Download - KPI Difference Between RAN12.0 and RAN10
KPI Difference Between RAN12.0and RAN10.0
Issue 01
Date 2009-12-25
HUAWEI TECHNOLOGIES CO., LTD.
Copyright © Huawei Technologies Co., Ltd. 2009. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China
Website: http://www.huawei.com
Email: [email protected]
Issue 01 (2009-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
iii
KPI Difference Between RAN12.0 and RAN10.0 Contents
Issue 01 (2009-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
v
Contents
1 KPI Addition...............................................................................................................................1-1 1.1 E-FACH RAB Setup Success Ratio (Cell) ....................................................................................................1-1 1.2 EFACH Traffic Volume.................................................................................................................................1-1 1.3 CS over HSPA RAB Setup Success Ratio.....................................................................................................1-2 1.4 Cell Unavailability duration ..........................................................................................................................1-2 1.5 HSDPA Unavailability duration ....................................................................................................................1-3 1.6 HSUPA Unavailability duration ....................................................................................................................1-3 1.7 Inter-frequency Hard Handover Success Ratio (H2D)..................................................................................1-4 1.8 PS Radio Access Success Ratio (Cell) ..........................................................................................................1-4 1.9 CS Radio Access Success Ratio (Cell)..........................................................................................................1-5 1.10 CS RAB Setup Success Ratio (RNC)..........................................................................................................1-5 1.11 PS RAB Setup Success Ratio (RNC) ..........................................................................................................1-6 1.12 HSDPA 64QAM RAB Setup Success Ratio................................................................................................1-6 1.13 HSDPA MIMO RAB Setup Success Ratio..................................................................................................1-7 1.14 HSDPA DC RAB Setup Success Ratio .......................................................................................................1-7 1.15 HSDPA MIMO64QAM RAB Setup Success Ratio ....................................................................................1-8 1.16 Mean Number of MBMS Users ..................................................................................................................1-8 1.17 Mean Number of HSDPA Users..................................................................................................................1-9 1.18 Mean Number of HSUPA Users..................................................................................................................1-9 1.19 Mean Number of E-FACH Users ..............................................................................................................1-10 1.20 Mean Number of Users for CS Over HSPA ..............................................................................................1-10 1.21 Mean Number of Users for HSDPA 64QAM............................................................................................1-11 1.22 Mean Number of Users for HSDPA MIMO..............................................................................................1-11 1.23 Mean Number of Users for HSDPA MIMO64QAM.................................................................................1-12 1.24 Mean Number of users for HSUPA 16QAM.............................................................................................1-12 1.25 PS Service Drop Ratio (RNC)...................................................................................................................1-13
2 KPI Modification........................................................................................................................2-1 2.1 Counter names were changed........................................................................................................................2-1
2.1.1 Radio Access Success Ratio (Cell) ......................................................................................................2-1 2.1.2 RRC Setup Success Ratio (Cell.Service) .............................................................................................2-1 2.1.3 AMR RAB Setup Success Ratio (Cell) ................................................................................................2-2 2.1.4 PS RAB Setup Success Ratio (Cell) ....................................................................................................2-2
Contents KPI Difference Between RAN12.0 and RAN10.0
vi Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
Issue 01 (2009-12-25)
2.1.5 Congested Cell Ratio ...........................................................................................................................2-3 2.1.6 Soft Handover Overhead (RNC)..........................................................................................................2-3 2.1.7 Soft Handover Success Ratio (RNC) ...................................................................................................2-3 2.1.8 Soft Handover Success Ratio (Cell).....................................................................................................2-4 2.1.9 Softer Handover Success Ratio (RNC) ................................................................................................2-4 2.1.10 Softer Handover Success Ratio (Cell)................................................................................................2-4 2.1.11 Service Cell Change Success Ratio with SHO (H2H) .......................................................................2-5 2.1.12 H2D Channel Handover Success Ratio..............................................................................................2-5 2.1.13 D2H Channel Handover Success Ratio..............................................................................................2-5 2.1.14 Intra-frequency Hard Handover Success Ratio (RNC) ......................................................................2-5 2.1.15 Intra-frequency Hard Handover Success Ratio (H2H).......................................................................2-6 2.1.16 Inter-frequency Hard Handover Success Ratio (RNC) ......................................................................2-6 2.1.17 Inter-frequency Hard Handover Success Ratio (Cell)........................................................................2-6 2.1.18 Inter-frequency Hard Handover Success Ratio (H2H).......................................................................2-7 2.1.19 CS W2G Inter-RAT Handover Out Success Ratio (RNC) .................................................................2-7 2.1.20 PS W2G Inter-RAT Handover Out Success Ratio (RNC)..................................................................2-7 2.1.21 SRNC Relocation Success Ratio........................................................................................................2-7 2.1.22 TRNC Relocation Success Ratio........................................................................................................2-8 2.1.23 E-DCH Soft Handover Success Ratio................................................................................................2-8 2.1.24 E-DCH Service Cell Change Success Ratio with SHO .....................................................................2-9 2.1.25 E-DCH Service Cell Change Success Ratio with Inter-HHO ............................................................2-9 2.1.26 E2D Channel Handover Success Ratio ..............................................................................................2-9 2.1.27 D2E Channel Handover Success Ratio ..............................................................................................2-9 2.1.28 E-DCH to DCH Handover Success Ratio (with Inter HHO) ...........................................................2-10 2.1.29 HSUPA W2G Inter-RAT Handover Out Success Ratio....................................................................2-10 2.1.30 AMR Call Drop Ratio ......................................................................................................................2-10 2.1.31 VP Call Drop Ratio ..........................................................................................................................2-11 2.1.32 HSUPA Service Drop Ratio .............................................................................................................2-11
2.2 Counters were changed ...............................................................................................................................2-11 2.2.1 Average CPU Load.............................................................................................................................2-11 2.2.2 CS Service Drop Ratio.......................................................................................................................2-12 2.2.3 Average UL BLER for CS Service.....................................................................................................2-12 2.2.4 Mean Number of CS Users (RNC) ....................................................................................................2-12 2.2.5 Mean Number of CS Users (Cell) ......................................................................................................2-13 2.2.6 UL Traffic Volume of QoS Classes ....................................................................................................2-13 2.2.7 DL Traffic Volume of QoS Classes ....................................................................................................2-14 2.2.8 MBMS Service Throughput...............................................................................................................2-15 2.2.9 Radio Network Unavailability ...........................................................................................................2-15 2.2.10 HSDPA Service Drop Ratio .............................................................................................................2-16
2.3 The formula was changed............................................................................................................................2-16 2.3.1 AMR Traffic Drop Ratio (RNC) ........................................................................................................2-16 2.3.2 AMR Traffic Drop Ratio (Cell)..........................................................................................................2-16
KPI Difference Between RAN12.0 and RAN10.0 Contents
Issue 01 (2009-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
vii
2.3.3 VP Traffic Drop Ratio (RNC) ............................................................................................................2-17 2.3.4 VP Traffic Drop Ratio (Cell)..............................................................................................................2-17
3 KPI Deletion ...............................................................................................................................3-1 3.1 DL RLC Average Retransmission Ratio........................................................................................................3-1 3.2 MBMS Service Channel Number..................................................................................................................3-1
KPI Difference Between RAN12.0 and RAN10.0
Issue 01 (2009-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
ix
Keywords
RAN, KPI, Performance Management
Abstract
The purpose of this document is given a list of the RAN KPI definition difference between RAN12.0 and RAN10.0, the difference types including addition, modification and deletion.
