Download - Kristeel Catalouge
-
8/2/2019 Kristeel Catalouge
1/42
-
8/2/2019 Kristeel Catalouge
2/42
-
8/2/2019 Kristeel Catalouge
3/42 s s sISO 9001-2008R
www.kristeel.com
-
8/2/2019 Kristeel Catalouge
4/42
-
8/2/2019 Kristeel Catalouge
5/42
FRONT SIDE: Top edge mm, Bottom edge mm.REVERSE SIDE: Top edge 1/10ths, 1/20ths, 1/50ths.Bottom edge 1/16ths, 1/32nds, 1/64ths
1/2 801 A 5
801 C 8
801 C 10
150 mm/6 in
300 mm/12 in
300 mm/12 in
15 mm
25 mm
25 mm
0.5 mm
0.8 mm
1.0 mm
MODEL 801
MODEL 1302
FRONT SIDE: Top edge 1/2 mm, mm,Bottom edge 1/16ths, 1/32nds, 1/64ths,REVERSE SIDE: Conversion Table inches to mm.
MODEL 901
METRIC: Top edge 1/2 mm, Bottom edge mm;ENGLISH: Top edge 1/10ths, 1/20ths, 1/50thsBottom edge 1/16ths, 1/32nds, 1/64ths,* Please specify when ordering.
901 A 5901 A 10901 C 8901 C 10
150 mm/6 in150 mm/6 in300 mm/12 in300 mm/12 in
15 mm15 mm25 mm25 mm
0.5 mm1.0 mm0.8 mm1.0 mm
MODEL 1202
1202 150mm / 6 in 6 mm 0.5 mm
FRONT SIDE: Top edge 1/2 mm, mm,Bottom edge Inches.
The rules can also be supplied in either dull or polished finish as per customers/clients specification.
www.kristeel.com
-
8/2/2019 Kristeel Catalouge
6/42
MODEL BCR
MODEL CFR CENTRE FINDING RULE
MODEL NSR-6, NSR -12, NSR-18, NSR - 24 NON-SKID RULE
Made in 0.5 mm thick stainless steel with cork backing for antiskid. A very handy tool for draftsmen and artist.Available in sizes : 6", 12"18" & 24"
MODEL HR-6, HR-12 HOOK RULE
A easy tool for carpenter provided with a hook for ease of operation on work peice. Thisscale known as 4R rules, each of this has four different scales. One face has 1/8" & 1/16"division, the other 1/32" & 1/64" divisions. The scale have adjustable hooks, meaning thatyou can slide the hook fully to one side so that it clears the opposite edge.Available in sizes 150 mm & 300 mm
Kristeel has developed an easy look rule with hard black chrome finish. The white graduation on the black backgroundmake this rule very user friendly. Especially when required for fine and continuous measurement. The reliability &accuracy remains as per EEC standards.
Centre finding rule is a very unique ruler and it helps infinding the centre of any linear measurement.Available in 6", 12", 24" & 36" lengths, The rules have dualscale - normal graduations on the top edge & half- scalegraduations on the opposite edge. To find the centre, justfind the identical measurement from the top scale on thelower scale
CFR 6CFR 12CFR 24CFR 36
150 mm300 mm600 mm1000 mm
BLACK CHROME RULE/EASY LOOK RULE
www.kristeel.com
ISO 9001-2008
R
1/3
NSR 6NSR 12NSR 24NSR 36
150 mm300 mm600 mm1000 mm
HR 6HR 12
150 mm300 mm
-
8/2/2019 Kristeel Catalouge
7/42
CONTRACTION (SHRINKAGE) RULES
...18
1000
...117
1000
...113
1000
...110
1000
...120
1000
Cast Iron
Steel & Brass
Aluminium
C.I. Malleable Iron
Steel (Stainless)
Manganese ...125
1000
Contractions not listed can be supplied upon request. Listed above are contractions that apply to most metals in use today.They must not be taken too literally, but use as a guide only. Each user must judge for himself.
SIGNATURE SERIES RULESMODEL SSC
Satin Chrome Antiglare Finish. Manufactured fromHardened and Tempered Japanese Stainless Steel.Permanently marked graduations without enamel paint ingraduations. Accuracy to EEC - 1 Standards, i.e. 0.2mmat 20c for 1000 mm Rule. Calibration Certificat econforming accuracy to EEC - I International Standard(Euro Norm). Signature of Guarantee. Least countMeasurement Chart. Important formula of Statistics withCharts. Area and Volume Charts. Length Conversion Table.
