GELighting
Night visionLED solutions for efficient outdoor lighting
LEDs provide big advantages for lighting users: low energy, long life and less environmental impact. For outdoor lighting, these benefits are particularly important and GE has developed a comprehensive range that enables users of outdoor lighting to make the most of the LED revolution. This guide shows the range and its benefits.
Taking LEDs outdoors
ContentsThe LED phenomenon 4
Facing the challenge 6
The four dimensions of LED efficiency 8
Optical 10
Design 12
Application 14
Environmental 16
Lighting all areas 18
Commercial areas 20
Road and tunnel 24
Residential and pedestrian areas 28
Product data 32
More about GE LEDs 34
GE Lighting was the original innovator of the first commercial LED in 1962 and today is one of the largest LED systems companies in the world, covering applications such as transportation, signage, outdoor area lighting, and retail display lighting. Its credits include more than 7.62 million metres of LED linear lighting with a warranty return rate of less than 0.05%.
Proof of our successIn the 2009 Lighting Design Award our Vio™ LED technology was recognised by the judges as ‘a major advance in colour stability’. GE also received ‘Best in Class’ awards in 2008 and 2009 at the Next Generation Luminaires competition sponsored by the US Department of Energy, for retail and outdoor LED products.
The LED phenomenon
4
Save energyLED light engines use 30-60% less energy than other light sources, with no loss of light output, which represents considerable cost savings as well as major reductions of greenhouse emissions. Furthermore, LED technology allows designers to create fittings that utilise light far more efficiently, delivering light uniformly and only where it is needed, with minimal glare.
Long lifeWith 50,000 hours of life, LEDs can last up to 4 times longer than other light sources, which means reduced maintenance costs. During the life of an LED luminaire a comparable metal halide fitting would be relamped four times. Electrical gear on an LED system may need servicing as little as once during this time.
Colour performanceLED light engines provide light quality that is second to none, with a CRI value of over 70 that yields high quality colour rendering. This enables realistic colours to be seen when objects are lit at night - a big advantage for architectural and security lighting. And, importantly, colour quality is maintained right to the end of the LED’s rated life.
EnvironmentLEDs require less material to manufacture them and their extended life means far less frequent replacement. And when it finally comes to disposal, the hazardous waste considerations of mercury-free LEDs are far fewer than with other light sources.
Light pollution is also greatly reduced, as the superior optics of LED fittings means light goes only where it is required. LEDs are also more controllable, with ‘instant on’ switching and dimmability.
5
As you would expect from an organisation with over a century of technological heritage, GE believes that the imaginative use of technology plays an important part in solving the environmental challenges that face the modern world.
GE has many technical innovations to its name and in the field of lighting these include the first incandescent lamp, fluorescent tube and halogen lamp.
There is no company better qualified to lead the lighting industry’s challenge to reduce environmental impact.
Facing the challenge
6
This philosophy is embodied in ecomaginationsm, GE’s initiative to create a better quality of life for all the world’s citizens and create long-lasting environmental solutions through the use of technology. ecomaginationsm is at the core of many of GE’s technologies and GE Lighting has made a major contribution with high efficiency products right across the range.
But there is more to it than efficiency. GE aims to produce products which have the least possible environmental impact during production and also when their useful life is finished. There is no better example of these qualities than the LED – conceived by GE in 1962. Efficient and exceptionally long lasting, it has no mercury content and presents a far lower risk for disposal and recycling than many other light sources.
7
The four dimensions of LED efficiency
The outdoor environment is complex and demanding for lighting. Not only are there the physical demands of weather and the city environment but outdoor luminaires must also perform as efficiently as possible to reduce energy use and keep publicly funded costs as low as can be achieved. Furthermore, outdoor lighting must provide a safe and secure night-time environment in cities that operate 24/7.
LED lighting, together with careful product engineering, is GE’s biggest ally in meeting these needs. It is a solution that has been developed on four levels – the four dimensions of LED efficiency.
1 2
3 4
8
Environmental efficiency
0
3000
6000
9000
12,000
15,000
HPS CMH MH MV
HPS CMH MH MVSite CO2
emission
per year
20
40
60
CO2 emission
saving /year
using LED
0.536 kg CO2 emitted per kWh
(European average from Eco-Invent)
Opticalefficiency
Design efficiency
Application efficiency
1 2
3 4
9
GE LED fixtures have carefully designed optics that ensure that light only goes where it is needed.
