Disclosure to Promote the Right To Information
Whereas the Parliament of India has set out to provide a practical regime of right to information for citizens to secure access to information under the control of public authorities, in order to promote transparency and accountability in the working of every public authority, and whereas the attached publication of the Bureau of Indian Standards is of particular interest to the public, particularly disadvantaged communities and those engaged in the pursuit of education and knowledge, the attached public safety standard is made available to promote the timely dissemination of this information in an accurate manner to the public.
इंटरनेट मानक
“!ान $ एक न' भारत का +नम-ण”Satyanarayan Gangaram Pitroda
“Invent a New India Using Knowledge”
“प0रा1 को छोड न' 5 तरफ”Jawaharlal Nehru
“Step Out From the Old to the New”
“जान1 का अ+धकार, जी1 का अ+धकार”Mazdoor Kisan Shakti Sangathan
“The Right to Information, The Right to Live”
“!ान एक ऐसा खजाना > जो कभी च0राया नहB जा सकता है”Bhartṛhari—Nītiśatakam
“Knowledge is such a treasure which cannot be stolen”
“Invent a New India Using Knowledge”
है”ह”ह
IS 8349 (1977): Deviations for untoleranced dimensions ofmalleable iron castings [MTD 6: Pig iron and Cast Iron]
IS : 8349 - 1977
Indian Standard
DEVIATIO~NS FOR UNTOLERANCED DlMENSIONS OF
MALLEABLE IRON CASTINGS
Cast Iron and Malleable Cast Iron Sectional Committee, SMDC 9
Chairman
DR PRANLAL PATEL Representing
Malleable Iron & Steel Castings Co Pvt Ltd, Bombay
Members
SHR~ M. C. AICH
DR S. N. ANANT NARAIN SHRI R. M. BALANI
Directorate General of Supplies & Disposals, ( Inspection Wing ), New Delhi
International Nickel ( India ) Pvt Ltd, Bombay Directorate General of Technical Development,
New Delhi SHRI T. R. MOHAN RAO ( Afternafe )
SHRI B. C. B~SWAS National Test House, Calcutta SHRI D. G. DODHIA Shah Malleable Castings Ltd, Thane SHRI K. S. GARG Electrosteel Castings Ltd, Calcutta
SHRI S. N. AGRAWAL ( Alternale ) SHRI GOVIND S~NGH Greysham & Co, Delhi SHRI F. S. KATPITIA Jyoti Ltd, Vadodara
SHRI M. R. SHAH ( Alternate ) DR K. V. KRISANAMURTHY Hindustan Steel Ltd ( R & D ), Ranchi SHRI K. K. MALLICK Ministry of Defence ( DGOF ), Calcutta CDR K. N. NAIR Pioneer Equipment Co Pvt Ltd. Vadodara
SHRI P. V. R. RAO ( Alternate ) SHRI P. C. NE~CY Indian Iron & Steel Co Ltd, Kulti
SHRI K.~S. LAL ( Afternate ) SHRI R. A. PANDURANGA Best & Crompton Engg Ltd, Madras
SHRI M. BAPUJEE ( Alternate ) DR P. S. PA~IHAL
SHRI B. K. GIRI ( Alternate ) Tata Engineering & Locomotive Co Ltd, Jamshedpnr
SHRI A. S. N. RAO Bharat Heavy Electricals Ltd, New Delhi SHRI A. K. MITTAL ( Alternate I ) SHRI A. SOMA~UNDARAM ( Alternate 11 )
SHRI G. K. P. RAO Oil and Natural Gas Commission, Dehra Dun SHRI B. G. SASTRY
SHRI M. S. DALVI ( Alternate ) Ductron Castings Ltd, Hyderabad
(Continued on page 2 )
@I Copyright 1977
INDIAN STANDARDS INSTITUTION This publication is protected under the Indian Copyright Act ( XIV of 1957 ) and reproduction in whole or m part by any means except with written permissjon of the publisher shall be deemed to be an infringement of copyright under the said Act.
