Download - LCLS Longitudinal Feedback and Stability Requirements P. Emma LLRF Review November 23, 2005
P. EmmaP. Emma
LLRF MeetingLLRF Meeting [email protected]@SLAC.Stanford.edu23 Nov. 200523 Nov. 2005
1
LCLSLCLS Longitudinal Feedback Longitudinal Feedback and Stability Requirementsand Stability Requirements
P. EmmaP. EmmaLLRF ReviewLLRF Review
November 23, 2005November 23, 2005
LCLSLCLS
P. EmmaP. Emma
LLRF MeetingLLRF Meeting [email protected]@SLAC.Stanford.edu23 Nov. 200523 Nov. 2005
2
Critical Critical LCLSLCLS Accelerator Parameters Accelerator Parameters
Final energy 13.6 GeV (stable to Final energy 13.6 GeV (stable to 0.1%)0.1%)Final peak current 3.4 kA (stable to Final peak current 3.4 kA (stable to 12%12%))Transverse emittance 1.2 Transverse emittance 1.2 m (stable to 5%)m (stable to 5%)Final energy spread 10Final energy spread 1044 (stable to 10%) (stable to 10%)Bunch arrival time (stable to 150 fs)Bunch arrival time (stable to 150 fs)
(stability specifications quoted as rms)(stability specifications quoted as rms)
P. EmmaP. Emma
LLRF MeetingLLRF Meeting [email protected]@SLAC.Stanford.edu23 Nov. 200523 Nov. 2005
3
FEL Power Sensitivity to FEL Power Sensitivity to ee Beam Beam
12% 12% IIpkpk//IIpkpk 20% 20% PP//PP
0.1% 0.1% EE//EE 0.2% 0.2% rr//rr
P. EmmaP. Emma
LLRF MeetingLLRF Meeting [email protected]@SLAC.Stanford.edu23 Nov. 200523 Nov. 2005
4
Electron Bunch CompressionElectron Bunch Compression
zz
VV = = VV00sin(sin(kzkz))
RF AcceleratingRF AcceleratingVoltageVoltage
zz = = RR5656
Path-Length Energy-Path-Length Energy-Dependent BeamlineDependent Beamline
zz
ii
zz
‘‘chirp’chirp’zzii
under-under-compressioncompression
zz
P. EmmaP. Emma
LLRF MeetingLLRF Meeting [email protected]@SLAC.Stanford.edu23 Nov. 200523 Nov. 2005
5
Compression StabilityCompression Stability
RF phase jitter becomes bunch length jitter…RF phase jitter becomes bunch length jitter…
Compression factor:Compression factor:
zz
P. EmmaP. Emma
LLRF MeetingLLRF Meeting [email protected]@SLAC.Stanford.edu23 Nov. 200523 Nov. 2005
6
Phase and Bunch Length Stability Example (not LCLS)Phase and Bunch Length Stability Example (not LCLS)
P. EmmaP. Emma
LLRF MeetingLLRF Meeting [email protected]@SLAC.Stanford.edu23 Nov. 200523 Nov. 2005
7
Machine Schematic with ParametersMachine Schematic with Parameters
SLAC linac tunnelSLAC linac tunnel research yardresearch yard
Linac-0Linac-0L L =6 m=6 m
Linac-1Linac-1L L 9 m9 m
rf rf 25°25°
Linac-2Linac-2L L 330 m330 mrf rf 41°41°
Linac-3Linac-3L L 550 m550 mrf rf 0° 0°
BC1BC1L L 6 m6 m
RR5656 39 mm39 mm
BC2BC2L L 22 m22 m
RR5656 25 mm25 mm LTULTUL L =275 m=275 mRR56 56 0 0
DL1DL1L L 12 m12 mRR56 56 0 0
undulatorundulatorL L =130 m=130 m
6 MeV6 MeVz z 0.83 mm 0.83 mm 0.05 %0.05 %
135 MeV135 MeVz z 0.83 mm 0.83 mm 0.10 %0.10 %
250 MeV250 MeVz z 0.19 mm 0.19 mm 1.6 %1.6 %
4.30 GeV4.30 GeVz z 0.022 mm 0.022 mm 0.71 %0.71 %
13.6 GeV13.6 GeVz z 0.022 mm 0.022 mm 0.01 %0.01 %
...existing linac...existing linac
223-m3-m
rfrfgungun
21-1b21-1b21-1d21-1d XX
Linac-Linac-XXL L =0.6 m=0.6 mrfrf= =
21-3b21-3b24-6d24-6d
25-1a25-1a30-8c30-8c
1 klystron1 klystron 26 klystrons26 klystrons 45 klystrons45 klystrons3 klystrons3 klystrons1 X-klys.1 X-klys.
