51Order toll-free 800-345-1178 hOtcOat pOwder cOating 53Order toll-free 800-345-1178 hOtcOat pOwder cOating

high-temp Silicone plugs and capsAssorted reusable Silicone Caps and Plugs. Prevent powder build-up in critical tolerance areas like threaded holes, studs and more. Silicone caps and plugs are reusable because cured powder rolls right off. These kits come in several configurations developed specifically for your needs. Cap sizes range from .040” to .295” ID. Plugs range in size from .062” to .896” dia. Each kit comes in its own handy case for easy storage and accessibility.58112 CapsandPlugs,250-Piece$75.9958041 CapsandPlugs,110-Piece$49.99*58113 CylindricalPlug,125-Piece$40.9958114 CapKit,125-Piece$40.9910078 TaperedPlugKit,30-Piece$21.99*

*Case not included

58112

dual-head 12” x 36” ir powder coating curing lamp

• Cures area up to 36” high x 36” wide! • Dual 6000 watt IR adjustable heads • Two 12” high by 36” wide lamps • 12” extension arms • 2” steel powder coated stand with four 4” locking casters. • 25’ power cord with 50 amp straight blade 220 VAC plug.

10590 DualHeadIRLampwithStand$1,399.99*

Single-head 12” x 36” ir powder coating curing lamp

• Cure area: 10” high x 30” wide • Adjustable tilt and rotating head • 6’ stand with wheels • 25’ long power cord with 50 amp straight blade 220 VAC plug

10680 InfraredCureSystem6000$849.99*10690 InfraredCureSystem6000with Dual-VoltageHotCoatGunStarterKit Orig.$1,019.98Save$79.99$939.99*

10027, 10115

43045

repair metal like new with Lab-metal®Perfect for powder coating (high-temp formula), this ready- to-use metal reinforced leveling agent can be drilled, buffed, or tapped and adheres to virtually any clean surface. No catalyst needed, so it’s easy to apply. Use the solvent to smooth the Lab-metal® to a glass-smooth surface to minimize sanding.10288Z Lab-metal,HighTemp 24oz.netwt$54.9910207Z Lab-metal,24oz.netwt.$29.9910208ZP Lab-metalSolvent, OnePint$13.9910289Z Lab-metal,20oz.Caulk$28.99

*Special shipping charges may apply

#10590 12” x 36” lamp(Dual-head shown)

Allow 2-3 weeks for delivery

Allow 2-3 weeks for delivery

Saveupto$95whenyoubuyacompleteGunandLampKit!

powder curing lamps save space, time, and money10” x 10” ir powder coating curing lamp

• Operates on 110 VAC, 15 amp circuit • Adjustable tilting head

10170 10”x10”CuringLamp$339.9910171 6’LampStand$89.9910180 10”x10”InfraredCureSystemwithLamp,6’Stand$429.9910190 10”x10”CureSystemwithLamp,Stand, andDual-VoltageHotCoatGunStarterKit Orig.$599.97Save$69.99$529.99

#10170 10” x 10” lamp

#10171 Stand

high-temp masking tapes Mask threads and close tolerance areas. Fiberglass tape rolls are 36 yards long.10027 HighTempTape,1/2”$16.9910115 HighTempTape,1”$24.99high-temp fiber-free tape Offers a finer parting line. 72’ long rolls.10421 HighTempBlueTapeKit, includesoneeachbelow Orig.$62.94Save$9.95$52.9921667 1/8”HighTempBlueTape$4.9921668 1/4”HighTempBlueTape$4.9921669 1/2”HighTempBlueTape$5.9921670 3/4”HighTempBlueTape$8.9921671 1”HighTempBlueTape$13.9921672 2”HighTempBlueTape$23.99

Stainless steel wire .041” stainless steel wire to hang parts during coating and curing.43045 Wire,1lb.Spool$15.99

10421

pocket ir thermometer Instant surface temperatures are achieved with this compact “point and shoot” pocket infrared thermometer. The IR sensor has a steel protective cap and the other end has a handy LED flashlight. Ideal for powder coating, painting, track temperatures and engine temperatures. Automatic shut-off conserves battery life. Batteries included. Temperature range -27°F to 230°F in Celsius and Fahrenheit.11895 PocketIRThermometer$29.99

Infrared thermometer

LED light

NEW anodize removerA safer way to strip anodizing from those valuable aluminum trim parts before polishing or powder coating. This water-based solution is applied by submersion or spray. Removes coating in as fast as 20 minutes.12582ZP AnodizeRemover, Quart$24.9912583ZP AnodizeRemover, Gallon$69.99