-
8/13/2019 LTM 1100-5.2 (100t Capacity Mobile Crane)_advantages
1/18
LTM 1100-5 .2Mobile CraneMax. capacity: 100 tMax. hoisting height: 84 mMax. radius: 66 m
-
8/13/2019 LTM 1100-5.2 (100t Capacity Mobile Crane)_advantages
2/18
LTM 1100-5. 22
Mobile crane LTM 1100-5.2Flexibly and economically usable
-
8/13/2019 LTM 1100-5.2 (100t Capacity Mobile Crane)_advantages
3/18
-
8/13/2019 LTM 1100-5.2 (100t Capacity Mobile Crane)_advantages
4/18
LTM 1100-5. 24
Drive train
6-cylinder Liebherr turbo-diesel engine,370 kW/503 HP at 1900 rpm, max.torque 2340 Nm at 1500 rpm
Automated ZF AS-TRONIC gearbox,12 forward and 2 reverse speeds
ZF-intarder directly at gearbox
Axles 2, 4 and 5 driven, optional axle 1
-
8/13/2019 LTM 1100-5.2 (100t Capacity Mobile Crane)_advantages
5/18LTM 1100-5. 2 5
4 0 0 0
1144313261
S2471
2325
7386
2 7 5 0
5 0 0 0
R = 1 0 1 7 5 R = 1 0 6 9 0
7361
R = 3 9 7 2
384013743
7 0 0 0
R = 3 8 4 0
12 t445/95 R 25(16.00 R 25)
12 t 12 t 12 t 12 t
R = 1 1 2 7 0
Most modern chassis and drive technology
Hydro-pneumatic suspensionNiveaumatik
Maintenance-free suspension cylin-ders
Large dimensions to cope with highaxle loads
Suspension travel +150/-100 mm
High lateral stability when cornering
Choice of driving states using xed
programmes
Telma eddy current brake (option)
No wear, low maintenance system
Increased safety due to fast activation in mil-liseconds
Reduction of operation costs
High comfort due to braking absolutely with-out jolts
Environmentally friendly brake system, noemission and respirable dust
High mobility and efciency A powerful 6-cylinder Liebherr turbo-diesel engine with 370 kW/503 HP ensuresswift driving performance. The automatic 12-speed power shift system ZF-AS-TRONIC with intarder provides a high level of cost effectiveness and excellentcomfort.
Reduced fuel consumption due to the large number of gears and the highefciency of the dry clutch
Best manoeuvrability and minimum crawling speed due to 2-speed distribu-tion gearbox
Wear free braking with ZF-intarder
Telma eddy current brake optional, wear free and comfortable
Compact, mobile and weight-optimised
Thanks to its extremely compact design, the LTM 1100-5.2 can also operate onthe smallest of construction sites.
Chassis length only 11.44 m
Smallest turning radius only 10.18 m
Vehicle width only 2.75 m, even with tyres 445/95 R 25 (16.00 R 25)
Tail swing radius only 3.84 m
-
8/13/2019 LTM 1100-5.2 (100t Capacity Mobile Crane)_advantages
6/18
LTM 1100-5. 26
5 steering programs
Selection of programme by simplepush button
Clear layout of control elements anddisplays
Programmes changeable duringdriving
Crab steering comfortably con-trolled by steering wheel
-
8/13/2019 LTM 1100-5.2 (100t Capacity Mobile Crane)_advantages
7/18LTM 1100-5. 2 7
Variable steering concept
Active rear-axle steeringThe rear axles are actively electro-hydraulically controlled in accordance withthe speed and steering angle of the front axle.Five different steering programmes (P) can be selected by touch button.
Remarkably reduced tyre wear
Improved manoeuvrability
Stable driving condition even at high speeds
All 5 axles steerable, no lifting of centre axle on crab steering
High safety standards entire know-how from Liebherr Centring cylinder for automatic straightening of rear axles in case of failure
Two independent hydraulic circuits with wheel- and engine driven hydraulicpump
Two independent control computers
P1 Road steering
The axles 1 and 2 are steered mechanically bythe steering wheel. The axles 3, 4 and 5 aresteered actively speed depending and subjectto the axle lock of the front axles. From 30 km/hthe axles 3 and 4 are set to straight driving andlocked. At speeds higher than 60 km/halso the axle 5 is set to straight drive andlocked.
P2 All-wheel steering
The axles 3, 4 and 5 are turned dependingof the axle lock of the front axles by thesteering wheel so far that smallest turningradii are achieved.
P3 Crab steering
The axles 3, 4 and 5 are turned in thesame direction as the wheel lock on axles
1 and 2 by the steering wheel.
P4 Reduced swing out
The axles 3, 4 and 5 are turned depend-ing on the axle lock of the front axles, sothat the swing out of the chassis rear getsminimized.
P5 Independent rear-axle steering
The axles 1 and 2 are turned by using thesteering wheel; the axles 3, 4 and 5 aresteered by push button independentlyfrom the axle lock of the axles 1 and 2.