This reduces wastage and cuts down light pollution. In addition to the quality of the optics, GE also focuses on providing a wide choice of optics so that lighting designers can light many different types of application as efficiently as possible.
Optical
• Variety of light distributions
• Excellent cut-off
• Horizontal and vertical uniformity
• Unique reflector design
Standard optics GE LED optics - light only where it’s needed
1 2
3 4
10
The GE LED EngineAt the heart of GE’s high efficiency LED luminaires is GE’s unique LED Light Engine, an Optical Ring system in which LEDs and optics work together to provide lighting performance that is second to none. LEDs are placed precisely on the reflector surface in order to maximise the efficiency of the required light distribution, delivering light only where it is needed. A specially designed heat sink ensures that the efficiency of the system is maximised.
• Good, even, vertical illumination.
• Excellent method for meeting light trespass requirements.
• Maintains photometric patterns in the event of discreet LED failures.
• Allows customised photometric patterns, unlike refractive light optics.
• Avoids the need for silicon fillers inside individual lenses which are less reliable and require extra material cost.
• Reduces glare; the eye only sees light from the few LEDs pointing in the viewer’s direction.
Heat
Light
Heat sink
11
• Excellent thermal management
• Best-in-class LEDs
• Variety of shapes
• Variety of mounting options, eg post-top, wall-mount etc.
The award-winning designs of GE LED luminaires are efficient and future proof so that maintenance is minimal and updates can be easily performed.
They are also designed to be as flexible as possible in use so that the lighting needs of a complex site can be provided for by one product or product range.
1 2
3 4
• Easy maintenance and upgrades through LED engine replacement
• Award-winning designs
Design
12
Managing heatThe management of heat plays an important part in the performance of a luminaire. Heat sinks inside fittings, together with outer surface areas equipped with features such as heat fins, ensure that luminaires are as heat-efficient as possible. In addition, interior layout is always carefully planned by GE engineers to minimise heat build-up.
Post-top triplePost-top double PolePost-top
Ø60 Ø76
Wall Pendant
Designed flexibility
Ø60 Ø76 Ø60 Ø76
The GE Iberia LED luminaire has been designed to suit a wide range of installation configurations, including wall and pendant mounting. Lighting designers can meet all the needs of a project with one high efficiency LED range, for consistency of appearance and performance.
13
LED outdoor lighting systems from GE are designed as a long term commitment to efficiency and low maintenance.
By creating products that are versatile and have a wide range of applications, GE’s engineers ensure that they will deliver efficient service, wherever they are used. GE LED light sources enable the design of highly efficient optical systems that only light the desired area. The less precise control of larger, non-LED light sources often results in light spillage.
Also, the extreme long life of the LED light source – typically 50,000 hours - drastically reduces the time and cost of maintenance compared to other light sources.
• Variety of light sources
• Long life for low maintenance
• Light is distributed only where it is required
• Full compliance with EU standards
1 2
3 4
Application
14
46 different luminairesThe unique modular construction of the new LED Area Lighter enables it to be supplied in 46 different configurations of optics and light sources to cover every area lighting application.
LED modules
Single LED module
Double LED module
Lumens
Choice of lumen output from 31,300 to 14,800 lumens
Colour options
4000K
5700K
Light distributionSymmetric medium Symmetric short Asymmetric forward Asymmetric wide
Modular construction
15
While the efficiency of GE LED systems is paramount, they are conceived with the complete environmental audit trail in mind, including manufacturing and disposal.
The WEEE and RoHS directives place a responsibility on manufacturers to minimise the environmental impact of the construction and disposal of electrical products and among other things they address concerns about mercury entering the environment. GE LEDs contain no mercury or glass, which greatly reduces the burden of disposal or recycling.
1 2
3 4
Environmental
• Low energy consumption reduces carbon emissions
• Compliant with WEEE and RoHS
• Produced locally where possible to reduce carbon footprint
16
Reducing C02 emissions
0
3000
6000
9000
12,000
15,000
HPS CMH MH MV
HPS CMH MH MV
Site CO2 emission per year
20
40
60
CO2 emission saving /year using LED
0.536 kg CO2 emitted per kWh (European average from Eco-Invent)
Case study: lighting a new car park
Choosing GE’s LED Area Lighter to light a new 7600m2 car park enabled significant savings to be made in CO
2
emissions compared to HID technology.