SSC - 12SSC - 24SSC - 36
30 mm30 mm35 mm
300 mm/ 12in600 mm/24in1000 mm/ 36in
1.0 mm1.2 mm1.5 mm
500 mm - 3 - Contraction 1 %,1.5%,2%
1000 mm - 3 - Contraction 1 %,1.5%,2%
500 mm - 4 - Contraction 1 .2%,1.5%,1 .8%,3%
1000 mm - 4 - Contraction 1 .2%,1.5%,1 .8%,3%
500 mm - Single Contraction 2.5%
500 mm - Single Contraction 1 %
1000 mm - Single Contraction 1 %
500 mm - Single Contraction 1 .5%
1000 mm - Single Contraction 1.5%
500 mm - Single Contraction 1.8%
1000 mm - Single Contraction 1.8%
500 mm - Single Contraction 2%
1000 mm - Single Contraction 2%
501 D
501 F
502 D
502 F
503 D
601 D
601 F
602 D
602 F
603 D
603 F
604 D
604 F
www.kristeel.com
-
8/2/2019 Kristeel Catalouge
8/42
MODEL 1205, 1206, 1207, 1208, 1209,1210
Top edge 1/2 mm, mm;Bottom edge 1/16ths, 1/32nds, 1/64ths,
120512061207120812091210
1000 mm/36 in1000 mm/36 in600 mm/24 in600 mm/24 in600 mm/24 in300 mm/12 in
15 mm15 mm22 mm12 mm15 mm12 mm
0.5 mm0.5 mm0.5 mm0.5 mm0.5 mm0.5 mm
642643
MODEL 1204
1204 1000 mm 15 mm 0.5 mm 6
Top edge 1/2 mm, mm;Bottom edge mm, mm : 6 Fold
www.kristeel.com
ISO 9001-2008
R
1/5
-
8/2/2019 Kristeel Catalouge
9/42
www.kristeel.com
ISO 9001-2008
R
2/1
For Machinists, Draughtsmen, layout men & other mechanics.Protractor has easy etched reading graduations from 0 to 180on opposite directions.
ELEGANT DESIGNACCURATE GRADUATIONPOLISHED FINISH
MODEL 1501 - A
For Machinists, Draughtsmen, layout men & other mechanics.Protractor has easy etched reading graduations from 0 to 180on opposite directions.The protractor also includes depth gaugescale for measuring the depth
ELEGANT DESIGNACCURATE GRADUATIONPOLISHED FINISHED
-
8/2/2019 Kristeel Catalouge
10/42
DEPTH GAUGE
DEPTH GAUGE CUM PROTRACTOR
STAINLESS STEEL DEGREEPROTRACTOR GAUGE- HEAVY DUTY
MODEL DP-HD
MODEL 1503 DG-2
MODEL 1503 DG-1
A handy Metric or English convertable depth gauge.The set consist of one head and two stainless steelrulers; one metric, the other English. Either one can beeasily slipped and locked in to the slot. The rules canbe used separately, If desired. Metric graduation in millimeters; English in 64ths. Each set individuallypacked in PVC covers.
A handy metric or English convertable depth gauge.The set consists of one head and two stainless steelrules; one metric, the other English. Either one can beeasily slipped and locked in to the slot. The rules canbe used separately, if desired. Metric graduations in
millimeters, English in 64ths. Each set individuallypacked in PVC covers. Also engraved are the 30, 45and 60angle
Heavy duty protractor with hollow base. Handytool for easy marking on works piece in tool room &machine.
www.kristeel.com
ISO 9001-2008
R
2/2
R
ModelDP-HD6DP-HD8
Arm Length150 mm200 mm
-
8/2/2019 Kristeel Catalouge
11/42
-
8/2/2019 Kristeel Catalouge
12/42
CALIPER GAUGE
CG-3CG-4
80 mm/3 in100mm/4 in
Only outside readings.Only outside readings.
AMERICAN WIRE GAUGE
Made of high quality stainless steel
MODEL AWG
MODEL 1505
S.W.G. ROUND WIRE GAUGE
MODEL 1506
S.W.G. RECTANGULAR WIRE GAUGE
R
Made of Steel. Graduations in both British &Metric SystemAlso available in following modelsSWF - wire gauge heavy duty ferrousSWNF - wire gauge heavy duty non-ferrous
www.kristeel.com
ISO 9001-2008
R
2/4
A caliper gauge with Metric and English graduations.Available in brass. This is a prestige advertising gift.individually packed in PVC covers.
MODEL 1504- CG 31504- CG 4
R
-
8/2/2019 Kristeel Catalouge
13/42
MODEL 1507
SCREW CUTTING GAUGE
Combined threading tool gauge for ACME 14 and angular threads 47 , 55 , 60
MODEL 1508
1 Made of Steel2 Graduations is both British & Metric System
UNIVERSAL GAUGE
The universal grinding gauge combines twist drillgrinding gauge, centre gauge, hexagon and rightangle 55 , 60
MODEL 1509
MODEL NO 1510 TWIST DRILL GAUGE
For twist drill with an acute angle of 118upto50 mm 2" diameter.
www.kristeel.com
ISO 9001-2008
R
2/5
-
8/2/2019 Kristeel Catalouge
14/42
www.kristeel.com
ISO 9001-2008
R
2/6
www.kristeel.com
RADIUS GAUGE
Concave and convex blades. With nickel plated caseand locking screw, For the checking of sectors of circle.
