordered separately
CLOSURE HEAD
14532 RAIL HEAD to be ordered separately
14580 RAIL HEAD DOUBLE ARC to be ordered separately
MODULEMODULE
DOMOTIC
31
CEIL
ING
AND
SUSP
ENDE
D
32
1Rail System Led is an advanced track system with
a 1 host of possible variant that make it extremely
versatile, suitable for all type of use
Key elements of the system:
1 Suspension and ceiling mounting elements
2 Pre-wired supporting profile(0.6 m, 1.5 m)
3 LED SD lighting module(0.6 m, 1.5 m)
4 Electrified tri-phase rail(1.5 m)
5 Powered head
6 End head
7 Connection modules:2, 3, 4 way joints
8 Module (0.6 m)
Base components
Electrified tri-phase railor recessed installation within
the supporting profile, can
accommodate floodlights of
various power levels
1
33
2 3
12
3
4
6
7
8
5
Pre-wired supporting profileequipped with a quick-connect system
for speedy installation. Mounted before
the other components, comprises the
supporting structure of the system
2 Wired LED SD lighting moduleAvailable with 7 different optics, with
achoice of concentrator, diffusor,
asymmetrical and symmetrical options.
The quick-locking system is also equipped
with an electrical connection
3
CEIL
ING
AND
SUSP
ENDE
D
2× 80 1 416 68 37 1.7 2× 18 568 68 37 0.8
Power • Dimensions (mm) • Weight W* L B H kg
L
B
H
SD lighting module SmartDriver Power*
W
2× 802× 802× 802× 802× 802× 802× 802× 182× 182× 182× 182× 182× 182× 18
SUSPENDED MOUNTING FIXING SYSTEM
* The power consumption has an auto derating to the power indicated in parenthesys if the product is powered by voltage less than 110 VAC.
34
LED Colour Colour Power consumption Flux of LEDs Flux of EnergyOrder code Description Optic Power W Temp. K rendering max W N° LED lm (Tj=25°C) fixture lm lm/W Class Packaging
14500 RAIL LED 2x80 1500 WD SD 4K Wide (90°) 59 4 000 >80 65 (56*) 288 10 000 9 000 139 A++ 1/10 14501 RAIL LED 2x80 1500 SP SD 4K Sharp (25°) 59 4 000 >80 65 (56*) 288 10 000 9 000 139 A++ 1/10 14502 RAIL LED 2x80 1500 NR SD 4K Narrow (60°) 59 4 000 >80 65 (56*) 288 10 000 9 000 139 A++ 1/10 14503 RAIL LED 2x80 1500 DS SD 4K Double Asymm 59 4 000 >80 65 (56*) 288 10 000 9 000 139 A++ 1/10 14504 RAIL LED 2x80 1500 RS SD 4K Right Asymm 59 4 000 >80 65 (56*) 288 10 000 9 000 139 A++ 1/10 14505 RAIL LED 2x80 1500 LS SD 4K Left Asymm 59 4 000 >80 65 (56*) 288 10 000 9 000 139 A++ 1/10 14568 RAIL LED 2x80 1500 DA SD 4K (120°) 59 4 000 >80 65 (56*) 288 10 000 9 000 139 A++ 1/10 14540 RAIL LED 2x18 600 WD SD 4K Wide (90°) 23 4 000 >80 26 144 4 000 3 600 140 A++ 1/10 14541 RAIL LED 2x18 600 SP SD 4K Sharp (25°) 23 4 000 >80 26 144 4 000 3 600 140 A++ 1/10 14542 RAIL LED 2x18 600 NR SD 4K Narrow (60°) 23 4 000 >80 26 144 4 000 3 600 140 A++ 1/10 14543 RAIL LED 2x18 600 DS SD 4K Double Asymm 23 4 000 >80 26 144 4 000 3 600 140 A++ 1/10 14544 RAIL LED 2x18 600 RS SD 4K Right Asymm 23 4 000 >80 26 144 4 000 3 600 140 A++ 1/10 14545 RAIL LED 2x18 600 LS SD 4K Left Asymm 23 4 000 >80 26 144 4 000 3 600 140 A++ 1/10 14569 RAIL LED 2x18 600 DA SD 4K (120°) 23 4 000 >80 26 144 4 000 3 600 140 A++ 1/10
SD lighting moduleSD wired LED device
7 Optics, 7 different Polar diagrams
C0-C180 C90-C270
105
90
75
60
45
3015 0 15
cd/klm
300
600
450
150
Rail System80W – right asymmetric
Order code 14504
C0-C180 C90-C270
105
90
75
60
45
3015 0 15
cd/klm
160
320
240
80
Rail System80W – 120°
Order code 14568
C0-C180 C90-C270
105
90
75
60
45
30
15 0 15
cd/klm
160
320
240
80
Rail System80W – 90°
Order code 14500
C0-C180 C90-C270
105
90
75
60
45
3015 0 15
cd/klm
800
1600
1200
400
Rail System80W – 25°
Order code 14501
C0-C180 C90-C270
105
90
75
60
45
3015 0 15
cd/klm
300
600
450
150
Rail System80W – left asymmetric
Order code 14505
C0-C180 C90-C270
105
90
75
60
45
3015 0 15
cd/klm
400
800
600
200
Rail System80W – 60°
Order code 14502
C0-C180 C90-C270
105
90
75
60
45
3015 0 15
cd/klm
300
600
450
150
Rail System80W – double asymm.
Order code 14503
ASYMMETRICRIGHT BEAM
RIGHT LEFT
ASYMMETRICLEFT BEAM
35
CEIL
ING
AND
SUSP
ENDE
D
L B
EC Rail
L B
CC Rail
2× 18 570 2.5 135 67 75 37 2× 80 1 416 2.5 54 27 75 37
Power Length Cable section Quantity of lamps Quantity of lamps Length of line (m) Length of line (m) W mm mm2 230 VAC 110 VAC 230 VAC 110 VAC
3 000 mm max. 100–800 mm
The electrified rail consists of 3 phases + 2 that can be used to power the emergency lighting system or a BUS (Dali or Logica)
To power a continuous row system from above, only one DC rail is required, which will supply power to all the EC rails in both directions
Quantity of lamps in a continuous row per phase
Spacing of fixing points
EC rail – supporting profile with lateral power supply
600 14516 RAIL 600 7 WIRE EC 2.5 570 68.4 0.7 1/10 1 500 14510 RAIL 1500 7 WIRE EC 2.5 1 416 68.4 1.4 1/10 3 000 14512 RAIL 3000 7 WIRE EC 2.5 2 832 68.4 2.8 1/10 4 500 14514 RAIL 4500 7 WIRE EC 2.5 4 248 68.4 4.2 1/10
Model Order code Description Cable section • Dimensions (mm) • Weight Packaging mm mm2 L B kg
CC rail – supporting profile with central power supply (from above)
1 500 14511 RAIL 1500 7 WIRE CC 2.5 1 416 68.4 1.4 1/10 3 000 14513 RAIL 3000 7 WIRE CC 2.5 2 832 68.4 2.8 1/10 4 500 14514 RAIL 4500 7 WIRE CC 2.5 4 248 68.4 4.2 1/10
Model Order code Description Cable section • Dimensions (mm) • Weight Packaging mm mm2 L B kg
36
Equipped with a quick connection system for extremely fast installation.Mounted prior to the other components, it forms the supporting struc-ture of the system. Continuous-row installation.
Pre-wired supporting profileStructure component
L
B
H
Electrified binary module
14531 SPOT RAIL 1500 7 WIRE 1/1014538 SPOT RAIL 600 7 WIRE 1/10
Order code Description Packaging
Smart photosensor
15035 RAIL AUTODIMMER OPTICOM 600 1
Order code Description Packaging
1 416 68 21 1.7
• Dimensions (mm) • Weight L B H kg
568 68 21 0.7
• Dimensions (mm) • Weight L B H kg
L
B
H
CONTINUOUS ROW MOUNTING
For assembling three-phase spotlights of the ZOOM LED or EXPOLED type
The smart photosensor module allows to use Opticom, AutodimmerNatural Light and Dynamic Light technologies on all the Rail modulesassociated with it. These modules must be combined with the domoticradio module (15022).
CEIL
ING
AND
SUSP
ENDE
D
37
Electrified binary moduleStructure component
Smart photosensorStructure component
150
481
240
331
240
14521 RAIL L INL OUTR 7 WIRE
150 177
91
68
14520 RAIL POWERED HEAD 7 WIRE
331
240
481
240 150
14522 RAIL L INR OUTL 7 WIRE
240
390
240 150
150
2
40 481
14524 RAIL T 1INL 2OUTR 7 WIRE
481
240 150 4
81
240
1
50
240
14525 RAIL T 1INR 2OUTL 7 WIRE
X JOINT
T JOINT
L JOINT
150 240
481
150 240 481
240
481
240 150
14528 RAIL X 1 IN 3OUT 7 WIRE
390
150 240
240 150
390
390
240 150
390
240 150
14529 RAIL X POWER 4OUT 7 WIRE
RAIL SYSTEM HEAD
38
Rail system head and joint connections
481
240 150
481
240 150
14523 RAIL L POWER 2OUT 7 WIRE
390 390
240 240
240
150 150
14526 RAIL T 1INC 2OUTS 7 WIRE
150
390
150
390
150
390
240
240 240
14527 RAIL T POWER 3OUT 7 WIRE
39
CEIL
ING
AND
SUSP
ENDE
D
Atomic TOP LED is a luminaire of a new generation characterized bya very good lighting efficiency, which ensures the high comfort of illu-mination. The luminaire is suitable for lighting in restaurants, shops, ho-tels, finance houses, offices, classrooms, corridors and stairways.Housing is made of anodized aluminium profile with steel endings.Equipped with frosted acrylic diffuser or micro-prism optic system. The luminaire equipped with a microprismatic diffuser ensures veryhigh efficiency and reduces the glare value of UGR below 19. It provi-des a very good visual comfort with no glare. It fits perfectly in offices,conference and training rooms, lecture halls as well as exhibition spa-ces and showrooms. Available with an emergency LED inverter for emergency usage.Luminaires for separate mounting are available in IP40, luminaires forcoupling in lines in IP20.
IP40IP20
GENERAL CHARACTERISTICS
Power supply SD Version: 93–265 VAC 50/60 Hz176–250 VDC
ED Version: 230 VAC ±10 % 50 Hz
Standard EN 60598-1, EN 60598-2-1,EN 60598-2-22 (fundamental require-ments), EN 62471 (photobiologicalhazard)
Protection grade IP20, IP40
Working temp. -20 °C ÷ +40 °C
Mounting recessed mounting in plaster ceilingsSEPARATE (endings are components ofthe luminaire), recessed mounting inplaster ceilings COUPLING IN LINES(endings to be ordered separately)
Body anodized aluminium profile and steelendings in grey
Diffuser opal or microprismatic optics
Driver SD Version:SmartDriver (cos j ≥ 0.96)ED Version:Eco Driver (cos j ≥ 0.95)
MTBF Control gear** 80 000 h
Luminous flux >70 000 h (L80B20) maintenance**
Colour deviation 3 SDCM
** At environmental reference temperature of 25 °C
15039 OPTICOM PHOTOSENSOR
Accessories supplied (SD version) Order code Description
20102 BUILDING AUTOMATION CENTRAL UNIT 20124 BUILDING AUTOMATION CENTRAL UNIT WIFI 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE 15024 DALI MODULE 15034 1-10V MODULE
Building automation to be ordered separately Order code Description
Efficiency and dimming
The increase in luminous efficacy (lm/W) andthe useful life of the device may vary signifi-cantly according to the degree to which it isdimmed. Assuming an average level of 50%of the luminous flux, the following results areobtained with the Atomic LED:
Dimming 50 %Device duration +40 %Luminous efficiency +15 %
SPECIAL VARIANTS: COLOUR RENDERING ≥90, COLOUR TEMPERATURE ON REQUESTContact the Beghelli sales network
SMARTDRIVER
B
H
L
Ĺ
Atomic TOP LEDRecessed LED luminaire – separate / coupling inlines (dimensional options 1.2 m/1.5 m)
IK05
W • Dimensions (mm) • WeightL’ (profile without end.) L (incl. endings) B H kg
1.2 m 1 147 1 167 77 81.5 2.8 1.5 m 1 432 1 452 77 81.5 3.4
SD version
ED version
INVERTER
19358 INVERTER PLUG&LIGHT LED SE/SA 1H 20-60V to be ordered separately
19359 INVERTER PLUG&LIGHT LED SE/SA 3H 20-60V to be ordered separately
19355 INVERTER LED AT/LG 6W 55V 123H to be ordered separately
19356 INVERTER LED LGFM 6W 55V 123H to be ordered separately
EMERGENCY WITH LED INVERTER ATTR LG LGFM
UGR<19
Length “L” including endingsLength “L’” profile without endings
65
L*
Recess hole for SEPARATE mounting65 × 1155 for version 1.265 × 1440 for version 1.5
Recess hole for COUPLING IN LINESWidth of the recess hole is always 65 mm.L* (length of the recess hole) = L' (length of the profile from table below) * N (number of lumina-ires) + 8 mmExample – length of the recess hole for 3 luminaires version 1.2 coupling in lines will be calculatedas follows: L* = 1147(L') * 3(N) + 8 = 3449 mm
99-0297 END CAP (only for COUPLING IN LINES)
Accessories to be ordered separately
Order code Description
– 2× HOLDERS for mounting in plaster ceiling– 2× COUPLER (only for COUPLING IN LINES)
Accessories supplied
Order code Description
40
150
300
450
600
0°15° 30°15°30°
45°45°
60°60°
75°75°
90°90°
105°105° 180°
cd/klmC0 - C80 C90 - C270
Polar Diagram
INTELLIGENT PHOTOSENSOR
Autodimmer Natural Light
Autodimmer Dynamic Light
Smartphone Interface to control and set up system
MODUL
MODULE
DOMOTIC
1. 2. 3.
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
Atomic TOP LED SmartDriver
LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
A61-10R61CWSD Atomic TOP LED SD 4000K 1.2m 19 4 000 >80 21 96 2 600 2 400 114 A+ 1
A61-10R62CWSD Atomic TOP LED SD 4000K 1.2m 26 4 000 >80 29 96 3 600 3 300 114 A+ 1
A61-10R63CWSD Atomic TOP LED SD 4000K 1.5m 23 4 000 >80 26 120 3 300 3 000 115 A+ 1
A61-10R64CWSD Atomic TOP LED SD 4000K 1.5m 31 4 000 >80 35 120 4 400 4 000 114 A+ 1
Separate mounting
LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
A61-10R61PCWSD Atomic TOP LED SD 4000K 1.2m 19 4 000 >80 21 96 2 600 2 400 115 A+ 1
A61-10R62PCWSD Atomic TOP LED SD 4000K 1.2m 26 4 000 >80 29 96 3 600 3 300 115 A+ 1
Coupling in lines
Atomic TOP LED Eco Driver
LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
A61-10R61CWED Atomic TOP LED 4000K 1.2m 18 4 000 >80 20 96 2 500 2 300 115 A+ 1
A61-10R62CWED Atomic TOP LED 4000K 1.2m 25 4 000 >80 28 96 3 500 3 200 114 A+ 1
A61-10R63CWED Atomic TOP LED 4000K 1.5m 21 4 000 >80 24 120 3 000 2 800 117 A+ 1
A61-10R64CWED Atomic TOP LED 4000K 1.5m 33 4 000 >80 36 120 4 600 4 200 117 A+ 1
Separate mounting
LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
A61-10R61PCWED Atomic TOP LED 4000K 1.2m 18 4 000 >80 20 96 2 500 2 300 115 A+ 1
A61-10R62PCWED Atomic TOP LED 4000K 1.2m 25 4 000 >80 28 96 3 500 3 200 114 A+ 1
Coupling in lines
W – Microprismatic diffuser – UGR<19*
* UGR < 19 is the indicative value of glare as stated by relevant EU-standards chart method for interior application. The real glare value is always given by the actual mutual positions of observer and glaresource (luminaire) and concurrently, by actual parameters of the whole lighting system installed. This luminaire glare UGR < 19 is performed just in C90-C270 plane at any situation. In case of a particularproject, we can provide Dialux calculation results of actual UGR value(s) in other planes on request.
41
RECE
SSED
0°15° 30°15°30°
45°45°
60°60°
75°75°
90°90°
105°105° 180°
cd/klmC0 - C80 C90 - C270
100
200
300
400
Polar Diagram
INTELLIGENT PHOTOSENSOR
Autodimmer Natural Light
Autodimmer Dynamic Light
Smartphone Interface to control and set up system
MODUL
MODULE
DOMOTIC
1. 2. 3.
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
Atomic TOP LED SmartDriver
LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
A61-10R61CZSD Atomic TOP LED SD 4000K 1.2m 22 4 000 >80 25 96 3 100 2 500 100 A+ 1
A61-10R62CZSD Atomic TOP LED SD 4000K 1.2m 31 4 000 >80 34 96 4 300 3 400 100 A+ 1
A61-10R63CZSD Atomic TOP LED SD 4000K 1.5m 28 4 000 >80 31 120 4 000 3 150 102 A+ 1
A61-10R64CZSD Atomic TOP LED SD 4000K 1.5m 38 4 000 >80 42 120 5 300 4 250 101 A+ 1
Separate mounting
LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
A61-10R61PCZSD Atomic TOP LED SD 4000K 1.2m 22 4 000 >80 25 96 3 100 2 500 100 A+ 1
A61-10R62PCZSD Atomic TOP LED SD 4000K 1.2m 31 4 000 >80 34 96 4 300 3 400 100 A+ 1
Coupling in lines
Atomic TOP LED Eco Driver
LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
A61-10R61CZED Atomic TOP LED 4000K 1.2m 21 4 000 >80 24 96 3 000 2 400 100 A+ 1
A61-10R62CZED Atomic TOP LED 4000K 1.2m 33 4 000 >80 36 96 4 600 3 650 101 A+ 1
A61-10R63CZED Atomic TOP LED 4000K 1.5m 29 4 000 >80 32 120 4 000 3 200 100 A+ 1
A61-10R64CZED Atomic TOP LED 4000K 1.5m 38 4 000 >80 42 120 5 300 4 200 100 A+ 1
Separate mounting
LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
A61-10R61PCZED Atomic TOP LED 4000K 1.2m 21 4 000 >80 24 96 3 000 2 400 100 A+ 1
A61-10R62PCZED Atomic TOP LED 4000K 1.2m 33 4 000 >80 36 96 4 600 3 650 101 A+ 1
Coupling in lines
Z – Opal diffuser – Homogenous
42
A typical installation of Atomic TOP LED inoffices and classrooms, where glare level(UGR <19) is a priority for those who usepersonal computers. However, it is equallyimportant to ensure that a sufficient level oflight is diffused throughout the environment.
43
Atomic LED is characterized by a very good lighting efficiency, whichensures the high comfort of illumination. The luminaire is suitable forlighting in restaurants, shops, hotels, finance houses, corridors andstairways. Housing is made of anodized aluminium profile with steelendings. Equipped with frosted acrylic diffuser or micro-prism opticsystem. Available with an emergency LED inverter for emergencyusage.
44
IP40GENERAL CHARACTERISTICS
Equivalent Power* 2× 36, 2× 58, 2× 80 W
Power supply SD Version: 93–265 VAC 50/60 Hz176–250 VDC
ED Version: 230 VAC ±10 % 50 Hz
Standard EN 60598-1, EN 60598-2-2,EN 60598-2-22 (fundamental require-ments), EN 62471 (photobiological
hazard)
Protection grade IP40
Working temp. -20 °C ÷ +40 °C
Mounting recessed mounting in plaster ceilings SEPARATE (endings are components of the luminaire), recessed mounting in plaster ceilings COUPLING IN LINES (endings to be ordered separately)
Body anodized aluminium profile and steel endings in grey
Diffuser frosted acrylic or microprismatic optics
Driver SD Version:SmartDriver (cos j ≥ 0.96)
ED Version:Eco Driver (cos j ≥ 0.95)
MTBF Control gear** 65 000 h Luminous flux >60 000 h (L80B20) maintenance**
Colour deviation 3 SDCM
* Equivalent power for comparison with fluorescent tube fixtures** At environmental reference temperature of 25 °C
15039 OPTICOM PHOTOSENSOR
Accessories supplied (SD version) Order code Description
20102 BUILDING AUTOMATION CENTRAL UNIT 20124 BUILDING AUTOMATION CENTRAL UNIT WIFI 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE 15024 DALI MODULE 15034 1-10V MODULE
Building automation to be ordered separately Order code Description
Efficiency and dimming
The increase in luminous efficacy (lm/W) andthe useful life of the device may vary signifi-cantly according to the degree to which it isdimmed. Assuming an average level of 50%of the luminous flux, the following results areobtained with the Atomic LED:
Dimming 50 %Device duration +40 %Luminous efficiency +15 %
99-0124 ENDING FOR RECESSED VERSION COUPLING IN LINES (1 pc) 99-0125 COUPLER FOR LUMINAIRES COUPLING IN LINES
Accessories to be ordered separately
Order code Description
SPECIAL VARIANTS: COLOUR RENDERING ≥90, COLOUR TEMPERATURE ON REQUESTContact the Beghelli sales network
SMARTDRIVER
B
H
L
Ĺ
Atomic LEDRecessed LED luminaire – separate / coupling in lines(dimensional options 1.2 m/1.5 m/2.3 m/2.9 m)
IK05
W • Dimensions (mm) • Weight L’ (profile without end.) L (incl. endings) B H kg
2× 36 SD 1 177 1 197 77 56 2.5 2× 58 SD 1 177 1 197 77 56 2.5 2× 80 SD 1 467 1 487 77 56 4.0(2×) 2× 36 SD 2 348 2 368 77 56 5.0(2×) 2× 80 SD 2 970 2 990 77 56 8.0
Version (2×) 2× 36 SD and (2×) 2× 80 SD include 2× SD and 2× OPTICOM.
SmartDriver
W • Dimensions (mm) • Weight L’ (profile without end.) L (incl. endings) B H kg
2x36 1 156 1 176 77 56 2.5 2x58 1 156 1 176 77 56 2.5 2x80 1 446 1 466 77 56 4.0 (2×) 2× 36 2 306 2 326 77 56 5.0 (2×) 2× 80 2 928 2 948 77 56 8.0
Eco Driver
SD version
ED version
45
INTELLIGENT PHOTOSENSOR
Autodimmer Natural Light
Autodimmer Dynamic Light
Smartphone Interface to control and set up system
MODULEMODULE
DOMOTIC
1. 2. 3.
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
125 250 375 500
[ l ] cd/1 000 lm C0 – C180 C90 – C270
Polar Diagram
Atomic LED SmartDriver
LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
2× 36 A11-10016CMSD Atomic LED 2x36 SD 4000K 1.2m 36 4 000 >80 40 96 4 180 3 483 87 A+ 1
2× 36 A11-10016CWSD Atomic LED 2x36 SD 4000K 1.2m 36 4 000 >80 40 96 4 180 3 430 86 A+ 1
2× 58 A11-10017CMSD Atomic LED 2x58 SD 4000K 1.2m 54 4 000 >80 59 144 6 280 5 235 89 A+ 1
2× 58 A11-10017CWSD Atomic LED 2x58 SD 4000K 1.2m 54 4 000 >80 59 144 6 280 5 170 88 A+ 1
2× 80 A11-10032CMSD Atomic LED 2x80 SD 4000K 1.5m 55 4 000 >80 63 180 7 970 6 640 105 A+ 1
2× 80 A11-10032CWSD Atomic LED 2x80 SD 4000K 1.5m 55 4 000 >80 63 180 7 970 6 730 107 A+ 1
(2×) 2× 36 A11-10029CMSD Atomic LED (2x)2x36 SD 4000K 2.3m 72 4 000 >80 80 192 8 360 7 000 88 A+ 1
(2×) 2× 36 A11-10029CWSD Atomic LED (2x)2x36 SD 4000K 2.3m 72 4 000 >80 80 192 8 360 6 860 86 A+ 1
(2×) 2× 80 A11-10030CMSD Atomic LED (2x)2x80 SD 4000K 2.9m 115 4 000 >80 128 360 15 950 13 280 104 A+ 1
(2×) 2× 80 A11-10030CWSD Atomic LED (2x)2x80 SD 4000K 2.9m 115 4 000 >80 128 360 15 950 13 460 105 A+ 1
LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
2× 36 A11-10025CMSD Atomic LED 2x36 SD 4000K 1.2m 36 4 000 >80 40 96 4 180 3 483 87 A+ 1
2× 36 A11-10025CWSD Atomic LED 2x36 SD 4000K 1.2m 36 4 000 >80 40 96 4 180 3 430 86 A+ 1
2× 58 A11-10026CMSD Atomic LED 2x58 SD 4000K 1.2m 54 4 000 >80 59 144 6 280 5 235 89 A+ 1
2× 58 A11-10026CWSD Atomic LED 2x58 SD 4000K 1.2m 54 4 000 >80 59 144 6 280 5 170 88 A+ 1
Atomic LED Eco Driver
LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
2× 36 A11-10016CM Atomic LED 2x36 4000K 1.2m 36 4 000 >80 40 96 4 180 3 483 87 A+ 1
2× 36 A11-10016CW Atomic LED 2x36 4000K 1.2m 36 4 000 >80 40 96 4 180 3 430 86 A+ 1
2× 58 A11-10017CM Atomic LED 2x58 4000K 1.2m 54 4 000 >80 59 144 6 280 5 235 89 A+ 1
2× 58 A11-10017CW Atomic LED 2x58 4000K 1.2m 54 4 000 >80 59 144 6 280 5 170 88 A+ 1
2× 80 A11-10032CM Atomic LED 2x80 4000K 1.5m 69 4 000 >80 77 180 9 420 7 850 102 A+ 1
2× 80 A11-10032CW Atomic LED 2x80 4000K 1.5m 69 4 000 >80 77 180 9 420 7 740 100 A+ 1
(2×) 2× 36 A11-10029CM Atomic LED (2x)2x36 4000K 2.3m 72 4 000 >80 80 192 8 360 7 000 88 A+ 1
(2×) 2× 36 A11-10029CW Atomic LED (2x)2x36 4000K 2.3m 72 4 000 >80 80 192 8 360 6 860 86 A+ 1
(2×) 2× 80 A11-10030CM Atomic LED (2x)2x80 4000K 2.9m 138 4 000 >80 154 360 18 840 15 700 102 A+ 1
(2×) 2× 80 A11-10030CW Atomic LED (2x)2x80 4000K 2.9m 138 4 000 >80 154 360 18 840 15 480 100 A+ 1
Separate mounting
Separate mounting
Coupling in lines
LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
2× 36 A11-10025CM Atomic LED 2x36 4000K 1.2m 36 4 000 >80 40 96 4 180 3 483 87 A+ 1
2× 36 A11-10025CW Atomic LED 2x36 4000K 1.2m 36 4 000 >80 40 96 4 180 3 430 86 A+ 1
2× 58 A11-10026CM Atomic LED 2x58 4000K 1.2m 54 4 000 >80 59 144 6 280 5 235 89 A+ 1
2× 58 A11-10026CW Atomic LED 2x58 4000K 1.2m 54 4 000 >80 59 144 6 280 5 170 88 A+ 1
Coupling in lines
* Equivalent power for comparison with fluorescent tube fixtures; M – frosted acrylic diffuser, W – micro-prism optic system
RECE
SSED
INVERTER
19358 INVERTER PLUG&LIGHT LED SE/SA 1H 20-60V to be ordered separately
19359 INVERTER PLUG&LIGHT LED SE/SA 3H 20-60V to be ordered separately
19355 INVERTER LED AT/LG 6W 55V 123H to be ordered separately
19356 INVERTER LED LGFM 6W 55V 123H to be ordered separately
19372 INVERTER LED AT/LG 8W 55V 123h to be ordered separately
EMERGENCY WITH LED INVERTER ATTR LG LGFM
46
Lens Panel LEDCeiling, Suspension, M600
GENERAL CHARACTERISTICS
Equivalent Power* 4× 18 W
Power supply SD Version:93–265 VAC 50/60 Hz176–250 VDC
ED Version: 230 VAC ±10 % 50 Hz
Standard EN 60598-1, EN 60598-2-1,EN 60598-2-22 (fundamental
requirements), EN 62471 (Photobiological hazard)
Protection grade IP40 (visible side), IP20 (recessed side)
Working temp. -20 °C ÷ +40 °C
Mounting recessed M600, ceiling, suspension
Body galvanised Sheet steel painted with polyester powders RAL 9003
Optic transparent plexiglass UGR <19
Luminance 65°<3 000 cd/mq
Driver SD Version:Electronic SD (cos j ≥ 0.96)with intelligent dimming
ED Version:Electronic ED (cos j ≥ 0.95)
MTBF Control gear** 80 000 h
Luminous flux >60 000 (L80B20) maintenance**
Colour deviation 3 SDCM
* Equivalent power for comparison with fluorescent tube fixtures** At environmental reference temperature of 25 °C
15039 OPTICOM PHOTOSENSOR
Accessories supplied Order code Description
70033 SUSPENSION KIT 20097 CEILING FRAME LED PANEL 600X600 (essential for SD versions or when paired with the Plug&Light inverter)
Accessories to be ordered separately Order code Description
20102 BUILDING AUTOMATION CENTRAL UNIT 20124 BUILDING AUTOMATION CENTRAL UNIT WIFI 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE 15024 DALI MODULE 15034 1-10V MODULE
Building automation to be ordered separately Order code Description
650°C
Version • Dimensions (mm) • Weight L B H H1 (ED) H2 (SD) kg
600×600 595 595 8 19 51 3.5
IP20IP40 IK05
Polar DiagramEfficiency and dimming
The increase in luminous efficacy (lm/W) andthe useful life of the device may vary signifi-cantly according to the degree to which it isdimmed. Assuming an average level of 50%of the luminous flux, the following results areobtained with the Lens Panel LED:
Dimming 50 %Device duration +40 %Luminous efficiency +15 %
This product is designed for flush-mounting installation in M600 modules, but its true elegance emerges in ceiling-mounting and suspended installations without an adapter frame. The profile is oneof the slimmest on the market (8 mm). In the Eco Driver version, thepower supply unit is embedded in the lamp profile. Slimmer than aLED panel, but offering a far higher EFFICIENCY level (>125 lm/W).Optic created with the multi-lenticular system with high transmittance,to reduce the glare effect (UGR <19) whilst maintaining the same light-ing efficiency.
