Download - Labour Welfare (Autosaved)
CHAPTER I
1.1 INTRODUCTION
MEANING OF WELFARE MEASURES:
Labour Welfare is a term which must necessarily be elastic, bearing a somewhat different
interpretation in one necessary country from another, according to the different social customs,
the degree of industrialization and educational level of the workers. Welfare means faring (or)
doing well. It is a comprehensive term, and refers to the physical, mental, moral and emotional
well-being of an individual.
Trade unions and governmental and non-governmental agencies. It is rather difficult to
define the term labour welfare precisely because of the relatively of the concept. Welfare
includes anything that is done for the comfort and improvement of employees and is provided
over and above the wages. Welfare helps in keeping the morale and motivation of the employees
high so as to retain the employees for longer duration. The welfare measures need not be in
monetary terms only but in any kind/forms,
DEFINITION OF WELFAREMEASURES:
According to the committee on labor welfare, welfare services should mean:
Such services, facilities, and amenities s adequate canteens, rest and recreation facilities,
sanitary and medical facilities, arrangements for travel to and from place of work, and for the
accommodation of workers employed at a distance from their homes;
Such other services amenities and facilities, including social security measures, as
contribute to the conditions under which workers are employed.
MAIN FEATURES:
1. It is the work which is usually undertaken within the promises (or) in the
Vicinity of the undertakings for the benefit of the employees and the members
of their families.
2. The purpose of providing welfare amenities is to bring about the development of
the whole personality of the worker –his social, psychological, economic,
Cultural and intellectual development to make him a good works. A good
citizen of a good member of the family.
SCOPE OF WELFARE WORK:
Conditions of work environment
Workers health services
Labor welfare programme
Labor ‘s economic welfare programme
General welfare wor
LABOR WELFARE ACTIVITIES UNDERTTAKEN BY THE ORGANISATIONS.
Certain facilities are provided at the site of work itself, such as subsidized
canteens, crèches, medical facilities.
Some facilities relate ti the economic needs of workers such as co-operative credit
societies, consumers co-operative stress, staff benefitfunds, the educational
assistance to worker’s children.
TYPES OF WELFARE ACTIVITIES:
1) Welfare measures inside the work place, and
2) Welfare measures outside the work place.
WELFARE MEASURES INSIDE THE WORKPLACE:
Conditions of the work environment
Conveniences
Worker’s health services
Women and child welfare
Worker’s Recreation
Employment follow-up
Economic services
Labour – management participation
Worker’s education
WELFARE MEASURES OUTSIDE THE WORKPLACE:
Housing – bachelors quarters. Family residences. according to types and
rooms.
Water, Sanitation, waste disposal.
Roads , lighting, parks, recreation playgrounds.
Schools, nursery, primary, secondary and high school.
LABOUR WELFARE PROVISIONS:
Chapter v of the act provides for welfare facilities. Specifically, the act provides for
adequately screened washing facilities for the use of male and female workers.
WELFARE FUNDS:
In order to provide welfare facilities to the workers employed in mica, iron- ore,
manganese – ore and beedi rolling, welfare funds have been established to supplement the efforts
of employers and the state governments under respective enactment. The funds have been
credited by levy of less on production, consumption (or) export of mineral, and in the case of
beedi rolling, on the number of sticks rolled. The funds are used to provide medical facilities,
housing, drinking water, schooling, recreative, and to forth.
APPROACHES TO LABOUR WELFARE:
Approaches to employee welfare refer to the beliefs and attitudes held by
agencies which provide welfare facilities. Some agencies provide welfare facilities inspired by
religious faith, others as a philanthropic duty and the like.
ADMINISTRATION OF WELFARE FACILITIES:
1) Welfare policy
2) Organization for welfare
3) Trend analysis
4) Opinion survey
The DISBURSED SCOPES, ITEMS AND RATIOS OF EMPLOYEES’ WELFARE
FUND:
The disbursed scopes, items and ratios of the employees' welfare fund are given in
accordance with Paragraph 1, Article 7 of Employees' Welfare Fund Act as follows:
The disbursed scopes and items:
WELFARE BENEFITS:
Wedding, funeral, bearing benefits for injury and disease, emergency aid and loan,
disaster assistance etc.
EDUCATIONAL GRAINTS:
Subsidies for employees' advanced study and educational fees for their children etc.
RECREATION ACTIVITIES:
Culture and health activities, group activities, tourism and recreation facilities etc.
OTHER WELFARE ITEMS:
Festival grants, interests subsidy for the housing loan, employees' deposit insurance,
purchasing house with employee deposit, child-care and spouse dependants subsidies, retired
employees' benefits and other benefits etc.
