Le GRAND MACHO
1
Exploded View
Important! Before proceeding with installation, please check for the most up-to-date instructions at www.thermalright.com
Intel 775/1150/1151/1155/1156/1366
Heatsink Body Fan Clip
TY-147B
Screw Nut
Anti-Vibration Pads
Mounting Plate
M3L6 Screw
Anchoring Mount
Intel Washer (small)
Mylar FilmBackplate cap
Metal Back Plate
Motherboard
M3L10 Screw
The Ultimate Cooling Solutions! www.thermalright.com 2
Component
1
1
2
2
3
3
4 5 6
7 8
9
9
10
13
16 17
16 1715
11
14
12
12
14
131110
Le GRAND MACHO Heatsink Body ×1
Chill Factor III ×1 Screw driver ×115
AMD Washer (big) ×4
Mounting Plate ×1
Metal Back Plate ×1
M3 L10 Screw ×5
Anti-Vibration Pad ×4
Anchoring Mount ×1
Screw Nut ×4
Intel Washer (small) ×4M3 L6 Screw ×7
Backplate cap ×1
4 5 76 8
LGA2011 Type B Screw Pillars x4
Fan Clip ×2
TY-147B ×1 Mylar Film×1
3
Installation Instructions:
Step 1:
Step 2:
Step 3:
Step 1 : Backplate InstallationChoose the platform (775/1150/1151/1155/1156/1366) you are in use. Make four M3L10 Screw Pillars go through the Metal Back Plate and the Mylar film from bottom towards top.And then place the Metal Back Plate on the table. Put the four Washers (for Intel) around the Screw Pillars.
Step 2 : 775 Back Plate CapNote: When installing on a 775 platform, please first insert the Back Plate Cap into the opening on the Back plate, make sure you have the Cap facing downwards. (Only for LGA775 platform, all other platforms go directly to Step 3.).
Step 3 : Place the motherboard on top of the Back Plate. See the four Screw Pillars go through the four holes around the processor socket.Cap the four Screw Pillars with the four Screw Nuts.Make sure the side with a washer is facing the Back Plate.
1366775
115011551156
1 24
3
The Ultimate Cooling Solutions! www.thermalright.com 4
Step 4: Step 5:
Step 6:
Step 7:
Step 8:Step 9:
Step 8: Fan InstallationPut the fan clips into the dents on two sides of the heat-sink body and make the two ends of the fan clip go through holes on flange the TY-147B fan.
Step 5 : Apply the thermal pasteApply the thermal paste to the base of the Heatsink and the surface of the CPU evenly. (A flat edge, like a business card or an old credit card would be beneficial in spreading the thermal paste.)
Step 9 : Installation completedPlug in the fan connector to the CPU PWM Fan socket on the motherboard. Installation complete.
Step 6: Padding and Mounting Plate Installation Apply Anti-Vibration padding to 4 corners on the heat-sink.Place the Heatsink Body on top of the CPU. Make Mounting Plate go through the Heatsink Body. And then use the two M3L6 screws to secure the Mounting Plate, one side at a time in several turns to ensure balanced mounting.
Step 7: Easy Access Pass the supplied Screw Driver through the central hole of the Heatsink Body, for easier access to the M3L6 Screw underneath the cooler.
1 24
3
Step 4 : Anchoring Mount InstallationPlace the Anchoring Mount on the Screw Nuts. Use the four M3L6 Screws to fix the Anchoring Mount on to the Screw Nuts.
Le GRAND MACHO
5
Exploded View
Important! Before proceeding with installation, please check for the most up-to-date instructions at www.thermalright.com
Fan Clip
TY-147B
Mounting Plate
Anchoring Mount
LGA2011 Type B Screw Pillars
Anti-Vibration Pads
Heatsink Body
M3L6 Screw
Motherboard
Intel 2011/2011-3
Component
1
1
2
2
3
3
4 5 6
7 8
9
9
10
13
16 17
16 1715
11
14
12
12
14
131110
Screw driver ×115
AMD Washer (big) ×4
Mounting Plate ×1
Metal Back Plate ×1
M3 L10 Screw ×5
Anti-Vibration Pad ×4
Anchoring Mount ×1
Screw Nut ×4
Intel Washer (small) ×4M3 L6 Screw ×7
Backplate cap ×1
4 5 76 8
LGA2011 Type B Screw Pillars x4
Fan Clip ×2
TY-147B ×1 Mylar Film×1
Le GRAND MACHO Heatsink Body ×1
Chill Factor III ×1
7
Installation Instructions:
Step 1:
Step 2:
Step 3:
Step 1 : Screw Pillar InstallationPlace the motherboard (the processor installed) on top of the desk or a workbench. Fix the four included LGA2011 Type B Screw Pillars into the heat-sink studs on the Intel ILM Assembly Frame around the processor socket in a criss-cross pattern.
Step 2: Anchoring Mount InstallationPlace the Anchoring Mount on the Screw Pillars. Use the four M3L6 Screws to fix the Anchoring Mount on to the Screw Pillars, also in a criss-cross pattern to ensure balanced mounting.