MODEL 1512 A1512 B1512 C
DRILL GAUGEMODEL 1513
TAPER GAUGEMODEL 1514
MODEL 1511 A
For the measuring of cylindrical bores.Reading : 0.1 mmFlat and not hardened
BORE GAUGE
MODEL
1511 A1511 B
1511 C
LENGTH
1-15 mm15-30 mm
30-45 mm
171620
1-77.5-15
15.5-25
1-3 = 0.25, 3-7 = 0.57.5-15=0.5
15.5-25 = 0.5
Hardened and finely ground.Range mm 1/16-1/1"Lead mm 1/64Holds no. 29
165 mm 5 mm OHNS
R
1511 B1511 C
R
-
8/2/2019 Kristeel Catalouge
15/42
Length100 mm/4 Inch
150mm/6Inch
200mm/8 Inch
300 mm/12 Inch
ESG - 4ESG - 6ESG - 8ESG -12
Width70 mm
100 mm
130 mm
175 mm
Thickness1.2 mm
1.2 mm
1.2 mm
1.2 mm
Model
MODEL 1515
Suitable for measuring circumferenceand diameters of all round bodies.Graduation in mm, Reading 0.1 mm
CIRCUMFERENCE GAUGE
SPIRIT LEVEL
- 12 Inch/300mm
Execution : With horizontal and vertical bubble,of non deforming light-metal.
MODEL ESG ENGINEER'S SQUARE
This square is made out of steel stock and hardened blade.The blade is fix to the stock by taper pins.All faces are precision ground.
MODEL ESP PLAIN ENGINEER'S SQUARE
Precision - squares Stainless SteelEdges and sides extra finely ground, accurately finished.Suitable for inspection and precision engineering.
www.kristeel.com
ISO 9001-2008
R
2/7
www.kristeel.com
R
Length100mm
150mm
200mm
300mm
ModelESP - 4
ESP - 6
ESP - 8
ESP - 12
Width70mm
100mm
130mm
175mm
A60-950
20-300
B940-2200
300-700
C2190-3460
700-1100
D3450-4720
1100-1500
E4710-5980
1500-1900
F5970-7230
1900-2300
CircumferenceDiameter
mmmm
G H7220-8490
2300-2700
8480-9740
2700-3100
MODEL SL 101SL 102
-
8/2/2019 Kristeel Catalouge
16/42
www.kristeel.com
ISO 9001-2008
R
2/8
www.kristeel.com
HEIGHT GAUGE
MODEL BRW BRASS ROSEWOOD SQUARES
ModelHG - 12
HG - 18
HG - 24
Length300 mm
450mm
600mm
WELD FILLET GAUGEMODEL WG-A
A precise instrument for measuring & marking on work piece in toolroom & Q. C. department.The Height gauge comes to you with rich chrome plate matt finish ruleand is made of high quality stainless steel available in size of 300 mm450 mm and 600 mm, with least count of 0.02 mm.This world class instrument comes to you in a handsome and durablepacking.
High quality squares made of brass base with dull chromefinish ruler. A quality tool with high aesthetic appear
available in size 75 mm, 150 mm, 200mm & 300mm
A versatile tool for the use of weldingoperator. The tool can be used withease for weld joint preparatoryfunctions as well as for checking ofthe weld joint. The tool combines abore gauge, angle gauge, depthgauge & weld height gauge. Thetool is made in stainless steel withpolish finish.
MODEL HG-12HG-18HG-24
-
8/2/2019 Kristeel Catalouge
17/42
-
8/2/2019 Kristeel Catalouge
18/42
www.kristeel.com
ISO 9001-2008
R
2/10
www.kristeel.com
MODEL FG -27 FEELER GAUGE - 27 BLADES
MODEL SPG SCREW PITCH GAUGE
MODEL APG
ACME screw pitch gauge is used to check thread profile oflead screwsRange : 10n To 1n (16 Blades)n = thread per inch (TPI)
ACME SCREW PITCH GAUGE
This gauge is used to check flatness & gap betweenmating parts.Range : 0.001" to 0.025" (English / Metric Model)(27 Blades)
Blade length 3" and 4"
This product is available in different models. Commonmodels are the 28 leaves 4-80 pitch, 30 leaves 4-42 pitch,and 30 leaves 3.5-60 pitch-55 degrees whitworth. Narrowleaf design allows checking both external and internalthreads - even in small holes not accessible with wide leaftype gauges.
-
8/2/2019 Kristeel Catalouge
19/42
www.kristeel.com
ISO 9001-2008
R
2/11
www.kristeel.comwww.kristeel.com
MODEL RAG RAKE ANGLE GAUGE
MODEL EK 1 PRECISION ENGINEER'S KIT
MODEL MSBG METAL SLIDING BEVEL GAUGE
Rake ange guage is used to check up the rake angle forbroaches and also to set the shearing machine bladeangle, It is used by all tool room operators , fabricatorsand to some extent by the welders for checking angles forplates having butt weld
The Precision kit includes handsomely packed 8precision gauges namely - 2pc combination try & metersquare, bore gauge, universal gauge, degreeprotractor-cum depth gauge, screw cutting gauge,radius gauge, round wire gauge and caliper gauge. Thekit serves every purpose of tool room / workshopoperations, right from measuring/marking thickness,angles, depth, radius, length, bore, level, diameters etc.