SMARTDRIVER 4400lumen
UGR<19
47
CEILING MOUNTINGSUSPENDED MOUNTING RECESSED MOUNTING
20097 Ceiling Frame LED Panel 600x600 SD model only
70033 Suspension Kit
MULTI-LENTICULAR OPTIC
SPECIAL VARIANTS: COLOUR RENDERING ≥90, COLOUR TEMPERATUREContact the Beghelli sales network
INTELLIGENT PHOTOSENSOR
Autodimmer Natural Light
Autodimmer Dynamic Light
Smartphone Interface to control and set up system1. 2. 3.
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
Lens Panel – UGR <19 SmartDriver LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
4× 18 LP418SD LENS PAN 418 M600 UGR19 SD 4K 32 4 000 >80 35 36 4 700 4 400 125 A++ 1/3
Lens Panel – UGR <19 Eco Driver LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
4× 18 LP418ED LENS PAN 418 M600 UGR19 ED4K 23 4 000 >80 25 36 3 700 3 400 136 A++ 1/3
MODULEMODULE
DOMOTIC
RECE
SSED
INVERTER
19377 INVERTER PLUG&LIGHT LED SE/SA 1H 20-60V IP65 to be ordered separately
19368 INVERTER PLUG&LIGHT LED SE/SA 3H 20-60V IP65 to be ordered separately
19355* INVERTER LED LG 6W 55V 123H to be ordered separately
19372* INVERTER LED LG 8W 55V 123H to be ordered separately
19390* INV EXT AT/LG AR 15W 55V LTO to be ordered separately
19391* INV EXT AT/LG AR 15W 55V LiFe to be ordered separately
EMERGENCY WITH LED INVERTER ATTR LG LGFM
* IP65 cover (order code 19376) is needed for the installation LGFM Module 19375
Polar Diagram
Lens Panel LEDCeiling, Suspension, M600
GENERAL CHARACTERISTICS
Equivalent Power* 2× 36, 2× 58 W
Power supply SD Version:93–265 VAC 50/60 Hz176–250 VDC
ED Version: 230 VAC ±10 % 50 Hz
Standard EN 60598-1, EN 60598-2-1,EN 60598-2-22 (fundamental
requirements), EN 62471 (Photobiological hazard)
Protection grade IP40 (visible side), IP20 (recessed side)
Working temp. -20 °C ÷ +40 °C
Mounting ceiling, suspended mounting
Body galvanised Sheet steel painted with polyester powders RAL 9003
Lenses transparent PMMA UGR <19
Luminance 65°<3 000 cd/mq Driver SD Version:
Electronic SD (cos j ≥ 0.96)Electronic intelligent dimming system
ED Version:Electronic ED (cos j ≥ 0.95)
MTBF Control gear** 80 000 h Luminous flux >60 000 (L80B20) maintenance**
Colour deviation 3 SDCM
* Equivalent power for comparison with fluorescent tube fixtures** At environmental reference temperature of 25 °C
70033 SUSPENSION KIT 20100 CEILING FRAME LED PANEL 300X1200 (only for SD versions or when paired with the Plug&Light inverter)
Accessories to be ordered separately Order code Description
20102 BUILDING AUTOMATION CENTRAL UNIT 20124 BUILDING AUTOMATION CENTRAL UNIT WIFI 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE 15024 DALI MODULE 15034 1-10V MODULE
Building automation to be ordered separately Order code Description
650°C
L
B
H1
H
IP20IP40 IK05
48
This product is designed for flush-mounting installation in M600 modules, but its true elegance emerges in ceiling-mounting and suspended installations without an adapter frame. The profile is oneof the slimmest on the market (8 mm). In the Eco Driver version, thepower supply unit is inserted in the lamp profile. Slimmer than a LEDpanel, but offering a far higher EFFICIENCY level (>125 lm/W). Opticcreated with the multi-lenticular system with high transmittance, to re-duce the glare effect (UGR <19) whilst maintaining the same lightingefficiency.
Version • Dimensions (mm) • Weight L B H H1 (ED) H2 (SD) kg
1 200×300 1 196 296 8 19 51 4.9
15039 OPTICOM PHOTOSENSOR
Accessories supplied Order code Description
Efficiency and dimming
The increase in luminous efficacy (lm/W) andthe useful life of the device may vary signifi-cantly according to the degree to which it isdimmed. Assuming an average level of 50%of the luminous flux, the following results areobtained with the Lens Panel LED:
Dimming 50 %Device duration +40 %Luminous efficiency +15 %
SMARTDRIVER 7000lumen
UGR<19
CEILING MOUNTINGSUSPENDED MOUNTING RECESSED MOUNTING
20100 CEILING ADAPTER 300x120070033 SUSPENSION KIT
MULTI-LENTICULAR SCREEN
SPECIAL VARIANTS: COLOUR RENDERING ≥90, COLOUR TEMPERATURE ON REQUESTContact the Beghelli sales network
INTELLIGENT PHOTOSENSOR
Autodimmer Natural Light
Autodimmer Dynamic Light
Smartphone Interface to control and set up system1. 2. 3.
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
Lens Panel – UGR <19 SmartDriver LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
2× 36 LP236SD LENS PAN 236 300x1200 UGR19 SD4K 38 4 000 >80 41 72 6 100 5 300 130 A++ 1/3
2× 58 LP258SD LENS PAN 258 300x1200 UGR19 SD4K 50 4 000 >80 56 72 7 500 7 000 125 A++ 1/3
Lens Panel – UGR <19 Eco Driver LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
2× 36 LP236ED LENS PAN 236 300x1200 UGR19 ED4K 29 4 000 >80 32 72 5 400 4 500 140 A++ 1/3
2× 58 LP258ED LENS PAN 258 300x1200 UGR19 ED4K 46 4 000 >80 50 72 7 100 6 500 130 A++ 1/3
49
MODULEMODULE
DOMOTIC
RECE
SSED
INVERTER
19358 INVERTER PLUG&LIGHT LED SE/SA 1H 20-60V to be ordered separately
19359 INVERTER PLUG&LIGHT LED SE/SA 3H 20-60V to be ordered separately
19355* INVERTER LED AT/LG 6W 55V 123h to be ordered separately
19372* INVERTER LED AT/LG 8W 55V 123h to be ordered separately
19390* INV EXT AT/LG 15W 55V 0.75-1-2-3-8h LTO to be ordered separately
19391* INV EXT AT/LG 15W 55V 0.75-1-2 3-8h LiFe to be ordered separately
EMERGENCY WITH LED INVERTER ATTR LG LGFM
* IP65 cover (order code 19376) is needed for the installation LGFM Module 19375
SMARTDRIVER 4000lumen
UGR<19
LED Panel SDCeiling, Suspension, M600
GENERAL CHARACTERISTICS
Equivalent Power* 4× 18 W
Power supply 93–265 VAC 50–60 Hz176–250 VDC
Standard EN 60598-1, EN 60598-2-22,(fundamental requirements)EN 62471
Protection grade IP40
Working temp. -20 °C ÷ +40 °C
Mounting recessed M600, ceiling, suspension
Body Aluminum, white color, RAL 9003
Optic self-extinguishing micro-prismatic screen stabilised against UV rays, anti-glare UGR <19
Luminance 65°<3 000 cd/mq
Driver Electronic SD (cos j ≥ 0.96) with intelligent dimming
MTBF Control gear** 80 000 h
Colour Temperature 4 000 K Luminous flux >60 000 (L80B20) maintenance**
Colour deviation 3 SDCM
* Equivalent power for comparison with fluorescent tube fixtures** At environmental reference temperature of 25 °C
15039 OPTICOM PHOTOSENSOR
Accessories supplied Order code Description
20094 SUSPENSION KIT 20097 CEILING ADAPTER
Accessories to be ordered separately Order code Description
20102 BUILDING AUTOMATION CENTRAL UNIT 20124 BUILDING AUTOMATION CENTRAL UNIT WIFI 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE 15024 DALI MODULE 15034 1-10V MODULE
Building automation to be ordered separately Order code Description
650°C
Version • Dimensions (mm) • Weight L B H H1 kg
600×600 595 595 9 41 3.5
L
B
H1
H
IK05IP40
Innovative and highly versatile LED fixture. The highly reduced thicknessand the minimal weight provide a real solution for suspended installa-tion even in prestigious architectural spaces. When recessed in theexposed structure, the slim and innovative fixture profile gets perfetclyaligned with the ceiling panels.The high efficiency LEDs and the opal micro-prismatic diffuser screenallow to use this revolutionary fixture in every kind of application wherevisual comfort and diffuse lights are required, for example in offices,schools, hotels and shopping malls. Mounting is easier thanks to theexclusive quick fastening system.The emergency Plug & Light kit, available because LED panel isequipped with SD, lets to transform the fixture in a emergency lightingin case of power main failure.
CEILING MOUNTINGSUSPENDED MOUNTING
RECESSED MOUNTING
50
PRISMATIC GLASS DIFFUSER
INTELLIGENT PHOTOSENSOR
Autodimmer Natural Light
Autodimmer Dynamic Light
Smartphone Interface to control and set up system1. 2. 3.
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
LED Panel – UGR <19 SmartDriver LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
4× 18 418PSD LED PANEL 418 M600 UGR19 SD 4K 32 4 000 >80 36 270 5 500 4 000 111 A++ 1
C0-C180 C90-C270
105
90
75
60
45
3015 0 15
cd/klm
Polar Diagram
Efficiency and dimming
The increase in luminous efficacy (lm/W) andthe useful life of the device may vary signifi-cantly according to the degree to which it isdimmed. Assuming an average level of 50%of the luminous flux, the following results areobtained with the LED Panel SD:
Dimming 50 %Device duration +40 %Luminous efficiency +15 %
SPECIAL VARIANTS: COLOUR TEMPERATURE ON REQUEST, IP65 VERSION Contact the Beghelli sales network
51
MODULEMODULE
DOMOTIC
RECE
SSED
INVERTER
19377 INVERTER PLUG&LIGHT LED SE/SA 1H 20-60V IP65 to be ordered separately
19368 INVERTER PLUG&LIGHT LED SE/SA 3H 20-60V IP65 to be ordered separately
19355* INVERTER LED LG 6W 55V 123H to be ordered separately
19372* INVERTER LED LG 8W 55V 123H to be ordered separately
19390* INV EXT AT/LG AR 15W 55V LTO to be ordered separately
19391* INV EXT AT/LG AR 15W 55V LiFe to be ordered separately
EMERGENCY WITH LED INVERTER ATTR LG LGFM
* IP65 cover (order code 19376) is needed for the installation LGFM Module 19375
SMARTDRIVER 4000lumen
UGR<19
LED Panel SD UGR<19Ceiling, suspension, M600
GENERAL CHARACTERISTICS
Equivalent Power* 2× 36 W
Power supply 93–265 VAC 50–60 Hz176–250 VDC
Standard EN 60598-1, EN 60598-2-22,(fundamental requirements)
EN 62471 (Photobiological hazard)
Protection grade IP20 (visible side), IP40 (recessed side)
Working temp. -20 °C ÷ +40 °C
Mounting recessed M600, ceiling, suspension
Frame Aluminum, white color
PMMA diffuser stabilized to UV rays self-extinguishing, micro prismatic,
anti-glare UGR <19
Luminance 65°<3 000 cd/mq
Colour Temperature 4000 K
Driver Electronic SD (cos j ≥ 0.96) Electronic intelligent dimming system
MTBF Control gear** 80 000 h
Luminous flux >60 000 (L80B20) maintenance**
Colour deviation 3 SDCM
* Equivalent power for comparison with fluorescent tube fixtures** At environmental reference temperature of 25 °C
15039 OPTICOM PHOTOSENSOR
Accessories supplied Order code Description
20094 SUSPENSION KIT 20100 CEILING ADAPTER
Accessories to be ordered separately Order code Description 20102 BUILDING AUTOMATION CENTRAL UNIT
20124 BUILDING AUTOMATION CENTRAL UNIT WIFI 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE 15024 DALI MODULE 15034 1-10V MODULE
Building automation to be ordered separately Order code Description
650°C
Power • Dimensions (mm) • Weight W* L B H H1 kg
2× 36 1 196 296 9 41 4.9
L
B
H1
H
IK05
Innovative and highly versatile LED source device. The highly minimalthickness, and the reduced weight permit suspension installation evenin prestigious architectural spaces.The extremely high efficiency of the LEDS and the opal micro prismaticdiffuser screen allow the use of this revolutionary device in all spacesthat are occupied for long periods of time and demand excellent visualcomfort such as schools, hotels and shopping centers. Installation iseasy with the exclusive rapid fixing system.Also available is an emergency kit that includes an inverter and batteryfor activation in case of blackouts both in the AT and LG intelligent versions and with the latest Plug&Light immediate-connection inverter.
SPECIAL VARIANTS: COLOUR TEMPERATURE ON REQUEST, IP65 VERSION Contact the Beghelli sales network
52
IP20IP40
C0-C180 C90-C270
105
90
75
60
45
3015 0 15
cd/klm
INTELLIGENT PHOTOSENSOR
Autodimmer Natural Light
Autodimmer Dynamic Light
Smartphone Interface to control and set up system1. 2. 3.
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
Polar Diagram
PRISMATIC GLASS DIFFUSER
Efficiency and dimming
The increase in luminous efficacy (lm/W) andthe useful life of the device may vary signifi-cantly according to the degree to which it isdimmed. Assuming an average level of 50%of the luminous flux, the following results areobtained with the LED Panel SD:
Dimming 50 %Device duration +40 %Luminous efficiency +10 %
53
CEILING MOUNTINGSUSPENDED MOUNTING
20100 CEILING ADAPTER 20094 SUSPENSION KIT
LED Panel – UGR <19 SmartDriver LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
2× 36 236PLSD LED PANEL 236 300x1200 UGR19 SD 4K 32 4 000 >80 36 270 5 500 4 000 111 A++ 1
MODULEMODULE
DOMOTIC
RECE
SSED
INVERTER
19358 INVERTER PLUG&LIGHT LED SE/SA 1H 20-60V to be ordered separately
19359 INVERTER PLUG&LIGHT LED SE/SA 3H 20-60V to be ordered separately
19355* INVERTER LED AT/LG 6W 55V 123h to be ordered separately
19372* INVERTER LED AT/LG 8W 55V 123h to be ordered separately
19390* INVERTER EXT AT/LG 15W 55V 0,75-1-2-3-8h LTO to be ordered separately
19391* INVERTER EXT AT/LG 15W 55V 0,75-1-2-3-8h LiFe to be ordered separately
EMERGENCY WITH LED INVERTER ATTR LG LGFM
* IP65 cover (order code 19376) is needed for the installation LGFM Module 19375
Power* • Dimensions (mm) • Mounting Weight W L B H kg
4× 18 595 595 46 recessed 3.2 4× 18 635 635 54 ceiling 4.5 4× 18 595 595 46 recessed 5.6 4× 18 635 635 54 ceiling 6.9
1232 CEILING FRAME INC ECO LED 10404 BRACKETS FOR SLATS
Accessories to be ordered separately Order code Description
B
L H
B
L
3,6
H
Ceiling version
Recessed M600 version
20102 BUILDING AUTOMATION CENTRAL UNIT 20124 BUILDING AUTOMATION CENTRAL UNIT WIFI 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE 15024 DALI MODULE 15034 1-10V MODULE
Building automation to be ordered separately Order code Description
15039 OPTICOM PHOTOSENSOR
Accessories supplied Order code Description
54
I418 LEDCeiling, recessed M600, plasterboards, slats
Recessed fixture for mounting in an exposed structure, slats and plas-terboard. Also for CEILING mounting with an adaptor. Characterizedby excellent Dark Light anti-glare control, its use is particularly indicatedin all workplaces with video terminals where employees are exposedto artificial light for long periods.The exact emission of light on the work surface gives precision to thebeam of light, the indirect emission that is reflected on the side reflec-tors considerably increases comfort thanks to an overall result of softlight.Additional accessories are available for integrating emergency lighting:the LED Inverter for lighting up part of the fixture in the event of a black-out, or the LED Module for inserting in the seat provided.GENERAL CHARACTERISTICS
Equivalent Power* 4× 18 W
Power supply SD Version: 93–265 VAC 50/60 Hz
176–250 VDC
Traditional driver version:230 VAC ±10 % 50 Hz
Standard EN 60598-1, EN 60598-2-2,EN 60598-2-22 (fundamental requirements),
EN 62471 (photobiological hazard)
Protection grade IP20, IP54
Working temp. -20 °C ÷ +40 °C
Mounting recessed, slats, plasterboards, ceiling
Housing galvanised Sheet steel painted with polyester powders RAL 9003
Optic sheet metal Dark light type UGR <19
Luminance 65°<1 000 cd/mq
Driver SELV electronic SD (cos j ≥ 0.96) Electronic with intelligent dimming
MTBF Control gear** 80 000 h
Luminous flux >60 000 h (L80B20) maintenance**
Colour deviation 3 SDCM
* Equivalent power for comparison with fluorescent tube fixtures** At environmental reference temperature of 25 °C
SMARTDRIVER 4000lumen
UGR<19
960°CDARKLIGHT IP20 IP54
SPECIAL VARIANTS: COLOUR RENDERING ≥90, COLOUR TEMPERATURE ON REQUESTContact the Beghelli sales network
10404 Bracket for slats to be ordered separately
RECESSED MOUNTING ON PLASTERBOARD/SLATS
1232 Ceiling adapter
CEILING MOUNTING
I418SDPC with polycarbonate diffuser
I418SDVT with glass diffuser
IP54 VERSION
19350 INVERTER ECOLED SE 1N RM to be ordered separately
19341 MODULE EM LED AT SE 1N to be ordered separately
19342 MODULE EM LED LG SE/SA 1/3H to be ordered separately
19343 MODULE EM LED LGFM SE/SA 1/3H to be ordered separately
EMERGENCY WITH INVERTER ECOLED/LED MODULE
IP40
DARK LIGHT WIDE OPTIC
INTELLIGENT PHOTOSENSOR
Autodimmer Natural Light
Autodimmer Dynamic Light
Smartphone Interface to control and set up system
MODULEMODULE
DOMOTIC
1. 2. 3.
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
Efficiency and dimming
The increase in luminous efficacy (lm/W) andthe useful life of the device may vary signifi-cantly according to the degree to which it isdimmed. Assuming an average level of 50%of the luminous flux, the following results areobtained with the I418 LED:
Dimming 50 %Device duration +40 %Luminous efficiency +15 %
I418 LED SmartDriver LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
4× 18 I418SD INC M600 4X18 LED SD 4000K 32 4 000 >80 36 90 4 400 4 000 110 A++ 1
4× 18 I418SDPC INC M600 4X18 LED SD P IP54 4000K 32 4 000 >80 36 90 4 400 3 700 100 A++ 1
4× 18 I418SDVT INC M600 4X18 LED SD V IP54 4000K 32 4 000 >80 36 90 4 400 3 700 100 A++ 1
4× 18 I418LED ** INC M600 4X18 LED B 4000K 32 4 000 >80 36 90 4 400 4 000 110 A++ 1
4× 18 I418TRLED ** INC M600 4X18 LED TR SD 4000K 32 4 000 >80 36 90 4 400 4 000 110 A++ 1
** Versions with traditional electronic driver 55
RECE
SSED
Polar Diagram
INVERTER
19358 INVERTER PLUG&LIGHT LED SE/SA 1H 20-60V to be ordered separately
19359 INVERTER PLUG&LIGHT LED SE/SA 3H 20-60V to be ordered separately
19355 INVERTER LED AT/LG 6W 55V 123H to be ordered separately
19372 INVERTER LED AT/LG 8W 55V 123H to be ordered separately
19390 INVERTER EXT AT/LG 15W 55V 0,75-1-2-3-8H LTO to be ordered separately
19391 INVERTER EXT AT/LG 15W 55V 0,75-1-2-3-8H LiFe to be ordered separately
EMERGENCY WITH LED INVERTER ATTR LG LGFM
LG Inverters can be transformed in LGFM with the accessory code 19375
Arietis LED is a luminaire for universal recessed mounting into ceilingmodules M600 and plaster ceilings and for ceiling mounting. Its bodyis made of a steel sheet finished by powder technology varnishing,colour white RAL 9003, with diffuser with microprismatic optics. Thedegree of protection is IP65.It fits perfectly in hospitals, laboratories, precincts with high humidityand dustiness, precincts demanding high sanitary codes, operatingtheaters.
IP65GENERAL CHARACTERISTICS
Equivalent Power* 4× 14 W
Power supply SD Version: 93–265 VAC 50/60 Hz176–250 VDC
ED Version: 230 VAC ±10 % 50 Hz
Standard EN 60598-1, EN 60598-2-22(fundamental requirements), EN 62471(photobiological hazard)
Protection grade IP65
Working temp. -20 °C ÷ +40 °C
Mounting Universal recessed mounting into ceilingmodules M600 and plaster ceilings(holders are components of the lumi-naire), ceiling mounting
Body Steel sheet finished by powder techno -logy varnishing, white color, RAL 9003
Optic microprismatic
Driver SD Version:SmartDriver (cos j ≥ 0.96)ED Version:Eco Driver (cos j ≥ 0.95)
MTBF Control gear** SD Version: 80 000 h ED Version: 70 000 h
Luminous flux >50 000 h (L90B10) maintenance**
Colour deviation 3 SDCM
* Equivalent power for comparison with fluorescent tube fixtures** At environmental reference temperature of 25 °C
SMARTDRIVER
Arietis LEDRecessed and ceiling LED luminaire
20102 BUILDING AUTOMATION CENTRAL UNIT 20124 BUILDING AUTOMATION CENTRAL UNIT WIFI 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE 15024 DALI MODULE 15034 1-10V MODULE
Building automation to be ordered separately Order code Description
B’B
B H
B
L’
H
L
L
Ceiling version
Recessed version
Mounting hole
Version • Dimensions (mm) • Cut out hole WeightL B H L’ B’ kg
recessed 677 682 96 – – 6.0 ceiling 595 595 112 565 565 5.5
MOUNTING INTO PLASTER CEILING MOUNTING INTO CEILING MODULE M600
SPECIAL VARIANTS: COLOUR RENDERING ≥90, COLOUR TEMPERATURE ON REQUEST Contact the Beghelli sales network
56
150
300
450
600
Polar Diagram
INVERTER
Luminaires equipped with inverter must be ordered from the production as a wholepackage:Code extension:/PL1 (inv. 19358)/PL3 (inv. 19359)/LGL (inv. 19355)/LGLF (inv. 19356)/LGLN (inv. 19372)
EMERGENCY WITH LED INVERTER
57
* Indicative power just for fluorescent fixtures comparison purposeOn request: M – frosted acrylic diffuser
Arietis LED SmartDriver LED Colour Colour Power consumption Flux of LEDs Flux of Energy
Power* W Order code Mounting Description Power W Temp. K rendering max W N°LEDs lm (Tj=25 °C) fixture lm lm/W Class Packaging
4× 14 A36-10150CWSD recessed M600 Arietis LED IP65 SD 39 4 000 >80 42 352 5 400 4 700 112 A+ 1
4× 14 A31-10117CWSD ceiling Arietis LED IP65 SD 39 4 000 >80 42 352 5 400 4 700 112 A+ 1
Arietis LED Eco Driver LED Colour Colour Power consumption Flux of LEDs Flux of Energy
Power* W Order code Mounting Description Power W Temp. K rendering max W N°LEDs lm (Tj=25 °C) fixture lm lm/W Class Packaging
4× 14 36-999/414/NW recessed M600 Arietis LED IP65 ED 39 4 000 >80 42 352 5 400 4 700 112 A+ 1
4× 14 A31-10117CWED ceiling Arietis LED IP65 ED 39 4 000 >80 42 352 5 400 4 700 112 A+ 1
MODULE
DOMOTIC
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
Efficiency and dimming
The increase in luminous efficacy (lm/W) andthe useful life of the device may vary signifi-cantly according to the degree to which it isdimmed. Assuming an average level of 50%of the luminous flux, the following results areobtained with the Arietis LED:
Dimming 50 %Device duration +40 %Luminous efficiency +15 %
RECE
SSED
GENERAL CHARACTERISTICS
Equivalent Power* 35, 70, 150 W
Power supply SD Version: 93–265 VAC 50/60 Hz 176–250 VDC
ED Version: 230 VAC ±10 % 50 Hz
Standard EN 60598-1, EN 60598-2-1,EN 60598-2-22 (fundamental
requirements), EN 62471(photobiological hazard)
Protection grade IP40
Working temp. -20 ÷ +40 °C
Mounting Mono and three phase electrified track
Housing Die-cast aluminium, white RAL 9010
Optic Zoom LED System (PMMA lenses)
Driver SD Version:Electronic SD (cos j≥ 0.96)Electronic with intelligent dimming
ED version:Electronic ED (cos j≥ 0.95)
MTBF Control gear** 80 000 h
Luminous flux >70 000 h (1× 70, 1× 150) (L80B20) maintenance** >80 000 h (1× 35) (L80B20)
Colour deviation 3 SDCM
* Equivalent power for comparison with metal halide fixtures** At environmental reference temperature of 25 °C
20102 BUILDING AUTOMATION CENTRAL UNIT 20124 BUILDING AUTOMATION CENTRAL UNIT WIFI 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE
Building automation to be ordered separately Order code Description
B
HL
L
B
H
Single-phase version 330 170 53 1.4 Three-phase version 239 194 61 1.4
Version • Dimensions (mm) • Weight L B H max kg
SMARTDRIVER
58
Zoom LEDThree-phase electrified track
Adjustable focus projector made of die-cast aluminium which inte-grates the power of 9 high-efficiency LEDs. Patented optics, consistingof a system of variable focus PMMA lenses to adjust the beam of lightwith an angle between 10° and 40°. Adjustment is continuous and isobtained by a regulator on the rear. The fixture can be oriented on boththe horizontal and the vertical axis. The Zoom Led system envisagesthe used of a vast range of accessories for the creation of a three-phase electrified track; The adaptor supplied allows the spotlight to beused on most of the three-phase electrified tracks available on the market. The Zoom Led range has been designed specifically for accent lighting, where it is essential to enhance the items on display.