Safe wasteGE LED luminaires contain no mercury and WEEE and RoHS considerations are paramount in their design.
Typical construction materials
GE LED luminaires typically contain these recyclable materials:
Brackets: aluminium 356-T6 Screen: THK Galvanised Steel Heat sink: 6061/6063 aluminium Lenses: Lexan 111 polycarbonate Housing: die cast aluminium B50WA50 Reflectors: Lexan 123 Screws: steel
LED light sources use up to 64% less energy than equivalent HID products, which translates into significant savings in CO
2 emissions from
the world’s power stations.
17
Residential and pedestrian areas
Road and tunnel
Commercial areas
18
Lighting all areas
19
Commercial areasFor creating beautiful night-time cities, GE LED fittings are the perfect choice. Their versatility makes them adaptable to many different situations, from car parks to architectural features and statues. LED Area Lighter, LED Floodlight and Tetra® Contour are great examples of this flexibility and functionality.
20
Tetra® ContourTetra® Contour is the modern flexible light source for architects and designers looking for a way to highlight architectural shapes.
With multiple colours to choose from, designers can create dramatic shapes and attractive accent lighting.
LED Area LighterGE’s new LED Area Lighter is perfect for site, area and general lighting.
Its optical ring design produces superior vertical illuminance and efficiently delivers the required amount of light for each application, without wasteful or irritating light spill into neighbouring areas.
LED FloodlightGE’s LED Floodlight uses LED technology and specialised optical designs to offer a truly flexible range, with minimal energy consumption, for use in creative architectural lighting, area floodlighting and sign illumination.
The LED Floodlight delivers uniform lighting with no hot spots and with improved lighting of upper areas of buildings.
• Die-cast aluminium IP65 housing
• 85% lumen maintenance at 50,000 hours
• Increased output efficiency and instant-on
• Modular design that provides 34 photometric combinations, in two colour temperatures - 4000K and 5700K (CRI 70)
• Solid state light source. Robust design, excellent vibration resistance
• Integral dimmable analogue driver
• Just 90W system consumption
• Three colour temperatures - 3000, 4300 and 6000K
• 5 different optical versions
• Advanced LED optical system
• Three mounting versions
• 2700, 3000, 3500, 4000, 5000 and 6500K CCT
• Red, Green, Blue colours
• Entirely flexible light engine
• With light guide, extra large viewing angle of 330° and IP66 rated
21
HID...
LED?or...
Location
7600m2 car park
Lighting parameters
Following European Standard requirements (CIE 13201)
• Eav: 15 lux• Uniformity (E
min/E
av) 0.4
• Classification CE3
In each case, lighting is optimised to fulfil the requirements.
Case study: lighting a new car park
22
0
3000
6000
9000
12,000
15,000
HPS CMHMH
MV
Site
CO
2 em
issi
on p
er y
ear*
LED
Measuring the savings
LED HPS CMH MH MV
Number of luminaires 12 12 12 14 14
Mounting height [m] 8 12 12 12 14
Efficiency [lux*m2/W] 57 50 41 34 22
Relamping in years 12.5 5 3.5 2 3.5
Site CO2 emission/year* 5014 7803 7803 9104 13,968
CO2 emission saving /year using LED – 35% 36% 45% 65%
Results:
• Initial investment:
With mercury and MH lamps: higher than using LED solutions
With HPS and CMH lamps: payback is less than 3 years
• Up to 64% lower CO2 emission
with LED
• Improved horizontal and vertical uniformity with LED
* 0.536 kg CO2 emitted per kWh
(European average from Eco-Invent)
Up to 45% energy saving using LED
23
LED Road R250
LED TunnelGE’s LED Tunnel luminaire is ideal for efficient lighting of low speed tunnels as well as underpasses, parking garages and industrial areas.
High performance optics and a high CRI light source create a safe environment for traffic with uniform light, greatly reduced dazzle and improved visibility. The long life of LEDs means an outstanding six year life.
The new LED Road R250 luminaire features an advanced LED optical system that provides improved horizontal and vertical uniformity, reduced glare and improved lighting control compared with traditional metal halide lighting systems.