This metal bevel gauge the base of which is made in toolsteel & the blade is made in stainless steel with hardchrome plated. This gauge can be set at any angle usingmaster angle gauge of protractor.The blade is adjustable that is useful to mark a long lineadjustable blade rest in metal base while not in use hangesafety packing this gauge is useful in toolroom diemarkers, & woodworking industries.
R
R
1 DIVISION = 1
-
8/2/2019 Kristeel Catalouge
20/42
www.kristeel.com
ISO 9001-2008
R
2/12
www.kristeel.comwww.kristeel.com
MODEL PC POCKET CALIPER
MODEL VCC VERNIER CALIPER COLUMBUS
MODEL SC 4 INCH SLIDE CALIPER
Kristeel all-purpose slide calipers, sized to slip into yourpocket. can make quick, accurate, inside and outside
diameter measurements. This tool is well suited for usein training programs, toolroom and machine shop useand automotive use.
This is a stainless steel caliper with inside and outsidereading in metric & inches. Decimal equivalents on back.Scale has etched and filled graduations.Available Size : 3" .
This is a stainless steel slide caliper with inside andoutside readings in 16ths & 32nds. Decimal equivalentson back. Scale has etched and filled graduations.Available Size : 4" .
R
-
8/2/2019 Kristeel Catalouge
21/42ISO 9001-2008
R
2/13
MODEL MG MARKING GAUGE
CENTRE SQUAREMODEL CS
Marking Gauge is used for marking on steel/wooden platesec. It has a stopper which starts from the zero graduation. Itis provided with a knob arrangement which can be locked toprecisely check a certain linear measurement.
Centre Square: Made of special steel. Used for markingthe centre of any round object.
www.kristeel.comwww.kristeel.com
These set squares are available in two sizes i.e 30-60-90degrees and 45-45-90 degrees. They have precisionground angles for convenient set-ups in tooling,production and inspection, holes can also be provided foreasy mounting
R R
30-60 -90 SET SQUARE 45 -45 -90 SET SQUARE
MODEL SS-ASS-B
-
8/2/2019 Kristeel Catalouge
22/42
MODEL MURG
Available Size: 4"
MULTI USE RULE & GAUGE
MODEL HAG HAIR GAUGE
MODEL TDG-B TYRE DEPTH GAUGE - BRASS
Made of Brass.Available Size: 30mm
www.kristeel.com
ISO 9001-2008
R
2/14
www.kristeel.com
Made of long- wearing stainless steel.This gauge is used for five distinct functions1 Drill Point gauge is used for checking 59 degree
angle drill points.2. Bevel Protractor is used for measuring and laying out
angles.3. Centre finder locates centres of shafts or circles.4. Circle divider(upto nine equal parts)is used for
dividing circle into sectors, regular polygon anpolygrams.5. Tap and drill table shows popular tap sizes with
correct drill sizes for National form of thread .
This gauge is used for measuring the precise amount ofhair needed tying a given hank. Made of stainless steelwith slit and a graduation scale, upon which individualsettings can be marked.
R
-
8/2/2019 Kristeel Catalouge
23/42
www.kristeel.com
ISO 9001-2008
R
2/15
www.kristeel.com
This 600mm folding rule is made of hardened & tempered stainlesssteel material and incorporates a scale from 0to 120in incrementsof Two Center Dots are provided, one on each blade and with theaid of dividers, the ruler can be set at any angle, or an existing anglecan be determined with the line of chords. The circumference scaleindicates the circumference by measuring the diameter. it also hasSub Divided mm and Line of Chord Scale on one side. On the otherside Sub Divided mm and a Circumference Scale in mm is provided.
Each Rule is packed in PVC pouch with instruction Leaflet.
This Hard Chrome Plated Guage is used to measure the ACMEThreads for setting of cutting tool. This gauge is used to set the quickchange gearbox to required number of threads per inch & also to setCompound rest 14.5to the right. (half the included thread angle.)
Range: 1 to 10 TPI. (14 sizes)
The Gauge is made of hardened & tempered stainless steel material1 mm thick. These high accurate angles are useful to check CounterHoles Angle. Each guage is packed in PVC pouch.
Range: 60, 82, 90, 100, 110, 120Accuracy is within 15 minutes
MODEL 1211 600 MM FOLDING RULE WITH ANGLE CALCULATION CHORD
MODEL STTG-29 29 SCREW THREAD TOOL GAUGE
MODEL AGCG 60-120 DEGREE COUNTERSINK ANGLE GAUGE
R
R
R
-
8/2/2019 Kristeel Catalouge
24/42
www.kristeel.com
ISO 9001-2008
R
2/16
www.kristeel.com
This chrome plated 6 ruler is made of 1 mm thick hardened and TemperedStainless Steel material and provided with Hook Rule Attachment and drillpoint angle attachment. This scale is useful to check any external outerdimension 0 to 6 like a caliper. It can be separately used as a hook rule andalso to check drill point angle of 118. Drill Cutting length upto 5 can also bechecked. it can be used as a fixed snap gauge for checking outer dimensions.if required hook rule attachment can be removed by loosening the eccentricscrew. Metric graduated rule can also be made available.