650°CIP40 IK05
Efficiency and dimming
The increase in luminous efficacy (lm/W) andthe useful life of the device may vary signifi-cantly according to the degree to which it isdimmed. Assuming an average level of 50%of the luminous flux, the following results areobtained with the Zoom LED:
Dimming 50 %Device duration +40 %Luminous efficiency +15 %
Zoom LED electrified track Eco Driver LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
THREE-PHASE VERSION 1× 70 Z170ED ZOOM LED BTRF 1X70 ED 3K 29 3 000 ≥80 33 9 3 200 2 500 76 A++ 1/1
1× 150 Z1150ED ZOOM LED BTRF 1X150 ED 3K 47 3 000 ≥80 52 9 5 000 4 000 77 A++ 1/1
SINGLE-PHASE VERSION 1× 70 Z170MFED ZOOM LED BMF 1X70 ED 3K 29 3 000 ≥80 33 9 3 200 2 500 76 A++ 1/1
1× 150 Z1150MFED ZOOM LED BMF 1X150 ED 3K 47 3 000 ≥80 52 9 5 000 4 000 77 A++ 1/1
THREE-PHASE VERSION SINGLE-PHASE VERSION
SPECIAL VARIANTS: COLOUR TEMPERATURE ON REQUEST, COLOUR RENDERING ≥90Contact the Beghelli sales network
MINIMUM RANGE OF THE FOCAL LENGTH FOR 10° CONE OF LIGHT MAXIMUM RANGE OF THE FOCAL LENGTH FOR 40° CONE OF LIGHT
Zoom LED electrified track SmartDriver
Beam width 10°
Ø 0.11 m 119 379 lx0.5 m
Ø 0.22 m 29 845 lx1.0 m
Ø 0.33 m 13 264 lx1.5 m
Ø 0.44 m 7 461 lx2.0 m
Ø 0.66 m 3 316 lx3.0 m
Ø 0.55 m 4 775 lx2.5 m
I max 35w*= 28 800 Cd / I max 70w*= 47 400 Cd
DiameterDistance Luminosity
Beam width 20°DiameterDistance Luminosity
Ø 0.18 m 49 269 lx0.5 m
Ø 0.36 m 12 317 lx1.0 m
Ø 0.53 m 5 474 lx1.5 m
Ø 0.71 m 3 079 lx2.0 m
Ø 1.07 m 1 369 lx3.0 m
Ø 0.89 m 1 971 lx2.5 m
I max 35w*= 11 900 / I max 70w*= 19 550 Cd
Beam width 30°
Ø 0.29 m 24 656 lx0.5 m
Ø 0.58 m 6 164 lx1.0 m
Ø 0.87 m 2 740 lx1.5 m
Ø 1.15 m 1 541 lx2.0 m
Ø 1.73 m 685 lx3.0 m
Ø 1.44 m 986 lx2.5 m
I max 35w*= 5 950 Cd / I max 70w*= 9 800 Cd
DiameterDistance Luminosity
Beam width 40°
Ø 0.39 m 16 512 lx0.5 m
Ø 0.78 m 4 128 lx1.0 m
Ø 1.16 m 1 835 lx1.5 m
Ø 1.55 m 1 032 lx2.0 m
Ø 2.33 m 459 lx3.0 m
Ø 1.94 m 660 lx2.5 m
I max 35w*= 4 000 Cd / I max 70w*= 6 550 Cd
DiameterDistance Luminosity
59
MODULE
DOMOTIC
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
THREE-PHASE VERSION 1× 35 Z135SD ZOOM LED BTRF 1X35 SD 3K 13 3 000 ≥80 17 9 1 750 1 400 84 A++ 1/1
1× 70 Z170SD ZOOM LED BTRF 1X70 SD 3K 29 3 000 ≥80 33(30***) 9 3 200 2 500 76 A++ 1/1
1× 150 Z1150SD ZOOM LED BTRF 1X150 SD 3K 47 3 000 ≥80 52(45***) 9 5 000 4 000 77 A++ 1/1
SINGLE-PHASE VERSION 1× 35 Z135MFSD ZOOM LED BMF 1X35 SD 3K 13 3 000 ≥80 17 9 1 750 1 400 84 A++ 1/1
1× 70 Z170MFSD ZOOM LED BMF 1X70 SD 3K 29 3 000 ≥80 33(30***) 9 3 200 2 500 76 A++ 1/1
1× 150 Z1150MFSD ZOOM LED BMF 1X150 SD 3K 47 3 000 ≥80 52(45***) 9 5 000 4 000 77 A++ 1/1
*** The power consumption has an auto derating to the power indicated in parenthesys if the product is powered by voltage less than 110 VAC.
DECO
RATI
VE
GENERAL CHARACTERISTICS
Equivalent Power* 35, 70, 150 W
Power supply 93–265 VAC 50/60 Hz176–250 VDC
Standard EN 60598-1, EN 60598-2-1,EN 60598-2-22 (fundamental
requirements), EN 62471 (photobiological hazard)
Protection grade IP40
Working temp. -20 ÷ +40 °C
Mounting wall, ceiling
Housing Die-cast aluminium, white RAL 9010
Optic Zoom LED System (PMMA lenses)
Driver Electronic SD (cos j≥ 0.96)Electronic with intelligent dimming
MTBF Control gear** 80 000 h
Luminous flux >70 000 h (1× 70, 1× 150) (L80B20) maintenance** >80 000 h (1× 35) (L80B20)
Colour deviation 3 SDCM
* Equivalent power for comparison with metal halide fixtures** At environmental reference temperature of 25 °C
SPECIAL VARIANTS: COLOUR RENDERING ≥90, COLOUR TEMPERATURE Contact the Beghelli sales network
650°CIP40 IK05
20102 BUILDING AUTOMATION CENTRAL UNIT 20124 BUILDING AUTOMATION CENTRAL UNIT WIFI 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE
Building automation to be ordered separately Order code Description
340°
L
B
H
+180°
35, 70, 150 W 240 195 53 1.4
Version • Dimensions (mm) • Weight L B H max kg
SMARTDRIVER
60
Adjustable focus projector made of die-cast aluminium which inte-grates the power of 9 high-efficiency LEDs. Patented optics, consistingof a system of variable focus PMMA lenses to adjust the beam of lightwith an angle between 10° and 40°. Adjustment is continuous and isobtained by a regulator on the rear. The fixture can be oriented on boththe horizontal and the vertical axis. With the bracket supplied it can be mounted on the wall or on the ceiling. The Zoom Led range has been designed specifically for accent lighting, where it is essentialto enhance the items on display.
Zoom LEDMounting on ceiling, wall
Efficiency and dimming
The increase in luminous efficacy (lm/W) andthe useful life of the device may vary signifi-cantly according to the degree to which it isdimmed. Assuming an average level of 50%of the luminous flux, the following results areobtained with the Zoom LED:
Dimming 50 %Device duration +40 %Luminous efficiency +15 %
61
MODULE
DOMOTIC
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
MINIMUM RANGE OF THE FOCAL LENGTH FOR 10° CONE OF LIGHT MAXIMUM RANGE OF THE FOCAL LENGTH FOR 40° CONE OF LIGHT
Zoom LED SmartDriver LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
1× 35 Z135ASD ZOOM LED AP 1X35 SD 3K 13 3 000 ≥80 17 9 1 750 1 400 84 A++ 1
1× 70 Z170ASD ZOOM LED AP 1X70 SD 3K 29 3 000 ≥80 33 9 3 200 2 500 76 A++ 1
1× 150 Z1150ASD ZOOM LED AP 1X150 SD 3K 47 3 000 ≥80 52(50***) 9 5 000 4 000 77 A++ 1
*** The power consumption has an auto derating to the power indicated in parenthesys if the product is powered by voltage less than 110 VAC.
DECO
RATI
VE
Beam width 10°
Ø 0.11 m 119 379 lx0.5 m
Ø 0.22 m 29 845 lx1.0 m
Ø 0.33 m 13 264 lx1.5 m
Ø 0.44 m 7 461 lx2.0 m
Ø 0.66 m 3 316 lx3.0 m
Ø 0.55 m 4 775 lx2.5 m
I max 35w*= 28 800 Cd / I max 70w*= 47 400 Cd
DiameterDistance Luminosity
Beam width 20°DiameterDistance Luminosity
Ø 0.18 m 49 269 lx0.5 m
Ø 0.36 m 12 317 lx1.0 m
Ø 0.53 m 5 474 lx1.5 m
Ø 0.71 m 3 079 lx2.0 m
Ø 1.07 m 1 369 lx3.0 m
Ø 0.89 m 1 971 lx2.5 m
I max 35w*= 11 900 / I max 70w*= 19 550 Cd
Beam width 30°
Ø 0.29 m 24 656 lx0.5 m
Ø 0.58 m 6 164 lx1.0 m
Ø 0.87 m 2 740 lx1.5 m
Ø 1.15 m 1 541 lx2.0 m
Ø 1.73 m 685 lx3.0 m
Ø 1.44 m 986 lx2.5 m
I max 35w*= 5 950 Cd / I max 70w*= 9 800 Cd
DiameterDistance Luminosity
Beam width 40°
Ø 0.39 m 16 512 lx0.5 m
Ø 0.78 m 4 128 lx1.0 m
Ø 1.16 m 1 835 lx1.5 m
Ø 1.55 m 1 032 lx2.0 m
Ø 2.33 m 459 lx3.0 m
Ø 1.94 m 660 lx2.5 m
I max 35w*= 4 000 Cd / I max 70w*= 6 550 Cd
DiameterDistance Luminosity
GENERAL CHARACTERISTICS
Equivalent Power* 20, 50 W
Standard EN 60598-1, EN 60598-2-1,EN 60598-2-22 (fundamental
requirements), EN 62471 (photobiological hazard)
Power supply 198–264 VAC / VDC
Protection grade IP40
Working temp. -20 °C ÷ +40 °C
Mounting ceiling, wall
Housing Polyester powder cated die-cast aluminium RAL 9010
Optic Zoom LED system with transparent PMMA lens
Driver Electronic ED (cos j≥ 0.95)
MTBF Control gear** 50 000 h
Luminous flux >60 000 h (1× 50 W) (L80B20) maintenance** >70 000 h (1× 20 W) (L80B20)
Colour deviation 3 SDCM
* Equivalent power for comparison with metal halide fixtures** At environmental reference temperature of 25 °C
IP40 650°C
L B
H
Power* • Dimensions (mm) • a Weight W L B H max max kg
20 105 56 116 40° 0.5 50 105 56 116 40° 0.5
SPECIAL VARIANTS: COLOUR RENDERING ≥90, COLOUR TEMPERATURE Contact the Beghelli sales network
62
Projector with adjustable focus and die-cast aluminium head, incorpo-rating a powerful high-efficiency LED light. Patented optics, consistingof a PMMA lens system with variable focal length to adjust the lightbeam to an angle of between 10° and 40°. The adjustment is contin-uous, and can be performed using the rear regulator. The device canbe adjusted both horizontally and vertically. The mounting bracket allows for wall or ceiling installation.
Zoom 1× LEDIndoor floodlight
Ø 0.10 m 40 331 lx0.5 m
Ø 0.19 m 10 083 lx1.0 m
Ø 0.29 m 4 481 lx1.5 m
Ø 0.39m 2 521 lx2.0 m
Ø 0.58 m 1 120 lx3.0 m
Ø 0.48 m 1 613 lx2.5 m
Beam width 10°50W version
DiameterDistance Luminosity
Ø 0.17 m 14 011 lx0.5 m
Ø 0.35 m 3 503 lx1.0 m
Ø 0.52 m 1 557 lx1.5 m
Ø 0.70 m 876 lx2.0 m
Ø 1.05 m 389 lx3.0 m
Ø 0.87 m 560 lx2.5 m
Beam width 20°50W version
DiameterDistance Luminosity
Ø 0.27 m 7 172 lx0.5 m
Ø 0.55 m 1 793 lx1.0 m
Ø 0.82 m 797 lx1.5 m
Ø 1.09 m 448 lx2.0 m
Ø 1.64 m 199 lx3.0 m
Ø 1.37 m 287 lx2.5 m
Beam width 30°50W version
DiameterDistance Luminosity DiameterDistance Luminosity
Ø 0.36 m 5 424 lx0.5 m
Ø 0.72 m 1 356 lx1.0 m
Ø 1.07 m 603 lx1.5 m
Ø 1.43 m 339 lx2.0 m
Ø 2.15 m 151 lx3.0 m
Ø 1.79 m 217 lx2.5 m
Beam width 40°50W version
Rear adjuster for adjusting the light beam
from 10° to 40°
63
Zoom 1× LED Eco Driver LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
1× 20 Z120A ZOOM 1x20 APPLIQUE 3 3 000 >80 4 1 500 350 84 A++ 1/1
1× 50 Z150A ZOOM 1x50 APPLIQUE 7.5 3 000 >80 9 1 1 000 720 80 A++ 1/1
DECO
RATI
VE
GENERAL CHARACTERISTICS
Equivalent Power* 70, 150 W
Power supply SD Version: 93–265 VAC 50/60 Hz 176–250 VDC
ED Version: 230 VAC ±10 % 50 Hz
Standard EN 60598-1, EN 60598-2-1,EN 60598-2-22 (fundamental requirements), EN 62471 (Photobiological hazard)
Protection grade IP40
Working temp. -20 ÷ +40 °C
Mounting three-phase and single-phase electrified track
Diffuser Tempered glass 3 mm thick
Housing Polyester powder coated die-cast aluminium RAL 9010 white
Optic mirror finished aluminium (24°supplied, 8°, 16° e 40° to be ordered separately)
Driver SD Version: Electronic SD (cos j≥ 0.96), with intelligent dimming
ED Version: Electronic ED (cos j≥ 0.95)
MTBF Control gear** 80 000 h
Luminous flux >60 000 h (1× 150) (L80B20) maintenance** >70 000 h (1× 70) (L80B20)
Colour deviation 3 SDCM
* Equivalent power for comparison with metal halide fixtures** At environmental reference temperature of 25 °C
960°C
Version • Dimensions (mm) • Weight L Ø H kg
Three-phase 331 114 194 1.2 Single-phase 239 114 221 1.2
1230 LENSES EXPO LED 16° 1231 LENSES EXPO LED 40° 1236 REFLEKTOR EXPO LED 8°
Accessories to be ordered separately Order code Description
IP40
L Ø
H
THREE-PHASE VERSION
L Ø
H
SINGLE-PHASE VERSION
Building automation to be ordered separately Order code Description
20102 BUILDING AUTOMATION CENTRAL UNIT 20124 BUILDING AUTOMATION CENTRAL UNIT WIFI 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE
SMARTDRIVER
64
Variable beam spotlight for indoor applications, particularly suitable in the retail sector and for exhibitions or shows. Body in die-cast aluminium with large LED source cooling flaps. This device can be installed on either tri-phase or single-phase electrified rail, and the trackadapter is mechanically compatible with the majority of commercially-available systems. The device is equipped with an optic with a beamaperture angle of 24° as standard, but optics with beam angles of 16°and 40° are also available on request.
Three-phase and single-phase electrified track
Expo LED Eco Driver LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
THREE-PHASE VERSION 1× 70 R170ED24 EXPO LED BTRF 1X70 24ED 3K 20 3 000 ≥80 24 1 COB 3 300 3 000 125 A++ 1/1
1× 150 R1150ED24 EXPO LED BTRF 1X150 24ED 3K 33 3 000 ≥80 37 1 COB 5 000 4 500 120 A++ 1/1
SINGLE-PHASE VERSION 1× 70 R170MFED24 EXPO LED BMF 1X70 24ED 3K 20 3 000 ≥80 24 1 COB 3 300 3 000 125 A++ 1/1
1× 150 R1150MFED24 EXPO LED BMF 1X150 24ED 3K 33 3 000 ≥80 37 1 COB 5 000 4 500 120 A++ 1/1
Expo LED
65
MODULE
DOMOTIC
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
Expo LED SmartDriver LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
THREE-PHASE VERSION 1× 70 R170SD24 EXPO LED BTRF 1X70 24SD 3K 21 3 000 ≥80 26 1 COB 3 400 3 100 119 A++ 1/1
1× 150 R1150SD24 EXPO LED BTRF 1X150 24SD 3K 38 3 000 ≥80 43 1 COB 5 500 5 000 116 A++ 1/1
SINGLE-PHASE VERSION 2× 70 R170MFSD24 EXPO LED BMF 1X70 24SD 3K 21 3 000 ≥80 26 1 COB 3 400 3 100 119 A++ 1/1
2× 150 R1150MFSD24 EXPO LED BMF 1X150 24SD 3K 38 3 000 ≥80 43 1 COB 5 500 5 000 116 A++ 1/1
DECO
RATI
VE
SPECIAL VARIANTS: COLOUR TEMPERATURE ON REQUEST, COLOUR RENDERING ≥90Contact the Beghelli sales network
C0-C180 C90-C270
cd/klm
Polar diagram 40°cd/klm
Polar diagram 24°
C0-C180 C90-C270
C0-C180 C90-C270
cd/klm
Polar diagram 16°cd/klm
Polar diagram 8°
C0-C180 C90-C270
SINGLE-PHASE VERSION
1236 REFLEKTOR EXPO LED 8°
1230 EXPO LED 16° REFLECTOR
1231 EXPO LED 40° REFLECTOR
8°, 16°, 40° REFLECTOR
Efficiency and dimming
The increase in luminous efficacy (lm/W) andthe useful life of the device may vary signifi-cantly according to the degree to which it isdimmed. Assuming an average level of 50%of the luminous flux, the following results areobtained with the Expo LED:
Dimming 50 %Device duration +40 %Luminous efficiency +15 %
SUPPLIED OPTIC WITH ORDER CODE 1231
WITH ORDER CODE 1236 WITH ORDER CODE 1230
66
SMARTDRIVER
Luminaire with different beam solutions integrated. Funzione3 LED hasa patented way to change optic thanks of PMMA screen able to rotateand change the lens configuration. Three solution / position are ava-ilable to get three different light beam to satisfy the most important opticrequirements.Wide symmetric beam ( UGR <25)Concentrating beam – Dark light ( UGR <19)Wall washer beam to vertical light up like walls, shelfs, objects.Funzione3 LED is an high technology fixture to meet the most importantneeds in a easy and elegant way.Available in SD and ED versions. It can be installed recessed ormounted to the ceiling with special accessory for ceiling mounting.
FUNZIONE3 LEDDownlight
650°CIK05IP40
H
Ø
H1
H2
L
Ø 170÷200
SPECIAL VARIANTS: COLOUR TEMPERATURE ON REQUEST, COLOUR RENDERING ≥90Contact the Beghelli sales network
INVERTER 19367 INVERTER PLUG&LIGHT LED SE/SA 1H 60–180V to be ordered separately
19371 INVERTER PLUG&LIGHT LED SE/SA 3H 60–180V to be ordered separately
EMERGENCY WITH LED INVERTER ONLY FOR SD TR
20129 CEILING FRAME (supplied in ED) 20128 SUSPENSION 3 wires
Accessories to be ordered separately Order code Description
20102 BUILDING AUTOMATION CENTRAL UNIT 20124 BUILDING AUTOMATION CENTRAL UNIT WIFI 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE 15024 DALI MODULE 15034 1-10V MODULE
Building automation to be ordered separately Order code Description
Ceiling Frame
• Dimensions (mm) • Weight Ø Ø1 H H1 L H2 kg
235 170÷200 6÷25 36 190 32 0.5
GENERAL CHARACTERISTICS
Equivalent Power* 2× 26 W, 1× 70 W
Power supply SD Version: 93–265 VAC 50/60 Hz
176–250 VDC (cos j≥ 0,96) ED Version: 230 VAC ±10 % 50 Hz (cos j≥ 0,90)
Standard EN 60598-1, EN 60598-2-1,EN 60598-2-22 (fundamentalrequirements), EN 62471(photobiological hazard)
Protection grade IP40
Working temp. -20 ÷ +40 °C
Mounting Recessed, ceiling
Body Polycarbonate, RAL 9003
Optic PMMA lenses
UGR <19, <25
MTBF Control gear** 70 000 h
Luminous flux >70 000 h (1× 150) (L80B20) maintenance**
Colour deviation 3 SDCM
* Equivalent power for comparison with fluorescent fixture ** At environmental reference temperature of 25 °C
20129 CEILING FRAME (supplied in ED)
20128 SUSPENSION 3 WIRES
20129 CEILING FRAME
** Product in single insulating *** The Fixture Flux is referred to the product setted on symmetric lens
FUNZIONE3 LED SmartDriver
SUSPENDED CEILING FRAMERECESSED MOUNTING
CONCENTRATING SYMMETRIC LENSUGR <19
WIDE SYMMETRIC LENSUGR <25
WALL WASHERASYMMETRIC LENS
Polar diagram Polar diagram Polar diagram
CCT Switch: nine differentluminaires, all-in-one
Multilens LED in the Multicolor versionoffers the highest versatility; a singleluminaire supplied with 3 different opticsto provide different light beams both in lightdistribution and in colour temperature:
3000K 4000K 6000K
LED Power Colour Colour Power consumption Flux of LEDs Flux of*** Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=85 °C) fixture lm lm/W Class Packaging
** 2× 26 226SD4 FUNZIONE3 226 SD 4000K CRI90 12 4 000 >90 13.5 24 1 900 1 500 111 A++ 1
1× 70 170SD3 FUNZIONE3 170 SD 3000K CRI90 22 3 000 >90 24 24 3 400 2 700 113 A++ 1
FUNZIONE3 LED Eco Driver LED Power Colour Colour Power consumption Flux of LEDs Flux of*** Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=85 °C) fixture lm lm/W Class Packaging
** 2× 26 226ED4 FUNZIONE3 226 ED 4000K CRI90 12 4 000 >90 13.5 24 1 900 1 500 111 A++ 1
1× 70 170ED3 FUNZIONE3 170 ED 3000K CRI90 22 3 000 >90 24 24 3 400 2 700 113 A++ 1
FUNZIONE3 LED CCT Switch – Eco Driver LED Power Colour Colour Power consumption Flux of LEDs Flux of*** Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=85 °C) fixture lm lm/W Class Packaging
** 2× 26 226EDMC FUNZIONE3 226 ED MULTICOLOR CRI90 12 3 000, 4 000, 6 000 >90 13.5 24 1 900 1 500 111 A++ 1
1× 70 170EDMC FUNZIONE3 170 ED MULTICOLOR CRI90 22 3 000, 4 000, 6 000 >90 24 24 3 400 2 700 113 A++ 1
67
INTELLIGENT PHOTOSENSOR
Autodimmer Natural Light
Autodimmer Dynamic Light
Smartphone Interface to control and set up system
MODULEMODULE
DOMOTIC
1. 2. 3.
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
DOW
NLI
GHT
20090 ADAPTER RING 240 DWL LED 20091 CEILING ACCESSORY DWL LED 20098 WIDE DIFFUSER DWL/RL08 LED
Accessories to be ordered separately Order code Description
Power* W Installation Weight kg
2× 26 Recessed 1.9 2× 26 Ceiling 3.2 2× 26 Recessed with ring 2.2
20102 BUILDING AUTOMATION CENTRAL UNIT 20124 BUILDING AUTOMATION CENTRAL UNIT WIFI 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE 15024 DALI MODULE 15034 1-10V MODULE
Building automation to be ordered separately Order code Description
270
168
110
11
272
146
recessed version with adapter ring for holes from 200 to 240 mm
235
168
110
10
recessed version for holes from 170 to 200 mm
ceiling version
45
31239
Electronic control gear
68
D226 LEDDownlight
Downlight with very high light output. The optical system allows maxi-mized illumination with excellent anti-glare features, so it is also suitablein the presence of video terminals. The control gear is independent ofthe fixture and is supplied already wired to the optical compartment,complete with cable ties.The particular diffusion of the heat of products with LED sources con-siderably reduces the overheating of the illuminated surfaces, thus ensuring greater environmental comfort and less impact on the illumi-nated objects. Together with the substantial absence of UV radiation,these features make the product particularly suitable for exhibitionareas.An additional accessory is available for lighting the source and theLEDs of the device in the event of a black-out.
960°CIP20
SMARTDRIVER
15039 OPTICOM PHOTOSENSOR
Accessories supplied Order code Description
GENERAL CHARACTERISTICS
Equivalent Power* 2× 26 W
Power supply 93–265 VAC 50/60 Hz176–250 VDC
Standard EN 60598-1, EN 60598-2-2,EN 60598-2-22 (fundamental
requirements), EN 62471
Protection grade IP20
Working temp. -20 °C ÷ +40 °C
Mounting recessed, ceiling
Housing Die-cast aluminium white RAL 9003
Optic sheet metal parabolic
Driver SELV electronic SD (cos j ≥ 0.96) Electronic with intelligent dimming
MTBF Control gear** 80 000 h
Luminous flux >70 000 h (L80B20) maintenance**
Colour deviation 3 SDCM
* Equivalent power for comparison with fluorescent tube fixtures** At environmental reference temperature of 25 °C
C0-C180 C90-C270
105
90
75
60
45
3015 0 15
cd/klm
300
200
500
C0-C180 C90-C270
105
90
75
60
45
3015 0 15
cd/klm
270
360
180
90
450
with wide Louvre DWL/RL08 LEDOrder code 20098
20091 to be ordered separately
CEILING MOUNTING
20090 to be ordered separately
ADAPTER RING
20098 to be ordered separately
WIDE DIFFUSER
Recess hole dimensions: Ø 200–240 mm
INTELLIGENT PHOTOSENSOR
Autodimmer Natural Light
Autodimmer Dynamic Light
Smartphone Interface to control and set up system
MODULEMODULE
DOMOTIC
1. 2. 3.