P. EmmaP. Emma
LLRF MeetingLLRF Meeting [email protected]@SLAC.Stanford.edu23 Nov. 200523 Nov. 2005
8
Correlated or Uncorrelated Errors?Correlated or Uncorrelated Errors?
Suppose the mean RF phase of all 26 Linac-2 klystrons Suppose the mean RF phase of all 26 Linac-2 klystrons changes by: changes by: 0.210.21° ° | |pkpkpkpk| | 12% 12%
This may arise statistically with 26 random uncorrelated This may arise statistically with 26 random uncorrelated phase errors with rms spread of: phase errors with rms spread of: 221/21/2 = 0.21 = 0.21°°26261/21/2 = 1.07 = 1.07°°, , oror with 26 identical phase with 26 identical phase errors.errors.
Since we don’t fully understand the correlations, we choose Since we don’t fully understand the correlations, we choose the conservative (smallest) tolerance of the conservative (smallest) tolerance of 0.21° rms/klys.0.21° rms/klys. and and then reduce this by then reduce this by ~~NN, where , where NN ( (=12=12) is the number of ) is the number of major error sources.major error sources.
P. EmmaP. Emma
LLRF MeetingLLRF Meeting [email protected]@SLAC.Stanford.edu23 Nov. 200523 Nov. 2005
9
Phase, Amplitude, and Charge Phase, Amplitude, and Charge SensitivitiesSensitivities
parameterparameterEE//EE00| = | =
0.1%0.1%II//II00| = 12%| = 12% ttff| = 100 fs| = 100 fs unitunit
ttii 1.61.6 4.44.4 1.51.5 psecpsec
QQQQ00 4646 5.25.2 2424 %%
00 3.53.5 0.650.65 5.95.9 deg-Sdeg-S
VV00//VV00 0.320.32 0.240.24 0.950.95 %%
11 0.320.32 0.170.17 1.01.0 deg-Sdeg-S
VV11//VV11 0.290.29 0.250.25 0.780.78 %%
XX 5.55.5 1.41.4 7.67.6 deg-Xdeg-X
VVXX//VVXX 2.02.0 1.21.2 6.36.3 %%
22 0.540.54 0.210.21 0.0840.084 deg-Sdeg-S
VV22//VV22 1.11.1 1.01.0 0.130.13 %%
33 0.350.35 24.824.8 1515 deg-Sdeg-S
VV33//VV33 0.150.15 5.75.7 8.68.6 %%
P. EmmaP. Emma
LLRF MeetingLLRF Meeting [email protected]@SLAC.Stanford.edu23 Nov. 200523 Nov. 2005
10
Longitudinal Fast-Jitter Tolerance Longitudinal Fast-Jitter Tolerance BudgetBudget
X-bandX-band XX--
0.500.50
mean phase of mean phase of 4545 klys. klys.
mean amp. of mean amp. of 4545 klys. klys.
mean phase of mean phase of 2626 klys. klys.
mean amp. of mean amp. of 2626 klys. klys.
11 X-klys. X-klys.
11 X-klys. X-klys.
11 klys. klys.
11 klys. klys.
mean phase of mean phase of 22 klys. klys.
mean amp. of mean amp. of 22 klys. klys.
tolerances are rms valuestolerances are rms values
laser timing (w.r.t. RF) laser timing (w.r.t. RF) laser energy laser energy
P. EmmaP. Emma
LLRF MeetingLLRF Meeting [email protected]@SLAC.Stanford.edu23 Nov. 200523 Nov. 2005
11
Jitter Simulations (Particle Tracking)Jitter Simulations (Particle Tracking)
PPoutout
LLgg0.09% 0.09% 0.004% 0.004%
96 fs 96 fs
10% 10%
P. EmmaP. Emma
LLRF MeetingLLRF Meeting [email protected]@SLAC.Stanford.edu23 Nov. 200523 Nov. 2005