This gauge is made of aluminum material. It Accurately sets Turning, Boring &Facing Tools on the Centerline of the work piece. All edges of the ToolsSetting Gauge V- body are accurately machined and may be used for vialcalibration to suit your intended use. The Vial body may be positioned oneither side of the V-body for easier use in different applications. This tool isalso used to set up grinding wheel on centerline of tooth rest for cuttergrinding. It is also used to set table stops on horizontal mills. The gauges canbe used to set the bed at different angles. (0to 60in increments of 15)
This gauge is made of hardened & tempered stainless steelmaterial 0.5 mm thickness. This is a very handy tool used tomeasure the Gear Diametrical Pitch for 14.5pressure angle(Tooth profile - Involute type) This gauge has 14 Blades dulyfine edge profiled, Numbered pitch sizes are mentioned oneach blade. it is very useful gauge for all gear manufacturersfor inspection purpose. it is packed in a plastic box with gear
data sheet (DP, CP, Tooth Thickness Data) provided forinstant reference.
Range: 6 to 80 DP. (22 Pitches) Available in :-1) Diametral Pitch2) Metric Module Pitch (At 20Pressure Angle)
This nickle plated feeler gauge holder provides a convenient means of holding a single feeler strip orleaves of thickness (feeler) gauge. The camlock gripping permits every bit of stock to be used .
Double end model can also be made available which can be used to hold GO & NOGO thicknessgauges.
Range: 0.025 to 0.635 mm thick feeler gauge can be held, gauge blade width upto 12.7 mm. (0.5)
MODEL SEFGH SINGLE END FEELER GAUGE HOLDER
GEAR TOOTH PITCH GAUGE
MODEL HRDPG HOOK RULE CUM DRILL POINT GAUGE ASSEMBLY
MODEL DCTSG DELUXE CNC TOOL SETTING GAUGE WITH ANGLE SCALE
RR
MODEL GTPGGTPG- M
-
8/2/2019 Kristeel Catalouge
25/42
-
8/2/2019 Kristeel Catalouge
26/42
www.kristeel.com
ISO 9001-2008
R
2/18
www.kristeel.com
MODEL CFA CENTER FINDER ASSEMBLY
MODEL RTR REFERENCE TABLE WITH RULE
MODEL 1512-26L RADIUS GAUGE 26 PC SET (0.5MM TO 13 MM)
This Hard Chrome Plated Setting gauge is useful in Workshopfor Drilling on round bar or pipe exactly at the Center of the workpiece. The shank of 9.5mm dia & the flexible bracket makes thegauge more user friendly & easy to use.
Range: upto 6" Dia Shaft.
This is a Handy Reference Table cum 6"English Graduation Scale in which you canget quick Reference (size 32x180x1.Omm)for United Nation Coarse & fine threads Drillsizes. You can also measure Drill sizes forISO metric threads or American pipethreads. This is also useful for quickreference from fraction to decimaiconversions.
Least Count: 1/64".
This set is mainly used to check the radius of concave and convex portion of any radial part. Thisgauge is useful in workshops, general purpose, tool and die makers, woodworking industries,quality department etc. The gauge is packed in PVC pouch with brass handle to hold the leafwhile checking. The accuracy of the product is equivalent to international standards.
For additional models of radius gauge please turn to page 2/6.
Range: 0.5 mm to 13 mm- 26 leaves. (Incremental of 0.5 mm)
-
8/2/2019 Kristeel Catalouge
27/42
www.kristeel.com
ISO 9001-2008
R
2/19
www.kristeel.com
This rugged gauge is fabricated in stainless steel used to measure theimportant Dimensions of weld preparations & of completed Butt and filletwelds. It is intended for general fabrication work in the shop or on-site. Itrapidly measures Angle preparation (0to 60), Excess weld metal, Filletweld leg length, Throat length, Misalignment & hole sizes for butt weld,butt-weld reinforcement, General Linear Measurement upto 60mm or 2inches- Scales are graduated in metric units & supplied in a preventivecase with instruction leaflet.
For additional models of weld gauge please turn to page 2/8.
This rugged gauge fabricated in stainless steel, will measure theimportant dimensions of weld preparations & of completed butt and filletwelds. It is intended for general fabrication work in the shop or on-site andrapidly measures weld features like tolerance of convexity, tolerance ofreinforcement, concavity and underfil, to determine size of fillet weld. Thescales are graduated in metric units, It is packed in a protective case & aninstruction leaflet is provided.
This rugged gauge is fabricated in stainless steel & allows fast,accurate measurement of 11 fillet weld sizes: 1/8, 3/16, 1/4, 5/16, 3/8,7/16'/ , 5/8, 3/4, 7/8, and 1" and their metric equivalent. Also used to2determine weld size, either concave or convex. Each blade is made of1.25" x 4" cold rolled stainless steel to resist rust and bending. Theblades are deburred to remove rough edges. The set of seven blades ispacked in a handy 2" x 2.5" pocket case with the user manual attachedfor easy reference.