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
69
Efficiency and dimming
The increase in luminous efficacy (lm/W) andthe useful life of the device may vary signifi-cantly according to the degree to which it isdimmed. Assuming an average level of 50%of the luminous flux, the following results areobtained with the D226 LED:
Dimming 50 %Device duration +40 %Luminous efficiency +15 %
SPECIAL VARIANTS: COLOUR TEMPERATURE ON REQUEST, COLOUR RENDERING ≥90Contact the Beghelli sales network
* Indicative power for comparison with fluorescent tube fixtures
D226 LED SmartDriver LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
2× 26 D226SD DWL SPOT LED 2x26 INC SD 4K 16 4 000 >80 20 40 2 200 1 860 93 A++ 1
DOW
NLI
GHT
Polar Diagram Polar Diagram
INVERTER
19358 INVERTER PLUG&LIGHT LED SE/SA 1H 20-60V to be ordered separately
19359 INVERTER PLUG&LIGHT LED SE/SA 3H 20-60V to be ordered separately
19355* INVERTER LED AT/LG 6W 55V 123H to be ordered separately
19372* INVERTER LED AT/LG 8W 55V 123H to be ordered separately
19390* INVERTER EXT AT/LG 15W 55V 0,75-1-2-3-8H LTO to be ordered separately
19391* INVERTER EXT AT/LG 15W 55V 0,75-1-2-3-8H LiFe to be ordered separately
EMERGENCY WITH LED INVERTER ATTR LG LGFM
* IP65 cover (order code 19376) is needed for the installation LGFM Module 19375
45
31239
270
168
11011
Electronic control gear
272
146
recessed version with adapter ring for holesfrom 200 to 240 mm
235
168
110
10
recessed version for holes from 170 to 200 mm
ceiling version
Power* W Mounting Weight kg
150/70 Recessed 1.9 150/70 Ceiling 3.2 150/70 Recessed with ring 2.2
20102 BUILDING AUTOMATION CENTRAL UNIT 20124 BUILDING AUTOMATION CENTRAL UNIT WIFI 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE 15024 DALI MODULE 15034 1-10V MODULE
Building automation to be ordered separately Order code Description
SMARTDRIVER
D170/1150 LEDDownlight
This revolutionary Downlight range sprang from the need to optimizelighting on the ground while reducing glare as much possible. Thepatented optical system consists of a primary louvre with very highreflectance and a secondary louvre for controlling glare, so it is alsosuitable in the presence of video terminals. The control gear isindependent of the fixture and is supplied already wired to the opticalcompartment, complete with cable ties.The particular diffusion of the heat of products with LED sources con-siderably reduces the overheating of the illuminated surfaces, thus en-suring greater environmental comfort and less impact on the illuminatedobjects. Together with the substantial absence of UV radiation, thesefeatures make the product particularly suitable for exhibition areas.An additional accessory is available for lighting the LED source of thedevice in the event of a black-out.
960°CIK05IP20
GENERAL CHARACTERISTICS
Equivalent Power* 1× 70, 1× 150 W
Power supply 93–265 VAC 50/60 Hz176–250 VDC
Standard EN 60598-1, EN 60598-2-2,EN 60598-2-22 (fundamental
requirements), EN 62471
Protection grade IP20
Working temp. -20 °C ÷ +40 °C
Mounting recessed, ceiling
Housing Die-cast aluminium white RAL 9003
Optic sheet metal parabolic
Driver SELV electronic SD (cos j ≥ 0.96) Electronic with intelligent dimming
MTBF Control gear** 80 000 h
Luminous flux >70 000 h (L80B20) maintenance**
Colour deviation 3 SDCM
* Equivalent power for comparison with fluorescent tube fixtures** At environmental reference temperature of 25 °C
70
20090 ADAPTER RING 240 DWL LED 20091 CEILING ACCESSORY DWL LED 20098 WIDE DIFFUSER DWL/RL08 LED
Accessories to be ordered separately Order code Description
15039 OPTICOM PHOTOSENSOR
Accessories supplied Order code Description
20091 to be ordered separately
CEILING MOUNTING
20090 to be ordered separately
ADAPTER RING
20098 to be ordered separately
WIDE DIFFUSER
Recess hole dimensions: Ø 200–240 mm
C0-C180 C90-C270
105
90
75
60
45
30
15 0 15
cd/klm
400
600
800
1200
C0-C180 C90-C270
105
90
75
60
45
3015 0 15
cd/klm
270
360
180
90
450
with wide Louvre DWL/RL08 LEDOrder code 20098
71
INTELLIGENT PHOTOSENSOR
Autodimmer Natural Light
Autodimmer Dynamic Light
Smartphone Interface to control and set up system
MODULEMODULE
DOMOTIC
1. 2. 3.
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
Efficiency and dimming
The increase in luminous efficacy (lm/W) andthe useful life of the device may vary signifi-cantly according to the degree to which it isdimmed. Assuming an average level of 50%of the luminous flux, the following results areobtained with the D170/1150 LED:
Dimming 50 %Device duration +40 %Luminous efficiency +20 %
SPECIAL VARIANTS: COLOUR TEMPERATURE ON REQUEST, COLOUR RENDERING ≥90Contact the Beghelli sales network
* Indicative power for comparison with fluorescent tube fixtures
D170/1150 LED SmartDriver LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
70 D170SD DWL SPOT LED 1x70 INC SD 3K 38 3 000 >80 43 48 4 900 4 000 93 A++ 1
150 D1150SD DWL SPOT LED 1x150 INC SD 3K 47 3 000 >80 52 24 6 700 5 500 106 A++ 1
DOW
NLI
GHT
Polar Diagram Polar Diagram
INVERTER
19358 INVERTER PLUG&LIGHT LED SE/SA 1H 20-60V to be ordered separately
19359 INVERTER PLUG&LIGHT LED SE/SA 3H 20-60V to be ordered separately
19355* INVERTER LED AT/LG 6W 55V 123H to be ordered separately
19372* INVERTER LED AT/LG 8W 55V 123H to be ordered separately
19390* INVERTER EXT AT/LG 15W 55V 0,75-1-2-3-8H LTO to be ordered separately
19391* INVERTER EXT AT/LG 15W 55V 0,75-1-2-3-8H LiFe to be ordered separately
EMERGENCY WITH LED INVERTER ATTR LG LGFM
* IP65 cover (order code 19376) is needed for the installation LGFM Module 19375
L
ø 170–200
H
max
15
mm
50 mm(150 W)
ø 210 mm (optional)
ø 170 mm (standard)
50 mm
α
Ø 170
GENERAL CHARACTERISTICS
Equivalent Power* 1× 70, 1× 150 W
Power supply 93–265 VAC 50/60 Hz176–250 VDC
Standard EN 60598-1, EN 60598-2-2,EN 60598-2-22 (fundamental
requirements), EN 62471
Protection grade IP40, IP20
Working temp. -20 °C ÷ +40 °C
Mounting recessed in false ceilings
Housing Polyester powder coated die-cast aluminium RAL 9003
Louvre white PC with high reflectance (70° supplied, 16°, 24° and 40° mirror finished aluminium to be ordered separately)
Diffuser Toughened glass 3 mm thick
Driver SELV electronic SD (cos j ≥ 0.97) Electronic with intelligent dimming
MTBF Control gear** 80 000 h
Luminous flux 60 000 h (1× 150 W) (L80B20) maintenance** 70 000 h (1× 70 W) (L80B20)
Colour deviation 3 SDCM
* Equivalent power for comparison with metal halide fixtures** At environmental reference temperature of 25 °C
1233 LOUVRE 16° DWL OR 1234 LOUVRE 24° DWL OR 1235 LOUVRE 40° DWL OR 14120 CONTROL GEAR 5 LED 14121 1 LED NOCTURNAL MODULE
Accessories to be ordered separately Order code Description
Power* • Dimensions (mm) • a Weight W L A B C H max max kg
1× 70 233 45 239 31 150 60° 2.31× 150 233 45 239 31 150 60° 2.3
Building automation to be ordered separately Order code Description
20102 BUILDING AUTOMATION CENTRAL UNIT 20124 BUILDING AUTOMATION CENTRAL UNIT WIFI 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE 15024 DALI MODULE 15034 1-10V MODULE
45
31239
Electronic Power supply
72
D170/1150 LED adjustableDownlight
Die-cast aluminium spotlight with high-efficiency LED source, whitepowder coated. Power supply box separate from the fixture for greatermounting flexibility and better heat dissipation. Quick coupling connec-tion terminal board. White louvre with very high reflectance and com-plex geometry for a high light output (>97%), with highly transparenttoughened glass. Optics adjustable through 345° and tilting with max-imum inclination 60°.An additional accessory is available for lighting the LED source of thedevice in the event of a black-out and an optional nocturnal lamp withlenticular optic for maximizing lighting on the ground. The adjustableDWL LED has been designed specifically for retail lighting, where it isessential to enhance the items on display. Due to this particularfeature it does not offer dimming with an AutoDimmer Sensor.
SMARTDRIVER
SPECIAL VARIANTS: COLOUR TEMPERATURE ON REQUEST, COLOUR RENDERING ≥90Contact the Beghelli sales network
650°CIK05IP40IP20
INVERTER
19358 INVERTER PLUG&LIGHT LED SE/SA 1H 20-60V to be ordered separately
19359 INVERTER PLUG&LIGHT LED SE/SA 3H 20-60V to be ordered separately
19355* INVERTER LED AT/LG 6W 55V 123H to be ordered separately
19372* INVERTER LED AT/LG 8W 55V 123H to be ordered separately
19390* INVERTER EXT AT/LG 15W 55V 0,75-1-2-3-8H LTO to be ordered separately
19391* INVERTER EXT AT/LG 15W 55V 0,75-1-2-3-8H LiFe to be ordered separately
EMERGENCY WITH LED INVERTER ATTR LG LGFM
* IP65 cover (order code 19376) is needed for the installation LGFM Module 19375
*** The power consumption has an auto derating to the power indicated in parenthesys if the product is powered by voltage less than 110 VAC.
1233 LOUVRE 16° DWL OR to be ordered separately
1234 LOUVRE 24° DWL OR to be ordered separately
1235 LOUVRE 40° DWL OR to be ordered separately
LOUVRE 16°, 24°, 40°
14121 1 LED NOCTURNAL MODULE to be ordered separately
14120 5 LED CONTROL GEAR to be ordered separately
MOUNTING WITH NOCTURNAL/EMERGENCY LAMP
MODULEMODULE
DOMOTIC
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
73
Efficiency and dimming
The increase in luminous efficacy (lm/W) andthe useful life of the device may vary signifi-cantly according to the degree to which it isdimmed. Assuming an average level of 50%of the luminous flux, the following results areobtained with the D170/1150 LED:
Dimming 50 %Device duration +40 %Luminous efficiency +15 %
I max 70w*= 10 100 Cd / I max 150w*= 18 700 Cd
Ø 0.16 m 40 338 lx0.5 m
Ø 0.32 m 10 084 lx1.0 m
Ø 0.49 m 4 482 lx1.5 m
Ø 0.65 m 2 521 lx2.0 m
Ø 0.81 m 1 614 lx2.5 m
Ø 0.97 m 1 120 lx3.0 m
Beam width 16°DiameterDistance Luminosity
I max 70w*= 10 100 Cd / I max 150w*= 18 700 Cd
Ø 0.20 m 40 846 lx0.5 m
Ø 0.40 m 10 212 lx1.0 m
Ø 0.59 m 4 538 lx1.5 m
Ø 0.79 m 2 553 lx2.0 m
Ø 0.99 m 1 634 lx2.5 m
Ø 1.19 m 1 135 lx3.0 m
Beam width 24°DiameterDistance Luminosity
I max 70w*= 4 950 Cd / I max 150w*= 9 150 Cd
Ø 0.34 m 19 774 lx0.5 m
Ø 0.68 m 4 944 lx1.0 m
Ø 1.02 m 2 197 lx1.5 m
Ø 1.35 m 1 236 lx2.0 m
Ø 1.70 m 791 lx2.5 m
Ø 2.04 m 549 lx3.0 m
Beam width 40°DiameterDistance Luminosity
Beam width 70°DiameterDistance Luminosity
I max 70w*= 2 200 Cd / I max 150w*= 4 100 Cd
Ø 0.65 m 8 826 lx0.5 m
Ø 1.30 m 2 207 lx1.0 m
Ø 1.95 m 981 lx1.5 m
Ø 2.60 m 552 lx2.0 m
Ø 3.25 m 353 lx2.5 m
Ø 3.90 m 245 lx3.0 m
OPTICS SUPPLIED
LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
1× 70 D170LORSD DWL LED 1x70 OR INC SD 3K 29 3 000 >80 34 1 (COB) 4 000 3 400 100 A++ 1
1× 150 D1150LORSD DWL LED 1x150 OR INC SD 3K 50 3 000 >80 55(50***) 1 (COB) 6 500 5 500 100 A++ 1
D170/1150 LED adjustable SmartDriver
DOW
NLI
GHT
GENERAL CHARACTERISTICS
Equivalent Power* 1× 35, 1× 70 W
Power supply 93–265 VAC 50/60 Hz176–250 VDC
Standard EN 60598-1, EN 60598-2-2,EN 60598-2-22 (fundamental
requirements), EN 62471
Protection grade IP42
Working temp. -20 °C ÷ +40 °C
Mounting recessed in false ceilings
Housing Polyester powder coated die-cast aluminium RAL 9003
Diffuser Tempered glass 3 mm thick
Driver SELV electronic SD (cos j ≥ 0.96) Electronic with intelligent dimming
MTBF Control gear** 80 000 h
Luminous flux >50 000 h (1× 70) (L80B20) maintenance** >60 000 h (1× 35) (L80B20)
Colour deviation 3 SDCM
* Equivalent power for comparison with fluorescent tube fixtures** At environmental reference temperature of 25 °C
L
B
H
60°
0°
30°
60°
125
230
1× 35 250 160 114 39° 1.6 1× 70 250 160 114 39° 1.6
Power * • Dimensions (mm) • Beam Weight W L B H width max kg
SMARTDRIVER
960°CIP42
45
31239
Electronic control gear
Recess hole
74
WW135/170 LEDDownlight – Wall washer
Downlight for vertical surfaces. The optics allow maximized wall illumi-nation while maintaining excellent anti-glare characteristics thanks tothe microprismatic diffuser. The louvre can be oriented on an axis. Thecontrol gear is independent of the fixture and is supplied already wiredto the optical compartment, complete with cable ties.The particular diffusion of the heat of products with LED sources con-siderably reduces the overheating of the illuminated surfaces, thus ensuring greater environmental comfort and less impact on the illumi-nated objects. Together with the substantial absence of UV radiation,these features make the product particularly suitable for exhibitionareas, both in retail outlets and in museums. Due to this particularfeature it does not offer dimming with an AutoDimmer Sensor.An additional accessory is available for lighting the LED source of thedevice in the event of a black-out.
20102 BUILDING AUTOMATION CENTRAL UNIT 20124 BUILDING AUTOMATION CENTRAL UNIT WIFI 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE 15024 DALI MODULE 15034 1-10V MODULE
Building automation to be ordered separately Order code Description
Prismatic diffuser glass with hightransmittance allowing the
reduction of glare while keepingthe lighting efficiency unchanged.
75
MODULEMODULE
DOMOTIC
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
Efficiency and dimming
The increase in luminous efficacy (lm/W) andthe useful life of the device may vary signifi-cantly according to the degree to which it isdimmed. Assuming an average level of 50%of the luminous flux, the following results areobtained with the WW135/170 LED:
Dimming 50 %Device duration +40 %Luminous efficiency +15 %
SPECIAL VARIANTS: COLOUR TEMPERATURE ON REQUEST, COLOUR RENDERING ≥90Contact the Beghelli sales network
WW135/170 LED SmartDriver LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
1× 35 WW135SD WW LED 1x35 OR INC SD 3K 18 3 000 >80 23 72 2 700 2 250 100 A++ 1
1× 70 WW170SD WW LED 1x70 OR INC SD 3K 40 3 000 >80 45 72 4 900 4 000 90 A++ 1
DOW
NLI
GHT
Polar Diagram
INVERTER
19358 INVERTER PLUG&LIGHT LED SE/SA 1H 20-60V to be ordered separately
19359 INVERTER PLUG&LIGHT LED SE/SA 3H 20-60V to be ordered separately
19355* INVERTER LED AT/LG 6W 55V 123H to be ordered separately
19372* INVERTER LED AT/LG 8W 55V 123H to be ordered separately
19390* INVERTER EXT AT/LG 15W 55V 0,75-1-2-3-8H LTO to be ordered separately
19391* INVERTER EXT AT/LG 15W 55V 0,75-1-2-3-8H LiFe to be ordered separately
EMERGENCY WITH LED INVERTER ATTR LG LGFM
* IP65 cover (order code 19376) is needed for the installation LGFM Module 19375
GENERAL CHARACTERISTICS
Equivalent Power* 35, 70, 150 W
Power supply 93–265 VAC 50/60 Hz 176–250 VDC
Standard EN 60598-1, EN 60598-2-1,EN 60598-2-22 (fundamental
requirements), EN 62471 (photobiological hazard)
Protection grade IP20 (visible side), IP40 (recessed side)
Working temp. -20 ÷ +40 °C
Mounting recessed
Housing Polyester powder coated die-cast aluminium RAL 9010
Optic Zoom LED System with PMMA transparent lenses
Driver Electronic SD (cos j ≥ 0.96)with intelligent dimming
MTBF Control gear** 80 000 h
Luminous flux >70 000 h (1× 70, 1× 150) (L80B20) maintenance** >80 000 h (1× 35) (L80B20)
Colour deviation 3 SDCM
* Equivalent power for comparison with metal halide fixtures** At environmental reference temperature of 25 °C
SPECIAL VARIANTS: COLOUR TEMPERATURE ON REQUEST, COLOUR RENDERING ≥90 Contact the Beghelli sales network
650°CIP40IP20 IK05
20102 BUILDING AUTOMATION CENTRAL UNIT 20124 BUILDING AUTOMATION CENTRAL UNIT WIFI 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE 15024 DALI MODULE 15034 1-10V MODULE
Building automation to be ordered separately Order code Description
L
B
T1
T2
H
Recess Hole
L
H
T1
T2B
Recess Hole
1× 185 185 85 160 160 1.5 2× 335 185 85 310 160 2.5
Version • Dimensions (mm) • Weight L B H T1 T2 max kg
SMARTDRIVER
Version 2×
14357 INSTALLATION FRAME – FLUSH WALL, TO BE TRIMMED 1X 14358 INSTALLATION FRAME – FLUSH WALL, TO BE TRIMMED 2X
Accessories to be ordered separately Order code Description
76
Floodlight with adjustable focus in die-cast aluminium, incorporatingnine powerful high-efficiency LEDs. Patented optics, consisting of aPMMA lens system with variable focal length to adjust the light beamto an angle between 10° and 40°. The adjustment is continuous, andcan be performed using the rear regulator. The device can be adjustedboth horizontally and vertically. Available in 1× and 2× versions. TheCestello Zoom has been specifically designed for accent lighting, inenvironments where the items on display need to be enhanced. Theflexibility of the device renders it extremely versatile in all architecturalspaces and with any furnishings, and it can be installed flush with thewall using a special accessory. In the 2× versions, each spotlight canbe adjusted independently.
Zoom LEDCestello
Efficiency and dimming
The increase in luminous efficacy (lm/W) andthe useful life of the device may vary signifi-cantly according to the degree to which it isdimmed. Assuming an average level of 50%of the luminous flux, the following results areobtained with the Zoom LED:
Dimming 50 %Device duration +40 %Luminous efficiency +15 %
INVERTER
19358 INVERTER PLUG&LIGHT LED SE/SA 1H 20-60V to be ordered separately
19359 INVERTER PLUG&LIGHT LED SE/SA 3H 20-60V to be ordered separately
19355* INVERTER LED AT/LG 6W 55V 123H to be ordered separately
19372* INVERTER LED AT/LG 8W 55V 123H to be ordered separately
19390* INVERTER EXT AT/LG 15W 55V 0,75-1-2-3-8H LTO to be ordered separately
19391* INVERTER EXT AT/LG 15W 55V 0,75-1-2-3-8H LiFe to be ordered separately
EMERGENCY WITH LED INVERTER ATTR LG LGFM
* IP65 cover (order code 19376) is needed for the installation LGFM Module 19375
2 Version 2× 150 is equipped with dual drivers which require two domotic radio modules to control the device. The two LED sources are managed independently from each other.
Beam width 10°
Ø 0.11 m 119 379 lx0.5 m
Ø 0.22 m 29 845 lx1.0 m
Ø 0.33 m 13 264 lx1.5 m
Ø 0.44 m 7 461 lx2.0 m
Ø 0.66 m 3 316 lx3.0 m
Ø 0.55 m 4 775 lx2.5 m
I max 35w*= 28 800 Cd / I max 70w*= 47 400 Cd
DiameterDistance Luminosity
MINIMUM RANGE OF THE FOCAL LENGTH FOR 10° CONE OF LIGHTMAXIMUM RANGE OF THE FOCAL LENGTH FOR 40° CONE OF LIGHT
Beam width 20°DiameterDistance Luminosity
Ø 0.18 m 49 269 lx0.5 m
Ø 0.36 m 12 317 lx1.0 m
Ø 0.53 m 5 474 lx1.5 m
Ø 0.71 m 3 079 lx2.0 m
Ø 1.07 m 1 369 lx3.0 m
Ø 0.89 m 1 971 lx2.5 m
I max 35w*= 11 900 / I max 70w*= 19 550 Cd
Beam width 30°
Ø 0.29 m 24 656 lx0.5 m
Ø 0.58 m 6 164 lx1.0 m
Ø 0.87 m 2 740 lx1.5 m
Ø 1.15 m 1 541 lx2.0 m
Ø 1.73 m 685 lx3.0 m
Ø 1.44 m 986 lx2.5 m
I max 35w*= 5 950 Cd / I max 70w*= 9 800 Cd
DiameterDistance Luminosity
Beam width 40°
Ø 0.39 m 16 512 lx0.5 m
Ø 0.78 m 4 128 lx1.0 m
Ø 1.16 m 1 835 lx1.5 m
Ø 1.55 m 1 032 lx2.0 m
Ø 2.33 m 459 lx3.0 m
Ø 1.94 m 660 lx2.5 m
I max 35w*= 4 000 Cd / I max 70w*= 6 550 Cd
DiameterDistance Luminosity
77
MODULEMODULE
DOMOTIC
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
Zoom LED Cestello SmartDriver LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
1× 35 Z135CSD ZOOM LED CEST 1X35 SD 3K 13 3 000 >80 17 9 1 750 1 400 84 A++ 1/1
1× 70 Z170CSD ZOOM LED CEST 1X70 SD 3K 29 3 000 >80 33 9 3 200 2 500 75 A++ 1/1
1× 150 Z1150CSD ZOOM LED CEST 1X150 SD 3K 47 3 000 >80 51 9 5 000 4 000 77 A++ 1/1
2× 35 Z235CSD ZOOM LED CEST 2X35 SD 3K 26 3 000 >80 29 18 3 500 2 800 98 A++ 1/1
2× 70 Z270CSD ZOOM LED CEST 2X70 SD 3K 55 3 000 >80 61 18 6 400 5 000 82 A++ 1/1
2× 150 Z2150CSD ZOOM LED CEST 2X150 SD 3K 94 3 000 >80 104 18 10 000 8 000 77 A++ 1/12
DOW
NLI
GHT
SPECIAL VARIANTS: COLOUR RENDERING ≥90 – COLOUR TEMPERATURE ON REQUEST – WITH THREE-PHASE THROUGH WIRING – WITH POLYCARBONATE DIFFUSER (HACCP) –SICURO 24 (SLGS) Contact the Beghelli sales network
78
Acciaio Eco LEDIndustrial LED luminaire
Acciaio Eco LED is the reply to the request for products with a hightechnological content for particularly demanding applications in highriskareas. The steel housing and glass diffuser present both excellentmechanical resistance (IK09) and resistance to aggressive chemicalagents. In the industrial field, it is ideally used in installations in environ-ments with an explosive atmosphere, caused either by alterationsof a gaseous type or by the presence of combustible powderssuspended in the air (according to Standard ATEX 2014/34/EU forzones 02 and 22).The optic system is composed of a diffuser subdivided into 12 cellsfor optimal light distribution, and a special microprismatic glass withvery high light transmittance for greater visual comfort.Acciaio Eco LED is suitable for heavy-duty use even in outdoor envi-ronments directly exposed to inclement weather: it is designed to resistmechanical vibrations and electromagnetic disturbances typical ofindustrial environments.
GENERAL CHARACTERISTICS
Equivalent Power* 1× 36, 2× 36, 1× 58, 2× 58, 2× 80 W(TOP, ATEX)
Power supply SD Version: 93–265 VAC 50/60 Hz 176–250 VDC
ED Version: 230 VAC ±10 % 50 Hz
Standard EN 60598-1, EN 60598-2-1,EN 60598-2-22 (fundamentalrequirements), UNI9554:1989,DIN 18032-3:1997-04, EN 62471(Photobiological hazard),ATEX 2014/34/UE
Protection grade IP66, IK09
Working temp. SD Version: -30 °C ÷ +50 °C (****) E and ED Version: -20 °C ÷ +40 °C
Mounting ceiling, suspension, busbar trunking
Housing Polyester powder coated sheet steel RAL 7035 grey
Head Caps Technopolymer PC+PBT
Louvre Wide anti-glare aluminium
Driver SD Version:SELV electronic SD (cos j ≥ 0.96)with intelligent dimming
ED Version:electronic ED (cos j ≥ 0.95)
MTBF Control gear** 80 000 h
Luminous flux >60 000 h (version 2×) (L80B20) maintenance** >70 000 h (version 1×) (L80B20)
Colour deviation 3 SDCM* Equivalent power for comparison with fluorescent tube fixtures** At environmental reference temperature of 25 °C**** At highest working temperature thermal protection may reduce the
output power.
Accessories supplied Order code Description
20107 ACC DIFFUSER 1200 15019 INPUT DOUBLE COUPLING M20 15018 KIT ATEX ACCIAIO ECO (SUPPLIED WITH 2×80 VERSION) 20122 ORIENTABLE BRACKET 20082 MOD EM ACC LED/T5 TR SE1NRM 20085 MOD EM ACC LED/T5 AT/LG SE1/3H 20086 MOD EM ACC LED/T5 LGFM SE1/3H 418319000 CABLE GLAND M20 WITH VENTILATION VALVE
Accessories to be ordered separately Order code Description
IP66
Power* • Dimensions (mm) • Weight W L B H max kg
1× 36 1 225 108 90 3.2 2× 36 1 225 108 90 3.2 1× 58 1 225 108 90 3.2 2× 58 1 225 108 90 3.2 2× 80 1 565 108 90 3.9
L
H
B
20102 BUILDING AUTOMATION CENTRAL UNIT 20124 BUILDING AUTOMATION CENTRAL UNIT WIFI 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE 15024 DALI MODULE 15034 1-10V MODULE
15040 OPTICOM PHOTOSENSOR ACCIAIO
Building automation to be ordered separately Order code Description
SMARTDRIVER 9900lumen
IK09UV-OIL 960°C
79
Acciaio Eco LED SmartDriver LED Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description Power W Temp. K rendering max W N°LEDs lm (Tj=25 °C) fixture lm* Class lm/W Packaging
2× 18 A218ESD ACCIAIO E LED 2x18 SD 4000K 11 4 000 >80 12 32 1 850 1 600 A++ 135 1
1× 36 A136ESD ACCIAIO E LED 1X36 SD 4000K 15 4 000 >80 20 48 3 150 2 700 A++ 135 1
2× 36 A236ESD ACCIAIO E LED 2X36 SD 4000K 30 4 000 >80 35 96 5 570 4 700 A++ 135 1
1× 58 A158ESD ACCIAIO E LED 1X58 SD 4000K 23 4 000 >80 29 72 4 400 3 800 A++ 131 1
2× 58 A258ESD ACCIAIO E LED 2X58 SD 4000K 46 4 000 >80 52 144 8 350 7 000 A++ 135 1
2× 80 A280ESD ACCIAIO TOP LED 2X80 SD 4K 68 4 000 >80 74 (56***) 180 11 800 9 900 A++ 135 1
** 1× 36 A136E ACCIAIO E LED 1X36 D 4000K 17 4 000 >80 22 48 3 150 2 700 A++ 120 1
** 2× 36 A236E ACCIAIO E LED 2X36 D 4000K 35 4 000 >80 40 96 5 570 4 700 A++ 120 1
** 1× 58 A158E ACCIAIO E LED 1X58 D 4000K 26 4 000 >80 32 72 4 400 3 800 A++ 120 1
** 2× 58 A258E ACCIAIO E LED 2X58 D 4000K 52 4 000 >80 58 144 8 350 7 000 A++ 120 1
** Version with electronic Driver with traditional technology*** The power consumption has an auto derating to the power indicated in parenthesys if the product is powered by voltage less than 150 VAC.LED power, LED Flux and output Flux from the device will be reduced in proportion to the power derating.