List of abbreviations:
Abbreviation Full Spelling
PM Performance Management
KPI Key Performance Indicator
RAN Radio Access Network
HSDPA High Speed Downlink Packet Access
HSDSCH High Speed Downlink shared channel
RAT Radio Access Technology
E-FACH Enhance-Forward Access Channel
DC Dual Cell
MIMO Multiple Input Multiple Output
KPI Difference Between RAN12.0 and RAN10.0 1 KPI Addition
Issue 01 (2009-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
1-1
1 KPI Addition
1.1 E-FACH RAB Setup Success Ratio (Cell) E-FACH RAB Setup Success Ratio KPI Name
CELL Measurement Scope
E-FACH RAB Setup Success Ratio=(Successful PS RAB Setup on Formula E-FACH /Attempts of PS RAB Setup on E-FACH )*100%
Associated Counters
E-FACH RAB Setup Success Ratio=(VS.RAB.SuccEstPS.EFACH/VS.RAB.AttEstPS.EFACH)*100%
Notes The RNC level KPI is calculated by aggregating all the cell counters.
Change reason: New feature evaluating
1.2 EFACH Traffic Volume
Impact: None
KPI Name E-FACH Traffic Volume
CELL Measurement Scope
Number of Downlink MAC PDU Bytes for traffic on the E-FACH over ce
Formula the Iub Interfa
Associated Counters
VS.CRNCIubBytesEFACH.Tx
Notes Unit: byte
Change reason:New feature evaluating
1 KPI Addition KPI Difference Between RAN12.0 and RAN10.0
1-2 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
Issue 01 (2009-12-25)
Impact: None
1.3 CS over HSPA RAB Setup Success Ratio CS over HSPA RAB Setup Success Ratio KPI Name
This KPI can be used to evaluate the RAB setup success ratio of the CS over HSPA service in a RNC or a cluster.
Description
CS over HSPA RAB Setup Success Ratio=(CS over HSPA RAB Setup Success/CS over HSPA RAB Setup Attempt)*100%
Formula
Associated Counters ab
.CS.Conv)*100%
CS over HSPA RAB Setup Success Ratio=(VS.HSPA.RAB.SuccEstab.CS.Conv/VS.HSPA.RAB.AttEst
Notes The RNC level KPI is calculated by aggregating all the cell counters.
Change reason:New feature evaluating
1.4 Cell Unavailability duration
Impact: None
Cell Unavailability duration KPI Name
This KPI can be used to evaluate accumulated unavailability duration of ult in a measurement period
Description the cell caused by system fa
Formula unavailability duration of a cell caused by system fault in the RNC
Associated Counters
ailTime.SysVS.Cell.Unav
Notes Unit: s
Change reason:Updates for Cell evaluating
Impact: None
KPI Difference Between RAN12.0 and RAN10.0 1 KPI Addition
Issue 01 (2009-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
1-3
1.5 HSDPA Unavailability duration KPI Name HSDPA Unavailability duration
This KPI can be used to evaluate accumulated the HSDPA service unavailability duration of the cell caused by system fault in a measurement period.
Description
HSDPA service unavailability duration of a cell caused by system fault in the RNC.
Formula
VS.Hsdpa.UnavailTimeAssociated Counters
Unit: s Notes
Change reason:Updates for Cell evaluating
Impact: None
1.6 HSUPA Unavailability duration KPI Name HSUPA Unavailability duration
CELL Measurement Scope
HSUPA service unavailability duration of a cell caused by system fault in the RNC
Formula
VS.Cell.HSUPA.UnavailTime Associated Counters
Unit: s Notes
Change reason:Updates for Cell evaluating
Impact: None
1 KPI Addition KPI Difference Between RAN12.0 and RAN10.0
1-4 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
Issue 01 (2009-12-25)
1.7 Inter-frequency Hard Handover Success Ratio (H2D) KPI Name Inter-frequency Hard Handover Success Ratio (H2D)
CELL Measurement Scope
Inter-frequency Hard Handover Success Ratio (H2H)=(H2H Inter-frequency Hard Handover Success/H2H Inter-frequency Hard Handover Attempt)*100%
Formula
Inter-frequency Hard Handover Success Ratio (H2D)=(VS.HSDPA.HHO.H2D.SuccOutInterFreq/VS.HSDPA.HHO.H2D.AttOutInterFreq)*100%
Associated Counters
None Notes
Change reason:Updates for HSDPA evaluating
Impact: None
1.8 PS Radio Access Success Ratio (Cell) KPI Name PS Radio Access Success Ratio (Cell)
CELL Measurement Scope
PS Radio Access Success Ratio (Cell) =PS RRC Setup Success Ratio(Cell)*PS RAB Setup Success Ratio(Cell)*100%
Formula
Associated Counters
PS Radio Access Success Ratio (Cell)= [(RRC.SuccConnEstab.OrgBkgCall+RRC.SuccConnEstab.OrgItrCall+ RRC.SuccConnEstab.TmBkgCall+ RRC.SuccConnEstab.TmItrCall)/(RRC.AttConnEstab.OrgBkgCall+ RRC.AttConnEstab.OrgInterCall+ RRC.AttConnEstab.TmBkgCall+RRC.AttConnEstab.TmInterCall)]*PS RAB Setup Success Ratio (Cell)*100%
None Notes
Change reason:Updates for KPI evaluating
Impact: None
KPI Difference Between RAN12.0 and RAN10.0 1 KPI Addition
Issue 01 (2009-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
1-5
1.9 CS Radio Access Success Ratio (Cell) KPI Name CS Radio Access Success Ratio (Cell)
CELL Measurement Scope
CS Radio Access Success Ratio (Cell) =CS RRC Setup Success Ratio(Cell)*CS RAB Setup Success Ratio(Cell)*100%
Formula
Associated Counters
CS Radio Access Success Ratio (Cell) =[(RRC.SuccConnEstab.OrgConvCall+ RRC.SuccConnEstab.TmConvCall+RRC.SuccConnEstab.EmgCall)/ (RRC.AttConnEstab.OrgConvCall+RRC.AttConnEstab.TmConvCall)+ RRC.AttConnEstab.EmgCall)]*CS RAB Setup Success Ratio (Cell)*100%
Notes The RNC level KPI is calculated as follows: [(RRC.SuccConnEstab.OrgConvCall+RRC.SuccConnEstab.TmConvCall+RRC.SuccConnEstab.EmgCall)/ (RRC.AttConnEstab.OrgConvCall+ RRC.AttConnEstab.TmConvCall+ RRC.AttConnEstab.EmgCall)]*CS RAB Setup Success Ratio (RNC)*100%
Change reason:Updates for KPI evaluating
Impact: None
1.10 CS RAB Setup Success Ratio (RNC) KPI Name CS RAB Setup Success Ratio (RNC)
RNC Measurement Scope
CS RAB Setup Success Ratio=(CS RAB Setup Success/CS RAB Setup Attempt)*100%
Formula
CS RAB Setup Success Ratio (RNC)=[(VS.RAB.SuccEstabCS.Conv.RNC+VS.RAB.SuccEstabCS.Str.RNC)/(VS.RAB.AttEstabCS.Conv.RNC+VS.RAB.AttEstabCS.Str.RNC)]*100%
Associated Counters
None Notes
1 KPI Addition KPI Difference Between RAN12.0 and RAN10.0
1-6 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
Issue 01 (2009-12-25)
Change reason:Updates for KPI evaluating
Impact: None
1.11 PS RAB Setup Success Ratio (RNC) KPI Name PS RAB Setup Success Ratio (RNC)
RNC Measurement Scope
Formula PS RAB Setup Success Ratio (RNC)=(PS RAB Setup Success/ PS RAB Setup Attempt)*100%
Associated Counters
PS RAB Setup Success Ratio (RNC)=[(VS.RAB.SuccEstabPS.Bkg.RNC+VS.RAB.SuccEstabPS.Str.RNC+ VS.RAB.SuccEstabPS.Conv.RNC+VS.RAB.SuccEstabPS.Int.RNC) /(VS.RAB.AttEstabPS.Conv.RNC+VS.RAB.AttEstabPS.Bkg.RNC+ VS.RAB.AttEstabPS.Int.RNC+VS.RAB.AttEstabPS.Str.RNC)]*100%
None Notes
Change reason:Updates for KPI evaluating
Impact: None
1.12 HSDPA 64QAM RAB Setup Success Ratio KPI Name HSDPA 64QAM RAB Setup Success Ratio
CELL Measurement Scope