1.2 COMPANY PROFILE
Hi-Grade Shoe is the flagship of Sri Achariya Groups. It has started in the year 2003 the
company has export the uppers to Portugal, Italy etc., Since we have a good relationship with
customers we have grown and extending it to full shoes. The Strength of the growth is purely
based on the quality of the product. Organization has efficient workforce to satisfy the
customers in all aspects.
The Organization believe in systems and following international standards such as 5S, TEI, ITR,
ERP, Training Center etc.,
Our Founder and Managing Director Mr. K.S. Sivakkumar, a dynamic business man has started
this organization in the year 2003, Sri Achariya Group is growing up exponentially. Now the
group has three units currently engaged in activities ranging from leather processing to
producing finished shoes.
Our team comprises of qualified professionals and experienced technicians, whose average
experience is more the 15 years in the shoe industry. The entire team is quality conscious and our
emphasis is on customer satisfaction. We are giving importance to Customer and Quality. Our
collections are designed for and reflect the strong personality of an unconditional and well
determined people who’s looking for quality, purity, sophistication and simplicity.
Our Motto is “CUSTOMER SATISFACTION WITH QUALITY AND ON TIME
DELIVERY”.Our group has built up strong customer relations through confidence building
measures and an atmosphere of trust and friendship. Every customer is assured of full
confidentiality in terms of style, quality and price. We are always ready to comply with our
customer requirements in every aspect of factory set up, pre & post production matters including
sampling procedures, product standards, product safety, shipping, etc and labour-laws.
Some of the outstanding features of Sri Achariya Groups are:
a) More than 800 dedicated workers
b) Capability of making more than 3000 pairs per day
c) Eco Friendly
d) R & D Cell
e) Sample Division
Manufacturer of all kinds of leather for Indian & Global Market
Hi-tech Enterprises is very competent and have got proficient, accomplished skills with
experience in developing almost all types of finished leathers (from Raw to Finish) from all
materials like Cow, Buffalo, Goat and Sheep that are made by Indian leather industry. Because
of my unsurpassed knowledge and experience in sharing my views with well experienced
technical friends / colleagues who are excel in production with different tanneries and in
marketing MNC chemical company’s representatives for Indian leather industry. By
conducting various articles - trials regularly at consistent basis, we (Hi-tech Enterprises) have
acquired extensive and broad customer acceptability with good inter-personnel relationship,
outstanding and extraordinary customer contacts over the periods.
We have strong and well experienced technical team to support you in making enough
Articles in volume and value for all efforts & money that you are going to invest in leather
part. Good inter personnel skill oriented team to solve all your problems in leather. And
furthermore we have reputed well known MNC chemical manufacturing companies Agencies
with us.
1.6 REVIEW OF LITERATURE
LABOUR WELFARE:
Welfare includes anything that is done for the comfort and improvement of employees and is
provided over and above the wages. Welfare helps in keeping the morale and motivation of the
employees high so as to retain the employees for longer duration.
The welfare measures need not be in monetary terms only but in any kind/forms
Employee welfare includes monitoring of working conditions, creation of industrial harmony
through infrastructure for health, industrial relations and insurance against disease, accident and
unemployment for the workers and their families. Labor welfare entails all those activities of
employer, which are directed towards providing the employees with certain facilities and
services in addition to wages or salaries.
CONCEPT:
Labor Welfare may be viewed as a total concept, as a social concept, and a relative
concept. The total concept is a desirable state of existence involving the physical mental, moral
and emotional well-being.These four elements together constitute the structure of welfare, on
which its totality is based.
The social concept, welfare measures implies the welfare of man, his family and his
community. All of three aspect, are interralated and work together in a three- dimensional
approach.
The relative concept, of welfare implies that welfare is relative in times and place.
It is a dynamic and flexible concept and hence its meaning and content differ from time to time,
region to region, industry to industry and country to country, depending upon the value system,
level of educational, social customs, and degree of industrialization, and general standard of the
social- economic development of people. Labour welfare implies thw setting up of minimum
desirable standard and provides facilities like health, food,
clothing, housing, medical assistance, education, insurance, job security, recreation etc. such
facilities enable the worker and his family to lead a good work life, family life and social life.
Labor welfare also operates to neutralize the harmful effects of large-scale industrialization and
urbanization.
DEFINITION:
The oxford dictionary labor welfare as “efforts to make life with worth living for a
workmen” chamber’s dictionary defers welfare as “a state of facing (or) doing well freedom
from clamity enjoyment of health, prosperity, etc.