It provides a 30-50% reduction in system energy consumption and an estimated service life of more than 10 years (50,000 hour rated life), which means low maintenance. Reduced glare improves safety and visual comfort.
• High efficiency to meet rigorous photometric requirements
• System rating 50,000 hours L80 to reduce maintenance
• White light with desirable colour temperature 6000K and 4000K with CRI 70 for visual comfort
• Integral dimmable analogue driver for remote monitoring and control• IP65 for both optical and gear compartment
• System consumption from 39W to 237W (scalable every 20W)
• Meets 2G vibration standards
• Only 90W system consumption
• CRI 70 and 5700K
• Hermetically sealed to IP66
• Choice of optics
• Die cast aluminium housing
• Integral dimmable analogue driver
24
Road and tunnelPhotometric performance and low maintenance are critical factors in designing lighting for traffic and GE’s LED light engine provides the perfect light source for making this happen.
GE’s LED Road and LED Tunnel fittings make full use of this technology.
25
Lighting parameters
System consumption
[W]
Lane Width [m]
Fixture Spacing
[m]
Height [m]
Luminance [cd/m2]
UL %Ti Eav (lx) Uo S [m2]
Lux/[W/m2]
Tunnel LED symmetric 952 8 7.5 5.5
2.96 0.87 11.83 43.33 0.67 60 27.37
PFE-400/SYM HPS150 170 4.19 0.9 4.86 80.79 0.78 60 28.35
Case study: urban tunnel
LED photometry means:
• Fewer lumens to meet the requirements
• Improved uniformity on the road and reduced hot spots on the walls
• Reduced site wattage
• Payback in less than 4 years
System life comparison
Light source HPS T5 Tunnel LED
Lumen / watt 110 86 100
Lamp life [h] 28,500 36,000 50,000
Relamping hours 20,000 36,000 0
LPD (W/m2)
Site wattage [W] 17,100 16,823 12,667
Energy cost @ €0.11/kWh 16,447 16,210 12,205
Lifetime site energy cost [€] 207,252 203,899 153,520
Maintenance
Maintenance cost/luminaire/year [€] 70 50 15
Annual site maintenance cost [€] 7000 16666 2000
Total site maintenance cost 88,045 209,631 25,155
Lifetime calculation
Lifetime maintenance cost [€] 88,045 209,631 25,155
Lifetime energy cost [€] 207,252 230,899 153,520
Total cost of ownership [€] 295,298 413,531 178,676
• 60km/h speed
• Length 1000m
• Follow European standard requirements (CIE 88 2004)
Measuring the savings
• Required luminance : 2.5cd/m2
• Required Uo: 0.4
• Required Ul: 0.6
26
1: ME3a compared with Euro-2 150W HPS 2: ME4a compared with Euro-2 150W CMH
ME4a
HPS
0
1000
2000
3000
4000
5000
6000
ME3a
CMH
Site
wat
tage
[W]
21
Case study: 2-lane roadway
Lighting parameters
• Road type: 1122m, 2 lanes, 4m width
• Luminaire layout: Unilateral
• Mounting height: 8m
• ME4a Class
• Lav
>=0.75cd/m2 Ul >=0.6 TI <=15Lux Uo >=0.4
Comparing light sources
Family Lamp Colour Temp.
[K]
System Wattage
[W]
Lumen output
luminaire efficiency
[lm/W]
Pole spacing
[m]
Pay-back
[years]
GE EURO-2 CMH 3000 171 14000 81.87 31
GE R250 LED 4300 100 6413 64.13 31 3.98
• Less than 4 years payback
• R250 allows for a retrofit with 4300K CCT
• R250 provides more than 40% energy saving versus CMH
LED R250 road light vs 150W CMH/HPS
• In both cases R250 provides more than 40% energy savings
• In both cases payback lower than 4 years
27
Residential and pedestrian areasThe lighting of public areas requires fittings that are aesthetically pleasing, as well as functional and efficient. Iberia and Duna incorporate GE’s state-of-the-art LEDs with appealing fitting designs that enhance where we live and work, and make them safe.
28
Duna LEDThe perfect combination of aesthetics and functionality, Duna LED is ideal for efficient lighting of residential areas, parks and gardens, commercial centres, pedestrian walkways and squares.