HSDPA 64QAM RAB Setup Success Ratio=(HSDPA 64QAM RAB Setup Success/HSDPA 64QAM RAB Setup Attempt)*100%
Formula
Associated Counters
HSDPA 64QAM RAB Setup Success Ratio=(VS.HSDPA.RAB.64QAM.SuccEstab /VS.HSDPA.RAB.64QAM.AttEstab)*100%
The RNC level KPI is calculated by aggregating all the cell counters Notes
Change reason: New feature evaluating
Impact: None
KPI Difference Between RAN12.0 and RAN10.0 1 KPI Addition
Issue 01 (2009-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
1-7
1.13 HSDPA MIMO RAB Setup Success Ratio KPI Name HSDPA MIMO RAB Setup Success Ratio
CELL Measurement Scope
HSDPA MIMO RAB Setup Success Ratio=(HSDPA MIMO RAB Setup Success/HSDPA MIMO RAB Setup Attempt)*100%
Formula
Associated Counters
HSDPA MIMO RAB Setup Success Ratio=(VS.HSDPA.RAB.MIMO.SuccEstab /VS.HSDPA.RAB.MIMO.AttEstab)*100%
The RNC level KPI is calculated by aggregating all the cell counters Notes
Change reason: New feature evaluating
Impact: None
1.14 HSDPA DC RAB Setup Success Ratio KPI Name HSDPA DC RAB Setup Success Ratio
CELL Measurement Scope
HSDPA DC RAB Setup Success Ratio=(HSDPA DC RAB Setup Success/HSDPA DC RAB Setup Attempt)*100%
Formula
HSDPA DC RAB Setup Success Ratio=(VS.HSDPA.RAB.DC.SuccEstab/VS.HSDPA.RAB.DC.AttEstab)*100%
Associated Counters
The RNC level KPI is calculated by aggregating all the cell counters. Notes
Change reason: New feature evaluating
Impact: None
1 KPI Addition KPI Difference Between RAN12.0 and RAN10.0
1-8 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
Issue 01 (2009-12-25)
1.15 HSDPA MIMO64QAM RAB Setup Success Ratio KPI Name HSDPA MIMO64QAM RAB Setup Success Ratio
CELL Measurement Scope
HSDPA MIMO64QAM RAB Setup Success Ratio=(HSDPA MIMO64QAM RAB Setup Success/HSDPA MIMO64QAM RAB Setup Attempt)*100%
Formula
HSDPA MIMO64QAM RAB Setup Success Ratio=(VS.HSDPA.RAB.MIMO64QAM.SuccEstab/VS.HSDPA.RAB.MIMO64QAM.AttEstab)*100%
Associated Counters
The RNC level KPI is calculated by aggregating all the cell counters. Notes
Change reason: New feature evaluating
Impact: None
1.16 Mean Number of MBMS Users KPI Name Mean Number of MBMS Users
CELL Measurement Scope
Formula Mean number of MBMS users in PTP channel in a cell Mean number of MBMS users in PTM channel in a cell
Associated Counters
VS.MBMS.PTP.UE.Channel0.Mean.Cell; VS.MBMS.PTM.UE.Channel0.Mean.Cell; VS.MBMS.PTP.UE.Channel1.Mean.Cell; VS.MBMS.PTM.UE.Channel1.Mean.Cell; VS.MBMS.PTP.UE.Channel2.Mean.Cell; VS.MBMS.PTM.UE.Channel2.Mean.Cell; VS.MBMS.PTP.UE.Channel3.Mean.Cell; VS.MBMS.PTM.UE.Channel3.Mean.Cell; VS.MBMS.PTP.UE.Channel4.Mean.Cell; VS.MBMS.PTM.UE.Channel4.Mean.Cell
None Notes
Change reason:Updates for MBMS evaluating
Impact: None
KPI Difference Between RAN12.0 and RAN10.0 1 KPI Addition
Issue 01 (2009-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
1-9
1.17 Mean Number of HSDPA Users KPI Name Mean Number of HSDPA Users
CELL Measurement Scope
Mean Number of HSDPA Users in a Cell Formula
VS.HSDPA.UE.Mean.CellAssociated Counters
The KPI should be collected at busy hour. Notes
Change reason: Updates for KPI evaluating
Impact: None
1.18 Mean Number of HSUPA Users KPI Name Mean Number of HSUPA Users
CELL Measurement Scope
Mean Number of HSUPA Users in a cell Formula
VS.HSUPA.UE.Mean.CellAssociated Counters
The KPI should be collected at busy hour. Notes
Change reason: Updates for KPI evaluating
Impact: None
1 KPI Addition KPI Difference Between RAN12.0 and RAN10.0
1-10 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
Issue 01 (2009-12-25)
1.19 Mean Number of E-FACH Users KPI Name Mean Number of E-FACH Users
CELL Measurement Scope
Mean Number of Users that in cell E-FACH state Formula
VS.EFACHUEs Associated Counters
The KPI should be collected at busy hour. Notes
Change reason:New feature evaluating
Impact: None
1.20 Mean Number of Users for CS Over HSPA KPI Name Mean Number of Users for CS Over HSPA
CELL Measurement Scope
Mean Number of Users for CS Over HSPA in a cell. Formula
VS.HSPA.UE.Mean.CS.Conv.Cell Associated Counters
The KPI should be collected at busy hour. Notes
Change reason:New feature evaluating
Impact: None
KPI Difference Between RAN12.0 and RAN10.0 1 KPI Addition
Issue 01 (2009-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
1-11
1.21 Mean Number of Users for HSDPA 64QAM KPI Name Mean Number of Users for HSDPA 64QAM
CELL Measurement Scope
Mean Number of Users for HSDPA 64QAM in a cell. Formula
VS.HSDPA.64QAM.UE.Mean.CellAssociated Counters
The KPI should be collected at busy hour. Notes
Change reason: New feature evaluating
Impact: None
1.22 Mean Number of Users for HSDPA MIMO KPI Name Mean Number of Users for HSDPA MIMO
CELL Measurement Scope
Mean Number of Users for HSDPA MIMO in a cell. Formula
VS.HSDPA.MIMO.UE.Mean.CellAssociated Counters
The KPI should be collected at busy hour. Notes
Change reason: New feature evaluating
Impact: None
1 KPI Addition KPI Difference Between RAN12.0 and RAN10.0
1-12 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
Issue 01 (2009-12-25)
1.23 Mean Number of Users for HSDPA MIMO64QAM KPI Name Mean Number of Users for HSDPA MIMO64QAM
CELL Measurement Scope
Mean Number of Users for HSDPA MIMO64QAM in a cell. Formula
VS.HSDPA.MIMO64QAM.UE.Mean.CellAssociated Counters
The KPI should be collected at busy hour. Notes
Change reason: New feature evaluating
Impact: None
1.24 Mean Number of users for HSUPA 16QAM KPI Name Mean Number of users for HSUPA 16QAM
CELL Measurement Scope
Mean Number of users for HSUPA 16QAM in a cell. Formula
VS.HSUPA.16QAM.UE.Mean.CellAssociated Counters
The KPI should be collected at busy hour. Notes
Change reason: New feature evaluating
Impact: None
KPI Difference Between RAN12.0 and RAN10.0 1 KPI Addition
Issue 01 (2009-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
1-13
1.25 PS Service Drop Ratio (RNC) KPI Name PS Service Drop Ratio (RNC)
CELL Measurement Scope
PS Service Drop Ratio (RNC)=(PS RAB Abnormal Release/PS RAB Release)*100%
Formula
Associated Counters
PS Service Drop Ratio (RNC)=[VS.RAB.AbnormRel.PS.RNC/(VS.RAB.AbnormRel.PS.RNC+VS.RAB.NormRel.PS.RNC)]*100%
None Notes
Change reason: Updates for KPI evaluating
Impact: None
KPI Difference Between RAN12.0 and RAN10.0 2 KPI Modification
Issue 01 (2009-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
2-1
2 KPI Modification
2.1 Counter names were changed 2.1.1 Radio Access Success Ratio (Cell)
vice)*{[(VS.RAB.SuccEstabCS.Conv+VS.RAB.SuccEstabCS.Str)+(VS.RAB.SuccEPS.Conv+VS.RAB.SuccEstabPS.Str+VS.RAB.SuccEstabPS.Inter+VS.RAB.SuccEstabP
+VS.RAB.AttEstabCS.Str)+(VS.RAB.AttEstabPS.ConvAttEstabPS.Inter+VS.RAB.AttEstabPS.Bkg]}*100%
(Cell.Service)*{[(VS.RAB.SuccEstabCS.Conv+VS.RAB.SuccEstabCS.Str)+(VS.RAB.SuccEstabPS.Int+VS.RAB.SuccEstabPS.
