Transcript
Page 1: Logging into Five9 Telephony CATI 2016/STC_RP.pdf · Logging into Five9 Telephony Go to the Citrix Receiver at Log in using your Wins# as your User Name and your Citrix password,

1 | P a g e

Logging into Five9 Telephony Go to the Citrix Receiver at https://xasg.westat.com Log in using your Wins# as your User Name and your Citrix password, click Log On.

The first time you log in on your PC, you will should be automatically prompted to download the new Citrix Receiver Client software. Refer to the Installation Guide for more details. If you have problems loading the receiver, reference the Troubleshooting Guide. Click on the TRC Desktop Icon

The Citrix Receiver should load, you might need to click on the icon in your tray. You will receive our Warning page. Click OK

Page 2: Logging into Five9 Telephony CATI 2016/STC_RP.pdf · Logging into Five9 Telephony Go to the Citrix Receiver at Log in using your Wins# as your User Name and your Citrix password,

2 | P a g e

Double click on the Project Folder on the desktop

Once the folder opens, double click on Five9 Inc. Virtual Contact Center Login

If you see this message, click on Don’t Show this Message again.

Page 3: Logging into Five9 Telephony CATI 2016/STC_RP.pdf · Logging into Five9 Telephony Go to the Citrix Receiver at Log in using your Wins# as your User Name and your Citrix password,

3 | P a g e

FOR RP TRAINING ONLY – log in using the trainee username and password from your role play email.

PLEASE BE PATIENT WHILE THE TELEPHONY SYSTEM LOADS! You will only see the applications that you are assigned to. On the Five9 Applications screen, click on the AGENT application. Again, BE PATIENT WHILE THE SYSTEM LOADS.

Page 4: Logging into Five9 Telephony CATI 2016/STC_RP.pdf · Logging into Five9 Telephony Go to the Citrix Receiver at Log in using your Wins# as your User Name and your Citrix password,

4 | P a g e

If you receive this Java message, click “Later.”

Java will load the agent application

The Five9 Agent Application will start.

Page 5: Logging into Five9 Telephony CATI 2016/STC_RP.pdf · Logging into Five9 Telephony Go to the Citrix Receiver at Log in using your Wins# as your User Name and your Citrix password,

5 | P a g e

Select Run

You will be prompted to log in. FOR RP TRAINING ONLY – log in using the trainee username and password from your role play email.

Username is your WINS

Enter your password

Station – Enter your phone number

Make sure that Station Type is PSTN

Page 6: Logging into Five9 Telephony CATI 2016/STC_RP.pdf · Logging into Five9 Telephony Go to the Citrix Receiver at Log in using your Wins# as your User Name and your Citrix password,

6 | P a g e

You will receive this Alert telling you that it is starting your application.

Click Yes to Would you like to connect your station?

Your telephone will ring, pick up the receiver and keep it off the hook while working. You will not hang up the phone unless you are going on a break, or logging out for your shift. When you pick up your telephone, you will hear 3 beeps. This tells you that you are logged into the telephony system. If you did not hear the connection tones, you can retry on this screen. If you heard them, click OK.

Page 7: Logging into Five9 Telephony CATI 2016/STC_RP.pdf · Logging into Five9 Telephony Go to the Citrix Receiver at Log in using your Wins# as your User Name and your Citrix password,

7 | P a g e

You will now need to select the Skill you will be working on. On this list are all of the projects that you are assigned to. By default, all of the projects you are assigned to will be checked. Make sure that only the project you are working at the time of your scheduled shift is checked. SELECT STC - TRAINING

If you are having trouble seeing the entire project’s name, you can expand the box by hovering near an edge until you see the arrow, then click and drag the box to open it more.

Page 8: Logging into Five9 Telephony CATI 2016/STC_RP.pdf · Logging into Five9 Telephony Go to the Citrix Receiver at Log in using your Wins# as your User Name and your Citrix password,

8 | P a g e

The Five9 VCC AGENT This is your telephony application Summary Screen. Most areas of this screen will not be used. Notice that there is an area labeled SKILL GROUP MESSAGES. Before you can log into your project, you must follow the instructions here. Make sure you follow these steps before launching your project instrument:

1. Press Ctrl+M 2. On the manual dial screen, select speed dial 001 Manual Dial Connection Test 3. Select your project from the Campaign dropdown menu (if you do not see a dropdown menu, click the “>>Details” button) 4. Click “Make Call.” Your project's script will load. Continue following these steps on your project script. (Screenshots of these steps are on the next page.)

Page 9: Logging into Five9 Telephony CATI 2016/STC_RP.pdf · Logging into Five9 Telephony Go to the Citrix Receiver at Log in using your Wins# as your User Name and your Citrix password,

9 | P a g e

After you CTL/M, you receive the manual dial box. Make sure that Speed Dial number 001 (Manual Dial Connect Test) is selected. It should be the first option on your list.

Next, click the drop down arrow under the “Campaign” field and select your project.

Then click Make Call.

