0.5” Tooling BallReflector TBR
Prism in spherical housing withcollar for guaranteed precisemeasurements Applied for:– Static measurements– Automated inspection
0.5” Tooling BallReflector TBR
Prism in spherical housingwithout collar for wider accep-tance angle while tracking Applied for:– Static measurements– Automated inspection
Cateye
75 mm reflector in sphericalhousing with largest accep-tance angle Applied for:– Robot and machine
applications– dynamic and static
measurements
Surface Reflector
Plane mirror with beam-display-grid for easy alignment to beamBuilt-in CCR 1.5" Exchangeable pinpointand ruby ball styliHandle with safety cordApplied for:– Direct distance measurement
to surface (no offset)
0.5” Corner CubeReflector CCR
Air path corner cube inspherical housing with largeracceptance angleApplied for:– Static measurements– Automated inspection
Handle for TBRand CCR 0.5“
For convenient handling of reflectorsErgonomic gripMagnetic insert at tip
Mounting of reflector holder maybe straight or at right angle
Leica Laser Tracker - Making Metrology Mobile
Laser Tracker Accessories in All Dimensions
1.5” Corner CubeReflector CCR
Air path corner cube inspherical housingReplacement program forbroken reflectors availableApplied for:– Standard applications– Dynamic and static
measurements
Manipulator forTBR and CCR 0.5“
For convenienthandling in restricted spaceSmall, light weight Magnetic insert at tipDoes not roll on horizontalsurface due to hexagonal rim
0.5” Reflector forfixed installation RFI
Aluminum housing, blueanodizedApplied for:– Fixed installation– Repeatability test– Relative measurements– Deformation measurements
Leica Lanyardset for 1.5” CCR
For safe handling of 1.5” spherereflectorsEasy to mount with half circlegripAdjustable reflector directionwithin gripGrip with handle or lanyard
Customizedsupports
With and without shanks Various adapter sizesMagnetic insertFor flexible adaptationto measurement tasks
Please ask for separateinformation on supports
StandardReflector Kit
Carrying case for:
1x TBR 0.5” with collar3x Bird bath adapter for TBR 0.5"1x Corner Cube reflector CCR 1.5"1x Reflector Support for CCR 1.5"1x Handle for TBR 0.5”
Acceptance Angle and UsableSphere Surface
The reflectors have differ-ent clear acceptance anglesdue to their design. The ac-ceptance angle correspondsto twice the incidenceangle. Laser beams enter-ing prisms at an angle tothe center line cause dis-tance and lateral errors (seechart). Therefore the accep-tance angle is specified fora given positional accuracy.The collar on the TBR575770 prevents beams
Headquarter Leica Geosystems AG, Mönchmattweg 5, CH-5035 Unterentfelden, Switzerland, Phone +41 62 737 67 67, Fax +41 62 723 07 34, www.leica-geosystems.com/metrology
Regional Contacts The Americas, Phone +1 800 367 9453 Canada, Phone +1 416 497 2460 China, Phone +85 225 642 299 Germany, Phone +49 89 149810 0
France, Phone +33 1 30 09 17 00 India, Phone +91 124 5122222 Italy, Phone +39 02 52 53 51 Japan, Phone +81 3 5940 3050 Korea, Phone +82 2 598 1919
Spain, Phone +34 93 494 9440 United Kingdom, Phone +44 190 825 6500 Scandinavia, Phone +46 31 340 99 55 Singapore, Phone +65 776 9309
Dealers and Distributors Phone +41 62 737 67 67
Art No Type Diameter Material Max. Acceptance Usable sphere Centering Shape ADM distance Weightof ball of sphere angle surface of optics offset