Duna LED is a decorative luminaire designed as an attractive truncated cone. It uses LED technology up to 88W with symmetrical and asymmetrical distributions.
Iberia LEDIberia LED combines a stylish design with
a wide range of different mounting options. It is a versatile luminaire suitable for
architectural and urban environments, as well as roadway lighting.
In wattages up to 90W, it has a choice of symmetrical and asymmetrical distribution. Coupled with the other options that are available, this makes Iberia LED a highly versatile luminaire for amenity lighting, pedestrian areas and squares.
• Integral dimmable analogue driver for remote monitoring and control• Symmetrical or asymmetrical distribution
• Die-cast aluminium housing
• Wide range of accessories
• 85% lumen maintenance at 50,000 hours
• Limited wattage up to 90W
• 5700 and 4100K
• LED technology up to 88W
• Symmetrical and asymmetrical distribution
• CRI 70, CCT 4100 and 5700K
• Die-cast aluminium housing
• Upper housing: one-piece spun aluminium
• Integral dimmable analog driver for remote monitoring and control
29
IberiaHPS
116W
0
1000
2000
3000
4000
5000
6000
Iberia LED
90W
Site
wat
tage
[W]
7000
8000
IberiaHPS
171W
IberiaCMH171W
IberiaHPS
116W
0
1000
2000
3000
4000
5000
6000
Iberia LED
90W
Site
wat
tage
[W]
7000
8000IberiaHPS
171W
IberiaCMH171W
2: Comparing light sources: Two cycleways
Location
1: 5900m2 urban park and pedestrian area 2: Two cycle ways with different widths: 5.3m and 2.5m
Requirement
Lighting designs optimised to meet these CIE requirements: E
av : 10 lux
Emin
: 3 lux
Case study: two urban park areas
BUS
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
Plaza de las Ciencias
Paraninfo
I
V
VII
I
IV
IV
VI
IV
IVIV
IV
IV
II
VI
I
IVII
20
18
FACULTAD DE MATEMÁTICAS
11
11
33
1 1
11
2
2
22
22
2
2
2
2
2
2
22
22
22
22
11
11
22
22
Cycleway 1
30
DUNA CMH IBERIA CMH SUPRA CMH IBERIA LED [III]
System Wattage [W] 171 171 171 95
Number of luminaires 58 59 53 40
Site Consumption [W] 9918 10,089 9063 3800
Energy increase versus LED
61% 62% 58% —
Re-lamping 3.5 3.5 3.5 12.5
W/m2 1.68 1.7 1.53 0.61
Payback final user Not needed initial investment is
higher
Less than one year Less than four years
• DUNA CMH – initial investment is higher than using LED solution
• IBERIA & SUPRA CMH – initial investment is lower than using LED, payback period is less than one year for the Iberia and 4 years for Supra
• 60% energy saving using LED instead of CMH
Section Spacing m2 Height [m]
Luminaire System [W]
Um UNDS [1000m]
Installation [W]
5.3m wide
31 164.3
4.5
IBERIA/LED T-3 95 0.28 33 3160
24 127.2 IBERIA/VT (HPS) 171 0.11 43 7296
21 111.3 IBERIA/VT (HPS) 116 0.13 49 5640
24 127.2 IBERIA/VT (CMH) 171 0.12 43 7296
2.5m wide
31 77.5
4.5
IBERIA/LED T-3 95 0.27 33 3160
27 67.5 IBERIA/VT (HPS) 171 0.08 38 6504