ttEstabCS.Conv+VS.RAB.AttEstabCS.Str)+(VS.RAB.AttEstabPS.Conv+tr+VS.RAB.AttEstabPS.Int+VS.RAB.AttEstabPS.Bkg]}*100%
None.
2.1.2 RRC S .Service)
.AttConnEstab.TmConvCall+RRC.AttConnEstab.TmStrCall+RRC.AttConnEstab.TmInterCall+RRC.AttCon
tab.TmBkgCall+RRC.AttConnEstab.EmgCall+RRC.AttConnEstab.Unknown+RRC.AttC
From
Radio Access Success Ratio (Cell)
=RRC Setup Success Ratio (Cell.SerstabS.Bkg)]/[(VS.RAB.AttEstabCS.Conv+VS.RAB.AttEstabPS.Str+VS.RAB.
To
Radio Access Success Ratio (Cell)
=RRC Setup Success Ratio
stabPS.Conv+VS.RAB.SuccEstabPS.Str+VS.RAB.SuccEBkg)]/[(VS.RAB.AVS.RAB.AttEstabPS.S
Change reason:Several counter names were changed.
Impact:
etup Success Ratio (CellFrom
RRC Setup Success Ratio (Cell.Service)
=[(RRC.SuccConnEstab.OgConvCall+RRC.SuccConnEstab.OrgStrCall+RRC.SuccConnEstab.OrgItrCall+RRC.SuccConnEstab.OrgBkgCall+RRC.SuccConnEstab.OrgSubCall+RRC.SuccConnEstab.TmConvCall+RRC.SuccConnEstab.TmStrCall+RRC.SuccConnEstab.TmItrCall+RRC.SuccConnEstab.TmBkgCall+RRC.SuccConnEstab.EmgCall+RRC.SuccConnEstab.Unkown+RRC.SuccConnEstab.OgHhPrSig+RRC.SuccConnEstab.OgLwPrSig+RRC.SuccConnEstab.CallReEst+RRC.SuccConnEstab.TmHhPrSig+RRC.SuccConnEstab.TmLwPrSig)/(RRC.AttConnEstab.OrgConvCall+RRC.AttConnEstab.OrgStrCall+RRC.AttConnEstab.OrgInterCall+RRC.AttConnEstab.OrgBkgCall+RRC.AttConnEstab.OgSubCall+RRC
nEs
2 KPI Modification KPI Difference Between RAN12.0 and RAN10.0
2-2 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
Issue 01 (2009-12-25)
onnEstab.OgHhPrSig+RRC.AttConnEstab.OgLwPrSig+RRC.AttConnEstab.CallReEst+RR
RRC.AttConnEstttConnEstab.TmInterCall+RRC.AttC
ConnEstab.Unknown+RRC.AttPrSig+RRC.AttConnEstab.OrgLwPrSig+RRC.AttConnEstab.CallReEst+
RRC.AttConnEstab.TmHhPrSig+RRC.AttConnEstab.TmLwPrSig)]*100%
None.
2.1.3 AMR RAB Setup Success Ratio (Cell) m
AMR RAB Setup Success Ratio (Cell)
=(VS.RAB.SuccEstabCS.AMR/VS.RAB.AttEstab.AMR)*100%
.
None.
2.1.4 PS RAB Setup Success Ratio (Cell)
+VS.RAB.SuccEstabPS.Str+VS.RAB.SuccEstabPS.Inter+VSttEstabPS.Conv+VS.RAB.AttEstabPS.Str+VS.RAB.Att
tr+VS.RAB.SuccEstabPS.Int+VS..Bkg)/(VS.RAB.AttEstabPS.Conv+VS.RAB.AttEstabPS.Str+VS.RAB.Att
EstabPS.Int+VS.RAB.AttEstabPS.Bkg)]*100%
Change reason:Several counter names were changed.
C.AttConnEstab.TmHhPrSig+RRC.AttConnEstab.TmLwPrSig)]*100%
To
RRC Setup Success Ratio (Cell.Service)
=[(RRC.SuccConnEstab.OrgConvCall+RRC.SuccConnEstab.OrgStrCall+RRC.SuccConnEstab.OrgItrCall+RRC.SuccConnEstab.OrgBkgCall+RRC.SuccConnEstab.OrgSubCall+RRC.SuccConnEstab.TmConvCall+RRC.SuccConnEstab.TmStrCall+RRC.SuccConnEstab.TmItrCall+RRC.SuccConnEstab.TmBkgCall+RRC.SuccConnEstab.EmgCall+RRC.SuccConnEstab.Unkown+RRC.SuccConnEstab.OrgHhPrSig+RRC.SuccConnEstab.OrgLwPrSig+RRC.SuccConnEstab.CallReEst+RRC.SuccConnEstab.TmHhPrSig+RRC.SuccConnEstab.TmLwPrSig)/(RRC.AttConnEstab.OrgConvCall+RRC.AttConnEstab.OrgStrCall+RRC.AttConnEstab.OrgInterCall+RRC.AttConnEstab.OrgBkgCall+RRC.AttConnEstab.OrgSubCall+ab.TmConvCall+RRC.AttConnEstab.TmStrCall+RRC.AonnEstab.TmBkgCall+RRC.AttConnEstab.EmgCall+RRC.AttConnEstab.OrgHh
Change reason:Several counter names were changed.
Impact:
Fro
AMR RAB Setup Success Ratio (Cell)
=(VS.RAB.SuccEstab.AMR/VS.RAB.AttEstab.AMR)*100%
To
Change reason:The counter name was changed
Impact:
From
PS RAB Setup Success Ratio (Cell)
=[(VS.RAB.SuccEstabPS.Conv.RAB.SuccEstabPS.Bkg)/(VS.RAB.AEstabPS.Inter+VS.RAB.AttEstabPS.Bkg)]*100%
To
PS RAB Setup Success Ratio (Cell)
=[(VS.RAB.SuccEstabPS.Conv+VS.RAB.SuccEstabPS.SRAB.SuccEstabPS
KPI Difference Between RAN12.0 and RAN10.0 2 KPI Modification
Issue 01 (2009-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
2-3
Impact: None.