20082 to be ordered separately
20085 to be ordered separately
20086 to be ordered separately
MODULE FOR EMERGENCY LIGHTING
20122 to be ordered separately
WALL BRACKET
Acciaio Eco LED Eco Driver LED Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description Power W Temp. K rendering max W N°LEDs lm (Tj=25 °C) fixture lm* Class lm/W Packaging
2× 36 A236ED ACCIAIO ED LED 2X36 4000K 34 4 000 >80 36 96 5 400 4 400 A++ 124 1
2× 58 A258ED ACCIAIO ED LED 2X58 4000K 50 4 000 >80 52 144 8 050 6 400 A++ 122 1
INTELLIGENT PHOTOSENSOR
Autodimmer Natural Light
Autodimmer Dynamic Light
Smartphone Interface to control and set up system1. 2. 3.
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
Efficiency and dimming
The increase in luminous efficacy (lm/W) andthe useful life of the device may vary signifi-cantly according to the degree to which it isdimmed. Assuming an average level of 50%of the luminous flux, the following results areobtained with the Acciaio Eco LED:
Dimming 50 %Device duration +40 %Luminous efficiency +10 %
200
300
400
500
90
180
270
360
Polar Diagram EDPolar Diagram SD
INDU
STRI
AL
MODULEMODULE
DOMOTICIN
VERTER
19358 INV PLUG&LIGHT LED SE/SA 1H 20-60V to be ordered separ. (version SD only)
19359 INV PLUG&LIGHT LED SE/SA 3H 20-60V to be ordered separ. (version SD only)
19367 INV PLUG&LIGHT LED SE/SA 1H 60-180V to be ordered separ. (version ED only)
19371 INV PLUG&LIGHT LED SE/SA 3H 60-180V to be ordered separ. (version ED only)
19355 INV LED AT/LG 6W 55V 123h to be ordered separ. (version SD only)
19372 INV LED AT/LG 8W 55V 123H to be ordered separ. (version SD only)
19390 INV EXT AT/LG AR 10W 55V 0,75-1-2-3-8H LTO to be ordered separately(version SD only)
19391 INV EXT AT/LG AR 10W 55V 0,75-1-2-3-8H LiFe to be ordered separately(version SD only)
EMERGENCY WITH LED INVERTER ATTR LG LGFM
LG Inverters can be transformed in LGFM with the accessory code 19375
GENERAL CHARACTERISTICS
Equivalent Power* 2× 36, 2× 58, 2× 80 W
Power supply 93–265 VAC 50/60 Hz 176–250 VDC
Standard EN 60598-1, EN 60598-2-1,EN 60598-2-22 (fundamentalrequirements), UNI9554:1989,DIN 18032-3:1997-04, EN 62471(Photobiological hazard),ATEX 2014/34/UE
Protection grade IP66
Working temp. -30 °C ÷ +50 °C****
Mounting ceiling, suspension, busbar trunking
Body stainless steel Aisi 304
Head Caps die-cast aluminium
Louvre Wide anti-glare aluminium
Screen micro-prismatic Tempered glass
Driver SD Version:SELV electronic SD (cos j ≥ 0.96)with intelligent dimming
MTBF Control gear** 80 000 h
Luminous flux >60 000 h (L80B20) maintenance**
Colour deviation 3 SDCM
* Equivalent power for comparison with metal halide device** At environmental reference temperature of 25 °C**** At highest working temperature thermal protection may reduce the
output power.
15019 INPUT DOUBLE COUPLING M20 20123 ADJUSTABLE WALL BRACKET 20125 POLE MOUNTING BRACKET
Accessories to be ordered separately
Order code Description
20102 BUILDING AUTOMATION CENTRAL UNIT 20124 BUILDING AUTOMATION CENTRAL UNIT WIFI 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE 15024 DALI MODULE 15034 1-10V MODULE
Building automation to be ordered separately Order code Description
– THROUGH WIRING KIT – ATEX KIT
Accessories supplied
Order code Description
15040 OPTICOM PHOTOSENSOR ACCIAIO
Accessories supplied Order code Description
SPECIAL VARIANTS: COLOUR TEMPERATURE ON REQUEST, COLOUR RENDERING ≥90Contact the Beghelli sales network
80
Acciaio Extreme LEDIndustrial LED luminaire
This luminaire is suitable for outdoor installations for particularlydemanding applications in high-risk areas.The stainless steel housingand extruded aluminium terminals grant an excellent mechanicalresistance and resistance to aggressive chemical agents. It is suitablefor installations according to Standard ATEX 2014/34/UE zone 02-22,for through wiring and continuous raw installations.The optic system consists of a reflector subdivided into aluminium cellspreventing any glare and of a microprismatic glass with very high lighttransmittance.This luminaire has a very high oxidation and erosion-corrosion resistance,and it is designed to resist mechanical vibrations and electromagneticdisturbances typical of industrial environments.SMARTDRIVER
IP66 IK09UV-OIL 960°C
H
L B
Power * • Dimensions (mm) • Weight W L B H max kg
2× 36 1 199 109 88 3.3 2× 58 1 199 109 88 3.3 2× 80 1 484 109 88 4.0
81
INTELLIGENT PHOTOSENSOR
Autodimmer Natural Light
Autodimmer Dynamic Light
Smartphone Interface to control and set up system1. 2. 3.
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
Efficiency and dimming
The increase in luminous efficacy (lm/W) andthe useful life of the device may vary signifi-cantly according to the degree to which it isdimmed. Assuming an average level of 50%of the luminous flux, the following results areobtained with the Acciaio Extreme LED:
Dimming 50 %Device duration +40 %Luminous efficiency +10 %
90
180
270
360
Acciaio Extreme LED SmartDriver LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
2× 36 A236EXSD ACCIAIO EX LED 2x36 SD 4000K 32 4 000 ≥80 35 90 5 500 4 700 135 A++ 1
2× 58 A258EXSD ACCIAIO EX LED 2x58 SD 4000K 47 4 000 ≥80 52 144 8 200 7 000 135 A++ 1
2× 80 A280EXSD ACCIAIO EX LED 2x80 SD 4000K 67 4 000 ≥80 74 180 11 600 9 900 135 A++ 1
INDU
STRI
AL
MODULEMODULE
DOMOTIC
Polar Diagram
INVERTER
19358 INVERTER PLUG&LIGHT LED SE/SA 1H 20-60V to be ordered separately
19359 INVERTER PLUG&LIGHT LED SE/SA 3H 20-60V to be ordered separately
19355 INVERTER LED AT/LG 6W 55V 123H to be ordered separately
19372 INVERTER LED AT/LG 8W 55V 123H to be ordered separately
19390 INVERTER EXT AT/LG 15W 55V 0,75-1-2-3-8H LTO to be ordered separately
19391 INVERTER EXT AT/LG 15W 55V 0,75-1-2-3-8H LiFe to be ordered separately
EMERGENCY WITH LED INVERTER ATTR LG LGFM
LG Inverters can be transformed in LGFM with the accessory code 19375
GENERAL CHARACTERISTICS
Equivalent Power* 1× 18, 2× 18, 1× 36, 2× 36, 1× 58,2× 58, 2× 80 W
Power supply SD Version: 93–265 VAC 50/60 Hz
176–250 VDC
ED Version: 230 VAC ±10 % 50 Hz
Standard EN 60598-1, EN 60598-2-1,EN 60598-2-22 (fundamentalrequirements), EN 62471(Photobiological hazard)
Protection grade IP65
Working temp. SD Version: -20 ÷ +50 °C (***)ED Version: -20 ÷ +40 °C
Mounting ceiling, suspension, busbar trunking
Housing Polycarbonate, RAL 7035 light grey
Optic white reflective powder coated steel
Louvre Micro-structured finishedhigh transmission polycarbonate
Driver SD Version:SELV electronic SD (cos j≥ 0.96)with intelligent dimming
ED Version:SELV electronic ED (cos j≥ 0.95)
MTBF Control gear** 80 000 h
Luminous flux >60 000 h (L80B20) maintenance**
Colour deviation 3 SDCM
* Equivalent power for comparison with florescent tube device** At environmental reference temperature of 25 °C*** At highest working temperature thermal protection may reduce the
output power.
Power * • Dimensions (mm) • Weight W L B H H1 I max kg
1× 18, 2× 18 671 170 95 10 475 1.4 1× 36, 2× 36 1 280 170 95 10 660 2.3 1× 58, 2× 58 1 581 170 95 10 900 2.0 2× 80 1 581 170 95 10 900 2.7
3905 PROTECTIVE GRID 18W 8066 PROTECTIVE GRID 36W 8067 PROTECTIVE GRID 58W/80W 3504 BRACKET WALL INSTALLATIONS 3505 HOOKS STAINLESS STEEL INOX 18W (4 pcs) 3506 HOOKS STAINLESS STEEL INOX 36W (8 pcs) 3507 HOOKS STAINLESS STEEL INOX 58W/80W (10 pcs) 8010 KIT WIRING THROUGH 58W/80W 8012 KIT WIRING THROUGH 36W
Accessories to be ordered separately
Order code Description
20102 BUILDING AUTOMATION CENTRAL UNIT 20124 BUILDING AUTOMATION CENTRAL UNIT WIFI 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE 15024 DALI MODULE 15034 1-10V MODULE
Building automation to be ordered separately Order code Description
IP65850°CUV-OIL
HACCP
8500lumen
SMARTDRIVER
15039 OPTICOM PHOTOSENSOR
Accessories supplied Order code Description
IK05
82
Professional fixture with high luminous flux and anti-glare system. It’sable to work in emergency mode if equipped with Plug&Light LEDInverter or addressable logica LED inverter.Smart Driver System for the highest level of flexibility of use due to thevarious additional modules. The Autodimmer Sensor is supplied asstandard in the base product. The self-extinguishing polycarbonatescreeen is stabilized to UV rays. The screen has a micro-structuredanti-glare surface particularly designed to spread the LED light in thebest way.The device is strong and long-lasting with an age-resistant expandedpolyurethane seal and concealed closure hooks made from polyesterbased technopolymer.
BS100 SD LEDIndustrial LED luminaire Autodimmer
Efficiency and dimming
The increase in luminous efficacy (lm/W) andthe useful life of the device may vary signifi-cantly according to the degree to which it isdimmed. Assuming an average level of 50%of the luminous flux, the following results areobtained with the BS100 SD LED:
Dimming 50 %Device duration +40 %Luminous efficiency +15 %
SPECIAL VARIANTS: COLOUR TEMPERATURE ON REQUEST,COLOUR RENDERING ≥90, FOOD APPLICATIONS VERSIONContact the Beghelli sales network
SPECIAL PARKING VERSION
236PSD BS100 LED PARKING 2x36 W
Polar Diagram
POLAR DIAGRAM
83
INTELLIGENT PHOTOSENSOR
Autodimmer Natural Light
Autodimmer Dynamic Light
Smartphone Interface to control and set up system1. 2. 3.
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
*** The power consumption has an auto derating to the power indicated in parenthesys if the product is powered by voltage less than 110 VAC.
BS100 LED PARKING SmartDriver LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
2× 36 236PSD BS100 LED PARKING 2X36 SD 4000K 48 4 000 >80 52 144 7 750 5 500 106 A++ 1
BS100 LED EcoDriver LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
2× 18 218ED BS100 LED 2X18 ED 4000K 18 4 000 >80 20 72 2 900 2 600 132 A++ 1
2× 36 236ED BS100 LED 2X36 ED 4000K 36 4 000 >80 40 144 5 800 5 200 132 A++ 1
2× 58 258ED BS100 LED 2X58 ED 4000K 47 4 000 >80 51 192 7 700 6 800 132 A++ 1
BS100 LED SmartDriver LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
1× 18 118SD BS100 LED 1X18 SD 4000K 9 4 000 >80 11 72 1 900 1 525 133 A++ 1
2× 18 218SD BS100 LED 2X18 SD 4000K 19 4 000 >80 22 72 3 300 2 750 127 A++ 1
1× 36 136SD BS100 LED 1X36 SD 4000K 21 4 000 >80 23 144 4 000 3 000 133 A++ 1
2× 36 236SD BS100 LED 2X36 SD 4000K 42 4 000 >80 46 144 7 000 5 500 121 A++ 1
1× 58 158SD BS100 LED 1X58 SD 4000K 29 4 000 >80 32 180 5 000 4 100 129 A++ 1
2× 58 258SD BS100 LED 2X58 SD 4000K 59 4 000 >80 64 (56***) 180 9 250 7 500 117 A++ 1
2× 80 280SD BS100 LED 2X80 SD 4000K 68 4 000 >80 74 (56***) 180 11 000 8 500 116 A++ 1
INDU
STRI
AL
MODULEMODULE
DOMOTIC
INVERTER
19358 INVERTER PLUG&LIGHT LED SE/SA 1H 20-60V to be ordered separately
19359 INVERTER PLUG&LIGHT LED SE/SA 3H 20-60V to be ordered separately
19355 INVERTER LED AT/LG 6W 55V 123H to be ordered separately
19372 INVERTER LED AT/LG 8W 55V 123H to be ordered separately
19390 INVERTER EXT AT/LG 15W 55V 0,75-1-2-3-8H LTO to be ordered separately
19391 INVERTER EXT AT/LG 15W 55V 0,75-1-2-3-8H LiFe to be ordered separately
EMERGENCY WITH LED INVERTER ATTR LG LGFM
LG Inverters can be transformed in LGFM with the accessory code 19375
GENERAL CHARACTERISTICS
Equivalent Power* 4× 55 W, 6× 55 W and 2× 55 W(version Parking)
Power supply SD Version (code 11288PSD):93–265 VAC 50/60 Hz176–250 VDC
SD Version (code 11288SD, 11289SD): 195–265 VAC 50/60 Hz
176–250 VDC
ED Version: 230 VAC ±10 % 50 Hz
Standard EN 60598-1, EN 60598-2-1,EN 60598-2-22 (fundamental require ments), EN 62471(Photobiological hazard)
Protection grade IP66
Working temp. SD Version: -20 ÷ +50 °C (****) ED Version: -20 ÷ +40 °C
Mounting ceiling, suspension, busbar trunking
Housing Polyester powder coated die-castalumium RAL 7040 grey
Bayonet bracket Die-cast alumium
Optic Wide anti-glare aluminium
Screen Polycarbonate 3mm
Driver SD Version:SELV electronic SD (cos j≥ 0.96)with intelligent dimming
ED Version:SELV electronic ED (cos j≥ 0.95)
MTBF Control gear** 80 000 h
Luminous flux >70 000 h (L80B20) maintenance**
Colour deviation 3 SDCM
* Equivalent power for comparison with fluorescent tube fixtures** At environmental reference temperature of 25 °C**** At highest working temperature thermal protection may reduc
the output power.
Power* • Dimensions (mm) • WeightW L B H max kg
4× 55 443 443 85 5.56× 55 443 443 85 5.52× 55 443 443 85 5.0
12663 SUSPENSION CABLE
Accessories to be ordered separately
Order code Description
20102 BUILDING AUTOMATION CENTRAL UNIT 20124 BUILDING AUTOMATION CENTRAL UNIT WIFI 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE 15024 DALI MODULE 15034 1-10V MODULE
Building automation to be ordered separately Order code Description
IP66850°CUV-OIL
HACCP
SMARTDRIVER
– CEILING BRACKET – SUSPENSION KIT (eyebolts) 12665 BUSBAR TRUNKING BRACKET
Accessories supplied
Order code Description
15039 OPTICOM PHOTOSENSOR
Accessories supplied Order code Description
IK10
84
Die-casting aluminium body and 3mm toughened polycarbonatediffuser to grant a high level of strength and durability from impact ininstallation such as sports halls, or industries or commercial areas.Its bayonet bracket allows a simple and fast installation thus grantingstability and durability of the fixing system.The Parking version provides a wide light beam to illuminate areaswhere the ceiling is low such as parking areas or basements. This opticis in fact designed to deliver optimal, uniform and efficient illuminationallowing to considerably reducing the number of installed luminaires.
BS240 LEDIndustrial LED luminaire
CEILING BRACKET supplied
CEILING BRACKET
L
B
H
BS240 LED Eco Driver LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
4× 55 11288ED BS240 LED 455 ED 4000K 90 4 000 >80 100 240 15 500 13 300 133 A++ 1
6× 55 11289ED BS240 LED 655 ED 4000K 135 4 000 >80 150 360 23 300 20 000 133 A++ 1
2× 55 11288PED BS240 LED 255 PARK ED 4000K 45 4 000 >80 36 192 7 800 6 650 133 A++ 1
INTELLIGENT PHOTOSENSOR
MODULE
MODULE
DOMOTIC
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROLOR DALI / 1-10V SYSTEMS AND EMERGENCY
Autodimmer Natural Light1.
SmartDriver for code 11288PSD
SmartDriver for code 11288SD and 11289SD
SPECIAL VARIANTS: COLOUR TEMPERATURE ON REQUEST, COLOUR RENDERING ≥90Contact the Beghelli sales network
Efficiency and dimming
The increase in luminous efficacy (lm/W) andthe useful life of the device may vary signifi-cantly according to the degree to which it isdimmed. Assuming an average level of 50%of the luminous flux, the following results areobtained with the BS240 LED:
Dimming 50 %Device duration +40 %Luminous efficiency +10 %
INTELLIGENT PHOTOSENSOR
Autodimmer Natural Light
Autodimmer Dynamic Light
Smartphone Interface to control and set up system1. 2. 3.
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
BS240 LED SmartDriver LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
4× 55 11288SD BS240 LED 455 SD 4000K 90 4 000 >80 100 240 15 500 13 300 133 A++ 1
6× 55 11289SD BS240 LED 655 SD 4000K 135 4 000 >80 150 360 23 300 20 000 133 A++ 1
2× 55 11288PSD BS240 LED 255 PARK SD 4000K 45 4 000 >80 50 192 7 800 6 650 133 A++ 1
85
INDU
STRI
AL
MODULEMODULE
DOMOTIC
C0-C180 C90-C270
90
75
105
45
60
3015 0 15
cd/klm
C0-C180 C90-C270
90
105
45
60
3015 0 15
75
BS240 LED(4× 55 W and 6× 55 W)
cd/klm
BS240 LED 2× 55 W parking
INVERTER
19358 INVERTER PLUG&LIGHT LED SE/SA 1H 20-60V to be ordered separately
19359 INVERTER PLUG&LIGHT LED SE/SA 3H 20-60V to be ordered separately
19355 INVERTER LED AT/LG 6W 55V 123H to be ordered separately
19372 INVERTER LED AT/LG 8W 55V 123H to be ordered separately
19390 INVERTER EXT AT/LG 15W 55V 0,75-1-2-3-8H LTO to be ordered separately
19391 INVERTER EXT AT/LG 15W 55V 0,75-1-2-3-8H LiFe to be ordered separately
EMERGENCY WITH LED INVERTER ATTR LG LGFM
LG Inverters can be transformed in LGFM with the accessory code 19375
GENERAL CHARACTERISTICS
Equivalent Power* 250, 400 W
Power supply 195–265 VAC 50/60 Hz 176–250 VDC
Standard EN 60598-1, EN 60598-2-1,EN 60598-2-22 (fundamental
requirements), EN 62471 (Photobiological hazard)
Protection grade IP66 with ventilation valve, IK09
Working temp. -30 °C ÷ +60 °C****
Mounting ceiling, suspension, busbar trunking
Housing Die-cast aluminium RAL 7040 white
Optic Sheet metal with parabolic development in anti-iridescent, mirror finished, anodised aluminium, Wide, Concentrating, Ellipsoidal
Diffuser*** Prismatic toughened glass 4 mm thick
Driver SELV electronic SD (cos j ≥ 0.97) Electronic with intelligent dimming
MTBF Control gear** 100 000 h
Luminous flux >60 000 h (1× 400 W) (L80B20) maintenance** >70 000 h (1× 250 W) (L80B20)
Colour deviation 3 SDCM
* Equivalent power for comparison with metal halide fixtures** At environmental reference temperature of 25 °C*** Available on request polycarbonate optic diffuser**** At highest working temperature thermal protection may reduce the
output power.
The H250/400 LED is a fixture of the latest generation able to combinethe advantages of the LED light source with state-of-the-art opticsystems, as regards both performance and flexibility of application.The LED sources used, with very high efficiency, allow mounting atheights of more than 12 metres. The diffuser has an wide and uniformarea of emission, allowing very low luminosity and therefore reducedglare with high visual comfort. The excellent mechanical characteristics(IP66-IK09) allow installation even in heavy-duty industrial environ-ments. The fixture is available with three different optic modes: con-centrating, wide and elliptical beam.Unlike traditional industrial high bay fixtures, the H250/400 LED ischaracterized by very compact dimensions, especially the height, whichmake it the ideal solution for sheds where there are overhead cranes orother moving structures. The fixture is designed to resist magnetic dis-turbances typical of industrial environments (EN 61000-6-2). In the ver-sions with dimming, to ensure maximum energy saving, self-adaptingtechnology is used on the sensor integrated in the fixture, to automati-cally adjust the emission of light according to the reading of the naturallight present on the work surface.A LED INVERTER is also available which transforms the fixture into anemergency maintained fixture, to light a section of the LED source inthe event of a black-out.
– ANTI-VANDAL SCREWS 418319000 CABLE GLAND M20 WITH VENTILATION VALVE
Accessories supplied Order code Description
12658 PROTECTIVE GRID 12659 ELECTRIFIED TRACK BRACKET 12663 HIGH BAY SUSPENSION CABLES 12664 CEILING BRACKET 99-0205 HIGH BAY SUSPENSION CHAINS (1 m) 99-0206 HIGH BAY SUSPENSION CHAINS (2 m)
Accessories to be ordered separately Order code Description
L
B
H
250 425 413 121 7.7 400 425 413 121 7.7
Power * • Dimensions (mm) • Weight W L B H max kg
IK09 UV-OILIP66
SMARTDRIVER
15039 OPTICOM PHOTOSENSOR
Accessories supplied Order code Description
30000lumen
86
H250/400 LEDHigh Bay
960°C
SPECIAL VARIANTS: COLOUR TEMPERATURE ON REQUEST Contact the Beghelli sales network
20102 BUILDING AUTOMATION CENTRAL UNIT 20124 BUILDING AUTOMATION CENTRAL UNIT WIFI 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE 15024 DALI MODULE 15034 1-10V MODULE
Building automation to be ordered separately Order code Description
INTELLIGENT PHOTOSENSOR
MODULE
MODULE
DOMOTIC
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL ORDALI / 1-10V SYSTEMS AND EMERGENCY
SUSPENDED MOUNTING
12664 to be ordered separately 12663 to be ordered separately
99-0205 to be ordered separately
99-0206 to be ordered separately
CEILING MOUNTING BRACKET
12659 to be ordered separately
ELECTRIFIED TRACK MOUNTINGBRACKET
Elliptical opticWide optic Concentrating optic
H250/400 LED SmartDriver LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description Optic W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
250 H250SD RIF LED 250 DIFF SD 4000K WIDE 110 4 000 >80 119 256 18 500 16 000 134 A++ 1
400 H400SD RIF LED 400 DIFF SD 4000K WIDE 216 4 000 >80 234 512 35 000 30 000 128 A++ 1
250 H250CSD RIF LED 250 CONC SD 4000K CONCENTRATING 110 4 000 >80 119 256 18 500 16 000 134 A++ 1
400 H400CSD RIF LED 400 CONC SD 4000K CONCENTRATING 216 4 000 >80 234 512 35 000 30 000 128 A++ 1
250 H250ESD RIF LED 250 ELLIT SD 4000K ELLIPTICAL 110 4 000 >80 119 256 18 500 16 000 134 A++ 1
400 H400ESD RIF LED 400 ELLIT SD 4000K ELLIPTICAL 216 4 000 >80 234 512 35 000 30 000 128 A++ 1
Autodimmer Natural Light1.
Efficiency and dimming
The increase in luminous efficacy (lm/W) andthe useful life of the device may vary signifi-cantly according to the degree to which it isdimmed. Assuming an average level of 50%of the luminous flux, the following results areobtained with the H250/400 LED:
Dimming 50 %Device duration +40 %Luminous efficiency +10 %
87
INDU
STRI
AL
INVERTER
19377 INVERTER PLUG&LIGHT LED SE/SA 1H 20-60V IP65 to be ordered separately
19368 INVERTER PLUG&LIGHT LED SE/SA 1H 20-60V IP65 to be ordered separately
19355* INVERTER LED AT/LG 6W 55V 123H to be ordered separately
19372* INVERTER LED AT/LG 8W 55V 123H to be ordered separately
19390* INVERTER EXT AT/LG 15W 55V 0,75-1-2-3-8H LTO to be ordered separately
19391* INVERTER EXT AT/LG 15W 55V 0,75-1-2-3-8H LiFe to be ordered separately
EMERGENCY WITH LED INVERTER ATTR LG LGFM
* IP65 cover (order code 19376) is needed for the installation LGFM Module 19375
IP66
GENERAL CHARACTERISTICS
Equivalent Power* 250, 400 W
Power supply 195–265 VAC 50/60 Hz 176–250 VDC
Standard EN 60598-1, EN 60598-2-1,EN 60598-2-22 (fundamentalrequirements), EN 62471(Photobiological hazard)
Protection grade IP66 with ventilation valve, IK09
Working temp. -30 ÷ +60 °C (****)
Mounting on the ground, wall, spotlight towers
Housing Die-cast aluminium RAL 7040 grey
Louvre Sheet metal with parabolic developmentin anti-iridescent, mirror finished,anodised aluminium, symmetrical
Diffuser*** Prismatic toughened glass 4 mm thick
Driver SELV electronic SD (cos j ≥ 0.97) Electronic with intelligent dimming
MTBF Control gear** 100 000 h
Luminous flux >60 000 h (1× 400 W) (L80B20) maintenance** >70 000 h (1× 250 W) (L80B20)
Colour deviation 3 SDCM
* Equivalent power for comparison with metal halide fixtures** At environmental reference temperature of 25 °C*** Available on request polycarbonate optic diffuser**** At highest working temperature thermal protection may reduce the
output power.
The F250/F400 LED is a fixture of the latest generation able to combinethe advantages of the LED light source with state-of-the-art opticsystems, as regards both performance and flexibility of application.The LED sources used, with very high efficiency, produce unprece-dented lighting that allows the illumination of building façades or hard-stands, even at considerable distance. The diffuser has an ample anduniform area of emission, allowing very low luminosity and thereforereduced glare with high visual comfort. The excellent mechanical char-acteristics (IP66-IK09) allow installation in outdoor settings even in ex-treme conditions, while the possibility of versions with a symmetricalor asymmetrical beam makes the fixture particularly versatile.The “square cut” design of the FH350 LED allows movements through360°, on the axis of rotation of the goniometric bracket, thus enablinggreat flexibility of movement and mounting.In the versions with intelligent dimming, to ensure maximum energysaving, self-adapting technology is used on the sensor integrated inthe fixture, to automatically adjust the emission of light according tothe reading of the natural light present on the work surface.A LED INVERTER is also available which transforms the fixture into anemergency maintained fixture, to light a section of the LED source inthe event of a black-out.