26 65 IBERIA/VT (HPS) 116 0.10 39 4578
26 65 IBERIA/VT (CMH) 171 0.10 39 6748
Choosing LED means:
• Higher spacing
• Better efficiency using LED (lux.m2/W)
• Lower site consumption
IBERIA LED light 90W vs 150W CMH
DunaCMH
0
2000
4000
6000
8000
10,000
12,000
Iberia LED
IberiaCMH
Site
wat
tage
[W]
SupraCMH
IberiaHPS
116W
0
1000
2000
3000
4000
5000
6000
Iberia LED
90W
Site
wat
tage
[W]
7000
8000
IberiaHPS
171W
IberiaCMH171W
IberiaHPS
116W
0
1000
2000
3000
4000
5000
6000
Iberia LED
90W
Site
wat
tage
[W]
7000
8000IberiaHPS
171W
IberiaCMH171W
1: Comparing light sources: Park and pedestrian area
Cycleway 2
31
Product dataPr
oduc
t Des
crip
tion
Num
ber
of m
odul
es
Opt
ics
Num
ber
of L
EDs
Wat
tage
[W]
Prod
uct C
ode
Prod
uct C
ode
LED Area Lighter 5700K 4000K
ALE SINGLE/ASY3/50/CCT SINGLE Asymmetric Forward 24 50 524835 524852
ALE SINGLE/ASY3/63/CCT SINGLE Asymmetric Forward 32 63 524836 524853
ALE SINGLE/ASY3/76/CCT SINGLE Asymmetric Forward 40 76 524837 524854
ALE SINGLE/ASY3/89/CCT SINGLE Asymmetric Forward 48 89 524838 524855
ALE SINGLE/ASY3/101/CCT SINGLE Asymmetric Forward 56 101 524839 524856
ALE DOUBLE/ASY3/126/CCT DOUBLE Asymmetric Forward 64 126 524840 524857
ALE DOUBLE/ASY3/139/CCT DOUBLE Asymmetric Forward 72 139 524841 524858
ALE DOUBLE/ASY3/152/CCT DOUBLE Asymmetric Forward 80 152 524842 524859
ALE DOUBLE/ASY3/165/CCT DOUBLE Asymmetric Forward 88 165 524843 524860
ALE DOUBLE/ASY3/178/CCT DOUBLE Asymmetric Forward 96 178 524844 524861
ALE DOUBLE/ASY3/190/CCT DOUBLE Asymmetric Forward 104 190 524845 524862
ALE DOUBLE/ASY3/202/CCT DOUBLE Asymmetric Forward 112 202 524846 524863
ALE DOUBLE/SM5/101/CCT DOUBLE Symmetric Medium 48 101 524847 524864
ALE DOUBLE/SM5/126/CCT DOUBLE Symmetric Medium 64 126 524848 524865
ALE DOUBLE/SM5/152/CCT DOUBLE Symmetric Medium 80 152 524849 524866
ALE DOUBLE/SM5/178/CCT DOUBLE Symmetric Medium 96 178 524850 524867
ALE DOUBLE/SM5/202/CCT DOUBLE Symmetric Medium 112 202 524851 524868
Opt
ics
Type
Col
our
Tem
p.
Syst
em
Con
sum
ptio
n
Sugg
este
d A
pplic
atio
n
LED FloodlightNarrow Spot NEMA (1x1) Symmetric
6000,4300,3000K
90W Architectural, Accent LightingMedium Flood NEMA (5x5) Asymmetric Medium 90W Site, Façade Lighting
Wide Flood NEMA (6x5 Asymmetric Wide 90W Site, Façade LightingPoster NEMA (6x5) Asymmetric Medium 90W Sign LightingBulletin NEMA (5x4) Asymmetric Wide 90W Sign Lighting
Prod
uct
Des
crip
tion
Num
ber
of
mod
ules
Opt
ics
Wat
tage
[W]
LED Road R250R250 SINGLE/ASY3/39/CCT SINGLE Asymmetric Type III 39
R250 SINGLE/ASY3/59/CCT SINGLE Asymmetric Type III 59
R250 DOUBLE/ASY3/78/CCT DOUBLE Asymmetric Type III 78
R250 DOUBLE/ASY3/98/CCT DOUBLE Asymmetric Type III 98
R250 DOUBLE/ASY3/118/CCT DOUBLE Asymmetric Type III 118
R250 TRIPLE/ASY3/138/CCT TRIPLE Asymmetric Type III 138
R250 TRIPLE/ASY3/158/CCT TRIPLE Asymmetric Type III 158