2.1.5 Conge ell Ratio
=(The Number Of Cells,In Which VS.LCC.OverCongNumUL>0 or LCC.OverCongNumDL>0 On Busy Hour/The Total Number Of Cells In RNC)*100%
=(The Number Of Cells,In Which VS.LCC.OLC.UL.Num>0 or VS.LCC.OLC.DL.Num>0 )*100%
unter names were changed.
2.1.6 Soft Handover Overhead (RNC)
S.SHO.AS.1+VS.SHO.AS.2Softer+VS.SHO.AS.2Soft+VS.SHO.AS.3Soft2Softer+VS.SHO.AS.3Soft+VS.SHO.AS.3Softer+VS.SHO.AS.4+VS.SHO.AS.5+VS.SHO.AS.6)-1}*
%
S.SHO.AS.2Soft.RNC+VS.SHO.AS.3Soft2Softer.RNC+VS.SHO.AS.3Soft.RNC+VS.SHO.AS.3Softer.RNC+VS.SHO.AS.4.RNC+VS.SHO.AS.5.RNC+VS.SHO.AS.6.RN
unter names were changed.
2.1.7 Soft Handover Success Ratio (RNC)
S.SHO.Succ/VS.SHO.Att.RNC)*100%
sted CFrom
Congested Cell Ratio
VS.
To
Congested Cell Ratio
On Busy Hour/The Total Number Of Cells In RNC
Change reason:Co
Impact: None.
From
Soft Handover Overhead (RNC)
={[VS.SHO.AS.1+(VS.SHO.AS.2Softer+VS.SHO.AS.2Soft)*2+(VS.SHO.AS.3Soft2Softer+VS.SHO.AS.3Soft+VS.SHO.AS.3Softer)*3+VS.SHO.AS.4*4+VS.SHO.AS.5*5+VS.SHO.AS.6*6]/(V
100
To
Soft Handover Overhead (RNC)
={[VS.SHO.AS.1.RNC+(VS.SHO.AS.2Softer.RNC+VS.SHO.AS.2Soft.RNC)*2+(VS.SHO.AS.3Soft2Softer.RNC+VS.SHO.AS.3Soft.RNC+VS.SHO.AS.3Softer.RNC)*3+VS.SHO.AS.4.RNC*4+VS.SHO.AS.5.RNC*5+VS.SHO.AS.6.RNC*6]/(VS.SHO.AS.1.RNC+VS.SHO.AS.2Softer.RNC+V
C)-1}*100%
Change reason:Co
Impact: None.
From
Soft Handover Success Ratio (RNC)
=(V
To
Soft Handover Success Ratio (RNC)
2 KPI Modification KPI Difference Between RAN12.0 and RAN10.0
2-4 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
Issue 01 (2009-12-25)
=(VS.SHO.Succ.RNC/VS.SHO.Att.RNC)*100%
Change reason:The counter name was changed.
2.1.8 Soft Handover Success Ratio (Cell)
ESide+SHO.SuccRLDelUESide)/(SHO.AttRLAddUESide+SHO.AttRESide)]*100%
dd+VS.SHO.SuccRLDel)/(VS.SHO.AttRLAdd+VS.SHO.AttRLDel)]*
unter names were changed.
2.1.9 Softer Handover Success Ratio (RNC)
S.SoHo.Succ/VS.SoHO.ASU.AttRNC)*100%
%
unter names were changed.
2.1.10 Softer Handover Success Ratio (Cell)
+VS.SoHO.ASU.SuccRlDel)/(VS.SoHO.ASU.AttRLAdd+VSAttRlDel)]*100%
)/(VS.SoHO.AttRLAdd+VS.SoHO.AttRLD
unter names were changed.
Impact: None.
From
Soft Handover Success Ratio (Cell)
=[(SHO.SuccRLAddULDelU
To
Soft Handover Success Ratio (Cell)
=[(VS.SHO.SuccRLA100%
Change reason:Co
Impact: None.
From
Softer Handover Success Ratio (RNC)
=(V
To
Softer Handover Success Ratio (RNC)
=(VS.SoHO.Succ.RNC/VS.SoHO.Att.RNC)*100
Change reason:Co
Impact: None.
From
Softer Handover Success Ratio (Cell)
=[(VS.SoHO.ASU.SuccRLAdd.SoHO.ASU.
To
Softer Handover Success Ratio (Cell)
=[(VS.SoHO.SuccRLAdd+VS.SoHO.SuccRLDelel)]*100%
Change reason:Co
KPI Difference Between RAN12.0 and RAN10.0 2 KPI Modification
Issue 01 (2009-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
2-5
Impact: None.
2.1.11 Servi ll Change Success Ratio with SHO (H2H)
S.HSDPA.SHO.CellChg.SuccOut/VS.HSDPA.SHO.CellChg.AttOut)*100%
DPA.SHO.ServCellChg.AttOut)*100%
unter names were changed.
2.1.12 H2D nel Handover Success Ratio
S.HSDPA.ChR.HSDSCHtoDCH/VS.HSDPA.ChR.HSDSCHtoDCH.Att)*100%
0%
unter names were changed.
2.1.13 D2H nel Handover Success Ratio
S.HSDPA.ChR.DCHtoHSDSCH /VS.HSDPA.ChR.DCHtoHSDSCH.Att)*100%
0%
unter names were changed.
2.1.14 Intra- ency Hard Handover Success Ratio (RNC)
ce CeFrom
Service Cell Change Success Ratio with SHO (H2H)
=(V
To
Service Cell Change Success Ratio with SHO (H2H)
=(VS.HSDPA.SHO.ServCellChg.SuccOut/VS.HS
Change reason:Co
Impact: None.
ChanFrom
Channel Handover Success Ratio (H2D)
=(V
To
H2D Channel Handover Success Ratio
=(VS.HSDPA.H2D.Succ/VS.HSDPA.H2D.Att)*10
Change reason:Co
Impact: None.
ChanFrom
Channel Handover Success Ratio (D2H)
=(V
To
D2H Channel Handover Success Ratio
=(VS.HSDPA.D2H.Succ/VS.HSDPA.D2H.Att)*10
Change reason:Co
Impact: None.
frequFrom
Intra-frequency Hard Handover Success Ratio
2 KPI Modification KPI Difference Between RAN12.0 and RAN10.0
2-6 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
Issue 01 (2009-12-25)
=(VS.HHO.Succ.IntraFreq.RNC)/(VS.HHO.Att.IntraFreq.RNC)*100%
ntraFreq.RNC)*100%
unter names were changed.
2.1.15 Intra- ency Hard Handover Success Ratio (H2H)
S.HSDPA.HHO.SuccOutIIntraFreq/VS.HSDPA.HHO.AttOutIIntraFreq)*100%
A.HHO.H2H.SuccOutIntraFreq/VS.HSDPA.HHO.H2H.AttOutIntraFreq)*100
unter names were changed.
2.1.16 Inter- ency Hard Handover Success Ratio (RNC)
S.HHO.InterFreq.Succ.RNC/VS.HHO.InterFreq.Att.RNC)*100%
erFreq.RNC)*100%
unter names were changed.