IS : 8349 - 1977
( Conrinued from page 1 )
Members Representing
SENIOR CHEMIST & METALLURGIST. Ministry -of Railways CHITTARANIAN LocoMOTIve WORKS. CH~TTAIUNJAN
ASSISTANT DIRECTOR ( MET )- 1~~~41, RESEARCH DESIGNS & STANDARDS ORGANIZA- TION, LUCKNOW ( Alternate )
SHR~ C. S. S. Sm Ennore Foundries Ltd. Madras SHRI T. S. VENKOBA RAO ( Alfernate )
SHRI J. N. SHARMA Heavy Engineering Corporation Ltd. Ranchi SHRI T. N. TANDON ( Alternate )
SHRI P. J. SHENOY Kesoram Spun Pipes & Foundries, Calcutta SHRI S. C. NARSARIA ( Alternate )
SHRI R. K. SINHA Fertilizer Corporation of India Ltd, Sindri SHRI D. SRINIVASAN Joint Plant Committee, Calcutta
SHRI B. P. GHOSH ( Aifernate ) DR S. K. TIWARY National Metallurgical Laboratory ( CSIR ),
Jamshedpur SHRI C. R. RAMA RAO. Director General. ISI ( Ex-officio Member)
Director ( Strut & Met )
Secretary
SHR~ SHANTI SWARUP Assistant Director ( Metals ). IS1
Panel for Malleable Iron Castings, SMDC 9:Pl
Convener
DR PRANLAL PATEL Malleable Iron & Steel Castings Co Pvt Ltd, Bombay
Members
SHRI A. ANJANEWLU India Cements Ltd, Madras SHRI C. CHATTERIEE Indian Standard Metal Co Ltd. Bombay
SHRI I. T. POONAWALLA ( AIfernare ) C A E M I ST & METALLURGET, Ministry of Railways
CHIXTARANJAN LOCOMOTIVE WORKS, CHITTARANJAN
ASSIZGTANT DIREXTOR ( MET iNSP ). RESEARCH DESIGNS & STANDARDS ORGANIZA- TION,~IITTARANJAN (Alternote )
DR D. KUMAR SHRI GOVIND SINGH
Maiviya Regional Engineering College, Jaipur Greysham & Co, Delhi
SHRI AYRIT LAL GUPTA New Small Scale Manufacturers Association, Juliundar
SHFU H. A. JA~SINGHANI Mahkzinbfy Mahindra Ltd (Automobile Division),
SHRI A. R. RANADIVE ( Altermate )
( Continued on page 7 )
2
IS : 8349 - 1977
Indian Standard
DEVIATIONS FOR
UNTOLERANCED DIMENSIPNS OF MALLEABLE IRON CASTINGS
0. FOREWORD
-0.1 This Indian Standard was adopted by the Indian Standards Institution on 31 January 1977, after the draft finalized by the Cast Iron and Malleable Cast Iron Sectional Committee had been approved by the Str_uctural and Metak Division Council.
0.2 The main object of this standard is to help the producers and the users of malleable iron castings to improve and simplify their production and distribution, eliminate waste of time and material involved in production and set up standards of quality and dimensions. It is hoped that this standard will satisfy a long-felt need by simplifying the application of agreed limits to drawings.
0.3 Casting tolerances in malleable iron depend mainly on the manufacturing process, that is, hand-moulding, machine-moulding or any other improved process. In the case of malleable iron, the process of heat treatment also plays a very important role in guiding the tolerances.
0.4 The deviations specified in the standard relate to unmachined castings. The machining allowances have not been taken into account in the deviations for untoleranced dimensions of castings. They are to be added for outside dimensions and subtracted for internal dimensions. The machin- ing allowance should not be less than the minimum machining depth necessary plus the negative deviation in the case of outside dimension and the positive deviation in the case of internal dimension.
0.5 This standard keeps in view the manufacturing and trade practices followed in the country in this field. While preparing this standard, assistance has been derived from DIN 1684 ( Blatt 1 ) 1962 Deviations for untoleranced dimensions of malleable iron castings, Tolerance Groups A, B and C, issued by Deutscher Normenausschuss.
0.6 For the purpose of deciding whether a particular requirement of this standard is complied with, the final value, observed or calculated, express- ing the result of a test or analysis, shall be rounded off in accordance with IS: 2-1960*. The number of significant places retained in the rounded off value should be the same as that of the specified value in this standard.
*Rules for rounding off numerical values ( revised ).
3
Is:8349- 1977
1. SCOPE
1.1 This standard covers the deviations for untoleranced dimensions of malleable iron castings. Three classes of deviations are dealt with as given below:
Class 1
Class 2
Class 3
Deviations for malleable iron castings involving improved moulding processes for precision work.
Deviations for malleable iron castings involving machine mouldiog process.
Deviations for malleable iron castings involving hand moulding process.