Page 10: Logging into Five9 Telephony CATI 2016/STC_RP.pdf · Logging into Five9 Telephony Go to the Citrix Receiver at Log in using your Wins# as your User Name and your Citrix password,

10 | P a g e

If for any reason Ctrl/M does not bring up your dialer. Go to Actions on the menu at the top of the screen, and select Make Call

Page 11: Logging into Five9 Telephony CATI 2016/STC_RP.pdf · Logging into Five9 Telephony Go to the Citrix Receiver at Log in using your Wins# as your User Name and your Citrix password,

11 | P a g e

Once you are sure you are connected to your project page, click WrapUp Call. Wrap up disconnects the call, but does not close out the case. This allows you to complete any steps needed before accepting another call.

Page 12: Logging into Five9 Telephony CATI 2016/STC_RP.pdf · Logging into Five9 Telephony Go to the Citrix Receiver at Log in using your Wins# as your User Name and your Citrix password,

12 | P a g e

Once you are sure you are logged into the correct project in this telephony software, you will not be able to make another call until you set a Voice Disposition. Click on the drop down arrow on the Set Voice Disposition field and set the disposition to ALL DISPOSITIONS. Every call will have this disposition regardless of the outcome of your call.

Page 13: Logging into Five9 Telephony CATI 2016/STC_RP.pdf · Logging into Five9 Telephony Go to the Citrix Receiver at Log in using your Wins# as your User Name and your Citrix password,

13 | P a g e

If you did not select your project from the Campaign menu before making the call and left the default Manual Dial Check, you will see the following error:

Repeat the steps on the screen making sure that your Project’s script loads.

Page 14: Logging into Five9 Telephony CATI 2016/STC_RP.pdf · Logging into Five9 Telephony Go to the Citrix Receiver at Log in using your Wins# as your User Name and your Citrix password,

14 | P a g e

Log into your CATI Project’s Instrument:

Once you have made your initial setup call and are on your correct project script page, you will scroll down through the script to the link for launching your project links. The script may also contain other important information such as your project’s FAQs. Click on YOUR PROJECT’S LINKS AND LOG IN.

Page 15: Logging into Five9 Telephony CATI 2016/STC_RP.pdf · Logging into Five9 Telephony Go to the Citrix Receiver at Log in using your Wins# as your User Name and your Citrix password,

15 | P a g e

ROLE PLAYS RESPONDENT ROLE - You will set your status as “Ready Call&VM” in order to receive

a call from a trainee acting as the Data Collector.

You will wait on your script screen until an inbound call comes in. When you get a call, you will see the Incoming Call pop-up screen and you will hear a voice prompt on your phone line that says ‘Your call is connected.’ Be prepared to start talking immediately after hearing the prompt.

DATA COLLECTOR ROLE - You will set your status as “outbound calling” in order to

dial your Role Play partner.

Ctrl/M

Select STC – Training from the Speed dial list (or you can type 301 into the phone number field.

Click ‘Make Call.’

Page 16: Logging into Five9 Telephony CATI 2016/STC_RP.pdf · Logging into Five9 Telephony Go to the Citrix Receiver at Log in using your Wins# as your User Name and your Citrix password,

16 | P a g e

You will hear hold music with a hold prompt until another trainee is available to take your call. Wrapping Up a Case After the case is complete, you will need to wrap up the call. This will disconnect your partner and you can proceed to code the screens in your project instrument without interruption until you are ready. (Note: If the caller hangs up before you WrapUp the call, you will not need to press this button. You will see a ‘Caller Disconnected’ prompt and you will automatically be in WrapUp mode.

When you are completely done with the case, you need to set the Voice Disposition. You will not be able to make a call or receive another inbound call until this done. Once you set the disposition, your status will automatically be set to ‘Ready.’ BOTH TRAINEES WILL NEED TO COMPLETE THIS STEP!

Page 17: Logging into Five9 Telephony CATI 2016/STC_RP.pdf · Logging into Five9 Telephony Go to the Citrix Receiver at Log in using your Wins# as your User Name and your Citrix password,

17 | P a g e

TAKING A BREAK - If you need to take a break you should click on the drop down arrow next to your status indicator on the top left of the screen in the VCC Agent, and click the reason. The bullet next to the reason should be RED. YOU SHOULD HANG UP YOUR PHONE DURING A BREAK but do not log out of the VCC Agent.

RECONNECTING PHONE - If you hang up your phone for a break or your phone line gets disconnected from the VCC Agent for any reason, you can reconnect by going to Actions on the menu and selecting ‘Restart Station.’

Page 18: Logging into Five9 Telephony CATI 2016/STC_RP.pdf · Logging into Five9 Telephony Go to the Citrix Receiver at Log in using your Wins# as your User Name and your Citrix password,

18 | P a g e

Logging out of Five9 VCC Agent In the VCC, go to Actions, Logout & Exit

Click YES.

When you get back to the Five9 login screen, click on Log Out. Then close all windows and log out of Citrix.


Top Related