12
LCLSLCLS LongitudinalLongitudinal Beam-Based Feedback Beam-Based Feedback
L0L0
gungun
L3L3L2L2XX
DL1DL1 BC1BC1 BC2BC2 DL2DL2L1L1
zz11
1111 VV11
zz22
2222 VV22
33
VV33
00VV00
J. Wu, et al., PAC’05, May 16-20, 2005, Knoxville, TN.J. Wu, et al., PAC’05, May 16-20, 2005, Knoxville, TN.
(stabilizes beam for jitter frequencies(stabilizes beam for jitter frequencies < 10 Hz @ 120-Hz < 10 Hz @ 120-Hz rep-rate) rep-rate)
BPMBPM
CSR detectorCSR detector
P. EmmaP. Emma
LLRF MeetingLLRF Meeting [email protected]@SLAC.Stanford.edu23 Nov. 200523 Nov. 2005
13
CSR Relative Bunch Length MonitorCSR Relative Bunch Length Monitor
RedRed curve curve: : Gaussian Gaussian
BlackBlack curve curve: : UniformUniform
Blue curveBlue curve: : ‘Real’‘Real’
J. Wu, et al., PAC’05, May 16-20, 2005, Knoxville, TN.J. Wu, et al., PAC’05, May 16-20, 2005, Knoxville, TN.
P. EmmaP. Emma
LLRF MeetingLLRF Meeting [email protected]@SLAC.Stanford.edu23 Nov. 200523 Nov. 2005
14
LCLS Feedback Performance (use CSR LCLS Feedback Performance (use CSR PP//PP))
J. WuJ. Wu
II pkpk
// II pkpk00 (
%)
(%)
feedback feedback onon
% 09.0/ rmsEE
% 5.10/ rmsII
ps 16.0 rmst
feedback feedback offoff
(undulator entrance)(undulator entrance)
P. EmmaP. Emma
LLRF MeetingLLRF Meeting [email protected]@SLAC.Stanford.edu23 Nov. 200523 Nov. 2005
15
Feedback System Bode Plot at 120 HzFeedback System Bode Plot at 120 Hz
J. WuJ. Wu
Define fast-jitter as variations faster than Define fast-jitter as variations faster than 22 seconds secondsSlow drift occurs on time-scales > Slow drift occurs on time-scales > 22 seconds (to 24+ hr) seconds (to 24+ hr)
P. EmmaP. Emma
LLRF MeetingLLRF Meeting [email protected]@SLAC.Stanford.edu23 Nov. 200523 Nov. 2005
16
Slow Drift Tolerance LimitsSlow Drift Tolerance Limits
Gun-Laser TimingGun-Laser Timing 2.4*2.4* deg-Sdeg-SBunch ChargeBunch Charge 3.23.2 %%Gun RF PhaseGun RF Phase 2.32.3 deg-Sdeg-SGun Relative VoltageGun Relative Voltage 0.60.6 %%L0,1,X,2,3 RF Phase (approx.)L0,1,X,2,3 RF Phase (approx.) 55 deg-Sdeg-SL0,1,X,2,3 RF Voltage (approx.)L0,1,X,2,3 RF Voltage (approx.) 55 %%
(Top 4 rows for (Top 4 rows for // < 5%, bottom 4 limited by feedback dynamic range) < 5%, bottom 4 limited by feedback dynamic range)
* for synchronization, this tolerance might be set to * for synchronization, this tolerance might be set to 1 ps (without arrival-time measurement)1 ps (without arrival-time measurement)
(Tolerances are peak values, not rms)(Tolerances are peak values, not rms)
P. EmmaP. Emma
LLRF MeetingLLRF Meeting [email protected]@SLAC.Stanford.edu23 Nov. 200523 Nov. 2005
17
LX phase error LX phase error = 5= 5oo
L1 adjustment: phase L1 adjustment: phase 2.12.1oo, voltage , voltage 2.1%2.1%
xx (de
g)(d
eg)
x-band phasex-band phase
final energyfinal energy
final peak currentfinal peak current
final arrival timefinal arrival time
Compensate X-band Compensate X-band Phase Step Error...Phase Step Error...
J. WuJ. Wu
P. EmmaP. Emma
LLRF MeetingLLRF Meeting [email protected]@SLAC.Stanford.edu23 Nov. 200523 Nov. 2005
18
Gun Gun TimingTiming Jitter and Energy Feedback Jitter and Energy Feedback
tt
EE
EE = = EE00
tt00
without energy feedbackwithout energy feedback
ttff
tt
EE
EE = = EE00
tt00
withwith energy feedback energy feedback
EE > > EE00
ttff = = tt00