2.1.17 Inter- ency Hard Handover Success Ratio (Cell)
S.HHO.InterFreq.SuccOut/VS.HHO.InterFreq.AttOut)*100%
FreqOut)*100%
To
Intra-frequency Hard Handover Success Ratio (RNC)
=(VS.HHO.SuccIntraFreq.RNC)/(VS.HHO.AttI
Change reason:Co
Impact: None.
frequFrom
Intra-frequency Hard Handover Success Ratio (H2H)
=(V
To
Intra-frequency Hard Handover Success Ratio (H2H)
=(VS.HSDP%
Change reason:Co
Impact: None.
frequFrom
Inter-frequency Hard Handover Success Ratio (RNC)
=(V
To
Inter-frequency Hard Handover Success Ratio (RNC)
=(VS.HHO.SuccInterFreq.RNC/VS.HHO.AttInt
Change reason:Co
Impact: None.
frequFrom
Inter-frequency Hard Handover Success Ratio (Cell)
=(V
To
Inter-frequency Hard Handover Success Ratio (Cell)
=(VS.HHO.SuccInterFreqOut/VS.HHO.AttInter
KPI Difference Between RAN12.0 and RAN10.0 2 KPI Modification
Issue 01 (2009-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
2-7
Change reason:Counter names were changed.
2.1.18 Inter- ency Hard Handover Success Ratio (H2H)
S.HSDPA.HHO.SuccOutInterFreq/VS.HSDPA.HHO.AttOutInterFreq)*100%
=(VS.HSDPA.HHO.H2H.SuccOutInterFreq/VS.HSDPA.HHO.H2H.AttOutInterFreq)*100
unter names were changed.
2.1.19 CS W nter-RAT Handover Out Success Ratio (RNC)
S.IRATHO.SuccCSOut.RNC/VS.IRATHO.AttCSOut.RNC)*100%
ttOutCS.RNC)*100%
unter names were changed.
2.1.20 PS W nter-RAT Handover Out Success Ratio (RNC)
S.IRATHO.SuccPSOutUTRAN.RNC/VS.IRATHO.AttPSOutUTRAN.RNC)*100%
THO.AttOutPSUTRAN.RNC)*100%
unter names were changed.
2.1.21 SRNC Relocation Success Ratio
Impact: None.
frequFrom
Inter-frequency Hard Handover Success Ratio (H2H)
=(V
To
Inter-frequency Hard Handover Success Ratio (H2H)
%
Change reason:Co
Impact: None.
2G IFrom
CS Inter-RAT Handover Success Ratio (RNC)
=(V
To
CS W2G Inter-RAT Handover Out Success Ratio (RNC)
=(VS.IRATHO.SuccOutCS.RNC/VS.IRATHO.A
Change reason:Co
Impact: None.
2G IFrom
PS Inter-RAT Handover Success Ratio (RNC)
=(V
To
PS W2G Inter-RAT Handover Out Success Ratio (RNC)
=(VS.IRATHO.SuccOutPSUTRAN.RNC/VS.IRA
Change reason:Co
Impact: None.
From
2 KPI Modification KPI Difference Between RAN12.0 and RAN10.0
2-8 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
Issue 01 (2009-12-25)
SRNC Relocation Success Ratio
=[(VS.SRELOC.SuccExec.UEInvCS.RNC+VS.SRELOC.SuccExec.UEInvPS.RNC+VS.SRELOC.SuccExec.UENonInvCS.RNC+VS.SRELOC.SuccExec.UENonInvPS.RNC)/(RELOC.AttPrepUEInvolCS+RELOC.AttPrepUENotInvolCS+RELOC.AttPrepUEInvolPS+RELOC.AttPrepU
tInvolPS)]*100%
ENotInvolCS+RELOC.SuccPrepUEInvolPS+RELOC.SuccPrepUE
Counters were changed.
2.1.22 TRNC Relocation Success Ratio
volPS+RELOC.AttResAllocUENotInvolCS+RELOttResAllocUENotInvolPS)]*100%
lCS+RELOC.SuccResAllocUEInvo0%
unter names were changed.
2.1.23 E-DCH Soft Handover Success Ratio
S.HSUPA.EDCH.SHO.Succ/VS.HSUPA.EDCH.SHO.Att)*100%
ttOut)*100%
unter names were changed.
ENo
To
SRNC Relocation Success Ratio
=[(VS.SRELOC.SuccExecUEInvolCS+VS.SRELOC.SuccExecUEInvolPS+VS.SRELOC.SuccExecUENonInvolCS+VS.SRELOC.SuccExecUENonInvolPS)/(RELOC.SuccPrepUEInvolCS+RELOC.SuccPrepUNotInvolPS)]*100%
Change reason:
Impact: None.
From
TRNC Relocation Success Ratio
=[(VS.TRELOC.SuccExec.UEInv+VS.TRELOC.SuccExec.UENotInv)/(RELOC.AttResAllocUEInvolCS+RELOC.AttResAllocUEInC.A
To
TRNC Relocation Success Ratio
=[(VS.TRELOC.SuccExecUEInvol+VS.TRELOC.SuccExecUENotInvol)/(RELOC.SuccResAllocUEInvolCS+RELOC.SuccResAllocUENotInvolPS+RELOC.SuccResAllocUENotInvolPS)]*10
Change reason:Co
Impact: None.
From
E-DCH Soft Handover Success Ratio
=(V
To
E-DCH Soft Handover Success Ratio
=(VS.HSUPA.SHO.SuccOut/VS.HSUPA.SHO.A
Change reason:Co
Impact: None.
KPI Difference Between RAN12.0 and RAN10.0 2 KPI Modification
Issue 01 (2009-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
2-9
2.1.24 E-DCm
ll Change Success Ratio with SHO .ServCellChg.SuccOut/VS.HSUPA.SHO.ServCellChg.AttOut)*100%
t: None.
2.1.25 E-DC o with Inter-HHO
CH Service Cell Change Success Ratio with Inter-HHO
.InterFreq.NoChR.Att)*100%
nter-HHO
.E2E.SuccOutInterFreq/VS.HSUPA.HHO.E2E.AttOutInterFreq)*100
t: None.
2.1.26 E2D C o
CH to DCH Handover Success Ratio (Intra Cell)
CH.Succ/VS.HSUPA.ChR.IntraCell.EDCHtoDCH.At
.Succ/VS.HSUPA.E2D.Att)*100%
t: None.
2.1.27 D2E C o
H to E-DCH Handover Success Ratio (Intra Cell)
H Service Cell Change Success Ratio with SHO Fro
E-DCH Service Cell Change Success Ratio with SHO=(VS.HSUPA.SHO.ServCellChg.Succ/VS.HSUPA.SHO.ServCellChg.Att)*100%
To
E-DCH Service Ce=(VS.HSUPA.SHO
Change reason:Counter names were changed.
Impac
H Service Cell Change Success RatiFrom
E-D
=(VS.HSUPA.HHO.InterFreq.NoChR.Succ/VS.HSUPA.HHO
To
E-DCH Service Cell Change Success Ratio with I
=(VS.HSUPA.HHO%
Change reason:Counter names were changed.
Impac
hannel Handover Success RatiFrom
E-D
=(VS.HSUPA.ChR.IntraCell.EDCHtoDt)*100%
To
E2D Channel Handover Success Ratio
=(VS.HSUPA.E2D
Change reason:Counter names were changed.
Impac
hannel Handover Success RatiFrom
DC
2 KPI Modification KPI Difference Between RAN12.0 and RAN10.0
2-10 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
Issue 01 (2009-12-25)
=(VS.HSUPA.ChR.IntraCell.EDCHtoDCH.Succ/VS.HSUPA.ChR.IntraCell.EDCHtoDCH.At
D2E Channel Handover Success Ratio
e reason:Counter names were changed.
2.1.28 E-DCH to DCH Handover Sum
100%
ndover Success Ratio (with Inter HHO)
eq)*100
2.1.29 HSUPA W2G Inter-RAT Handover Out Success Ratio
S.HSUPA.IRATHO.SuccOutPSUTRAN/VS.HSUPA.IRATHO.AttOutPSUTRAN)*100%
-RAT Handover Out Success Ratio
OutPSUTRAN/VS.IRATHO.HSUPA.AttOutPSUTRAN)*100
e reason:Counter names were changed.