Centring cylinder at the rear axles
Automatic straightening of rearaxles in case of failure
-
8/13/2019 LTM 1100-5.2 (100t Capacity Mobile Crane)_advantages
8/18
LTM 1100-5. 28
The drivers cab
Corrosion-resistant steel plate execu -tion, cataphoretic dip-primed steel
Doors in bre composite executionwith electric window winders
Safety glass on all sides
Tinted glass
Heated and electrically adjustableoutside mirrors
Air-sprung drivers seat with lumbarsupport
-
8/13/2019 LTM 1100-5.2 (100t Capacity Mobile Crane)_advantages
9/18LTM 1100-5. 2 9
700
The crane cab
Corrosion resistant, galvanized steelplate execution, powder coated
Safety glass on all sides
Tinted glass, hinged front window foropening
Roof window with bullet proof glass
Operators seat with lumbar support
Extendable side landing
20 tiltable to the rear
Supporting crane on outriggers quick, comfortable and safe
BTT blue tooth terminal, mobile controland display unit
Electronic inclination display
Fully automatic levelling by push button
Engine start/stop and speed control
Support area lighting with four integratedlights
Support cylinder stroke:front 650 mm, rear 700 mm
Outrigger beams 1-stage,fully hydraulic, low-mainte-nance extension system
Modern drivers cab and crane cabBoth the modern drivers cab and the rearwards tiltable crane cab offer a com-fortable and functional working environment. The control elements and displaysare ergonomically arranged. Thus a safe and fatigue free working is assured.
Speedy and safe set-upSetting of the outriggers, counterweight assembly and attachment of addition-al equipment have all been designed with speed, safety and comfort in mind.Speci c ascents, handholds and rails are provided to ensure the safety of theoperating staff.
Comfort and functionality
-
8/13/2019 LTM 1100-5.2 (100t Capacity Mobile Crane)_advantages
10/18
LTM 1100-5. 210
The fully automatic telescoping systemTELEMATIK
Increase of capacities at long booms andwider radii due to light telescoping sys-tem
Single stage hydraulic cylinder with hy-draulically activated drive pin
Maintenance free telescoping system
Telescoping fully automatic
Simple operation, monitoring of the tel-escoping procedure at LICCON-monitor
2.9 m long assembly jib
-
8/13/2019 LTM 1100-5.2 (100t Capacity Mobile Crane)_advantages
11/18LTM 1100-5. 2 11
High-capacity, long telescopic boom andfunctional lattice extensionsThe telescopic boom comprises of the base section and 5 telescopic sections,which can be comfortably and automtically extended and pinned to the re-
quested lengths by the thousand fold proven single cylinder telescoping systemTELEMATIK.
52 m long telescopic boom
10.8 m 19 m long double swing away jib, attachable at 0, 20 and 40
Hydraulic adjustment of the swing away jib under full load from 0 40(option), interpolation of the load charts
Hydraulic assembly assistance for attaching of the swing away jib with the BTT
2 sections 7 m each for extending the telescopic boom for operation withswing away jib
High lifting capacities both with full and partialcounterweight offer a wide operational range High lateral stability due to the oval boom pro le
Optimised load charts due to multitude of extension versions
Load 11.5 t at 52 m long telescopic boom
High capacities at unpinned telescopic lengths High telescopable loads due to interpolation
Separate load charts for holding the loads at unpinned telescopic lengths
Display at LICCON-monitor
High lifting capacities and exible boom system
Boom nose, sidewise folding
Hydraulic assembly supportfor attaching the
swing away jib by BTT
Holding capacity
Unpinned telescope length
Telescopable load
-
8/13/2019 LTM 1100-5.2 (100t Capacity Mobile Crane)_advantages
12/1810
12
14
16
18
2022
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
82
84
86
88
90
92 m
20
40
Hydraulic swing away jib
-
8/13/2019 LTM 1100-5.2 (100t Capacity Mobile Crane)_advantages
13/18
Variable counterweight
Counterweight assembly a matter of minutes Multiple counterweight variations from 6.5 t to 35 t
Rapid ballasting with keyhole technology from within the crane cab
Compact counterweight dimensions, at 26 t ballast and double swing away jib only 2.75 m ballast width
Tail swing only 3.84 m
60 t total weight incl. 11.5 t ballast and double swing-away jib at 12 t axle load
Basic counterweight 15 t Additional counterweight I 11 t Additional counterweight II 9 t
4.5 t
3.5 t
5.0 t
3.0 t
8.0 t
6.5 t
4.5 t
-
8/13/2019 LTM 1100-5.2 (100t Capacity Mobile Crane)_advantages
14/18
LTM 1100-5. 214
The hoist gear
Liebherr hoist winch with internalplanetary gear and spring loadedmultiple disk brake
Rope pull 88 kN at the outer layer
Max. rope speed 130 m/min
2. hoist gear optional
-
8/13/2019 LTM 1100-5.2 (100t Capacity Mobile Crane)_advantages
15/18LTM 1100-5. 2 15
With tried-and-tested componentsThe drive components for crane operation are designed for high performance andensure sensitive and precise load handling. They are specially designed to suit thecranes usage and have been subjected to hard endurance tests.
