Download - Large Buildings - University of Alabama
ME 416/516
Large Buildings
ME 416/516
IntroductionWe’ll look at common features of commercial, industrial, and institutional buildings.We’ve already covered lighting, and we’ll spend next several weeks focusing on other energy-related aspects of large buildings: HVAC equipment, power and motors, boilers, steam...We’ll examine simplified ways to compute building energy usage and energy bills.We will focus on general energy aspects of large buildings plus HVAC systems.
ME 416/516
ASHRAE 90.1 and EPACTASHRAE Standard 90.1, "Energy Efficient Design of New Buildings Except Low- Rise Residential Buildings,” is a model energy code.Much of this standard is now incorporated into U.S. law governing minimum energy efficiency for new federal construction through the Energy Policy Act (EPACT) signed by President Bush in 1992, and is incorporated into the three building codes used in the U.S.EPACT is a huge, omnibus bill that covers many aspects of energy usage, e.g., buildings and alternative fueled vehicles.
ME 416/516
Principal Coverage of ASHRAE Standard 90.1
Electric powerLightingAuxiliary systems and equipmentBuilding envelopeHVAC systemsHVAC equipmentService water heating systems and equipmentEnergy management
ME 416/516
Electrical OverviewThe distribution, metering, transformation and direct conversion of electricity to mechanical power (motors) is covered.Power shall be distributed so that individual customers are independently metered and so that the main categories of power use for individual customers are capable of being independently metered.Transformer selection optimized with respect to energy and economics (if customer owned).
ME 416/516
Commercial Power Meter
ME 416/516
Electrical Systems (Cont’d)Electric motors must meet specific efficiency standards depending on their rated power.Motors shall not be excessively oversized (efficiency drops off significantly at part loads).Variable speed motors will be used where practical (better part-load efficiency).Although power factor is not specifically addressed Standard 90.1, achieving high PF makes good economic sense (and saves energy for the nation and utility, if not the customer).
ME 416/516
LightingLighting of interior and exterior spaces covered.90.1 prescribes lighting in W/ft2 (electric power for lighting per ft2 of space) for various activities, which encourages high efficacy.Methods of lighting control are specified to turn off unused lighting.
ME 416/516
Auxiliary Systems and Equipment
Sets standards for:Elevators and escalatorsFreeze protection systemsRetail food and restaurant refrigeration
ME 416/516
HVAC Systems OverviewSpecifies load calculations; allowable indoor design conditions, outdoor conditions, calcu-lation procedures, and sizing proceduresEncourages zone control (different zones main-tained at different conditions). "Why heat whole building when only one area is occupied?"Sets ventilation air distribution requirements.Temperature controls: zone controls are to be used, range at least from 55 to 85ºF, automatic set-back is to be used.
ME 416/516
HVAC Cont’dHumidity control requirements are established.Ventilation: specifies minimum ventilation rates for various activities- e.g., bars with smoking (60 cfm) vs. offices (20 cfm); economizing.Materials and construction: pipe and duct insulation, requirements and specifications for duct leakage tests, etc.Energy recovery: e.g., recover heat during ventilation with air-to-air heat exchanger.Completion requirements: testing and balancing.
ME 416/516
HVAC Equipment
ASHRAE 90.1 sets more stringent requirements for energy efficiency for a broad range of equipment.
ME 416/516
Service Water HeatingRequirements, e.g., stand-by losses and minimum efficiencies, for water heating and hot water storage equipment are specified.Piping and tank insulation standards are provided.Maximum hot water flow rates in public restrooms are specified. Flows can be higher if self-closing valves are used.Use of waste heat, solar energy and thermal energy storage are encouraged.
ME 416/516
Two Methods of ComplianceSystem component method: simply use equipment efficiencies and systems design techniques that meet 90.1 standards.Building energy cost budget method: prove that the system design and proposed equipment result in a building energy operating cost that is less than the maximum set by Standard 90.1 (for the buildings specified size, activities, etc.).The system component method is simpler and requires less engineering brainpower and creativity...
ME 416/516
Building Envelope Issues
In many respects similar to residential building envelope issues. Focus is on:• Floors• Roofs• Opaque walls• Windows
ME 416/516
Differences between Large Buildings and Residences
Compared to homes, the primary difference with larger buildings is additional complexities:• Multiple stories• Varied roof designs• Many more wall construction materials• Varied window types• Variety of possible building occupation
patterns: 8 hours/day, 6 hours/week, 24 hours/day, etc.
ME 416/516
Skin-Load-Dominated Buildings
Tall, ThinBuildings
Climate and wall sunshadingdetermine relative importance of heating and cooling.Internal heat generation is minimal.Natural ventilation is easily accomplished.Plentiful window daylighting for most spaces.
ME 416/516
Skin-Load-Dominated Buildings
Short, ThinBuildings
Climate, roof exposure and wall sunshading determine relative importance of heating and cooling.Internal heat generation is minimal.Natural ventilation is easily accomplished.Plentiful window daylighting for lower floor(s) and skylightingfor upper floor.
ME 416/516
Internal-Load-Dominated Buildings
Roof, wall important…, but:Lights, equipment, people in central core generate heat: A/C is needed year-round.Window side lighting is limited to perimeter.Opportunities in winter to heat perimeter with waste core heat, cool core with cold outside air.
Tall, Thick Buildings
ME 416/516
Internal-Load-Dominated Buildings
Uncovered atrium aids venti-lation but admits more sun load to top floors.For very tall buildings, window lighting reduced for lower floors.Translucent atrium cover reduces overall lighting diffuses more to lower floors.Covered atrium conserves heat (Yankeeland); creates surplus internal heat gain over skin heat loss (Dixieland, Sunbelt)
Tall, Thick Atrium Buildings
ME 416/516
Internal-Load-Dominated Buildings
Envelope dominated by roof, floor.Internal loads of core require cooling all the time.Skylighting and rooftop ventilation available for upper floor, but increase roof HVAC load.
Short, Thick Buildings
Can use surplus core heat for perimeter in winter, and cool core with outside cold air.
ME 416/516
Using the Envelope for HVAC
Use of roof for heating:
Water absorbs heat to store until cold night
Sunlight heats interior through roof windows
ME 416/516
Using the Envelope for HVAC
Use of walls for heating
Trombe walls: glass with heavy wall
behind. Stores heat in day. Air circulates
over it at night to heat house.
South windows for heating with covers to shade
summer sun
ME 416/516
Using the Envelope for HVAC
Use of roof for ventilation
ME 416/516
Using the Envelope for HVAC
Use of walls for ventilationDon’t forget plain old windows!
Trombe wall as summer exhaust
Winter fresh air preheating through mini-solar collector
ME 416/516
Using the Envelope for HVAC
Ventilation of hot air
Roof “pond” (summer cooling)
using the roof for cooling
ME 416/516
Using the Envelope for HVAC
Inexpensive, fixed shading
of glazing
Use of walls to reduce cooling load
Awning
ME 416/516
Using the Envelope for HVAC
Use of roof for day-lighting
ME 416/516
Using the Envelope for HVAC
Use of walls for daylighting
Light shelf