Dark Ghost Gray
Dark Gray
Dark Gull Gray
Flat Black
Gloss Black
Gloss White
Gray
Gray-Green
Gunship Gray
Olive Drab
Red
Silver
Steel
Tan
Yellow
If you have any questions or comments, call our hotline at: (800) 833-3570or, please write to:
Revell-Monogram Consumer Service Department, 725 Landwehr Road, Northbrook, Illinois 60062Be sure to include the plan number (85687800200), part number, description, your return address and phone number.
Visit our website: www.revell-monogram.com
AV-8B HARRIER KIT6878 85687800200
* REPEAT SEVERAL TIMES* A REPETER PLUSIEURS FOIS
* CEMENT TOGETHER* A COLLER
* ALTERNATIVE ASSEMBLY* ENSEMBLAGE ALTERNATIVE
* REMOVE AND THROW AWAY* A RETIRER ET JETER
* DO NOT CEMENT* NE PAS COLLER
* OPTIONAL PARTS* PIECES EN OPTION
* DECAL * DECAL COMANIE
REVELL-MONOGRAM, LLC Northbrook, IL. Copyright © 2003. All rights reserved.
The AV-8B Harrier traces its origins back to a British designed vertical take-off and landing (VTOL) aircraft. The first Harrier used by the U. S. Marine Corps was the AV-8A which entered service in the 1960s. The present AV-8B entered service in the mid-1980s, and it is a much larger and more powerful variant. The payload capability of the AV-8B is twice that of the earlier AV-8A. Capable of operating from amphibious assault ships or unim-proved forward areas without runways, AV-8Bs provide close air support to Marine forces on the ground. They can deliver a wide variety of con-ventional and precision guided weapons to include
the latest Joint Direct Attack Munitions (JDAM) and laser-guided bombs. For self defense, AIM-9M Sidewinder missiles provide the Harrier with a good air-to-air capability. AV-8Bs currently in operation with the Marine Corps include the AV-8B II+, which features an AN/APG-65 radar, and the Night Attack AV-8B. During Operation Iraqi Freedom, seventy Marine AV-8B II+ and Night Attack Harriers flew from assault ships and shore bases to help over-throw the regime of Saddam Hussein and liberate the people of Iraq.
Gris fantôme foncé
Gris foncé
Gris cendré foncé
Noir mat
Noir brilliant
Blanc brilliant
Gris
Vert-gris
Gris hélicoptère
Gris vert
Rouge
Argent
Acier
Havane
Jaune
This optional paint guide is provided if you choose to detail paint your model.
Ce guide de peinture vous sera fourni si vous choisis-sez de peindre votre modèle en détail.
* Study the assembly drawings.* Each plastic part is identified by a number.* In the assembly drawings, some parts will be
marked by a star (★) to indicate chrome plated plastic.
* For better paint and decal adhesion, wash the plastic parts in a mild detergent solution. Rinse and let air dry.
* Check the fit of each piece before cementing in place.
* Use only cement for polystyrene plastic.* Scrape plating and paint from areas
to be cemented.* Allow paint to dry thoroughly before
handling parts.* Any unused parts may be discarded.
DECAL APPLICATION INSTRUCTIONS
1. Cut desired decal from sheet.2. Dip decal in water for a few seconds.3. Place wet decal on paper towel.4. Wait until decal is movable on paper backing.5. Place decal in position on model, face up and
slide backing away.6. Press out air bubbles with a soft damp cloth.7. Milkiness that may appear is for better decal
adhesion and will dry clear. Wipe away any excess adhesive.
8. Do not touch decal until fully dry.9. Allow the decals 48 hours to dry before
applying clear coat.
NOTE: Decals are compatible with setting solutions or solvents.
READ THIS BEFORE YOU BEGIN LIRE CE QUI SUIT AVANT DE COMMENCER
* Etudier les schémas de montage.* Chaque pièce en plastique est identifiée par un numéro.* Sur les schémas de montage, certaines pièces sont
marquées d'une étoile (★) pour indiquer qu'elles sont en plastique chromé.
* Pour une meilleure prise de la peinture et des autocollants, laver les pièces en plastique avec une solution détergente peu concentrée. Les rincer et les laisser sécher à l'air.
* Vérifier que chaque pièce s'ajuste bien avant de la coller en place.
* N'utiliser que de la colle pour polystyrène.* Gratter les parties à coller pour enlever le chrome et la peinture.* Laisser la peinture bien sécher avant de manipuler les pièces.* Toute pièce inutilisée peut être jetée.
DIRECTIVES D'APPLICATION DES AUTOCOLLANTS
1. Découper l'autocollant désiré de la feuille.2. Tremper l'autocollant dans de l'eau pendant quelques secondes.3. Placer l'autocollant mouillé sur une serviette en papier.4. Attendez que l'autocollant puisse être déplacé sur son support
en papier.5. Mettre l'autocollant en position sur le modèle face sur
le dessus et faire glisser le support pour l'enlever.6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.7. La substance laiteuse qui peut apparaître est destinée à
améliorer l'adhésion de l'autocollant et devient incolore au séchage. Essuyer pour enlever tout excédent d'adhésif.
8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.9. Laisser l'autocollant sécher pendant 48 heures avant
d'appliquer une couche transparente.
REMARQUE: Les autocollants sont compatibles avec les solutions de fixage ou les solvants.