MODEL BCWG BRIDGE CAM TYPE WELD GAUGE
MODEL ATWG AUTOMATIC WELD GAUGE
MODEL LTWFG LEAF TYPE WELD FILLET GAUGE ( 7LEAVES)
-
8/2/2019 Kristeel Catalouge
28/42
www.kristeel.com
ISO 9001-2008
R
2/20
www.kristeel.com
This gauge is made of hardened and tempered stainlesssteel material having a range of 5to 90 incremental of 5(total 18 leaves). This gauge can be used to check internal &external angles of any machined part to check dovetailangle of shafts. It is one of the most useful gauges forgeneral purpose fabrication workshop. Tool & Die makers,wood working industry and the quality assurancedepartment to compare angle of any part. All 18 leaves arepacked in PVC Pouch.
Range: 5to 90- Incremental of 5(18 Leaves)
Available Models5to 90(18 Individual Leaves)1to 45(20 Individual Leaves)
This Polish Finish rugged gauge is made of stainless steelmaterial 0.8mm thick- This gauge is useful to spindle turner
& Wood workers for turning a workpiece to the desireddiameter, from 1/8" to 1". Wood workers will find many usesfor the gauge such as measuring the thickness of wood andplywood, checking the size of a Tenon and Dadocut or sizingcommercial Dowels. Each gauge is packed with printedcard in Blister.
Range: 1/8" to 1"
This Bore Gauge has 4 blades each marked with graduationof range 1/16" to 1 1/16". The gauge is used to measureinternal bore diameter of cylindrical objects.
For additional models of bore gauge please turn to page 2/6.
Lease count: 1/64"
MODEL STG SPINDLE TURNERS GAUGE
MODEL AG-18 PC ANGLE GAUGE - 5 TO 90 (18 PC SET)
MODEL 1511 D BORE GAUGE (4 LEAF)
-
8/2/2019 Kristeel Catalouge
29/42
ww.kristeel.com
The Rose Wood Tri-Square is the most important Tool incabinet making. It is very sensitive tool. This Tool isavailable in 4 sizes i.e. 3, 6, 9 and 12. The stock ismade of special Rose Wood along with Brass Fittings.These squares can be used to set up machinery, check
squareness of the cabinet and marking stock for joining.The permanently etched markings in 1/32 inchgraduation on chrome finish are very easy to read andappear on both ends.
This caliper is used by Wood Workers for checking bit &dowel sizes, material thickness etc. Made of Brass.Comes well packed in plastic pouch.
Used by Wood Workers and is available in any kind ofgraduations and in chrome finish. Use of the Hook at theend of these Rules facilitates measuring dimensions fromthe edge of the board. These rules have 4 differentmeasurement i.e. 1 / 8, 1 / 16, 1 / 32 & 1 / 64.The lengthof the Hook is adjustable for easy measurement
This handsome miter square comes with a stainlesssteel blade. and rosewood-brass base .This tool is used forsetting or checking 45 degree angles in projects such aspicture frames.
ISO 9001-2008
R
3/1
-
8/2/2019 Kristeel Catalouge
30/42
These miniature planes are ideal for small scale work.They consist of Rosewood, brass sides and carbon steelblades. Knurled brass adjustment screw are alsoprovided for blade adjustments. The planes can besupplied in three different designs namely,1)Block Plane2)Bullnose Rabbet Plane3)Scraping Palne
These Dovetail Squares are made of Steel (ChromePlated) and have a stock made of Rose Wood.They canbe provided to customer in various ratios as per theirrequirement. Ideal Dovetail Ratios are 1:6 & 1:8. Theyare basically used for marking Dovetails and 90 degreeangles.
Mini Sliding Bevel is made with select Rose Wood, SolidBrass and Stainless Steel. This product is also providedwith quick release lock mechanism and is available indifferent sizes. The Blade is rust proof with dull chromefinish.
ww.kristeel.com
MINI TORPEDO LEVEL
MINI SLIDING BEVEL
DOVETAIL SQUARE
The Mini Torpedo Level comes to you in aspecially designed Rose Wood Base with BrassFittings. Used extensively by Wood Workers andalso as Hobby Tools. Its size measures 105 mmLength, 18 mm Width and 27 mm Height .
MINI ROSEWOOD PLANES
ISO 9001-2008
R
3/2
-
8/2/2019 Kristeel Catalouge
31/42
R
I S O 9 0 0 1 - 2 0 0 0
ww.kristeel.com
The Iron Jack Plane is an excellent Tool for planing woodand for providing uniformity to any wooden surface.Sanding, Oiling, Waxing and Varnishing Obscure woods
natural beauty. Planing on the other hands bring out itsbeauty. These Planes are also used for leveling highlyfigured wood surface and veneers. The Blade is firmlyclamped in the body of the Tool.
The Block Plane is excellent Tools for planing wood andfor providing uniformity to any wooden surface. Sanding,Oiling, Waxing and Varnishing Obscure woods naturalbeauty. Planing on the other hands bring out its beauty.These Planes are also used for leveling highly figuredwood surface and veneers. The Blade is firmly clampedin the body of the Tool
Every wood worker appreciate the value of this Tool.Simply place this tool at the end of round piece of woodand mark two different dimensions as shown in thephotograph. The Brass Finder is 130 mm long and canbe used for a maximum diameter of 220 mm.
