iSleep 22
iSleep 22 is an advanced high performance and sophisticated
Bi-level S device designed for OSA therapy at home. The
upright yet stable design takes a minimum space on the
nightstand and suites perfectly in any bedroom.
Thanks to eSync – our highly responsive Trigger technology – the iSleep 22 synchronizes smoothly with the patient’s breathing effort. As the patient demands for a new breath the iSleep 22 responds immediately and delivers the exact pressure required, allowing for very comfortable breathing. The backup-frequency takes over the patient’s breathing during intermittent central apneas.
The ‘truly’ integrated heated humidifier provides adjustable upper airway’s humidification for increased compliance. The enhanced user interface provides comprehensive information on therapeutic data yet allowing for easy use.
The memory card capability allows for quick and easy download of long-term patient compliance data and detailed log. The PC software does not only provide compliance reports but also the patients AHI and also features detailed view on flow, pressure and leakage data.
The design is adapted for use with a wide range of masks including the iMaskTM. The lightweight design and the built-in carrying handle make it easy to take with you when travelling. The power adapter enables operation in any corner of the world. It can even be powered from a car or recreational vehicle when enjoying an active everyday life.
• eSync, synchronized breath delivery
• Small footprint even with the integrated humidifier attached
• Adjustable settings for inspiratory trigger and automatic leakage-compensated expiratory trigger
• Fixed backup rate of 6 breaths per minute
• Enhanced User Interface yet extremely easy to use with big buttons
• Large backlit graphical display with built-in alarm clock
• Designed for travelling; world wide mains power compatibility and DC power options
• Designed for a wide range of masks
• Unique snooze function
• Comprehensive yet easy to use PC-software with remote control capability
• Detailed patient log
• Memory card capability
• Integrated AHI and leakage calculation
• Designed for Home
eSync inside
CORPORATE HEAD OFFICE Breas Medical AB. Företagsvägen 1, SE-435 33 Mölnlycke, Sweden Phone +46 31 86 88 00. Fax +46 31 86 88 10. [email protected]. www.breas.com.
Dec 2007
Technical Specifications iSleep 22
SETTINGS/PERFORMANCES
Ventilation modes
• CPAP • BiLevel
Devices modes • Clinical • Home
IPAP 4 to 20 cmH2O
EPAP 4 to 20 cmH2O
Inspiratory trigger (eSync) 1 to 9
Expiratory trigger Fixed
Breath rate Fixed, 6 BPM
Maximum flow > 125 litres/min at 1/3 of max pressure: 108 l/min at 2/3 of max pressure: 132 l/min at max pressure: 132 l/min
Maximum limited pressure during single fault condition 30 cmH2O
Breathing resistance under single fault condition 0.9 cmH2O at 30 l/min 3.2 cmH2O at 60 l/min
Digital output Yes
Sound level at 10 cmH2O Less than 28 dB(A)
INDICATIONS
Internal function failure Message on the display
Power failure indication Message on the display
POWER SUPPLY
Mains supply 100 to 240 V AC
External supply 12/24 V DC, 12 V adapter available
OPERATING CONDITIONS
Recommended leakage 20 to 40 l/min at 10 cmH2O
Minimum leakage 12 l/min at 4 cmH2O
DIMENSIONS
W x H x D 173 x 172 x 201 mm (with humidifier HA 01)
Weight 1,9 kg
Air outlet 22 mm conical standard connector
Breas Medical AB reserves the right to make changes to of this Product Specification without any prior notification. April 2007.