Interc
opy
COCKPIT AND FUSELAGE ASSEMBLY1
1FUSELAGE
HALF
2FUSELAGE
HALF
RESIN NIGHT ATTACK NOSE
7COCKPITINTERIOR
DARK GULL GRAY
25WHEEL WELL
HALFGLOSS WHITE
26WHEEL WELL
HALFGLOSS WHITE
10SEATSIDE
FLAT BLACK
9SEATSIDE
FLAT BLACK
74CONTROL
STICKDARK GULL
GRAY
FLAT BLACK
FLAT BLACK
FLAT BLACK
FLAT BLACK
A B
C
F G H
I
D E
75THROTTLEFLAT BLACK
8FENCE WELLGLOSS WHITE
STEEL
17BRAKE WELL
GLOSS WHITE
15COMPRESSOR
FAN
20MAIN
GEAR STRUTGLOSS WHITE
FLAT BLACK
OLIVE DRAB
OLIVE DRAB
OLIVE DRAB
FLAT BLACK
YELLOW
DARK GULL GRAY
DARK GULL GRAY INTERIOR
NOTE: USE RESIN NOSE FOR NIGHT ATTACK VERSION OF VMA-211. USE THE STANDARD NOSE FOR
AIRCRAFT OF VMA-311
NOTE: USE RESIN NOSE FOR NIGHT ATTACK VERSION OF VMA-211. USE THE STANDARD NOSE FOR
AIRCRAFT OF VMA-311
J
CUT OFFFOR
VMA-211 NIGHT
ATTACK VERSION
NOSE
1
4
Interc
opy
ENGINE ASSEMBLY 2
NOSE AND MAIN WHEEL ASSEMBLY 3
19MAIN WHEEL
HALFFLAT BLACK
21NOSE GEAR STRUT HALFGLOSS WHITE
11INTAKE
12INTAKE
13INLETDOOR
13INLETDOOR
22NOSE GEAR STRUT HALFGLOSS WHITE
18MAIN WHEEL
HALFFLAT BLACKGLOSS WHITE GLOSS WHITE
GLOSS WHITE
18MAIN WHEEL
HALFFLAT BLACK
23NOSE WHEEL
HALFFLAT BLACK
19MAIN WHEEL
HALFFLAT BLACK
35BLAST SHIELD
BURNT STEEL
36BLAST
SHIELDBURNT STEEL
34NOZZLE HALF
STEEL
56FUEL VENT
55ENGINE VENT
4STABILIZER
3STABILIZER
14AIR
TEMPERATURE PROBE
33NOZZLE HALF
STEEL
31NOZZLE HALF
STEEL
32NOZZLE HALF
STEEL
REPEAT FOR OTHER SIDE
Interc
opy
FUSELAGE AND GUN PACK ASSEMBLY 4
WING AND DROP TANK ASSEMBLY 5
45LIFT FENCEGLOSS WHITE
5WING TOP
90FIN
39DROP
TANK HALF
38DROP
TANK HALF
37DROP
TANK HALF
40DROP
TANK HALF
90FIN
6WING
BOTTOM
16SPEED BRAKE
GLOSS WHITE
79BRAKE
CYLINDERGLOSS WHITE
76FUSELAGE
STRAKEGRAY
29GUN PACK
HALF
30GUN PACK
HALF
27AMMO PACK
HALF
28AMMO PACK
HALF
77FUSELAGE
STRAKEGRAY
GLOSS WHITE
SILVER
GLOSS WHITE
RIGHT
LEFT
Interc
opy
BOMB ASSEMBLY6
MISSILE ASSEMBLY7
42INNER PYLON
GRAY
41INNER PYLON
GRAY
44OUTERPYLON
GRAY
58FIN
LIGHT GRAY
58FIN
LIGHT GRAY
43OUTERPYLON
GRAY
57SIDEWINDER
LIGHT GRAY
STEEL
STEEL
STEEL
BLACK
YELLOW
YELLOW
61BOMB HALF
OLIVE DRAB
60BOMB HALF
OLIVE DRAB
YELLOW
61BOMB HALF
OLIVE DRAB
60BOMB HALF
OLIVE DRABSTEEL
NOTE: SEE PAINTING INSTRUC-TIONS AT THE END OF THIS
BOOKLET FOR INFORMATION ON HOW TO PAINT THE MISSILES
AND WHERE TO APPLY DECALS
Interc
opy
FINAL ASSEMBLY 8
CANOPY ASSEMBLY 981
CANOPYCLEAR
83MIRRORSFLAT BLACK
(PAINT MIRROR FACE SILVER
83MIRROR
FLAT BLACK(PAINT MIRROR FACE SILVER
TAN
70CANOPY FRAME
CLEAR
A
B
C D
46OUTRIGGER
GEAR
47OUTRIGGER
GEAR
78REFUELING
PROBE
52AIR SCOOPS
48GEAR
COVER
49GEAR
COVER
FLAT BLACK
FLAT BLACK
FLAT BLACK
GLOSS WHITE(PAINT OLEO
PORTION SILVER)
GLOSS WHITE(PAINT OLEO POR-
TION SILVER)
84NOSE LENS
CLEAR
73INSTRUMENT
PANELFLAT BLACK
80WINDSHIELD
CLEAR
54PITOT TUBE
STEEL
54PITOT TUBE
STEEL
93YAW
INDICATORSTEEL
82HEAD UP DISPLAY
FLAT BLACK
FLAT BLACK
GRAY-GREEN
GLOSS WHITE
GRAY-GREEN
TAN
DARK GREEN
OLIVE GREEN
OLIVE GREEN
OLIVE DRAB
71PILOT
72PILOTS
ARM
STEEL(NOZZLE)
NOTE: USE WATER BASED WHITE GLUE TO ATTACH CLEAR
CLOSED
OPEN
2 3
PAINTING NOTE:GLOSS BLACK
INSTRUMENTS WITH WHITE DETAILS AND SILVER SWITCHESInt
ercop
y
DECAL PLACEMENT10
Interc
opy
85687800200
DECAL PLACEMENT CONTINUED10
Interc
opy