12661 POST HEAD 2× 60-76 12662 POST HEAD 4× 60-76 12658 PROTECTIVE GRID
Accessories to be ordered separately Order code Description
L
B
H
250 438 434 121 8.8 400 438 434 121 8.8
Power * • Dimensions (mm) • Weight W L B H max kg
IK09 UV-OIL
SMARTDRIVER 30000lumen
– ANTI-VANDAL SCREWS – GONIOMETRIC BRACKET 418319000 CABLE GLAND M20 WITH VENTILATION VALVE
Accessories supplied Order code Description
F250/400 LEDFloodlight
88
960°C
20102 BUILDING AUTOMATION CENTRAL UNIT 20124 BUILDING AUTOMATION CENTRAL UNIT WIFI 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE 15024 DALI MODULE 15034 1-10V MODULE
Building automation to be ordered separately Order code Description
15039 OPTICOM PHOTOSENSOR
Accessories supplied Order code Description
12658 PROTECTIVE GRID
12661 POST HEAD 2× 60-76 to be ordered separately
12662 POST HEAD 4× 60-76 to be ordered separately
POST MOUNTING
F250/400 LED SmartDriver
WALL MOUNTINGGROUND MOUNTING PROTECTIVE GRID GONIOMETRIC BRACKET
LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description Optic W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
250 F250SSD PRO LED 250 SM SD 4000K SYMMETRIC 110 4 000 >80 119 256 18 500 16 000 134 A++ 1
400 F400SSD PRO LED 400 SM SD 4000K SYMMETRIC 216 4 000 >80 234 512 35 000 30 000 128 A++ 1
250 F250ASD PRO LED 250 AS SD 4000K ASYMMETRIC 110 4 000 >80 119 256 18 500 16 000 134 A++ 1
400 F400ASD PRO LED 400 AS SD 4000K ASYMMETRIC 216 4 000 >80 234 512 35 000 30 000 128 A++ 1
89
INTELLIGENT PHOTOSENSOR
MODULEOPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROLOR DALI / 1-10V SYSTEMS AND EMERGENCY
Autodimmer Natural Light1.
SPECIAL VARIANTS: COLOUR TEMPERATURE ON REQUEST, COLOUR RENDERING ≥90Contact the Beghelli sales network
Efficiency and dimming
The increase in luminous efficacy (lm/W) andthe useful life of the device may vary signifi-cantly according to the degree to which it isdimmed. Assuming an average level of 50%of the luminous flux, the following results areobtained with the F250/400 LED:
Dimming 50 %Device duration +40 %Luminous efficiency +10 %
Symmetrical optics Asymmetrical optics
MODULE
DOMOTIC
Polar Diagram Polar Diagram
FLOO
DLIG
HT
INVERTER
19377 INVERTER PLUG&LIGHT LED SE/SA 1H 20-60V IP65 to be ordered separately
19368 INVERTER PLUG&LIGHT LED SE/SA 1H 20-60V IP65 to be ordered separately
19355* INVERTER LED AT/LG 6W 55V 123H to be ordered separately
19372* INVERTER LED AT/LG 8W 55V 123H to be ordered separately
19390* INVERTER EXT AT/LG 15W 55V 0,75-1-2-3-8H LTO to be ordered separately
19391* INVERTER EXT AT/LG 15W 55V 0,75-1-2-3-8H LiFe to be ordered separately
EMERGENCY WITH LED INVERTER ATTR LG LGFM
* IP65 cover (order code 19376) is needed for the installation LGFM Module 19375
IP66
GENERAL CHARACTERISTICS
Equivalent Power* 350 W
Power supply 195–265 VAC 50/60 Hz 176–250 VDC
Standard EN 60598-1, EN 60598-2-1,EN 60598-2-22 (fundamental
requirements), EN 62471 (Photobiological hazard)
Protection grade IP66 with ventilation valve, IK09
Working temp. -30 ÷ +60 °C (****)
Mounting on the ground, wall, spotlight towers suspension
Housing Die-cast aluminium RAL 7040 grey
Louvre Sheet metal with parabolic development in anti-iridescent, mirror finished, anodised aluminium, symmetrical
Diffuser Prismatic toughened glass 4 mm thick
Driver SELV electronic SD (cos j ≥ 0.97)Electronic with intelligent dimming
MTBF Control gear** 100 000 h
Luminous flux >70 000 h (L80B20) maintenance**
Colour deviation 3 SDCM
* Equivalent power for comparison with metal halide fixtures** At environmental reference temperature of 25 °C**** At highest working temperature thermal protection may reduce the
output power.
FH 350 LED is a fixture of the latest generation able to combine theadvantages of the LED light source with state-of-the-art optic systems,as regards both performance and flexibility of application.The LED sources used, with very high efficiency, produce unprece-dented lighting that allows the illumination of building façades orhardstands, even at considerable distance. The diffuser has an ampleand uniform area of emission, allowing very low luminosity and there-fore reduced glare with high visual comfort. The excellent mechanicalcharacteristics (IP66-IK09) allow installation in outdoor settings even inextreme conditions, while the possibility of versions with a symmetricalor asymmetrical beam makes the fixture particularly versatile.The “square cut” design of the FH350 LED allows movements through360°, on the axis of rotation of the goniometric bracket, thus enablinggreat flexibility of movement and mounting.In the versions with intelligent dimming, to ensure maximum energysaving, self-adapting technology is used on the sensor integrated inthe fixture, to automatically adjust the emission of light according tothe reading of the natural light present on the work surface.
– ANTI-VANDAL SCREWS – GONIOMETRIC BRACKET 418319000 CABLE GLAND M20 WITH VENTILATION VALVE
Accessories supplied Order code Description
12659 ELECTRIFIED RAIL FIXING BRACKET 12664 CEILING FIXING BRACKET 12661 POST HEAD 2× 60-76 12662 POST HEAD 4× 60-76 12663 FLOODLIGHT SUSPENSION CABLE 12658 PROTECTIVE GRID
Accessories to be ordered separately Order code Description
L
B
H
350 438 434 121 8.8
Power * • Dimensions (mm) • Weight W L B H max kg
20102 BUILDING AUTOMATION CENTRAL UNIT 20124 BUILDING AUTOMATION CENTRAL UNIT WIFI 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE 15024 DALI MODULE 15034 1-10V MODULE
Building automation to be ordered separately Order code Description
15039 OPTICOM PHOTOSENSOR
Accessories supplied Order code Description
IK09 960°CUV-OIL
SMARTDRIVER 23000lumen
90
FH350 LEDFloodlight / Highbay
SUSPENDED MOUNTING
12663 to be ordered separately
WALL MOUNTINGGROUND MOUNTING
Wide symmetrical optics
12658 PROTECTIVE GRID
PROTECTIVE GRID GONIOMETRIC BRACKET
91
INTELLIGENT PHOTOSENSOR
MODULE
MODULE
DOMOTIC
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL ORDALI / 1-10V SYSTEMS AND EMERGENCY
Autodimmer Natural Light1.
Efficiency and dimming
The increase in luminous efficacy (lm/W) andthe useful life of the device may vary signifi-cantly according to the degree to which it isdimmed. Assuming an average level of 50%of the luminous flux, the following results areobtained with the FH350 LED:
Dimming 50 %Device duration +40 %Luminous efficiency +10 %
SPECIAL VARIANTS: COLOUR TEMPERATURE ON REQUEST, COLOUR RENDERING ≥90Contact the Beghelli sales network
FH350 LED SmartDriver LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description Optic W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
350 FH350SD PRO/RIF LED 350 SD 4K DIF/SYM 157 4 000 >80 175 384 27 800 23 000 131 A++ 1
FLOO
DLIG
HTPolar Diagram
INVERTER
19377 INVERTER PLUG&LIGHT LED SE/SA 1H 20-60V IP65 to be ordered separately
19368 INVERTER PLUG&LIGHT LED SE/SA 1H 20-60V IP65 to be ordered separately
19355* INVERTER LED AT/LG 6W 55V 123H to be ordered separately
19372* INVERTER LED AT/LG 8W 55V 123H to be ordered separately
19390* INVERTER EXT AT/LG 15W 55V 0,75-1-2-3-8H LTO to be ordered separately
19391* INVERTER EXT AT/LG 15W 55V 0,75-1-2-3-8H LiFe to be ordered separately
EMERGENCY WITH LED INVERTER ATTR LG LGFM
* IP65 cover (order code 19376) is needed for the installation LGFM Module 19375
IP66
GENERAL CHARACTERISTICS
Equivalent Power* 70, 150, 200 W
Power supply 93–265 VAC 50/60 Hz 176–250 VDC
Standard EN 60598-1, EN 60598-2-1,EN 60598-2-22 (fundamental
requirements), EN 62471 (Photobiological hazard)
Protection grade IP66 with ventilation valve, IK09
Working temp. -30 ÷ +50 °C (****)
Mounting on the ground, wall, spotlight towers, suspension, ceiling
Housing Polyester powder coated die-cast aluminium RAL 7040 grey
Optic Sheet metal with parabolic development in anti-iridescent, mirror finished, anodised aluminium. Symmetrical Asymmetrical
Diffuser Prismatic toughened glass 4 mm thick
Driver SELV electronic SD (cos j ≥ 0.97)with intelligent dimming
MTBF Control gear** 100 000 h Luminous flux 60 000 h (1× 200) (L80B20) maintenance** 70 000 h (1× 150) (L80B20) 80 000 h (1× 70) (L80B20)
Colour deviation 3 SDCM
* Equivalent power for comparison with metal halide fixtures** At environmental reference temperature of 25 °C**** At highest working temperature thermal protection may reduce the
output power.
– ANTI-VANDAL SCREWS – GONIOMETRIC BRACKET 418319000 CABLE GLAND M20 WITH VENTILATION VALVE
Accessories supplied Order code Description
12659 ELECTRIFIED RAIL FIXING BRACKET 12664 CEILING FIXING BRACKET 12661 POST HEAD 2× 60-76 12662 POST HEAD 4× 60-76 12663 FLOODLIGHT SUSPENSION CABLE 12657 PROTECTIVE GRID
Accessories to be ordered separately Order code Description
L
B
H
70, 150, 200 323 319 116 4
Power * • Dimensions (mm) • Weight W L B H max kg
20102 BUILDING AUTOMATION CENTRAL UNIT 20124 BUILDING AUTOMATION CENTRAL UNIT WIFI 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE 15024 DALI MODULE 15034 1-10V MODULE
Building automation to be ordered separately Order code Description
SMARTDRIVER
15039 OPTICOM PHOTOSENSOR
Accessories supplied Order code Description
IK09 960°CUV-OIL
13000lumen
FH70/150/200 LEDFloodlight / Highbay
92
FH70, FH150 e FH200 LED are fixtures of the latest generation ableto combine the advantages of the LED light source with state-of-theartoptic systems, as regards both performance and flexibility of applica-tion. The LED sources used, with very high efficiency, produceunprecedented lighting that allows the illumination of building façadesor hardstands, even at considerable distance. The diffuser has anample and uniform area of emission, allowing very low luminosity andtherefore reduced glare with high visual comfort. The excellentmechanical characteristics (IP66-IK09) allow installation in outdoorsettings even in extreme conditions, while the possibility of versionswith a symmetrical or asymmetrical beam makes the fixture particularlyversatile.The “square cut” design of the FH 70/150/200 LED allows movementsthrough 360°, on the axis of rotation of the goniometric bracket, thusenabling great flexibility of movement and mounting.Thanks to the “Autodimmer Sensor” accessory, the fixture works withintelligent dimming. To ensure maximum energy saving, self-adaptingtechnology is used on the sensor integrated in the fixture, toautomatically adjust the emission of light according to the reading ofthe natural light present on the work surface.A LED INVERTER is also available which transforms the fixture into anemergency maintained fixture, to light a section of the LED source inthe event of a black-out.Floodlight with a controlled beam to optimize the management of thelight emitted. Symmetrical and asymmetrical optics in a single fixture:the beam of light changes from asymmetrical to symmetrical by simplyremoving part of the optic.
SUSPENDED MOUNTING
12663 FLOODLIGHT SUSPENSION CABLE
WALL MOUNTINGGROUND MOUNTING GONIOMETRIC BRACKET
Floodlight with divisible modules
The optic system has been createdso as to obtain both a symmetricaland an asymmetrical beam. The lightsource can operate in symmetricalmode by removing part of the louvre.
VERSION WITH ASYMMETRICAL OPTIC
SPECIAL VARIANTS: COLOUR TEMPERATURE ON REQUEST Contact the Beghelli sales network
93
INTELLIGENT PHOTOSENSOR
Autodimmer Natural Light1.
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
Efficiency and dimming
The increase in luminous efficacy (lm/W) andthe useful life of the device may vary signifi-cantly according to the degree to which it isdimmed. Assuming an average level of 50%of the luminous flux, the following results areobtained with the FH70/150/200 LED:
Dimming 50 %Device duration +40 %Luminous efficiency +10 %
FH70/150/200 LED SmartDriver LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description Optic W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
70 FH70SD PRO/RIF LED 1x70 SD 4K SYM / ASYM 39 4 000 >80 45 108 7 000 6 300 140 A++ 1
150 FH150SD PRO/RIF LED 1x150 SD 4K SYM / ASYM 68 4 000 >80 74 (56***) 180 12 000 10 000 137 A++ 1
200 FH200SD PRO/RIF LED 1x200 SD 4K SYM / ASYM 86 4 000 >80 98 192 16 350 13 000 132 A++ 1
FLOO
DLIG
HT
MODULEMODULE
DOMOTIC
Asymmetrical optic Symmetrical optic
Polar Diagram Polar Diagram
INVERTER
19377 INVERTER PLUG&LIGHT LED SE/SA 1H 20-60V IP65 to be ordered separately
19368 INVERTER PLUG&LIGHT LED SE/SA 1H 20-60V IP65 to be ordered separately
19355* INVERTER LED AT/LG 6W 55V 123H to be ordered separately
19372* INVERTER LED AT/LG 8W 55V 123H to be ordered separately
19390* INVERTER EXT AT/LG 15W 55V 0,75-1-2-3-8H LTO to be ordered separately
19391* INVERTER EXT AT/LG 15W 55V 0,75-1-2-3-8H LiFe to be ordered separately
EMERGENCY WITH LED INVERTER ATTR LG LGFM
* IP65 cover (order code 19376) is needed for the installation LGFM Module 19375
IP66
GENERAL CHARACTERISTICS
Equivalent Power* 30, 50, 70 W
Power supply 230 VAC ±10 % 50 Hz
Standard EN 60598-1, EN 60598-2-1,EN 60598-2-22 (fundamental
requirements), EN 62471 (Photobiological hazard)
Protection grade IP66
Working temp. -20 ÷ +40 °C
Mounting on ground, wall
Housing Die-cast aluminium RAL 7040 grey
Louvre Sheet metal with parabolic development in anti-iridescent, mirror finished, anodised aluminium. Symmetrical Asymmetrical
Diffuser Prismatic toughened glass 4 mm thick
Driver SELV electronic ED (cos j ≥ 0.90)
MTBF control gear** 65 000 h Luminous flux >50 000 h (F70) (L80B20) maintenance** >60 000 h (F30-F50) (L80B20)
Colour deviation 3 SDCM
* Equivalent power for comparison with metal halide fixtures** At environmental reference temperature of 25 °C
The F30/50/70 LED is a fixture of the latest generation able to combinethe advantages of the LED light source with state-of-the-art optic sys-tems, as regards both performance and flexibility of application. TheLED sources used, with very high efficiency, produce unprecedentedlighting that allows the illumination of building façades or hardstands,even at considerable distance. The diffuser has an ample and uniformarea of emission, allowing very low luminosity and therefore reducedglare with high visual comfort. The excellent mechanical characteristics(IP66-IK09) allow installation in outdoor environments even in extremeconditions.A LED INVERTER is also available which transforms the fixture into anemergency maintained fixture, to light a section of the LED source inthe event of a black-out.Floodlight with a controlled beam to optimize the management of thelight emitted. Symmetrical and asymmetrical optics in a single fixture:the beam of light changes from asymmetrical to symmetrical by simplyremoving part of the optic.BUILDING AUTOMATION RADIO RECEIVER INTERFACEaccessory available for remote switching on/off via radio.
20108 1 OUTPUT interface – radio receiver
Accessories to be ordered separately Order code Description
L
B
H
30 190 173 75.5 1.2 50 190 173 75.5 1.2 70 190 173 75.5 1.2
Power * • Dimensions (mm) • Weight W L B H max kg
IK09 960°CUV-OIL
4000lumen
94
F30/50/70 LEDFloodlight
SPECIAL VARIANTS: COLOUR TEMPERATURE ON REQUEST, COLOUR RENDERING ≥90Contact the Beghelli sales network
– ANTI-VANDAL SCREWS – GONIOMETRIC BRACKET 418319000 CABLE GLAND M20 WITH VENTILATION VALVE
Accessories supplied Order code Description
WALL MOUNTINGGROUND MOUNTING
Floodlight with divisible modules
The optic system has been created so asto obtain both a symmetrical and anasymmetrical beam. The light source canoperate in symmetrical mode by removingpart of the louvre.
VERSION WITH ASYMMETRICAL OPTIC
– supplied
GONIOMETRIC BRACKET
Asymmetrical optic Symmetrical optic
95
F30/50/70 LED EcoDriver LED Power Colour Colour Power consumption Flux of LEDs Flux of Energy Power* W Order code Description Optic W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
30 F30LED PRO LED 1x30W 4K SYM / ASYM 15 4 000 >80 17 33 2 100 1 800 110 A++ 1/8
50 F50LED PRO LED 1x50W 4K SYM / ASYM 23 4 000 >80 26 66 3 500 3 000 110 A++ 1/8
70 F70LED PRO LED 1x70W 4K SYM / ASYM 33 4 000 >80 37 99 4 600 4 000 110 A++ 1/8
FLOO
DLIG
HT
Polar Diagram Polar Diagram
INVERTER
19377 INVERTER PLUG&LIGHT LED SE/SA 1H 20-60V IP65 to be ordered separately
19368 INVERTER PLUG&LIGHT LED SE/SA 1H 20-60V IP65 to be ordered separately
19355* INVERTER LED AT/LG 6W 55V 123H to be ordered separately
19372* INVERTER LED AT/LG 8W 55V 123H to be ordered separately
19390* INVERTER EXT AT/LG 15W 55V 0,75-1-2-3-8H LTO to be ordered separately
19391* INVERTER EXT AT/LG 15W 55V 0,75-1-2-3-8H LiFe to be ordered separately
EMERGENCY WITH LED INVERTER ATTR LG LGFM
* IP65 cover (order code 19376) is needed for the installation LGFM Module 19375
L
B
H
70 611 320 88 5.5 100 611 320 88 5.5 150 611 320 88 5.7 250 611 320 88 5.7
Power* • Dimensions (mm) • Weight W L B H max kg
IK09 960°CUV-OILIP66
SPECIAL VARIANTS: COLOUR TEMPERATURE ON REQUEST Contact the Beghelli sales network
20102 BUILDING AUTOMATION CENTRAL UNIT 20104 2 INPUT INTERFACE – RADIO TRANSMITTER 15022 BUILDING AUTOMATION RADIO MODULE 15024 DALI MODULE 15034 1-10V MODULE
Building automation to be ordered separately Order code Description
418319000 M20 CABLE GLAND WITH VENTILATION VALVE
Accessories supplied Order code Description
SMARTDRIVER
96
The Strada LED combines architectural lighting requirements with theSmart necessities of the new smart cities. The range includes fixturesof the latest generation able to combine the advantages of the lowluminosity LED source with state-of-the-art optic systems, as regardsboth performance and flexibility of application. The optic system usedhas a geometry studied to obtain low luminosity and therefore reducedglare and high visual comfort.The excellent mechanical characteristics (IP66-IK09) offered by theinnovative housing in die-cast aluminium and toughened glass ensurelong live in outdoor environments even in extreme conditions. TheSmartDriver, installed on the whole S series, allows integration with thevarious Smart modules in the system, making it possible to use theStreet Lamp in a SmartCities setting.
Strada LEDStreet lamp
GENERAL CHARACTERISTICS
Equivalent Power* 70, 100, 150, 250 W
Power supply 93–265 VAC 50/60 Hz 176–250 VDC
Standard EN 60598-1, EN 60598-2-3,EN 60598-2-22, EN 62471 ( Photobio-logical hazard), EN 55015, EN 61547,EN 61003-2, EN 61003-2
Impulse Overvoltage 10 kV (SPD included) Protection
Protection grade IP66 with ventilation valve, IK09
Working temp. -30 ÷ +40 °C
Tilt 0–20°
Mounting Pole head or arm Ø 60–76 mm
Housing Polyester powder coated die-cast aluminium RAL 7040
Louvre Sheet metal with parabolic development in anti-iridescent, mirror finished, anodised aluminium. Urban roads and extraurban roads (ME2,ME3A, ME3B, ME4A, ME4B, ME5, ME6), footpaths and cycle tracks (CE, S)
Diffuser Toughened glass 5mm thick
Driver Electronic SD (cos j ≥ 0.95) with intelligent dimming
MTBF Control gear** 80 000 h Luminous flux >70 000 h (S70, S100, S150) (L80B20) maintenance** >70 000 h (S30, S50) (L80B20)
Colour deviation 3 SDCM * Equivalent power for comparison with metal halide fixtures** At environmental reference temperature of 25 °C
MODULE
DOMOTIC
OPTIONAL MODULES TO EXTEND BEGHELLI SD TO RADIO CONTROL OR DALI / 1-10V SYSTEMS AND EMERGENCY
ARM MOUNTING Ø 60POST HEAD MOUNTING Ø 60
P Specific fixture for outdoor Parking Areas (to determine Area Dimensions contact Beghelli Sales Network)*** The power consumption has an auto derating to the power indicated in parenthesys if the product is powered by voltage less than 110 VAC.2 Versions 150 and 200 are equipped with dual drivers which require two domotic radio modules to control the device. The two LED sources are managed independently from each other.
Urban optic Cycle/pedestrian city/parking opticLong beam city/non-city optic
DOUBLE POWER SUPPLYFAST WIRING CONNECTOR
Polar DiagramPolar DiagramPolar Diagram
97
Efficiency and dimming
The increase in luminous efficacy (lm/W) andthe useful life of the device may vary signifi-cantly according to the degree to which it isdimmed. Assuming an average level of 50%of the luminous flux, the following results areobtained with the Strada LED:
Dimming 50 %Device duration +40 %Luminous efficiency +10 %
Strada LED SmartDriver LED Power Colour Colour Power consumption Flux of LEDs Flux of EnergyPower* W Order code Description Optic W Temp. K rendering max W N°LEDs lm (Tj=25°C) fixture lm lm/W Class Packaging
1× 50 S50EXSD STRA LED EX 1x50 SD 4K Extrurban Street 32 4 000 >70 34 24 4 800 4 000 115 A++ 1/1
1× 70 S70EXSD STRA LED EX 1x70 SD 4K Extrurban Street 47 4 000 >70 51 24 6 700 5 600 110 A++ 1/1
1× 100 S100EXSD STRA LED EX 1x100 SD 4K Extrurban Street 66 4 000 >70 72(56***) 48 10 000 8 000 112 A++ 1/1
1× 150 S150EXSD STRA LED EX 1x150 SD 4K Extrurban Street 94 4 000 >70 103 48 13 500 11 500 105 A++ 1/1
1× 250 S250EXSD STRA LED EX 1x250 SD 4K Extrurban Street 120 4 000 >70 130(113***) 48 17 000 14 000 110 A++ 1/1
1× 50 S50EXLSD STRA LED EX LONG 1x50 SD 4K Extrurban Wide Street 32 4 000 >70 34 24 4 800 4 000 115 A++ 1/1
1× 70 S70EXLSD STRA LED EX LONG 1x70 SD 4K Extrurban Wide Street 47 4 000 >70 51 24 6 700 5 600 110 A++ 1/1
1× 100 S100EXLSD STRA LED EX LONG 1x100 SD 4K Extrurban Wide Street 66 4 000 >70 72(56***) 48 10 000 8 000 112 A++ 1/1
1× 150 S150EXLSD STRA LED EX LONG 1x150 SD 4K Extrurban Wide Street 94 4 000 >70 103 48 13 500 11 500 105 A++ 1/1
1× 250 S250EXLSD STRA LED EX LONG 1x250 SD 4K Extrurban Wide Street 120 4 000 >70 130(113***) 48 17 000 14 000 109 A++ 1/1
1× 30 S30UCSD STRA LED UC 1x30 SD 4K Urb. Cycle-ped. Street / Park 22 4 000 >70 24 16 3 400 2 900 120 A++ 1/1
1× 50 S50UCSD STRA LED UC 1x50 SD 4K Urb. Cycle-ped. Street / Park 31 4 000 >70 34 16 4 500 3 900 115 A++ 1/1
1× 70 S70UCSD STRA LED UC 1x70 SD 4K Urb. Cycle-ped. Street / Park 44 4 000 >70 48 32 6 700 5 300 110 A++ 1/1
1× 100 S100UCSD STRA LED UC 1x100 SD 4K Urb. Cycle-ped. Street / Park 60 4 000 >70 66(56***) 32 9 400 7 200 109 A++ 1/1
2
2
2
2
P
STRE
ET
98
Controls SystemsControl units, devices and software
99
BUIL
DING
AUT
OMAT
ION
Building automation control UnitEnables domotic control of all SD devices with radiomodule: scenarios can be programmed according tospecific timings within the astronomical calendar year,both locally via WiFi or remotely using a PC, via theSoftware SD Manager, included
Building automation radiotransmitter interfaceRadio module for activating scenarios on SD devicesequipped with radio modules. Switching ED devicesequipped with domotic radio receiver interface on andoff
Building automation radioreceiver interfaceReceiver module for switching ED devices on and offvia radio, using the domotic radio transmitter interfaceor control unit
Building automation radio moduleWhen inserted into the SmartDriver, it activates theradio connection with the control unit or domotic radioreceiver interface. Control and programming via PCwith SD Manager
DALI ModuleModule for communicating with the DALI communi -cation protocol
1/10V ModuleModule for interfacing for direct command analoguedimming
OPTICOM PHOTOSENSORThe intelligent eye of the SD system. Enables theAutodimmer with natural light compensation (NaturalLight) and Autodimmer with movement detector(Dynamic Light). Opticom also receives commandsfrom the flash on a smartphone.
SD MANAGER softwareSoftware used to monitor and manage lighting andemergency lighting. It works with central unit codes20102 and 20124.
GENERAL CHARACTERISTICS
Protection grade IP20
Working temp. -20 ÷ +40 °C
Mounting on 9 module DIN bar
Fixtures managed Beghelli recommended limit:400 devices
Local transmission Spread Spectrum radio system SFH DSSS in 16 channels
Remote transmission GSM, can be connected to a Beghelli Services databases, Interfaceable with BMS (Building Management Systems)
by RS-485 interface, MODBUS protocol
Functions Complete control of operation of the lighting system, in particular: - Switching up to 256 groups on and
off - setting the dimmer level - Defining the operating mode (fixed
luminosity at the set value orautomatic adjustment of luminosity)
- Diagnostics - Measurement of the energy
consumed and saved - Creation of lighting scenarios - Timed switching on/off of groups of
lamps - Configuration of the lighting system - Management of all the functions of the
emergency system - Synchronization and timing of the test
functions - Inhibition/enabling of the emergency - Detailed management of errors - Alternate tests on 50% of the system
IP20
160 75 90 IP20 0.6
• Dimensions (mm) • Protection grade Weight L B H kg
H
BL
20102 BUILDING AUTOMATION CENTRAL UNIT USB 1 20124 BUILDING AUTOMATION CENTRAL UNIT + WIFI 1
Building automation control unit Order code Description Packaging
20109 SD MANAGER SOFTWARE – CABLE RS485/USB (WITH CODE 20102) – CONVERTER RS485/WIFI – ETHERNET (WITH CODE 20124)
Building automation supplied Order code Description
GPRS
SMARTDRIVER
Building automation controlunit
Control unit for light fixtures and emergency lighting with radio controlequipped with the Beghelli Spread Spectrum transceiver integrated inthe Electronic Driver with intelligent dimming.The control unit sends the light fixtures the necessary commands toregulate their operation and receives information from the fixtures ontheir status, diagnostics and energy consumption data.The control unit is able to control each different light fixture in the sys-tem individually.The control unit coordinates operation of the network of communica-tion that allows the control of the light fixtures even in large buildings,by the automatic routing of information packages through the networkconsisting of the lighting and emergency fixtures.The control unit also includes a GSM communicator that allows remotecontrol of the system.