The Bevel Gauge is an indispensable measuringtool for checking Bevel Gauges i.e. 12 Angles (15degrees to 120 degrees). It can be used extensivelyby Wood workers.
IRON JACK PLANE
BLOCK PLANE
BRASS CENTRE FINDER
BEVEL GAUGE
ISO 9001-2008
R
3/3
-
8/2/2019 Kristeel Catalouge
32/42
ww.kristeel.com
WOODEN SCRATCH AWL
SLIDING BEVEL
WOODEN SCRAPER HOLDER
WOODEN SCRAPERS BLADE SET
The scratch awl is used to make any kind of marking &layout on wood. It has a 3" long rose wood handle withtwo flats. The high carbon steel blade dose not dullquickly & is hardened to very high RC.
The sliding bevel have a stainless still blade & is used tomeasure angles. It is available in two different sizes i.e.with 6" & 8" blade.
It is an ideal tool used for scraping the wood by puttingthe blade in the sc raper holder. A centrally threaded nobis provided for fastening the blade.
This set of blades are sharpened properly so that theyare capable of removing the finest shavings & thus leavea smoother surface finish.
Available in 4 piece sets : square 150 x 150 mm, convex/concave 150 x 50mm, barrel shaped 140 x 70 mm,gooseneck 130 x 70 mm.
ISO 9001-2008
R
3/4
-
8/2/2019 Kristeel Catalouge
33/42
ww.kristeel.com
POINTED TIP TWEEZER
It has a length of 110 mm. This high qualityTweezers is made of Stainless Steel for technicalapplications.
DIAMOND GAUGE
This is a classic tool, which is used by Watch Makers andJewellers for measuring small components quicklyand accurately. Its fine points allow high precisionmeasurements. Spring-loaded re-coil effectfacilitates one-handed use. This Gauge comes witha Brass Scale.
This Drill comes within overall length of 190 mm andis used for making fine holes having diameter 0-1mm, it also have four jaw chuck and a metal handle.
JEWELLER'S DRILL
ROUND TIP TWEEZER
The Round Tip Tweezers has a length of 110 mm. Itis high quality Tweezers made of Stainless Steeland used for technical applications. It has a curveddesign.
ISO 9001-2008
R
4/1
-
8/2/2019 Kristeel Catalouge
34/42
ww.kristeel.com
ASSEMBLY TWEEZER
115 MM SHAFT, MINI
HAND WISE WITH NARROW JAW
REPLACE WICK
MINI CHISEL SET
The Mini Shaft measure 115 mm in length and used forshaft measurement
It has length of 160 mm. This is high quality Tweezersmade of Stainless Steel for technical applications.
This Wick is an attachment to the Glass Spirit Lamp and canalso be sold separately
The Mini Chisel Set made of Steel is used by all Jewellers forminiature Chiseling Operations.
It is provided with double-guided rods and has jaw heightof 20 mm. It has maximum opening of 15 mm and overalllength of 140 mm and width of 7.5 mm. This product is usedfor holding small Brass parts textured faces, knurledscrews and handles made of Steels.
ISO 9001-2008
R
4/2
-
8/2/2019 Kristeel Catalouge
35/42
ww.kristeel.com
HOOK & PICK SET
This Glass Spirit Lamp has a Wick adjusting attachmentand a Glass container having 120 ccm capacity, burningtime is 2-3 hours. This Lamp can be set upright or at an
angle due its polygonal base.
This Glass Spirit Lamp does not have a Wick adjustingattachment. It has a Glass container having 120 ccmcapacity, burning time is 2-3 hours.This Lamp can be setupright or at a angle due to polygonal base
Hook and Pick Set is a set of 6 Tools available in lengthranging from 130mm to 160mm. Stainless Steel dentalHook and Pick Set comes with fine needle point tips forpicking up, adjusting, marking and cleaning objects.
GLASS SPIRIT LAMP
ADJUSTABLE GLASS SPIRIT LAMP
ISO 9001-2008
R
4/3
-
8/2/2019 Kristeel Catalouge
36/42
ww.kristeel.com
It has a length of 130 mm and weighs approx 550 gms. Ithas a round and flat horn and is ideal for jewellerymanufacturing. It is made of forged Steel mounted on SolidIron Base.
It has a maximum opening of 30 mm and jaw width of 48mm with approx weight of 950 gms. It has a parallel wisefor clamping small objects. It can be rotated 360 degreesand locked into a position via its swivel base. It is madeof Cast Iron with Polished Jaws.
It is provided with double-guided rods and has jaw height of 15mm. It has maximum opening of 40 mm and overall length of130 mm and width of 38 mm. This product is used for holdingsmall Brass parts textured faces, knurled screws andhandles made of Steel.