In the words of R.R.Hopkins, welfare is fundamentally as attitude of mind in the part of
management influencing the method which by management activities are undertaken obviously
the emphasis here is on the “attitude of mind”.
E.S proud definition welfare works as “voluntary efforts in the part of employers to
improve the existing industrial system and condition of thew employment in their own factories.
SOCIAL SECURITY
The connotation of the term”social security” varies from country to country with different
political ideologies.
Medical care
Sickness benefit
Unemployment
Old age
Employees injury
Family
Maternity
Invalidity
Survivor’s
In socialist countries, avowed goal is complete protection to every citizen form
the cradle to the ideologies.
Social security may be two types.
1) Social assistance under which the state finances the entire cost of the facilities and
benefits provided.
2) Social insurance, under the take organizes the facilities financed by contributions
from the workers and employees with (or) without a subsidy from the state.
Social security’s in India:
At present both types, at social securities schemes, all envogue in our country.
Among the social assistance scheme all the most employees.
The social insure mental, which has gained much under acceptance man the social
assists method.
APPRAISAL OF WELFARE SERVICES:
One of the main obstacles in the effective enforcement of the her provision of the
factories act has been the quantitative and qualitative in adequacy of the
inspection staff.
Women workers do not make use of crèche facilities either because they are
dissuaded by the management to bring their children with them (or) because they
have to face transport difficulties.
At present, the labor welfare officers is not able to enforce laws independently
because ha has to work under the pressure of management
STATUTORY WELFARE SCHEMES:
The statutory welfare schemes include the following provisions:
1. Drinking Water: At all the working places safe hygienic drinking water should be
provided.
2. Facilities for sitting: In every organization, especially factories, suitable seating
arrangements are to be provided.
3. First aid appliances: First aid appliances are to be provided and should be readily
assessable so that in case of any minor accident initial medication can be provided to the
needed employee.
4. Latrines and Urinals: A sufficient number of latrines and urinals are to be provided in
the office and factory premises and are also to be maintained in a neat and clean
condition.
5. Canteen facilities: Cafeteria or canteens are to be provided by the employer so as to
provide hygienic and nutritious food to the employees.
6. Spittoons: In every work place, such as ware houses, store places, in the dock area and
office premises spittoons are to be provided in convenient places and same are to be
maintained in a hygienic condition.
7. Lighting: Proper and sufficient lights are to be provided for employees so that they can
work safely during the night shifts.
8. Washing places: Adequate washing places such as bathrooms, wash basins with tap
and tap on the stand pipe are provided in the port area in the vicinity of the work places.
9. Changing rooms: Adequate changing rooms are to be provided for workers to change
their cloth in the factory area and office premises. Adequate lockers are also provided to
the workers to keep their clothes and belongings.
10. Rest rooms: Adequate numbers of restrooms are provided to the workers with
provisions of water supply, wash basins, toilets, bathrooms, etc.
NONSTATUTORYSCHEMES:
Many non statutory welfare schemes may include the following schemes:
1.Personal Health Care (Regular medical check-ups): Some of the companies provide the
facility for extensive health check-up
2.Flexi-time: The main objective of the flextime policy is to provide opportunity to employees
to work with flexible working schedules. Flexible work schedules are initiated by employees
and approved by management to meet business commitments while supporting employee
personal life needs
3.Employee Assistance Programs: Various assistant programs are arranged like external
counseling service so that employees or members of their immediate family can get counseling
on various matters.
4. Harassment Policy: To protect an employee from harassments of any kind, guidelines are
provided for proper action and also for protecting the aggrieved employee.
5.Maternity & Adoption Leave – Employees can avail maternity or adoption leaves. Paternity
leave policies have also been introduced by various companies.
6.Medi-claim Insurance Scheme: This insurance scheme provides adequate insurance
coverage of employees for expenses related to hospitalization due to illness, disease or injury
or pregnancy.
7.Employee Referral Scheme: In several companies employee referral scheme is
implemented to encourage employees to refer friends and relatives for employment in the
organization.
2.1 RESEARCH METHODOLOGY
INTRODUCTION
The purpose of the research methodology is to describe the research procedure includes the overall research design and collection method .this section is important because it is hard to discuss methodology with using technical term.
DEFINITION:
Research is simply the process of finding solution and to the problem after a through study and analysis of the situational factors.
"Research is thus an original contribution to the existing stock of knowledge making for its advancement ".