2.1.30 AMR Call D
S.RAB.Loss.CS.AMR/(VS.RAB.Loss.CS.AMR+VS.RAB.Loss.CS.Norm.AMR)]*100%
tio
t)*100%
To
=(VS.HSUPA.D2E.Succ/VS.HSUPA.D2E.Att)*100%
Chang
Impact: None.
ccess Ratio (with Inter HHO) Fro
E-DCH to DCH Handover Success Ratio (with Inter HHO)
=(VS.HSUPA.ChR.InterFreq.EDCHtoDCH.Succ/VS.HSUPA.ChR.InterFreq.EDCHtoDCH.Att)*
To
E-DCH to DCH Ha
=(VS.HSUPA.HHO.E2D.SuccOutInterFreq/VS.HSUPA.HHO.E2D.AttOutInterFr%
Change reason:Counter names were changed.
Impact: None.
HSUPA Inter-RAT Handover Success Ratio (WCDMA to GPRS)
=(V
To
HSUPA W2G Inter
=(VS.IRATHO.HSUPA.Succ%
Chang
Impact: None.
rop Ratio From
AMR Call Drop Ratio
=[V
To
AMR Call Drop Ra
KPI Difference Between RAN12.0 and RAN10.0 2 KPI Modification
Issue 01 (2009-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
2-11
=[VS.RAB.AbnormRel.A%
MR/(VS.RAB.AbnormRel.AMR+VS.RAB.NormRel.AMR)]*100
e reason:Counter names were changed.
2.1.31 VP C op Ratio
.Conv64K+VS.Norm.Rel.CS.Conv.RB.64)]
.AbnormRel.CS64+VS.RAB.NormRel.CS64)]*100%
e reason:Counter names were changed.
2.1.32 HSUP
PA Service Drop Ratio
norm/(VS.HSUPA.RAB.Loss.Abnorm+VS.HSUPA.RAB.Loss.
HSUPA Service Drop Ratio
=[VS.HSUPA.RAB.AbnormRel/(VS.HSUPA.RAB.AbnormRel+VS.HSUPA.RAB.Normel+VS.HSUPA.HHO.E2D.SuccOutIntraFreq+VS.HSUPA.HHO.E2D.SuccOutInterFre
q+VS.HSUPA.E2F.Succ+VS.HSUPA.E2D.Succ)]*100%
were changed.
2.2 Counte2.2.1 Average CPU Lo
=VS.SPU.CPULOAD.MEAN
To
Chang
Impact: None.
all DrFrom
VP Call Drop Ratio
=[VS.RAB.Loss.CS.Conv64K/(VS.RAB.Loss.CS*100%
VP Call Drop Ratio
=[VS.RAB.AbnormRel.CS64/(VS.RAB
Chang
Impact: None.
A Service Drop Ratio From
HSU
=[VS.HSUPA.RAB.Loss.AbNorm+VS.HSUPA.ChR.IntraCell.EDCHtoDCH.Succ+VS.HSUPA.ChR.IntraFreq.EDCHtoDCH.Succ+VS.HSUPA.ChR.InterFreq.EDCHtoDCH.Succ+VS.HSUPA.ChR.EDCHtoFACH.Succ)]*100%
To
R
Change reason:Counter names
Impact: None.
rs were changed ad
From
Average CPU Load
2 KPI Modification KPI Difference Between RAN12.0 and RAN10.0
2-12 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
Issue 01 (2009-12-25)
Average CPU Load=VS.XPU.CPULOAD.MEAN
e reason:The counter name was changed.
2.2.2 CS Serm
atio
el.CS+VS.RAB.NormRel.CS)]*100%
e reason:Counter names were changed.
2.2.3 Averag for CS Service
ech Service UL Average BLER(KPI Name):
64
VS.UlBler.AMR
VS.ULBler.CS64
rvice was changed, the counter for CS64 was changed;
2.2.4 Mean Number of CS Users (RNC)
earers(RNC) (KPI Name)
Chang
Impact: None.
vice Drop Ratio Fro
CS Service Drop Ratio
=[(VS.RAB.Loss.CS.Abnorm+VS.RAB.Loss.CS.RF)/(VS.RAB.Loss.CS.RF+VS.RAB.Loss.CS.Abnorm+VS.RAB.Loss.CS.Norm)]*100%
To
CS Service Drop R
=[VS.RAB.AbnormRel.CS/(VS.RAB.AbnormR
Chang
Impact: None.
e UL BLERFrom
Spe
VS.ULBlerAMR
VS.ULBlerCSRT.
To
Average UL BLER for CS Service(KPI Name):
Change reason:The counter name for AMR seservice
Impact: None.
From
DL Traffic of Typical Radio B
VS.AMR.RB.DL.12.2;
VS.RB.DLConvCS.64.RNC
To
KPI Difference Between RAN12.0 and RAN10.0 2 KPI Modification
Issue 01 (2009-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
2-13
Mean Number of CS Users (RNC) (KPI Name)
+VS.RB.AMR.DL.7.4.RNC+VS.RB.AMR.DL.7.95.RNC+VS.RB.AMR.
VS.RB.CS.Conv.DL.64.RNC
he counters with other bit rates of the AMR were added.
ions.
2.2.5 Mean Users (Cell)
Traffic of Typical Radio Bearers(Cell) (KPI Name):
.2+VS.RB.AMR.DL.10.2+VS.RB.AMR.DL.7.95+VS.RB.AMR.DL.7.4+VS.RB.AMR.DL.6.7+VS.RB.AMR.DL.5.9+VS.RB.AMR.DL.5.15+VS.RB.AMR.DL.4.75);
VS.RB.CS.Conv.DL.64
e counters with other bit rates of the AMR were added.
ever in the same conditions.
2.2.6 UL Tra oS Classes
;
L.128.Thruput
(VS.RB.AMR.DL.4.75.RNC+VS.RB.AMR.DL.5.15.RNC+VS.RB.AMR.DL.5.9.RNC+VS.RB.AMR.DL.6.7.RNCDL.10.2.RNC+VS.RB.AMR.DL.12.2.RNC);
Change reason:The KPI name was changed, tservice
Impact: The value may be greater than ever in the same condit
Number of CSFrom
DL
VS.AMR.Ctrl.DL12.2
VS.RB.DLConvCS.64
To
Mean Number of CS Users (Cell) (KPI Name):
(VS.RB.AMR.DL.12
Change reason:The KPI name was changed, thservice
Impact: The value may be greater than
ffic Volume of QFrom
(VS.AMR.Ctrl.UL12.2)*12.2K
VS.PS.Str.UL.64.Thruputt;
VS.PS.Int.UL.64.Thruput;
VS.PS.Int.UL.128.Thruput;
VS.PS.Int.UL.144.Thruput;
VS.PS.Int.UL.384.Thruput;
VS.PS.bkg.UL.64.Thruput;
VS.PS.bkg.U
VS.PS.bkg.UL.144.Thruput;
VS.PS.bkg.UL.384.Thruput
To
2 KPI Modification KPI Difference Between RAN12.0 and RAN10.0
2-14 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
Issue 01 (2009-12-25)
(VS.RB.AMR.UL.12.2*12.2K+VS.RB.AMR.UL.10.2*10.2K+VS.RB.AMR.UL.7.95*7.95k+VS.RB.AMR.UL.7.4*7.4K+VS.RB.AMR.UL.5.9*5.9K+VS.RB.AMR.UL.5.15*5.15K+VS.R
*60};
e reason:The counters with other bit rates of the AMR service were added.
than ever in the same conditions.