Lighting and Emergency lighting integrationand automation
100
IP20
20104 2 INPUT INTERFACE – RADIO TRANSMITTER 1
Order code Description Packaging
IP20
20108 1 OUTPUT INTERFACE – RADIO RECEIVER 1
Order code Description Packaging
Building automation radiotransmitter interface
101
Building automation lighting
The transmitter is a radio interface device, supplied at 230 VAC, withtwo inputs at 230 V able to send radio commands to the light fixturesor to appropriate receivers with relay actuators.The device, with approximate dimensions 30 × 64 × 20 mm, has 4 screwterminals, two for the power supply (N and P) and two inputs (I) whichreads the voltage present shared with the neutral terminal (N).The device has a built-in antenna and can be fitted in any type of un-shielded container; if used in a 503 box it occupies the internal spaceof a single socket.The functions that can be associated with the transmitter are thefollowing:- Transmission of a timed command (button or movement sensor);- Status transmission (switch on/off)The commands sent by the transmitter are associated with a singlelight fixture or with groups of fixtures.Working temp. -20 °C ÷ +50 °C
Building automation radioreceiver interfaceBuilding automation lighting
The Receiver is a radio interface device, supplied at 230 VAC, whichintegrates a relay able to control light fixtures and other electric loads.With approximate dimensions 30 × 64 × 20 mm, has 4 screw termi-nals, two for the power supply (N and P) and two for the 230 V output(N and Pout).The antenna is built-in and can be fitted in any type of unshielded con-tainer; if used in a 503 box it occupies the internal space of a singlesocket.The relay is able to switch a maximum load of 260 W.The receiver also has a built-in power meter and a counter for theelectric energy distributed at the output.The device is associated with one or more radio transmitters andactivates the corresponding commands.Working temp. -20 °C ÷ +50 °C
BUIL
DING
AUT
OMAT
ION
15024 DALI MODULE 1 15034 1-10V MODULE 1
Order code Description Packaging
IP20
15022 BUILDING AUTOMATION RADIO MODULE 1
Order code Description Packaging
SMARTDRIVER
SMARTDRIVER
Building automationradio module
Spread Spectrum radio transceiver operating in the band 2.400–2.483GHz according to Beghelli FH-DSSS protocol. The device enables theLED Control gear (SmartDriver) of the light fixture in which it is insertedfor remote control and wireless control. The building automation radiomodule is fed by the SmartDriver and allows the following functions:- Receiving and actuating radio commands- Possibility of performing automatic functions of regulating luminosity
by radio messages- Calculation of the energy consumed by the light fixture, and for this
it is enabled in the “Grande ESCo Italia” project- Tele-diagnostics of the light fixtureWorking temp. -20 °C ÷ +50 °C
Building automation lighting
DALI/1-10V module
The device enables the LED Control gear (SmartDriver) to control thelight fixture by the DALI interface or 1-10V analogue interface.Working temp. -20 °C ÷ +50 °C
Building automation lighting
IP20
102
15039 OPTICOM PHOTOSENSOR 1 15040 OPTICOM PHOTOSENSOR ACCIAIO 1
Order code Description Packaging
IP20SMARTDRIVER
Intelligent OpticomPhotosensor
Sensor consisting of a SMD phototransistor that can be connected tothe SmartDriver electronic Driver, to which it communicates theinstantaneous reading of the contribution of natural light to the envi-ronmental lighting. This information allows the SmartDriver to calibratethe LED supply power correctly in order to keep the lighting constantand uniform on the work surfaces.The Autodimmer sensor allows an average consumption saving of 30%for the fixtures on which it is installed.Each SD device equipped with the new OPTICOM INTELLIGENTPHOTOSENSOR Technology acquires innovative Autodimmer DynamicLight and Opticom Technology functions, in addition to AutodimmerNatural Light functions.Working temp. -20 °C ÷ +50 °C
Building automation lighting
20109 SD MANAGER SOFTWARE 1
Order code Description Packaging
SD MANAGER software
SD manager is a software designed to work with autmation centralunit code 20102.SD manager is able to control lighting and monitor emergencylighting.It’s possible to place luminares on a DWG map.Software is used to setup a new installation, to create groups, tocontrol lighting, to schedule test and check results and moreover.
103
BUIL
DING
AUT
OMAT
ION
104
General CharaCterIStICS
Output power 3.2W constant
Power supply 230 VAC 50 Hz
Operation Maintained/Not Maintained (SA/SE) RM with optional control device (cod. 2730)
Standard EN 61347-2-7, EN 61347-1,EN 60598-1
Protection grade IP40, IP65
Autonomy 1 h, 3 h
DC Output 20–60 VDC (19358, 19359) SELV60–180 VDC (19367)
Working temp. 0 ÷ +40 °C
Battery NiCd 7.2 V 0.75Ah (1 h) NiMH 7.2 V 1.5 Ah (3 h)
Status LED Bi-color with PC pilot light (BCS)
Housing Polycarbonate
Max Output Current 160 mA
Recharging time 24 h • Dimensions (mm) • Weight IP L B H max kg
40 239 46 30 0.3
• Dimensions (mm) • Weight IP L B H max kg
65 301 139 55 0.8
model IP40
model IP65
H
B
L
LINE SE
LED Lamp
LED signal
diffuser with SD Driver
– CABLE COVERS
Accessories supplied Order code Description
IP65IP40
L
H
B
Inverter based on Plug&Light patented technology, equipped with arapid connector that is compatible with SD (Smart Driver) that comesas standard in all the devices in the Stella Polare LED range. Theinverter incorporates the battery pack and features a cable cover foruse removed from the device, such as in the case of Led Panel orDown light LED, where it is housed in the suspended ceiling.The system includes the Battery Control System (BCS) with multicolorLED signaling system to show battery status, and is compatiblewith all LED devices equipped with SELV certified drivers to which itcan be quickly connected using the fast universal terminal board.The Plug&Light system guarantees the highest level of performance(for example when installed on BS 100 LED it provides emergencypower of 452 Im), constant output power and complete maintenance ofthe conformity features of the Smart Driver device that it is connected to.Inverter is able to work with every kind of LED sourge and driver in the2 DC ranges 20-60V and 60-180V.
Inverter LED Plug&LightFast connection inverter
12 HOURSRECHARGE
105
3.2 3 3.2 3
19358 INV PLUG&LIGHT LED SE/SA 1H 20-60V SE/SA 1 h NiCd 7.2 V 0.75 Ah 1 20–60 V 1/12 19359 INV PLUG&LIGHT LED SE/SA 3H 20-60V SE/SA 3 h NiMH 7.2 V 1.5 Ah 1 20–60 V 1/12 19367 INV PLUG&LIGHT LED SE/SA 1H 60-180V SE/SA 1 h NiCd 7.2 V 0.75 Ah 1 60–180 V 1/12 19371 INV PLUG&LIGHT LED SE/SA 3H 60-180V SE/SA 3 h NiMH 7.2 V 1.5 Ah 1 60–180 V 1/12
TR BATTERY CONTROL SYSTEM IP40 Absorption DC Pack Order code Description Model Autonomy Battery max W Output single W*
3 3.2 3
19368 INV PLUG&LIGHT LED SE/SA 1H 20-60V IP65 SE/SA 3 h NiMH 7.2V 1.5Ah 1 1/12 19377 INV PLUG&LIGHT LED SE/SA 1H 20-60V IP65 SE/SA 1 h NiCd 7.2V 0.75Ah 1 20–60 V 1/12 19373 INV PLUG&LIGHT LED SE/SA 3H 60-180V IP65 SE/SA 3 h NiMH 7.2V 1.5Ah 1 60–180 V 1/12
TR BATTERY CONTROL SYSTEM IP65 Absorption Pack Order code Description Model Autonomy Battery max W single W*
Autonomy 1 hourFlux 452 lm
EXAMPLE OF CALCULATION OF THE EMERGENCY LUMINOUS FLUX FOR BS 100 LED (SMART DRIVER) WITH PLUG&LIGHT INVERTER WITH 1 HOUR OF AUTONOMY (CODE 19358)
The Plug&Light inverter enables optimum lighting performance to beobtained from the device on which it is installed. Below is themethod of calculation used to calculate the nominal flux that can beobtained in an emergency (example provided)
FnFout = _________ × PoutPn × 0.9
Fout = Flux output in emergency mode (lm)Fn = Nominal flux product (lm)Pn = Nominal power absorbed by the product (W)0.9 = Coefficient of efficiency of the Inverter (EU 874/2012)Pout = Nominal Power Inverter (W)
Example:7 500Fout = _________ × 3.2 = 452 lm
59 × 0.9Fn = 7 500 lm FnPn = 59 W
BATTERY CONTROL SYSTEMThe warning LED follows new protocols linked to compliance with Standard CEI
EN 60598-2-22, which expressly requires the signalling of a battery malfunction
which is indicated instantaneously with the appearance of the colour red on the
multicolour warning led (Battery Control System BCS).
Immediate connection with SmartDriver
Red warning LED:BATTERY
MALFUNCTION
Green warning LED:FIXTURE
FULLY EFFICIENT
* Indicative power for comparison with fluorescent tube fixtures** Minimun flux guaranteed according to EN 60598-2-22
EMER
GENC
Y IN
VERT
ERS
106
General CharaCterIStICS
Max output 6 W power
Power supply 230 VAC 50 Hz
Operation SA (Mantained), RM (rest mode with code 2730)
Standard EN 61347-2-7, EN 61347-2-13,EN 61347-1, EN 62034
Protection grade IP20 (according to the fixture in which it is mounted), IP65
Autonomy 1 h, 3 h
Output voltage 6V – 55V
Peak output 500 mAcurrent
Recharging Time 24 h
Working temp. 0 ÷ +50 °C (Battery)-20 ÷ +50 °C (Inverter)
Enclosure 70 °Ctemperature limit
Recharging current 85 mA
Battery NiMh 7.2 V 1.7 Ah (high temperature)
Rest Mode with optional control device(Cod. 12101)
Status LED Bi-color
Auto testart Compatible with test button in the AT configuration
Housing Polycarbonate
40 232 30 26 132 17.5 35 0.3
IP Inverter dimensions (mm) Battery dimensions (mm) Weight L B H L Ø H max kg
H
BL
ØL
IP65IP20
65 301 139 55 0.8
IP Inverter dimensions (mm) Battery dimensions (mm) Weight L B H L Ø H max kg
L
H
B
model IP40
model IP65
Electronic control gear for emergency lighting to light the LED modules.Autonomy independent of the lamp and selectable, 1 hour, 2 hoursand 3 hours.The control of the output current with PWM modulation at a constantpeak current allows the best control of the LED module, avoidingeffects of distortion of the light flux and of the LED colour temperature.Maximum versatility for a LED conversion kit. Self-adapting outputvoltage with automatic load recognition. Output power independent ofthe connected LED module.The recharging system guarantees 1 h of autonomy after 12 h ofrecharging in the 2 h and 3 h configurations.The disconnection by relay of the power supply arriving from the driverand of the LED circuit make the Beghelli LED conversion kit a universalproduct, compatible with all drivers.If not reached by the BUS, the LG version automatically performs self-diagnosis (AutoTest).
Inverter LED
12 HOURSRECHARGE
107
AT-LGFM Logica FM
AT-LGFM Logica FM IP65
AT-LG Logica IP65
AT-LG Logica
The LED inverter enables optimum lighting performance to beobtained from the device on which it is installed. Below is themethod of calculation used to calculate the nominal flux that can beobtained in an emergency (example provided)
FnFlux = P inverter × _____ where:Pn
P = Inverter nominal power (in the 1 h model = 6 W)Fn = Device nominal flux (for BS100 LED = 7 500 lm)Pn = LED nominal power (for BS100 LED = 59 W)
7 500Flux = 6 × ________ = 847 lm59 × 0.9
EXAMPLE OF CALCULATION OF THE EMERGENCY LUMINOUS FLUX FOR 100 LED (SMART DRIVER) WITH LED INVERTER WITH 1 HOUR OF AUTONOMY (CODE 19355)
Autonomy 1 hourFlux 847 Im
AbsorptionOrder code Description Control Model Autonomy Battery W Pack
19355 INVERTER FULL LED AT/LG 6W 55V 123h AT/LG SA 1-2-3H NiMh 7.2 V 1.7 Ah 2 119372 INVERTER LED AT/LG 8W 55V 123h AT/LG SA 1-2-3H NiMh 7.2 V 2.2 Ah 2 1
Power* W
2÷6 8
AbsorptionOrder code Description Control Model Autonomy Battery W Pack
19364 INVERTER FULL LED AT/LG 6W 55V 123h IP65 AT/LG SA 1-2-3H NiMh 7.2 V 1.7 Ah 2 1
Power* W
2÷6
AbsorptionOrder code Description Control Model Autonomy Battery W Pack
19356 INVERTER FULL LED LGFM 6W 55V 123h LGFM SA 1-2-3H NiMh 7.2 V 1.7 Ah 2 1
Power* W
2÷6
AbsorptionOrder code Description Control Model Autonomy Battery W Pack
19365 INVERTER FULL LED LGFM 6W 55V 123h IP65 LGFM SA 1-2-3H NiMh 7.2 V 1.7 Ah 2 1
Power* W
2÷6
* Indicative power for comparison with fluorescent tube fixtures ** Minimun flux guaranteed according to EN 60598-2-22
LINE SE
LGBUS
LOGICA
Cod.12101optional
AT
LED MODULE
AUTONOMY
LINE SA
C
EMER
GENC
Y IN
VERT
ERS
General CharaCterIStICS
Max output 15 W* power
Power supply 230 VAC 50 Hz
Operation SA (Mantained),RM (rest mode with code 12101)
Standard EN 61347-2-7, EN 61347-2-13,EN 61347-1, EN 62034
Protection grade IP20 (according to the fixture in which itis mounted), IP65
Autonomy 45 min., 1 h, 2 h, 3 h, 8 h
Output voltage 3V – 55V
Peak output current 500 mA
Recharging Time 24 h
Working temp. -20 °C ÷ + 50 °C (LTO Battery)-10 °C ÷ + 60 °C (LiFe Battery)-20 °C ÷ + 70 °C (Inverter)
Recharging current 105 mA
Status Led Bi-color
Auto test Compatible with test button in the ATconfiguration
Housing Polycarbonate
Electronic control gear for emergency lighting to light LED modules.The emergency duration does not depend from the load and it isselectable in 1 h, 2h, 3h or 8h.The control of the output current with PWM modulation at a constantpeak current allows the best control of the LED module, avoidingeffects of distortion of the light flux and of the LED colour temperature.Maximum versatility for a LED conversion kit. Self-adapting output volt-age with automatic load recognition. Output power indipendent of theconnected LED module. The disconnection by relay of the power sup-ply arriving from the driver and of the LED circuit make the Beghelli LEDconversion kit a universal product, compatible with all drivers.If not reach by the communication bus, the LG version automaticallyperforms self-diagnosis (Autotest).Available in two different versions; with LTO batteries (suggested forenvironments where temperature reaches a range -20÷+50°C, with10 warranty years) and with LiFe batteries (suggested for environmentswhere temperature reaches a range -10 ÷ +60°C, with 5 warrantyyears).An additional battery can be supplied when there is the need to doublethe autonomy at a certain load.
Inverter LED Extreme
LTO 232 30 26 198 37 19 0.3 LiFe 232 30 26 132 37 19 0.3
Battery Inverter dimensions (mm) Battery dimensions (mm) Weight L B H L Ø H max kg
H
BL
ØL
65 301 139 55 0.8
IP Dimensions Inverter (mm) Weight L B H max kg
L
H
B
model IP20
model IP65
IP65IP20
19375 MODULE LGFM INVERTER LED
19376 COVER IP65
415439001 SUPPLEMENTARY BATTERY LTO 14.4 V 1.2 Ah
415440001 SUPPLEMENTARY BATTERY LiFe 12.8 V 1.5 Ah
Accessories to be ordered separately Order code Description
108
W
15*
15*
The LED inverter enables optimum lighting performance to be obta-ined from the device on which it is installed. Below is the method ofcalculation used to calculate the nominal flux that can be obtained inan emergency (example provided)
FnFlux = P inverter × _____ where:Pn
P = Inverter nominal power (in the 1h model = 6 W)Fn = Device nominal flux (for BS100 LED = 7 500 lm)Pn = LED nominal power (for BS100 LED = 59 W)
Emergency Flux = 1 271 lm
With Autoripara Battery:P = Inverter nominal power (in the 1,5h model = 15 W)Fn = Device nominal flux (for BS100 LED = 7 500 lm)Pn = LED nominal power (for BS100 LED = 59 W)
Emergency Flux = 1 906 lm
The output power is subjected to the maximum current of 500mA(i.e. the inverter set at 1h autonomy provides an output of 10W onlyif connected to a LED with Vled > 20 Volt). Below this voltage, thepower reduces as per this graph.
EXAMPLE OF CALCULATION OF THE EMERGENCY LUMINOUS FLUX FOR 100 LED (SMART DRIVER) WITH LED INVERTER WITH 1 HOUR OF AUTONOMY (CODE 19355)
Autonomy 1 hour Flux 1906 Im
Voltage LED V
0 10 20 30 40 50 60
2
0
4
6
8
10
12
14
16Po
wer
Out
put W
45min. / 1.5h (with Autoripara Battery)
1h / 2h (with Autoripara Battery)
2h / 4h (with Autoripara Battery)
3h / 6h (with Autoripara Battery)
8h / 16h (with Autoripara Battery)
Titanium BatteryQUICK CHARGING: the autonomy ofthe device on which it is installedcan reach up to 80% in less than2 hours
Withstands extreme operatingtemperatures:-20 °C ÷ +50 °C
LONG LIFE with at least 7,000charge cycles guaranteed, devicescan boast 10 years of useful life
MAXIMUM SAFETY: unlike normalLithium batteries, the material usedon these accumulators rendersthem particularly safe, even whena short circuit or perforation occurs
1
2
3
4
Autoripara BatterySAFETY: the AUTORIPARA system intervenes if the main battery fails.
LUMINOUS FLUX: operators can choose to set both batteries to operatesimultaneously, doubling the luminous flux.
AUTONOMY: operators can choose to set both batteries to operatesimultaneously, doubling the autonomy of the device.
1
2
3
AT-LG Logica
Autonomy with AbsorptionOrder code Description Control Model Autonomy Autoripara Battery Battery max W Pack
19390 INVERTER EXT AT/LG 10W 55V 0.75-123-8h LTO AT/LG SA 0.75-1-2-3-8H 1.5-2-4-6-16H LTO 14.4V 1.2Ah 2 119391 INVERTER EXT AT/LG 10W 55V 0.75-123-8h LiFe AT/LG SA 0.75-1-2-3-8H 1.5-2-4-6-16H LiFe 12.8V 1.5Ah 2 1
* 15W power can be obtained by setting autonomy at the minimum value: 0.75h or 1.5h with Autoripara Battery
109
NOU
ZOVÉ
INVE
RTER
Y
110
GENERAL CHARACTERISTICS
Power 2 W
Power supply 230 VAC ± 10 % 50 Hz
Operation HT, Maintained (SA)/Not Maintained (SE)/Public performance (PS) selectable with DIP switch in the versions LG and LGFM
Standard EN 60598-1, EN 61347-2-2,EN 60598-2-22, EN 1838, EN 50172
Protection grade according to the fixture in which it is mounted
Autonomy 1 h, 2 h, 3 h selectable with DIP switchin the LG and LGFM versions
Working temp. 0 ÷ +40 °C
Mounting on fixtures with T5 and T8 pipes
Housing Aluminium and white Polycarbonate RAL 9010
Optics lenses in highly transparent PMMA
Light source LED
12 HOURSRECHARGE
leD module with lens 2 35 35 33 Inverter – 114 32 22 Battery – 40 70 80 50 4.5* Indicative power for comparison with fluorescent tube fixtures
Power • Dimensions (mm) • W L L1 L2 B H
L
B
H
H
BL
B
L1L2 L L
H
– 3 lenses: LUNGA, LARGA, ALTA with 3 different covers – 2 SPRINGS FOR FIXING ON T8 AND T5 PIPES
Accessories supplied Order code Description
leD module
Battery
Inverter
UVIP20 HHOSPITAL
A high-performance auxiliary fixture for emergency lighting. Operationis subject to the installation of a traditional lighting fixture where the LEDmodule and relative inverter with battery set are installed. the kit has3 special high-transparency PMMa lenses, for the lungaluce altaluceand largaluce versions, to obtain different dimensions of illuminatedsurface areas, and allow for an installation height from 3 to 7 metres.each lens has a ral 9010 white Polycarbonate cover. the LED modulehas an elastic clip fastening system for T8 and T5 tubes. the high-efficiency leD has a die-cast aluminium heat sink.
LED emergency moduleWith recessed Inverter
111
2
LENS Lamps Cover
LUNGALUCE 3 m 1 It covers an escape route of 17.1 m with 1 lux in the middle and >0.5 lux within 1 m of the middle
2 Centre distance 18 m between the lamps covering an escape route of 35.1 m with1 lux in the middle and >0.5 lux within 1 m of the middle
LARGA LUCE 3 m 1 Covers a surface of 11.3 m x 11.3m with at least 0.5lux with the exception of a 0.5 m perimeter
4 Centre distance 13.2 m covering a surface of 24.5m x 24.5 m with at least 0.5lux with the exception of a 0.5 m perimeter
ALTALUCE 7 m 1 Covers a surface of 12.4 m x 12.4 m with at least 0.5 lux with the exception of a 0.5 m perimeter
4 Centre distance 14.4m covering a surface of 26.8 m x 26.8 m with at least 0.5 lux with the exception of a 0.5 m perimeter
19342 MODULE EM LED LG SE/SA/PS 1/2/3H SE/SA/PS 1/2/3h NiMH 7.2V 1.2Ah 1 250/190/165 165 1/6.5 0.2 6
Order code Description Model Autonomy Battery N° LED Flux of** SE lm Flux of** SA lm Absorption W Weight kg Pack W
LG Logica
2
19341 MODULE EM LED AT SE 1N SE 1h NiCd 7.2V 0.75Ah 1 250 – 1 0.2 6
Order code Description Model Autonomy Battery N° LED Flux of** SE lm Flux of** SA lm Absorption W Weight kg Pack W
AT Autotest
2
19343 MODULE EM LED LGFM SE/SA/PS 1/2/3H SE/SA/PS 1/2/3h NiMH 7.2V 1.2Ah 1 250/190/165 165 2/7.5 0.2 6
Order code Description Model Autonomy Battery N° LED Flux of** SE lm Flux of** SA lm Absorption W Weight kg Pack W
LGFM Logica FM
H
– STEEL CLIP supplied
MOUNTING ON A FIXTURE WITH T5 LAMPHOLDERS
– STEEL CLIP supplied
MOUNTING ON A FIXTURE WITH T8 LAMPHOLDERS
Thermofluidodynamic analysis: calculated heat dissipation
To ensure long duration and high performance of the LED source,a new technology has been used which simulates heat diffusion in thefixture: the thermofluidodynamic analysis allows you to foresee theworking temperature of the various components so as to optimize theheat dissipation system.
** Minimum flux guaranteed according to EN 60598-2-22
EMER
GENC
Y LE
D M
ODUL
ES
112
Dedicated invertersupplied
3.5 V700 mA (SE)350 mA (SA)
battery pack
Lungaluce – long lensmounted at a height of 3 m it covers an escape
route of 17.1 m with 1 lux in the middleand > 0.5 within 1 m
Largaluce – wide lensmounted at a height of 3 m it illuminates a surface
of 11.3 × 11.3m at 0.5 lux
Altaluce – high lensmounted at a height of 7 m it illuminates a surface
of 12.4 × 12.4 m at 0.5 lux
One module for several applications
113
Single mountingcovers an escape route of 17.1 m with 1 lux in the middleand > 0.5 within 1 m
Multiple mounting, fixture centre distance 18 mcovers an escape route of 35.1m with 1 lux in the middleand > 0.5 within 1m
Lungaluce – long lens mounting 3 m above the ground
Largaluce – wide lens mounting 3 m above the ground
Single mountingilluminates a surface of 11.3 × 11.3 m at 0.5 lux(128 m2)
Multiple mounting, fixture centre distance 13.2 milluminates a surface of 24.5 × 24.5 m at 0.5 lux (600 m2)
Altaluce – high lens mounting 7 m above the ground
Single mountingilluminates a surface of 12.4 × 12.4 m at 0.5 lux(154 m2)
Multiple mounting, fixture centre distance 13.7 milluminates a surface of 26.8 × 26.8m at 0.5 lux (718 m2)
EMER
GENC
Y LE
D M
ODUL
ES
SINGLEMOUNTING
1 m1 lx
17.1 m
3 m
MULTIPLEMOUNTING
3 m
1 m1 lx 1 lx
18 m
35.1 m
SINGLEMOUNTING
Illuminated area0.5 lx
12.4 m
12.4 m
7 m
26.8 m
26.8 m
7 m13.7 m
13.7 m
Illuminated area0.5 lx
ed areaaaaedn0.5
Illuminminnnnatenaaated5 lxlatena eded
MULTIPLEMOUNTING
MULTIPLEMOUNTING3 m
24.5 m
13.2 m
13.2 m
24.5 m
Illuminated area0.5 lx
SINGLEMOUNTING3 m
11.3 m
11.3 m
Illuminated area0.5 lx
Emergency light calculation on the ground
114
TR RM12 HOURSRECHARGE
IP20UV
L
B
H
H
BL
B
L1L2 L L
H
leD module
Battery
Inverter
A high-performance module for emergency lighting. Operation issubject to the installation of a traditional lighting fixture where the LEDmodule and relative inverter with battery set are installed. The kitcontains 3 special high-transparency PMMa lenses, for the lungaluce,altaluce and largaluce versions, for obtaining different illuminatedsurface areas. Can be installed at a height of 3 or 7 metres. The LEDmodule has an elastic clip fastening system for t8 and t5 tubes. Thehigh-efficiency LED features a heat sink in polyamide with graphite, toensure superb reliability and extend the life of the device.
EcoLED inverter module
GENERAL CHARACTERISTICS
Power range 1.5 W
Power supply 230 VAC ± 10 % 50 Hz
Operation Maintained (SA), Not Maintained (SE) Rest Mode: with optional control device (cod. 2730)
Standard EN 60598-1, EN 61347-2-7,EN 60598-2-22, EN 61347-2-13,EN 50172
Protection grade according to the fixture in which it is mounted
Autonomy 1h
Working temp. 0 ÷ +40 °C
Mounting on fixtures with T5 and T8 lampholders
Housing Graphite-charged polyamide
Optics lenses in highly transparent Polycarbonate
Light source LED
– 3 LENSES: LUNGA, LARGA, ALTA with 3 different covers – 2 SPRINGS FOR FIXING ON T8 AND T5 LAMPHOLDERS
Accessories supplied Order code Description Module LED 1.5 36 36 28 1 LED
Inverter – 114 32 22 –
Battery – 40 70 80 50 14.5 –
• Dimensions (mm) • Lamp W L L1 L2 B H
115
Thermofluidodynamic analysis: calculated heat dissipation
To ensure long duration and high performance of the LED source,a new technology has been used which simulates heat diffusion in thefixture: the thermofluidodynamic analysis allows you to foresee theworking temperature of the various components so as to optimize theheat dissipation system.
