8.55 hrs
1 pcs
f
0.20 mm
k
0.40 mm
h
1
84.00 g
d
MK3/S
Summary
Light bar for the Prusa i3 MK2/MK3 in single light, dual light, and MMU2compatible variants. Mounts attach to the hexagonal holes in the z-axistops. Mounts are designed to fit 9x17mm aluminum u-channel and have ahollow interior that is used to route the wires down the back of the printerframe for a clean look. Mount also includes an opening to insert a powerswitch. LED strip can be powered by the printer power supply. Use a 12V(MK2) or 24V (MK3) LED strip depending on which printer you have.
Purchase hardware kit here. If the kit is out of stock, check back in a fewdays.
Assembly instructions are on Thingiverse.
3D Printers > Other Accessories
mk3s mk3 mk2 lightbar light led
Required hardware: Aluminum u-channel 24V LED strip (MK3) 12V LEDstrip (MK2) Wire
SethBon
LED Light BarPrusa i3 MK2/MK3
VIEW IN BROWSER
updated 24. 11. 2019 | published 24. 11. 2019
Print Files (.gcode) DOWNLOAD ALL FILES
9.3 MB
8.55 hrs f 0.20 mm k 0.40 mm h PLA 83.60 g d MK3/S
updated 24. 11. 2019
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
30.0 KBupdated 24. 11. 2019
131.1 KBupdated 24. 11. 2019
37.7 KBupdated 24. 11. 2019
157.3 KBupdated 24. 11. 2019
22.9 KBupdated 24. 11. 2019
Optional hardware: Power switch Heat shrink tubing Brass inserts M3x5mm countersunk screws
Require Tools: Wire stripper Soldering tools Hacksaw Metal file (optional)
dual_mount_02mm_pla_mk3s_8h33m.gcode
single_mount.3mf
single_mount.stl
dual_mount.3mf
dual_mount.stl
left_mmu2_mount.3mf
82.8 KBupdated 24. 11. 2019
20.0 KBupdated 24. 11. 2019
72.5 KBupdated 24. 11. 2019
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution-NonCommercial
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition
left_mmu2_mount.stl
right_mmu2_mount.3mf
right_mmu2_mount.stl