1
1
2
2
4
4
3
3
Step 3 : Apply the thermal pasteApply the thermal paste to the base of the Heatsink and the surface of the CPU evenly. (A flat edge, like a business card or an old credit card would be beneficial in spreading the thermal paste.)
Le GRAND MACHO
The Ultimate Cooling Solutions! www.thermalright.com 8
Step 4:
Step 6: Step 7:
Step 5:
Step 6 : Fan InstallationPut the fan clips into the dents on two sides of the heat-sink body and make the two ends of the fan clip go through holes on flange the TY-147B fan.
Step 7: Installation completedPlug in the fan connector to the CPU PWM Fan socket on the motherboard. Installation complete.
Step 4: Padding and Mounting Plate InstallationApply Anti-Vibration padding to 4 corners on the heat-sink.Place the Heatsink Body on top of the CPU. MakeMounting Plate go through the Heatsink Body.And then use the two M3L6 screws to secure theMounting Plate, one side at a time in several turnsto ensure balanced mounting.
Step 5: Easy Access Pass the supplied Screw Driver through the central hole of the Heatsink Body, for easier access to the M3L6 Screw underneath the cooler.
Le GRAND MACHO
9
Exploded View
Important! Before proceeding with installation, please check for the most up-to-date instructions at www.thermalright.com
AM2/AM2+/AM3/AM3+/FM1
Fan Clip
TY-147B
Screw Nut
Anti-Vibration Pads
Mounting Plate
Anchoring Mount
AMD Washer (big)Back Plate Cap
Heatsink Body
M3L6 Screw
Metal Back Plate
Motherboard
M3L10 Screw
Mylar Film
Component
1
1
2
2
3
3
4 5 6
7 8
9
9
10
13
16 17
16 1715
11
14
12
12
14
131110
Screw driver ×115
AMD Washer (big) ×4
Mounting Plate ×1
Metal Back Plate ×1
M3 L10 Screw ×5
Anti-Vibration Pad ×4
Anchoring Mount ×1
Screw Nut ×4
Intel Washer (small) ×4M3 L6 Screw ×7
Backplate cap ×1
4 5 76 8
LGA2011 Type B Screw Pillars x4
Fan Clip ×2
TY-147B ×1 Mylar Film×1
Le GRAND MACHO Heatsink Body ×1
Chill Factor III ×1
11
Installation Instructions:
Step 1:
Step 2:
Step 3:
AMD
Step 1 : Backplate InstallationChoose the platform (AMD) you are in use. Make four M3L10 Screw Pillars go through the Metal Back Plate and the Mylar film from bottom towards top. And then place the Metal Back Plate on the table. Put the four Washers (for AMD) around the Screw Pillars.
Step 2 : Back Plate CapNote: When installing on an AMD platform, please first insert the Back Plate Cap into the opening on the Metal Back plate, make sure you have the Cap facing downwards.
Step 3 : Place the motherboard on top of the Back Plate. See the four Screw Pillars go through the four holes around the processor socket. Cap the four Screw Pillars with the four Screw Nuts in a criss-cross pattern.Make sure the side with a washer is facing the Back Plate.
12
3
4
The Ultimate Cooling Solutions! www.thermalright.com 12
Step 4:
Step 6:
Step 8: Step 9:
Step 5:
Step 7:
Step 4: Anchoring Mount InstallationPlace the Anchoring Mount on the Screw Nuts. Use the four M3L6 Screws to fix the Anchoring Mount on to the Screw Nuts.
Step 8 : Fan InstallationPut the fan clips into the dents on two sides of the heat-sink body and make the two ends of the fan clip go through holes on flange the TY-147B fan.
Step 5 : Applying Thermal PasteApply the Thermal Paste to the base of the Heatsink and the surface of the CPU evenly. (A flat edge, like a business card or an old credit card would be beneficial in spreading the thermal paste.)
Step 9 : Installation completedPlug in the fan connector to the CPU PWM Fan socket on the motherboard. Installation complete.
Step 6: Padding and Mounting Plate Installation Apply Anti-Vibration padding to 4 corners on the heat-sink.Place the Heatsink Body on top of the CPU. Make Mounting Plate go through the Heatsink Body. And then use the two M3L6 screws to secure the Mounting Plate, one side at a time in several turns to ensure balanced mounting.
Step 7: Easy Access Pass the supplied Screw Driver through the central hole of the Heatsink Body, for easier access to the M3L6 Screw underneath the cooler.
1 243
Le GRAND MACHO
13
Technical Spec
Heatsink Specifications:Dimension: Length 150mm x Width 120 x Height 159Weight: 960gHeatpipe: 6mm heatpipe*7unitsCopper Base: C1100 Pure copper nickel plated
Fan Specification:Dimension: L152mm x H140mm x W26.5mWeight: 160gFan speed: 300~1300RPM (4-Pin PWM)Fan noise: 14~20dBA MAX (4-Pin PWM)Airflow: 16.9~73.6CFM MAXConnector: 4 Pin (PWM Fan connector)
The Ultimate Cooling Solutions!
www.thermalright.comTEL: +886-2-2915-5005FAX: +886-2-2915-5123
EMAIL: [email protected]