– LUNGALUCE supplied – LARGALUCE supplied – ALTALUCE supplied
LENSES SUPPLIED
19350 INVERTER LED SE 1N RM SE 1h 1 NCHT 3.6 V 0.75 Ah 1 0.25 6 1.5
TR Traditional Order code Description Model Autonomy N° LED Battery Absorption max W Weight kg Pack W
– STEEL CLIP supplied
MOUNTING ON A FIXTURE WITH T5 LAMPHOLDERS
– STEEL CLIP supplied
MOUNTING ON A FIXTURE WITH T8 LAMPHOLDERS
EMER
GENC
Y LE
D M
ODUL
ES
116
Lungaluce – long lensmounted at a height of 3 m it covers an escape
route of 11.8 m with 1 lux in the middleand > 0.5 within 1m
Largaluce – wide lensmounted at a height of 3 m it illuminates
a surface of 8.1 × 8.1 m at 0.5 lux
Altaluce – high lensmounted at a height of 7 m it illuminates
a surface of 9.3 × 9.3m at 0.5 lux
Dedicated Invertersupplied
battery pack
3 V500 mA
One module for several applications
117
3 m
11.8 m
1 lx1 m
SINGLEMOUNTING
3 m13 m
24.8 m
MULTIPLEMOUNTING
1 m1 lx 1 lx
9.3 m
9.3 m
7 m
Illuminated area0,5 lx
uminated area0,5 lx
Illuuu ea
SINGLEMOUNTING
20.5 m
20.5 m
7 m11 m
11 m
Illuminated area0,5 lx
ed areaaaaedn0,5 l
Illuminminnnnatenaaated5 lxlatena eded
MULTIPLEMOUNTING
8.1 m
8.1 m
3 mSINGLEMOUNTING
Illuminated area0,5 lx
16.7 m
16.7 m
3 m8.6 m
8.6 m
Illuminated area0,5 lx
MULTIPLEMOUNTING
ted lx
na
Single mountingcovers an escape route of 11.8 m with 1 lux in the middleand > 0.5 within 1m
Multiple mounting, fixture centre distance 13 mcovers an escape route of 24.8 m with 1 lux in the middleand > 0.5 within 1m
Lungaluce – long lens mounting 3 m above the ground
Largaluce – wide lenses mounting 3 m above the ground
Single mountingilluminates a surface of 8.1 × 8.1 m at 0.5 lux
Multiple mounting, fixture centre distance 8.6 milluminates a surface of 16.7 × 16.7 m at 0.5 lux
Altaluce – high lens mounting 7 m above the ground
Single mountingilluminates a surface of 9.3 × 9.3 m at 0.5 lux
Multiple mounting, fixture centre distance 11 milluminates a surface of 20.5 × 20.5 m at 0.5 lux
EMER
GENC
Y LE
D M
ODUL
ES
Emergency light calculation on the ground
118
Acciaio Eco LED on an electrified rail is a typicalinstallation in industrial environments, workshopand high-risk areas. Acciaio Eco LED is also avail-able in the ATEX version for a particularly heavy-duty situation and, thanks to the steel housing andtechnopolymer heads, it possesses very high re-sistance (IP66-IK09).
119
120
I. General ProvisionsThese General Terms and Conditions define the relationshipsbetween BEGHELLI-ELPLAST,a.s., registered office at Poříčí 3a,603 16 Brno, ID no.: 46347909 (hereinafter as “Beghelli-Elplast”),incorporated in the Companies Register kept by the Regional Courtin Brno, Section B, File 811, as the Seller, and its customers(hereinafter the “Buyer”) in the sale of products, goods, and servicesof Beghelli-Elplast (hereinafter as “Products”).
II. Priority of DocumentsIn cases of any discrepancy between the provisions of the individualdocuments defining the relationships between Beghelli-Elplast andthe Buyer, to the extent of their inconsistency, the documents shallhave the following priority:1. Ad hoc terms and conditions agreed individually for a given busi-
ness case and confirmed in writing by both parties in the relevantbusiness documentation (demand letter, offer, purchase order,purchase order confirmation, invoice).
2. Purchase contract or framework purchase contract if entered intobetween Beghelli-Elplast and the Buyer.
3. Special terms and conditions which form a part of the purchasecontracts or the framework purchase contracts between Beghelli-Elplast and the Buyer.
4. These General Terms and Conditions (“GTC”).
III. Ordering ProcedureThe Buyer submits its purchase order in writing by electronic mail orfax. The purchase order must contain, among other things, a clearspecification of the Products, their quantities and the required deli -very date. The purchase order becomes binding upon its delivery toBeghelli-Elplast. Unless explicitly agreed in writing between Beghelli-Elplast and the Buyer in the documentation under article II hereof,any part of the Buyer’s purchase order which is in conflict with orotherwise inconsistent with these GTC shall be dismissed and shallnot become part of any business contract between Beghelli-Elplastand the Buyer.
Beghelli-Elplast shall confirm the purchase order and specify thedelivery date or possibly also the available quantity in writing byelectronic mail or fax. If Beghelli-Elplast is not able to confirm within48 (forty eight) hours the date of delivery of some or all purchaseorder items, Beghelli-Elplast shall at least confirm the acceptance ofthe purchase order with information on the estimated date of thesending of the final purchase order confirmation. Beghelli-Elplastdoes not have any liability for non-acceptance of the Buyer’spurchase order or any part thereof.
If within 7 days from the acceptance of the purchase orderconfirmation or within a shorter period of time, with view to theestimated delivery date, the Buyer does not express by electronicmail or fax its disagreement with the estimated delivery dates orsome other facts different from its purchase order, the purchaseorder confirmation becomes the only binding and final documentsuperior to the Buyer’s purchase order. Any changes in soconfirmed purchase order are only possible in very exceptionalcases and only after prior written approval by Beghelli-Elplast andmust be made by cancelling the relevant item in the originalpurchase order and issuing a new purchase order.
Where the estimated delivery date specified in the purchase orderconfirmation cannot be met, Beghelli-Elplast shall inform the Buyeron this fact within no later than 1 (one) day before the estimateddelivery date with specification of an alternative delivery date.
Beghelli-Elplast shall not in any case be liable for any loss of profit,operational loss or any special, consequential, incidental or punitivedamage(s) of any kind for the failure to meet the delivery datesspecified in the said purchase order confirmations.
IV. Product Delivery / AcceptanceUnless stated otherwise in the documentation under article II ofthese GTC, the Products shall be delivered EXW, Brno (location ofthe Beghelli-Elplast distribution warehouse or production plant). Thepassing of the costs and risks from Beghelli-Elplast onto the Buyershall be governed by the applicable conditions of Incoterms 2010.
At the acceptance of the Products at the time and place as per theapplicable delivery terms the Buyer is obligated to verify or haveverified the conformity of the delivery as regards types, quantities,completion and external damage. Unless within 7 (seven) calendardays from acceptance of the delivery the Buyer submits a warrantyclaim in the manner specified at the Beghelli-Elplast website or byelectronic mail or fax, the risk of insufficient quantity, incompletenessor external damage of the Products shall pass onto the Buyer—exceptwhere a due inspection cannot be performed without damaging thepackaging of the individual Products. In these cases the time limitfor the submission of such warranty claim shall be prolonged untilsuch time as the inspection may be performed for the first time, butnot for more than 14 (fourteen) calendar days from the acceptanceof the delivery.
V. PaymentThe Buyer shall make the payment for the delivered Products withinthe time limits and to the bank account specified in the invoicesissued by Beghelli-Elplast. Regarded as the payment date is the daywhen the money is credited to the Beghelli-Elplast account.
Should the Buyer be in delay with the payment, Beghelli-Elplast maydemand the payment of late payment interest in the amount of 0.1%of the debt for each commenced day of the delay. Payment of theinterest does not affect the right of Beghelli-Elplast to the compen -sation of damage, if any, caused by the late payment. In the eventof the Buyer’s material delay with the payment Beghelli-Elplast hasthe right to cancel all of the Buyer’s remaining purchase orders anddemand an immediate payment for all its invoices issued to theBuyer regardless of their maturity. This shall not affect Beghelli-Elplast’s right to compensation of any related damage.
VI. Reservation of TitleThe parties hereby agree that the title to the subject-matter of thisContract shall pass onto the Buyer upon the payment of the entirepurchase price, while the risk of loss and destruction of the thingshall pass onto the Buyer upon its handover and acceptance. Untilsuch time as the purchase price is paid, the Buyer may not disposeof the thing as its owner despite being obligated to take care for thething as a proper manager and at its own expenses. If the purchaseprice is not paid duly and in time, the Buyer is obligated to return thething to the seller upon first demand.
If the Buyer resells the thing, depending on its specification, toanother party, the reservation of the title under this provision appliesfrom the moment of effectiveness of the sale to all performancesduly agreed and accepted or procured by the Buyer for the resale ofthe thing. In this case the Buyer is obligated to immediately forwardto the seller the entire performance so obtained or transfer onto theseller the title to such performance up to the amount of the obli -gation for the payment of the purchase price under the contract.
121
General Terms and Conditions
The return of the delivered Products because of their non-paymentdoes not relieve the Buyer from the obligation to pay for thoseProducts which were not returned, pay the difference of the value ofthe Products not returned in the same quality in which they hadbeen delivered and pay the entire late payment interest to whichBeghelli-Elplast has become entitled.
VII. Prices, Payment and Delivery TermsThe prices or other business conditions specified in Beghelli-Elplast’s price lists, promotion or other business materials are forinformation only and do not give rise to the Buyer’s entitlement tosuch prices. The price of the Product shall be determined byagreement of the parties.
The prices specified in the price lists are given without VAT and donot contain any recycling or other fees which shall, where requiredby applicable regulations, be invoiced separately.
Beghelli-Elplast reserves the right to change the prices, payment,delivery and other business terms in the event of sudden changesin the prices of materials, energies or other sub-deliveries and othercosts and facts which Beghelli-Elplast is not able to influence oravert. So changed prices or business terms shall be applicable to allProducts already ordered by the Buyer and confirmed by Beghelli-Elplast with immediate effect upon the delivery of the notice to theBuyer by electronic mail or fax. In such case the Buyer has the rightto withdraw from so affected and not yet delivered purchase ordersor any part thereof.
VIII. Exchange of ProductsBeghelli-Elplast reserves the right to change or alter at its own dis-cretion the technical specification of the Products or change theproduct range by stopping the production of some Products orchanging existing or supplementing new Products, provided thatsuch changes do not negatively influence in a material manner theuse, dimensions or life time of such Products.
IX. WarrantySubject to article VIII of these GTC, Beghelli-Elplast guarantees thatthe Products will have identical design and the characteristicsspecified in their technical and business documentation and be freeof any material and production defects, unless specified otherwisein the documentation accompanying the individual Products, for theperiod of 24 (twenty four) months from the day of the handover ofthe Goods to the Buyer (“Warranty Period”). After the expiry of theWarranty Period the Buyer loses the right to compensation of anydamage due to such non-conformities.
If any non-conformity of the delivered Products occurs during theWarranty Period, the Buyer is obligated to inform Beghelli-Elplastusing the procedure specified for that purpose via the Beghelli-Elplast website or by electronic mail or fax and do so within no laterthan 3 (three) business days from the discovery of such fact andgive Beghelli-Elplast the required information and assistance,including during the taking of the samples of the claimed Productsand their sending to the Beghelli-Elplast headquarters. If the Buyerdoes not inform Beghelli-Elplast within the prescribed time limit of 3days, all warranty claims and claims from defects cease to exist.
If Beghelli-Elplast accepts a warranty claim as legitimate, it shall givethe Buyer a remedy in the following forms and order:- repair of the defective Product or exchange of its defective parts;- replacement of a defective Product for a perfect one;- purchase price refund.
The decision on the form of the remedy is fully at the discretion ofBeghelli-Elplast depending on the technical, logistic and otherconditions. Beghelli-Elplast may also grant the Buyer an adequateprice discount if the Buyer agrees. The parties rule out the provi -sions of Section 2106 and Section 2107 of Act no. 89/2012 Coll.
Without a prior written approval by Beghelli-Elplast the Buyer maynot in any case send the claimed Products back to Beghelli-Elplastor delay or postpone partial or full payment of the invoices for theclaimed Product. The parties rule out the provisions of Section 2108of Act no. 89/2012 Coll.
The consignment with the claimed goods must be visibly marked bythe attached warranty claim number. The address for the sending ofwarranty claims is Rybářská 3, 603 16 Brno. The claimed goodsmay not be sent to be paid cash on delivery or at the costs ofBeghelli-Elplast.
This warranty does not cover any defects in the consequence ofusual wear and tear; accelerated wear and tear caused by specialphysical, chemical or electrochemical conditions; insufficient mainte -nance or incorrect repair; non-compliance with storage, assembly oruse instructions; use of unsuitable materials and tools or anydefects caused by consequences beyond the control of Beghelli-Elplast.
Apart from the warranties expressly mentioned herein, there are noother direct or indirect warranties exceeding those given herein. Theparties rule out the liability of Beghelli-Elplast for any loss of profit,operating loss or special, consequential, incidental or punitivedamages or damages of any other kind based on a warranty claimor otherwise relating to the Products delivered by Beghelli-Elplastunder these GTC or as part of the individual business casesgoverned by these GTC. The Buyer shall not grant any warranty,direct or indirect, in relation to any Product different from thewarranty granted by Beghelli-Elplast for such Product.
X. Force MajeureBeghelli-Elplast shall not be liable for any partial or complete non-fulfilment of its obligations under these GTC, in particular for anypostponement, delay or cancellation of Buyer’s purchase orders,even if already confirmed, in situations beyond Beghelli-Elplast’scontrol, including but not limited to:- force majeure, war, uprising, civil unrests, embargoes,
interventions of civil or military bodies;- changes concerning administrative, public health and medical laws
or regulations;- strikes, work-related or other stoppages of production;- transport problems;- fire, flood or other natural disasters.
In such events the Buyer shall not be entitled to the compensationof any damage, penalties or any other direct or indirect indemnity.
Similar situations give the Buyer the right not to take over alreadyordered or already produced Products, nevertheless, no suchsituation gives the Buyer the right not to fulfil its obligations fromProducts already delivered, in particular the obligation to pay thepurchase price for them in full and within the agreed deadlines.
Where the parties are not able to fulfil their respective obligations forsuch reasons, Beghelli-Elplast and the Buyer shall inform the otherparty of such fact as well as of the disappearance of their effectswithout undue delay.
122
XI. Governing Law – JurisdictionRelationships not regulated by these GTC or possibly otherdocuments under article II of these GTC shall be governed by:- where the Buyer is an entity under law of the Czech republic: by
the applicable generally binding legal regulations of the CzechRepublic, the provisions of Act no. 89/2012 Coll., Civil Code, asamended;
- where the Buyer is a foreign entity: by the United NationsConvention on contracts for the international sale of goods,Vienna, of 11 April 1980).
All disputes arising between Beghelli-Elplast and the Buyer that arenot resolved amicably shall be heard and finally decided by thecompetent court of the Czech Republic with local and subject-matter jurisdiction.
Attention:These General Terms and Conditions are continually updated andthey are included in this catalogue for information purposes only.You will receive the binding and currently valid General Terms andConditions together with the business documentation or thecontract or they will be delivered to you upon request.
The Products included in this catalogue have been produced incompliance with the applicable safety regulations, primarily Act no.22/1997 Coll., on the Technical Requirements for Products,Government Regulation no. 118/2016 Coll., on conformityassessment of electrical equipment designed for use within certainvoltage limits delivered to the market (directive of the EuropeanParliament and of the Council 2014/35/EU) and GovernmentRegulation no. 117/2016 Coll., on conformity assessment ofproducts in terms of electromagnetic compatibility, when placed onthe market (Regulation of the European Parliament and of theCouncil 2014/30/EU), as all amended by later regulations. The CEmark placed on the Products, packaging or in the instructions foruse certifies the compliance with the above-named regulations.
The Beghelli-Elplast technical archive contains all the documentationproving that the Product was submitted to the tests for demon stratingcompliance. This documentation is available to the competentbodies for inspection, if required.
Beghelli-Elplast reserves the right to change the data contained inthis catalogue without prior notice.
All the products included in this catalogue are covered by thewarranty under the Beghelli-Elplast General Terms and Conditionsand under valid legal regulations.
In Brno on 11 June 2018
BEGHELLI - ELPLAST,a.s.Poříčí 3A, 603 16 Brno, Czech RepublicPhone: +420 531 014 111, fax: +420 531 014 210E-mail: [email protected], www.beghelli.cz
General Terms and Conditions
123
Product safetyand European Standards
Environmental protectionROHS 2011/65/UE DIRECTIVEIn order to facilitate the recovery and recycling of electrical equipment and to prevent dangerous substances from accumulating in the environment, the European Community haspublished the ROHS (Restriction of Hazardous Substances) Directive. Essentially, this statesthat:
Without prejudice to Annex 3, it is prohibited to place electrical and electronic equipmentfalling under the categories identified in Annex 1 on the market, namely those containinglead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybromi-nated diphenyl ether (PBDE) in amounts higher than those provided for in Annex 2.
In Italy, the Directive has been implemented through Legislative Decree No. 27 of 4 March2014.
WEEE 2012/19/EU DIRECTIVEThe amount of waste directly connected to electrical and electronic equipment (WEEE) is rapidly increasing, with much of this attributable to light sources.
The directive is primarily designed to prevent WEEE from being thrown into landfill orincinerators at end of life, causing a further serious impact on the environment.
Accordingly, Directive 2012/19/EU was introduced in order to implement a monitoring mechanism which includes the controlled management of devices at end of life, promotingthe reuse or recycling of these. Furthermore, the legislative mechanism promotes design andproduction concepts which facilitate the disposal of products, both with regard to disassemblyand materials.
Industry players from every stage of the marketing chain are called upon to make a contribution - some of these contributions are financial, whereas others involve actions designed to respect and support the spirit of the Directive (as well as to protect the environment).
In Italy, the Directive has been implemented through Legislative Decree No. 49 of 14 March2014.
THE MAIN OBLIGATIONS ARE AS FOLLOWS
The manufacturer (to be understood in the broadest sense, essentially entailing companiesaffixing their brand to a given good or goods, and all those importing from third countries) is responsible for the costs relating to the end-of-life disposal of their products.
The consumer is asked to ensure that he/she takes an intelligentapproach to managing the product in question at the end of its life,delivering it to a suitably equipped facility or point of sale, or followingany other instructions provided by the manufacturer.
Beghelli has always been extremely sensitive to environmental issues, and is a founding member of the ECOLIGHT consortium.
Choosing products from companies that participate in voluntarywaste recovery and recycling initiatives is a responsible and environmentally-sound choice, and helps to protect the environmentand our future.
The products that fall within the scope of the WEEE Directive are identified by thecrossedthrough bin symbol, as mentioned alongside here.
PRODUCTS SAFETY AND EUROPEAN STANDARDSBeghelli products are constructed in accordance with the highest safety and quality standards,and no compromise is made with regard to foreseeable overload conditions or to the safetyof persons, domestic animals or property, provided that all devices are installed and used forthe purpose for which they are intended, under the environmental conditions provided, andare fitted correctly and maintained properly by qualified personnel.
Where applicable, products are manufactured in compliance with the requirements of Com-munity directives 2014/35/EU, 2014/30/EU, 2014/53/EU, 2014/30/EU, 2009/125/EC and2001/65/EC.The CE marking affixed to the product and/or packaging and/or any instructions for use whichaccompany the product certify compliance with the above Directives. Beghelli keeps its ownTechnical Archive containing the documentation which demonstrates that the product in ques-tion has been examined to assess compliance with these Directives. The documentation inthe Technical Archive is available for inspection by the competent authorities.
Products that do not fall within the scope of the EC Directives referred to above nonethelesscomply with the quality standards set out in the various regulations currently in force, as wellas those contained in Directive 2001/95/EC ("the General Product Safety Directive"), imple-mented by Legislative Decree no. 172/2004.
The information contained in the Beghelli catalogues may be subject to change without notice.All instructions, measurements, drawings and photographs of products and components areprovided for information purposes only, and are subject to change without prior notice. Thisinformation should not be considered to be pre-contractual information. All products that areto be connected to mains power must be fitted in accordance with the electrical installationrules in force in the country of destination, and with the information contained in the productcatalogues and/or the instructions included with the product itself.The product catalogues are available on the Beghelli website at www.beghelli.it at the fol-lowing link, or can be requested from:Beghelli S.p.A. Sales Management - Via Mozzeghine, 13/15 Loc. Monteveglio - 40053Valsamoggia, Bologna
124
1230 64, 651231 64, 651232 54, 551233 72, 731234 72, 731235 72, 731236 64, 653504 823505 823506 823507 823905 828010 828012 828066 828067 8210404 54, 5512657 9212658 86, 88, 89, 90, 9112659 86, 90, 78, 9212661 88, 89, 90, 9212662 88, 89, 90, 9212663 84, 86, 90, 91, 92, 9312664 86, 87, 90, 9212665 8414120 72, 7314121 72, 7314357 7614358 7614500 34, 3514501 34, 3514502 34, 3514503 34, 3514504 34, 3514505 34, 3514510 3614511 3614512 3614513 3614514 3614515 3614516 3614520 3814521 3814522 3814523 3914524 3814525 3814526 3914527 3914528 3814529 3814530 3114531 3714532 3114533 3114534 3114535 3114536 3114537 3114538 3714539 3114540 3414541 3414542 3414543 3414544 3414545 34
14568 34, 3514569 3414580 3115018 7815019 78, 8015022 10215024 10215034 10215035 3715039 10315040 10319341 11119342 11119343 11119350 11519355 10719356 10719358 10519359 10519364 10719365 10719367 10519368 10519371 10519372 10719373 10519375 10819376 10819377 10519390 10919391 10920080 18, 1920081 18, 1920082 78, 7920085 78, 7920086 78, 7920087 18, 1920088 18, 1920090 68, 69, 70, 7120091 68, 69, 70, 7120094 50, 52, 5320097 46, 47, 5020098 68, 69, 70, 7120100 48, 49, 52, 5320102 10020104 10120107 7820108 10120109 100, 10320122 78, 7920123 8020124 10020125 8020126 20, 22, 25, 26, 27, 28, 2920127 2020128 66, 6720129 66, 6720133 2020134 20, 22, 26, 27, 28, 2920135 20, 2220136 20, 2220137 20, 2220138 20, 22, 24, 25, 26, 27, 2820139 20, 22, 24, 25, 26, 27, 28, 2920140 20, 23, 2420141 20, 23, 26, 27, 28, 2920142 20, 2320144 20, 23, 26, 28
20145 20, 23, 26, 27, 28, 2920146 20, 23, 2520147 20, 23, 24, 2570033 46, 47, 48, 49415439001 108415440001 108418319000 78, 86, 88, 90, 92, 94, 9611288ED 8511288PED 8511288PSD 8511288SD 8511289ED 8511289SD 85118SD 83136SD 83158SD 83170ED3 67170EDMC 67170SD3 67218ED 83218SD 83226ED4 67226EDMC 67226SD4 67236ED 83236PLSD 53236PSD 83236SD 83258ED 83258SD 83280SD 8336-999/414/NW 57418PSD 51418PSDIP65 5190-0096N 1490-081/120/ES 1690-082/120/ES 1699-0094 10, 1499-0095 10, 1499-0123 1499-0124 4499-0125 14, 4499-0205 86, 8799-0206 86, 8799-0275 1099-0296 1099-0297 4099-080/120/ES 16A11-10001CM 15A11-10001CMSD 15A11-10001CW 15A11-10001CWSD 15A11-10002CM 15A11-10002CMSD 15A11-10002CW 15A11-10002CWSD 15A11-10008CM 15A11-10008CMSD 15A11-10008CW 15A11-10008CWSD 15A11-10009CM 15A11-10009CMSD 15A11-10009CW 15A11-10009CWSD 15A11-10016CM 45A11-10016CMSD 45A11-10016CW 45A11-10016CWSD 45
Code Page Code Page Code Page
Warranty LimitationThe technical information contained in this catalogue are based on the state as of thedate of its printing. Beghelli reserves the rightto make changes. Contact the Beghelli salesnetwork for information about the current situation. The warranty doesn’t apply to printingerrors and colour variations which are displayedin this catalogue.
May 2019
125
A11-10017CM 45A11-10017CMSD 45A11-10017CW 45A11-10017CWSD 45A11-10025CM 45A11-10025CMSD 45A11-10025CW 45A11-10025CWSD 45A11-10026CM 45A11-10026CMSD 45A11-10026CW 45A11-10026CWSD 45A11-10027CM 15A11-10027CMSD 15A11-10027CW 15A11-10027CWSD 15A11-10028CM 15A11-10028CMSD 15A11-10028CW 15A11-10028CWSD 15A11-10029CM 45A11-10029CMSD 45A11-10029CW 45A11-10029CWSD 45A11-10030CM 45A11-10030CMSD 45A11-10030CW 45A11-10030CWSD 45A11-10031CM 15A11-10031CMSD 15A11-10031CW 15A11-10031CWSD 15A11-10032CM 45A11-10032CMSD 45A11-10032CW 45A11-10032CWSD 45A136E 79A136ESD 79A158E 79A158ESD 79A218ESD 79A236E 79A236ED 79A236ESD 79A236EXSD 81A258E 79A258ED 79A258ESD 79A258EXSD 81A280ESD 79A280EXSD 81A31-10117CWED 57A31-10117CWSD 57A36-10150CWSD 57A39-10148C 17A39-10148CSD 17A39-10149C 17A39-10149CSD 17A61-10061CZED 12A61-10061CZSD 12A61-10061CWED 11A61-10061CWSD 11A61-10061PCZED 12A61-10061PCZSD 12A61-10061PCWED 11A61-10061PCWSD 11A61-10062CZED 12A61-10062CZSD 12
A61-10062CWED 11A61-10062CWSD 11A61-10062PCZED 12A61-10062PCZSD 12A61-10062PCWED 11A61-10062PCWSD 11A61-10063CZED 12A61-10063CZSD 12A61-10063CWED 11A61-10063CWSD 11A61-10064CZED 12A61-10064CZSD 12A61-10064CWED 11A61-10064CWSD 11A61-10R61CZED 42A61-10R61CZSD 42A61-10R61CWED 41A61-10R61CWSD 41A61-10R61PCZED 42A61-10R61PCZSD 42A61-10R61PCWED 41A61-10R61PCWSD 41A61-10R62CZED 42A61-10R62CZSD 42A61-10R62CWED 41A61-10R62CWSD 41A61-10R62PCZED 42A61-10R62PCZSD 42A61-10R62PCWED 41A61-10R62PCWSD 41A61-10R63CZED 42A61-10R63CZSD 42A61-10R63CWED 41A61-10R63CWSD 41A61-10R64CZED 42A61-10R64CZSD 42A61-10R64CWED 41A61-10R64CWSD 41D1150LORSD 73D1150SD 71D170LORSD 73D170SD 71D226SD 69F250ASD 89F250SSD 89F30LED 95F400ASD 89F400SSD 89F50LED 95F70LED 95FH150SD 93FH200SD 93FH350SD 91FH70SD 93H250CSD 87H250ESD 87H250SD 87H400CSD 87H400ESD 87H400SD 87I418LED 55I418SD 55I418SDPC 55I418SDVT 55I418TRLED 55LF218ED 21LF218SD 21LF236ED 21
Code Page Code Page Code Page
Index
LF236SD 21LF280ED 21LF280SD 21LP236ED 49LP236SD 49LP258ED 49LP258SD 49LP418ED 47LP418SD 47P236SD 19P258SD 19R1150ED24 64R1150MFED24 64R1150MFSD24 65R1150SD24 65R170ED24 64R170MFED24 64R170MFSD24 65R170SD24 65S100EXLSD 97S100EXSD 97S100UCSD 97S150EXLSD 97S150EXSD 97S250EXLSD 97S250EXSD 97S30UCSD 97S50EXLSD 97S50EXSD 97S50UCSD 97S70EXLSD 97S70EXSD 97S70UCSD 97WW135SD 75WW170SD 75Z1150ASD 61Z1150CSD 77Z1150ED 58Z1150MFED 58Z1150MFSD 59Z1150SD 59Z120A 63Z135ASD 61Z135CSD 77Z135MFSD 59Z135SD 59Z150A 63Z170ASD 61Z170CSD 77Z170ED 58Z170MFED 58Z170MFSD 59Z170SD 59Z2150CSD 77Z235CSD 77Z270CSD 77
881
100
159
BEGHELLI - ELPLAST,a. s., Poříčí 3A, 603 16 Brno, Czech Republictel.: +420 531 014 111, fax: +420 531 014 210, e-mail: [email protected], www.beghelli.cz