MINIATURE ANVIL
MINIATURE WISE
HAND WISE WITH WIDE JAWS
ISO 9001-2008
R
4/4
-
8/2/2019 Kristeel Catalouge
37/42
ww.kristeel.com
STRAIGHT END SCRIBER
L SHAPED BLACKODISED SCRIBER
CHROME PLATED PEN SHAPED CARBIDE TIP SCRIBER
PEN SHAPED SCRIBER
This scriber made of chrome vanadium steel with knurledhandle. Diameter 8 mm. Replaceable points individuallypacked.Available size : 175 mm
This scriber made of chrome vanadium steel with knurledhandle. Diameter 8 mm. Straight/angled end individuallypacked.Available size : 250 mm
This scriber has a carbide tip with hexagonal handle.Diameter 6 mm, A pocket clip is provided & individuallypacked in PVC pouch.Available Size : 150 mm
This scriber has a carbide tip with hexagonal handle.Diameter 6 mm, A pocket clip is provided & individuallypacked in PVC pouch.
ISO 9001-2008
R
5/1
-
8/2/2019 Kristeel Catalouge
38/42
ww.kristeel.com
DIVIDER
DIVIDERS WITH PENCIL HOLDER
DIVIDERS WITH QUADRANT
Made of special steel, rivet hinge with hardened points.
D-1 5 0 1 5 0 mmD-2 0 0 2 0 0 mmD-2 5 0 2 5 0 mmD-3 0 0 3 0 0 mmD-4 0 0 4 0 0 mmD-5 0 0 5 0 0 mm
Made of special steel, hardened points with pencil holder.
DPH- 150 1 50 mmDPH- 200 2 00 mmDPH- 300 3 00 mm
Made of special steel, rivet hinge with hardened points.
DQ-150 150 mmDQ-200 200 mmDQ-250 250 mmDQ-300 300 mmDQ-400 400 mmDQ-500 500 mm
ISO 9001-2008
R
5/2
-
8/2/2019 Kristeel Catalouge
39/42
ww.kristeel.com
SPRING DIVIDER
INSIDE CALIPER
OUTSIDE CALIPER
CALIPERS
These dividers are harden points with an arrangement ofquick acting set screw. Each divider is individually packed.
S D- 1 2 5 1 2 5 mmS D- 1 5 0 1 5 0 mmS D- 2 0 0 2 0 0 mmS D- 2 5 0 2 5 0 mmS D- 3 0 0 3 0 0 mm
These calipers are harden points with an arrangement ofquick acting set screw. Each caliper is individually packed.
IC-1 2 5 1 2 5 mmIC-1 5 0 1 5 0 mmIC-2 0 0 2 0 0 mmIC-2 5 0 2 5 0 mmIC-3 0 0 3 0 0 mm
These calipers are harden points with an arrangement ofquick acting set screw. Each caliper is individually packed.
OC-1 2 5 1 2 5 mmOC-1 5 0 1 5 0 mmOC-2 0 0 2 0 0 mmOC-2 5 0 2 5 0 mmOC-3 0 0 3 0 0 mm
ISO 9001-2008
R
5/3
-
8/2/2019 Kristeel Catalouge
40/42
ww.kristeel.com
INSIDE CALIPER WITH RIVET
OUTSIDE CALIPER WITH RIVET
These are made of special steel & are hinged with a rivet.
OCR-150 150 mmOCR-200 200 mmOCR-250 250 mmOCR-300 300 mmOCR-400 400 mmOCR-500 500 mm
Made of special steel, rivet hinge & individually packed
ICR-15 0 150 mmICR-20 0 200 mmICR-25 0 250 mmICR-30 0 300 mmICR-400 400 mmICR-500 500 mm
PRECISION ENGINEERS KIT
The Precision kit includes handsomely packed 8precision gauges namely - 2pc combination try & metersquare, bore gauge, universal gauge, degreeprotractor-cum depth gauge, screw cutting gauge,radius gauge, round wire gauge and caliper gauge. Thekit serves every purpose of tool room/workshopoperations, right from measuring / marketing thickness,angles, depth, radius, length, bore, level, diameters etc.
ISO 9001-2008
R
5/4
-
8/2/2019 Kristeel Catalouge
41/42
www.kristeel.com
Beware! You may find Kristeel look alikes in the market being sold at cheaperthan market prices. A dealer may even fool you into believing that the cheap
price is due to a discount offered by the company.The next time you encounter such an offer, ascertain its genuinity.
Here's how you can do it.
Seal / Sticker on the flap.
Permanent, non peeling D hologram on each product.
Smooth edges
Conversion table attached on the reverse
A little prudence will therefore enable you to identify an original Kristeel productfrom a poor quality duplicate. And ensure that in the lure of a bargain, you do notend up spending much much more. Think of what a cheaper, poor qualitymeasuring tool can lead to. Frequent breakdowns, loss of vital man andmachine hours, delay in production leading to delay in delivery, cancelledorders and lowering of Company image.
So be prudent, Be alert. And don't get fooled!
-
8/2/2019 Kristeel Catalouge
42/42
Corporate Office:Krislon House, Saki Vihar Road, Saki Naka, Andheri (East), Mumbai - 400 072. INDIA
Tel : 0091-22-4225 6666 / 6613 / 6614 Fax : 0091-22-4225 6690