R250 TRIPLE/ASY3/178/CCT TRIPLE Asymmetric Type III 178
R250 QUADRUPLE/ASY3/197/CCT QUADRUPLE Asymmetric Type III 197
R250 QUADRUPLE/ASY3/217/CCT QUADRUPLE Asymmetric Type III 217
R250 QUADRUPLE/ASY3/237/CCT QUADRUPLE Asymmetric Type III 237
Wat
tage
[W]
Prod
uct
Des
crip
tion
Opt
ics
Prod
uct C
ode
Tunnel LED90 TUNNEL LED/AM ASY3 Asymmetric Medium 524678
90 TUNNEL LED/AW ASY2 Asymmetric Wide 524677
90 TUNNEL LED/SY SYM5 Symmetric 233003
32
Prod
uct
Cod
e
Des
crip
tion
Cod
e
Prod
uct
Des
crip
tion
Qua
ntity
Tetra® Contour – Accessories75514 9409 18 AWG Supply Wire (0.82mm2) 152.4 m/PK
75494 GEXNWB2 Weather Box (Outdoor Use Only) 20/PK
75498 GEXNMCAC Light Engine Mounting Clip 20/PK
75520 GEXNMC15 Light Guide Mounting Clip 50/PK
75537 GEXNBA Silicone Bend-Aid (Reuseable) 12/PK
75541 GEXNLG15 Tetra Contour Light Guide (2.44 m) - White 12/PK
75532 GEXNLGEC15 Tetra Contour Light Guide End Cap - White 20/PK
75533 GEXNLGC15 Tetra Contour Light Guide Connector - White 20/PK
74917 GE020/G/V24T1-B LED Driver 24 VDC/20W 1/PK
74915 GE080/G/V24T1-A LED Driver 24 VDC/80W 1/PK
For a full list of accessories, please download Contour “Parts Guide” at www.gelighting.com/eu/led/
Prod
uct C
ode
Prod
uct D
escr
iptio
n
LED
Col
our
Wav
elen
gth
/ C
olou
r Te
mp.
View
ing
Ang
le (l
ight
eng
ine)
View
ing
Ang
le (l
ight
en
gine
w/
light
gui
de)
Lum
ens
per
met
re (l
ight
eng
ine)
Lum
ens
per
met
re (
light
eng
ine
w/li
ght g
uide
)
Wat
ts p
er m
etre
(lig
ht e
ngin
e)
Wat
ts p
er m
etre
(sys
tem
)
Pack
Qty
*
Tetra® Contour – LED light engines75481 GERDXNLE1-A Red 625nm 110 330 194 154 10.63 12.50 12
75484 GEGLXNLE1-A Green 532nm 110 330 331 180 9.45 11.12 6
75485 GEBLXNLE1-A Blue 467nm 110 330 75 62 9.45 11.12 6
75487 GEWWXNLE1-27K-A White 2700K 110 330 351 230 9.45 11.12 6
75488 GEWWXNLE1-30K-A White 3000K 110 330 384 249 9.45 11.12 6
75489 GEWWXNLE1-35K-A White 3500K 110 330 410 266 9.45 11.12 6
75490 GEWWXNLE1-40K-A White 4000K 110 330 430 279 9.45 11.12 6
75493 GEWHXNLE1-50K-A White 5000K 110 330 512 331 9.45 11.12 6
75486 GEWHXNLE1-65K-A White 6500K 110 330 472 308 9.45 11.12 6
*Each LED light engine is 2.4 metres length
Wat
tage
[W]
Prod
uct
Des
crip
tion
Opt
ics
Prod
uct C
ode
Iberia LED90 IBERIA/E/LED ASY3/41 GRIS 150 SABLE Type III 78106
63 IBERIA/E/LED ASY4/41 GRIS 150 SABLE Type IV 78112
90 IBERIA/E/LED SYM5/41 GRIS 150 SABLE Type V 78107
Wat
tage
[W]
Prod
uct D
escr
iptio
n
Col
our
Tem
p.
Opt
ics
Prod
uct C
ode
Duna LED88 DUNA LED SYM5/41 4100 Type V 524553
88 DUNA LED SYM5/57 5700 Type V 524554
88 DUNA LED ASY3/41 4100 Type III 524555
88 DUNA LED ASY3/57 5700 Type III 524556
63 DUNA LED ASY4/41 4100 Type IV 524557
63 DUNA LED ASY4/57 5700 Type IV 524558
33
More about GE LEDsThe GE LED range encompasses the whole spectrum of lighting applications, indoors and outdoors, including a wide range of retrofit lamps.