573 510 CER, Cateye reflector 75 mm steel, ≤ ± 60˚ 230˚ ≤ ± 0.01 mm ≤ 0.01 mm 59.11 mm 730 g± 0.05 mm surface ± 0.03 mm 25.7 oz
For dynamic use hardened
575 829 CCR, air path 1.5" stainless ≤ ± 30˚ 278˚, no holes ≤ ± 0.01 mm ≤ 0.005 mm 0 mm 170 g38.1 mm steel, or flat spots ± 0.01 mm 6.0 oz
For dynamic use ± 0.01 mm surfacehardened
575 769 TBR without collar, 0.5" steel, ≤ ± 50˚, up 262˚, possible ≤ ± 0.01 mm ≤ 0.01 mm 5.3 mm 5 gprism 12.7 mm surface to 15˚ error restriction due ± 0.03 mm 0.18 oz
For static use ± 0.01 mm hardened ≤ 0.01 mm to flat spots
575 770 TBR with collar, 0.5" steel, ≤ ± 22˚, up 262˚, possible ≤ ± 0.01 mm ≤ 0.01 mm 5.3 mm 5 gprism 12.7 mm surface to 15˚ error restriction due ± 0.03 mm 0.18 oz
For static use ± 0.01 mm hardened ≤ 0.01 mm to collar
575 759 CCR, air path 0.5" steel, ≤ ± 30˚ 262˚, possible ≤ ± 0.01 mm ≤ 0.01 mm 0 mm 5 gFor static use 12.7 mm surface restriction due ± 0.01 mm 0.18 oz
± 0.01 mm hardened to flat spots
575 848 Reflector for fixed 0.5" Aluminium, ≤ ± 50˚ (262˚) n.a. n.a. 5.3 mm 4 ginstallation, prism surface blue n.a. 0.14 oz
For static use anodized(Package of 5)
All reflectors are optimized for measurements with absolute distance meter ADM
n.a. = not applicable
7325
31 –
IX.
2002
D
escr
iptio
ns a
nd te
chni
cal d
ata
are
not b
indi
ng a
nd m
ay b
e ch
ange
d w
ithou
t not
ice.
New Perspectives in Reliable Precision
Leica Surface Reflector
· A Titanium made Surface Reflectormeasures deep locations with a40 mm stand off with significantlyincreased thermal stability.
· Beam display grid prevents opera-tor from breaking the beam, whichincreases ease of use andproductivity.
· Compatible with absolute distancemeter: Optics of surface reflectorare equipped with Leica ADM com-patible optical coating, whichensures highest accuracy.
entering the prism at anangle of > 22˚.The Cateye offers thewidest acceptance angleand avoids distance errorsdue to its optical lay out.Also air path or hollowcorner cube reflectors donot exhibit any deflectionas the rays do not pass aglass body.
In order to have a large in-clination range of the re-flector without breaking thebeam too early, the usablesphere surface should be
-0.1
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0˚ 5˚ 10˚ 15˚ 20˚ 25˚ 30˚ 35˚ 40˚ 45˚ 50˚
Devia
tio
n [
mm
]
Incidence angle
Rest
rict
ion
thro
ugh
colla
r
TBR: lateral deviation
TBR: distancedeviation
CCR 0.5": lateral or distance deviation
Deviations in Relation to Incidence Angle
The different ranges for both criteria are shown in the drawing
Construction Details and Specifications of Leica Surface Reflector
Acceptance Angle 40˚
Minimum Beam Angle to object surface 10˚
Probe tip standoff 40 mm (1.6”)
Point accuracy
– stylus with ruby ball < ± 0.020 mm (0.0008”)
– stylus with pinpointorthogonal < ± 0.020 mm (0.0008”)inclined up to < ± 0.20 mm (0.008”)
depending on size of inclination
Reproducibility ± 0.015 mm (± 0.0006”)
Size 11 x 7 x 7.7 cm (4.3 x 2.7 x 3.0”)
Weight 535 g (18.9 oz)
Mirror coating optimized for Leica Tracker ADM
Interchangeable styli 3 mm (0.12”) ruby ballhardened pinpoint
Material of styli hardened steel, stainless
CenterlineIncidenceangle
Usable sphere surface
large. This situation has beenoptimized with the CCR 1.5”.
Beam