Research design data collection sampling technique tools for data analysis
Purpose of the study : descriptive study
Type of investment : casual study
Study setting : non-contrived
Sampling unit : Ambur
Sampling design : sampling size100
Sampling technique : non probability sampling
Sampling method : convinces sampling
Primary source : individual respondent
Secondary source : books and journals
Data collection method : personally administered questionnaire
RESEARCH DESIGN
A research design is the specification of method and procedure for acquiring the
information needed to structure or to solve problem .it is the overall operation pattern of
frame work of the project that stipulate procedures.
Descriptive research design
DESCRIPTIVE RESEARCH DESIGN
Descriptive research is contract to explorative research is market by the prior
formulation of specific question. The problem perhaps as a result of exploratory study,
before the project is initiated. He should b able to define clearly what he want to measure
and to step-up appropriate and specific means for measuring it.
2.2 DATA COLLECTION METHOD
There data was collected through
primary data secondary data
Primary data
Information as collected from the respondent through questionnaire by direct contact
Secondary data
sampling data was collected from the various books record and internet
Sampling plan
Sampling is used to collect data from limited numbers where as census is used for large numbering.
Sampling unit
The sampling unit comprises of the company Hi-Grade Shoes Ambur.
Sampling size
Sample size for the study is 100 employees
Sampling Techniques
The Researcher used probability sampling under that the stratified sampling as a sampling technique for the project.
Probability sampling
In probability samples, each member of the population has a knownnon-zero probability of being selected. Probability methods include randomsampling, systematic sampling, and stratified sampling.
Stratified sampling
Stratified samplingis commonly used probability method that is superior to random sampling because itreduces sampling error. A stratum is a subset of the population thatshares at least one common characteristic. The researcher firstidentifies the relevant stratums and their actual representation in thepopulation. Stratified sampling isoften used when one or more of the stratums in the population havea low incidence relative to the other stratums.
TOOLS FOR DATA ANALYSIS
Statistical tools were used to find inference between the variable and analyzing the results. The following tools are used.
Percentage analysis
Correlation
1. PERCENTAGE METHOD:
The percentage method was extensively used for findings various details. It is used for making comparison between two or more series of data. It can be generally calculated.
No. of respondents favorable
Percentage of Respondents = x 100
Total no. of respondents
2. PERCENTAGE ANALYSIS:
Percentage analysis refer to a special kind of ratio; percentages are used in making comparison between two more series of date percentage are used to describe the relationships.Formula:
% = d/n × 100
Where, d is the number of the respondents. n is the base of figure or the sample group.
CORRELATION: The correlation technique is useful in explaining the relationship between two or more variables. The degree of relationship between variable under consideration is measured by the use of correlation technique.Formula:
N∑dxdy - (∑dx) (∑dy)r = ___________________________________
√ N∑dx² - (∑dx) ² √ N∑dy² - (∑dy) ²
Where, N – number of paired observation X – Number of observation on one variable. Y – Number of observation on another variable.
1.3 OBJECTIVES OF THE STUDY
Labour welfare has the following objectives:
* To provide better life and health of the workers conditions in Hi-Grade Shoes Ambur
* To make the workers happy and satisfied.
* To relieve workers from industrial fatigue and to improve intellectual,
Cultural and material conditions of living of the workers.
* To welfare measures are in addition to regular wages and
other economic benefits available to workers due to legal provisions and
collective bargaining.
* To labor welfare schemes are flexible and ever-changing. New welfare
measures are added to the existing ones from time to time.
* To welfare measures may be introduced by the employers, government,
employees or by any social or charitable agency.
1.4 SCOPE OF THE STUDY
This project titled “a study on labour welfare measures in Hi-Grade Shoes Ambur”
The total workforce of the organization was around 1200
Consisting industrial workers, technicians, operators, office, staff,
Secretaries, field staff, technical executives and non- technical executives, Managers.
The corporation comprises six major production units viz., Mine-1, Mine-2,thermal
power station-1,thermal power station-2,expansion and
Almost all the officers are situated in the industrial promises, with a
sample size Of hundred respondents, who are employees of Hi-Grade Shoes
This study further will be useful for the orgin analyzing the perception
Or opinion of employees with respect to the welfare measures provided to them in Hi-
Grade Shoes.
1.5 LIMITATIONS OF THE STUDY
The sample size of the study, which consists of 100 employees, cannot be generalized and applied for general public.
Opinions are dynamic; hence, the results of the study based on these opinions are likely to differ
The above- mentioned study is carried out in only the particular company and so the observations and results are not applicable for any other companies.
The result also depend upon the integrity of respondents in giving true and fair opinion and their level of knowledge in the subject under study.
Data of similar companies were not available for comparison.
The workforce of the company is too large and hence all of them could not be contacted for views and opinions on the research topic