Crane engine: 4-cylinder Liebherr turbo diesel engine, 129 kW/175 HP at1800 rpm, max. torque 920 Nm at 1500 rpm, optimised fuel consumption due toelectronic engine management
Diesel-hydraulic crane drive, open hydraulic circuits with electronic LOADSENSING control, 4 working movements simultaneously possible
Electric/electronic SPS crane control through the LICCON computer system
Slewing system changeable from open to hydraulically locked as standard, thusthe movement can be adjusted to the different operational conditions, e. g. sen-sitive control for assembly work or fast cycle work
In-house manufactured Liebherr winches, 88 kN rope pull at the outer layer, due
to high rope pull less rope reeving necessary
High-power crane drive
The slewing gear
Liebherr planetary gear, spring loadedmultiple disk brake
Changeable as standard:open or hydraulically locked
Slewing speed from 0 2 rpm steplessadjustable
The central greasing
Central greasing device for slewingbearing, boom bearing, lufng cylin-der and winch bearing as standard
Even supply with grease
Filling amount in transparent con-tainer visible at any time
LICCON-Monitor
Control sensor with Touch-Displays
Control unit
Telescopingcylinder
Lufngcylinder
Control block
Hoist gear Slewing gear
Gear type pump
Double variable axial piston pump
Liebherrdiesel engine
Sensor
-
8/13/2019 LTM 1100-5.2 (100t Capacity Mobile Crane)_advantages
16/18
LTM 1100-5. 216
The LICCON test system
Rapid localisation of problems on-screen without any measuring instru-ments
Display of error codes and descrip-tions
Convenient interactive functions formonitoring all inputs and outputs
Displays of functions and allocation ofsensors and actuators
-
8/13/2019 LTM 1100-5.2 (100t Capacity Mobile Crane)_advantages
17/18LTM 1100-5. 2 17
The LICCON work area limitation systemoptional)
Relief for the crane operators job by auto-matically monitoring workspace restrictionssuch as bridges, roofs, power lines, etc.
Simple programming
Four different limitation functions:- Pulley-head height limitation- Radius limitation- Slewing angle limitation- Edge limitation
The LICCON works planner (optional)
Computer programme for planning,simulating and documenting crane op-erations on a PC
Representation of all the cranes loadcharts
Automatic search for suitable cranebased on entry of load, radius and liftingheight parameters
Simulation of crane operations withoutline functions and supporting forcedisplay
For functional and safe crane operation,the LICCON computer systemThe soft- and hardware of the mobile crane control is in-house developed byLiebherr. In the centre is the LICCON computer system (Liebherr ComputedControlling). The system undertakes comprehensive information, control andmonitoring tasks. The control components have proven themselves worldwidein the various climate conditions.
LICCON conguration and operating programme Application programmes:
- Safe load indicator (LMB)- Con guration programme with con guration display- Operating programme with operating display- Telescoping programme with telescoping display
Setting of the con guration by convenient interactive functions
Display of all important data using graphic symbols
Reliable cut-off when permissible load moments are exceeded
Winch indications for highly precise lifting/lowering of load
Data bus technology Liebherr mobile cranes are fully interlaced using data bus systems. All majorelectric and electronic components are tted with their own microprocessorsand communicate with each other via only a small number of data cables. Lieb-herr has developed a bus system to meet the special demands of mobile cranes(LSB Liebherr-System-Bus). The data bus technology increases reliability,comfort and safety when driving and operating the cranes:
Improved reliability due to greatly reduced number of electric cables andcontacts
Constant self-testing of the intelligent sensors
Extensive diagnosis possibilities, fast fault nding
Intelligent crane control
-
8/13/2019 LTM 1100-5.2 (100t Capacity Mobile Crane)_advantages
18/18
Liebherr-Werk Ehingen GmbH
PN 206.00.E05.2011 The illustrations contain also attachments and special equipment, which are not included in the standard scope of delivery.
The new control generation LICCON2
Colour monitor
The readability of the data onthe monitor of the LICCON2control unit in the crane cabinis improved by the colourdisplay. Warning indicationsand crane utilisation are moreclearly visible.
Attaching and detachingthe hook block
The BTT - Bluetooth terminal allowsthe crane driver to attach the hookblock to or detach it from the frontbumper within view by remote controlof the hoist gear and the lufng cylin-der of the telescopic boom.
The new generation of the Liebherr crane control offersan extended customer value and higher control comfortby additional user possibilities. The base for this is themodern and future oriented control architecture withcomponents, which have been optimized for computingpower and capacity.
Touch display
Below the joysticks integratedin the arm rest touch displaysare provided with which vari-ous working functions can beselected. Beside others theseare the drive and steeringprogrammes of the carrier,the supporting of the crane,the adjustment of the workingoodlights as well as the heat-ing and ventilation control.
Crane support
By use of the BTT the mobile crane willbe setup comfortably and safely. En-gine start/stop and speed regulation,electronic inclination display and auto-matic levelling are standard. Optionallythe BTT can also display the outriggerforces.
Wireless remote control (optional)