2. DEVIATIONS
2.1 Len@, Width, Height and Centre-to-Centre Distance - The deviations on untoleranced dimensions of malleable iron castings shall be as given in Tables 1 and 2.
TABLE 1 DEVIATIONS ON UNTOLERANCED LENGTH, WIDTH, HEIGHT AND CENTRETO-CENTRE DISTANCE ON
MALLEABLE IRON CASTINGS ( CLASS 1)
( Cluuses 2.1 und 2.3 j
Ail dimensions in millimetres.
RANGE OF NOMINAL DIMENSIONS t A ,
Up to Over Over Over Over Over Over Over Over 18 18 30 50 80 120 200 315 500
:” to 50 k? l% :&I ::5 5% ::0
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
O-utside +o-9 +I’1 +1.3 +1*5 +1*8 +2.1 +2.6 +3-l f3.8 dimension
-0-7 -0.8 -1 -1.2 -1.4 -1.9 -21 -2.5 -3
Inside dimension i-O.7 +@8 +l +1*2 +1*4 +1.9 +21 +2*5 +3 and centre-to- centre distance -0-9 -1.1 -13 -13 -1.8 -21 -26 -3.1 -3.8
IS : 8349 - 1977
TABLE 2 -DEVIATIONS ON UNTOLERANCED LZNGTH, WIDTH, HEIGHT AND CENTRE-TO-CENTRE DISTANCE OF
MALLEABLE IRON CASTINGS (CLASSES 2 AND 3 )
( Clauses 2.1 and 2.3 )
All dimensions in millimetres.
I-OLk!R- RANGE OF NOMINAL DIMENSIONS ANCE r ,
CLASS U&t 9’8”
Over %’
Over 50 500
:“o l% 5% 8%
(1) (2) (3) (4) (5) (6) (7)
r
Outside dimension 21’”
+2 +4 +6 +8 -1.5 -25 -3.5 -5
2
I
Inside dimension +I +5 and centre-to- -I’2
_‘;5 Y
“_;5 -8
1 cemre distance
r
Outside dimension +2 +3 ZJ.5 -‘I
+9 -1 -2 -1
3 <
i
Inside dimension 3-l and centre-to- -2 _‘:
“:” +5 +7 -7 -9
centre distance
*Deviations for large range of nominal dimensions shall be agreed to between tbe purchaser and the manufacturer.
2.2 Thickness -The deviations on untoleranced wall thickness shall be as given in Tables 3 and 4.
TABLE 3 DEVIATIONS ON UNTOLERANCED WALL THICKNESS OF MALLEABLE IRON CASTINGS ( CLASS 1)
( Chuses 2.2 and 2.2.1 )
All dimensions in millimetres.
RANGE OF NOMINAL DIMENSIONS r L
up to Over Over \
Over Over 6 6 10 18 30
to to to 10 18 30 5”o
+0.9 +1*1 +1.4 +1*7 -f-2
-03 -0.9 -1.1 -1.3 -1.6
5
IS : 8349 - 1977
TABLE 4 DEVIATIONS ON UNTOLERANCED WALL THICKNESS OF MALLEABLE IRON CASTINGS ( CLASSES 2 AND 3 )
( c1au%?s 2.2 und 2.2.1 )
All dimensions in millimetres.
TOLERANCE CLASS
(1)
2
3
RANGE OF NOMINAL DIMENSIONS c-----
u”6 to Over Over 6 18
Ii to 50
(2) (3) (4)
fl *2 f2’5
-11.5 *25 -+3’5
, Over
50
l?O
(5)
f3.5
14.5
2.2.1 Deviations given in Tables 3 and 4 shall also be applicable to webs and ribs of castings.
2.3 Diameter and Rounding - For the outside and inside diameters as well as for roundings ( outside and inside radii ) the deviations given in Tables 1 and 2 shall apply.
6
IS : 8349 - -1977
( Continued from page 2 )
Members Representing SnRr P. R. JALAN Hindustan Malleables & Forgings Ltd. Bhuli SHRI RAVINLIRA SALVI Pearlitic Iron Castings & Engineering Works,
Bombay SHRI 3. B. SAXENA
SHRJ M. L. DHJR ( Alternate ) Minstry of Defence ( DGOF ), Calcutta
SHRI N. S. SWAhlINAMAN Tractors & Farm Equipment Ltd, Madras SHRJ K. KUNCHJTHAPATHAM ( Alternate )
SHRJ D. G. DODHJA Shah Malleable Castings Ltd, Thaoe