The GE LED lighting catalogue ‘Efficiency, pure and simple’ contains detailed information about the entire range, which includes:
Retrofit Lamps
GE’s innovative LED retrofit lamps offer substantial opportunities to reduce energy consumption and maintenance costs. These lamps are true retrofits that enable dramatic reductions in cost of ownership.
LED Professional Lighting Solutions
GE LEDs have opened up a huge range of possibilities for lighting product designers. They enable precise light control, and the reduced heat output compared to other light sources is also a big advantage.
LED Retail Solutions
GE LEDs provide an excellent light source for the retail environment. They enable precise control of light and have very low heat emissions, reducing the cost of air conditioning and protecting heat-sensitive displays.
Architecture
GE believes that environmental responsibility and beautiful architectural design can exist simultaneously. GE’s architectural LED systems give lighting designers creative flexibility and at the same time offer enormous energy savings.
34
Bahrain,Iraq, Jordan, Kuwait, Lebanon, Oman, Pakistan, Qatar, UAE, Yemen GE International Inc. City Tower II, Sheikh Zayed Rd P.O.Box 52905 Dubai, UAE
Tel: (971) 4 3310 444 Fax: (971) 4 3315 930
Croatia, Slovenia, Bosnia and Herzegovina Media Light d.o.o. Exclusive agent of GE Hungary Kft. Lighting and Power Protection Cesta na Brdo 109 1000 Ljubljana Slovenia
Tel: (386) 1 530 4366 Fax: (386) 1 530 4361
Finland GE Consumer & Industrial Oy Kuortaneenkatu 2 00510 Helsinki, Finland
Tel: (358) 103942507 Fax: (358) 103942515
France & Benelux GE Lighting SARL ZAC Paris Nord II 13, rue de la Perdrix B.P. 50073, 95947 Roissy CDG Cedex France
Tel: (33) 1 48 63 68 00 Fax: (33) 1 48 63 68 08
Hungary GE Hungary Kft. 1044 Budapest, Váci út 77.
Tel: (36) 1 399 1100 Fax: (36) 1 399 1672
Italy GE Lighting srl Viale Brianza 181 20092 Cinisello Balsamo (MI) Italia
Tel: (39) 02 61773206 Fax: (39) 02 66017414
Netherlands GE Lighting Parallelweg 10 7482 CA Haaksbergen Netherlands
Tel: 0800 0232538
Saudi Arabia GE International Inc.CO 5th Floor, Tatweer Towers King Fahad Road, PO Box: 10211 Riyadh 11433, Saudi Arabia
Tel: (966 1) 207-3800
Spain GE Lighting Appliances España, s.a. Av Galileo Galilei 11 Parque Empresarial La Carpetania 28906 getafe, Madrid, Spain
Freephone in Spain: 900 993.612 Free fax in Spain: 900 993.609
Sweden GE Lighting AB Box 306, Solna strandväg 98 171 75 Stockholm Sweden
Tel: (46) 8 51 99 22 12 Fax: (46) 8 51 99 22 14
Turkey General Elektrik Turk Ltd. Sun Plaza, Dereboyu Sokak No. 24/6, Maslak, Istanbul 34398 Turkey
Tel: (90) 212 366 28 00 Fax: (90) 212 366 28 40
United Kingdom GE Lighting Ltd. Houghton Centre Salthouse Road Brackmills Northampton NN4 7EX United Kingdom
Tel: (44) 800 169 8290 Fax: (44) 800 169 8284
Other regions A full list of international sales offices is available in the Spectrum catalogue, or at www.gelighting.com/eu
Need help?If you are considering LED for a project, we can help.
GE can assist with time-saving information such as luminaire data, lighting calculations, and payback calculations. We can also provide useful information about similar projects which have benefitted from GE LED technology.
Main sales offices
GE Lighting is constantly developing and improving its products. For this reason, all product descriptions in this brochure are intended as a general guide, and we may change specifications from time to time in the interest of product development, without prior notification or public announcement. All descriptions in this publication present only general particulars of the goods to which they refer and shall not form part of any contract. Data in this guide has been obtained in controlled experimental conditions. However, GE Lighting cannot accept any liability arising from the reliance on such data to the extent permitted by law. Pictures in this publication are for illustrative purpose only.
and General Electric are registered trademarks of the General Electric Company. ©2011
www.gelighting.com/eu
Outdoor LED Luminaires brochure - April 2011