Download - Kreiranje DWF File
7/21/2019 Kreiranje DWF File
http://slidepdf.com/reader/full/kreiranje-dwf-file 1/4
To create a DWF file
in AutoCAD:
First open the DWG
file in AutoCAD and
click “file” on theupper menu bar, then
select “Plot”.
1st select DWF printer
7/21/2019 Kreiranje DWF File
http://slidepdf.com/reader/full/kreiranje-dwf-file 2/4
Select the appropriate
sheet size.
Next define the printable area around
your file.
Also, select theappropriate scale and
drawing units within
the “plot scale” box, in
lower right side of plot panel.
7/21/2019 Kreiranje DWF File
http://slidepdf.com/reader/full/kreiranje-dwf-file 3/4
Use the preview
button in lower leftcorner, to view you
file.
Within the preview
check to see if
anything is cutoff,or too big,
orientation is
correct, etc.
Hit “Esc” on the
keyboard to go back to the plot
panel.
7/21/2019 Kreiranje DWF File
http://slidepdf.com/reader/full/kreiranje-dwf-file 4/4
Once;
Printer: DWF
Name is determinedScale is set
Paper size is setPlot area is defined
Preview was good
Then;
Select “OK”
If you did not name
your file yet, please
do. Jeffcoat is not
responsible for jobswhich are out-of-
order because you
neglected to nameyour files correctly.
Help us make your project print
properly.
These instructions are intended for the strict use of creating DWF files for Jeffcoat
Blueprint only, and any coping or unauthorized use is prohibited.