2.2.7 DL Traffic Volume of QoS Classes
K;
L.128.Thruput;
.2K+VS.RB.AMR.DL.10.2*10.2K+VS.RB.AMR.DL.7.95*7.95k+VS.RB.AMR.DL.5.9*5.9K+VS.RB.AMR.DL.5.15*5.15K+VS.RP*60};
B.AMR.UL.4.75*4.75K)*{SP
VS.PS.Str.UL.64.Traffic;
VS.PS.Int.UL.64.Traffic;
VS.PS.Int.UL.128.Traffic;
VS.PS.Int.UL.144.Traffic;
VS.PS.Int.UL.384.Traffic;
VS.PS.Bkg.UL.64.Traffic;
VS.PS.Bkg.UL.128.Traffic;
VS.PS.Bkg.UL.144.Traffic;
VS.PS.Bkg.UL.384.Traffic
Chang
Impact: The value may be greater
From
(VS.AMR.Ctrl.DL12.2)*12.2
VS.CS.Conv.DL.64.Thruput;
VS.PS.Str.DL.64.Thruput;
VS.PS.Str.DL.128.Thruput;
VS.PS.Str.DL.144.Thruput;
VS.PS.Int.DL.64.Thruput;
VS.PS.Int.DL.128.Thruput;
VS.PS.Int.DL.144.Thruput;
VS.PS.Int.DL.384.Thruput;
VS.PS.bkg.DL.64.Thruput;
VS.PS.bkg.D
VS.PS.bkg.DL.144.Thruput;
VS.PS.bkg.DL.384.Thruput
To
(VS.RB.AMR.DL.12.2*12VS.RB.AMR.DL.7.4*7.4K+B.AMR.DL.4.75*4.75K)*{S
VS.CS.Conv.DL.64.Traffic;
KPI Difference Between RAN12.0 and RAN10.0 2 KPI Modification
Issue 01 (2009-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
2-15
VS.PS.Str.DL.64.Traffic;
VS.PS.Str.DL.128.Traffic;
VS.PS.Str.DL.144.Traffic;
VS.PS.Int.DL.64.Traffic;
VS.PS.Int.DL.128.Traffic;
VS.PS.Int.DL.144.Traffic;
VS.PS.Int.DL.384.Traffic;
VS.PS.Bkg.DL.64.Traffic;
VS.PS.Bkg.DL.128.Traffic;
VS.PS.Bkg.DL.144.Traffic;
VS.PS.Bkg.DL.384.Traffic
Change reason:The counters with other bit rates of the AMR service were added.
er in the same conditions.
2.2.8 MBMSm
ell;
ell
eanThroughput;
Change reason:Counter names were changed.
Impact: None.
2.2.9 Radio m
Total Number Of Cells In RNC*{SP*60})*100%
navailability Ratio=(VS.Cell.UnavailTime.Sys>)/(The Total Number Of
Change reason:The counter was changed.
Impact: The value may be greater than ev
Service Throughput Fro
VS.MBMS.PTM.MeanThroughput.C
VS.MBMS.PTP.MeanThroughput.C
To
VS.MBMS.PTM.M
VS.MBMS.PTP.MeanThroughput
Network Unavailability Fro
Radio Network Unavailability Ratio
=(VS.Cell.UnavailTime.OM)/(The
To
Radio Network UCells In RNC*{SP*60})*100%
Impact: None.
2 KPI Modification KPI Difference Between RAN12.0 and RAN10.0
2-16 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
Issue 01 (2009-12-25)
2.2.10 HSDPm
PA Service Drop Ratio
uccOutInterFreq)]*100
SDPA Service Drop atio=[(VS.HSDPA.RAB.AbnormRel)/(VS.HSDPA.RAB.AbnormRel+VS.HSDPA.RAB.
NormRel+VS.HSDPA.H2D.Succ+VS.HSDPA.H2F.Succ+VS.HSDPA.HHO.H2D.SuccOutIntraFreq+VS.HSDPA.HHO.H2D.SuccOutInterFreq)]*100%
hanged.
2.3 The formula was changed 2.3.1 AMR T NC)
R.DL.5.15.RNC+VS.RB.AMR.DL.5.9.RNC+VS.7.4.RNC+VS.RB.AMR.DL.7.95.RNC+VS.RB.AM
0.2.RNC+VS.RB.AMR.DL.12.2.RNC)*{SP}/60]/(VS.RAB.AbnormRel.AMR.RNC)
were changed.
act: More accurate to evaluate the KPI.
2.3.2 AMR Tr
.DL.10.2+VS.RB.AMR.DL.7.95+VS.RB.AMR.DL.7DL.5.9+VS.RB.AMR.DL.5.15+VS.RB.AMR.DL.4.7
}/60]/VS.RAB.AbnormRel.AMR
A Service Drop Ratio Fro
HSD
=[(VS.HSDPA.RAB.Loss.Abnorm.NonRF+VS.HSDPA.RAB.Loss.RF)/(VS.HSDPA.RAB.Loss.Abnorm.NonRF+VS.HSDPA.RAB.Loss.RF+VS.HSDPA.RAB.Loss.Norm+VS.HSDPA.RAB.Loss.InActivity+VS.HSDPA.ChR.HSDSCHtoDCH+VS.HSDPA.ChR.HSDSCHtoFACH+VS.HSDPA.HHO.H2D.SuccOutIntraFreq+VS.HSDPA.HHO.H2D.S%
To
HR
Change reason:The counters were c
Impact: None.
raffic Drop Ratio (RFrom
AMR_TDR=(VS.AMR.RB.DL.12.2*60)/∑(VS.RAB.Loss.CS.AMR)
To
AMR Traffic Drop Ratio (RNC)
=[(VS.RB.AMR.DL.4.75.RNC+VS.RB.AMRB.AMR.DL.6.7.RNC+VS.RB.AMR.DL.R.DL.1
Change reason:The formula was changed, all the counter names
Imp
affic Drop Ratio (Cell)From
AMR_TDR=(VS.AMR.Ctrl.DL12.2*60)/VS.RAB.Loss.CS.AMR
To
AMR Traffic Drop Ratio (Cell)
=[(VS.RB.AMR.DL.12.2+VS.RB.AMR.4+VS.RB.AMR.DL.6.7+VS.RB.AMR.5)*{SP
KPI Difference Between RAN12.0 and RAN10.0 2 KPI Modification
Issue 01 (2009-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
2-17
Change reason:The formula was changed, all the counter names were changed.
act: More accurate to evaluate the KPI.
2.3.3 VP Tra NC) From
B.CS.Conv.DL.64.RNC*{SP}/60)/(VS.RAB.AbnormRel.CS64.RNC)
ere changed.
act: More accurate to evaluate the KPI.
2.3.4 VP Tra ell) From
VP_TDR=(VS.RB.DLConvCS.64 )/VS.RAB.Loss.CS.Conv64K
To
VP Traffic Drop Ratio (Cell)
=(VS.RB.CS.Conv.DL.64*{SP}/60)/VS.RAB.AbnormRel.CS64
Change reason:The formula was changed, all the counter names were changed.
Impact: More accurate to evaluate the KPI.
Imp
ffic Drop Ratio (R
VP_TDR =(VS.RB.DLConvCS.64.RNC*60)/∑(VS.RAB.Loss.CS.Conv64K)
To
VP Traffic Drop Ratio (RNC)
=(VS.R
Change reason:The formula was changed, all the counter names w
Imp
ffic Drop Ratio (C
*60
KPI Difference Between RAN12.0 and RAN10.0 3 KPI Deletion
Issue 01 (2009-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
3-1
3 KPI Deletion
3.1 DL RLChange reason:The counters were deleted.
nt services.
3.2 MBMS Service Channel Number Change reason:Deleted for semantic error.It was replaced by the new KPI of Mean Number of MBMS Users.
Impact: None.
C Average Retransmission Ratio
Impact: None, this KPI can be divided into differe