KEY FEATURES - SPARSHPET-TT is an optically clear transparent �lm with high clarity low haze, high gloss. The �lm possesses good Optical and surface properties along with excellent transparency and dimensional stability. Isotropic �lms are also Available with corona treated and chemical coated wound inside/ outside as per the customer requirment.APPLICATIONS - Suitable espcially in application of lidding for cups, trays and tubes .E.G. Yogurt, Ice cream, beverages, packaged food trays etc.
Disclaimer: The data sheet information is to the best of our knowledge and experience. Some values may be customized wherever possible, as per the customer's requirement. Sparsh Industries Pvt Ltd makes no warranty, whatsoever, to the product fitness for any specific use. Data sheet is purely for reader's consideration and verification for sale or contract.
Sparsh Industries Private Limited
Factory:G-12 to G-20, UPSIDC, Jainpur Industrial Area,Kanpur Dehat, 209311, Uttar Pradesh, India
Registered OfficeSparsh House, 165, Patparganj Industrial Area, Delhi-110092, INDIA
Tel: Fax: Email: Web:
+91 11 42655646/4747+91 11 [email protected] URS is a member of Registrar of Standards (Holidings) Ltd.
ISOTROPIC POLYESTER FILM (TT)
Untreated side
Untreated side
TECHNICAL DATA SHEET
MD TD
Co -efficient of
Fric�on
Sta�c
Dynamic
Haze (Max)
%
MD%
TD
Shrinkage
(COF)
@ 150 °C/30'ASTM -D 1204
Sparsh Method
Sparsh Method
ASTM -D 882
ASTM -D 882
Micron
M₂/Kg
Kg/cm 2
We�ng Tension (Min) Plain Side Dyne/cm
ASTM -D 1894
ASTM -D 2578
Kg/cm 2
%
%
Tensile Strength (MIN)
12 ±0.3 23 ±0.4 36 ±0.4
59.5 31.1 19.8
Tensile Strength +45°
Tensile Strength -45°
MD
TDElonga�on +45°
Elonga�on-45°
Tensile Strength +45°/-45°
Elonga�on +45° /-45°
Tensile Strength (MIN)
Elonga�on (MIN)
Elonga�on
Ra�o
20 00
19 00
2000
2200
100 ±10
90 ±10
100 ±10
90 ±10
0.75 - 1.2
0.70 - 1.4
20 00
19 00
2200
2300
100 ±10
90 ±10
100 ±10
90 ±10
0.75 - 1.2
0.70 - 1.4
2100
20 00
2200
2300
100 ±10
90 ±10
115 ±10
100 ±10
0.75 - 1.2
0.70 - 1.4
0.40 ±.05
0.30 ±.05
44
0.40 ±.05
0.30 ±.05
44
0.40 ±.05
0.30 ±.05
44
3.0 3.5 4.0
2.0±0.5 2.0±0.5 2.0±0.5
0.2±0.2 0.2±0.2 0.2±0.2
Proper�es UnitTest
Method Typical Values
General
Thickness
Yield
ASTM -D 882
ASTM -D 882
ASTM -D 882
ASTM D 1003-
